RIVET SHELVING
DURABLE SHELVING IDEAL FOR USE IN
WAREHOUSES, OFFICES AND RETAIL STORES
MADE IN SOUTH AFRICA www.krostshelving.co.za
BOLTLESS RIVET SHELVING COMPONENTS
Standard Beam Lengths
Front & Back Beam 1200mm
Side Beam 300mm
400mm
500mm
600mm
Non-standard sizes can be manufactured on request.
Uniformly distributed load capacity on a pair of
standard single or double 1200mm long beams
can be up to 200 kgs.
BEAM PROFILES:
Single Rivet Beams
Primarily used as an intermediate shelf support when
maximum vertical space between levels is needed.
Double Rivet Angle Beams
Used to establish unit stability and to provide shelf support
on all four sides.
Double Rivet Z Step Beams
Provides increased load capacity in the longer lengths and
protects decking edges.
Angle uprights are 40mm x 40mm x1.6mm and are manufactured in the following
standard lengths: 1600mm
1800mm
2000mm
2200mm
2400mm
SINGLE RIVET HIGH DENSITY UNIT
Single rivet high density shelving uses single rivet beams on intermediate
levels, and double rivet beams at the top and bottom for rigidity.
3
Krost single rivet beam high density shelving is designed to
provide for maximum vertical clearance between shelves.
1
4 Access to stored items from all sides is possible because side
and back cross braces are not necessary for stability.
Krost Rivet Shelving is designed to provide an economical
solution for the storage and display of retail, wholesale or
4 industrial goods. Installation can be done without special
3
tools in a minimal amount of time. All you need is a rubber
mallet. Shelves can be adjusted every 37.5 mm which allows
you to custom design the unit to fit your load size. Krost Rivet
Shelving can be decked with either chipboard, plywood or
steel decking.
2 Component Parts
1. Angle Post
1 2. Front Beam
3. Side Beam
2
4. Steel or Timber Deck
Paint Process
All our products have a baked epoxy powder coated finish and pass through a
5-stage chemical cleaning process. Powder is applied to an average thickness of
55 microns as per SABS 1274-1979, type 2 method 141 prior to oven baking at 210
degrees Celsius for 15 minutes. All paint specifications are independently
verified to conform to SABS standards by Corrosion Advisory
Technical Services.
KROST SHELVING
Krost Industrial Park - 62 Lower Germiston Road, Heriotdale, Johannesburg, South Africa
P.O. Box 40781, Cleveland 2022
Tel: +27 (0) 11 626 2651 Fax: +27 (0) 11 626 2057
Website: www.krostshelving.co.za Email: sales@krostshelving.co.za