www.normalab.com
ASTM D 613 - IP 41 & D 2699 -ISO EN 25164 - ISO 5163 - IP 237 - DIN 51756 & D 2700 -ISO
EN 25163 - ISO 5164 - IP 236
SCOPE: APPLICATIONS:
This test method determines the rating of diesel fuel oil in terms Diesel fuel oil.
of an arbitrary scale of cetane numbers using a standard single
cylinder, four-stroke cycle, variable compression ratio, indirect
injected diesel engine.
REFERENCE & CHECK FUEL BLENDING FOR OCTANE & CETANE MEASUREMENT
- Model NABLEND 88XX -
NABLEND series of automatic blending units have been designed to automate the blending procedure of reference and
check fuels for octane and cetane number measurement. The instrument can be used for other hydrocarbon blending
purposes where the accuracy and the speed of the procedure are critical.
MAIN CHARACTERISTICS
ª Ease for use and accuracy
Using the built-in touch screen the operator will only type the
target octane/cetane number and the sample volume and the
blending unit will automatically prepare and certify the
reference fuel with an accuracy of 0.01 ON or CN.
ª Quick blending
From 2 to 4 minutes depending on the samples sizes.
ª Results traceability
The results are also stored in a n internal database and
certificates can be printed out for all blends.
SOFTWARE CHARACTERISTICS
ª Compatible LIMS
XML based internet user interface:
An unlimitted number of units can be remotely accessed and
controlled from any authorized PC from the network.
ª BLENDING CONTROL
The strokes of the dosing pumps will be decreased below
10mg/stroke at the end of a dosing cycle, in order to reach
NABLEND is used in
nearly perfect accuracy at the highest speed. conjunction with octane,
ª Access to maintenance and calibration of tanks and research and cetane engines
pumps.
ª Complete database
- Reference and check fuel blending
The database will not only store the blending parameters, but
- Built-in touch screen computer and printer
the whole history of logins, operation, remote database
- Complete and automatic documentation of
Final PRF is mixed in prepared reference fuels
solvent proof dedicated - Excellent accuracy and speed
bottles of maximum - Full remote management and service over the
capacity 1litre. internet or direct phone or GSM/GPRS
connection
Clean and comfortable use
NORMALAB FRANCE SAS
14 rue des Lilas - F-76 210 Lintot DISTRIBUTED BY
Tel. : +332 35 38 59 59 - Fax : +332 35 38 78 55
NORMALAB BELGIUM S.A.
Parc Industriel
28 rue des Pieds-d’Alouette - BE-5100 NANINNE / Belgium
Tel : +32 81 71 19 90 - Fax : +32 81 22 27 01
www.normalab.com
REFERENCE 52000
Model NABLEND 8875, automatic stand alone unit with 2 fluid
channels, for blending cetane reference fuels according ASTM
D613 composed of two blending components: nCetane, AMN or
HMN, or U and T components.
REFERENCE 52100
Model NABLEND 8873, automatic stand alone unit with 3 fluid
channels, for blending octane reference and check fuels
according ASTM D2699 and D2700 composed of two blending
components: iso-octane, normal heptane and toluene.
REFERENCE 52200
Model NABLEND 8877 automatic stand alone unit with 5 fluid
channels, for blending octane and cetane reference and check
fuels according ASTM D613, ASTM D2699 and ASTM D2700
composed of three blending components: iso-octane, normal
heptane and toluene for octane and two blending components:
nCetane, AMN or HMN, or U and T components for cetane.
REFERENCE 52300
Model NABLEND 8879 automatic stand alone unit with 6 fluid
channels, for blending octane and cetane reference and check
fuels according ASTM D613, ASTM D2699 and ASTM D2700
composed of four blending components: iso-octane, normal
heptane, 80/20 blend and toluene for octane and two blending
components: nCetane, AMN or HMN, or U and T components
for cetane.
MAIN CONSUMABLE
REF 52001 Bottle, solvent resistant with cock (1L)
SPARE PARTS
REF 52002 Dosing pump
REF 52003 Printer paper (roll)
REF 52004 Fuel filter
REF 52005 Solenoid valve
REF 52006 Injection head O-ring
NORMALAB FRANCE SAS
14 rue des Lilas - F-76 210 Lintot DISTRIBUTED BY
Tel. : +332 35 38 59 59 - Fax : +332 35 38 78 55
NORMALAB BELGIUM S.A.
Parc Industriel
28 rue des Pieds-d’Alouette - BE-5100 NANINNE / Belgium
Tel : +32 81 71 19 90 - Fax : +32 81 22 27 01
