Submersible pumps

for dewatering, sewage, marine and rental markets.

AFEC pumps – best return on investment


 Introduction

AFEC Pumps; a complete line of submersible pumps

offering Best Return on Investment.

Nothing but the best will do. AFEC Pump is a premier ISO certified manufac-
turer of electric submersible pumps.

We offer;
• Decades of professional manufacturing experience in
submersible pumps.
• Superior capability in design, testing and production.
• A compact and sturdy line of pumps in compliance with
international standards.
• Professional technical and sales support.

AFEC Pumps Europe BV, established in 2002 as the European distributor,

holds a wide stock of pumps and spare-parts. Based in the Netherlands it
assures support in sales and service as you expect it to be.

AFEC pumps have proven to be reliable in the thoughest conditions as

faced in construction, rental and sewage applications. This combined with
our experience, knowlegde and enthousiasme makes partnership in pump
business.


 All professional designed contractorpumps do have more
or less the same construction.
Topdischarge The pumps need to be reliable, high resistant and have to
work under the most heavy conditions.
Double ball
bearings.
Lubricated AFEC submersible dewatering pumps
for life
are all executed with:
Thermal
• Quality, double mechanical seal in
Stainless steel
outercasing overload- oilchamber.
protection
• Stainless steel shaft.
• Wear resistant impeller and wearplate.
Cooling
Motor • Complete sealed watertight cable inlet.
jacket
isolation • Quality motors IP 68.
class F
• Thermal overload protection.
Double mechanical
seal in oilchamber
What makes AFEC different:
• Competitive to all others with the best Return
on Investment.
Suction Chrome steel • Modular system.
diffusor impeller
• Easy in service and maintenance.
• Excellent performance in silty waters.


 Index

Dewatering / drainage Sewage

FS series top discharge BV series sewage pumps
Type Discharge / kW Voltage Page Type Discharge / kW Voltage Page
FS 400 2” / 0,4 230 5 BV 204 2” / 0,4 230 14
FS 750 2” / 0,75 230 5 BV 208 2” / 0,75 230 14
FS 1500 (S) 2” / 1,5 230-400 5 BV 315 (S) 3” / 1,5 230-400 14

FS 215 (S) 2” / 1,5 230-400 6 BV 322 3” / 2,2 400 15

FS 315 (S) 3” / 1,5 230-400 6 BV 337 3” / 3,7 400 15
BV 455 4” / 5,5 400 15
FS 222 2” / 2,2 400 7
FS 322 3” / 2,2 400 7

special applications
FS 237 2” / 3,7 400 8
FS 337 3” / 3,7 400 8 FSR residue pump
FS 437 4” / 3,7 400 8 Type Discharge / kW Voltage Page
FSR 400 1” / 0,4 230 16
FS 355 3” / 5,5 400 9 FSR 400 2” / 0,4 230 16
FS 455 4” / 5,5 400 9
FSS stainless steel pumps
FS 475 4” / 7,5 400 10 Type Discharge / kW Voltage Page
FS 675 6” / 7,5 400 10 FSS 250 2” / 0,25 230 17
FSS 400 2” / 0,4 230 17
FS 4110 4” / 11 400 11 FSS 750 2” / 0,75 230 17
FS 6110 6” / 11 400 11
FLS contractor pump
FS 4220 4” / 22 400 12 Type Discharge / kW Voltage Page
FS 6220 6” / 22 400 12 FLS 400 2” / 0,4 230 18
FS 8220 8” / 22 400 12
LB small submersible pumps
KO series side discharge Type Discharge / kW Voltage Page
Type Discharge / kW Voltage Page LB 15 1” / 0,15 230 19
KO 204 2” / 0,4 230 13
KO 208 2” / 0,75 230 13
KO 215 (S) 2” / 1,5 230-400 13
KO 315 (S) 3” / 1,5 230-400 13

AFEC pumps – best return on investment


Submersible pumps single phase
FS 400 / 750 / 1500 (S)

AFEC contractor pumps are designed for continous operation.

• Stainless steel outercasing - cooling for continous operation.
• Dynamically balanced chrome-steel impellers, high wear resistant.
• Double mechanical seal in oilbath.
• Lubricated for life, maintenance free bearings.
• Motor class F – IP 68 execution with thermal overload protection.
• Easy in maintenance and service.
• Pumps also available in 110 V – 60 Hz.
• FS 1500 also available in 3 phase – 400 V.

Technical specification

Shaft stainless steel 1.4006

Outercase stainless steel 1.4301
Suctionplate stainless steel 1.4301
Impeller chrome steel
Cable 10 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless 1.4301
Motor execution IP 68 – Class F
Max. motor temperature 40°C (104° F)
Voltage 1 phase – 230 V – 50 Hz
2850 RPM

Head Capacity Dimensions

Free
Discharge Motor Voltage Weight
(max.) (max.) passage Highth Diameter
Type
inch kW V mwk m3/h mm kg mm mm

FS-400* 2” 0,40 230 11 14 6 12 332 184

FS-750* 2” 0,75 230 15 18 8 15 359 184
FS-1500(S)** 2” 1,50 400 20 26 9 26 434 225

*) also with floatswitch **) 400 Volt execution delivered with 20 m. H07-RNF cable. (S) = single phase 230 Volt.

AFEC pumps – best return on investment


 Construction dewatering pumps
FS 215 (S) / 315 (S)

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel/cast iron.
• Dynamically balanced high chrome steel impeller.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by shaft sleeve.
• Discharge, volute and impeller are easily changed for different performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF (400 Volt)
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 1 phase 230 V - 50 Hz - 2850 RPM
3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS-215 (S) 2” 1,5 400 22 24 9 35 573 234

FS-315 (S) 3” 1,5 400 16 39 9 35 573 234

S = single phase 230 V.

AFEC pumps – best return on investment


Construction dewatering pumps
FS 222 / 322

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel/cast iron.
• Dynamically balanced high chrome steel impeller.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by
shaft sleeve.
• Discharge, volute and impeller are easily
changed for different performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS - 222 2” 2,2 400 27 24 9 41 608 234

FS - 322 3” 2,2 400 20 45 9 41 608 234

AFEC pumps – best return on investment


 Construction dewatering pumps
FS 237 / 337 / 437

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel/cast iron.
• Dynamically balanced high chrome steel impeller.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by sleeve against direct wear.
• Discharge, volute and impeller are easily
changed for different performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS - 237 2” 3,7 400 35 30 11 58 642 285

FS - 337 3” 3,7 400 30 54 11 58 642 285
FS - 437 4” 3,7 400 18 90 11 58 642 285

AFEC pumps – best return on investment


Construction dewatering pumps
FS 355 / 455

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel/cast iron.
• Dynamically balanced high chrome steel impeller.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by sleeve against
direct wear.
• Discharge, volute and impeller are easily changed for different
performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS - 355 3” 5,5 400 32 72 11 64 660 285

FS - 455 4” 5,5 400 22 102 11 64 660 285

AFEC pumps – best return on investment


 Construction dewatering pumps
FS 475 / 675

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel cast/iron.
• Dynamically balanced high chrome steel impeller.
• Ball bearings lubricated for life and free maintenance.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by sleeve against direct wear.
• Discharge, volute and impeller are easily changed for different
performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS - 475 4” 7,5 400 40 90 15 123 770 344

FS - 675 6” 7,5 400 28 130 15 123 770 344

AFEC pumps – best return on investment

10
Construction dewatering pumps
FS 4110 / 6110

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed for continuous operation.

• Pumpcasing double design stainless steel/cast iron.
• Dynamically balanced high chrome steel impeller.
• Ball bearings lubricated for life and free maintenance.
• Double mechanical seal in oilbath.
• Fine castings discharge and topcover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by sleeve against direct wear.
• Discharge, volute and impeller are easily changed for different
performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS - 4110 4” 11 400 50 90 15 134 770 344

FS - 6110 6” 11 400 30 150 15 134 770 344

AFEC pumps – best return on investment

11
 Construction dewatering pumps
FS 4220 / 6220 / 8220

Compact design, high performance and exceptional durability for

handling abrasive liquid, widely used in general construction and
civil engineering.

AFEC pumps designed continuous operation.

• Pumpcasting double design stainless steel/cast iron.

• Dynamically balanced high chrome steel impeller.
• Ball bearings lubricated for life and free maintenance.
• Fine casting discharge and top cover.
• Standard with 20 meter cable H07RNF.
• Stainless steel motor shaft protected by sleeve against direct wear.
• Discharge, volute and impeller are easily changeable for different
performances.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller chrome steel
Cable 20 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FS 4220 4” 22 400 70 120 15 249 1043 420

FS 6220 6” 22 400 50 192 15 250 1043 420
FS 8220 8” 22 400 31 360 15 251 1043 420

AFEC pumps – best return on investment

12
Construction dewatering pumps
KO 204 / 208 / 215 (S) / 315 (S)

Compact design and high durability for various

dewatering applications and construction.

• Side discharge.
• Special heat treated 410 stainless steel motorshaft.
• Durable cast iron outercase to achieve superior heat
transfer.
• Double mechanical seal in oilbath.
• Balanced impeller.
• 20 meter cable H07RNF.

Technical specification

Shaft stainless steel 1.4006

Pumpcasing cast iron
Impeller cast iron
Cable 230 V - 10 meter H07RNF
400 V - 20 meter H07RNF
Packing NBR
Mechanical seal primary SiC/SiC
secundary Co/CE
Nuts/bolts stainless steel 1.4301
Motor temperature 40° C (104° F)
Motor execution IP 68 class F
Voltage 1 phase 230 V - 50 Hz - 2850 RPM
3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

KO204* 2” 0,40 230 11 12 6 17 377 173

KO208* 2” 0,75 230 15 18 6 23 440 200
KO215 (S) 2” 1,5 400 20 24 6 36 440 200
KO315 (S) 3” 1,5 400 18 36 6 36 440 200

* Also with floatswitch. S = single phase 230 V with 10 meters of H07RNF cable

AFEC pumps – best return on investment

13
 Sewage pump
BV 204 / 208 / 315 (S)

Unique non-clog design for handling waste water

containing sewage, grass, sand and various solids.

Balanced impeller in semi-vortex design creates a vortex effect

to carry soft or fibrous particles without clogging. Free passage
25-45 mm type related.

• Pumps with motor protection and double mechanical seal in

oil-bath.
• 20 meter cable H07RNF.

Technical specification

Motorhouse cast iron

Pumpcasing cast iron
Impeller cast iron
Motorshaft stainless steel
Bolts/nuts stainless steel
O-rings NBR rubber
Mechanical seal primary SiC/SiC
secundary Co/Ce
Motor execution IP 68 Class F
Voltage 1 phase 230 V - 50 Hz - 2850 RPM
3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

BV204* 2” 0,40 230 8 14 25 18 385 162

BV208* 2” 0,75 230 12 18 25 22 462 162
BV315 (S) 3” 1,5 400 15 33 45 27 487 170
* Also with floatswitch. S = single phase 230 V with 10 meters of H07RNF cable

AFEC pumps – best return on investment

14
Sewage pump
BV 322 / 337 / 455

Unique non-clog design for handling waste water

containing sewage, grass, sand and various solids.

Well-balanced impeller in semi-vortex design creates a vortex

effect to carry soft or fibrous particles without clogging. Parts
passage 50-55 mm type related.

• Excellent price/quality ratio.

• Pumps with motor protection and double mechanical seal in
oil-bath.
• Standard with 20 meter cable H07RNF.

Technical specifications

Motorhouse cast iron

Pumpcasting cast iron
Impeller cast iron
Motorshaft stainless steel
Bolts / Nuts stainless steel
O-ring and volute NBR rubber
Mechanical seal primary SiC/SiC
secundary Co/Ce
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 3 phase 400 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

BV 322 3” 2,2 400 17 50 50 38 583 340

BV 337 3” 3,7 400 22 60 50 47 640 365
BV 455 4” 5,5 400 27 90 55 66 725 395

AFEC pumps – best return on investment

15
 Submersible residue dewatering pump
FSR 400

• Stainless steel outer case.

• Cutting-edge designed double casing to achieve a superior cooling effect.
• Double mechanical seal in oil bath.
• PU-impeller.
• 10 meters cable H07-RNF.
• also available in 110 Volt - 60 Hz

Applications rental markets

• Removing residue water
• Drainage of flat surfaces on rooftops, parking lots, pools, basements, etc.

Technical specifications

Shaft stainless steel 1.4006

Outercasing stainless steel 1.4301
Suction plate stainless steel 1.4301
Impeller PU-polyurethaan
Cable 10 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute NBR rubber
Bolts/nuts stainless steel 1.4301
Motor temperature 40°C (104°F)
Motor execution IP 68 class F
Voltage 1 phase 230 V - 50 Hz - 2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FSR-400 1” 0,40 230 11 8 2 15,5 332 208

FSR-400 2” 0,40 230 11 14 2 15,5 332 208

AFEC pumps – best return on investment

16
Stainless steel submersible pumps
FSS 250 / 400 / 750

Versatile and functional state of art design,made to

withstand even most severe environments.

• Integrated stainless steel outercasing and strainer

• Constructed entirely in stainless steel.
• Highly wear resistance heat treated stainless steel shaft.
• Double mechanical seal in oil bath.
• All surface materials and oil are non-toxic.
• Max. liquid temperature: 104°F (40°C).

Application:
• Corrosion resistance for sea water transfer.
• Chemical polluted water or drainage
of sump containing chemicals.

Technical specification

Shaft stainless steel 1.4006

Outer casing stainless steel 1.4301
Bolts/nuts stainless steel 1.4301
Impeller stainless steel 1.4301
Motorhousing stainless steel 1.4301
Mechanical seal primary SiC / SiC
secundary Co/Ce
Volute liner Non toxic latex rubber
Motor temperature 40° C (104° F)
Motor execution IP 68 class F
Voltage 1 phase - 50 Hz - 2850 RPM
Motor IP 68, isolation, class F

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FSS 250* 1,5” 0,25 230 8 12 6 12 332 184

FSS 400* 2” 0,40 230 11 14 6 12 332 184
FSS 750* 2” 0,75 230 15 18 8 15 359 184

* Also with floatswitch

AFEC pumps – best return on investment

17
 Submersible contractorpump
FLS 400

AFEC light weight contractor pump.

• Aluminium outercase, cooling for continous operation.

• Polyurethaan impeller.
• Double mechanical seal in oilbath.
• Lubricated for life, maintenance free bearings.
• Motor class F IP 68 execution with thermal overload
protection.
• 10 meters Ho7RNF cable and top discharge.
• Easy in maintenance and service.
• Available 110 Volt - 60 Hz

Technical specification

Shaft Stainless steel 1,4006

Outercase Aluminium
Suction plate Cast iron
Impeller Polyurethaan
Cable 10 meter H07RNF
Mechanical seal primary SiC/SiC
secundary Co/Ce
O-ring and volute liner NBR rubber
Bolts / nuts Stainless steel 1.4301
Max. motor temperature 40° C (104° F)
Voltage 1 phase - 230 V - 50 Hz
2850 RPM

Head Capacity Free Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) passage Highth Diameter

inch kW V mwk m3/h mm kg mm mm

FLS 400* 2” 0,40 230 11 14 6 11 308 243

* Also with floatswitch

AFEC pumps – best return on investment

18
Small version submersible pump
LB 15

Lightweight model, special design for easy pumping.

Model LB 15 is very simple to clean, by removable filter, suitable to

pump out swimming pools, ponds, basements and also for
emptying roofs. Easy to handle 4 kg.

• Colour-coated aluminium alloy motor casing for superior heat

transfer.
• Stainless steel heat treated shaft.
• Permanently oil-lubricated triple lip seals for exceptional durability.
• Durable glass reinforced thermoplastic impeller.
• Standard 10 meters cable H07RNF.
• Oil-free motor with built-in thermal protector.

Technical specifications

Shaft stainless steel 1.4006

Impeller reinforced thermoplastic
Pumpcasing colour coated aluminium alloy
Mechanical seal triple lip seals
Max. temperature 40°C (104°F)
Max. submerged depth 2 meters
Motor 1 phase 230 V - 50 Hz - 2850 RPM

Head Capacity Dimensions

Discharge Motor Voltage Weight
Type (max.) (max.) Highth Diameter

inch kW V mwk m3/h kg mm mm

LB15 1” 0,15 230 7 8 4 120 150

LB15A 1” 0,15 230 7 8 4,3 120 150

AFEC pumps – best return on investment

19
 AFEC contractor Pumps, the most popular
submersible pumps on site.

Distributor:

AFEC Pumps Europe BV

Edisonstraat 12-a
P.O. Box 384
7000 AJ Doetinchem (NL)
Tel. +31(0)314 625 125
Fax +31(0)314 625 306
info@afeceurope.com

www.afeceurope.com
20