TELEWAVE, INC.

CATALOG 31
About Telewave

Telewave, Inc. designs and manufactures rugged, high-quality wireless system equipment for domestic
and international markets. We support conventional and trunked radio systems, as well as Cellular, SMR,
PCS, Trunking, Paging, and Broadcast services. Our customers include public safety providers, local
and state governments, federal agencies, wireless system operators, and businesses,

Since 1972, Telewave has focused on the needs of our customers, providing the best American-made
wireless system products, with the fastest on-time delivery record in the industry. As pioneers of low-
loss combining, Telewave’s early reputation as a premier problem solver was made by reorganizing and
“cleaning up” some of the most crowded and complex radio transmitter sites in the San Francisco Bay
Area. Where off-the-shelf products for interference control often did not exist, Telewave built custom
high performance equipment to meet customer requirements. These innovative designs became the
foundation of our early product line.

Many equipment manufacturers will not accommodate custom orders or special requirements. Telewave
has the engineering expertise and manufacturing flexibility that allows us to quickly modify existing
equipment, or design a completely new product line to meet any performance goal. Initial evaluation
and consultation have always been provided to customers at no charge.

Telewave products are supported by a full network of US and international sales engineers, representatives,
and distributors. Telewave is certified to meet the requirements of ISO 9001:2008, and our commitment
to high quality and excellent customer service continues to guide our efforts.

Telewave Sales and Distribution

1-800-331-3396
660 Giguere Court • San Jose, CA 95133
(408) 929-4400 • (408) 929-4080 fax
www.telewave.com • sales@telewave.com

Distributors - USA and Canada

Talley Communications Tessco Technologies, Inc. Hutton Communications
Santa Fe Springs, CA 90670 Hunt Valley, MD 21031 Dallas, TX 75284
1-800-949-7079 1-800-508-5444 1-877-648-8866 (US)
(562) 906-8000 (410) 229-1200 1-877-762-8274 fax
(562) 906-8080 fax (410) 527-0005 fax 1-800-265-8685 (Canada)
www.talleycom.com www.tessco.com www.huttoncom.com
sales@talleycom.com sales@tessco.com sales@huttoncom.com

Please visit our website at www.telewave.com/sales.html

for a list of current US sales representatives.

TWDS-0008 Rev. 3/16

 CONTENTS
SECTION 1 TRANSMITTER COMBINING . . . . . . . . . . . . . . . . . . . . . 3

SECTION 2 RECEIVER MULTICOUPLERS . . . . . . . . . . . . . . . . . . . . 28

SECTION 3 POWER MONITORING . . . . . . . . . . . . . . . . . . . . . . . . 64

SECTION 4 ISOLATORS AND LOADS . . . . . . . . . . . . . . . . . . . . . . . 75

SECTION 5 CAVITIES & FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

SECTION 6 DUPLEXERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

SECTION 7 ANTENNAS

COLLINEAR . . . . . . . . . . . . . . . . . . . . . . . . . 196

DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

YAGI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

WIDEBAND . . . . . . . . . . . . . . . . . . . . . . . . . 294

POWER DIVIDERS, COUPLERS . . . . . . . . . . 302

SECTION 8 TECHNICAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . 306

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
1 TRANSMITTER COMBINERS
1 TRANSMITTER COMBINERS

Cavity-Ferrite Low Loss

Low-loss combiners use one or more tuned cavities and
a dual-junction isolator for each channel to maximize
isolation between transmitters, with the lowest possible
insertion loss.

Ceramic
Ceramic enhanced cavities have the same or greater
performance as full size cavities, but in a smaller package.
This greatly reduces the volume and rack space of
combiners which use these cavities.

Hybrid
Hybrid combiners make use of a hybrid coupler and
dual isolator for each transmitter. The coupler allows
frequencies to be combined with no minimum spacing, but
will have higher insertion loss.

Pass-Notch
A pass-notch combiner uses a combination of pass and
notch cavities arranged so that each transmitter sees a low
impedance path to the antenna, but is isolated from all
other transmitters.
 30 - 88 MHz

LOWBAND COMBINERS

Telewave Lowband and Midband

Combiners offer high performance
with industry-standard Telewave
reliability.
Telewave is one of the few remaining
manufacturers of full size, high-”Q”
cavity filters between 30 and 88
MHz. These filters can be deployed
in a number of configurations for
low band combining and receiver
filtering.
The M101-030-5T8R series uses 16
cavities to combine 5 transmitters
i n t h e 37 M H z b a n d a n d 8
receivers between 47-49 MHz,
with transmitter spacing of only
100 KHz.
Telewave has also designed a unique
system to combine 2 transmitters in
the 45 MHz band with 100 KHz
separation, which employs custom
designed Telewave hybrid couplers
and a dual-cavity sideband filter.
Lowband systems present a number
of operational challenges, but
Telewave has the tools to custom
design a complete filtering system
for any requirement.

M101-030-5T8R

All specifications subject

6 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1010 Rev. 8/09
 148 - 170 MHz

M104-150-4TPC
4 CHANNEL LOW LOSS COMBINER
1
The M104-150-4TPC Low Loss

TRANSMITTER COMBINERS
VHF Combiner offers the same
high performance as our standard
low loss combiners, in a much
smaller package. State of the art
technology allows us to create one
of the world's small est low loss
combiners.
The M104-150-4TPC combines up
to 4 channels per unit, with 300
KHz separation, in only 8.75" of
standard rack space. The modular
combining units can be grouped for
up to 16 channels to accommodate
system expansion.
The optional receiver system
utilizes the Telewave TPMC-1543
multicoupler for enhanced receiver
performance, and distribution to 4
receivers.

SPECIFICATIONS
Frequency range 148-170 MHz
Channels 1-4 channels into 1 antenna
Channel separation (min) 300 KHz
Input power (max) 100 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.4 dB - 4 ch. at 300 KHz spacing
TX-to-TX isolation (typ.) 75 dB
Antenna to TX isolation (typ.) 70 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 4” square / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. / cm 8.75 x 19 x 12.5 (21.6 x 48.3 x 31.75)
Weight lb. (kg) 32 (14.5)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 7
TWDS-1023 Rev. 2/11
 148 - 174 MHz

M108-150-TRM SERIES
LOW LOSS VHF COMBINER

The M108-150-TRM series uses

up to ten 8”, high “Q” low-loss
cavities mounted on a standard
19” x 72” rack. These combiners are
available in a vertical or horizontal
configuration, depending on site
requirements.
Up to 8 cavities can be mounted
vertically in two groups, or up
to 10 cavities can be mounted
horizontally on two 5-channel
panels. The vertical configuration
is useful for installation in limited
space or direct wall mounting. Each
cavity also contains internal support
for the tuner assembly specifically
to enable horizontal mounting.
Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.
An optional receiver system can be
M108-150-5TRM
built around the Telewave compact with preselector, power M108-150-8TRM
vertical mounting
preselector series, or full-size monitoring, and RX panel
cavities as needed. Depending on
SPECIFICATIONS
the application, the TPCP-1544C
or TPCP-1556 preselector may Frequency range 148-174 MHz
be mounted in the upper portion Channels 1-10 channels into 1 or 2 antennas
of a 72” or 84” rack, along with Channel separation (min) 125 KHz
a 1RU receiver panel for up to 16 Input power (std. / opt.) 100 / 150 watts per channel
channels.
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
With new narrowband channel Insertion loss per ch. (typ.) 3.25 dB - 5 ch. at 250 KHz spacing
assignments, proper filtering is 4.0 dB - 5 ch. at 150 KHz spacing
even more critical. The M108-150-
TX-to-TX isolation (typ.) 75 dB
TRM series allows operators of
high-density VHF systems to take Antenna to TX isolation (typ.) 70 dB
advantage of new technology, 2nd harmonic suppression (typ.) 90 dB
and enhance the performance of Cavity size 8” diameter / 1/4 wave
existing systems. Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. / cm 24.5 x 19 x 26 / 62 x 48.3 x 66
Weight lb. (kg) 150 (68.1) 5 ch.

All specifications subject

8 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1029 Rev. 10/12
 148 - 174 MHz

M101-150-8TRM19
LOW LOSS VHF COMBINER FOR CLOSE SPACING
1
The M101-150-8TRM19 uses up to With new narrowband channel

TRANSMITTER COMBINERS
eight 10”, high “Q” low-loss cavities assignments, proper filtering is
mounted on a standard 19” x 72” even more critical. The M101-150-
rack. This combiner provides as TRM19 series allows operators of
much as 75 dB isolation for each high-density VHF systems to take
transmitter, with spacing as close advantage of new technology,
as 105 KHz. Each channel has a and enhance the performance of
separate isolator with 60 Watt existing systems.
load (standard), and all tuning is
accessible from the front panel.
Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.
The optional receiver system is
built around the Telewave compact
preselector series. Depending on
the application, the TPCP-1544C
or 1546C preselector may be
integrated directly into the upper
portion of the M101-150 84” rack.
The 1RU receiver panel also mounts
straight into the rack, preserving
valuable site floor space.

SPECIFICATIONS
Frequency range 148-174 MHz
Channels 1-8 channels into 1 or 2 antennas OPTIONAL 100 WATT
LOADS SHOWN
Channel separation (min) 105 KHz
Input power (std. / opt.) 100 / 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.0 dB - 5 ch. at 250 KHz spacing
3.8 dB - 5 ch. at 150 KHz spacing
TX-to-TX isolation (typ.) 75 dB
Antenna to TX isolation (typ.) 70 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 10” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Rack dimensions (HWD) in. (cm) 84 x 20 x 26 (214 x 51 x 66)
Weight lb. (kg) 250 (113.5)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 9
TWDS-1011 Rev. 10/12
 148 - 174 MHz

M101-150-8TRM
LOW LOSS VHF COMBINER

The Telewave M101-150 Low Loss and enhance the performance of

VHF Combiner is a unique, fully existing systems.
self-contained transmitter and
receiver combining system. The
custom welded 24” steel frame FEATURES
provides a rugged enclosure • ALL TUNING FROM FRONT
for all system components. This
• 8 TRANSMITTERS INTO
integrated design allows channels
ONE ANTENNA
to be added, retuned, or removed
in the field at any time, without • INTEGRATED RCVR PANEL
disrupting other active channels. • SELF-CONTAINED, BUILDING
The 24” x 48” rack handles up to 8 BLOCK CONCEPT
channels and 1 or 2 antennas. • LESS THAN 3 dB INSERTION
With new narrowband channel LOSS WITH PROPER
assignments, proper filtering is FREQUENCY SELECTION
even more critical. 10-inch High- • ALL CONNECTIONS AT
”Q” cavities with dual isolators TOP OF RACK
provide 75 dB isolation between • 75 dB TX TO TX PROTECTION
channels, and the optional receiver
• 130 dB RX INTERMOD
panel drives multiple receivers from
PROTECTION WITH RX PNL.
a single antenna. The PM8C2S
wattmeter panel allows forward • RF POWER MONITORING
or reverse power monitoring for FOR ALL CHANNELS AND
each channel, or total power to ANTENNA
each antenna. The M101-150 series • REMOTE TX KEYING
allows system operators to take • FIELD TUNABLE
advantage of new technology,
SPECIFICATIONS
Frequency range 148-174 MHz
Channels 1-8 channels into 1 or 2 antennas
Channel separation (min) 105 KHz
Input power (std. / opt.) 100 / 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.0 dB - 5 ch. at 250 KHz spacing
3.8 dB - 5 ch. at 150 KHz spacing
TX-to-TX isolation (typ.) 75 dB
Antenna to TX isolation (typ.) 70 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 10” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 24” rack mount / N Female
Rack dimensions (HWD) in. (cm) 48 x 24 x 31 (122 x 61 x 79)
Weight lb. (kg) 250 (113.5)

All specifications subject

10 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1014 Rev. 10/12
 400 - 512 MHz

M106-450-4/8TPC
COMPACT TRANSMITTER COMBINER PANELS
1
The Telewave M106-450-4TPC

TRANSMITTER COMBINERS
FEATURES
and 8TPC Compact Low Loss
• ULTRA COMPACT -
Combiner Panels are designed for
4 CH. ONLY 12.25" HIGH
new, narrowband technologies. Six-
inch diameter high “Q” cavities and • 1-8 TRANSMITTERS INTO ONE
ANTENNA
horizontal mounting dual isolators
provide high performance in only • LESS THAN 3 dB
7RU (12.25”). INSERTION LOSS (4 CH.)
• MODULAR PANELS
All components in these field-
SIMPLIFY EXPANSION
expandable combiners are
completely passive. This design • COMPLETELY SELF-
CONTAINED
allows for front panel tuning,
simplifing installation and • LOW COST PER CHANNEL
maintenance, and allows for • FULLY FIELD TUNABLE
addition of channels without any • 80 dB TX TO TX PROTECTION
disruption of service.
These combiners are shipped
without racks, for mounting in
existing installations.

MAJOR OPTIONS
• HEAVY DUTY 19” RACKS
• POWER MONITORING
• WATTMETER PANEL
• RECEIVER MULTICOUPLER
SPECIFICATIONS • EXPANSION KITS TO 8
Frequency range 400-512 MHz CHANNELS (M106-450-1T)
Channels 1-8 channels into 1 or 2 antennas
Channel separation (min) 300 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 2.9 dB - 4 ch. at 300 KHz spacing
3.4 dB - 8 ch. at 300 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 6” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 12.25 x 19 x 17 (31.1 x 48.3 x 43.2)
Weight lb. (kg) 4 ch. 60 (27.2)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 11
TWDS-1031 Rev. 7/09
 200 - 512 MHz
M107-250-TP 200-300 MHz
M107-350-TP 300-400 MHz
M107-250, 350, 450 TP SERIES M107-450-TP 400-512 MHz

LOW LOSS TRANSMITTER COMBINER PANELS

Telewave M107-250, -350, and FEATURES

-450 Low Loss Combiner panels
• ALL TUNING FROM
are designed for new, narrowband
THE FRONT
technologies.
• 4 OR 6 CHANNELS PER PANEL
All components in these field- INTO ONE ANTENNA
expandable combiners are • LESS THAN 3 dB INSERTION
completely passive. This design LOSS
allows front panel tuning, simplifies
• MODULAR PANELS SIMPLIFY
installation and maintenance, and
EXPANSION
allows for addition of channels
without any disruption of service. • LOW COST PER CHANNEL
• FULLY FIELD TUNABLE
Each panel fits a standard 19” rack,
and allows up to 4 or 6 channels. • 80 dB TX TO TX PROTECTION
Additional channels can be added
to a panel without disrupting M107 TP
4 CHANNELS
existing users.
These combiners are shipped
without racks, for mounting in
existing installations. The actual
height and depth of each panel can
v a r y w i t h f re q u e n c y. L owe r
frequencies require longer
cavities.

SPECIFICATIONS
Frequency ranges 200-512 MHz
Channels 4 or 6 channels into one antenna
Channel separation (min) 250 KHz
Input power (std. / opt.) 100 / 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.25 dB at 275 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB M107 TP
2nd harmonic suppression (typ.) 90 dB 6 CHANNELS

Cavity size 7” diameter / 1/4 wave

Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dim. typ. (HWD) in. (cm) 4 ch. 17.5 x 19 x 26 (44.5 x 48.3 x 66)
(Panel height varies with freq.) 6 ch. 24.5 x 19 x 26 (62.2 x 48.3 x 66)
Weight lb. (kg) 4 ch. 42 (19.1) / 6 ch. 58 (26.3)

All specifications subject

12 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1007 Rev. 6/11
 200 - 512 MHz
M107-250-8TRM 200-300 MHz

M107-250, 350, 450 TRM SERIES

EXPANDABLE LOW LOSS TRANSMITTER COMBINERS
M107-350-8TRM 300-400 MHz
M107-450-8TRM 400-512 MHz 1
Telewave M107-250, -350, and To meet international requirements,

TRANSMITTER COMBINERS
-450 Low Loss Combiners are special configurations and expan-
designed for new, narrowband sion kits are available.
technologies. All components in
these field-expandable combiners
are completely passive, with the
exception of the optional receiver FEATURES
distribution amplifier. The compact • ALL TUNING FROM
layout is enclosed in a rugged steel THE FRONT
frame. • UP TO 14 TRANSMITTERS
INTO ONE ANTENNA
Optional power monitoring for
each channel is available, as well as • LESS THAN 3 dB
remote keying for each transmitter. INSERTION LOSS
The PM10C2S-1C wattmeter panel • ALL CONNECTIONS AT
uses only 1.75” of rack space. TOP OF RACK

An optional receiver system can • COMPLETELY SELF

CONTAINED
be built around the Telewave
compact preselector series, or full- • LOW COST PER CHANNEL
size cavities as needed. Depending • FULLY FIELD TUNABLE
on the application, a 4 or 6 cavity • 80 dB TX TO TX PROTECTION
compac t preselec tor may be
mounted in the upper portion of a
72” or 84” rack, and a 1RU receiver
panel with 8 or 16 channels.

SPECIFICATIONS
Frequency ranges 200-512 MHz
Channels 1-14 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (std. / opt.) 100 / 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.25 dB at 275 KHz spacing
TX-to-TX isolation (typ.) 80 dB Shown with Optional Receiver
Distribution Panel
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 7” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
72 x 20 x 26 (183 x 51 x 66)
Rack dimensions (HWD) in. (cm) (Depth varies with frequency)
Weight lb. (kg) 200 (91)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 13
TWDS-1001 Rev. 11/12
 400 - 512 MHz

M108-450-TRM SERIES
LOW LOSS UHF COMBINER

The M108-450-TRM series uses up

to ten 8”, high “Q” low-loss cavities
mounted on a standard 19” x 72”
rack. Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.
An optional receiver system can
be built around a Telewave UHF
preselector. Depending on the
application, the TPCP-4544 or
TPCP-4546 preselector may be
mounted in the upper portion of a
72” or 84” rack, and a 1RU receiver
panel with 8 or 16 channels.
With new narrowband channel
assignments, proper filtering is M108-450-5TRM
even more critical. The M108- with preselector, power
monitoring, and RX panel
450-TRM series allows operators
of high-density UHF systems to
take advantage of new technology,
and enhance the performance of
existing systems.

SPECIFICATIONS
Frequency range 400-512 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.5 dB - 5 ch. at 250 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 8” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 24.5 x 19 x 14 (62 x 48.3 x 35.6)
Weight lb. (kg) 150 (68.1) 5 ch.

All specifications subject

14 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1036 Rev. 10/12
 400 - 512 MHz

M108-450-TRM3Q SERIES
LOW LOSS UHF COMBINER
1
The M108- 450 -TRM3Q series

TRANSMITTER COMBINERS
uses up to ten 8-inch, high “Q”
¾-wave low-loss cavities mounted
on a standard 19” x 72” rack.
These combiners are available in a
vertical or horizontal configuration
as required.
Up to 8 cavities can be mounted
vertically in two groups, or up
to 10 cavities can be mounted
horizontally on two 5-channel
panels. The vertical configuration
is useful for installation in limited
space or direct wall mounting. Each
cavity also contains internal support
for the tuner assembly specifically
to enable horizontal mounting.
Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.
An optional receiver system can
be built around the Telewave
M108-450-5TRM3Q
compact preselector series, or full- with preselector, power M108-450-8TRM3Q
size cavities as needed. Depending monitoring, and RX panel vertical mounting
on the application, the TPCP-4544
or TPCP-4546 preselector may be SPECIFICATIONS
mounted in the upper portion of a Frequency ranges 400-512 MHz
72” or 84” rack, and a 1RU receiver Channels 1-10 channels into 1 or 2 antennas
panel with 8 or 16 channels. Channel separation (min) 175 KHz
With new narrowband channel Input power (max) 150 watts per channel
assignments, proper filtering is Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
even more critical. The M108-450- Insertion loss per ch. (typ.) 3.6 dB - 5 ch. at 200 KHz spacing
TRM3Q series allows operators
TX-to-TX isolation (typ.) 80 dB
of high-density UHF systems to
take advantage of new technology, Antenna to TX isolation (typ.) 75 dB
and enhance the performance of 2nd harmonic suppression (typ.) 90 dB
existing systems. Cavity size 8” diameter / 3/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 24.5 x 19 x 26 (62 x 48.3 x 66)
Weight lb. (kg) 150 (68.1) 5 ch.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 15
TWDS-1037 Rev. 10/12
 400 - 512 MHz

M101-450-8TRM-193Q
LOW LOSS UHF COMBINER FOR CLOSE SPACING

The M101-450-8TRM-193Q is a high portion of the M101-450 84” rack.

power, high capacity UHF combining A 1RU receiver panel with 8 or 16
system. The system combines up to channels also mounts straight into
eight transmitters using 10-inch, the rack, preserving valuable site
high “Q”, ¾-wave low-loss cavities floor space.
mounted on a standard 19” x 72”
With new narrowband channel
rack. This design provides as much
assignments, proper filtering is
a s 75 dB i s olation for eac h
even more critical. The M101-450-
transmitter, with spacing as close as
TRM193Q series allows operators
175 KHz. Each channel has a
of high-density UHF systems to
separate dual isolator, and all tuning
take advantage of new technology,
is accessible from the front panel.
and enhance the performance of
Optional power monitoring for existing systems.
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C metering panel
uses only 1.75” of vertical rack
space.
The optional receiver system
is built around Telewave UHF
preselec tor s. Depending on
the application, the TPCP-4544,
4546, or 4548 preselector may be
integrated directly into the upper

OPTIONAL 100 WATT

SPECIFICATIONS LOADS SHOWN
Frequency range 400-512 MHz
Channels 1-8 channels into 1 or 2 antennas
Channel separation (min) 175 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 3.25 dB - 5 ch. at 250 KHz spacing
3.75 dB - 5 ch. at 200 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 10” diameter / 3/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Rack dimensions (HWD) in. (cm) 84 x 20 x 26 (214 x 51 x 66)
Weight lb. (kg) 250 (113.5)

All specifications subject

16 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1020 Rev. 10/12
 400 - 512 MHz

M101-450-8TRM
LOW LOSS UHF COMBINER
1
The Telewave M101-450 Low Loss and enhance the performance of

TRANSMITTER COMBINERS
UHF Combiner is a unique, fully existing systems.
self-contained transmitter and
receiver combining system. The
custom welded 24” steel frame FEATURES
provides a rugged enclosure • ALL TUNING FROM FRONT
for all system components. This
• 8 TRANSMITTERS INTO
integrated design allows channels
ONE ANTENNA
to be added, retuned, or removed
in the field at any time, without • INTEGRATED RCVR PANEL
disrupting other active channels. • SELF-CONTAINED, BUILDING
The 24” x 48” rack handles up to 8 BLOCK CONCEPT
channels and 1 or 2 antennas. • LESS THAN 3 dB INSERTION
With new narrowband channel LOSS WITH PROPER
assignments, proper filtering is FREQUENCY SELECTION
even more critical. 10-inch High- • ALL CONNECTIONS AT
”Q” cavities with dual isolators TOP OF RACK
provide 80 dB isolation between • 80 dB TX TO TX PROTECTION
channels, and the optional receiver
• 130 dB RX INTERMOD
panel drives multiple receivers from
PROTECTION WITH RX PNL.
a single antenna. The PM8C2S
wattmeter panel allows forward • RF POWER MONITORING
or reverse power monitoring for FOR ALL CHANNELS AND
each channel, or total power to ANTENNA M101-450-8TRM-8R
(with optional preselector
each antenna. The M101-450 series • REMOTE TX KEYING and receiver panel)
allows system operators to take • FIELD TUNABLE
advantage of new technology,

SPECIFICATIONS
Frequency range 400-512 MHz
Channels 1-8 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 2.8 dB at 275 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 10” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 24” rack mount / N Female
Dimensions (HWD) in. (cm) 48 x 24 x 24 (122 x 61 x 61)
Weight lb. (kg) 150 (68.1)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 17
TWDS-1016 Rev. 10/12
 746 - 806 MHz
800 - 869 MHz

M108-760-10TRM
LOW LOSS 700-800 MHz COMBINER

The Telewave M108-760-TRM An optional receiver system can

transmitter combiner covers be built around the Telewave
746-806 and 800-869 MHz. This compact preselector series, or full-
combiner features 8-inch, ¾-wave size cavities as needed. Depending
cavities for close channel spacing, on the application, the TPCP-7644
and allows 700 and 800 MHz preselector may be mounted in the
channels to be provisioned in the upper portion of a 72” or 84” rack,
same rack. and a 1RU receiver panel with 8 or
16 channels.
Each combiner covers a single
band, and is a modular unit on a Narrowband 700 MHz spectrum
24.5-inch panel. Each 19-inch rack provides Public Safety system
combines up 10 channels into a operators with new channels for
common antenna, with optional capacity expansion. The M108-
duplexer, preselector, and receiver 760-TRM series allows operators to
distribution. Individual channels flexibly deploy spectrum resources
are field-replaceable within the in 700 and 800 MHz bands, at new
applicable band without causing or existing sites.
downtime to other channels.
Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.

SPECIFICATIONS
Frequency ranges 746-806, 800-869 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 4.25 dB - 5 ch. at 250 KHz spacing
4.8 dB - 10 ch. at 250 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 8” diameter / 3/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 24.5 x 19 x 16 (62 x 48.3 x 40.6)
Weight lb. (kg) 150 (68.1)

All specifications subject

18 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1034 Rev. 10/12
 851 - 869 MHz

M106-860-5TP/10TP
COMPACT EXPANDABLE TRUNKING COMBINER PANELS
1
The Telewave M106-860 Compact The advanced mechanical design

TRANSMITTER COMBINERS
Trunking Combiner is an industry of Telewave high “Q” cavities
leader for excellence in low-loss assures maximum long-term system
combiner technology. performance.
The completely passive combining Heavy duty 19” racks, duplexers,
technique with front panel tuning and receiver multicoupler systems
access simplifies installation and are available as upgrades.
maintenance, and allows for the
addition of new channels without CLOSE-UP OF REAR PANEL (10 CH.)
any disruption of service.
Each combiner panel is field
expandable up to five channels.
Additional pre-tuned combiner
panels can be added at any time.
Valuable site space is conserved (Rack not included)
when using efficient Telewave
combiners.
The modular building - block
construction means no specialized
test equipment is required.

SPECIFICATIONS
Frequency range 851-869 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 500 KHz
Input power (max) 100 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 2.0 dB - 5 ch. at 1 MHz spacing
3.2 dB - 10 ch. at 500 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 65 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 6” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 12.25 x 19 x 17 (31 x 48.3 x 43.2)
Weight lb. (kg) 75 (34) 5 ch.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 19
TWDS-1003 Rev. 10/12
 851 - 869 MHz

M107-860-5TRM-HP, 10TRM-HP
COMPACT HIGH POWER TRUNKING COMBINER

The Telewave M107-860-5TRM-HP FEATURES

Low Loss High Power Combiner is
designed for trunking applications • FIELD TUNABLE
up to 175 watts per channel, with • 10 TRANSMITTERS INTO
up to 10 channels per rack. ONE ANTENNA

The combiner uses 7-inch, ¾ wave • POWER MONITORING

cavities, and channel expansion or FOR ALL CHANNELS AND
maintenance can be performed ANTENNA
without disruption of the system. • -50 dB RF OUTPUT POWER
RF power metering is switchable SAMPLER - EACH CHANNEL
for forward and reverse directions OPTIONS
for each transmitter and antenna.
Convenient remote transmitter • RECEIVER PANEL - 1RU
keying is included on the RF • 500 WATT DUPLEXER - 15 MHz
wattmeter panel. PASSBAND w/ 7-16 DIN
All high power trunking combiners • RG-393 PHASING HARNESS
are shipped in a 19” x 72” Rack, WITH 7-16 DIN CONNECTORS
with power monitoring, wattmeter FOR (2) 5-CHANNEL PANELS
panel with remote keying, 175 watt • HIGH POWER 5-WAY
isolator, and -50 dB sampler on 7-16 DIN JUNCTION
2nd stage isolator load port (75
watt load). Input connectors are N
Female and output is 7-16 DIN-F.
Standard cabling is high-temp RG-
393.

SPECIFICATIONS
Frequency range 851-869 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (max) 175 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 2.2 dB - 5 ch. at 1 MHz spacing
4.25 dB - 5 ch. at 250 KHz spacing
3.2 dB - 10 ch. at 500 KHz spacing
TX-to-TX isolation (typ.) 85 dB
Antenna to TX isolation (typ.) 80 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 7” diameter / 3/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female, 7-16 DIN
Panel dimensions (HWD) in. (cm) 17.5 x 19 x 17 (44.5 x 48 x 43)
Weight lb. (kg) 150 (68.1) 5 ch.

All specifications subject

20 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1002 Rev. 8/09
 806 - 869 MHz

M101-860-10TRM
LOW LOSS 800 MHz COMBINER
1
The Telewave M101-860 Trunking Convenient remote transmitter

TRANSMITTER COMBINERS
Combiner is an industry leader in keying is included on the RF
low-loss combiner technology. Ease wattmeter panel.
of installation and maintenance
All rack-mount f ive channel
is accomplished by front panel
combiners are field expandable
tuning.
to 10 channels by the addition
These trunking combiners are of pre-tuned combiner panels.
complete packages, including The modular building - block
19” x 72” rack or heavy duty steel construction means no specialized
cabinet with front and rear locking test equipment is required.
doors, receiver distribution system,
The advanced mechanical design
preselector, and power monitoring
of the Telewave 8-inch high “Q”
system.
cavities assures maximum long-
The completely passive combining term system performance. All
technique allows for maintenance cables are easily accessible from
and addition of channels without the front panel.
disruption of the system.
Valuable site space is conserved
when using efficient Telewave
designed combiners, and RF power
metering is a standard feature.
All forward and reverse power
measurements are switchable for
each transmitter and antenna.

SPECIFICATIONS
Frequency range 806-869 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 500 KHz (250 KHz with 3Q cavities)
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 2.0 dB - 5 ch. at 1 MHz spacing
3.2 dB - 10 ch. at 500 KHz spacing
TX-to-TX isolation (typ.) 85 dB
Antenna to TX isolation (typ.) 80 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 8” diameter / 1/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 24.5 x 19 x 16 (62 x 48.3 x 40.6)
Weight lb. (kg) 75 (34) 5 ch.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 21
TWDS-1017 Rev. 7/11
 851 - 869 MHz

TC860
CERAMIC ENHANCED TRUNKING COMBINER

The Telewave Ceramic Enhanced

860 MHz Trunking Combiner brings
ceramic technology to trunking
system operators. The TC860
combiner requires only 7 inches of
rack space, and the 4” ceramic
cavities provide the same
performance as conventional, eight-
inch ¾ -wavelength cavities. The
Telewave Ceramic Enhanced
combiner is the best choice when
site space is at a premium.
Ceramic Enhanced Resonators
allow combining of channels as
close as 250 KHz with reasonable
insertion loss. Fully temperature
compensated components ensure
frequency stability throughout the
entire temperature range. The
unique design also allows the cavity
to be tuned under the full 80 watts
of input power.
To fully complement this compact
combiner, the optional PM10C2S-
1C wattmeter panel requires only 1
rack unit of panel space. The SPECIFICATIONS
wat tmeter panel provides Frequency range 851-869 MHz
convenient transmitter keying and Channels 1-5 channels into 1 antenna
continuous monitoring of combiner
Channel separation (min) 250 KHz
per formance. If per- channel
Input power (max) 80 watts per channel
monitoring is required, additional
power monitors are t ypically Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
mounted on a separate 2RU Insertion loss per ch. (typ.) 2.2 dB - 5 ch. at 1 MHz spacing
panel. 2.8 dB - 5 ch. at 500 KHz spacing
The TC860 combiner is field 3.2 dB - 5 ch. at 250 KHz spacing
expandable to 10 channels with TX-to-TX isolation (typ.) 80 dB
pretuned expansion kits. This Antenna to TX isolation (typ.) 70 dB
building block concept allows the 2nd harmonic suppression (typ.) 90 dB
installation of new channels without
Cavity size 4” diameter ceramic / 1/4 wave
the need for specialized test
equipment. Operating temperature -0°C to +50°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 7 x 19 x 13 (17.8 x 48.3 x 33)
Weight lb. (kg) 36 (16.3) 5 ch.

All specifications subject

22 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1021 Rev. 10/12
 851 - 869 MHz

TW860-2HRB1, TW860-4HRB1
COMPACT HYBRID COMBINERS
1

TRANSMITTER COMBINERS
TW860-2HRB1 TW860-4HRB1

Te l e w a v e C o m p a c t H y b r i d These compact combiners provide filter on each channel removes any

Combiners allow transmit ter high performance in a very small spurious products.
combining with close frequency space. Both combiners occupy
The TW860-2HRB1 and -4HRB1
spacing that is not practical for only two rack units each (3.5”) of
operate as stand-alone devices, and
cavity-ferrite combiners. Combining vertical space on a 19” rack. Each
can be integrated into any standard
adjacent channels is possible, even combiner is a broadband device,
Telewave cavity/ferrite system to
two transmitters on the same and is pretuned for 800 MHz SMR/
provide maximum flexibility in
frequency. The TW860-2HRB1 and ESMR, Trunking, or NPSPAC.
frequency assignment. Contact our
4HRB1 will handle 2 or 4 channels
No additional tuning is required System Engineering Department
respec tively, with reasonable
during installation. A harmonic for custom integration, and high
insertion loss.
power applications.

BLOCK DIAGRAM
TW860-2HRB1 TWO CHANNEL HYBRID

T8660N ANTENNA
SPECIFICATIONS TLF-860 TWH-900
TX 1
Frequency range 851-869 MHz TWL-100
TWL-60
Channels 2 or 4 TZM-900
TX 2
Bandwidth 10-30 MHz
Input power (max) 100 watts per channel
Impedance / Input VSWR (max) 50 ohms / 1.3:1
Insertion loss: 2 ch. / 4 ch. 3.8 dB / 7.0 dB BLOCK DIAGRAM
TX to TX isolation 90 dB TW860-4HRB1 FOUR CHANNEL HYBRID

Antenna to TX isolation 65 dB T8660N

ANTENNA
TLF-860 TWH-900
2nd Harmonic attn. 65 dB TX 1
TWL-100
TWL-35
Temperature range -30° to +60°C
TZM-900

Mounting / Connectors 19” rack mount / N Female TX 2

Dimensions (HWD) in. (cm) 2 CH 3.5 x 19 x 11.25 (8.9 x 48.3 x 28.6)

4 CH 3.5 x 19 x 16.75 (8.9 x 48.3 x 42.5) TX 3

Weight Net / Ship lb (kg) 2 CH 15 (6.8) / 30 (13.6)

4 CH 20 (9.1) / 40 (18.2) TX 4

Enclosure Alodined Aluminum

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 23
TWDS-1015 Rev. 10/12
 896 - 941 MHz

M108-900-10TRM3Q
LOW LOSS 900 MHz COMBINER

The Telewave M108-900-TRM preselector may be mounted in the

transmitter combiner covers 896- upper portion of a 72” or 84” rack,
941 MHz. This combiner features and a 1RU receiver panel with 8 or
8-inch, ¾-wave cavities for close 16 channels.
channel spacing.
The M108-900 -TRM3Q series
Each combiner covers the full provides a new option for 900
band, and is a modular unit on a MHz system operators to deploy
24.5-inch panel. Each 19-inch rack systems with standard spacing and
combines up 10 channels into a normal insertion loss.
common antenna, with optional
duplexer, preselector, and receiver
distribution. Individual channels
are field-retunable without causing
downtime to other channels.
Optional power monitoring for
each channel is available, as well as
remote keying for each transmitter.
The PM10C2S-1C wattmeter panel
uses only 1.75” of rack space.
An optional receiver system can
be built around the Telewave
compact preselector series, or full-
size cavities as needed. Depending
on the application, the TPCP-8644

SPECIFICATIONS
Frequency range 896-941 MHz
Channels 1-10 channels into 1 or 2 antennas
Channel separation (min) 250 KHz
Input power (max) 150 watts per channel
Impedance / Input VSWR (typ.) 50 ohms / 1.25:1
Insertion loss per ch. (typ.) 4.25 dB - 5 ch. at 250 KHz spacing
4.8 dB - 10 ch. at 250 KHz spacing
TX-to-TX isolation (typ.) 80 dB
Antenna to TX isolation (typ.) 75 dB
2nd harmonic suppression (typ.) 90 dB
Cavity size 8” diameter / 3/4 wave
Operating temperature -30°C to +60°C
Mounting / Connectors 19” rack mount / N Female
Panel dimensions (HWD) in. (cm) 24.5 x 19 x 26 (62 x 48.3 x 66)
Weight lb. (kg) 150 (68.1) 5 ch.

All specifications subject

24 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1035 Rev. 7/09
 896 - 941 MHz

M101-900-10TRMH
HIGH CAPACITY 900 MHz HYBRID COMBINER
1
The Telewave 900 MHz Hybrid The M101-900 combiner systems

TRANSMITTER COMBINERS
Trunking Combiner is the industry are priced as a complete transmitter
leader for excellence in hybrid combining package, with a 19”
combiner technology. This design steel rack, receiver distribution
allows any transmitter frequency system with preselector, sideband
spacing, even transmitters on the filters as needed, and power
same frequency for hot standby. monitoring.
The passive combining design RF power metering is a standard
reduces maintenance requirements, feature. All forward and reverse
and allows simple reconfiguration power measurements are
of antennas to meet sys tem switchable for each transmitter. Up
coverage requirements. to five antennas can be monitored
for VSWR. Convenient remote
The rack mount ten- channel
transmitter keying is included on
combiners are field expandable
the wattmeter panel.
to twenty channels. Expansions
are accomplished by the addition The advanced design of the
of the pre-tuned duplexer cavity Telewave hybrid combiner assures
panels. Modular building block ma ximum long -term s ys tem
construction means no specialized performance. Special high power
test equipment is required. All combiners up to 250 watts are
components are easily accessible available upon request.
from the back of the rack.

M101-900-15TRM

TRANSMITTER COMBINER RECEIVER SYSTEM

Frequency range 896-941 MHz Frequency range 896-941 MHz
Channel separation (min) 12.5 KHz Port isolation (typ.) 25 dB
Input power (max) 150 watts per channel Power input 120 or 240 VAC
Temperature -30°C to +60°C +15 VDC
TX to TX isolation (typ.) 100 dB 3rd Order int. (typ.) +36 dB
Antenna to TX isolation (typ.) 80 dB Noise figure (typ.) 2.5 dB
Insertion loss (typ) 5 Antenna System (4 TX and 1 RX) System Gain (typ.) +4 to +6 dB
3.1 dB (2 channels to each TX or 2 channels duplexed to RX ant.) Temperature -40°C – +60°C
3 Antenna System (2 TX and 1 RX Ant) Connectors N Female
6.3 dB (4 channels to each TX) Channels 8-32
3.1 dB (2 channels duplexed to RX ant.) Mounting 19” Rack mount
2 Antenna System (1 TX and 1 RX) Test port -20 dB
9.3 dB (8 channels to TX ant.)
Note: Add 0.4 dB for each isolator, duplexer or sideband filter.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 25
TWDS-1018 Rev. 7/09
 66 - 512 MHz

BANDPASS/NOTCH COMBINERS
1 NOTCH, 1-3 PASS CAVITIES

Telewave Pass-Notch Combiners device to maintain proper energy

offer excellent performance, and flow in the combining network. The
several unique characteristics. pass cavities form a highly selective
Additional frequencies can be filter which effectively isolates each
added without retuning the entire node. The nodes are arranged in
system. Installation is simplified and ascending order, with the highest
off-air time is minimized. Splitting of frequency nearest the antenna.
transmitter and receiver systems is
Contact Telewave for complete
not necessary.
engineering assistance with your
Each combiner consist s of a system.
8” diameter notch cavity and
one to three 8” pass cavities. A
cavit y-mounted dual isolator
is recommended to suppress
intermodulation and third
harmonic s. The notch cavit y
performs the function of a steering

M101-150-1T-3PN
WITH OPTIONAL DUAL
ISOLATOR

SPECIFICATIONS
Frequency ranges M101-70-xx 66-88 MHz
M101-150-xx 136-174 MHz
M101-450-xx 400-512 MHz
Insertion loss 0.5 - 3.0 dB (adjustable)
Impedance 50 ohms
VSWR (max) 1.5:1
Input power (max) 350 watts at 1.7 dB insertion loss
(without isolators) 150 watts at 3.0 dB insertion loss
Cavity size 8” diameter
Temperature -30°C to +60°C
Size (HWD) in. M101-70-xx 53 x 19 x 8.5 / 17 (2PN, 3PN)
M101-150-xx 22 x 19 x 8.5 / 17 (2PN, 3PN)
M101-450-xx 16 x 19 x 8.5 / 17 (2PN, 3PN)
Weight lb. M101-70-1T -1PN 24
-2PN 35
-3PN 46
M101-150-1T -1PN 17
-2PN 25
-3PN 33
M101-450-1T -1PN 12
-2PN 17
-3PN 20

All specifications subject

26 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-1019 Rev. 6/12
 118 - 960 MHz

HYBRID COMBINERS
2 OR 4 CHANNELS
1
Telewave Hybrid Combiner s

TRANSMITTER COMBINERS
allow transmitter combining with
close frequency spacing that is
not practical for cavity-ferrite
combiners. Combining adjacent
channels is possible, even two
transmitters on the same frequency.
These combiners are configured
in sets of two or four channels,
and maintain reasonable insertion
losses. TW450-4HRA1

Telewave hybrid combiners use a

minimal amount of 19" rack space. MODEL FREQUENCY ISOLATION (dB) INSERTION
NUMBER BAND (MHz) TX-TX ANT-TX LOSS (dB)
Two channel units require 5.25”
rack space, and 10.5” for each four TWO CHANNEL WITH SINGLE ISOLATORS - PANEL SIZE 5.25” H x 19” W
channel combiner. There is no TW150-2HRA1 118-174 70 33 3.8
tuning required during installation. TW220-2HRA1 216-250 70 33 3.8
Each channel is equipped with a TW450-2HRA1 406-512 70 33 3.7
harmonic filter to remove any TW760-2HRA1 763-869 70 33 3.6
spurious products. TW900-2HRA1 806-960 70 33 3.6
TWO CHANNEL WITH DUAL ISOLATORS - PANEL SIZE 5.25” H x 19” W
The basic hybrid design can also be
TW150-2HRB1 118-174 100 65 4.0
integrated into any standard
TW220-2HRB1 216-250 100 65 4.0
Telewave cavity-ferrite combiner
TW450-2HRB1 406-512 100 65 3.9
system to provide outstanding
TW760-2HRB1 763-869 100 65 3.8
flexibility in frequency selection.
TW900-2HRB1 806-960 100 65 3.8
High power is available in all
FOUR CHANNEL WITH SINGLE ISOLATORS - PANEL SIZE 10.5” H x 19” W
frequency bands. Contact Telewave
f o r c u s to m i n t e g r a t i o n a n d TW150-4HRA1 118-174 70 33 6.8
applications above 150 watts. TW220-4HRA1 216-250 70 33 6.8
TW450-4HRA1 406-512 70 33 6.8
TW760-4HRA1 763-869 70 33 6.7
TW900-4HRA1 806-960 70 33 6.7
FOUR CHANNEL WITH DUAL ISOLATORS - PANEL SIZE 10.5” H x 19” W
TW150-4HRB1 118-174 100 65 7.2
TW220-4HRB1 216-250 100 65 7.2
TW450-4HRB1 406-512 100 65 7.1
TW760-4HRB1 763-869 100 65 7.0
TW900-4HRB1 806-960 100 65 7.0
SPECIFICATIONS
Input power (std. / opt.) 100 / 150 watts per channel
Harmonic attenuation (min) 65 dB
Temperature range -30°C to +60°C
Connector N Female
Weight 20-50 lb. depending on model

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 27
TWDS-1022 Rev. 10/12
2 RECEIVER MULTICOUPLERS
2 RECEIVER MULTICOUPLERS

Receiver Distribution Panels

Receiver Distribution Panels feed multiple receivers from a
single antenna, with isolation between each output port.
An integral preamplifier compensates for signal losses in
the splitters and long cable runs.

Compact Distribution Panels

Compact Receiver Panels provide 8 or 16 outputs in 1RU
(1.75”), and 24 or 32 channels in 2RU (3.5”). This allows RX
distribution capability in the same rack as a multi-channel
combiner and preselector.

Receiver Power Splitters

Power splitters divide a low-level signal and distribute
it to multiple outputs with isolation between each port.
Antenna ports are tuned with a matching network to insure
balanced input.

Preamplifiers - Bipolar / PHEMT

Preamplifiers amplify low-level signals and can improve the
noise figure of a receiver system. Bipolar preamps are very
rugged and resistant to input overload. PHEMT devices
provide a low noise figure and redundant circuitry.

Tower Top Preselectors

A tower-top preselector improves the noise figure of a
receiver system by filtering and amplifying the received
signal at the antenna, before cabling losses. Coupling
devices transfer DC power up the tower via the feedline.

Base Station Preselectors

A preselector protects a receiver or group of receivers by
filtering out all signals that are not within the operating
frequency band. Multi-window preselectors cover more
than one segment within a band. Square cavities allow very
compact designs for efficient rack layout.
 132 - 960 MHz

TWR2, TWR4 SERIES

RECEIVER DISTRIBUTION PANELS

TWR2 SERIES TWR4 SERIES

Telewave TWR2 and TWR4 Receiver series preamp and multi-voltage multiple balanced outputs from
Distribution Panels provide 2 or 4 AC power supply are included on one input, with 20-30 dB of isolation
isolated 50 ohm receiver outputs a single 5.25” panel. The preamp between ports.
from one input, in a compact can also be powered directly from
package. The antenna port is tuned a DC source.
with a matching network to insure Telewave receiver panels use high-
a balanced input. A high-gain TLA- quality splitters which provide
NOTES
MODEL FREQUENCY PORTS BANDWIDTH GAIN
1. All unused ports must
TWR2-150 132-174 MHz 2 26 MHz 0-18 dB be terminated with 50
TWR2-250 216-250 MHz 2 34 MHz 0-18 dB ohms. TWL-01 terminat-
ing resistor is available
TWR2-350 300-400 MHz 2 30 MHz 0-18 dB
for this purpose.
TWR2-450 400-512 MHz 2 40 MHz 0-18 dB
2. Panel gain is measured
TWR2-760 763-824 MHz 2 30 MHz 0-18 dB from the input port to
TWR2-860 806-960 MHz 2 30 MHz 0-18 dB any output port. Gain is
adjusted at the factory
TWR4-150 148-174 MHz 4 26 MHz 0-18 dB according to individual
TWR4-250 216-250 MHz 4 34 MHz 0-18 dB system requirements.
TWR4-350 300-400 MHz 4 40 MHz 0-18 dB 3. Tuning range and band-
TWR4-450 400-512 MHz 4 40 MHz 0-18 dB width vary depending
on frequency band and
TWR4-760 763-824 MHz 4 40 MHz 0-15 dB system components.
TWR4-860 806-960 MHz 4 40 MHz 0-15 dB 4. Exact frequencies must
COMMON SPECIFICATIONS be specified with order.
Impedance / VSWR (typ) 50 ohms / 1.3:1
Isolation RX-RX (min / typ.) 132-174 MHz: 20 dB / 25 dB
216-960 MHz: 25 dB / 30 dB
Noise figure (typ) 2.5 dB
Third order intercept +36 dBm
Intermodulation (typ) -130 dB for -30 dBm input
Temperature range -40°C to +60°C
Power requirements AC 100-240 VAC, 50-60 Hz / 0.4 A
DC +12 to +24 VDC / 200 mA (typ.)
Connectors In / Out N Female (BNC female opt.)
Dimensions (HWD) in. (cm) 5.25 x 19 x 3 (13.3 x 48.3 x 7.6)
Weight lb. (kg) 4 (1.8)

All specifications subject

30 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2033 Rev. 6/12
 30 - 960 MHz

TWR8, TWR16, TWR24 SERIES

RECEIVER DISTRIBUTION PANELS
2

MULTICOUPLERS
TWR8 SERIES TWR16 SERIES

Telewave Receiver Distribution Additional panels may be added and bandwidth varies depending
Panels are used to feed multiple at any time to increase the number on frequency band and system
receivers from a common antenna, of available outputs. New panels component s. Please contac t
reducing cost and tower loading, can be directly coupled to existing Te l e w a v e t o d i s c u s s y o u r
while providing consistent signal panels without additional parts or requirements with a sales engineer
quality, output isolation, and higher tuning. Successful multicoupling to e n s u re m a x im u m s y s te m
output levels. generally requires some type of performance.
filtering between the receiver
A typical receiver distribution panel
panel and antenna. Telewave
includes a power supply, inline low
manufactures a wide range of high
noise preamplifier, and one or two
quality preselector systems for
8-way splitters all on a single 19”
transmitters and receivers.
panel. The preamplifier provides as
much as +18 dB system gain to Telewave receiver panels provide 8
over come splitting and cable or 16 matched 50 ohm outputs
losses. from one input, with typical 25 dB
isolation between por ts. The
Telewave receiver panels are fully
antenna por t is tuned with a
shielded, and each panel has
matching network to insure a
sufficient bandwidth to cover an
balanced input. A -20 dB sample
entire commercial or Public Safety
port is also provided for connection
band. Standard panels have one
of external signal analyzers.
input, 8 or 16 outputs, and a -20 dB
sample port on a 7" x 19" panel. A Telewave can supply panels for
24 channel model is available for operation on +12 to +24 VDC, and
700/800 MHz only. For sites with 120 or 220/240 VAC. Other voltage
limited rack space, the Telewave 1R options are available on request. A
and 2R series of compact panels is battery backup on the DC input can
also available with 8 or 16 channels provide uninterrupted operation
in 1 rack unit (1.75" H), or up to 32 during a site power failure (charging
channels on a 3.5" panel. output not supplied). Tuning range

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 31
TWDS-2020 Rev. 6/12
 30 - 960 MHz

TWR8-, 16-, 24- SERIES

MODEL FREQUENCY PORTS BANDWIDTH GAIN

NOTES
TWR8-030 30-88 MHz 8 58 MHz 0-18 dB 1. All unused ports must
TWR8-050 50-512 MHz 8 400 MHz 0-18 dB be terminated with 50
TWR8-150 132-174 MHz 8 42 MHz 0-18 dB ohms. TWL-01 terminat-
ing resistor is available
TWR8-250 216-250 MHz 8 34 MHz 0-18 dB for this purpose.
TWR8-350 300-400 MHz 8 40 MHz 0-18 dB 2. Panel gain is measured
TWR8-450 400-512 MHz 8 40 MHz 0-18 dB from the input port to
any output port. Gain is
TWR8-760 763-824 MHz 8 40 MHz 0-12 dB
adjusted at the factory
TWR8-860 806-960 MHz 8 40 MHz 0-12 dB according to individual
TWR16-030 30-88 MHz 16 58 MHz 0-15 dB system requirements.
Standard gain is 6 dB if
TWR16-050 50-512 MHz 16 400 MHz 0-15 dB not specified.
TWR16-150 132-174 MHz 16 42 MHz 0-15 dB 3. Tuning range and band-
TWR16-250 216-250 MHz 16 34 MHz 0-15 dB width vary depending
TWR16-350 300-400 MHz 16 40 MHz 0-15 dB on frequency band and
system components.
TWR16-450 400-512 MHz 16 40 MHz 0-15 dB
4. Exact frequencies and
TWR16-760 763-824 MHz 16 40 MHz 0-8 dB system gain must be
TWR16-860 806-960 MHz 16 40 MHz 0-8 dB specified with order.
TWR24-760 763-824 MHz 24 40 MHz 0-6 dB
TWR24-860 806-960 MHz 24 40 MHz 0-6 dB
COMMON SPECIFICATIONS
Impedance / VSWR (typ) 50 ohms / 1.3:1
Isolation RX-RX (min / typ.) 30-174 MHz: 20 dB / 25 dB
216-960 MHz: 25 dB / 30 dB
Noise figure (typ) 2.5 dB
Third order intercept +36 dBm
Intermodulation (typ) -130 dB for -30 dBm input
Sample port -20 dB
Temperature range -40°C to +60°C
Power requirements AC 120 VAC (std.) 220/240 VAC (opt.)
DC +11.5 to +15 VDC (power reverting)
+12 to +24 VDC (direct to preamp)
Connectors Input - N Female
Output - N or BNC Female (opt.)
Dimensions (HWD) in. (cm) 7 x 19 x 3 (17.8 x 48.3 x 7.6)
Weight lb. (kg) 8 / 16 / 24 ch 5.5 (2.5) / 6 (2.7) / 6.5 (2.9)

All specifications subject

32 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2020 Rev. 6/12
 30 - 960 MHz

TWR8, TWR16 -1R SERIES

COMPACT RECEIVER PANELS
2

MULTICOUPLERS
FEATURES
• 25 dB TYPICAL PORT
TO PORT ISOLATION
• N OR BNC OUTPUT
• 0.7 TO 2.5 dB TYPICAL
NOISE FIGURE
• MODULAR DESIGN
• VHF-LOW/HIGH, UHF,
700/800/900 TRUNKING
• NO TUNING REQUIRED
• 1 RACK UNIT (1.75” x 19”) TWR16-450-1R

• 24 AND 32 CHANNELS
AVAILABLE IN 2 RU

Telewave Compac t Receiver New panels c an be direc tly This design is especially suited for
Distribution Panels are used to c o u p l e d t o ex i s t i n g p a n e l s battery, solar panels, and thermal
feed multiple receivers from a withou t additional par t s or generator sources. An external
common antenna, reducing cost tuning. Successful multicoupling DC-DC converter allows operation
and tower loading, while generally requires some type of from DC inputs as low as +9.5
p rov id i n g co n s i s te n t s ig n a l filtering between the receiver VDC.
quality, output isolation, and panel and antenna. Telewave
The 1R series ships standard with
higher output levels. manufactures a wide range of
a n i n li n e l ow n o i s e b i p o l a r
high quality preselector systems
A typical receiver dis tri bu tion preamplifier (except TT models).
for transmitters and receivers.
panel includes a power supply, Optional items include PHEMT
inline low noise preamplifier, and Telewave receiver panels use high- preamps for lower noise figure,
one or two 8-way splitters all on quality splitters to provide 8 or 16 high 3rd order intercept preamps
a single 19” tray. The preamplifier matched 50 ohm outputs from one for RF congested sites, redundant
provides as much as +18 dB input, with typical 25 dB isolation preamps for maximum reliability
system gain to overcome splitting between ports. The antenna port at remote sites, and broadband
and cable losses. is tuned with a matching network preamps for multi-band
to insure a balanced input. applications.
Telewave 1R panels provide full
performance in only 1RU. The 8 These units, with their specially
channel unit can be easily field designed power supply, can be
expanded to 16 channels, by powered from an AC or DC source.
adding an additional 8 channel The internal DC input circuitry will
s p l i t t e r. A l l r e c e i v e r p a n e l allow the external input DC voltage
components are fully shielded, to vary between +11.5 VDC to +15
and each panel has sufficient VDC, while keeping the DC output
bandwidth to cover an entire voltage constant. This feature
commercial or Public Safet y allows the preamplifier to perform
band. at its rated gain, 1 dB compression
point, and 3rd order intercept point.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 33
TWDS-2021 Rev. 6/12
 30 - 960 MHz

TWR8, TWR16 -1R SERIES

FREQUENCY
MODEL RANGE PORTS BANDWIDTH OPTIONS
TWR8-030-1R, RA 30-88 MHz 8 58 MHz 1
TWR8-050-1R, RA 50-512 MHz 8 400 MHz 1
TWR8-150-1R, RA, RTT 132-174 MHz 8 42 MHz 1,2 OPTIONS:
TWR8-250-1R, RA, RTT 216-250 MHz 8 42 MHz 1,2 1. RA: 0-10 dB step
TWR8-350-1R, RA, RTT 300-400 MHz 8 40 MHz 1,2 attenuator
(std. gain 1 to 11 dB)
TWR8-450-1R, RA, RTT 400-512 MHz 8 40 MHz 1,2
2. RTT: 1 amp meter
TWR8-760-1R, RA, RTT 763-824 MHz 8 40 MHz 1,2 movement & DC
TWR8-860-1R, RA, RTT 806-960 MHz 8 40 MHz 1,2 injector to power
Tower Top Preamp.
TWR16-030-1R, RA 30-88 MHz 16 58 MHz 1
TWR16-050-1R, RA 50-512 MHz 16 400 MHz 1 NOTES
TWR16-150-1R, RA, RTT 132-174 MHz 16 42 MHz 1,2 1. All unused ports must
be terminated with 50
TWR16-250-1R, RA, RTT 216-250 MHz 16 42 MHz 1,2
ohms. TWL-01 terminat-
TWR16-350-1R, RA, RTT 300-400 MHz 16 40 MHz 1,2 ing resistor is available
TWR16-450-1R, RA, RTT 400-512 MHz 16 40 MHz 1,2 for this purpose.
TWR16-760-1R, RA, RTT 763-824 MHz 16 40 MHz 1,2 2. Panel gain is measured
from the input port to
TWR16-860-1R, RA, RTT 806-960 MHz 16 40 MHz 1,2 any output port. Gain is
COMMON SPECIFICATIONS adjusted at the factory
according to individual
Impedance / VSWR (typ) 50 ohms / 1.3:1 system requirements.
Isolation port to port (min / typ.) 30-174 MHz: 20 dB / 25 dB Standard gain is 6 dB if
216-960 MHz: 25 dB / 30 dB not specified.
System gain (factory adj.) 8 ch. 30-760 MHz: 0-18 +/-1 dB 3. Tuning range and band-
760-960 MHz: 0-12 +/-1 dB width vary depending
16 ch. 30-760 MHz: 0-15 +/-1 dB on frequency band and
760-960 MHz: 0-8 +/-1 dB system components.
Noise figure (max) 2.5 dB 4. Exact frequencies and
system gain must be
Third-order intercept (typ) +36 dBm specified with order.
Intermodulation (typ) -130 dB for -30 dBm input
Temperature range -40°C to +60°C
Power requirements AC 120 VAC (std.) 220/240 VAC (opt.)
DC +11.5 to +15 VDC (regulated output)
+12 to +24 VDC (direct to preamp)
Connectors Input - N Female
Output - N or BNC Female (opt.)
Dimensions (HWD) in. (cm) 1.75 x 19 x 11 (4.5 x 48.3 x 27.9)
Weight lb. (kg) 8 ch / 16 ch 6.5 (3.0) / 8.5 (3.9)

All specifications subject

34 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2021 Rev. 6/12
 30 - 960 MHz

TWR24/32-2R SERIES
COMPACT RECEIVER PANELS
2

MULTICOUPLERS
FEATURES
• 25 dB TYPICAL PORT
TO PORT ISOLATION
• N OR BNC CONNECTORS
• 0.7 TO 2.5 dB TYPICAL
NOISE FIGURE
• MODULAR DESIGN
• VHF-LOW/HIGH, UHF,
700/800/900 TRUNKING
• NO TUNING REQUIRED
• ONLY 2 RU (3.5” x 19”)
TWR32-150-2R

Telewave 2R Compact Receiver generally requires some type of DC-DC converter allows operation
Distribution Panels are used at filtering between the receiver from DC inputs as low as +9.5
medium to high density sites panel and antenna. Telewave VDC.
to feed multiple receivers from manufactures a wide range of
The 2R series ships standard
a common antenna, reducing high quality preselector systems
with an inline low noise bipolar
cost and tower loading, while for transmitters and receivers.
preamplifier (except TT models).
providing consistent signal
Telewave 2R Receiver Panels use Optional items include PHEMT
quality, output isolation, and
high-quality splitters to provide preamps for lower noise figure,
higher output levels.
24 or 32 matched 50 ohm outputs high 3rd order intercept preamps
A typical receiver dis tri bu tion from one input, with typical 25 for RF congested sites, redundant
panel includes a power supply, dB isolation bet ween por t s. preamps for maximum reliability
inline low noise preamplifier, The antenna port is tuned with at remote sites, and broadband
and three or four 8-way splitters a matching network to insure a preamps for multi-band
all on a single 19” tray. The balanced input. applications.
preamplifier provides as much as
These units, with their specially
+12 dB system gain to overcome
designed power supply, can be
splitting and cable losses.
powered from an AC or DC source.
Telewave 2R panels provide full The internal DC input circuitry will
performance in only 2RU. All allow the external input DC voltage
receiver panel components are to vary between +11.5 VDC to +15
fully shielded, and each panel VDC, while keeping the DC output
has sufficient bandwidth to cover voltage constant. This feature allows
an entire commercial or Public the preamplifier to perform at its
Safety band. rated gain, 1 dB compression point,
and 3rd order intercept point.
New panels can be directly
c o u p l e d t o e x i s t i n g p a n e l s This design is especially suited for
w i t h o u t a d d i t i o n a l p a r t s o r battery, solar panels, and thermal
tuning. Successful multicoupling generator sources. An external

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 35
TWDS-2030 Rev. 6/12
 30 - 960 MHz

TWR24/32-2R SERIES

MODEL FREQUENCY PORTS BANDWIDTH GAIN

NOTES
TWR24-030-2R 30-88 MHz 24 58 MHz 0-12 dB 1. All unused ports must
TWR24-050-2R 50-512 MHz 24 400 MHz 0-12 dB be terminated with 50
TWR24-150-2R 132-174 MHz 24 42 MHz 0-12 dB ohms. TWL-01 terminat-
ing resistor is available
TWR24-250-2R 216-250 MHz 24 34 MHz 0-12 dB for this purpose.
TWR24-350-2R 300-400 MHz 24 40 MHz 0-12 dB 2. Panel gain is measured
TWR24-450-2R 400-512 MHz 24 40 MHz 0-12 dB from the input port to
any output port. Gain is
TWR24-760-2R 763-824 MHz 24 40 MHz 0-5 dB adjusted at the factory
TWR24-860-2R 806-960 MHz 24 40 MHz 0-5 dB according to individual
TWR32-030-2R 30-88 MHz 32 58 MHz 0-12 dB system requirements.
Standard gain is 6 dB if
TWR32-050-2R 50-512 MHz 32 400 MHz 0-12 dB not specified.
TWR32-150-2R 132-174 MHz 32 42 MHz 0-12 dB 3. Tuning range and band-
TWR32-250-2R 216-250 MHz 32 34 MHz 0-12 dB width vary depending
TWR32-350-2R 300-400 MHz 32 40 MHz 0-12 dB on frequency band and
system components.
TWR32-450-2R 400-512 MHz 32 40 MHz 0-12 dB
4. Exact frequencies and
TWR32-760-2R 763-824 MHz 32 40 MHz 0-5 dB system gain must be
TWR32-860-2R 806-960 MHz 32 40 MHz 0-5 dB specified with order.
COMMON SPECIFICATIONS
Impedance / VSWR (typ.) 50 ohms / 1.3:1
Isolation port to port (min / typ.) 30-174 MHz: 20 dB / 25 dB
216-960 MHz: 25 dB / 30 dB
Noise figure (typ) 2.5 dB
Intermodulation (typ) -130 dB for -30 dBm input
Third order intercept +36 dBm
Temperature range -40°C to +60°C
Power requirements AC 120 VAC (std.) 220/240 VAC (opt.)
DC +11.5 to +15 VDC (regulated output)
+12 to +24 VDC (direct to preamp)
Connectors Input - N Female
Output - N or BNC Female (opt.)
Dimensions (HWD) in. (cm) 3.5 x 19 x 11 (8.9 x 48.3 x 27.9)
Weight lb. (kg) 24 / 32 ch. 11 (5.0) / 13 (5.9)

All specifications subject

36 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2030 Rev. 6/12
 10 - 1000 MHz

PS- SERIES
RECEIVER POWER SPLITTERS
2
Telewave Receiver Power Splitters to compensate for coupler and

MULTICOUPLERS
provide 2 to 8 matched 50 ohm cable losses.
receiver outputs from one input. These rugged, compact splitters
The antenna port is tuned with a are commonly used in R X
matching network to insure a multicouplers, and are not intended
balanced input. to be used with transmitters.
Since the input signal is split evenly Telewave makes a full line of
between all ports, the available transmitter power dividers with
signal at each output port will be 3 500 watt power capability for this
to 9 dB below the input. For this purpose.
reason, a preamp is generally used
MODEL PORTS FREQUENCY BANDWIDTH STD. TUNE
PS-302 2 33-50 MHz 8 MHz 38-46 MHz Two-Way Splitter
PS-702 2 72-88 MHz 16 MHz 72-88 MHz
PS-1502 2 132-174 MHz 26 MHz 148-174 MHz
PS-1504 4 148-174 MHz 26 MHz 148-174 MHz
PS-3302 2 320-390 MHz 30 MHz 350-380 MHz
PS-4502 2 400-512 MHz 40 MHz 450-470 MHz
PS-4504 4 400-512 MHz 40 MHz 450-470 MHz
PS-4508 8 400-512 MHz 40 MHz 450-470 MHz
Four-Way Splitter
PS-5002 2 10-1000 MHz 1000 MHz N/A
PS-5004 4 10-1000 MHz 1000 MHz N/A
PS-5008 8 30-512 MHz 500 MHz N/A
PS-7602 2 763-824 MHz 30 MHz 793-824 MHz
PS-7604 4 763-824 MHz 40 MHz 793-824 MHz
PS-7608 8 763-824 MHz 40 MHz 793-824 MHz
PS-8602 2 806-960 MHz 30 MHz 806-824 MHz
Eight-Way Splitter
PS-8604 4 806-960 MHz 40 MHz 806-824 MHz
PS-8608 8 806-960 MHz 40 MHz 806-824 MHz
COMMON SPECIFICATIONS
Impedance / VSWR (typ.) 50 ohms / 1.3:1
Isolation (min / typ.) 20 dB / 25 dB
Input - N Female
Connectors Output - N or BNC Female (opt.)
Dimensions 2-way in. (cm) 1.25 x 2.25 x 1.5 (3.2 x 5.7 x 3.8)
Wideband Splitter - PS-5002
4-way in. (cm) 1.75 x 4.25 x 2.5 (4.5 x 10.8 x 6.4)
8-way in. (cm) 8 x 5.25 x 1 (20.3 x 13.3 x 2.5)
PS-5002 in. (cm) 2.75 x 2 x 0.75 (7 x 5.1 x 1.9)
PS-5004 in. (cm) 3.5 x 3 x 0.75 (8.9 x 7.6 x 1.9)
Coupling loss 2 / 4 / 8-port 3 / 6 / 9 dB
Insertion loss (typ.) 2 / 4 / 8-port 0.2 / 0.4 / 0.6 dB
Weight lb. (kg) 2 / 4 / 8-port 1 (0.45) / 2 (0.9) / 3 (1.4)
Note: Splitters are normally factory tuned as indicated. Other ranges must
be specified with order. Terminate unused ports with 50 ohms. Wideband Splitter - PS-5004

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 37
TWDS-2013 Rev. 5/12
 30 - 960 MHz

TLA SERIES
LOW NOISE BIPOLAR INLINE PREAMPLIFIERS

FEATURES
• 50 OHM INPUT/OUTPUT
Signal
• OVER-VOLTAGE/POLARITY PROTECTION input
• VERSATILE MOUNTING OPTIONS
• HIGH THIRD ORDER INTERCEPT
• RESISTANT TO INPUT OVERLOAD

Telewave TLA Series in-line preamplifiers

use surface-mount bipolar devices to
amplify low level RF signals by up to 34
dB. The primary application of these
preamplifiers is to improve the noise figure Signal
of a receiver system. Preamps compensate output
for splitter insertion loss or losses from
DC input
long coax cable runs, and increase signal
levels to spectrum analyzers or other test
equipment.
Each preamplifier is housed in a rugged,
custom made, RF-tight aluminum enclosure.
The DC input is reverse polarity protected,
and equipped with a high-pass filter to
eliminate RFI. Preamplifiers are tuned to
customer specified center frequencies.

COMMON SPECIFICATIONS MODEL FREQUENCY BANDWIDTH

Impedance / VSWR (max) 50 ohms / 1.3:1 TLA50-12 30-88 MHz 60 MHz
Noise figure (typ) 2.5 dB TLA150-12 132-174 MHz 50 MHz
Gain (factory adjusted) 30-88 MHz: +8 to +34 dB TLA220-12 216-250 MHz 50 MHz
(Standard gain is 16 dB +/- 1 dB) 132-512 MHz: +6 to +28 dB TLA330-12 320-390 MHz 70 MHz
760-960 MHz: +6 to +21 dB TLA450-12 400-512 MHz 112 MHz
1 dB compression (typ) +25 dBm TLA760-12 763-824 MHz 50 MHz
3rd order intercept (typ) +35 dBm TLA860-12 806-960 MHz 50 MHz
Power requirements +12 to +24 VDC, 170 mA NOTE: These preamplifiers are for receiver use
only. They are not designed to accept transmitter
Transient protection 20 kV / 1 μs power levels.
Temperature range 0°C to +40°C
Enclosure Gold or clear alodine
Hardware Stainless steel
Connectors N Female (SMA, BNC opt.)
Dimensions (HWD) in. (cm) 1.3 x 2.25 x 2.0 (3.3 x 5.7 x 5.1)
Footprint in. (cm) 3.25 x 2.25 (8.3 x 5.7)
Net weight oz (g) 3.8 (108)
Shipping weight lb. (kg) 1 (0.45)

All specifications subject

38 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2002 Rev. 5/12
 132 - 960 MHz

TGA SERIES
PHEMT PREAMPLIFIERS
2

MULTICOUPLERS
FEATURES
• VERY LOW NOISE
• 50 OHM INPUT/OUTPUT
• OVER-VOLTAGE / POLARITY
PROTECTION
• VERSATILE MOUNTING DC input
OPTIONS
• COMMON PORT
INDUCTANCE
Telewave TGA Series in-line
preamplifiers utilize PHEMT devices
to amplify low-level RF signals by
up to 18 dB. The primary application
of these preamplifiers is to improve
the noise figure of a receiver system. Each preamplifier is housed in a NOTE: These preamplifiers are
Preamps compensate for splitter rugged, custom made, RF-tight for receiver use only. They are not
aluminum enclosure. The DC input designed to accept transmitter
insertion loss or losses from long power levels.
coax cable runs, and increase signal is reverse polarity protected, and
levels to spectrum analyzers or equipped with a high-pass filter to
other test equipment. eliminate RFI.

MODEL TGA150-12 TGA220-12 TGA450-12 TGA750-12 TGA860-12

Frequency range 132-174 MHz 220-250 MHz 400-512 MHz 763-824 MHz 806-960 MHz
Bandwidth (typ) 5 MHz 6 MHz 60 MHz 100 MHz 100 MHz
Noise figure (typ) 0.4 dB 0.5 dB 0.5 dB 0.7 dB 0.7 dB
Gain (typ) +18 dB +18 dB +17 dB +13 dB +13 dB
COMMON SPECIFICATIONS
Impedance / VSWR (max) 50 ohms / 1.3:1
1 dB compression (typ) +12 dBm
3rd order intercept (typ) +26 dBm
Power requirements +9 to +18 VDC, 40 mA
Transient protection 40 kV / 1 μs
Temperature range 0° to +40°C
Enclosure Irridited aluminum
Hardware Stainless steel
Connectors N Female (SMA, BNC opt.) Teflon dielectric, gold pin
Dimensions (HWD) in. (cm) 1.5 x 2.5 x 0.7 (3.8 x 6.4 x 1.8)
Net weight oz (g) 5.4 (154)
Shipping weight lb. (kg) 1 (0.45)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 39
TWDS-2003 Rev. 5/12
 132 - 960 MHz

TWR1 SERIES
RACK MOUNT PHEMT PREAMPLIFIERS

The TWR-1 Series of Rack Mount rack-unit aluminum panel. Primary NOTE: These preamplifiers are for
PHEMT Preamplifiers provide up to input power is 120 or 220 VAC, receiver use only.
They are not designed to accept
+18 dB of user-controllable gain in and DC backup requires +11 to transmitter power levels.
a receiver system. These preamps +15 VDC. The DC input is reverse
provide extra gain to compensate polarity protected, and equipped
for loss of signal from tower with a high-pass filter to eliminate
extension, receiver filtering, or long RFI. Standard gain is +1 to +11 dB.
cable runs. Each unit consists of Any range between +1 to +11 and
a low-noise PHEMT preamplifier, +8 to +18 dB may be specified,
a 10 dB rotary step attenuator, depending on frequency.
and a regulated switching power
supply mounted on a 19-inch single

MODEL TWR1-150 TWR1-220 TWR1-450 TWR1-760 TWR1-860

Frequency range 132-174 MHz 200-250 MHz 400-512 MHz 763-824 MHz 806-960 MHz
Bandwidth (typ) 5 MHz 6 MHz 50 MHz 100 MHz 100 MHz
Noise figure (typ) 0.4 dB 0.5 dB 0.5 dB 0.7 dB 0.7 dB
Gain range (typ) +1 to +11 dB +1 to +11 dB +1 to +11 dB +1 to +11 dB +1 to +11 dB
+8 to +18 dB +8 to +18 dB +7 to +17 dB +4 to +14 dB +4 to +14 dB
COMMON SPECIFICATIONS
Impedance / VSWR (typ) 50 ohms / 1.3:1
1 db compression (typ) +12 dBm
3rd order intercept (typ) +26 dBm
Transient protection 40 kV / 1 μs
Temperature range 0°C to +40°C
Power requirements AC 120 VAC (std.) or 220 VAC (opt.)
DC +11.5 to +15 VDC or +9 to +18 VDC
Current drain (typ) 50 mA
Dimensions (HWD) in. (cm) 1.75 x 19 x 5 (4.5 x 48.3 x 12.7)
Connectors N Female
Net weight lb. (kg) 2.5 (1.1)
Shipping weight lb. (kg) 3.5 (1.6)

All specifications subject

40 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2004 Rev. 5/12
 300 - 901 MHz

TOWER TOP PREAMPLIFIERS

WITH INTEGRATED PRESELECTORS
2
Telewave Integrated Tower Top

MULTICOUPLERS
Preamplifier systems recover low-
level signals from long or high loss
transmission lines and optimize
system performance. The Telewave
system allows single, multi-band
and/or multi-window operation in
the 300-400, 400-512, 793-824, and
806-901 MHz receiver bands.
The RF preamplifier is designed
with two PHEMT devices in a
redundant hybrid configuration. A
single device failure causes a 6 dB
reduction in gain, but the amplifier
continues to operate with stable
TTPA-3548 Tower Top
impedance. This provides high Preamp/Preselector
operational reliability. Very low
loss input circuits provide the best Each filter is custom designed to DC current levels are monitored
possible noise figure. DC surge operate in the most adverse RF with a built-in metering panel.
and reverse voltage protection is environments.
The enclosure is fully weather-
provided.
The base power supply provides sealed, compliant with NEMA 4.
The preselector filter systems DC coupling and decoupling to the
incorporate combline, cavity and transmission line and connection to
multi-window technologies. the receiver distribution system.

ELECTRICAL SPECIFICATIONS
Frequency ranges 300-512, 793-824, 896-901 MHz
System gain (max, single band) 17 dB (factory adjusted)
3rd order intercept (typ) +40 dB
Noise figure (typ) 0.8 dB
VSWR 1.3:1
Lightning protection Impulse supressor (Polyphaser)
Power requirements +15 VDC / 280 mA (+12 VDC opt.)
Temperature range -40°C to +70°C
MECHANICAL SPECIFICATIONS Dimensions (HWD) in. (cm) Weight lb. (kg)
Tower box TTPA-4586 24 x 20 x 12 (61 x 51 x 31) 39 (17.7)
TTPA-8626 16 x 16 x 6 (41 x 41 x 15) 39 (17.7)
TTPA-8690 16 x 16 x 10 (41 x 41 x 25) 39 (17.7)
Base supply 19 x 3.5 x 7.25 (48 x 9 x 14) 4.7 (2.1)
Finish Tower box NEMA 4 - Gray polyester powder coat
Base supply Grained aluminum
Connectors N Female

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 41
TWDS-2022 Rev. 5/12
 455 - 512 MHz

TTPA-4544
TOWER TOP PREAMPLIFIER / PRESELECTOR

Telewave Integrated Tower Top

Preamplifier systems recover low-
level signals from long or high loss
transmission lines and optimize
system performance. The Telewave
system enables single or multi-
window operation in the 450-512
MHz receiver bands.
The RF preamplifier is designed
with two PHEMT devices in a
redundant hybrid configuration. A
single device failure causes a 6 dB
reduction in gain, but the amplifier
continues to operate with stable
impedance. This provides high TTPA-4544 Towertop Preamplifier
operational reliability. Very low
loss input circuits provide the best Each filter is custom designed to DC current levels are monitored
possible noise figure. DC surge operate in the most adverse RF with a built-in metering panel.
and reverse voltage protection is environments.
The enclosure is fully weather-
provided.
The base power supply provides sealed, compliant with NEMA 4.
The preselector filter systems DC coupling and decoupling to the
incorporate combline, cavity and transmission line and connection to
multi-window technologies. the receiver distribution system.

ELECTRICAL SPECIFICATIONS
Frequency ranges (MHz) 455-460, 465-470, 470-512
System gain (single band) 17 dB (factory adjusted)
Noise figure (typ) 0.8 dB
3rd order intercept (typ) +40 dB
Power requirements +15 VDC / 280 mA (+12 VDC opt.)
VSWR 1.3:1
Lightning protection Impulse supressor (Polyphaser)
Temperature range -40°C to +70°C
MECHANICAL SPECIFICATIONS
Dimensions Tower box (HWD) in. (cm) 20 x 16 x 11.5 (50.8 x 40.6 x 29.2)
Base supply 19 x 3.5 x 7.25 (48.3 x 8.9 x 18.4)
Weight Tower box lb. (kg) 39 (17.7)
Base supply 4.7 (2.1)
Finish Tower box NEMA 4 - Gray polyester powder coat
Base supply Grained aluminum
Connectors N Female

All specifications subject

42 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2009 Rev. 5/12
 806 - 960 MHz

TTPA-8626, 8644, 8648

TOWER TOP PREAMPLIFIER / PRESELECTOR
2

MULTICOUPLERS
TPCP-8648
Filter Type: Pass Cavity
0

10

20

30

40

50

60

TTPA-8648 TTPA-8626 70

80

798 803 808 813 818 823 828

ELECTRICAL SPECIFICATIONS Frequency (MHz)

Frequency range 806-960 MHz

TPCP-8626
System gain (typ) 15 dB to 17 dB Filter Type: Combline
0
Preselector Bandwidth (MHz) 5, 6, 10, 15, 20
Noise figure Bipolar PHEMT 10

2.7 dB 1.2 dB 20

3rd order intercept Point +35 dBm +33 dBm

Attenuation (dB)

30
Hybrid combined redundant pair
Redundancy 40
with tower top bypass relay
DC Input Voltage +15 VDC / 280 mA (+12 VDC opt.) 50

Input VSWR <1.3:1 60

Lightning protection Impulse suppressor type
70
Temperature range -40°C to +70°C
80
MECHANICAL SPECIFICATIONS
Dimensions HWD in. (cm)
-60 -40 -20 Fo +20 +40 +60
10, 15, 20 MHz BW 16 x 8 x 6 (40.6 x 30.3 x 15.2) Frequency (MHz)
5, 6 MHz BW 16 x 16 x 8 (40.6 x 40.6 x 30.3)
Weight: Tower box lb. (kg) 39 (17.7)
Connector type N-Type, gold center pin
Finish: Tower box NEMA 4 - Gray polyester
powder coat
Optional sampling port available, connected to input of preselector for
tower-top effective sensitivity measurements. Requires extra coax run.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 43
TWDS-2014 Rev. 12/12
 TTBS-4586
TOWER TOP BASE POWER SUPPLY

The Telewave TTBS-4586 Base The Base Power Supply accepts A front panel step attenuator is
Power Supply provides up to 1 AC or optional DC input, or both, also available.
amp of regulated DC power for any depending on system requirements.
Telewave tower mounted preamp. A built-in DC-DC converter allows
DC input up to 75 VDC. The panel
The TTBS-4586 is designed around
requires a 3.5” x 19” rack space, and
a custom power supply, which
includes a 1 amp current meter.
supplies +15 VDC to the preamp
via the coax cable. Voltage is The optional TCMA-300 current
coupled to the transmission line monitor and alarm panel provides
by a Polyphaser GX series impulse adjustable high and low current
suppressor, which incorporates a trip points with form ”C” contact
DC power injector. closure and LED status alarm.

ELECTRICAL SPECIFICATIONS
AC input voltage 100-240 VAC, 50-60 Hz / 0.4 A
DC output voltage (to tower unit) +15 VDC / 1A
Stand by dc input voltage (opt) +/- 9-18, 18-36, or 36-75 VDC
Input / output VSWR <1.3:1
Lightning protection Impulse suppressor, 20 kA
Temperature range -40°C to +70°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 3.5 x 19 x 7.25 (8.9 x 48.3 x 18.4)
Weight lb. (kg) 4.7 (2.1)
RF Connectors N-female
Finish Grained aluminum, clear alodine
Optional front panel Black paint

All specifications subject

44 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2032 Rev. 5/12
 118 - 136 MHz

TPCP-1342C / TPCP-1343C
COMPACT VHF AIRBAND PRESELECTORS
2

MULTICOUPLERS
TPCP-1342C TPCP-1343C

The TPCP-1342C and TPCP-1343C

offer high performance in a compact
de sign for the VHF Air band. A
cus tom extruded 4-inch square
cavity allows horizontal mounting
on a standard 19-inch rack, with Attenuation (dB)
rack height of 5.25”. TPCP-1342C
The TPCP-1342C uses two cavities
to provide typical attenuation of TYPICAL RESPONSE CURVES
better than 50 dB at +/- 5 MHz. The
TPCP-1343C uses three cavities,
and provides typical attenuation of
better than 70 dB.

TPCP-1343C

Frequency (MHz)
SPECIFICATIONS TPCP-1342C TPCP-1343C
Frequency range 118-136 MHz
Bandpass (typ) 700 KHz 1.5 MHz
Attenuation at +/- 5 MHz (typ) 45 dB 70 dB
Insertion loss (typ) 2.0 dB 2.0 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 2 / 4” 3 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) 5.25 x 19 x 17 (13.3 x 48.3 x 43.2)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 13 (5.9) 16 (7.3)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 45
TWDS-2016 Rev. 10/12
 118 - 136 MHz

TPCP-1344C / TPCP-1344CM
COMPACT VHF AIRBAND PRESELECTOR

The TPCP-1344C/CM offers high

performance in a compact design
for the 118-136 MHz VHF airband.
The TPCP-134 4C provides a
bandpass of 2 MHz or less, with
typical isolation of better than 50
dB at +/- 5 MHz, and insertion loss
of 1.5 dB or less.
A custom extruded 4-inch square
cavity allows horizontal mounting
on a standard 19-inch rack, with rack
height of 5.25"(C) and 4"(CM). The TPCP-1344C
“C” model mounts in a 19-inch EIA
rack, and the “CM” has adjustable
mounting tabs for installation in a TYPICAL RESPONSE CURVES
cabinet. 0
10
Attenuation (dB)

20
30
40
50
60
70

TPCP-1344CM 125.0 130.0 135.0

Frequency (MHz)

SPECIFICATIONS - TPCP-1344C / CM
Frequency range 118-136 MHz
Bandpass (max) 2 MHz
Attenuation at +/- 5 MHz Fc (min) 50 dB
Insertion loss (typ) 1.5 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 4 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) C 5.25 x 19 x 18 (13.3 x 48.3 x 45.7)
(Tuners fully extended) CM 4 x 19 x 18 (10.2 x 48.3 x 45.7)
Mounting C 19” rack mount
CM 19” cabinet mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 19.5 (8.9)

All specifications subject

46 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2029 Rev. 10/12
 135 - 151 MHz

TPCP-1442C / TPCP-1443C
COMPACT VHF PRESELECTORS
2

MULTICOUPLERS
TPCP-1442C TPCP-1443C

The TPCP-1442C and TPCP-1443C

offer high performance in a compact
design for the 135-151 MHz VHF
band.
A custom extruded 4-inch square
cavity allows horizontal mounting Attenuation (dB)
TPCP-1442C
on a standard 19-inch rack, with rack
height of 5.25”. The TPCP-1442C 135.0 140.0 145.0
uses two cavities to provide typical TYPICAL RESPONSE CURVES
attenuation of bet ter than 50 dB
at +/- 5 MHz, and insertion loss of
1.0 dB or less. The TPCP-1443C
uses three cavities, and provides
typical attenuation of better than
70 dB, and insertion loss of 1.5 dB
or less.
TPCP-1443C
135.0 140.0 145.0
Frequency (MHz)
SPECIFICATIONS TPCP-1442C TPCP-1443C
Frequency range 135-151 MHz
Bandpass (typ) 700 KHz 1.5 MHz
Attenuation at +/- 5 MHz 50 dB (min) 70 dB (min)
Insertion loss (typ) 1.0 dB 2.0 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 2 / 4” 3 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) 5.25 x 19 x 15 (13.3 x 48.3 x 38.1)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 12 (5.4) 15 (6.8)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 47
TWDS-2027 Rev. 10/12
 135 - 151 MHz

TPCP-1444C / TPCP-1444CM
COMPACT VHF PRESELECTOR

The TPCP-1444C/CM offers high

performance in a compact design
for the 135-151 MHz VHF band. The
TPCP-1444C provides a bandpass
of 2 MHz or less, with typical
isolation of better than 50 dB at
+/- 5 MHz, and insertion loss of 1.5
dB or less.
A custom extruded 4-inch square
cavity allows horizontal mounting
on a standard 19-inch rack, with
rack height of 5.25” (C) and 4” TPCP-1444C
(CM). The “C” model mounts in
a 19-inch EIA rack, and the “CM”
has adjustable mounting tabs for TYPICAL RESPONSE CURVES
installation in a cabinet. 0
10
Attenuation (dB)

20
30
40
50
60
70

TPCP-1444CM 135.0 140.0 145.0

Frequency (MHz)

SPECIFICATIONS - TPCP-1444C / CM
Frequency range 135-151 MHz
Bandpass (max) 2 MHz
Attenuation at +/- 5 MHz Fc (min) 50 dB
Insertion loss (typ) 1.5 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 4 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) C 5.25 x 19 x 18 (13.3 x 48.3 x 45.7)
(Tuners fully extended) CM 4 x 19 x 18 (10.2 x 48.3 x 45.7)
Mounting C 19” rack mount
CM 19” cabinet mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 19.5 (8.9)

All specifications subject

48 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2010 Rev. 10/12
 135 - 151 MHz

TPCP-1446C
COMPACT VHF PRESELECTOR
2
The TPCP-1446C of fers high

MULTICOUPLERS
performance in a compact design
for the 135-151 MHz VHF band.
Six square, pass-reject cavities
provide greater than 8 0 dB
at tenuation at +/- 5 MHz, with a
bandpass of 2.2 MHz or less, and
insertion loss of 2.5 dB or less.
The custom-extruded 4” cavities
allow horizontal rack mounting on a
standard 19" rack, with rack height
of only 8.75".

TYPICAL RESPONSE CURVES

0
10
20
Attenuation (dB)

30
40
50
60
70
80

135.0 140.0 145.0

Frequency (MHz)

SPECIFICATIONS - TPCP-1446C
Frequency range 135-151 MHz
Bandpass (max) 2.2 MHz
Attenuation at +/- 5 MHz 80 dB
Insertion loss (typ) 2.5 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 6 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) 8.75 x 19 x 18
(Tuners fully extended) (22.2 x 48.3 x 45.7)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 36.5 (16.6)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 49
TWDS-2011 Rev. 10/12
 140 - 180 MHz
TPCP-1414 140-150 MHz
TPCP-1514 150-160 MHz
TPCP-1414, -1514, -1614, -1714 TPCP-1614 160-170 MHz

COMPACT VHF PRESELECTORS TPCP-1714 170-180 MHz

The TPCP-1414, -1514, -1614,

and -1714 are ver y compac t,
4-cavity preselectors for the VHF
band from 140-180 MHz. These
preselectors produce a minimum
of 45 dB attenuation, and are ideal
for limited space applications,
including portable repeaters and
mobile installations.
Simple mounting to any flat surface
allows maximum flexibility. Each
model covers a 10 MHz tuning
range.

TYPICAL RESPONSE CURVES

SPECIFICATIONS - TPCP-1414, 1514, 1614, 1714
0
Frequency range 1414 140-150 MHz
Attenuation (dB)

10
20
1514 150-160 MHz 30
1614 160-170 MHz 40
50
1714 170-180 MHz 60
70
Bandpass (typ) 2 MHz 80
Attenuation at +/- 5 MHz 45 dB 142.5 155.0 167.5

Insertion loss (typ) 1.5 dB Frequency (MHz)

Power input (max) 50 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 4 / 1”
Connectors BNC female, N female (opt)
Dimensions (HWD) in. (cm) 1.25 x 4 x 5 (3.2 x 10.2 x 12.7)
Mounting Flat surface
Finish Black enamel
Net weight lb. (kg) 1 (0.45)
Appearance of current production models
Shipping weight lb. (kg) 2 (0.9) may vary from picture.

All specifications subject

50 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2015 Rev. 10/13
 148 - 174 MHz

TPCP-1542C / TPCP-1543C
COMPACT VHF PRESELECTORS
2

MULTICOUPLERS
TPCP-1542C TPCP-1543C

The TPCP-1542C and TPCP-1543C

offer high performance in a compact
design for the 148-174 MHz VHF
band.
Cus tom-extruded 4-inch square
cavities allow horizontal mounting Attenuation (dB)
TPCP-1542C
on a standard 19-inch rack, with rack
height of 5.25”. The TPCP-1542C 155.0 160.0 165.0
uses two cavities to provide typical TYPICAL RESPONSE CURVES
attenuation of bet ter than 50 dB
at +/- 5 MHz, and insertion loss of
1.0 dB or less. The TPCP-1543C
uses three cavities, and provides
typical attenuation of better than
70 dB, and insertion loss of 1.5 dB
or less.
TPCP-1543C
155.0 160.0 165.0
Frequency (MHz)
SPECIFICATIONS TPCP-1542C TPCP-1543C
Frequency range 148-174 MHz
Bandpass (typ) 700 KHz 1.5 MHz
Attenuation at +/- 5 MHz 50 dB (min) 70 dB (min)
Insertion loss (typ) 1.0 dB 2.0 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 2 / 4” 3 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) 5.25 x 19 x 14 (38.7 x 48.3 x 35.6)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 11 (5) 14 (6.4)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 51
TWDS-2028 Rev. 10/12
 148 - 174 MHz

TPCP-1544C / TPCP-1544CM
COMPACT VHF PRESELECTOR

The TPCP-1544C/CM offers high

performance in a compact design
for the 148-174 MHz VHF band. The
TPCP-1544C provides a bandpass
of 2 MHz or less, with typical
isolation of better than 50 dB at
+/- 5 MHz, and insertion loss of 1.5
dB or less.
A custom extruded 4” square cavity
allows horizontal mounting on a
standard 19” rack, with rack height
of 5.25" (C) and 4" (CM). The “C” TPCP-1544C
model mounts in a 19” EIA rack, and
the “CM” has adjustable mounting
tabs for installation in a cabinet. TYPICAL RESPONSE CURVES

0
10
Attenuation (dB)

20
30
40
50
60
70

TPCP-1544CM 155.0 160.0 165.0

Frequency (MHz)

SPECIFICATIONS - TPCP-1544C / CM
Frequency range 148-174 MHz
Bandpass (max) 2 MHz
Attenuation at +/- 5 MHz Fc (min) 50 dB
Insertion loss (typ) 1.5 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 4 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) C 5.25 x 19 x 15 (13.3 x 48.3 x 38.1)
(Tuners fully extended) CM 4 x 19 x 15 (10.2 x 48.3 x 38.1)
Mounting C 19” rack mount
CM 19” cabinet mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 18.25 (8.3)

All specifications subject

52 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2005 Rev. 10/12
 148 - 174 MHz

TPCP-1546C
COMPACT VHF PRESELECTOR
2
The TPCP-1546C of fers high

MULTICOUPLERS
performance in a compact design
for the 148-174 MHz VHF band.
Six square, pass-reject cavities
provide greater than 8 0 dB
at tenuation at +/- 5 MHz, with a
bandpass of 2.2 MHz or less, and
insertion loss of 2.5 dB or less.
The custom-extruded 4-inch cavities
allow horizontal rack mounting on a
standard 19" rack, with rack height
of only 8.75".

TYPICAL RESPONSE CURVES

0
10
Attenuation (dB)

20
30
40
50
60
70
80

155.0 160.0 165.0

Frequency (MHz)

SPECIFICATIONS - TPCP-1546C
Frequency range 148-174 MHz
Bandpass (max) 2.2 MHz
Attenuation at +/- 5 MHz 80 dB
Insertion loss (typ) 2.5 dB
Power input (max) 350 watts
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
Number of cavities / size 6 / 4”
Connectors N Female, UHF (opt.)
Dimensions (HWD) in. (cm) 8.75 x 19 x 15
(Tuners fully extended) (22.2 x 48.3 x 38.1)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Weight lb. (kg) 36.5 (16.6)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 53
TWDS-2006 Rev. 10/12
 148 - 174 MHz

TPCP-1554, -1556
BANDPASS PRESELECTOR

Telewave TPCP-1554 and TPCP- All units are factory tuned to TYPICAL FILTER RESPONSE CURVES
1556 preselectors are specially customer-supplied frequencies
designed for use with master and no further adjustment should 0
TPCP-1554
receive systems to insure rejection be necessary. Field re-tuning or
10
of external noise sources. These adjustment of insertion loss can be
20
bandpass preselectors provide accomplished quickly if needed.

Attenuation (dB)
30
optimum receiver desense
40
protection when installed between
50
a receiver multicoupler and the
60
antenna. In addition, their high
70
power capability allows these
80
units to be used as sideband filters
on the outputs of transmitters or -3 -2 -1 Fo +1 +2 +3

Frequency (MHz)
transmitter combiners.
Bandpass preselectors reject all
signals outside a selected pass TPCP-1556
0
window, and are often preferred
10
at congested sites. TPCP-1554

Attenuation (dB)
20

These bandpass filters consist of 30

4 or 6 series-connected cavities, 40

and are available in a wide range 50

of pass bandwidths. Each model 60

features “sharp-skirt” selectivity 70

with minimum insertion loss. For 80

optimum per formance, these

-6 -4 -2 Fo +2 +4 +6
bandpass filters are custom tailored Frequency (MHz)
to meet individual requirements.
Multiple-window configurations TPCP-1556
can be provided when more than SPECIFICATIONS TPCP-1554 TPCP-1556
one pass band is required.
Frequency range 148-174 MHz
Heavy duty materials are used Bandpass (typ) 700 KHz or less 1.3 MHz or less
throughout these bandpass filters Attenuation at +/- 5 MHz 40 dB 80 dB
to insure top performance and Insertion loss (typ) 1.5 dB 2.0 dB
long life, and RG214 Mil-Spec
Power input (max) 350 watts
cable is used for interconnections.
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature stability is maintained
from -30 to +70°C by the use of Temperature range -30°C to +70°C
temperature compensators, and Number of cavities / size 4 / 5” 6 / 5”
threaded invar rod. Tuners are Connectors N Female, UHF (opt.)
silver plated and sliding contacts Dimensions (HWD) in. (cm) 28 x 19 x 10.5 (71.1 x 48.3 x 26.7)
are made with beryllium copper Mounting 19” rack mount
fingerstock. All models are 19” Finish Alodine / Gray acrylic enamel
rack-mountable, and come with N Net weight lb. (kg) 20 (9.1) 29 (13.2)
Female connectors.
Shipping weight lb. (kg) 23 (10.4) 32 (14.5)

All specifications subject

54 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2018 Rev. 10/12
 200 - 300 MHz

TPCP-2244, -2246
BANDPASS PRESELECTORS
2
Telewave TPCP-2244 and TPCP- All units are factory tuned to TYPICAL FILTER RESPONSE

MULTICOUPLERS
2246 preselectors are specially customer-supplied frequencies TPCP-2244
0
designed for use with master and no further adjustment should
receive systems to insure rejection be necessary. Field retuning or 10

of external noise sources. These adjustment of insertion loss can be 20

bandpass preselectors provide accomplished quickly if needed.

Attenuation (dB)
30
optimum receiver desense
protection when installed between 40

a receiver multicoupler and the 50

antenna. In addition, their high
60
power capability allows these
units to be used as sideband filters 70

on the outputs of transmitters or TPCP-2244 80

transmitter combiners.
247.5 249.5 251.5 253.5 255.5 257.5 259.5
Bandpass preselectors reject all Frequency (MHz)
signals outside a selected pass
window, and are often preferred
at congested sites.
These bandpass filters consist of
4 or 6 series-connected cavities,
and are available in a wide range
of pass bandwidths. Each model
features “sharp-skirt” selectivity TPCP-2246
with minimum insertion loss. For
optimum per formance, these
bandpass filters are custom tailored
to meet individual requirements.
Multiple-window configurations
SPECIFICATIONS TPCP-2244 TPCP-2246
can be provided when more than
one pass band is required. Frequency range 200-300 MHz
Bandpass (typ) 2 MHz or less 4 MHz or less
Heavy duty materials are used
Attenuation at +/- 5 MHz 50 dB 80 dB
throughout these bandpass filters
Insertion loss (typ) 1.5 dB 2.0 dB
to insure top performance and
long life, and RG214 Mil-Spec Power input (max) 350 watts
cable is used for interconnections. Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
Temperature stability is maintained Temperature range -30°C to +70°C
from -30 to +70°C by the use of Number of cavities / size 4 / 4” 6 / 4”
temperature compensators, and Connectors N Female, UHF (opt.)
threaded invar rod. Tuners are Dimensions (HWD) in. 5.25 x 19 x 12 10.5 x 19 x 12
silver plated and sliding contacts cm 13.3 x 48.3 x 30.5 26.7 x 48.3 x 30.5
are made with beryllium copper Mounting 19” rack mount
fingerstock. All models are 19” Finish Alodine / Gray acrylic enamel
rack-mountable, and come with N Net weight lb. (kg) 20 (9.1) 29 (13.2)
Female connectors.
Shipping weight lb. (kg) 23 (10.4) 32 (14.5)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 55
TWDS-2031 Rev. 10/12
 300 - 400 MHz

TPCP-3544, -3546, -3548

UHF BANDPASS PRESELECTOR

Telewave TPCP-3544, 3546, and All units are factory tuned to

3548 UHF Bandpass Preselectors customer-supplied frequencies
are specially designed for use with and no further adjustment should
master receive systems, to ensure be necessary. Field re-tuning or
rejection of external noise sources. adjustment of insertion loss can be
These bandpass preselec tors accomplished quickly if needed.
provide optimum receiver desense
protection when installed between
the receiver multicoupler and the TPCP-3546
antenna. Their high power capability
also allows these units to be used
as sideband filters on the outputs
of transmitters or transmitter
combiners. TYPICAL FILTER RESPONSE CURVES
0 0
Bandpass preselectors reject all TPCP-3544
TPCP-3546
signals outside a selected pass 10 2 TPCP-3548

window, and are often preferred 20 4

Attenuation (dB)

at congested sites.
30 6
These bandpass filters consist of 4,
40 8
6, or 8 series-connected cavities,
50 10
and are available in a wide range
of pass bandwidths. Each model
4
54

60 12
-3
CP
TP

features “sharp-skirt” selectivity 70 14

46

548
-35

with minimum insertion loss. For

P-3
CP

TPC
TP

optimum per formance, these -8 -6 -4 -2 Fo +2 +4 +6 +8 -4 -3 -2 -1 Fo +1 +2 +3 +4

bandpass filters are custom tailored Frequency (MHz)

to meet individual requirements.
Multiple-window configurations
can be provided when more than SPECIFICATIONS TPCP-3544 TPCP-3546 TPCP-3548
one pass band is required. Frequency range 300-400 MHz
Heavy duty materials are used Bandpass (typ) 2 MHz 4 MHz 4 MHz
throughout the bandpass filters Attenuation (+/- 5 MHz) 50 dB 55 dB 80 dB
to insure top performance and Insertion loss (typ) 1.5 dB 2.0 dB 3.0 dB
long life, and RG-214 Mil-Spec Power input (max) 350 watts
cable is used for interconnections. Impedance / VSWR (max) 50 ohms / 1.5:1
Temperature stability is maintained Temperature range -30°C to +70°C
from -30 to +70°C by the use of
Number of cavities 4 / 4” 6 / 4” 8 / 4”
temperature compensators, and
Connectors N Female, UHF (opt.)
threaded invar rod. Tuners are
silver plated and sliding contacts Dimensions (HWD) in. 5.25x19 x15 7 x19 x15 8.75x19x15
cm 13 x 48 x 38 18 x 48 x 38 22 x 48 x 38
are made with beryllium copper
Mounting 19” rack mount
fingerstock. All models are 19”
rack-mountable, and come with N Finish Alodine / Gray acrylic enamel
Female connectors. Net weight lb. (kg) 12 (5.5) 19 (8.6) 24 (10.9)
Shipping weight lb. (kg) 16 (7.3) 28 (12.7) 33 (15)

All specifications subject

56 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2007 Rev. 10/12
 400 - 512 MHz

TPCP-4542
BANDPASS PRESELECTOR
2
The Telewave TPCP-4542 UHF

MULTICOUPLERS
receiver preselector is specially
designed for use in master antenna
receive systems, to insure rejection
of external noise sources. This
bandpass preselector provides
optimum protection against desense
and adjacent channel interference
when installed between the receiver
multicoupler and antenna. High
power capability also allows these TPCP-4542 TWPC-4504-2
units to be used as sideband filters 459 MHz at 2.0 dB IL Cavity Response
0 0
on the outputs of transmitters or
transmitter combiners. 10 10
0.5 dB

Bandpass preselectors reject all 20 20 0.75 dB

Attenuation (dB)

signals outside a selected pass 30 30

1.0 dB
window, and are often preferred
40 40
at congested sites.
2.0 dB
50 50
Heavy-duty materials are used
throughout this bandpass filter to 60 60 4.0 dB

insure top performance and long

70 70
service. RG-214 Mil-Spec cable
is used for the interconnect, and 80 80

temperature stability is maintained

453 455 457 459 461 463 465 -6 -4 -2 Fo +2 +4 +6
by the use of a threaded invar tuning Frequency (MHz)
rod. Tuners are all silver-plated, and
sliding contacts are manufactured
from beryllium copper fingerstock.
This unit is 19" rack mounted, and SPECIFICATIONS - TPCP-4542
comes with N Female connectors
Frequency range 400-512 MHz
standard.
Bandpass (max) 1 MHz or less
All units are factory tuned to Attenuation at +/- 5 MHz 35 dB
customer-supplied frequencies Insertion loss (typ) 1.0 dB
and no further adjustment should
Power input (max) 350 watts
be necessary. Field re-tuning or
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
adjustment of insertion loss can be
accomplished quickly if needed. Temperature range -30°C to +70°C
Number of cavities / size 2 / 4”
Connectors N Female
Dimensions (HWD) in. (cm) 5.25 x 19 x 10.5 (13.3 x 48.3 x 26.5)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Net weight lb. (kg) 5 (2.3)
Shipping weight lb. (kg) 8 (3.6)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 57
TWDS-2019 Rev. 10/12
 400 - 512 MHz

TPCP-4544, -4546, -4548

UHF BANDPASS PRESELECTOR

Telewave TPCP-4544, 4546, and All units are factory tuned to

4548 UHF Bandpass Preselectors customer-supplied frequencies
are specially designed for use with and no further adjustment should
master receive systems, to ensure be necessary. Field re-tuning or
rejection of external noise sources. adjustment of insertion loss can be
These bandpass preselec tors accomplished quickly if needed.
provide optimum receiver desense
protection when installed between
the receiver multicoupler and the TPCP-4546
antenna. Their high power capability
also allows these units to be used
as sideband filters on the outputs
of transmitters or transmitter
combiners. TYPICAL FILTER RESPONSE CURVES
0 0
Bandpass preselectors reject all TPCP-4544
TPCP-4546
signals outside a selected pass 10 2 TPCP-4548

window, and are often preferred 20 4

Attenuation (dB)

at congested sites.
30 6
These bandpass filters consist of 4,
40 8
6, or 8 series-connected cavities,
50 10
and are available in a wide range
of pass bandwidths. Each model
4
54

60 12
-4
CP
TP

features “sharp-skirt” selectivity 70 14

46

548
-45

with minimum insertion loss. For

P-4
CP

TPC
TP

optimum per formance, these -8 -6 -4 -2 Fo +2 +4 +6 +8 -4 -3 -2 -1 Fo +1 +2 +3 +4

bandpass filters are custom tailored Frequency (MHz)

to meet individual requirements.
Multiple-window configurations
can be provided when more than SPECIFICATIONS TPCP-4544 TPCP-4546 TPCP-4548
one pass band is required. Frequency range 400-512 MHz
Heavy duty materials are used Bandpass (typ) 2 MHz 4 MHz 4 MHz
throughout the bandpass filters Attenuation (+/- 5 MHz) 50 dB 55 dB 80 dB
to insure top performance and Insertion loss (typ) 1.5 dB 2.0 dB 3.0 dB
long life, and RG-214 Mil-Spec Power input (max) 350 watts
cable is used for interconnections. Impedance / VSWR (max) 50 ohms / 1.5:1
Temperature stability is maintained Temperature range -30°C to +70°C
from -30 to +70°C by the use of
Number of cavities / size 4 / 4” 6 / 4” 8 / 4”
temperature compensators, and
Connectors N Female, UHF (opt.)
threaded invar rod. Tuners are
silver plated and sliding contacts Dimensions (HWD) in. 5.25x19 x10.5 7 x19 x10.5 8.75x19x10.5
cm 13 x 48 x 27 18 x 48 x 27 22 x 48 x 27
are made with beryllium copper
Mounting 19” rack mount
fingerstock. All models are 19”
rack-mountable, and come with N Finish Alodine / Gray acrylic enamel
Female connectors. Net weight lb. (kg) 10 (4.5) 16 (7.3) 20 (9.1)
Shipping weight lb. (kg) 14 (6.4) 24 (11) 28 (12.7)

All specifications subject

58 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2023 Rev. 10/12
 450 - 470 MHz
TPCP-45215 455-460 MHz

TPCP-45215 / 46215 / 45215-2

UHF COMBLINE PRESELECTORS
TPCP-46215 465-470 MHz
TPCP-45215-2 455-470 MHz 2
Telewave TPCP-45215/46215 single

MULTICOUPLERS
and TPCP-45215-2 dual window
combline preselectors are specially
designed for use with master receive
systems, to optimize performance
on UHF repeater fre quen cies,
and provide excellent rejection
of external noise sources. These
combline filters provide maximum
protection from receiver desense
when installed between the receiver
multicoupler and the antenna.
The 45215 and 46215 combline TPCP-45215, 46215 TPCP-45215-2
filters have a bandpass of 4 MHz, Single Window Combline Dual Window Combline Preselector
0
and consist of a series of resonators 0
Attenuation (dB)

10
in a compact enclosure, mounted 20 10

on a standard 5.25” x 19” panel. 30

40 20
The 45215-2 provides two 4 MHz 50
60

Attenuation (dB)
30
windows on a 10.5” x 19” panel. These 70
80
units feature “sharp-skirt” selectivity 40
462.50 467.50 472.50
with minimum insertion loss in single Frequency (MHz) 50
or dual configuration. All units are
pre-tuned to customer-specified 60

frequencies before shipment to 70

TYPICAL FILTER RESPONSE CURVES
provide optimum performance, and
80
no further adjustment should be
necessary. 447.50 462.50 477.50
Frequency (MHz)
Telewave combline filters offer
the ultimate in repeater system
SPECIFICATIONS TPCP-45125 TPCP-46215 TPCP-45215-2
per formance, ma ximizing
Configuration SINGLE WINDOW DUAL WINDOW
coverage and providing protection
against receiver desensitization Frequency range (MHz) 455-460 465-470 455-460/465-470
at congested sites. With new Bandpass (typ) 2 MHz 4 MHz 4 + 4 MHz
narrowband channel assignments, Attenuation (typ) > 35 dB at +/- 3MHz from Fc
proper filtering is even more Insertion loss (typ) 2.0 dB
critical. The TPCP-45215 series Impedance / VSWR (max) 50 ohms / 1.5:1
allows operators of high-density Temperature range -30°C to +70°C
UHF systems to take advantage of
Connectors N Female
new technology, and enhance the
Dimensions (HWD) in. 5.25 x 19 x 10 10.5 x 19 x 10
performance of existing systems. cm 13.3 x 48.3 x 25.4 26.7 x 48.3 x 25.4
Mounting 19” rack mount
Finish Clear alodine / black paint
Net weight lb. (kg) 12 (5.5) 24 (10.9 )
Shipping weight lb. (kg) 14 (6.4) 29 (13.2)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 59
TWDS-2001 Rev. 10/12
 450 - 470 MHz

TPCP-4514
COMPACT UHF PRESELECTOR

The TPCP-4514 is an ultra-compact,

4-cavity preselector for the UHF
band from 450-470 MHz. This
preselector produces a minimum
of 30 dB attenuation, and is ideal
for limited space applications,
including portable repeaters and
mobile installations.
Simple mounting to any flat surface
allows maximum flexibility. The
TPCP-4514 covers a 20 MHz tuning
range.

TYPICAL RESPONSE CURVES

SPECIFICATIONS - TPCP-4514
0
Frequency range 450-470 MHz
Attenuation (dB)

10
Bandpass (typ) 4 MHz 20
30
Attenuation at +/- 10 MHz 30 dB 40
50
Insertion loss (typ) 2.0 dB 60
Power input (max) 50 watts 70
80
Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
450 460 470
Temperature range -30°C to +70°C Frequency (MHz)
Number of cavities / size 4 / 1”
Connectors N female, BNC female (opt)
Dimensions (HWD) in. (cm) max 1.1 x 4.9 x 4 (2.8 x 12.4 x 10.2)
(including connectors, tuners and
mounting tabs
Mounting Flat surface
Finish Black enamel
Net weight lb. (kg) 1 (0.45)
Shipping weight lb. (kg) 2 (0.9)
Appearance of current production models
may vary from picture.

All specifications subject

60 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2008 Rev. 10/13
 806 - 960 MHz

TPCP-8642, TPCP-8644
BANDPASS PRESELECTORS
2
Telewave TPCP-8642 and 8644 fingerstock. All models are 19”

MULTICOUPLERS
TYPICAL RESPONSE CURVES
Bandpass Preselectors are specially rack-mountable, and come with N
designed for use with 800 MHz Female connectors. Preselector TPCP-8642
0

receiver systems to insure rejection 10

of external noise sources. These

Attenuation (dB)
20
bandpass preselectors provide 30
optimum receiver desense
40
protection when installed between
50
the receiver multicoupler and the
60
antenna. Their high power capability
allows these units to be used as TPCP-8642
70

sideband filters on the outputs -15 -10 -5 Fo +5 +10 +15

of transmitters or transmitter Frequency (MHz)

combiners.
Bandpass preselectors reject all
signals outside a selected pass Preselector TPCP-8644
0
window, and are often preferred
at congested sites. 10

Attenuation (dB)
20
These bandpass filters are available
30
with up to a 5 MHz pass bandwidth,
and they consist of 2 or 4 series- 40

connected cavities. Each model 50

TPCP-8644
features “sharp-skirt” selectivity 60

with minimum insertion loss. For 70

optimum per formance, these -30 -20 -10 Fo +10 +20 +30
bandpass filters are custom tailored Frequency (MHz)
to meet individual requirements.
Multiple-window configurations SPECIFICATIONS TPCP-8642 TPCP-8644
can be provided when more than Frequency range 806-960 MHz
one pass band is required. All units Bandpass (typ) 2 MHz or less 5 MHz or less
are factory tuned to customer- Attenuation (+/- 45 from Fc) 90 dB
supplied frequencies and no further Insertion loss (typ) 0.5 dB 1.0 dB
adjustment should be necessary. Power input (max) 350 watts
Heavy duty materials are used Impedance / VSWR (max) 50 ohms / 1.5:1
throughout these bandpass filters Temperature range -30°C to +70°C
to insure top performance and Number of cavities / size 2 / 4” 4 / 4”
long life, and only RG214 Mil-Spec Connectors N Female
cable is used for interconnections.
Dimensions (HWD) in. 5.25 x 19 x 10.5 5.25 x 19 x 10.5
Temperature stability is maintained
cm 13.3 x 48.3 x 26.7 13.3 x 48.3 x 26.7
from -30 to +70°C by the use of
temperature compensators, and Mounting 19” rack mount
threaded invar rod. Tuners are Finish Alodine / Gray acrylic enamel
silver plated and sliding contacts Net weight lb. (kg) 8 (3.6) 10 (4.5)
are made with beryllium copper Shipping weight lb. (kg) 12 (5.5) 14 (6.4)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 61
TWDS-2025 Rev. 10/12
 806 - 960 MHz

TTPP-8642
BANDPASS / BANDREJECT PRESELECTOR

The Telewave Model TTPP-8642

Bandpass-Bandreject Preselector
is designed for use with master
receive systems to insure rejection
of external noise sources. The
TTPP-8642 utilizes an exclusive
“side-by-side” coupling technique
which produces a 5 MHz bandpass,
and a reject characteristic at 45
MHz above the passband.
This provides optimum receiver
protection when installed between TYPICAL RESPONSE CURVE
a receiver multicoupler and the 0

antenna. High power capability 10

also allows these units to be used

20
as sideband filters on the outputs
Attenuation (dB)

30
of transmitters or transmitter
combiners. 40

These filters cover a 5 MHz pass 50

bandwidth, and they consist of 2 60

series-connected cavities. They
70
feature “sharp-skirt” selectivity
with minimum insertion loss. All -10 Fo +10 +20 +30 +40 +50

units are factory tuned to customer- Frequency (MHz)

supplied frequencies and no further
adjustment should be necessary.
Heavy duty materials are used
throughout these bandpass filters
to insure top performance and SPECIFICATIONS - TTPP-8642
long life, and Mil-Spec semi-rigid Frequency range 806-960 MHz
cable is used for interconnections. Bandpass (max) 5 MHz or less
Temperature stability is maintained Attenuation (+45 from Fo) 90 dB
from -30 to +70°C by the use of Insertion loss (typ) 0.5 dB
temperature compensators, and Power input (max) 350 watts
threaded invar rod. Tuners are Impedance (nom) / VSWR (max) 50 ohms / 1.5:1
silver plated and sliding contacts
Temperature range -30°C to +70°C
are made with beryllium copper
Number of cavities / size 2 / 4”
fingerstock. All models are 19”
rack-mountable, and come with N Connectors N Female
Female connectors. Dimensions (HWD) in. (cm) 5.25 x 19 x 10.5 (13.3 x 48.3 x 26.5)
Mounting 19” rack mount
Finish Alodine / Gray acrylic enamel
Net weight lb. (kg) 8 (3.6)
Shipping weight lb. (kg) 12 (5.5)

All specifications subject

62 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-2012 Rev. 10/12
 806 - 890 MHz
TPCP-8626 806-821 MHz

TPCP-8626, TPCF-8926
COMBLINE PRESELECTORS
TPCP-8626B 824-849 MHz
TPCF-8926 870-890 MHz
TPCF-8926B 870-890 MHz
2
The TPCP-8626 and TPCF-8926

MULTICOUPLERS
Combline Preselector filters are
specially designed for use in 800
MHz master receive systems,
allowing system designers to
accommodate multiple systems
while ensuring rejection of external
noise sources. These preselectors
and sideband filters provide
maximum desense protection for TPCP-8626
receiver front ends when installed
bet ween the multicoupler or
transmitter and antenna.
Combline filters feature "sharp
skirt" selectivity with very low
insertion loss (see below). Each TYPICAL FILTER RESPONSE
filter is factory tuned and tested TPCP-8626 TPCF-8926
on customer supplied frequencies 0 0

prior to shipment. The 8626/8926 10 10

filter series is available with pass

Attenuation (dB)

20 20

bandwidths of 10, 15, and 20 MHz, 30 30

and each unit consists of a series 40 40

of 6 resonators in a compact 13" x 50 50

2" x 4.5" package. These filters are 60 60

typically supplied on a 19" panel for 70 70

rack mounting, and other options

-30 -20 -10 Fo +10 +20 +30 -15 -10 -5 Fo +5 +10 +15
are available on request. Frequency (MHz)

SPECIFICATIONS TPCP-8626 TPCP-8626B TPCF-8926 TPCF-8926B

Frequency range (MHz) 806-821 MHz 824-849 MHz 870-890 MHz 870-890 MHz
Bandpass (typ) 15 MHz 10 MHz 20 MHz 10 MHz
Attenuation (+/- 45 from Fc) 85 dB
Insertion loss (typ) 0.35 dB
Power input (max) N/A N/A 500 watts 500 watts
Impedance / VSWR (max) 50 ohms / 1.25:1
Temperature range -30 to +60°C
Number of cavities 6
Connectors N Female
Dimensions (HWD) in (cm) 3.5 x 19 x 5 (8.9 x 48.3 x 12.7)
Mounting 19” rack mount
Finish Clear alodine
Net weight lb. (kg) 4 (1.8)
Shipping weight lb. (kg) 8 (3.6)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 63
TWDS-2024 Rev. 10/12
3 POWER MONITORING
 3 POWER MONITORING

Broadband Wattmeters
Telewave Broadband Wattmeters are known worldwide for
quality, durability, and convenience. A single meter covers
2-200 MHz or 20-1000 MHz and 1-500 watts with no plug-
in elements or band switching.

Power Monitors
RF power monitors produce a calibrated DC voltage
proportional to an RF signal between 30 and 960 MHz.
They are available as single and dual-direction devices with
very low insertion loss.

Alarm Panels
Power monitoring and alarm panels continuously monitor
the output of up to 12 transmitters and 2 antennas.
Multiple measurements are switch selectable including
VSWR and FWD/REV power. Relay contact closures
indicate out of range conditions.
 2 - 200 MHz

MODEL 44L1, L1P

BROADBAND RF WATTMETER

FEATURES
• REQUIRES NO ELEMENTS
OR "SLUGS"
• NO BAND SWITCHING
• MEASURES 1 TO 500 WATTS
• 5 POWER RANGES
• 5 WATT FULL SCALE RANGE
• COVERS 2 - 200 MHz
• MEASURES FORWARD AND
REFLECTED POWER
• -40 dB RF SAMPLING PORT
• SHOCK-MOUNTED METER
• LOW TEMPERATURE
OPERATION
• QUICK-CHANGE CONNECTORS
• LIGHT WEIGHT: 3 LBS

The Telewave Model 44L1/L1P RF

Wattmeter is a compact, versatile
instrument used for direc t
measurement of forward and
reflected RF power in a coaxial
transmission line under any load
conditions. Wide band capability
and dynamic range allows operation MODEL 44L1P
without elements, inser ts, or
bandswitching.
The 20 microamp taut-band meter
movement is shock mounted in a
rugged, diecast housing, making
this instrument ideal for mobile
radio installation in aircraft or
vehicles, as well as base stations.
Model 44L1P includes an RF
sampling port, with an output 40
dB below the total transmission line
level, for frequency measurement,
signal injec tion, or s pec tral
analysis.
BACK CARRY CASE (OPTIONAL)

All specifications subject

66 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3003 Rev. 9/12
 2 - 200 MHz

MODEL 44L1, L1P 3

This wideband instrument covers to drive the 20 µA taut band meter.

POWER MONITORING
2 to 200 MHz with a power range Forward and reflected power can
of 1 to 500 watts. The meter be directly measured by rotating
movement can be turned off for the F WD - RE V switch. VSWR
protection when not in use. A (Voltage Standing Wave Ratio) is
leather carrying strap is provided easily determined by comparing
for easy portability. The use of a these measurements and using the
taut-band meter movement allows convenient chart on the back of the
operation in cold temperatures. instrument.
The RF sample port on Model Five power scales are provided.
44L1P samples a low level of RF The 500 watt scale will test most
power as it passes through the high powered transmitters, while
instrument. This bi-directional port the 5 watt scale makes it simple to
is accessed via a BNC connector tune low powered portables. The
located on the side of the meter. excellent stability of this unit and
It allows injection of a signal into the ability to switch it from one
the device under test, or can be power range to another to check
used for spectrum analysis and the calibration eliminates the need
frequency measurements without for a secondary standard to verify
affecting operation of the meter. calibration.
The Model 44L1/L1P utilizes a set
of precision directional detectors
which sample forward and reverse
CW power flow in a specially
engineered section of transmission
line. The sampled current is scaled

SPECIFICATIONS
Frequency range 2-200 MHz
Full scale power ranges 5, 15, 50, 150 and 500 watts
Impedance, primary line 50 ohms nominal
VSWR (max) 1.1:1
Accuracy (at 80% of full scale) +/- 7% with N connectors only
RF sampling port (44L1P) -40 dB +/-2 dB below total power
(forward + reverse)
Connectors (input/output) N Female standard
(Quick-Change standard) UHF, DIN, TNC, BNC optional
Sample port BNC Female
Dimensions (HWD) in. 6.625 x 4 x 3.25
mm 168.3 x 101.6 x 82.6
Weight lbs (kg) 3 (1.36)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 67
TWDS-3003 Rev. 9/12
 20 - 1000 MHz

MODEL 44A, AP
BROADBAND RF WATTMETER

FEATURES
• REQUIRES NO ELEMENTS
OR "SLUGS"
• NO BAND SWITCHING
• MEASURES 1 TO 500 WATTS
• 5 POWER RANGES
• 5 WATT FULL SCALE RANGE
• COVERS 20 - 1000 MHz
• MEASURES FORWARD AND
REFLECTED POWER
• -40 dB RF SAMPLING PORT
• SHOCK-MOUNTED METER
• LOW TEMPERATURE
OPERATION
• QUICK-CHANGE CONNECTORS
• LIGHT WEIGHT: 3 LBS

The Telewave Model 44A/AP RF

Wattmeter is a compact, versatile
instrument used for direc t
measurement of forward and
reflected RF power in a coaxial
transmission line under any load
conditions. Wide band capability
and dynamic range allows operation MODEL 44AP
without elements, inser ts, or
bandswitching.
The 20 microamp taut-band meter
movement is shock mounted in a
rugged, diecast housing, making
this instrument ideal for mobile
radio installation in aircraft or
vehicles, as well as base stations.
Model 44AP includes an RF sampling
port, with an output 40 dB below
the total transmission line level, for
frequency measurement, signal
injection, or spectral analysis.

BACK CARRY CASE (OPTIONAL)

All specifications subject

68 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3002 Rev. 9/12
 20 - 1000 MHz

MODEL 44A, AP 3
This wideband instrument covers CW power flow in a specially

POWER MONITORING
20 to 1000 MHz with a power engineered section of transmission
range of 1 to 500 watts. The line. The sampled current is scaled
meter movement can be turned to drive the 20 µA taut band meter.
off for protection when not in use. Forward and reflected power can
A leather carrying strap is provided be directly measured by rotating
for easy portability. The use of a the F WD - RE V switch. VSWR
taut-band meter movement allows (Voltage Standing Wave Ratio) is
operation in cold temperatures. easily determined by comparing
these measurements and using the
The RF sample port on Model 44AP
convenient chart on the back of the
samples a low level of RF power as it
instrument.
passes through the instrument. This
bi-directional port is accessed via a Five power scales are provided.
BNC connector located on the side The 500 watt scale will test most
of the meter. It allows injection of a high powered transmitters, while
signal into the device under test, or the 5 watt scale makes it simple to
can be used for spectrum analysis tune low powered portables. The
and frequency measurements excellent stability of this unit and
without affecting operation of the the ability to switch it from one
meter. power range to another to check
the calibration eliminates the need
The Model 44A/AP utilizes a set
for a secondary standard to verify
of precision directional detectors
calibration.
which sample forward and reverse

SPECIFICATIONS
Frequency range 20-1000 MHz
Full scale power ranges 5, 15, 50, 150 and 500 watts
Impedance, primary line 50 ohms nominal
VSWR (max) 1.1:1
RF sampling port (44AP) -40 dB +/-2 dB below total power
(forward + reverse)
Connectors (input/output) N Female standard
(Quick-Change standard) UHF, DIN, TNC, BNC optional
Sample port BNC-female
Dimensions (HWD) in. 6.625 x 4 x 3.25
mm 168.3 x 101.6 x 82.6
Weight lbs (kg) 3 (1.36)

METER ACCURACY
+/-6% Type N connectors +/-6%
with (UHF connectors not specified)
correction

20 150 1000
MHz MHz MHz

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 69
TWDS-3002 Rev. 9/12
 30 - 960 MHz

RF POWER MONITORS
PM-1A, PM-2A SERIES

Telewave RF Power Monitors are band. One or two RCA connectors

single or dual-direction devices provide access to the proportional
which produce a DC voltage DC output, which is coupled to the
proportional to an RF signal between meter panel with a simple shielded
30 and 960 MHz, depending on audio-type cable.
model. These devices exhibit
Standard RF connectors are N
extremely low insertion loss, and
Female. Any combination of N,
are designed to be placed in the PM-1A
SMA, or UHF, Male or Female are
transmission line permanently,
available on request.
allowing continuous monitoring of
forward and reflected power.
Each power monitor is used for Note: Center frequency or desired
band coverage must be specified
one transmitter within a specified
with order.
bandwidth. Voltage trimmers allow
each unit to be quickly recalibrated
for a new frequency within the same

MODEL TYPE FREQUENCY BANDWIDTH* PM-2A

PM-1A-50 Single Direction 30-88 MHz 20 MHz
PM-1A-90 Single Direction 87.5-108 MHz 20 MHz
PM-1A-150 Single Direction 118-230 MHz 50 MHz
PM-1A-300 Single Direction 200-400 MHz 50 MHz
PM-1A-450 Single Direction 380-512 MHz 50 MHz
PM-1A-760 Single Direction 700-869 MHz 50 MHz
PM-1A-900 Single Direction 806-960 MHz 50 MHz
PM-2A-50 Dual Direction 30-88 MHz 20 MHz
PM-2A-90 Dual Direction 87.5-108 MHz 20 MHz
PM-2A-150 Dual Direction 118-230 MHz 50 MHz
PM-2A-300 Dual Direction 200-400 MHz 50 MHz
PM-2A-450 Dual Direction 380-512 MHz 50 MHz
PM-2A-760 Dual Direction 700-869 MHz 50 MHz
PM-2A-900 Dual Direction 806-960 MHz 50 MHz
SPECIFICATIONS
Input power range 5-1000 watts
Impedance (typ.) 50 ohms
VSWR (max) 1.1:1
Insertion loss (typ) 0.1 dB
Dimensions (HWD) in. (cm) 1.375 x 2.25 x 1.25 (3.5 x 5.7 x 3.2)
Weight lb. (kg) 0.5 (0.2)
RF connectors Any combination of N, SMA, or UHF *Bandwidth is the approximate
Male/Female (specify types) maximum range over which a useful
range of voltages are available without
DC connectors RCA-F standard, BNC-F or SMA (optional) retuning.
All specifications subject
70 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3015 Rev. 10/11
 30 - 960 MHz

PM1C1S
RF POWER MONITOR / ALARM PANEL
3
The Telewave PM1C1S is a single-

POWER MONITORING
channel, single antenna automatic
alarm panel for low transmit power
and high VSWR, featuring "true
VSWR" circuitry and a built-in power
monitor. The 2RU panel (3.5” x 19”)
mounts in any standard rack or
inside most base station cabinets,
and can be powered directly from
120 VAC or 12 VDC.
Whenever a low transmitter power
condition is sensed by the PM1C1S,
a latched relay closure occurs
and a red light on the front panel
turns on. Both normally-open and
normally-closed relay contacts are
provided.
A high VSWR condition is indicated
by a second latched relay and light.
These contacts can be used to
remotely activate light, speakers, FREQUENCY RANGE BANDWIDTH
or other alarm systems. The relays 30-88 MHz 20 MHz
and lights are reset by means of a 87.5-108 MHz 20 MHz
front panel RESET button. 118-512 MHz 50 MHz
The panel also operates as an inline 760-960 MHz 40 MHz
power monitor, measuring both The frequency range is determined by the integrated power monitor.
forward and reverse RF power, with Bandwidth is the approximate maximum range over which a useful range
readings displayed on a 3.5-inch of voltages are available without retuning.
meter. A PM-2A power monitor for
the appropriate frequency band
is included, attached to the rear
panel. SPECIFICATIONS
The PM1C1S has 2 meter scale Power scales FWD 0-250 watts or 0-400 watts
options: 0-250 watts, or 0-400 REV 0-25 watts or 0-120 watts
wat t s. T he meter sc ale and VSWR alarm range 2.0:1 +25% / -10%
frequency band must be specified Low power alarm range 5 watts to full scale
with the order. Delay timing range 0.1 to 1 second
Relay contacts, closure N/O and N/C
Relay contacts, ratings 3A - AC or DC
Temperature range -20°C to +60°C
Power requirements 120 VAC / 4 W or +12 VDC / 2 W
Dimensions (HWD) in. (cm) 3.5 x 19 x 4 (8.9 x 48.3 x 10.2)
Weight lbs (kg) 3.5 (1.6)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 71
TWDS-3006 Rev. 8/09
 30 - 960 MHz

PM5C1S
RF POWER MONITOR / ALARM PANEL

The Telewave PM5C1S is an

automatic alarm panel featuring
“true VSWR” circuitry. With optional
PM-1A or PM-2A power monitors,
this panel monitors the power
output of up to 5 transmitters for
low power, and provides a high
VSWR alarm for one antenna. The
3RU (5.25” x 19”) panel mounts in
any standard rack or inside most The PM5C1S has 2 meter scale
base station cabinets, and can be options: 0-250 watts, or 0-400
powered directly from 120VAC or watts. The meter scale must be
12VDC. specified with the order.
Whenever a low transmitter power
condition is sensed by the PM5C1S
on one of the five channels, a
latched relay closure occurs for the
appropriate channel and a red light
turns on at the front of the panel.
Normally open and normally-closed
relay contacts are provided for each FREQUENCY RANGE BANDWIDTH
individual channel. 30-88 MHz 20 MHz
87.5-108 MHz 20 MHz
A high antenna VSWR condition is
accurately sensed at all power levels 118-512 MHz 50 MHz
and indicated by a sixth latched 760-960 MHz 40 MHz
relay and light. These contacts can The frequency range is determined by the associated power monitors.
be used to remotely activate lights, Bandwidth is the approximate maximum range over which a useful range
speakers, or other alarm systems. of voltages are available without retuning.
The relays and lights are reset by
means of a front panel RESET
button or by momentarily grounding
the RESET input connection located
SPECIFICATIONS
on the rear of the unit.
Power scales FWD 0-250 watts or 0-400 watts
The panel also operates as an inline REV 0-25 watts or 0-120 watts
power monitor, measuring both VSWR alarm range 2.0:1 +25% / -10%
forward and reverse RF power of
Low power alarm range 5 watts to full scale
up to five transmitters plus a sixth
Delay timing range 0.1 to 1 second
channel for single antenna VSWR,
with all readings displayed on a Relay contacts, closure N/O and N/C
3.5-inch meter. Up to 6 power Relay contacts, ratings 3A - AC or DC
monitors (not included) for the Temperature range -20°C to +60°C
appropriate frequency band are Power requirements 120 VAC / 8 W or +12 VDC / 3.5 W
required. Dimensions (HWD) in. (cm) 5.25 x 19 x 3.25 (13.3 x 48.3 x 8.3)
Weight lbs (kg) 4 (1.8)

All specifications subject

72 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3007 Rev. 6/13
 30 - 960 MHz

PM10C2S1C
RF POWER MONITOR PANEL
3
The Telewave PM10C2S1C is a 1RU,

POWER MONITORING
compact RF power monitor panel,
capable of monitoring up to ten
transmitters and two antennas with
optional PM-1A or PM-2A power
monitors. This unit fits in 1.75” x 19”,
preserving valuable rack space for
other equipment.
The PM10C2S1C greatly simplifies
procedures for monitoring the
output of transmitters, and the
condition of transmission lines and
antennas. Ten remote transmitter
keying switches are provided, and
a simple two wire hook-up (RF
shielded or twisted pair) from the
keying circuit of each transmitter
to the screw terminals located on
the rear of the wattmeter panel
completes the connections. A
floating ground required by certain
transmitters is provided for each
keyer.
VSWR calculations can be made
when appropriate dual-direction FREQUENCY RANGE BANDWIDTH
power monitors are installed. The 30-88 MHz 20 MHz
FWD / REV switch on the front 87.5-108 MHz 20 MHz
panel quickly displays forward and 118-512 MHz 50 MHz
reflected power for the transmitter 760-960 MHz 40 MHz
or antenna circuits. Up to 10 power
The frequency range is determined by the associated power monitors.
monitors (not included) for the Bandwidth is the approximate maximum range over which a useful range
appropriate frequency band(s) are of voltages are available without retuning.
required.
The power monitor panel is not
frequency dependent, and power
monitors for multiple bands can be
SPECIFICATIONS
used with a single panel. No power
Power scales FWD 0-400 watts
supply is required for the meter
panel. REV 0-120 watts
Monitor inputs 12 FWD, 12 REV
Input connectors RCA-Female
Temperature range -20°C to +60°C
Dimensions (HWD) in. (cm) 1.75 x 19 x 5 (4.5 x 48.3 x 12.7)
Weight lbs (kg) 2 (0.9)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 73
TWDS-3016 Rev. 2/10
4 ISOLATORS AND LOADS
 4 ISOLATORS AND LOADS
Coaxial Loads
RF loads provide stable constant impedance termination
for receiver panels and transmitters up to 300 watts. Dry
loads can be operated in any position, and offer extremely
low VSWR and Quick-Change connectors.

Ferrite Isolators
Telewave isolators provide isolation between transmitters
by controlling the directional flow of RF energy. Power
which is coupled into an antenna system from a nearby
transmitter can be circulated into a load before it
contributes to intermodulation.

High Power Isolators

High power isolators handle up to 400 watts of power. These
rugged devices are custom-built for each application and
extensively tested in the Telewave manufacturing plant.

Intermodulation Suppression
IM Panels are self-contained devices which generally
include a single or dual isolator, low-pass filter, and output
termination load. Each panel is designed to provide
plug-and-play installation and can solve many difficult
interference problems.
 0 - 2500 MHz
TWL-01 100 mW 0-2500 MHz
TWL-35 35 W 0-1000 MHz
TWL-01, 35, 60 TWL-60 60 W 0-1000 MHz

COAXIAL RF TERMINATIONS

Telewave compact coaxial loads FEATURES

offer extremely low VSWR. All
• EXTREMELY LOW VSWR
loads are machined to withstand
any bench or field use, and their • CW POWER RATINGS
power rating provides substantial TO 60 WATTS
overload protection. Unlike oil- • DRY LOAD
filled loads, these dry coaxial loads • BROAD FREQUENCY RANGE
can be operated in any position.
• RUGGED CONSTRUCTION
Connectors have a silver-plated
center conductor, except TWL-01 • N, BNC, OR UHF MALE
CONNECTOR
which uses a gold-plated pin.
(Specify connector type) TWL-60
TWL-01 is designed as a port
termination for receiver splitters
w i t h N, SM A , U H F, o r BN C
female output s. T WL-35 and
TWL-60 feature recessed male
connectors for reduced size and
ease of use. Applications include
hybrids, isolators, power monitors,
wattmeters, and coaxial por t TWL-35
terminations.

TWL-01

SPECIFICATIONS TWL-01* TWL-35 TWL-60

Frequency range 0-2500 MHz 0-1000 MHz 0-1000 MHz
Maximum avg. CW power 250 mW 35 W 60 W
Max VSWR (N connector) 1.22:1 1.05:1 1.05:1
Impedance (nom.) 50 ohms (nominal)
Temperature rating 100% of rated power at 40°C • 50% of rated power at 95°C
50% overload rating 2 Minutes
Connectors N / SMA / UHF / BNC Male N or UHF Male N or UHF Male
Dimensions (dia. x H) in (cm) 0.8 x 0.97 (2.0 x 2.5) 1.6 x 1.4 (4.1 x 3.6) 1.6 x 2.375 (4.1 x 6.0)
Weight lb. (kg) 0.07 (0.03) 0.25 (0.11) 0.5 (0.2)
*Used to terminate unused ports on receiver splitters and panels.
All specifications subject
76 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3004 Rev. 8/09
 0 - 2500 MHz
TWL-50 50 W 0-2500 MHz

TWL-50, 75, 100, 100HS

COAXIAL RF TERMINATIONS
TWL-75
TWL-100
TWL-100HS
75 W
100 W
100 W
0-2500 MHz
0-2500 MHz
0-2500 MHz
4
Telewave Coaxial Loads feature

ISOLATORS & TERMINATIONS

FEATURES
extremely low VSWR and
• EXTREMELY LOW VSWR
excellent stability. Applications
include hybrids, isolators, power • CW POWER RATINGS
monitors, wattmeters, and coax TO 150 WATTS
line terminations. • DRY DIELECTRIC

Telewave load s are cu s tom • BROAD FREQUENCY RANGE

machined to withstand bench or • RUGGED CONSTRUCTION
field use. The conservative power • QUICK-CHANGE
rating provides substantial overload CONNECTORS
protection. Unlike liquid dielectric
loads, Telewave dr y coaxial TWL-50
terminations can be operated in
any position.
All connectors have gold-plated TWL-75
center pins for maximum
conduc tivit y. Quick- Change
connectors are standard on these
loads, allowing easy configuration
for any application. Specif y
connector type(s) when ordering.
For added flexibility, straight or
elbow-type male-male adapters
are available.

TWL-100

COMMON SPECIFICATIONS
Frequency range 0 - 2500 MHz
Nominal impedance 50 ohms
Temperature rating 40°C max ambient - 100% of rated power TWL-100HS
95°C max ambient - 50% of rated power
50% overload rating 2 minutes
MODEL TWL-50 TWL-75 TWL-100 TWL-100HS
Maximum CW avg power 50 watts 75 watts 100 watts 100 watts
Max VSWR (N connector) 1.1:1 1.05:1 1.05:1 1.05:1
Dimensions (H x dia.) in. 6 x 1.75 8 x 2.25 7.25 x 3.375 7 H x 2.75 W x 2.75 D
(incl. connector) cm 15.2 x 4.5 20.3 x 5.7 18.4 x 8.6 17.8 x 7 x 7
Weight lb. (kg) 1 (0.5) 2.1 (1) 4 (1.8) 2.7 (1.2)
Connectors Quick-Change N Female (std.) Quick-Change N Male (std.)
UHF, TNC, BNC, 7-16 DIN (opt.) UHF, TNC, BNC, 7-16 DIN (opt.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 77
TWDS-3005 Rev. 10/06
 0 - 2500 MHz
TWL-150 150 W 0-2500 MHz
TWL-300 300 W 0-1000 MHz
TWL-150, TWL-300
HIGH POWER TERMINATIONS

The Telewave TWL-150 Bench Te l e w ave l o a d s a r e c u s to m

Load is ideal as a general purpose machined to withstand bench or
medium power termination. It is field use. The conservative power
perfectly suited for terminating the rating provides substantial overload
Model 44A Broadband wattmeter, protection. Unlike liquid dielectric
or any other application requiring a load s, Telewave dr y coa x ial
very low VSWR, 50 ohm termination. terminations can be operated in any
The carry handle and rugged position.
construction allow convenient field
All connectors have gold-plated
use.
center pins for maximum
The Telewave TWL-300 Bench Load conduc tiv it y. Q uic k- Chang e
is our highest power standard connectors are standard on these TWL-150
termination. This load is designed loads, allowing easy configuration
for testing high power amplifiers, for any applic ation. Specif y
or applications requiring longer connector type(s) when ordering.
duty cycles.
For added flexibility, straight or
Telewave coaxial loads feature elbow-type male-male adapters are
extremely low VSWR and excellent available.
stability. Applications include
hybrids, isolators, power monitors,
wat tmeters, and coax line
terminations.

TWL-300

SPECIFICATIONS TWL-150 TWL-300

Frequency range 0 - 2500 MHz 0 - 1000 MHz
Power input (max) 150 watts 300 watts
Impedance (nom) 50 ohms
VSWR (max) 1.05:1 1.25:1
Return loss (typ.) 32 dB 18 dB
Temperature rating 100% of rated power at 40°C • 50% of rated power at 95°C
50% overload rating 2 Minutes
Connector Quick-Change N Female (std.), UHF, TNC, BNC, 7-16 DIN
Dimensions (HWD) in. (cm) 6.5 x 3.5 x 6.5 (16.5 x 8.9 x 16.5) 8.1 x 2.5 x 9.5 (20.6 x 6.4 x 24.1)
Footprint in. (cm) 7 x 4 (17.8 x 10.2) 9.5 x 4.6 (24.1 x 11.7)
Weight lb. (kg) 4.8 (2.2) 13 (5.9)
Finish High Temp Black

All specifications subject

78 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-3001 Rev. 5/12
 66 - 108 MHz

T-1030 / T-1060
FERRITE ISOLATORS
4
Telewave Single and Dual Ferrite Isolators prevent

ISOLATORS & TERMINATIONS

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to
the highest quality standards. These isolators handle
up to 50 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 3 MHz from the original CAVITY-MOUNT ISOLATOR
center frequency, and typical isolation is 35 dB for T-1030 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-1060 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-1030 T-1060

Frequency band 66-108 MHz Isolator type Single Dual
Tuning range (typ.) ± 3 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 50 watts Insertion loss (typ.) 0.65 dB 1.0 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions in. (incl. loads) 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 1.5 (1.4) 6 (2.7)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 79
TWDS-4001 Rev. 8/09
 118 - 174 MHz

T-1530 / T-1560
FERRITE ISOLATORS

Telewave Single and Dual Ferrite Isolators prevent

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 100 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 4 MHz from the original CAVITY-MOUNT ISOLATOR
center frequency, and typical isolation is 35 dB for T-1530 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
range. Each isolator is manufactured for a specific T-1560 DUAL ISOLATOR
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-1530 T-1560

Frequency band 118-174 MHz Isolator type Single Dual
Tuning range (typ.) ± 4 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 100 watts Insertion loss (typ.) 0.4 dB 0.8 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

80 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-4005 Rev. 8/09
 148 - 174 MHz

T-1530M / T-1560M
MEDIUM POWER VHF ISOLATORS
4
Telewave T-1530M and T-1560M

ISOLATORS & TERMINATIONS

Medium Power Isolators protect
t r a n s mi t te r s f ro m ref le c te d
power, and provide maximum
intermodulation suppression. A dual-
stage unit can provide as much
as 70 dB isolation for adjacent
channel suppression. The low
loss characteristic of the Telewave
design insures maximum power
transfer to the antenna system.
A l l Te l e w a v e i s o l a t o r s a r e
manufactured and tested in our T-1530M SINGLE ISOLATOR
own plant to the highest quality
standards. These isolators handle
up to 115 watts of continuous
power, with several different load
options. One or two removeable
60 watt loads are included in the
basic configuration. Higher power
load options can be specified with
an order.
Telewave isolators are magnetically
compensated to allow mounting
on any surface without significant
detuning. Circulation direction may
be specified for special mounting
situations. To prevent radiation of
harmonics, a cavity or harmonic
filter should be placed between the
isolator and the antenna.
N OT E : I S O L ATO R S A R E FAC TO R Y
T U N A B L E O N LY, A N D A R E B U I LT F O R
A S P EC I FI C FR EQ U E N C Y.
ISOLATION DATA IS MEASURED WITH T-1560M DUAL ISOLATOR
POWER APPLIED.

SPECIFICATIONS T-1530M T-1560M

Frequency band 148-174 MHz Isolator type Single Dual
Input power (continuous) 115 watts Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
VSWR (typ.) 1.3:1 Insertion loss (typ.) 0.5 dB 0.9 dB
Impedance 50 ohms Load(s) included (1) 60 W (2) 60 W
Connectors N Female Dimensions (incl. loads) in. 4 x 5.4 x 2.75 8.9 x 5.4 x 2.75
Temperature range -30° C to +60° C cm 10.2 x 13.7 x 7 22.6 x 13.7 x 7
Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 81
TWDS-4029 Rev. 3/13
 216 - 252 MHz

T-2230 / T-2260
FERRITE ISOLATORS

Telewave Single and Dual Ferrite Isolators prevent

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 100 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 5 MHz from the original
center frequency, and typical isolation is 35 dB for T-2230 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-2260 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-2230 T-2260

Frequency band 216-252 MHz Isolator type Single Dual
Tuning range (typ.) ± 5 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 100 watts Insertion loss (typ.) 0.4 dB 0.8 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 1.5 (1.4) 6 (2.7)

All specifications subject

82 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-4011 Rev. 8/09
 300 - 400 MHz

T-3530 / T-3560
FERRITE ISOLATORS
4
Telewave Single and Dual Ferrite Isolators prevent

ISOLATORS & TERMINATIONS

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 150 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 5 MHz from the original
center frequency, and typical isolation is 35 dB for T-3530 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-3560 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-3530 T-3560

Frequency band 300-400 MHz Isolator type Single Dual
Tuning range (typ.) ± 5 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 150 watts Insertion loss (typ.) 0.4 dB 0.8 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 83
TWDS-4013 Rev. 8/09
 400 - 512 MHz

T-4530 / T-4560
FERRITE ISOLATORS

Telewave Single and Dual Ferrite Isolators prevent

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 150 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 5 MHz from the original CAVITY-MOUNT ISOLATOR
center frequency, and typical isolation is 35 dB for T-4530 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-4560 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-4530 T-4560

Frequency band 400-512 MHz Isolator type Single Dual
Tuning range (typ.) ± 5 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 150 watts Insertion loss (typ.) 0.4 dB 0.7 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

84 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-4015 Rev. 8/09
 700 - 806 MHz

T-7530 / T-7560
FERRITE ISOLATORS
4
Telewave Single and Dual Ferrite Isolators prevent

ISOLATORS & TERMINATIONS

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 150 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 6 MHz from the original
center frequency, and typical isolation is 35 dB for T-7530 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-7560 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When RF energy from a strong nearby signal source
power to be reflected down the transmission line enters a transmitter via the antenna, mixing with the
toward the transmitter. The circulatory property of the primary transmitter frequency often occurs, resulting
isolator will direct this energy to the load port, and in the radiation of new, undesired signals. The isolator
protect the transmitter. The load on the isolator must antenna port reflects out-of-band energy back to the
be capable of handling full transmitter power. Age, antenna. In-band energy enters the isolator, and is
water invasion, and incorrect cable length will also circulated to the output load. No energy from nearby
cause impedance changes. The tuned ports of the transmitters enters the protected transmitter from the
isolator provide a constant 50 ohm impedance for the antenna, and intermodulation can be eliminated.
transmitter to avoid overheating and oscillation.

SPECIFICATIONS T-7530 T-7560

Frequency band 700-806 MHz Isolator type Single Dual
Tuning range (typ.) ± 6 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 150 watts Insertion loss (typ.) 0.4 dB 0.8 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 85
TWDS-4021 Rev. 8/09
 806 - 960 MHz

T-8630 / T-8660
FERRITE ISOLATORS

Telewave Single and Dual Ferrite Isolators prevent

intermodulation, and protect transmitters from high
VSWR or mistuned filtering devices by providing a
constant 50 ohm impedance. All Telewave isolators
are manufactured and tested in our own plant to the
highest quality standards. These isolators handle up
to 150 watts of power, with several different load
options. All Telewave isolators include one or two
removeable 35 watt loads in the basic configuration.
Typical tuning range is up to ± 6 MHz from the original
center frequency, and typical isolation is 35 dB for T-8630 SINGLE ISOLATOR
single, and 70 dB for dual.
NOTE: Isolators have limited bandwidth and tuning
T-8660 DUAL ISOLATOR
range. Each isolator is manufactured for a specific
range and tuned to a specific frequency. Please
specify the exact desired operating frequency and
special load requirements with the order.

BENEFITS
Under adverse conditions, the isolator performs
several critical functions:
Broken Antenna, Damaged Cable, High VSWR Intermodulation
All of these conditions will cause large amounts of When in-band or out-of-band RF energy from a strong
power to be reflected down the transmission line nearby signal source enters a transmit ter via the
toward the transmitter. The circulatory property of the antenna, mixing with the primary transmitter frequency
isolator will direct this energy to the load port, and often occurs, resulting in the radiation of new,
protect the transmitter. The load on the isolator must undesired signals. The isolator antenna port reflects
be capable of handling full transmitter power. Age, out-of-band energy back to the antenna. In-band
water invasion, and incorrect cable length will also energy enters the isolator, and is circulated to the
cause impedance changes. The tuned ports of the output load. No energy from nearby transmit ters
isolator provide a constant 50 ohm impedance for the enters the protected transmitter from the antenna,
transmitter to avoid overheating and oscillation. and intermodulation can be eliminated.

SPECIFICATIONS T-8630 T-8660

Frequency band 806-960 MHz Isolator type Single Dual
Tuning range (typ.) ± 6 MHz Isolation (typ. / min) 35 dB / 30 dB 70 dB / 60 dB
Input power 150 watts Insertion loss (typ.) 0.4 dB 0.8 dB
VSWR (typ.) 1.25:1 Load(s) included (1) 35 W (2) 35 W
Impedance 50 ohms Dimensions (incl. loads) in. 4.5 x 4 x 2 6.5 x 4.5 x 2
Connectors N Female cm 11.5 x 10 x 5 16.5 x 11.5 x 5
Temperature range -30° C to +60° C Weight lb. (kg) 3 (1.4) 6 (2.7)

All specifications subject

86 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-4023 Rev. 8/09
 148 - 960 MHz

HIGH POWER ISOLATORS

SINGLE AND DUAL STAGE TO 400 WATTS
4
Telewave High Power Isolators

ISOLATORS & TERMINATIONS

provide maximum effectiveness
in intermodulation suppression.
A dual-stage unit can provide
as much as 85 dB isolation for
adjacent channel suppression,
and better than 60 dB across the
entire bandwidth. The low loss T-1530H T-1560H
characteristic of the Telewave
design insures maximum power
transfer to the antenna system.
Telewave isolators are magnetically
compensated to allow mounting
on any surface without significant
detuning. Circulation direction may
be specified for special mounting
situations. To prevent radiation of
harmonics, a cavity or harmonic
filter should be placed between the T-4530H T-4560H T-8660H
isolator and the antenna.
Telewave High Power Isolators are One or two removable 60 watt loads
available in single or dual stage are supplied standard. Optional NOTE: HIGH POWER ISOLATORS
ARE NOT FIELD TUNABLE, AND
configurations from 148 to 960 loads to 300 watts are available. ARE MANUFACTURED FOR A
MHz. Power capability of up to Con sult Telewave with load SPECIFIC FREQUENCY.
400 watts is available, and many requirements, and special mounting ISOLATION DATA IS MEASURED
different termination options can or mechanical configurations. WITH POWER APPLIED.
be specified.

SPECIFICATIONS T-1530H T-1560H T-4530H T-4560H T-8660H

Isolator type Single Dual Single Dual Dual
Frequency range (MHz) 148-174 148-174 440-475 440-475 806-960
Isolation (typ.) 35 dB 65 dB 35 dB 80 dB 70 dB
Isolation (min) 30 dB 55 dB 30 dB 60 dB 60 dB
Insertion loss (typ.) 0.6 dB 0.9 dB 0.5 dB 0.8 dB 0.8 dB
VSWR (typ.) 1.25:1
Maximum power 300 W 300 W 400 W 400 W 300 W
Connectors N Female
Temperature -30 to +60 °C
Dimensions incl. loads in. 6.75 x 5 x 2.625 9.75 x 6.75 x 2.75 6.5 x 5.25 x 2.5 9 x 6.5 x 2.5 6.5 x 5.25 x 2.75
cm 17.1 x 12.7 x 6.7 24.8 x 17.1 x 7 16.5 x 13.3 x 6.4 22.9 x 16.5 x 6.4 16.5 x 13.3 x 7

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 87
TWDS-4026 Rev. 3/09
 118 - 960 MHz

TS150, 220, 350, 450, 760, 900 SERIES

INTERMOD SUPPRESSION PANELS

Telewave Intermod Suppression

Panels provide a simple, affordable,
high-performance solution for
clea ning up inter ference at
congested radio sites, when a full
combining system may not be cost- TS450PB1
effective. In addition to controlling
transmitter intermodulation, IM
Pa n e l s a l s o g r e a t l y r e d u c e
transmit ter maintenance and
expensive repairs by providing a
constant 50 ohm load, protecting
the transmitter from opens, shorts,
or other faults in the antenna
system.
Telewave IM Panels do not rely on TS150PB2-SP
any cables or other lossy
interconnections, other than to the
transmit chain. Each standard or COMMON SPECIFICATIONS
custom panel includes one or more Tuning range (100-150 W units only) ± 3-6 MHz (depending on freq.)
isolators with appropriate Impedance (nom.) 50 ohms
terminations, and a low-pass filter. VSWR (max) 1.3:1
Each panel is factory tuned to Harmonic attenuation (min) 60 dB
specific frequencies supplied with Connectors N Female
the order. All 100 and 150 watt units MODEL
FREQ. INPUT ISOLATION (dB) INS. LOSS (dB) PANEL LOAD
RANGE POWER TYP MIN TYP HEIGHT POWER
are field tunable by approximately
± 3-6 MHz depending on frequency, TS150PA1 118-174 100 W 38 30 0.6 5.25 in. 50 W
and include complete tuning TS150PB1 118-174 100 W 75 60 0.9 5.25 in. 50 W
ins truc tions. No specialized TS150PA2 148-174 300 W 30 21 0.7 8.75 in. 100 W
equipment is required. TS150PB2 148-174 300 W 60 42 1.0 8.75 in. 100 W
TS220PA1 216-250 100 W 38 30 0.6 5.25 in. 50 W
150 watt units ship with a 35 watt
TS220PB1 216-250 100 W 75 60 0.9 5.25 in. 50 W
primar y load, and a 50 wat t
TS350PA1 300-400 150 W 38 30 0.6 5.25 in. 50 W
termination on the antenna isolation
TS350PB1 300-400 150 W 75 60 0.9 5.25 in. 50 W
(2nd) port. 300 and 400 watt units
ship with a 100 watt second stage TS450PA1 400-512 150 W 38 30 0.5 5.25 in. 50 W
termination, and are not field TS450PB1 400-512 150 W 75 60 0.8 5.25 in. 50 W
tunable. Center frequency and load TS450PA2 440-475 400 W 38 30 0.6 8.75 in. 100 W
requirements must be specified TS450PB2 440-475 400 W 75 60 0.9 8.75 in. 100 W
when ordering. Contact Telewave TS760PA1 763-869 150 W 38 30 0.6 5.25 in. 50 W
if additional information or TS760PB1 763-869 150 W 75 60 0.6 5.25 in. 50 W
assistance is required. TS760PB2 763-869 300 W 75 60 0.9 8.75 in. 100 W
TS900PA1 806-960 150 W 38 30 0.6 5.25 in. 50 W
TS900PB1 806-960 150 W 75 60 0.9 5.25 in. 50 W
TS900PB2 806-960 300 W 75 60 0.9 8.75 in. 100 W

All specifications subject

88 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-4027 Rev. 10/12
 138 - 960 MHz

THRP-1548, 4548, 7648, 8648

HIGH PERFORMANCE REPEATER PANEL
4
The Telewave High Performance The output of the preselector is

ISOLATORS & TERMINATIONS

Repeater Panel greatly improves coupled to one of two types of
the ef fec tive sensitivit y and low-noise preamplifiers. The
selectivity of a repeater receiver for standard configuration uses a TLA
extended mobile and portable series low-noise bipolar preamp.
coverage, and provides maximum This preamp is recommended for
intermodulation protection for the areas that are prone to lightning
transmitter. damage or high ambient signal
levels.
The THRP panel uses a dual isolator
with a 50 watt termination on the The optional TGA series preamps
second stage output, and a low use a PHEMT amplifier for higher THRP-7648 FRONT
pass filter for transmit ter IM s e n s i t i v i t y. T h i s p r e a m p i s
protec tion. This combination recommended for sites with low
provides more than 60 dB of IM existing RF noise levels.
protec tion over a ±5 MHz
The THRP series puts all this
bandwidth, and transmitter 2nd
equipment on one 14” x 19” panel,
harmonic attenuation of over 50
pretuned and ready to install. The
dB.
total price is less then if the
The duplexer utilizes four 4” cavities e q u i p m e n t w a s p u r c h a s e d
in a pass/reject configuration. This separately, and requires less rack
duplexer has only 1.8 dB insertion space.
loss, and provides over 110 dB
FREQUENCY RANGES
isolation. The receiver side of the
THRP-1548 138 - 174 MHz
duplexer is interconnected to two
THRP-4548 400 - 512 MHz
8” high “Q” bandpass cavities, to
THRP-7648 763 - 869 MHz THRP-7648 BACK
form a narrow pass-band
preselector. THRP-8648 806 - 960 MHz

SPECIFICATIONS PREAMP Bipolar PHEMT (opt.)

Frequency range 138-960 MHz Gain - Antenna to RX +8 to +20 dB +8 to +15 dB
Frequency separation (min) 3 MHz Noise figure (typ.) 2.5 dB 0.7 dB
Power input (continuous) 125 watts 3rd order intercp. +35 dBm +25 dBm
VSWR (max) 1.22:1 Input power +12 to +24 VDC +9 to +18 VDC
TX-RX isolation (typ.) 110 dB Current (typ.) 170 mA 40 mA
Insertion loss TX to Antenna (typ.) 1.8 dB
TX 2nd harmonic attn. (typ.) 50 dB
Antenna to TX isolation (typ.) 75 dB at 5 MHz
RX-TX isolation (typ.) 120 dB
Temperature range -30°C to +40°C
Connector type N Female
Finish Grained aluminum
Dimensions (HWD) in. (cm) 14 x 19 x 12 (35.6 x 48.3 x 30.5)
Net weight lb. (kg) 25 (11.4) (400-860 MHz)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 89
TWDS-4028 Rev. 10/13
5 CAVITIES AND FILTERS
 5 CAVITIES AND FILTERS

Bandpass
Bandpass cavities allow a single frequency or a very
narrow group of frequencies to reach a receiver, or leave
a transmitter. All other frequencies are rejected by these
filters.

Bandpass / Bandreject
Pass / Reject cavities offer a modified pass response for
a narrow band of frequencies, and also provide a tunable
notch which deepens the reject response at a particular
frequency. This type of filter supports closer frequency
spacing than a standard pass cavity.

Notch
Notch cavities reject a particular frequency or a narrow
window of frequencies. These cavities have extremely low
insertion loss and are very useful as standalone devices or
in addition to passband filters.

Single / Dual / Triple

Multiple cavities provide a wider passband or reject band,
or a steeper roll-off outside the pass or reject band. They
also enable multiple-window filters which can pass or reject
more than one group of frequencies within a band.

Lowpass / Highpass / Crystal

Low pass filters help to eliminate harmonics and spurs
which may occur above the fundamental frequency of a
transmitter. Highpass filters attenuate unwanted energy
below the fundamental frequency, and are also used
to protect receivers. Crystal filters provide extremely
sharp response to protect receivers from closely-spaced
transmitters.
 30 - 50 MHz

TWPC-0310-1, 0410-1
BANDPASS CAVITIES

The Telewave TWPC-0310-1 and Excellent frequency stability is

TWPC-0410-1 are 10” diameter, achieved by the use of a specially
¼-wavelength, high “Q” bandpass mac hined comp en s ator and
cavit y f ilters with superior Invar rod. The pass frequency is
selectivity. Bandpass cavities reject temperature stable from -30°C to
all frequencies outside a narrow +70°C. Ground loop technology
pass band. These cavities reduce places the center pin of each
transmitter sideband noise, and coupling loop at DC ground
also protect receivers against potential.
desensitization.
Heavy duty materials are used
The TWPC-0310-1 covers 30–40 throughout each cavity to insure
MHz, and the TWPC-0410-1 covers high performance and long life.
40–50 MHz. The tuning range of Cavity top plates are machined
these cavities is approximately from ¼ -inch aluminum, and are
±2.5 MHz from center frequency heliarc welded to the cavity body at
as built. All cavities are tuned to the high current point for improved
specified frequencies prior to conductivity and strength. This
shipping. No further adjustments allows Telewave cavities to handle
should be required. The positive up to 350 watts, depending on
locking mechanism allows for quick insertion loss.
field re-tuning if frequency changes
Rigid foam inserts support the
become necessary.
tuner assembly allowing vertical
These cavities feature calibrated or horizontal mounting. Similar
adjustable coupling, so that insertion metals and alodined aluminum help
loss can be easily set from 0.5 dB to prevent galvanic corrosion. Silver
2 dB or more with corresponding plated tuners and beryllium copper
increases in selectivity. This allows finger stock provide non-corrosive
cavity response to be optimized low loss contact, and ensure reliable,
for any operating environment. At long-term performance.
densely populated sites, the 0310
/ 0410-2 dual and 0310 / 0410-3
triple cavity filters provide much
greater selectivity with minimum
insertion loss. Multiple cavities
can also provide a wider passband
when required. Mounting rails are
provided for all multiple-cavity
filters.

All specifications subject

92 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5011 Rev. 10/07
 30 - 50 MHz

TWPC-0310-1, 0410-1 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS

Figure 1 - TWPC-0310 Figure 2 - TWPC-0410

0 0

10 10

0.5 dB
20 20
Attenuation in dB

0.5 dB
1.0 dB
1.0 dB
30 30 2.0 dB
2.0 dB

40 40

50 50

60 60

70 70

-2 -1 Fc +1 +2 -2 -1 Fc +1 +2
Frequency (MHz)

MODEL TWPC-0310 TWPC-0410

Frequency coverage 30-40 MHz 40-50 MHz
Tuning range from center frequency ± 2.5 MHz ± 2.5 MHz
Insertion loss (adjustable) 0.5 to 2.0 dB 0.5 to 2.0 dB
Attenuation See figure 1 See figure 2
Cavity dimensions (Diam. x H) in. (cm) 10 x 88 (25 x 224) 10 x 72 (25 x 183)
Maximum dimensions with tuners extended in. (cm) 10 x 97 (25 x 246) 10 x 81 (25 x 206)
Net weight lb. (kg) 29 (13.2) 26 (11.8)
Shipping weight lb. (kg) 40 (18.2) 36 (16.3)
COMMON SPECIFICATIONS
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 93
TWDS-5011 Rev. 10/07
 40 - 50 MHz

TWPC-0412-1, TWNC-0412-1
BANDPASS CAVITY, NOTCH CAVITY

The Telewave TWPC-0412-1 is a 12” Multiple cavities can also provide

diameter, ¼-wavelength high “Q” a wider passband or notch when
bandpass cavity filter with superior required. Mounting rails are
selectivity. Band-pass cavities reject provided for all multiple-cavity
all frequencies outside a narrow filters.
pass band. These cavities reduce
Excellent frequency stability is
transmitter sideband noise, and
achieved by the use of a specially
also protect receivers against
mac hined comp en s ator and
desensitization.
Invar rod. The pass frequency is
The TWNC-0412-1 is a 12” diameter, temperature stable from -30°C
¼-wavelength notch cavity with an to +70°C. Telewave Ground Loop
adjustable coupling loop. These technology places the center
cavities reject a narrow band of conductor of each coupling loop at
frequencies, and are often used DC ground potential for lightning
in conjunction with pass cavities in protection and noise reduction.
complex filtering designs. Notch
Heavy duty materials are used
cavities have very low loss outside
throughout each cavity to insure
the notch band, and Telewave
high performance and long life.
can also “tilt” the notch response
Cavity top plates are machined
to move a notch very close to a
from ¼ -inch aluminum, and are
pass frequency without adversely
heliarc welded to the cavity body at
affecting the pass response.
the high current point for improved
The TWPC and TWNC-0412-1 conductivity and strength. This
cover 40-50 MHz. The tuning range allows Telewave cavities to handle
of these cavities is approximately up to 350 watts, depending on
±2.5 MHz from center frequency insertion loss.
as built. All cavities are tuned to
Rigid foam inserts support the
specified frequencies prior to
tuner assembly allowing vertical
shipping. No further adjustments
or horizontal mounting. Similar
should be required. The positive
metals and alodined aluminum help
locking mechanism allows for quick
prevent galvanic corrosion. Silver
field re-tuning if frequency changes
plated tuners and beryllium copper
become necessary.
finger stock provide non-corrosive
These cavities feature calibrated low loss contact, and ensure reliable,
adjustable coupling, so that pass long-term performance.
cavity insertion loss can be easily
set from 0.5 dB to 2 dB or more
with corresponding increases
in selectivity. This allows cavity
response to be optimized for any
operating environment. At densely
populated sites, the 0412-2 dual
pass cavity filter provides greater
selectivity.

All specifications subject

94 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5025 Rev. 9/08
 40 - 50 MHz

TWPC-0412-1, TWNC-0412-1 5

CAVITIES & FILTERS

TYPICAL RESPONSE
Figure 1 - TWPC-0412-1 Figure 2 - TWNC-0412-1

0 0
10 10
Attenuation in dB

20 20
30 30
40 40
50 50
60 60
70 70
80 80

-1.0 -0.5 Fc +0.5 +1.0 -1.0 -0.5 Fc +0.5 +1.0

Frequency (MHz)

SPECIFICATIONS TWPC / TWNC-0412-1

Frequency coverage 40-50 MHz
Tuning range from center frequency ± 2.5 MHz
Insertion loss (adjustable on pass cavity) 0.5 to 2.0 dB (Notch cavity 0.2 dB max)
Attenuation at 1 dB insertion loss See Figure 1, 2
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 12 x 72 (30 x 183)
Maximum dimensions with tuners extended in. (cm) 12 x 81 (30 x 206)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 27 (68.6)
Shipping weight lb. (kg) 38 (96.5)
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 95
TWDS-5025 Rev. 9/08
 88 - 108 MHz

TWPC-1005-1,2
BANDPASS CAVITIES

The Telewave T WPC-10 05 -1, Heavy duty materials are used

and 10 05 -2 are 5” diameter, throughout each cavity to insure
¼-wavelength, high “Q” bandpass high performance and long life.
cavity filter with superior selectivity. Cavity top plates are machined
Band pa s s c avitie s rejec t all from ¼ -inch aluminum, and are
frequencies outside a narrow heliarc welded to the cavity body at
pass band. These cavities reduce the high current point for improved
transmitter sideband noise, and conductivity and strength. This
also protect receivers against allows Telewave cavities to handle
desensitization. up to 350 watts, depending on
insertion loss.
TWPC-1005 cavities cover 88-108
MHz, and can be tuned at 50 or Rigid foam inserts support the
75 ohms upon request. All cavities tuner assembly allowing vertical
are tuned to specified frequencies or horizontal mounting. Similar
prior to shipping, and no further metals and alodined aluminum help
adjustments should be required. prevent galvanic corrosion. Silver
The positive locking mechanism plated tuners and beryllium copper
allows for quick field re-tuning finger stock provide non-corrosive
if frequency changes become low loss contact, and ensure reliable,
necessary. long-term performance.
TWPC-1005-1
These cavities feature calibrated
adjustable coupling, and insertion
loss can be easily set from 0.5 dB to
2 dB or more to improve selectivity.
This allows cavity response to
be optimized for any operating
environment. At densely populated
sites, the TWPC-1005-2 dual cavity
filter provides greater selectivity
with minimum inser tion loss.
Multiple cavities can also provide
a wider passband when required.
Mounting rails are provided for all
multiple-cavity filters.
Excellent frequency stability is
achieved by the use of a specially
mac hined comp en s ator and
Invar rod. The pass frequency is
temperature stable from -30°C
to +70°C. Telewave Ground Loop
technology places the center
conductor of each coupling loop at
DC ground potential for lightning
protection and noise reduction. TWPC-1005-2

All specifications subject

96 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5034 Rev. 10/08
 88 - 108 MHz

TWPC-1005-1,2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS

Figure 1 TWPC-1005-1 SINGLE Figure 2 TWPC-1005-2 DUAL

0 0
10 10
20 20
Attenuation in dB

30 30
40 40
50 50
60 60
70 70
80 80

-5 -2.5 Fc +2.5 +5 -5 -2.5 Fc +2.5 +5

Frequency (MHz)

MODEL TWPC-1005-1 TWPC-1005-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation at 1 db insertion loss See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 48 (13 x 123) 5.25 x 19 x 48 (13 x 48 x 123)
Net weight lb. (kg) 5 (2.3) 12 (5.5)
Shipping weight lb. (kg) 8 (3.6) 16 (7.3
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 36 (13 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 97
TWDS-5034 Rev. 10/08
 88 - 108 MHz

TWPC-1008-1, 2
BANDPASS CAVITIES

The Telewave TWPC-1008-1 and Heavy duty materials are used

TWPC-1008-2 are 8” diameter, throughout each cavity to insure
¼-wavelength, high “Q” bandpass high performance and long life.
cavit y f ilters with superior Cavity top plates are machined
selectivity. Bandpass cavities reject from ¼ -inch aluminum, and are
all frequencies outside a narrow heliarc welded to the cavity body at
pass band. These cavities reduce the high current point for improved
transmitter sideband noise, and conductivity and strength. This
also protect receivers against allows Telewave cavities to handle
desensitization. up to 350 watts, depending on
insertion loss.
TWPC-1008 cavities cover 88-108
MHz, and can be tuned at 50 or Rigid foam inserts support the
75 ohms upon request. All cavities tuner assembly allowing vertical
are tuned to specified frequencies or horizontal mounting. Similar
prior to shipping, and no further metals and alodined aluminum help
adjustments should be required. prevent galvanic corrosion. Silver
The positive locking mechanism plated tuners and beryllium copper
allows for quick field re-tuning finger stock provide non-corrosive
if frequency changes become low loss contact, and ensure reliable,
necessary. long-term performance. TWPC-1008-1

These cavities feature calibrated

adjustable coupling, and insertion
loss can be easily set from 0.5 dB to
2 dB or more to improve selectivity.
This allows cavity response to
be optimized for any operating
environment. At densely populated
sites, the TWPC-1008-2 dual cavity
filter provides greater selectivity
with minimum inser tion loss.
Multiple cavities can also provide
a wider passband when required.
Mounting rails are provided for all
multiple-cavity filters.
Excellent frequency stability is
achieved by the use of a specially
mac hined comp en s ator and
Invar rod. The pass frequency is
temperature stable from -30°C
to +70°C. Telewave Ground Loop
technology places the center
conductor of each coupling loop at
DC ground potential for lightning TWPC-1008-2
protection and noise reduction.

All specifications subject

98 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5035 Rev. 12/06
 88 - 108 MHz

TWPC-1008-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TWPC-1008-1 SINGLE Figure 2 TWPC-1008-2 DUAL

0 0
10 10
Attenuation in dB

20 20
30 30
40 40
50 50
60 60
70 70
80 80

-5 -2.5 Fc +2.5 +5 -5 -2.5 Fc +2.5 +5

Frequency (MHz)

MODEL TWPC-1008-1 TWPC-1008-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation at 1 db insertion loss See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 48 (20 x 123) 8.25 x 19 x 48
(20 x 48 x 123)
Net weight lb. (kg) 11 (5) 24 (10.9)
Shipping weight lb. (kg) 16 (7.3) 30 (13.6)
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Threaded Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 36 (13 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 99
TWDS-5035 Rev. 12/06
 88 - 108 MHz

TPRC-1005-1, 2
PASS-REJECT CAVITIES

The Telewave TPRC-1005-1 and conductor of each coupling loop at

TPRC-1005-2 are 5” diameter, DC ground potential for lightning
¼-wavelength Pass-Reject cavities protection and noise reduction.
with an adjustable coupling loop
Heavy duty materials are used
and tuning capacitor. Pass-Reject
throughout each cavity to insure
cavities reject all frequencies
high performance and long life.
outside a narrow pass band, with
Cavity top plates are machined
a tunable notch for additional
from ¼ -inch aluminum, and are
protection with close spacing.
heliarc welded to the cavity body at
These cavities are commonly used
the high current point for improved
to reduce transmitter sideband
conductivity and strength. This
noise, and protect receivers against
allows Telewave cavities to handle
desensitization.
up to 350 watts, depending on
TPRC-1005 cavities cover 88-108 insertion loss.
MHz, and can be tuned at 50 or
Rigid foam inserts support the
75 ohms upon request. All cavities
tuner assembly allowing vertical
are tuned to specified frequencies
or horizontal mounting. Similar
prior to shipping, and no further
metals and alodined aluminum help
adjustments should be required. TPRC-1005-1
prevent galvanic corrosion. Silver
The positive locking mechanism
plated tuners and beryllium copper
allows for quick field re-tuning
finger stock provide non-corrosive
if frequency changes become
low loss contact, and ensure reliable,
necessary.
long-term performance.
These cavities feature calibrated
adjustable coupling, and insertion
loss can be easily set from 0.5 dB to
2 dB or more to improve selectivity.
This allows cavity response to
be optimized for any operating
environment. At densely populated
sites, the TPRC-1005-2 dual cavity
filter provides greater selectivity
with minimum inser tion loss.
Multiple cavities can also provide
a wider passband when required.
Mounting rails are provided for all
multiple-cavity filters.
Excellent frequency stability is
achieved by the use of a specially
machined compensator and Invar
rod. The pass and reject frequencies
are temperature stable from -30°C TPRC-1005-2
to +70°C. Telewave Ground Loop
technology places the center

All specifications subject

100 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5007 Rev. 3/10
 88 - 108 MHz

TPRC-1005-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TPRC-1005-1 Figure 2 TPRC-1005-2
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

-0.2 0 +0.2 +0.4 +0.6 +0.8 +1.0 +1.2 -0.2 0 +0.2 +0.4 +0.6 +0.8 +1.0 +1.2
Frequency (MHz)

MODEL TPRC-1005-1 TPRC-1005-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation at 1 db insertion loss See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 46 (13 x 117) 5.25 x 19 x 46 (13 x 48 x 117)
Net weight lb. (kg) 5 (2.3) 12 (5.5)
Shipping weight lb. (kg) 8 (3.6) 16 (7.3)
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +60°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Threaded Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 36 (13 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: Customized response curves are available to meet exact system requirements.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 101
TWDS-5007 Rev. 3/10
 88 - 108 MHz

TPRC-1008-1, 2
PASS-REJECT CAVITIES

The Telewave TPRC-1008-1 and conductor of each coupling loop at

TPRC-1008-2 are 8” diameter, DC ground potential for lightning
¼-wavelength Pass-Reject cavities protection and noise reduction.
with an adjustable coupling loop
Heavy duty materials are used
and tuning capacitor. Pass-Reject
throughout each cavity to insure
cavities reject all frequencies
high performance and long life.
outside a narrow pass band, with
Cavity top plates are machined
a tunable notch for additional
from ¼ -inch aluminum, and are
protection with close spacing.
heliarc welded to the cavity body at
These cavities are commonly used
the high current point for improved
to reduce transmitter sideband
conductivity and strength. This
noise, and protect receivers against
allows Telewave cavities to handle
desensitization.
up to 350 watts, depending on
TPRC-1008 cavities cover 88-108 insertion loss.
MHz, and can be tuned at 50 or
Rigid foam inserts support the
75 ohms upon request. All cavities
tuner assembly allowing vertical
are tuned to specified frequencies
or horizontal mounting. Similar
prior to shipping, and no further
metals and alodined aluminum help
adjustments should be required.
prevent galvanic corrosion. Silver
The positive locking mechanism
plated tuners and beryllium copper
allows for quick field re-tuning TPRC-1008-1
finger stock provide non-corrosive
if frequency changes become
low loss contact, and ensure reliable,
necessary.
long-term performance.
These cavities feature calibrated
adjustable coupling, and insertion
loss can be easily set from 0.5 dB to
2 dB or more to improve selectivity.
This allows cavity response to
be optimized for any operating
environment. At densely populated
sites, the TPRC-1008-2 dual cavity
filter provides greater selectivity
with minimum inser tion loss.
Multiple cavities can also provide
a wider passband when required.
Mounting rails are provided for all
multiple-cavity filters.
Excellent frequency stability is
achieved by the use of a specially
machined compensator and Invar
rod. The pass and reject frequencies
are temperature stable from -30°C
TPRC-1008-2
to +70°C. Telewave Ground Loop
technology places the center

All specifications subject

102 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5008 Rev. 10/12
 88 - 108 MHz

TPRC-1008-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TPRC-1008-1 Figure 2 TPRC-1008-2
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

-0.1 0 +0.1 +0.2 +0.3 +0.4 +0.5 +0.6 -0.2 0 +0.2 +0.4 +0.6 +0.8 +1.0 +1.2
Frequency (MHz)

MODEL TPRC-1008-1 TPRC-1008-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation at 1 db insertion loss See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 46 (20 x 117) 8.25 x 19 x 46 (20 x 48 x 117)
Net weight lb. (kg) 11 (5) 24 (10.9)
Shipping weight lb. (kg) 16 (7.3) 30 (13.6)
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +60°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 36 (13 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: Customized response curves are available to meet exact system requirements.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 103
TWDS-5008 Rev. 10/12
 88 - 108 MHz

TWNC-1005-1, 2
NOTCH CAVITIES

The Telewave TWNC-1005-1 and DC ground potential for lightning

TWNC-1005-2 are 5” diameter, protection and noise reduction.
¼-wavelength notch cavities with
Heavy duty materials are used
an adjustable coupling loop. Notch
throughout each cavity to insure
cavities are typically used together
high performance and long life.
with Pass or Pass/Reject cavities to
Cavity top plates are machined
eliminate a particular frequency.
from ¼ -inch aluminum, and are
Notch cavities have very low loss
heliarc welded to the cavity body at
outside the notch band. Telewave
the high current point for improved
can also “tilt” the notch response
conductivity and strength. This
to move a notch very close to a
allows Telewave cavities to handle
pass frequency without adversely
up to 350 watts, depending on
affecting the pass response.
insertion loss.
TWNC-1005 cavities cover 88-108
Rigid foam inserts support the
MHz, and can be tuned at 50 or
tuner assembly allowing vertical
75 ohms upon request. All cavities
or horizontal mounting. Similar
are tuned to specified frequencies
metals and alodined aluminum help
prior to shipping, and no further
prevent galvanic corrosion. Silver
adjustments should be required. TWNC-1005-1
plated tuners and beryllium copper
The positive locking mechanism
finger stock provide non-corrosive
allows for quick field re-tuning
low loss contact, and ensure reliable,
if frequency changes become
long-term performance.
necessary.
These cavities feature calibrated
adjustable coupling, which can be
easily changed to improve notch
depth. This allows cavity response
to be optimized for any operating
environment. At densely populated
sites, the TWNC-1005-2 dual cavity
filter provides a deeper notch with
minimum insertion loss. Multiple
cavities can also provide a wider
passband when required. Mounting
rails are provided for all multiple-
cavity filters.
Excellent frequency stability is
achieved by the use of a specially
mac hined comp en s ator and
Invar rod. The notch frequency is
temperature stable from -30°C
to +70°C. Telewave Ground Loop
TWNC-1005-2
technology places the center
conductor of each coupling loop at

All specifications subject

104 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5009 Rev. 10/08
 88 - 108 MHz

TWNC-1005-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TWNC-1005-1 Figure 2 TWNC-1005-2
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

-3 -2 -1 Fc +1 +2 +3 -6 -4 -2 Fc +2 +4 +6
Frequency (MHz)

MODEL TWNC-1005-1 TWNC-1005-2

Insertion loss (max) 0.2 dB 0.4 dB
Attenuation at notch frequency See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 46 (13 x 117) 5.25 x 19 x 46 (13 x 48 x 117)
Net weight lb. (kg) 5 (2.3) 12 (5.5)
Shipping weight lb. (kg) 8 (3.6) 16 (7.3
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) 350 watts
Temperature range -30°C to +60°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 36 (13 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: Pass cavities are also available in 8” and 10” diameter
Customized response curves are available to meet exact system requirements.
Contact Telewave for recommendations on your specific design.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 105
TWDS-5009 Rev. 10/08
 88 - 108 MHz

TWNC-1008-1, 2
NOTCH CAVITIES

The Telewave TWNC-1008-1 and DC ground potential for lightning

TWNC-1008-2 are 8” diameter, protection and noise reduction.
¼-wavelength notch cavities with
Heavy duty materials are used
an adjustable coupling loop. Notch
throughout each cavity to insure
cavities are typically used together
high performance and long life.
with Pass or Pass/Reject cavities to
Cavity top plates are machined
eliminate a particular frequency.
from ¼ -inch aluminum, and are
Notch cavities have very low loss
heliarc welded to the cavity body at
outside the notch band. Telewave
the high current point for improved
can also “tilt” the notch response
conductivity and strength. This
to move a notch very close to a
allows Telewave cavities to handle
pass frequency without adversely
up to 350 watts, depending on
affecting the pass response.
insertion loss.
TWNC-1008 cavities cover 88-108
Rigid foam inserts support the
MHz, and can be tuned at 50 or
tuner assembly allowing vertical
75 ohms upon request. All cavities
or horizontal mounting. Similar
are tuned to specified frequencies
metals and alodined aluminum help
prior to shipping, and no further
prevent galvanic corrosion. Silver
adjustments should be required.
plated tuners and beryllium copper
The positive locking mechanism
finger stock provide non-corrosive
allows for quick field re-tuning TWNC-1008-1
low loss contact, and ensure reliable,
if frequency changes become
long-term performance.
necessary.
These cavities feature calibrated
adjustable coupling, which can
be easily changed to improve
selec tivity. This allows cavity
response to be optimized for any
operating environment. At densely
populated sites, the TWNC-1008-2
dual cavity filter provides a deeper
notch with minimum insertion loss.
Multiple cavities can also provide
a wider notch when required.
Mounting rails are provided for all
multiple-cavity filters.
Excellent frequency stability is
achieved by the use of a specially
mac hined comp en s ator and
Invar rod. The notch frequency is
temperature stable from -30°C
to +70°C. Telewave Ground Loop
TWNC-1008-2
technology places the center
conductor of each coupling loop at

All specifications subject

106 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5010 Rev. 10/12
 88 - 108 MHz

TWNC-1008-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TWNC-1008-1 Figure 2 TWNC-1008-2
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

-0.6 -0.4 -0.2 Fc +0.2 +0.4 +0.6 -0.6 -0.4 -0.2 Fc +0.2 +0.4 +0.6
Frequency (MHz)

MODEL TWNC-1008-1 TWNC-1008-2

Insertion loss (max) 0.2 dB 0.4 dB
Attenuation at notch frequency See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 46 (20.3 x 117) 8.25 x 19 x 46 (20 x 48 x 117)
Net weight lb. (kg) 11 (5) 24 (10.9)
Shipping weight lb. (kg) 16 (7.3) 30 (13.6)
COMMON SPECIFICATIONS
Tuning frequency range 88-108 MHz
Nominal impedance 50 ohms (75 ohm opt.)
VSWR at resonance (max) 1.5:1
Input power (max) 350 watts
Temperature range -30°C to +60°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 36 (20 x 91)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: Pass cavities are also available in 8” and 10” diameter
Customized response curves are available to meet exact system requirements.
Contact Telewave for recommendations on your specific design.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 107
TWDS-5010 Rev. 10/12
 118 - 148 MHz

TWPC-1405-1, 2, 3
BANDPASS CAVITIES

TWPC-1405-1 TWPC-1405-2 TWPC-1405-3

The Telewave TWPC-1405-1, 1405- be optimized for any operating from ¼ -inch aluminum, and are
2, and 1405-3 are 5” diameter, environment. At densely populated heliarc welded to the cavity body at
¼-wavelength, high “Q” bandpass sites, the 1405-2 or 1405-3 cavity the high current point for improved
cavit y f ilters with superior filters provide greater selectivity conductivity and strength. This
selectivity. Bandpass cavities reject with minimum inser tion loss. allows Telewave cavities to handle
all frequencies outside a narrow Multiple cavities can also provide up to 350 watts, depending on
pass band. These cavities reduce a wider passband when required. insertion loss.
transmitter sideband noise, and Mounting rails are provided for all
Rigid foam inserts support the
also protect receivers against multiple-cavity filters.
tuner assembly allowing vertical
desensitization.
Excellent frequency stability is or horizontal mounting. Similar
TWPC-1405 cavities cover 118- achieved by the use of a specially metals and alodined aluminum help
148 MHz. All cavities are tuned mac hined comp en s ator and prevent galvanic corrosion. Silver
to specified frequencies prior to Invar rod. The pass frequency is plated tuners and beryllium copper
shipping, and no further adjustments temperature stable from -30°C finger stock provide non-corrosive
should be required. The positive to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
locking mechanism allows for quick technology places the center long-term performance.
field retuning if frequency changes conductor of each coupling loop at
become necessary. DC ground potential for lightning
protection and noise reduction.
These cavities also feature calibrated
adjustable coupling, and insertion Heavy duty materials are used
loss can be easily set from 0.5 dB to throughout each cavity to insure
2 dB or more to improve selectivity. high performance and long life.
This allows cavity response to Cavity top plates are machined

All specifications subject

108 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5021 Rev. 12/06
 118 - 148 MHz

TWPC-1405-1, 2, 3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2 Figure 3
TWPC-1405-1 SINGLE TWPC-1405-2 DUAL TWPC-1405-3 TRIPLE
0 0 0

10 10 10

0.5 dB
20 20 20
1.0 dB
Attenuation in dB

30 2.0 dB
30 30

40 40 1.0 dB 40

50 50 50
2.0 dB

60 60 60 1.5 dB

4.0 dB
70 70 70
3.0 dB

6.0 dB

-4 -2 Fc +2 +4 -4 -2 Fo +2 +4 -4 -2 Fo +2 +4
Frequency (MHz)

MODEL TWPC-1405-1 TWPC-1405-2 TWPC-1405-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.5 to 6.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 5 x 35 5.25 x 19 x 35 5.25 x 19 x 35
extended in. (cm) (13 x 89) (13 x 48 x 89) (13 x 48 x 89)
Net weight lb. (kg) 6 (2.7) 12.5 (5.7) 20 (9.1)
Shipping weight lb. (kg) 9 (4.1) 15.5 (7) 23 (10.4)
COMMON SPECIFICATIONS
Tuning frequency range 118-148 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 30 (13 x 76)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 109
TWDS-5021 Rev. 12/06
 118 - 148 MHz

TWPC-1408-1, 2
BANDPASS CAVITIES

TWPC-1408-1 TWPC-1408-2

T he Telew ave T WPC-14 0 8 -1 response to be optimized for any from ¼ -inch aluminum, and are
and 1408 -2 are 8” diameter, operating environment. At densely heliarc welded to the cavity body at
¼-wavelength, high “Q” bandpass populated sites, the 1408-2 cavity the high current point for improved
cavit y f ilters with superior filters provide greater selectivity conductivity and strength. This
selectivity. Bandpass cavities reject with minimum inser tion loss. allows Telewave cavities to handle
all frequencies outside a narrow Multiple cavities can also provide up to 350 watts, depending on
pass band. These cavities reduce a wider passband when required. insertion loss.
transmitter sideband noise, and Mounting rails are provided for all
Rigid foam inserts support the
also protect receivers against multiple-cavity filters.
tuner assembly allowing vertical
desensitization.
Excellent frequency stability is or horizontal mounting. Similar
TWPC-1408 cavities cover 118- achieved by the use of a specially metals and alodined aluminum help
148 MHz. All cavities are tuned mac hined comp en s ator and prevent galvanic corrosion. Silver
to specified frequencies prior to Invar rod. The pass frequency is plated tuners and beryllium copper
shipping, and no further adjustments temperature stable from -30°C finger stock provide non-corrosive
should be required. The positive to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
locking mechanism allows for quick technology places the center long-term performance.
field retuning if frequency changes conductor of each coupling loop at
become necessary. DC ground potential for lightning
protection and noise reduction.
T h e s e c av i t i e s a l s o f e a t u r e
calibrated adjustable coupling, and Heavy duty materials are used
insertion loss can be easily set from throughout each cavity to insure
0.5 dB to 2 dB or more to improve high performance and long life.
selec tivity. This allows cavity Cavity top plates are machined
All specifications subject
110 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5031 Rev. 12/06
 118 - 148 MHz

TWPC-1408-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TWPC-1408-1 SINGLE Figure 2 TWPC-1408-2 DUAL
0 0

10 10

20 0.5 dB
20
Attenuation in dB

1.0 dB
30 30
2.0 dB

40 40

1.0 dB
50 50

2.0 dB
60 60

70 70
4.0 dB

80 80

-3 -2 -1 Fo +1 +2 +3 -3 -2 -1 Fo +1 +2 +3
Frequency (MHz)

MODEL TWPC-1408-1 TWPC-1408-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 36 (25 x 91) 8.25 x 19 x 36 (25 x 48 x 91)
Net weight lb. (kg) 8.5 (3.9) 19 (8.6)
Shipping weight lb. (kg) 13 (5.9) 22 (10)
COMMON SPECIFICATIONS
Tuning frequency range 118-148 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 30 (20 x 76)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 111
TWDS-5031 Rev. 12/06
 118 - 148 MHz

TWPC-1410-1, -2
BANDPASS CAVITIES

TWPC-1410-1 TWPC-1410-2

T h e Te l ew ave T W PC-1410 -1 0.5 dB to 2 dB or more to improve Heavy duty materials are used
and 1410-2 are 10” diameter, selec tivity. This allows cavity throughout each cavity to insure
¼-wavelength, high “Q” bandpass response to be optimized for any high performance and long life.
cavit y f ilters with superior operating environment. At densely Cavity top plates are machined
selectivity. Bandpass cavities reject populated sites, the 1410-2 cavity from ¼ -inch aluminum, and are
all frequencies outside a narrow filters provide greater selectivity heliarc welded to the cavity body at
pass band. These cavities reduce with minimum inser tion loss. the high current point for improved
transmitter sideband noise, and Multiple cavities can also provide conductivity and strength. This
also protect receivers against a wider passband when required. allows Telewave cavities to handle
desensitization. Mounting rails are provided for all up to 350 watts, depending on
multiple-cavity filters. insertion loss.
TWPC-1410 cavities cover 118-
148 MHz. All cavities are tuned Excellent frequency stability is Rigid foam inserts support the
to specified frequencies prior to achieved by the use of a specially tuner assembly allowing vertical
shipping, and no further adjustments mac hined comp en s ator and or horizontal mounting. Similar
should be required. The positive Invar rod. The pass frequency is metals and alodined aluminum help
locking mechanism allows for quick temperature stable from -30°C prevent galvanic corrosion. Silver
field retuning if frequency changes to +70°C. Telewave Ground Loop plated tuners and beryllium copper
become necessary. technology places the center finger stock provide non-corrosive
conductor of each coupling loop at low loss contact, and ensure reliable,
T h e s e c av i t i e s a l s o f e a t u r e
DC ground potential for lightning long-term performance.
calibrated adjustable coupling, and
protection and noise reduction.
insertion loss can be easily set from

All specifications subject

112 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5005 Rev. 12/06
 118 - 148 MHz

TWPC-1410-1, -2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 TWPC-1410-1 SINGLE Figure 2 TWPC-1410-2 DUAL
0 0

10 10

20 0.5 dB 20
Attenuation in dB

1.0 dB
30 30
2.0 dB

40 40

50 50 1.0 dB

60 60 2.0 dB

70 70
4.0 dB

80 80

-3 -2 -1 Fo +1 +2 +3 -3 -2 -1 Fo +1 +2 +3
Frequency (MHz)

MODEL TWPC-1410-1 TWPC-1410-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 10 x 32 (26 x 81) 10.25 x 20 x 32
(26 x 51 x 81.3)
Net weight lb. (kg) 11 (5) 22 (10)
Shipping weight lb. (kg) 14 (6.4) 28 (12.8)
COMMON SPECIFICATIONS
Tuning frequency range 118-148 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 10 x 30 (26 x 76)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 113
TWDS-5005 Rev. 12/06
 118 - 148 MHz

TPRC-1405-1,2
PASS/REJECT CAVITIES

TPRC-1405-1 TPRC-1405-2

T h e Te l e w a v e T PR C -14 0 5 -1 loss can be easily set from 0.5 dB to Heavy duty materials are used
and 1405 -2 are 5” diameter, 2 dB or more to improve selectivity. throughout each cavity to insure
¼-wavelength Pass-Reject cavities This allows cavity response to high performance and long life.
with an adjustable coupling loop be optimized for any operating Cavity top plates are machined
and tuning capacitor. Pass-Reject environment. At densely populated from ¼ -inch aluminum, and are
cavities reject all frequencies sites, the TPRC-1405-2 dual cavity heliarc welded to the cavity body at
outside a narrow pass band, with filter provides greater selectivity the high current point for improved
a tunable notch for additional with minimum inser tion loss. conductivity and strength. This
protection with close spacing. Multiple cavities can also provide allows Telewave cavities to handle
These cavities are commonly used a wider passband when required. up to 350 watts, depending on
to reduce transmitter sideband Mounting rails are provided for all insertion loss.
noise, and protect receivers against multiple-cavity filters.
Rigid foam inserts support the
desensitization.
Excellent frequency stability is tuner assembly allowing vertical
TPRC-1405 cavities cover 118- achieved by the use of a specially or horizontal mounting. Similar
148 MHz. All cavities are tuned machined compensator and Invar metals and alodined aluminum help
to specified frequencies prior to rod. The pass and reject frequencies prevent galvanic corrosion. Silver
shipping, and no further adjustments are temperature stable from -30°C plated tuners and beryllium copper
should be required. The positive to +70°C. Telewave Ground Loop finger stock provide non-corrosive
locking mechanism allows for quick technology places the center low loss contact, and ensure reliable,
field re-tuning if frequency changes conductor of each coupling loop at long-term performance.
become necessary. DC ground potential for lightning
protection and noise reduction.
These cavities feature calibrated
adjustable coupling, and insertion
All specifications subject
114 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5020 Rev. 12/06
 118 - 148 MHz

TPRC-1405-1,2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 - Single, 0.5 dB ins. loss Figure 2 - Dual, 1 dB ins. loss
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

80 80

-1.0 -0.5 Fo +0.5 +1.0 +1.5 +2 +2.5 -1.0 -0.5 Fo +0.5 +1.0 +1.5 +2 +2.5
Frequency (MHz)

MODEL TPRC-1405-1 TPRC-1405-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 35 (13 x 89) 5.25 x 19 x 35 (13 x 48 x 89)
Net weight lb. (kg) 6 (2.7) 12.5 (5.7)
Shipping weight lb. (kg) 9 (4.1) 15.5 (7)
COMMON SPECIFICATIONS
Tuning frequency range 118-148 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 30 (13 x 76)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 115
TWDS-5020 Rev. 12/06
 148 - 174 MHz

TWPC-1505-1, 2, 3
BANDPASS CAVITIES

TWPC-1505-1 TWPC-1505-2 TWPC-1505-3

The Telewave TWPC-1505-1, 1505-2, cavity response to be optimized Cavity top plates are machined
and 1505 -3 are 5” diameter, for any operating environment. At from ¼ -inch aluminum, and are
¼-wavelength, high “Q” bandpass densely populated sites, the 1505-2 heliarc welded to the cavity body at
cavit y f ilters with superior and 1505-3 cavity filters provide the high current point for improved
selectivity. Bandpass cavities reject greater selectivity with minimum conductivity and strength. This
all frequencies outside a narrow insertion loss. Multiple cavities allows Telewave cavities to handle
pass band. These cavities reduce can also provide a wider passband up to 350 watts, depending on
transmitter sideband noise, and when required. Mounting rails are insertion loss.
also protect receivers against provided for all multiple-cavity
Rigid foam inserts support the
desensitization. filters.
tuner assembly allowing vertical
TWPC-1505 cavities cover 148- Excellent frequency stability is or horizontal mounting. Similar
174 MHz. All cavities are tuned achieved by the use of a specially metals and alodined aluminum help
to specified frequencies prior to mac hined comp en s ator and prevent galvanic corrosion. Silver
shipping, and no further adjustments Invar rod. The pass frequency is plated tuners and beryllium copper
should be required. The positive temperature stable from -30°C finger stock provide non-corrosive
locking mechanism allows for quick to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
field retuning if frequency changes technology places the center long-term performance.
become necessary. conductor of each coupling loop at
DC ground potential for lightning
T h e s e c av i t i e s a l s o f e a t u r e
protection and noise reduction.
calibrated adjustable coupling,
and insertion loss can be easily Heavy duty materials are used
set from 0.5 dB to 2 dB or more throughout each cavity to insure
to improve selectivity. This allows high performance and long life.
All specifications subject
116 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5012 Rev. 12/06
 148 - 174 MHz

TWPC-1505-1, 2, 3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2 Figure 3
0 0 0

10 10 10

0.5 dB
20 20 20
1.0 dB
Attenuation in dB

30 2.0 dB 30 30

40 40 1.0 dB 40

50 50 2.0 dB 50

60 60 60
4.0 dB
1.5 dB
70 70 70

3.0 dB 6.0 dB

-4 -2 Fc +2 +4 -4 -2 Fc +2 +4 -4 -2 Fc +2 +4
Frequency (MHz)

MODEL TWPC-1505 TWPC-1505-2 TWPC-1505-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.5 to 6.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 5 x 28 5.25 x 19 x 28 5.25 x 19 x 28
extended in. (cm) (13 x 71) (13 x 48 x 71) (13 x 48 x 71)
Net weight lb. (kg) 5 (2.3) 11 (5) 15 (7)
Shipping weight lb. (kg) 8 (3.6) 14 (6.5) 18 (8.1)
COMMON SPECIFICATIONS
Tuning frequency range 148-174 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 23.5 (13 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 117
TWDS-5012 Rev. 12/06
 148 - 174 MHz

TWPC-1508-1, 2
BANDPASS CAVITIES

TWPC-1508-1 TWPC-1508-2

T he Telew ave T WPC-150 8 -1 response to be optimized for any from ¼ -inch aluminum, and are
and 1508 -2 are 8” diameter, operating environment. At densely heliarc welded to the cavity body at
¼-wavelength, high “Q” bandpass populated sites, the 1508-2 cavity the high current point for improved
cavit y f ilters with superior filters provide greater selectivity conductivity and strength. This
selectivity. Bandpass cavities reject with minimum inser tion loss. allows Telewave cavities to handle
all frequencies outside a narrow Multiple cavities can also provide up to 350 watts, depending on
pass band. These cavities reduce a wider passband when required. insertion loss.
transmitter sideband noise, and Mounting rails are provided for all
Rigid foam inserts support the
also protect receivers against multiple-cavity filters.
tuner assembly allowing vertical
desensitization.
Excellent frequency stability is or horizontal mounting. Similar
TWPC-1508 cavities cover 148- achieved by the use of a specially metals and alodined aluminum help
174 MHz. All cavities are tuned mac hined comp en s ator and prevent galvanic corrosion. Silver
to specified frequencies prior to Invar rod. The pass frequency is plated tuners and beryllium copper
shipping, and no further adjustments temperature stable from -30°C finger stock provide non-corrosive
should be required. The positive to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
locking mechanism allows for quick technology places the center long-term performance.
field retuning if frequency changes conductor of each coupling loop at
become necessary. DC ground potential for lightning
protection and noise reduction.
T h e s e c av i t i e s a l s o f e a t u r e
calibrated adjustable coupling, and Heavy duty materials are used
insertion loss can be easily set from throughout each cavity to insure
0.5 dB to 2 dB or more to improve high performance and long life.
selec tivity. This allows cavity Cavity top plates are machined
All specifications subject
118 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5013 Rev. 12/06
 148 - 174 MHz

TWPC-1508-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2
0 0

10 10

20 0.5 dB 20
Attenuation in dB

1.0 dB
30 30
2.0 dB

40 40

1.0 dB
50 50

60 60 2.0 dB

70 70
4.0 dB

80 80

-3 -2 -1 Fc +1 +2 +3 -3 -2 -1 Fc +1 +2 +3
Frequency (MHz)

MODEL TWPC-1508-1 TWPC-1508-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 28 (20.3 x 71) 8.25 x 19 x 28 (20.3 x 48 x 71)
Net weight lb. (kg) 7.5 (3.4) 17 (7.7)
Shipping weight lb. (kg) 11 (5) 20 (9.1)
COMMON SPECIFICATIONS
Tuning frequency range 148-174 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 23.5 (20 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 119
TWDS-5013 Rev. 12/06
 148 - 174 MHz

TWPC-1510-1, 2
BANDPASS CAVITIES

TWPC-1510-1 TWPC-1510-2

T h e Te l ew ave T W PC-1510 -1 0.5 dB to 2 dB or more to improve Heavy duty materials are used
and 1510-2 are 10” diameter, selec tivity. This allows cavity throughout each cavity to insure
¼-wavelength, high “Q” bandpass response to be optimized for any high performance and long life.
cavit y f ilters with superior operating environment. At densely Cavity top plates are machined
selectivity. Bandpass cavities reject populated sites, the 1510-2 cavity from ¼ -inch aluminum, and are
all frequencies outside a narrow filters provide greater selectivity heliarc welded to the cavity body at
pass band. These cavities reduce with minimum inser tion loss. the high current point for improved
transmitter sideband noise, and Multiple cavities can also provide conductivity and strength. This
also protect receivers against a wider passband when required. allows Telewave cavities to handle
desensitization. Mounting rails are provided for all up to 350 watts, depending on
multiple-cavity filters. insertion loss.
TWPC-1510 cavities cover 148-
174 MHz. All cavities are tuned Excellent frequency stability is Rigid foam inserts support the
to specified frequencies prior to achieved by the use of a specially tuner assembly allowing vertical
shipping, and no further adjustments mac hined comp en s ator and or horizontal mounting. Similar
should be required. The positive Invar rod. The pass frequency is metals and alodined aluminum help
locking mechanism allows for quick temperature stable from -30°C prevent galvanic corrosion. Silver
field retuning if frequency changes to +70°C. Telewave Ground Loop plated tuners and beryllium copper
become necessary. technology places the center finger stock provide non-corrosive
conductor of each coupling loop at low loss contact, and ensure reliable,
T h e s e c av i t i e s a l s o f e a t u r e
DC ground potential for lightning long-term performance.
calibrated adjustable coupling, and
protection and noise reduction.
insertion loss can be easily set from
All specifications subject
120 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5006 Rev. 10/08
 148 - 174 MHz

TWPC-1510-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2
0 0

10 10

20 20
Attenuation in dB

0.5 dB

30 1.0 dB 30

2.0 dB
40 40

50 50 1.0 dB

60 60 2.0 dB

70 70
4.0 dB

80 80

-3 -2 -1 Fc +1 +2 +3 -3 -2 -1 Fc +1 +2 +3
Frequency (MHz)

MODEL TWPC-1510-1 TWPC-1510-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 10 x 28 (25 x 71) 10.25 x 20 x 28 (50 x 48 x 71)
Net weight lb. (kg) 10 (4.6) 21.5 (9.8)
Shipping weight lb. (kg) 13 (6) 24 (10.9)
COMMON SPECIFICATIONS
Tuning frequency range 148-174 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 10 x 23.5 (25 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 121
TWDS-5006 Rev. 10/08
 148 - 174 MHz

TPRC-1505-1,2
PASS-REJECT CAVITIES

TPRC-1505-1 TPRC-1505-2

T h e Te l e w a v e T PR C -15 0 5 -1 to 2 dB or more to improve selec- high performance and long life.

and 1505 -2 are 5” diameter, tivity. This allows cavity response Cavity top plates are machined
¼-wavelength Pass-Reject cavities to be optimized for any operat- from ¼-inch aluminum, and are he-
with an adjustable coupling loop ing environment. At densely pop- liarc welded to the cavity body at
and tuning capacitor. Pass-Reject ulated sites, the TPRC-1505-2 dual the high current point for improved
cavities reject all frequencies out- cavity filter provides greater selec- conductivity and strength. This
side a narrow pass band, with a tun- tivity with minimum insertion loss. allows Telewave cavities to handle
able notch for additional protection Multiple cavities can also provide up to 350 watts, depending on in-
with close spacing. These cavities a wider passband when required. sertion loss.
are commonly used to reduce trans- Mounting rails are provided for all
Rigid foam inserts support the tuner
mitter sideband noise, and protect multiple-cavity filters.
assembly allowing vertical or hori-
receivers against desensitization.
Excellent frequency stability is zontal mounting. Similar metals and
TPRC-1505 cavities cover 148-174 achieved by the use of a specially alodined aluminum help prevent
MHz. All cavities are tuned to spec- machined compensator and Invar galvanic corrosion. Silver plated
ified frequencies prior to shipping, rod. The pass and reject frequen- tuners and beryllium copper finger
and no further adjustments should cies are temperature stable from stock provide non-corrosive low
be required. The positive locking -30°C to +70°C. Telewave Ground loss contact, and ensure reliable,
mechanism allows for quick field Loop technology places the center long-term performance.
re-tuning if frequency changes conductor of each coupling loop at
become necessary. DC ground potential for lightning
protection and noise reduction.
These cavities feature calibrated
adjustable coupling, and insertion Heavy duty materials are used
loss can be easily set from 0.5 dB throughout each cavity to insure
All specifications subject
122 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5024 Rev. 12/06
 148 - 174 MHz

TPRC-1505-1,2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
TPRC-1505-1 TPRC-1505-2
0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

80 80

-1.0 -0.5 Fc +0.5 +1.0 +1.5 +2.0 +2.5 -1.0 -0.5 Fo +.05 +1.0 +1.5 +2 +2.5

Frequency (MHz)

MODEL TPRC-1505-1 TPRC-1505-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 28 (13 x 71) 5.25 x 19 x 28 (13 x 48 x 71)
Net weight lb. (kg) 5 (2.3) 11 (5)
Shipping weight lb. (kg) 8 (3.6) 14 (6.5)
COMMON SPECIFICATIONS
Tuning frequency range 148-174 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length 1/4 wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 23.5 (13 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 123
TWDS-5024 Rev. 12/06
 148 - 174 MHz

TWNC-1505-1,2
NOTCH CAVITIES

TWNC-1505-1 TWNC-1505-2

The Telewave T WNC-1505 -1 selec tivity. This allows cavity Cavity top plates are machined
and 1505 -2 are 5” diameter, response to be optimized for from ¼ -inch aluminum, and are
¼-wavelength notch cavities with any operating environment. At heliarc welded to the cavity body at
an adjustable coupling loop. Notch densely populated sites, the the high current point for improved
cavities are typically used together TWNC-1505-2 dual cavity filter conductivity and strength. This
with Pass or Pass/Reject cavities to provides greater selectivity with allows Telewave cavities to handle
eliminate a particular frequency. minimum insertion loss. Multiple up to 350 watts, depending on
Notch cavities have very low loss cavities can also provide a wider insertion loss.
outside the notch band. Telewave notch when required. Mounting
Rigid foam inserts support the
can also “tilt” the notch response rails are provided for all multiple-
tuner assembly allowing vertical
to move a notch very close to a cavity filters.
or horizontal mounting. Similar
pass frequency without adversely
Excellent frequency stability is metals and alodined aluminum help
affecting the pass response.
achieved by the use of a specially prevent galvanic corrosion. Silver
TWNC-1505 cavities cover 148- machined compensator and Invar plated tuners and beryllium copper
174 MHz. All cavities are tuned rod. The pass and reject frequencies finger stock provide non-corrosive
to specified frequencies prior to are temperature stable from -30°C low loss contact, and ensure reliable,
shipping, and no further adjustments to +70°C. Telewave Ground Loop long-term performance.
should be required. The positive technology places the center
locking mechanism allows for quick conductor of each coupling loop at
field re-tuning if frequency changes DC ground potential for lightning
become necessary. protection and noise reduction.
These cavities feature calibrated Heavy duty materials are used
adjustable coupling, which can throughout each cavity to insure
be easily changed to improve high performance and long life.
All specifications subject
124 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5023 Rev. 10/08
 148 - 174 MHz

TWNC-1505-1,2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS

Figure 1 TWNC-1505-1 Figure 2 TWNC-1505-2

0 0

10 10

20 20
Attenuation in dB

30 30

40 40

50 50

60 60

70 70

-3 -2 -1 Fc +1 +2 +3 -3 -2 -1 Fc +1 +2 +3
Frequency (MHz)

MODEL TWNC-1505-1 TWNC-1505-2

Insertion loss (max) 0.2 dB 0.4 dB
Attenuation at notch frequency See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 5 x 28 (13 x 71) 5.25 x 19 x 28 (13 x 48 x 71)
Net weight lb. (kg) 5 (2.3) 11 (5)
Shipping weight lb. (kg) 8 (3.6) 14 (6.5)
COMMON SPECIFICATIONS
Tuning frequency range 148-174 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) 350 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 23.5 (13 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 125
TWDS-5023 Rev. 10/08
 200 - 300 MHz

TWPC-2205-1,2,3
BANDPASS CAVITY

TWPC-2205-1 TWPC-2205-2 TWPC-2205-3

The Telewave TWPC-2205-1, 2205- cavity response to be optimized Cavity top plates are machined
2, and 2205-3 are 5” diameter, for any operating environment. At from ¼ -inch aluminum, and are
¼-wavelength, high “Q” bandpass densely populated sites, the 2205-2 heliarc welded to the cavity body at
cavit y f ilters with superior and 2205-3 cavity filters provide the high current point for improved
selectivity. Bandpass cavities reject greater selectivity with minimum conductivity and strength. This
all frequencies outside a narrow insertion loss. Multiple cavities allows Telewave cavities to handle
pass band. These cavities reduce can also provide a wider passband up to 350 watts, depending on
transmitter sideband noise, and when required. Mounting rails are insertion loss.
also protect receivers against provided for all multiple-cavity
Rigid foam inserts support the
desensitization. filters.
tuner assembly allowing vertical
TWPC-2205 cavities cover 200- Excellent frequency stability is or horizontal mounting. Similar
300 MHz. All cavities are tuned achieved by the use of a specially metals and alodined aluminum help
to specified frequencies prior to mac hined comp en s ator and prevent galvanic corrosion. Silver
shipping, and no further adjustments Invar rod. The pass frequency is plated tuners and beryllium copper
should be required. The positive temperature stable from -30°C finger stock provide non-corrosive
locking mechanism allows for quick to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
field retuning if frequency changes technology places the center long-term performance.
become necessary. conductor of each coupling loop at
DC ground potential for lightning
T h e s e c av i t i e s a l s o f e a t u r e
protection and noise reduction.
calibrated adjustable coupling,
and insertion loss can be easily Heavy duty materials are used
set from 0.5 dB to 2 dB or more throughout each cavity to insure
to improve selectivity. This allows high performance and long life.
All specifications subject
126 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5014 Rev. 12/06
 200 - 300 MHz

TWPC-2205-1,2,3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2 Figure 3
0 0 0

10 10 10

20 0.5 dB 20 20
Attenuation in dB

1.0 dB
30 30 30
2.0 dB

40 40 1.0 dB 40

50 50 50
2.0 dB

60 60 60

4.0 dB
70 70 70 1.5 dB

3.0 dB 6.0 dB

-4 -2 Fc +2 +4 -4 -2 Fc +2 +4 -4 -2 Fc +2 +4

Frequency (MHz)

MODEL TWPC-2205-1 TWPC-2205-2 TWPC-2205-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.5 to 6.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 5 x 24 5.25 x 19 x 24 5.25 x 19 x 24
extended in. (cm) (13 x 61) (13 x 48 x 61) (13 x 48 x 61)
Net weight lb. (kg) 3 (1.5) 11.5 (5.3) 15 (6.8)
Shipping weight lb. (kg) 7 (3.2) 15 (6.8) 19 (8.6)
COMMON SPECIFICATIONS
Tuning frequency range 200-300 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 18 (13 x 46)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 127
TWDS-5014 Rev. 12/06
 200 - 300 MHz

TWPC-2208-1, 2
BANDPASS CAVITIES

TWPC-2208-2
TWPC-2208-1

The Telewave T WPC-220 8 -1 response to be optimized for any from ¼ -inch aluminum, and are
and 2208 -2 are 8” diameter, operating environment. At densely heliarc welded to the cavity body at
¼-wavelength, high “Q” bandpass populated sites, the 2208-2 cavity the high current point for improved
cavit y f ilters with superior filters provide greater selectivity conductivity and strength. This
selectivity. Bandpass cavities reject with minimum inser tion loss. allows Telewave cavities to handle
all frequencies outside a narrow Multiple cavities can also provide up to 350 watts, depending on
pass band. These cavities reduce a wider passband when required. insertion loss.
transmitter sideband noise, and Mounting rails are provided for all
Rigid foam inserts support the
also protect receivers against multiple-cavity filters.
tuner assembly allowing vertical
desensitization.
Excellent frequency stability is or horizontal mounting. Similar
TWPC-2208 cavities cover 200- achieved by the use of a specially metals and alodined aluminum help
300 MHz. All cavities are tuned mac hined comp en s ator and prevent galvanic corrosion. Silver
to specified frequencies prior to Invar rod. The pass frequency is plated tuners and beryllium copper
shipping, and no further adjustments temperature stable from -30°C finger stock provide non-corrosive
should be required. The positive to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
locking mechanism allows for quick technology places the center long-term performance.
field retuning if frequency changes conductor of each coupling loop at
become necessary. DC ground potential for lightning
protection and noise reduction.
T h e s e c av i t i e s a l s o f e a t u r e
calibrated adjustable coupling, and Heavy duty materials are used
insertion loss can be easily set from throughout each cavity to insure
0.5 dB to 2 dB or more to improve high performance and long life.
selec tivity. This allows cavity Cavity top plates are machined
All specifications subject
128 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5015 Rev. 12/06
 200 - 300 MHz

TWPC-2208-1, 2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2
0 0

10 10

20 0.5 dB 20
Attenuation in dB

1.0 dB
30 30
2.0 dB

40 40

50 50 1.0 dB

60 60
2.0 dB

70 70
4.0 dB

80 80

-3 -2 -1 Fc +1 +2 +3 -3 -2 -1 Fc +1 +2 +3
Frequency (MHz)

MODEL TWPC-2208-1 TWPC-2208-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 8 x 22 (25 x 56) 8.25 x 19 x 22 (25 x 48 x 56)
Net weight lb. (kg) 7 (3.2) 15 (6.8)
Shipping weight lb. (kg) 9 (4.1) 19 (8.6)
COMMON SPECIFICATIONS
Tuning frequency range 200-300 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 8 x 18 (20 x 46)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 129
TWDS-5015 Rev. 12/06
 300 - 400 MHz

TWPC-3505-1,2,3
BANDPASS CAVITY

TWPC-3505-1 TWPC-3505-2 TWPC-3505-3

The Telewave TWPC-3505-1, 3505- set from 0.5 dB to 2 dB or more DC ground potential for lightning
2, and 3505-3 are 5” diameter, to improve selectivity. This allows protection and noise reduction.
¼-wavelength, high “Q” bandpass cavity response to be optimized
Heavy duty materials are used
cavit y f ilters with superior for any operating environment. At
throughout each cavity to insure
selectivity. Bandpass cavities reject densely populated sites, the 3505-2
high performance and long life.
all frequencies outside a narrow and 3505-3 cavity filters provide
Cavity top plates are machined
pass band. These cavities reduce greater selectivity with minimum
from ¼ -inch aluminum, and are
transmitter sideband noise, and insertion loss. Multiple cavities
heliarc welded to the cavity body at
also protect receivers against can also provide a wider passband
the high current point for improved
desensitization. when required. Mounting rails are
conductivity and strength. This
provided for all multiple-cavity
TWPC-3505 cavities cover 300- allows Telewave cavities to handle
filters.
400 MHz. All cavities are tuned up to 350 watts, depending on
to specified frequencies prior to Excellent frequency stability is insertion loss.
shipping, and no further adjustments achieved by the use of a specially
Similar metals and alodined
should be required. The positive mac hined comp en s ator and
aluminum help prevent galvanic
locking mechanism allows for quick Invar rod. The pass frequency is
corrosion. Silver plated tuners
field retuning if frequency changes temperature stable from -30°C
and beryllium copper finger stock
become necessary. to +70°C. Telewave Ground Loop
provide non-corrosive low loss
technology places the center
T h e s e c av i t i e s a l s o f e a t u r e contact, and ensure reliable, long-
conductor of each coupling loop at
calibrated adjustable coupling, term performance.
and insertion loss can be easily
All specifications subject
130 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5022 Rev. 8/09
 300 - 400 MHz

TWPC-3505-1,2,3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2 Figure 3
0 0 0

10 10 10

20 0.5 dB 20 20
Attenuation in dB

1.0 dB
30 30 30
2.0 dB

40 40 1.0 dB 40

50 50 2.0 dB 50

60 60 60
4.0 dB
70 70 70 1.5 dB

3.0 dB 6.0 dB

-4 -2 Fc +2 +4 -4 -2 Fc +2 +4 -4 -2 Fc +2 +4

Frequency (MHz)

MODEL TWPC-3505-1 TWPC-3505-2 TWPC-3505-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.5 to 6.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 5 x 24 5.25 x 19 x 24 5.25 x 19 x 24
extended in. (cm) (13 x 61) (13 x 48 x 61) (13 x 48 x 61)
Net weight lb. (kg) 3 (1.5) 11.5 (5.3) 15 (6.8)
Shipping weight lb. (kg) 7 (3.2) 15 (6.8) 19 (8.6)
COMMON SPECIFICATIONS
Tuning frequency range 300-400 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 18 (13 x 46)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 131
TWDS-5022 Rev. 8/09
 400 - 512 MHz

TWPC-4504-1, 2, 3
BANDPASS CAVITIES

TWPC-4504-1

TWPC-4504-3

TWPC-4504-2

The Telewave TWPC-4504-1, 4504-2, to 4 dB to improve selectivity. Heavy duty materials are used
and 4504 -3 are 4” diameter, This allows cavity response to throughout each cavity to insure
¼-wavelength, high “Q” bandpass be optimized for any operating high performance and long life.
cavit y f ilters with superior environment. At densely populated Cavity top plates are machined
selectivity. Bandpass cavities reject sites, the 4504-2 and -3 cavity filters from ¼ -inch aluminum, and are
all frequencies outside a narrow provide greater selectivity with heliarc welded to the cavity body at
pass band. These cavities reduce minimum insertion loss. Multiple the high current point for improved
transmitter sideband noise, and cavities can also provide a wider conductivity and strength. This
also protect receivers against passband when required. Up to allows Telewave cavities to handle
desensitization. four 4” cavities can be mounted on up to 350 watts, depending on
one 19” x 5.25” panel. insertion loss.
TWPC-4504 cavities cover 400-
512 MHz. All cavities are tuned Excellent frequency stability is Similar metals and alodined
to specified frequencies prior to achieved by the use of a specially aluminum help prevent galvanic
shipping, and no further adjustments mac hined comp en s ator and corrosion. Silver plated tuners
should be required. The positive Invar rod. The pass frequency is and beryllium copper finger stock
locking mechanism allows for quick temperature stable from -30°C provide non-corrosive low loss
field retuning if frequency changes to +70°C. Telewave Ground Loop contact, and ensure reliable, long-
become necessary. technology places the center term performance.
conductor of each coupling loop at
These cavities also feature calibrated
DC ground potential for lightning
adjustable coupling, and insertion
protection and noise reduction.
loss can be easily set from 0.5 dB

All specifications subject

132 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5001 Rev. 10/13
 400 - 512 MHz

TWPC-4504-1, 2, 3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS

Figure 1 Figure 2 Figure 3

0 0 0

10 10 10
0.5 dB

20 1.0 dB 20 20
2.0 dB

30 30 30
Attenuation in dB

1.0 dB

40 40 40
2.0 dB 1.0 dB

50 50 50

60 60 4.0 dB
60
2.0 dB

70 70 70

80 80 80
4.0 dB

-6 -4 -2 Fo +2 +4 +6 -6 -4 -2 Fc +2 +4 +6 -6 -4 -2 Fc +2 +4 +6

Frequency (MHz)

MODEL TWPC-4504-1 TWPC-4504-2 TWPC-4504-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 4 x 8 (10 x 20) 5.25 x 19 x 11 5.25 x 19 x 11
extended in. (cm) (13 x 48 x 28) (13 x 48 x 28)
Net weight lb. (kg) 3.3 (1.5) 11.5 (5.25) 14 (6.8)
Shipping weight lb. (kg) 7 (3.2) 15 (6.8) 19 (8.6)
COMMON SPECIFICATIONS
Tuning frequency range 400-512 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 4 x 8 (10 x 20)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 133
TWDS-5001 Rev. 10/13
 400 - 512 MHz

TWPC-4505-1, 2, 3
BANDPASS CAVITIES - 3/4 WAVE

TWPC-4505-1 TWPC-4505-2 TWPC-4505-3

The Telewave TWPC- 4505-1, 4505- cavity response to be optimized Cavity top plates are machined
2, and 4505-3 are 5” diameter, ¾ for any operating environment. At from ¼ -inch aluminum, and are
wavelength, high “Q” bandpass densely populated sites, the 4505-2 heliarc welded to the cavity body at
cavit y f ilters with superior and 4505-3 cavity filters provide the high current point for improved
selectivity. Bandpass cavities reject greater selectivity with minimum conductivity and strength. This
all frequencies outside a narrow insertion loss. Multiple cavities allows Telewave cavities to handle
pass band. These cavities reduce can also provide a wider passband up to 350 watts, depending on
transmitter sideband noise, and when required. Mounting rails are insertion loss.
also protect receivers against provided for all multiple-cavity
Rigid foam inserts support the
desensitization. filters.
tuner assembly allowing vertical
TWPC-4505 cavities cover 400- Excellent frequency stability is or horizontal mounting. Similar
512 MHz. All cavities are tuned achieved by the use of a specially metals and alodined aluminum help
to specified frequencies prior to mac hined comp en s ator and prevent galvanic corrosion. Silver
shipping, and no further adjustments Invar rod. The pass frequency is plated tuners and beryllium copper
should be required. The positive temperature stable from -30°C finger stock provide non-corrosive
locking mechanism allows for quick to +70°C. Telewave Ground Loop low loss contact, and ensure reliable,
field retuning if frequency changes technology places the center long-term performance.
become necessary. conductor of each coupling loop at
DC ground potential for lightning
T h e s e c av i t i e s a l s o f e a t u r e
protection and noise reduction.
calibrated adjustable coupling,
and insertion loss can be easily Heavy duty materials are used
set from 0.5 dB to 2 dB or more throughout each cavity to insure
to improve selectivity. This allows high performance and long life.
All specifications subject
134 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5018 Rev. 12/06
 400 - 512 MHz

TWPC-4505-1, 2, 3 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 Figure 2 Figure 3
0 0 0

10 10 10

0.5 dB
Attenuation in dB

20 20 20
1.0 dB

30 2.0 dB 30 30

40 40 1.0 dB
40

50 50 50
2.0 dB

60 60 60

4.0 dB 1.5 dB
70 70 70

3.0 dB 6.0 dB

-4 -2 Fc +2 +4 -4 -2 Fc +2 +4 -4 -2 Fc +2 +4
Frequency (MHz)

MODEL TWPC-4505-1 TWPC-4505-2 TWPC-4505-3

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB 1.5 to 6.0 dB
Attenuation See figure 1 See figure 2 See figure 3
Maximum dimensions with tuners 5 x 28 5.25 x 19 x 28 5.25 x 19 x 28
extended in. (cm) (13 x 71) (13 x 48 x 71) (13 x 48 x 71)
Net weight lb. (kg) 5 (2.3) 11.5 (5.3) 15 (6.8)
Shipping weight lb. (kg) 8 (3.6) 14 (6.5) 18 (8.1)
COMMON SPECIFICATIONS
Tuning frequency range 400-512 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¾ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 5 x 23.5 (13 x 60)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 135
TWDS-5018 Rev. 12/06
 400 - 512 MHz

TWPC-4510-1,2
BANDPASS CAVITY

TWPC-4510-1 TWPC-4510-2

T he Telew ave T WPC- 4510 -1 0.5 dB to 2 dB or more to improve Heavy duty materials are used
and 4510-2 are 10” diameter, selec tivity. This allows cavity throughout each cavity to insure
¼-wavelength, high “Q” bandpass response to be optimized for any high performance and long life.
cavit y f ilters with superior operating environment. At densely Cavity top plates are machined
selectivity. Bandpass cavities reject populated sites, the 4510-2 cavity from ¼ -inch aluminum, and are
all frequencies outside a narrow filter provides greater selectivity heliarc welded to the cavity body at
pass band. These cavities reduce with minimum inser tion loss. the high current point for improved
transmitter sideband noise, and Multiple cavities can also provide conductivity and strength. This
also protect receivers against a wider passband when required. allows Telewave cavities to handle
desensitization. Mounting rails are provided for all up to 350 watts, depending on
multiple-cavity filters. insertion loss.
TWPC-4510 cavities cover 400-
512 MHz. All cavities are tuned Excellent frequency stability is Similar metals and alodined
to specified frequencies prior to achieved by the use of a specially aluminum help prevent galvanic
shipping, and no further adjustments mac hined comp en s ator and corrosion. Silver plated tuners
should be required. The positive Invar rod. The pass frequency is and beryllium copper finger stock
locking mechanism allows for quick temperature stable from -30°C provide non-corrosive low loss
field retuning if frequency changes to +70°C. Telewave Ground Loop contact, and ensure reliable, long-
become necessary. technology places the center term performance.
conductor of each coupling loop at
T h e s e c av i t i e s a l s o f e a t u r e
DC ground potential for lightning
calibrated adjustable coupling, and
protection and noise reduction.
insertion loss can be easily set from

All specifications subject

136 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5017 Rev. 8/09
 400 - 512 MHz

TWPC-4510-1,2 5

CAVITIES & FILTERS

TYPICAL BANDPASS CAVITY RESPONSE CURVES
Figure 1 Figure 2
0 0

10 10

20 0.5 dB 20
Attenuation in dB

0 100 200 300 400

KHz
30 1.0 dB
30

40 3.0 dB 40 1.0 dB

50 50 2.0 dB

60 60

70 70
6.0 dB

-4 -3 -2 -1 Fc +1 +2 +3 +4 -4 -3 -2 -1 Fo +1 +2 +3 +4

Frequency (MHz)

MODEL TWPC-4510-1 TWPC-4510-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Maximum dimensions with tuners extended in. (cm) 10 x 17 (25.4 x 43) 10.25 x 20 x 17
(26 x 50.8 x 43)
Net weight lb. (kg) 7.5 (3.4) 17 (7.7)
Shipping weight lb. (kg) 10 (4.5) 22 (10)
COMMON SPECIFICATIONS
Tuning frequency range 400-512 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Cavity dimensions (Diam. x H) in. (cm) 10 x 12 (25.4 x 31)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 137
TWDS-5017 Rev. 8/09
 776 - 825 MHz

TWPC-7908-1, -2
BANDPASS CAVITY

TWPC-7908-1 TWPC-7908-2

T h e Te l e w a v e T W P C -79 0 8 - 0.5 dB to 2 dB or more to improve Heavy duty materials are used

1 and 7908-2 are 8” diameter, selec tivity. This allows cavity throughout each cavity to insure
¼-wavelength, high “Q” bandpass response to be optimized for any high performance and long life.
cavit y f ilters with superior operating environment. At densely Cavity top plates are machined
selectivity. Bandpass cavities reject populated sites, the 7908-2 cavity from ¼ -inch aluminum, and are
all frequencies outside a narrow filter provides greater selectivity heliarc welded to the cavity body at
pass band. These cavities reduce with minimum inser tion loss. the high current point for improved
transmitter sideband noise, and Multiple cavities can also provide conductivity and strength. This
also protect receivers against a wider passband when required. allows Telewave cavities to handle
desensitization. Mounting rails are provided for all up to 350 watts, depending on
multiple-cavity filters. insertion loss.
TWPC-7908 cavities cover 776-
825 MHz. All cavities are tuned Excellent frequency stability is Similar metals and alodined
to specified frequencies prior to achieved by the use of a specially aluminum help prevent galvanic
shipping, and no further adjustments mac hined comp en s ator and corrosion. Silver plated tuners
should be required. The positive Invar rod. The pass frequency is and beryllium copper finger stock
locking mechanism allows for quick temperature stable from -30°C provide non-corrosive low loss
field retuning if frequency changes to +70°C. Telewave Ground Loop contact, and ensure reliable, long-
become necessary. technology places the center term performance.
conductor of each coupling loop at
T h e s e c av i t i e s a l s o f e a t u r e
DC ground potential for lightning
calibrated adjustable coupling, and
protection and noise reduction.
insertion loss can be easily set from

All specifications subject

138 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5028 Rev. 8/09
 776 - 825 MHz

TWPC-7908-1, -2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 - TWPC-7908-1 at 790 MHz Figure 2 - TWPC-7908-2 at 790 MHz
0 0

10 10
0.5 dB

20 1.0 dB
20
Attenuation in dB

30 2.0 dB
30
1.0 dB
40 40

50 50

60 60

70 70

-6 -4 -2 Fc +2 +4 +6 -6 -4 -2 Fc +2 +4 +6
Frequency (MHz)

MODEL TWPC-7908-1 TWPC-7908-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Max size - tuners extended in. (cm) 8 x 11.875 (20.3 x 30.1) 8.25 x 19 x 15.375 (21 x 48.3 x 39.1)
Net weight lb. (kg) 7 (3.2) 17 (7.7)
Shipping weight lb. (kg) 10 (4.5) 22 (10)
COMMON SPECIFICATIONS
Tuning frequency range 776-825 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Cavity size (Diam. x H) in. (cm) 8 x 11.875 (20.3 x 30.2)
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 139
TWDS-5028 Rev. 8/09
 800 - 970 MHz

TWPC-8608-1,-2
BANDPASS CAVITIES

TWPC-8608-1 TWPC-8608-2

The Telewave T WPC- 8608 -1 0.5 dB to 2 dB or more to improve Heavy duty materials are used
and 8608 -2 are 8” diameter, selec tivity. This allows cavity throughout each cavity to insure
¼-wavelength, high “Q” bandpass response to be optimized for any high performance and long life.
cavit y f ilters with superior operating environment. At densely Cavity top plates are machined
selectivity. Bandpass cavities reject populated sites, the 8608-2 cavity from ¼ -inch aluminum, and are
all frequencies outside a narrow filter provides greater selectivity heliarc welded to the cavity body at
pass band. These cavities reduce with minimum inser tion loss. the high current point for improved
transmitter sideband noise, and Multiple cavities can also provide conductivity and strength. This
also protect receivers against a wider passband when required. allows Telewave cavities to handle
desensitization. Mounting rails are provided for all up to 350 watts, depending on
multiple-cavity filters. insertion loss.
TWPC-8608 cavities cover 800-
970 MHz. All cavities are tuned Excellent frequency stability is Similar metals and alodined
to specified frequencies prior to achieved by the use of a specially aluminum help prevent galvanic
shipping, and no further adjustments mac hined comp en s ator and corrosion. Silver plated tuners
should be required. The positive Invar rod. The pass frequency is and beryllium copper finger stock
locking mechanism allows for quick temperature stable from -30°C provide non-corrosive low loss
field retuning if frequency changes to +70°C. Telewave Ground Loop contact, and ensure reliable, long-
become necessary. technology places the center term performance.
conductor of each coupling loop at
T h e s e c av i t i e s a l s o f e a t u r e
DC ground potential for lightning
calibrated adjustable coupling, and
protection and noise reduction.
insertion loss can be easily set from
All specifications subject
140 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5002 Rev. 8/09
 800 - 970 MHz

TWPC-8608-1,-2 5

CAVITIES & FILTERS

TYPICAL SELECTIVITY CHARACTERISTICS
Figure 1 - TWPC-8608-1 at 860 MHz Figure 2 - TWPC-8608-2 at 860 MHz
0 0

10 10
0.5 dB

20 1.0 dB
20
Attenuation in dB

30 2.0 dB
30
1.0 dB
40 40

50 50

60 60

70 70

-6 -4 -2 Fc +2 +4 +6 -6 -4 -2 Fc +2 +4 +6
Frequency (MHz)

MODEL TWPC-8608-1 TWPC-8608-2

Insertion loss (adjustable) 0.5 to 2.0 dB 1.0 to 4.0 dB
Attenuation See figure 1 See figure 2
Max size - tuners extended in. (cm) 8 x 15.375 (20.3 x 39.1) 8.25 x 19 x 15.375 (21 x 48.3 x 39.1)
Net weight lb. (kg) 7 (3.2) 17 (7.7)
Shipping weight lb. (kg) 10 (4.5) 22 (10)
COMMON SPECIFICATIONS
Tuning frequency range 800-970 MHz
Nominal impedance 50 ohms
VSWR at resonance (max) 1.5:1
Input power (max) vs. insertion loss 0.5 dB - 350 watts, 1 dB - 250 watts, 2 dB - 150 watts
Temperature range -30°C to +70°C
Cavity electrical length ¼ wavelength
Cavity size (Diam. x H) in. (cm) 8 x 11.875 (20.3 x 30.2)
Outer conductor, end plates 6061-T6 aluminum
Inner conductor, coupling loops Silver plated copper
Tuning rod Invar
Contactors, fingerstock Beryllium copper
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
NOTE: When ordering be sure to specify exact frequency and model number.
Contact the factory if additional information or assistance is required.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 141
TWDS-5002 Rev. 8/09
 40 - 960 MHz

TLF-50, -90, -90H, 150, 450, 760, 860

LOWPASS FILTERS

Te l e w a v e L o w p a s s F i l t e r s
eliminate harmonics, spurs, and
intermodulation products that
may occur above the fundamental
frequency of a transmitter. These
devices feature extremely low
insertion loss, and are designed
to be installed in the transmission
TLF-50
line continuously. The standard
connector configuration is N Female
to N Male. Other combinations are
available, including 7-16 DIN (extra
cost).

TYPICAL RESPONSE CURVE - TLF-150

TLF-90H
INSERTION LOSS
0

10
Attenuation in dB

20
RETURN LOSS REJECTION
30
40

50

60
70

80

1 144 174 288 348 400

150 300

Frequency (MHz)
Perforated Cover

SPECIFICATIONS TLF-50 TLF-90 TLF-90H TLF-150 TLF-450 TLF-760, 860

Frequency range (MHz) 40-54 88-108 88-108 144-174 406-512 763-824, 806-960
Impedance (nom.) 50 ohms
VSWR (max) 1.3:1
Power (max) 200 W 200 W 1000 W 400 W 200 W 200 W
Insertion loss 0.15 dB typ. / 0.25 dB max
Rejection at 2Fc (typ) 30 dB 40 dB 35 dB 40 dB 50 dB 45 dB
Dimensions (HWL) in. 1.25 x 1.5 x 4 1.625 x 2.5 x 4.5 1.25 x 1.5 x 4
Dimensions (HWL) cm 3.2 x 3.8 x 10.2 4.1 x 6.4 x 11.4 3.2 x 3.8 x 10.2
Weight lb. (kg) 0.5 (0.23) 1 (0.45) 0.5 (0.23)
Connectors Standard configuration is N-F to N-M for inline use. Any combination of N, UHF,
BNC, or 7-16 DIN male or female may be specified. (7-16 DIN is additional cost.)

All specifications subject

142 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5038 Rev. 10/12
 144 - 870 MHz

THF-150, 450, 760, 860

HIGHPASS FILTERS
5
Telewave Highpass Filters eliminate

CAVITIES & FILTERS

spurs and noise that may occur
below the fundamental frequency
of a transmitter. They are also used
to protect receivers from nearby
high power transmitters. These
devices feature extremely low
insertion loss, and are designed
to be installed in the transmission THF-150
line continuously. The standard
connector configuration is N Female
to N Male. Other combinations are
available, including 7-16 DIN (extra
cost).

TYPICAL RESPONSE CURVE - THF-150

INSERTION LOSS
0
10
Attenuation (dB)

20
30
REJECTION RETURN LOSS
40

50

60
70

80

10 88 108 144 174 250

Frequency (MHz)

SPECIFICATIONS THF-150 THF-450 THF-760 THF-860

Frequency range 144-174 MHz 450-470 MHz 763-869 MHz 850-870 MHz
Impedance (nom.) 50 ohms
VSWR (max) 1.3:1
Power (typ.) 25 watts continuous / 50 watts intermittent - Contact Telewave for higher power
Insertion loss 0.15 dB typ. / 0.25 dB max
Rejection (typ) at 1/2 Fc 50 dB 40 dB 10 dB 10 dB
Dimensions (HWL) in. (cm) 1.25 x 1.5 x 4 (3.2 x 3.8 x 10.2)
Weight lb. (kg) 0.5 (0.23)
Connectors Standard configuration is N-F to N-M for inline use. Any combination of N, UHF,
BNC, or 7-16 DIN male or female may be specified. (7-16 DIN is additional cost.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 143
TWDS-5039 Rev. 10/12
 50 - 150 MHz

TWX-50, 150
RECEIVER CRYSTAL FILTER

Telewave Crystal Filters provide

an extremely narrow bandpass for
a single frequency, to protect a
receiver from nearby transmitters
and adjacent channel interference.
This bandpass is much sharper than
a typical high “Q” cavity filter. TWX-50, 150

The combination of a crystal filter

and a Telewave TLA or TGA series
preamplifier can often rescue a
receiver that has been impacted
by an new adjacent transmitter, or
allow implementation of a system
with insufficient available frequency
spacing.
SIDE VIEW

TYPICAL RESPONSE

10
20
Attenuation in dB

30
40
50
60
70

-150 -50 Fc +50 +150

Frequency (KHz)

SPECIFICATIONS TWX-50 TWX-150

Frequency range 36-88 MHz 138-174 MHz
Attenuation ± 30 KHz (min) 20 dB 20 dB
Attenuation ± 50 KHz (min) 50 dB 60 dB
Insertion loss (typ) 4 dB 7 dB
Impedance / VSWR (max) 50 ohms / 1.2:1
Input level (max) 0 dBm
Temperature -20° to +70° C
Dimensions (HWL) in. (cm) 1 x 1 x 3.75 (2.5 x 2.5 x 9.5)
Weight lb. (kg) 0.5 (0.23)

All specifications subject

144 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-5037 Rev. 12/06
6 DUPLEXERS
 6 DUPLEXERS
Bandpass
Bandpass duplexers allow only a narrow band of
frequencies to reach the receiver or leave the transmitter.
All other frequencies are rejected. These duplexers
are the best available for crowded RF environments
where transmit and receive frequencies have significant
separation.

Pass - Reject
Pass / Reject duplexers offer a modified pass response for
a narrow band of frequencies, and also provide a tunable
notch which deepens the reject response at a particular
frequency. This type of filter supports closer frequency
spacing than a bandpass duplexer.

Bandpass / Bandreject
Bandpass / Bandreject duplexers provide a true bandpass
for a group of transmitters and receivers, with a tunable
notch which increases the reject response at a particular
frequency. These duplexers can also combine two
transmitters into one antenna.

Compact
Compact duplexers use specially designed Telewave
square cavity filters. The size and form factor of these
duplexers allows for more efficient use of rack space in
many installations.

Combline
Combline duplexers offer wide bandpass and sharp skirts
in a very compact package. The combline design also
exhibits very low insertion loss and can handle up to 650
watts of power.

Mobile
Mobile duplexers are very compact devices which use
helical resonators to provide a notchband response for a
transmitter and receiver. They are ideally suited for limited
space applications with one transmitter and one receiver.
 30 - 50 MHz

TPRD-0354, 0454
PASS / REJECT DUPLEXER
6
The Telewave TPRD-0354 and threaded Invar tuning rods assure

DUPLEXERS
TPRD-0454 allow the simultaneous maximum temperature stability,
operation of a transmitter and higher “Q”, and years of trouble
receiver into a common antenna. free operation.
These duplexers feature minimum
inser tion loss, and maximum
isolation between transmitter
and receiver. The Pass-Reject
TYPICAL RESPONSE
design combines a bandpass
0
response with a tunable notch at
the RX frequency for improved
performance at close spacing. 20
Attenuation in dB

The superior construc tion of

Telewave cavity duplexers allows
40
better rejection of transmitter
spurious radiation, providing
greater receiver protec tion.
60
Selec tivit y and inser tion loss TX-RX
are fully adjustable by rotating
the calibrated connector loops. 80
Telewave cavities are manufact-
ured with ¼” aluminum top plates, -0.4 -0.2 0 +0.2 +0.4
which are fully welded to the Frequency (MHz)
aluminum outer conductor. Silver
plated tuners, beryllium copper
f inger stock contac tors, and

ELECTRICAL SPECIFICATIONS TPRD-0354 TPRD-0454

Frequency coverage / tuning range 30-40 MHz / ± 2.5 MHz 40-50 MHz / ± 2.5 MHz
Frequency separation (min) 600 KHz
Maximum input power 350 watts
Insertion loss 1.0 dB (TX / RX to ant.)
RX isolation / TX noise suppression 80 dB at ±600 KHz
VSWR (max) 1.5:1
Temperature range 30°C to +60°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 88 x 19 x 11 (224 x 48 x 28) 72 x 19 x 11 (183 x 48 x 28)
Tuners fully extended in. (cm) 97 x 19 x 11 (246 x 48 x 28) 81 x 19 x 11 (206 x 48 x 28)
Cavities (4) - 5”
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 65 (29.5) 51 (23.2)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 147
TWDS-6007 Rev. 10/08
 30 - 50 MHz

TPRD-0384, 0484
PASS / REJECT DUPLEXER

The Telewave TPRD-0384 and tuners, beryllium copper finger

TPRD-0484 allow the simultaneous stock contactors, and threaded
operation of a transmitter and Invar tuning rods assure maximum
receiver into a common antenna. temperature stabilit y, higher
These duplexers feature minimum “Q”, and years of trouble free
inser tion loss, and maximum operation.
isolation between transmitter and
receiver. The Pass-Reject design
gives much better performance for
TYPICAL RESPONSE
close spacing than an equivalent
0
bandpass duplexer.
The superior construc tion of
20
Telewave cavity duplexers allows
better rejection of transmitter
Attenuation (dB)

spurious radiation, providing greater 40

receiver protection. Selectivity and
insertion loss are fully adjustable by
rotating the calibrated connector 60
loops.
Telewave cavities are manufactured 80
with ¼” aluminum top plates, which
are fully welded to the aluminum -.2 0 +.2 +.4
outer conductor. Silver plated Frequency (MHz)

ELECTRICAL SPECIFICATIONS TPRD-0384 TPRD-0484

Frequency coverage / tuning range 30-40 MHz / ± 2.5 MHz 40-50 MHz / ± 2.5 MHz
Frequency separation (min) 300 KHz
Maximum input power 350 watts
Insertion loss 1.0 dB (TX / RX to ant.)
RX isolation / TX noise suppression 80 dB at ±300 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +60°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 88 x 19 x 17 (224 x 48 x 43) 72 x 19 x 17 (183 x 49 x 43)
Tuners fully extended in. (cm) 97 x 19 x 17 (246 x 48 x 43) 81 x 19 x 17 (206 x 48 x 43)
Cavities (4) - 8”
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 105 (48) 86 (39)

All specifications subject

148 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6016 Rev. 10/08
 66 - 88 MHz

TPRD-0754
PASS / REJECT DUPLEXER
6
The Telewave TPRD-0754 allows tuners, beryllium copper finger

DUPLEXERS
the simultaneous operation of a stock contactors, and threaded
transmitter and receiver into a Invar tuning rods assure maximum
common antenna. This duplexer temperature stabilit y, higher
features minimum insertion loss, “Q”, and years of trouble free
and maximum isolation between operation.
transmitter and receiver. The Pass-
Reject design gives much better
performance for close spacing than TYPICAL RESPONSE
an equivalent bandpass duplexer. 0

The superior construc tion of

Telewave cavity duplexers allows 20
better rejection of transmitter
Attenuation (dB)

spurious radiation, providing greater

receiver protection. Selectivity and 40
insertion loss are fully adjustable by
rotating the calibrated connector
60
loops.
Telewave cavities are manufactured
80
with ¼” aluminum top plates, which
are fully welded to the aluminum
-0.6 Fo +0.6 +1.2
outer conductor. Silver plated
Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency coverage / tuning range 66-88 MHz
Frequency separation (min) 600 KHz
Maximum input power 350 watts
Insertion loss 1.2 dB (TX / RX to ant.)
RX isolation / TX noise suppression 80 dB at ±600 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +60°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 47 x 19 x 11 (119 x 48 x 28)
Tuners fully extended in. (cm) 54 x 19 x 11 (137 x 48 x 28)
Cavities (4) - 5”
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 40 (18.2)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 149
TWDS-6031 Rev. 11/12
 88 - 108 MHz

TPRD-1084
PASS-REJECT BASE STATION DUPLEXER

The Telewave TPRD-1084 Duplexer fully welded to the aluminum

allows simultaneous operation of outer conductor. As a result of their
a transmitter and receiver into a superior construction, Telewave 8”
common antenna. This Pass-Reject cavity duplexers achieve greater
duplexer is ideal for use in systems rejection of transmitter spurious and
requiring maximum isolation, with noise radiation, providing better
close frequency spacing down to receiver protection. Silver-plated
500 KHz. tuners, beryllium copper finger
stock contactors, and threaded Invar
The TPRD-1084 duplexer has
rods assure maximum temperature
two pass-rejec t cavities each
stability, higher “Q”, and many years
in the transmitter and receiver
of trouble-free operation.
sections. Selectivity and
insertion loss may be adjusted
by rotating the calibrated connector
loops. (See graphs for typical
response curves).
Telewave duplexers have ¼-inch
aluminum top plates which are

ELECTRICAL SPECIFICATIONS
Tuning range 88-108 MHz
Frequency separation (min) 500 KHz
Maximum input power 300 watts
Insertion loss TX / RX to ant. 1.5 dB
TYPICAL RESPONSE CURVES (TPRD-1084)
VSWR (max) 1.5:1 0

Temperature range -30°C to +70°C 10

RX isolation 80 dB at ±500 KHz
20
Attenuation in dB

TX noise suppression 80 dB at ±500 KHz

30
MECHANICAL SPECIFICATIONS
40
Cavities (4) - 8”
50
Mounting 19” Rack or wall mount
60
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel 70

Net weight lb. (kg) 37 (16.8) 80

Dimensions (HWD) in. 30 x 19 x 17 -.75 -.50 -.25 0 +.25 +.50

(cm) (76 x 48 x 43)
Frequency (MHz)
Tuners fully extended in. 35 x 19 x 17
(cm) (89 x 48 x 43)

All specifications subject

150 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6008 Rev. 10/12
 118 - 136 MHz

TPRD-1344C, 1344CM
COMPACT PASS / REJECT DUPLEXER
6
The TPRD-1344C and 1344CM

DUPLEXERS
produce high performance in
a compact design for the 118-
136 MHz VHF Air band. These
duplexers are only one-third of the
size of earlier models, and deliver
equivalent performance.
The TPRD-1344C/CM produces 70
dB isolation at 600 KHz, with a 350
watt power rating, and insertion
loss is 1.5 dB or less. Each duplexer
TPRD-1344C
fits a standard 19” rack, with rack
height of 5.25” and 4” respectively.
The TPRD-1344CM is supplied with TYPICAL RESPONSE
adjustable mounting tabs for instal- 0
lation in a cabinet.

20

Attenuation in dB 40

60

TPRD-1344CM
80
ELECTRICAL SPECIFICATIONS
600 KHz
Tuning range 118-136 MHz
Frequency separation (min) 600 KHz
Maximum input power 350 watts
Insertion loss TX/RX to ant. 1.5 dB
TX noise suppression at RX (typ) 70 dB at 600 KHz
RX isolation at TX (typ) 70 dB at 600 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Cavities (4) - 4”
MECHANICAL SPECIFICATIONS 1344C 1344CM
Mounting 19” Rack 19” Cabinet
Dimensions (HWD) in. (cm) 5.25 x 19 x 16 4 x 19 x 16
(Tuners fully extended) (13 x 48 x 41) (10 x 48 x 41)
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 21 (9.5)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 151
TWDS-6030 Rev. 10/12
 135 - 151 MHz

TPRD-1444C, 1444CM
COMPACT PASS / REJECT DUPLEXER

The TPRD-1444C and 1444CM

produce high performance in a
compact design for the 135-151
MHz VHF band. These duplexers are
only one-third of the size of earlier
models, and deliver equivalent
performance.
The TPRD-1444C/CM produces 70
dB isolation at 600 KHz, with a 350
watt power rating, and insertion
loss is 1.5 dB or less. Each duplexer
TPRD-1444C
fits a standard 19” rack, with rack
height of 5.25” and 4” respectively.
The TPRD-1444CM is supplied TYPICAL RESPONSE
with adjustable mounting tabs for 0
installation in a cabinet.

20
Attenuation in dB

40

60

TPRD-1444CM
80
ELECTRICAL SPECIFICATIONS
Tuning range 135-151 MHz 600 KHz
Frequency separation (min) 600 KHz
Maximum input power 350 watts
Insertion loss - TX / RX to ant. 1.5 dB
TX noise suppression at RX (typ) 70 dB at 600 KHz
RX isolation at TX (typ) 70 dB at 600 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities (4) - 4”
MECHANICAL SPECIFICATIONS 1444C 1444CM
Mounting 19” Rack 19” Cabinet
Dimensions (HWD) in. (cm) 5.25 x 19 x 16 4 x 19 x 16
(Tuners fully extended) 13 x 48 x 41 10 x 48 x 41
Connectors N or UHF female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 19.25 (8.7)

All specifications subject

152 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6005 Rev. 10/12
 135 - 151 MHz

TPRD-1446C
COMPACT PASS / REJECT DUPLEXER
6
The TPRD -1446C of fers high

DUPLEXERS
performance in a compact design
for the 135-151 MHz VHF band.
These duplexers are only one-third
of the size of earlier models, and
deliver equivalent performance.
Custom-extruded 4” cavities allow
horizontal rack mounting. Three
pass-reject sections for the transmit
and receive paths provide 80 dB
isolation at 500 KHz, with a 350
watt power rating, and insertion
loss of 2.5 dB or less. The duplexer
fits a standard 19” rack, with rack
height of 8.75”.
TYPICAL RESPONSE
0

20
Attenuation in dB

40

60

ELECTRICAL SPECIFICATIONS 80
Tuning range 135-151 MHz
Frequency separation (min) 500 KHz 500 KHz

Maximum input power 350 watts

Insertion loss TX / RX to ant. 2.5 dB
TX noise suppression at RX (typ) 80 dB at 500 KHz
RX isolation at TX (typ) 80 dB at 500 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities (6) - 4”
MECHANICAL SPECIFICATIONS
Mounting 19” Rack
Dimensions (HWD) in. (cm) 8.75 x 19 x 16
(Tuners fully extended) 22 x 48 x 40.6
Connectors N or UHF Female
Finish Gray acrylic enamel
Net weight lb. (kg) 37 (16.8)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 153
TWDS-6006 Rev. 10/12
 118 - 148 MHz

TPRD-1454, 1456
BANDPASS / REJECT DUPLEXERS

TPRD-1454 TPRD-1456

Telewave TPRD-1454 and TPRD- rejection of transmitter noise for easy field tuning by rotating the
1456 duplexers allow simultaneous and spurious radiation, providing threaded Invar rod.
operation of a transmitter and excellent receiver protection.
The optional TBC-40 indoor cabinet
receiver into a common antenna.
Telewave duplexers have ¼” completely encloses the duplexer,
These pass-reject duplexers are
aluminum top plates which are and protects it from dust, dirt
ideal for systems with very close
fully welded to the aluminum outer and tampering. All connections
frequency spacing.
conductor. Silver-plated tuners, are accessible from the top of the
The Telewave TPRD-1454 has two beryllium copper finger stock cabinet.
pass-reject cavities in the transmitter contactors and threaded Invar
and receiver sections. This duplexer rods assure maximum temperature
is designed for transmitters and stability, higher “Q”, and many years
receivers with frequency spacing of trouble free operation.
of 600 KHz or more.
Selectivity and insertion loss may be
The TPRD-1456 has three pass- adjusted by rotating the calibrated
reject cavities in the transmitter connector loops. (See next page for
and receiver sections. This duplexer typical response curves.)
is designed for transmitters and
All duplexers are tuned and
receivers with frequency spacing
tested with customer-specified
of 400 KHz or more.
frequencies prior to shipping. If
B e c a u s e o f t h e i r s u p e r i o r frequency changes are required, the
construction, these Telewave 5” positive locking mechanism allows
cavity duplexers achieve greater

All specifications subject

154 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6042 Rev. 8/12
 118 - 148 MHz

TPRD-1454, 1456 6

DUPLEXERS
TYPICAL DUPLEX RESPONSE
TPRD-1454 TPRD-1456
0 0

10 10

20 20

30 30
Attenuation in dB

40 40

50 50

60 60

70 70

80 80

90 90

100 100
600 KHz 400 KHz

ELECTRICAL SPECIFICATIONS TPRD-1454 TPRD-1456

Tuning range 118-148 MHz
Frequency separation (min) 600 KHz 400 KHz
Maximum input power 350 watts
VSWR (max) 1.5:1
Insertion loss: TX/RX to ant. 1.5 dB 2.0 dB
RX isolation at TX frequency 77 dB at 600 KHz 100 dB at 400 KHz
TX noise suppression at RX frequency 77 dB at 600 KHz 100 dB at 400 KHz
Temperature range -30°C to +70°C
Cavities (4) 5” (6) 5”
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 34 x 19 x 11 (86 x 48 x 28) 34 x 19 x 11 (86 x 48 x 28)
(Including typical tuner extension)
Cavity dimensions 5” dia x 30” L
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Acrylic enamel
Net weight lb. (kg) 23 (10.4) 35 (15.6)
NOTES: Specify model number and exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 155
TWDS-6042 Rev. 8/12
 118 - 148 MHz

TPRD-1484, 1486
PASS-REJECT BASE STATION DUPLEXERS

The Telewave TPRD-1484 and TPRD- Telewave duplexers have ¼-inch

1486 duplexers allow simultaneous aluminum top plates which are
operation of a transmitter and fully welded to the aluminum
receiver into a common antenna. outer conductor. As a result of their
These Pass-Reject duplexers are superior construction, Telewave 8”
ideal for use in systems requiring cavity duplexers achieve greater
maximum isolation, with close rejection of transmitter noise
frequency spacing down to 300 and spurious radiation, providing
KHz. excellent receiver protection.
The TPRD-1484 duplexer has Silver-plated tuners, beryllium
two, and TPRD-1486 duplexer copper finger stock contactors,
has three pass-reject cavities and threaded Invar rods assure
each in the transmit ter and maximum temperature stability, TPRD-1486
receiver sections. Selectivity and higher “Q”, and many years of
insertion loss may be adjusted trouble-free operation.
by rotating the calibrated connector
loops. (See graphs for typical
response curves).

ELECTRICAL SPECIFICATIONS TPRD-1484 TPRD-1486

Tuning range 118-148 MHz
Frequency separation (min) 500 KHz 300 KHz
Maximum input power 300 watts
TPRD-1484
Insertion loss TX / RX to ant. 1.5 dB 2.2 dB
VSWR (max) 1.5:1
Temperature range -30°C to +70°C TYPICAL RESPONSE CURVES (TPRD-1484)
0
RX isolation 80 dB at ±500 KHz 100 dB at ±400 KHz
10
TX noise suppression 80 dB at ±500 KHz 100 dB at ±400 KHz
20
MECHANICAL SPECIFICATIONS
Attenuation in dB

Cavities (4) - 8” (6) - 8” 30

Mounting 19” Rack or wall mount 40

Connectors N or UHF female (opt.) 50

Finish Gray acrylic enamel 60

Net weight lb. (kg) 37 (16.8) 51 (23.1) 70

Dimensions (HWD) in. 30 x 19 x 17 30 x 19 x 25
80
(cm) (76 x 48 x 43) (76 x 48 x 63.5)
Tuners fully extended in. 35 x 19 x 17 35 x 19 x 25 -.75 -.50 -.25 0 +.25 +.50

(cm) (89 x 48 x 43) (59 x 48 x 63.5) Frequency (MHz)

All specifications subject

156 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6040 Rev. 7/12
 148 - 174 MHz

TPRD-1544F
PASS-REJECT DUPLEXER
6

DUPLEXERS
TPRD-1544F with
TWX-5 spacers

The Telewave TPRD-1544F allows transmitter and receiver sections, stock contactors and threaded Invar
simultaneous operation of a for frequency spacing of 2 MHz or rods assure maximum temperature
transmitter and receiver into a more. Selectivity and insertion loss stability, and many years of trouble
common antenna. This pass-reject may be adjusted by rotating the free operation.
duplexer utilizes folded four-inch calibrated connector loops.
All duplexers are tuned and
cavities to achieve high “Q” in a
This duplexer is designed to mount tested with customer-specified
compact size.
horizontally on a 19” rack. Spacing frequencies prior to shipping. If
Telewave folded cavities utilize brackets are available to allow frequency changes are required,
a special construction technique mounting in a cabinet with 5” or the positive locking mechanism
and circuit design which allow a 8” depth from the front. allows for straightforward field
physically shorter cavity to produce tuning by rotating the threaded
Telewave duplexers feature cavities
nearly the same performance as a Invar rod.
with ¼” aluminum top plates, which
standard length cavity.
are fully welded to the aluminum
The TPRD-1544F duplexer uses two outer conductor. Silver-plated
folded pass-reject cavities in the tuners, beryllium copper finger

ELECTRICAL SPECIFICATIONS
Tuning range 148-174 MHz
Frequency separation (min) 2 MHz
Maximum input power 350 watts
Insertion loss TX / RX to ant. (typ.) 1.0 dB
TX noise suppression at RX (min) 80 dB at 2 MHz
RX isolation at TX (min) 80 dB at 2 MHz
VSWR (max) 1.5:1
Temperature range -30°C to +60°C
Number of cavities (4) - 4”
MECHANICAL SPECIFICATIONS
TYPICAL RESPONSE
Mounting 19” Rack mount
Dimensions (HWD) in. (cm) 5.25 x 19 x 17
(Tuners fully extended) (13.3 x 48.3 x 43.2)
Connectors N or UHF Female
Finish Gray acrylic enamel
Net weight lb. (kg) 15 (6.8)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 157
TWDS-6041 Rev. 4/10
 148 - 174 MHz

TPRD-1543C
COMPACT PASS / REJECT DUPLEXER

The TPRD-1543C produces high

performance in a compact design
for the 148-174 MHz VHF band. This
duplexer is less than 30% of the
size of earlier models, and delivers
equivalent performance.
Precise construction and high qual-
ity components results in excel-
lent temperature stability under
the most demanding conditions.
The duplexer fits a standard 19”
rack, with rack height of 5.25”. Each
duplexer is tuned and tested for
maximum performance prior to TYPICAL RESPONSE
0
shipping.

20

Attenuation in dB
40

60

80

ELECTRICAL SPECIFICATIONS 159.5 164.5 169.5

Tuning range 148-174 MHz Frequency (MHz)

Frequency separation (min) 5 MHz

Maximum input power 350 watts
Insertion loss TX / RX to ant. 1.5 dB
TX noise suppression at RX (typ) 90 dB
RX isolation at TX (typ) 50 dB
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities (3) - 4”
MECHANICAL SPECIFICATIONS
Mounting 19” Rack
Dimensions (HWD) in. 5.25 x 19 x 11.5
(tuning rods fully extended) in. 5.25 x 19 x 16.5
Connectors N or UHF female
Finish Acrylic enamel
Net weight lb. (kg) 15 lb.

All specifications subject

158 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6029 Rev. 10/12
 148 - 174 MHz

TPRD-1544C, 1544CM
COMPACT PASS / REJECT DUPLEXER
6
The TPRD-1544C and 1544CM

DUPLEXERS
produce high performance in a
compact design for the 148-174
MHz VHF band. These duplexers
are less than 30% of the size of
earlier models, and deliver greater
isolation and power handling.
The TPRD-1544C and CM produce
70 dB isolation at 600 KHz, with 350
watt power handling, and insertion
loss is 1.5 dB or less. Each duplexer
TPRD-1544C
fits a standard 19-inch rack, with rack
height of 5.25” and 4” respectively.
The TPRD-1544CM is supplied TYPICAL RESPONSE
with adjustable mounting tabs for 0
installation in a cabinet.

20

Attenuation in dB
40

60

TPRD-1544CM
80
ELECTRICAL SPECIFICATIONS
600 KHz
Tuning range 148-174 MHz
Frequency separation (min) 600 KHz
Maximum input power 350 watts
Insertion loss TX / RX to ant. 1.5 dB
TX noise suppression at RX (typ) 70 dB at 600 KHz
RX isolation at TX (typ) 70 dB at 600 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities (4) - 4”
MECHANICAL SPECIFICATIONS 1544C 1544CM
Mounting 19” Rack 19” Cabinet
Dimensions (HWD) in. (cm) 5.25 x 19 x 15 4 x 19 x 15
(tuning rods fully extended) (38.7 x 48 x 38.1) (10.2 x 48 x 38.1)
Connectors N or UHF female (opt.)
Finish Acrylic enamel
Net weight lb. (kg) 18.25 (8.3)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 159
TWDS-6001 Rev. 10/12
 148 - 174 MHz

TPRD-1546C
COMPACT PASS / REJECT DUPLEXER

The TPRD -1546C of fers high

performance in a compact design
for the 148-174 MHz VHF band.
Custom extruded 4” cavities allow
horizontal rack mounting. Three
pass-reject sections in the transmit
and receive paths provide 80 dB
isolation at 500 KHz, with a 350
watt power rating, and insertion
loss of 2.5 dB or less. The duplexer
fits a standard 19” rack, with rack
height of 8.75”.

TYPICAL RESPONSE
0

20
Attenuation in dB

40

60

ELECTRICAL SPECIFICATIONS 80

Tuning range 148-174 MHz

500 KHz
Frequency separation (min) 500 KHz
Maximum input power 350 watts
Insertion loss TX / RX to ant. 2.5 dB
TX noise suppression at RX (typ) 80 dB at 500 KHz
RX isolation at TX (typ) 80 dB at 500 KHz
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities (6) - 4”
MECHANICAL SPECIFICATIONS
Mounting 19” Rack mount
Dimensions (HWD) in. (cm) 8.75 x 19 x 15 (22 x 48 x 38)
Connectors N or UHF female
Finish Acrylic enamel
Net weight lb. (kg) 36 (16.3)

All specifications subject

160 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6004 Rev. 10/12
 148 - 174 MHz

TPCD-1553, 1554, 1556

VHF BANDPASS DUPLEXERS
6

DUPLEXERS
TPCD-1553 TPCD-1554 TPCD-1556

T h e Te l e w a v e T P C D -15 5 3 , contactors and threaded Invar The TPCD-1556 has three bandpass
TPCD -1554, and TPCD -1556 rods assure maximum temperature cavities in both the transmitter and
allow simultaneous operation of stability, higher “Q”, and many years
receiver sections. This duplexer
a transmitter and receiver into a of trouble free operation. is designed for transmitters and
common antenna. These bandpass receivers with spacing of 2 MHz or
Selectivity and insertion loss may be
duplexers are ideal in frequency more.
adjusted by rotating the calibrated
congested areas where protection
connector loops. (See next page for All duplexers are tuned and
is needed from surrounding
typical response curves.) tested with customer-specified
transmitters, and where maximum
frequencies prior to shipping. If
transmitter sideband filtering is The TPCD-1553 includes t wo
frequency changes are required, the
necessary. bandpass cavities in the transmitter
positive locking mechanism allows
section. It is recommended when
Because of their superior for easy field tuning by rotating the
f requenc y s pacing bet ween
construction, these Telewave 5” threaded Invar rod.
transmitter and receiver is 5 MHz
cavity duplexers achieve greater
or more.
rejection of transmitter noise
and spurious radiation, providing The TPCD-1554 has two bandpass
excellent receiver protection. cavities in both the transmitter and
Telewave duplexers have ¼” receiver sections. This duplexer
aluminum top plates which are is designed for transmitters and
fully welded to the aluminum outer receivers with a spacing of 4 MHz
conductor. Silver-plated tuners, or more.
beryllium copper finger stock
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 161
TWDS-6024 Rev. 8/12
 148 - 174 MHz

TPCD-1553, 1554, 1556

TYPICAL DUPLEX RESPONSE

TPCD-1553 TPCD-1554 TPCD-1556
0 0 0

10 10 10

20 20 20
Attenuation in dB

30 30 30

40 40 40

50 50 50

60 60 60

70 70 70

-2 Fo +2 +4 +6 -2 Fo +2 +4 +6 -4 -2 Fo +2 +4 +6
Frequency (MHz)

ELECTRICAL SPECIFICATIONS TPCD-1553 TPCD-1554 TPCD-1556

Tuning range 148-174 MHz
Cavities (3) - 5” (4) - 5” (6) - 5”
Frequency separation (min) 5 MHz 4 MHz 2 MHz
Maximum input power 350 watts
VSWR (max) 1.5:1
Insertion loss TX / RX to ant. 1.0 dB 1.0 dB 1.5 dB
RX isolation at TX 35 dB at 5 MHz 55 dB at 4 MHz 63 dB at 2 MHz
58 dB at 5 MHz 75 dB at 3 MHz
TX noise suppression at RX 62 dB at 5 MHz 58 dB at 4 MHz 66 dB at 2 MHz
63 dB at 5 MHz 77 dB at 3 MHz
Temperature range -30° C to +70° C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. 28 x 19 x 6 28 x 19 x 11 28 x 19 x 11
(Tuners fully extended) (cm) (71 x 48 x 15) (71 x 48 x 28) (71 x 48 x 28)
Connectors N or UHF Female
Finish Gray acrylic enamel
Net weight lb. (kg) 15 (7) 19 (8.6) 27 (12.3)
NOTES: Specify model number and exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.

All specifications subject

162 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6024 Rev. 8/12
 144 - 174 MHz

TPRD-1554, 1556
BANDPASS / REJECT DUPLEXERS
6

DUPLEXERS
TPRD-1554 TPRD-1556

Telewave TPRD-1554 and TPRD- rejection of transmitter noise for easy field tuning by rotating the
1556 duplexers allow simultaneous and spurious radiation, providing threaded Invar rod.
operation of a transmitter and excellent receiver protection.
The optional TBC- 40 indoor
receiver into a common antenna.
Telewave duplexers have ¼” cabinet completely encloses
These pass-reject duplexers are
aluminum top plates which are the duplexer, and protec ts it
ideal for systems with very close
fully welded to the aluminum outer from dust, dirt and tampering.
frequency spacing.
conductor. Silver-plated tuners, All connections are accessible
The Telewave TPRD-1554 has two beryllium copper finger stock from the top of the cabinet.
pass-reject cavities in the transmitter contactors and threaded Invar
and receiver sections. This duplexer rods assure maximum temperature
is designed for transmitters and stability, higher “Q”, and many years
receivers with frequency spacing of trouble free operation.
of 600 KHz or more.
Selectivity and insertion loss may be
The TPRD-1556 has three pass- adjusted by rotating the calibrated
reject cavities in the transmitter connector loops. (See next page for
and receiver sections. This duplexer typical response curves.)
is designed for transmitters and
All duplexers are tuned and
receivers with frequency spacing
tested with customer-specified
of 400 KHz or more.
frequencies prior to shipping. If
B e c a u s e o f t h e i r s u p e r i o r frequency changes are required, the
construction, these Telewave 5” positive locking mechanism allows
cavity duplexers achieve greater

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 163
TWDS-6025 Rev. 8/12
 144 - 174 MHz

TPRD-1554, 1556

TYPICAL DUPLEX RESPONSE

TPRD-1554 TPRD-1556
0 0

10 10

20 20

30 30
Attenuation in dB

40 40

50 50

60 60

70 70

80 80

90 90

100 100
600 KHz 400 KHz

ELECTRICAL SPECIFICATIONS TPRD-1554 TPRD-1556

Tuning range 144-174 MHz
Frequency separation (min) 600 KHz 400 KHz
Maximum input power 350 watts
VSWR (max) 1.5:1
Insertion loss: TX/RX to ant. 1.5 dB 2.0 dB
RX isolation at TX frequency 77 dB at 600 KHz 100 dB at 400 KHz
TX noise suppression at RX frequency 77 dB at 600 KHz 100 dB at 400 KHz
Temperature range -30°C to +70°C
Cavities (4) 5” (6) 5”
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 28 x 19 x 11 (71.1 x 48 x 28) 28 x 19 x 11 (71.1 x 48 x 28)
(Including typical tuner extension)
Cavity dimensions 5” dia x 23” L
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Acrylic enamel
Net weight lb. (kg) 19 (8.6) 27 (12.3)
NOTES: Specify model number and exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.
All specifications subject
164 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6025 Rev. 8/12
 148 - 174 MHz

TPRD-1566
BANDPASS - BANDREJECT DUAL NOTCH DUPLEXER
6

DUPLEXERS
The Telewave TPRD-1566 allows rejection of transmitter noise The optional TBC-40 indoor cabinet
simultaneous operation of a and spurious radiation, providing completely encloses the duplexer,
transmitter and receiver into a excellent receiver protection. and protects it from dust, dirt
common antenna. This pass/reject and tampering. All connections
Telewave duplexers have ¼”
duplexer has low insertion loss, are accessible from the top of the
aluminum top plates which are
and is ideal for systems with close cabinet.
fully welded to the aluminum outer
frequency separation.
conductor. Silver-plated tuners,
The TPRD-1566 has three pass/ beryllium copper finger stock
reject cavities in both the transmitter contactors and threaded Invar
and receiver sections. This duplexer rods assure maximum temperature
is designed for transmitters and stability, higher “Q”, and many years
receivers with frequency spacing of trouble free operation.
of 300 KHz or more. Selectivity and
All duplexers are tuned and
insertion loss may be adjusted by
tested with customer-specified
rotating the calibrated connector
frequencies prior to shipping. If
loops. (See next page for typical
frequency changes are required, the
response curves.)
positive locking mechanism allows
B e c a u s e o f t h e i r s u p e r i o r for easy field tuning by rotating the
construction, these Telewave 6” threaded Invar rod.
cavity duplexers achieve greater

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 165
TWDS-6037 Rev. 8/12
 148 - 174 MHz

TPRD-1566

TYPICAL DUPLEX RESPONSE

TPRD-1566 1.0 dB Insertion Loss TPRD-1566 2.0 dB Insertion Loss
0 0
20 20
Attenuation in dB

40 40
60 60
80 80
100 100
120 120

-.500 -.250 0 +.250 +.500 -.500 -.250 0 +.250 +.500

Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Tuning range 148-174 MHz
Number of cavities (6) - 6”
Frequency separation (min) 300 KHz
Maximum input power 350 watts
VSWR (max) 1.5:1
RX isolation at TX frequency 100 dB at 500 KHz Insertion loss - 1.0 dB
TX noise suppression at RX 100 dB at 500 KHz Insertion loss - 1.0 dB
RX isolation at TX frequency 115 dB at 500 KHz Insertion loss - 2.0 dB
TX noise suppression at RX 115 dB at 500 KHz Insertion loss - 2.0 dB
Temperature range -30° C to +70° C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 23 x 19 x 14 (58.4 x 48.3 x 35.6)
Tuners fully extended in. (cm) 28 x 19 x 14 (71 x 48.3 x 35.6)
Connectors N or UHF Female (opt.)
Finish Gray acrylic enamel
Net weight lb. (kg) 55 (25)
NOTES: Specify model number and exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.
All specifications subject
166 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6037 Rev. 8/12
 148 - 174 MHz

TPRD-1584, 1586
PASS-REJECT BASE STATION DUPLEXER
6
Telewave models TPRD-1584 and A s a result of their superior

DUPLEXERS
TPRD-1586 allow simultaneous construction, Telewave 8” cavity
operation of a transmitter and duplexers achieve greater rejection
receiver into a common antenna. of transmitter noise and spurious
These Pass-Reject duplexers are an radiation, providing excellent
ideal choice for systems requiring receiver protection.
maximum isolation, with close
Silver-plated tuners, beryllium
frequency spacing down to 300
copper finger stock contactors,
KHz.
and threaded Invar rods assure
The TPRD-1584 has two, and the maximum temperature stability,
TPRD-1586 has three Pass-Reject higher “Q”, and many years of
cavities each in the transmitter and trouble-free operation.
receiver sections. Selectivity and
insertion loss may be adjusted by
rotating the calibrated connector
TPRD-1586
loops. (See graph for t ypical
response curves.)
Telewave duplexers have ¼-inch
aluminum top plates which are
fully welded to the aluminum outer
conductor.

ELECTRICAL SPECIFICATIONS TPRD-1584 TPRD-1586

Tuning range 148-174 MHz
Frequency separation (min) 500 KHz 300 KHz
Maximum input power 350 watts
Insertion loss TX / RX to ant. 1.5 dB 2.2 dB
TPRD-1584
VSWR (max) 1.5:1
Temperature range -30°C to +70°C TYPICAL RESPONSE (TPRD-1584)
0
RX isolation 80 dB at ±500 KHz 100 dB at ±400 KHz
10
TX noise suppression 80 dB at ±500 KHz 100 dB at ±400 KHz
Attenuation in dB

MECHANICAL SPECIFICATIONS 20

Cavities (4) - 8” (6) - 8” 30

Mounting 19” Rack mount 40

Connectors N or UHF female (opt.) 50

Finish Gray acrylic enamel 60

Net weight lb. (kg) 33 (15) 46.5 (21)
70
Dimensions (HWD) in. 23.5 x 19 x 17 23.5 x 19 x 25
(cm) (60 x 48 x 43) (60 x 48 x 63.5) 80

Tuners fully extended in. 28 x 19 x 17 28 x 19 x 25 -.75 -.50 -.25 0 +.25 +.50

(cm) (71 x 48 x 43) (71 x 48 x 63.5)
Frequency (MHz)
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 167
TWDS-6039 Rev. 7/12
 200 - 300 MHz

TPRD-2254
BANDPASS / REJECT DUPLEXER

The Telewave TPRD-2254 allows rods assure maximum temperature

simultaneous operation of a stability, higher “Q”, and many years
transmitter and receiver into a of trouble free operation.
common antenna. This pass-reject
All duplexers are tuned and
duplexer has low insertion loss,
tested with customer-specified
and is ideal for systems with close
frequencies prior to shipping. If
frequency separation.
frequency changes are required, the
The TPRD-2254 has two pass- positive locking mechanism allows
reject cavities in the transmitter for easy field tuning by rotating the
and receiver sections. This duplexer threaded Invar rod.
is designed for transmitters and
The optional TBC-40 indoor cabinet
receivers with frequency spacing
completely encloses the duplexer,
of 1 MHz or more. Selectivity and
and protects it from dust, dirt
insertion loss may be adjusted by
and tampering. All connections
rotating the calibrated connector
are accessible from the top of the
loops.
cabinet.
Telewave duplexers have ¼” TPRD-2254
aluminum top plates which are
fully welded to the aluminum outer
conductor. Silver-plated tuners,
beryllium copper finger stock
contactors and threaded Invar

ELECTRICAL SPECIFICATIONS
Tuning range 200-300 MHz
Frequency separation (min) 1 MHz
Maximum input power 350 watts
Insertion loss TX / RX to ant. 1.0 dB TYPICAL DUPLEX RESPONSE
0
TX noise suppression at RX (min) 84 dB at 1.5 MHz
1.0 dB I.L. 1.0 dB I.L.
at 223.1 MHz at 224.7 MHz
RX isolation at TX (min) 85 dB at 1.5 MHz 10

VSWR (max) 1.5:1 20

Attenuation in dB

Temperature range -30°C to +70°C

30
Number of cavities (4) - 5”
40
MECHANICAL SPECIFICATIONS
50
Mounting 19” Rack mount Tx-Rx

Dimensions (HWD) in. (cm) 23 x 19 x 11 (58 x 48 x 28) 60

(Tuners fully extended)
70
Cavity dimensions 5” dia x 18” L
80
Connectors N or UHF Female
Finish Gray acrylic enamel Fo +1.0 +2.0
Net weight lb. (kg) 17 (7.7) Frequency (MHz)
NOTES: Specify exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.
All specifications subject
168 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6026 Rev. 9/12
 400 - 512 MHz

TPCD-4554, 4556
UHF BANDPASS DUPLEXERS
6

DUPLEXERS
TPCD-4554 TPCD-4556

The Telewave TPCD-4554 and These duplexers are designed for If frequency changes are required,
TPCD - 4556 duplexer s allow transmitters and receivers with the positive locking mechanism
simultaneous operation of a frequency spacing of 5 MHz or allows for easy field tuning by
transmitter and receiver into a more. rotating the threaded Invar rod.
common antenna. These bandpass
Selectivity and insertion loss may be
duplexers have low insertion loss,
adjusted by rotating the calibrated
and are ideal in frequency congested
connector loops. (See next page for
areas where protection is needed
typical response curves.)
from surrounding transmitters,
and where maximum transmitter Telewave duplexers have ¼-inch
sideband filtering is necessary. aluminum top plates which are
fully welded to the aluminum outer
Because of their superior
conductor. Silver-plated tuners,
construction, these Telewave 5”
beryllium copper finger stock
cavity duplexers achieve greater
contactors and threaded Invar
rejection of transmitter noise
rods assure maximum temperature
and spurious radiation, providing
stability, higher “Q”, and many years
excellent receiver protection.
of trouble free operation.
The TPCD-4554 has two, and
All duplexers are tuned and tested
the TPCD-4556 has three, ¾ -
with customer-specified frequencies
wave bandpass cavities in the
prior to shipping.
transmitter and receiver sections.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 169
TWDS-6019 Rev. 8/12
 400 - 512 MHz

TPCD-4554, 4556

TYPICAL DUPLEX RESPONSE

TPCD-4554 TPCD-4556
0 0

10 10

20 20

30 30
Attenuation in dB

40 40

50 50

60 60

70 70

80 80

-1 0 +1 +2 +3 +4 +5 +6 -4 -2 0 +2 +4 +6 +8
Frequency (MHz)

ELECTRICAL SPECIFICATIONS TPCD-4554 TPCD-4556

Tuning range 400-512 MHz
Number of cavities (4) - 5” (6) - 5”
Frequency separation (min) 5 MHz
Maximum input power 350 watts
VSWR (max) 1.5:1
Insertion loss TX / RX to ant. 1.0 dB 1.5 dB
RX isolation at TX frequency 50 dB at 5 MHz 75 dB at 5 MHz
TX noise suppression at RX frequency 52 dB at 5 MHz 75 dB at 5 MHz
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 28 x 19 x 11 (74 x 48 x 28)
(Tuners fully extended)
Connectors N or UHF female
Finish Gray acrylic enamel
Net weight lb. (kg) 19 (8.6) 27 (12.3)
NOTES: Specify exact transmitter and receiver frequencies when ordering.
All models are built on 19” rails for rack or wall mounting.
All specifications subject
170 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6019 Rev. 8/12
 400 - 512 MHz

TPRD-4544, 4744
PASS / REJECT DUPLEXER
6
The Telewave TPRD-4544/4744

DUPLEXERS
Base Station duplexers provide high
performance with an innovative
design. By using two TPRC-4504
or 4704 Pass / Reject cavities in the
transmitter and receiver path, these
duplexers provide maximum TX to
RX protection in the most severe
RF environments.
The design of these duplexers
provides a bandpass characteristic
with minimum insertion loss, while
also providing maximum TX to RX
protection. Adjustable coupling
optimizes the required attenuation
for ideal RX performance. All cavity
inputs are electrically shorted to
ground for maximum static and
noise protection.
RG-214 Mil-Spec cable is used TPRD-4544/4744 duplexers mount
for all interconnections to ensure on a 19” standard rack, with panel
long life, and lowest insertion loss height of 5.25”. Power handling
with maximum power handling is 250 watts. Receiver desense
capability. Heavy-duty materials protection is at least 90 dB, and
are used in construction of these TX sideband suppression is at least
duplexers, including silver-plated 75 dB.
tuners and ber yllium copper
With TX to RX spacing of 3 MHz
fingerstock contactors, assuring
or more, this duplexer can also
high “Q” performance with no
combine two transmitters into one
problems due to dissimilar metals.
antenna, or feed two receivers. For
Tuning is simple and remains stable
spacing less than 3 MHz, please
from -30°C to +70°C, thanks to the
contact Telewave for assistance.
threaded Invar rod.
All duplexers are tuned and
tested with customer-specified
frequencies prior to shipping. No
further adjustments should be
required.
The positive locking mechanism
allows for simple field tuning if
frequency changes are required.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 171
TWDS-6014 Rev. 9/07
 400 - 512 MHz

TPRD-4544, 4744

TPRD-4544 RESPONSE TPRD-4744 RESPONSE

AT 5 MHz SEPARATION AT 3 MHz SEPARATION

0 0
10 10
20 20
Attenuation in dB

30 30
40 40
50 50
60 Low Pass
to
60
High Pass Low Pass
70 70 to
High Pass
80 80

-1 0 +1 +2 +3 +4 +5 +6 -1 -2 0 +1 +2 +3 +4 +5
Frequency (MHz)

SPECIFICATIONS TPRD-4544 TPRD-4744

Frequency range 400-470 MHz 470-512 MHz
TX / RX separation (min) 5 MHz 3 MHz
ELECTRICAL SPECIFICATIONS
Maximum input power 250 watts
Insertion loss (TX & RX to Antenna) 1.0 dB
TX noise suppression at RX frequency 90 dB
RX attenuation at TX frequency 90 dB
Isolation TX to RX (min) 5 MHz separation 75 dB
3 MHz separation 60 dB
VSWR (max) 1.5:1
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Number of cavities (4) - 4” Dia. x 8” L
Dimensions (HWD) in. (cm) 5.25 x 19 x 12 (13.3 x 48 x 30.5)
Mounting 19” Panel
Connector termination N Female
Finish Gray acrylic enamel
Net weight lb. (kg) 10 (4.5)
Shipping weight lb. (kg) 15 (6.8)
NOTE: Exact transmitter and receiver frequencies must be specified when ordering.
All specifications subject
172 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6014 Rev. 9/07
 400 - 512 MHz

TPRD-4546
UHF BANDPASS / BANDREJECT DUPLEXER
6

DUPLEXERS
The Telewave TPRD-4546 UHF Heav y-dut y materials are
duplexer allows simultaneous used throughout to insure top
operation of a transmitter or performance and long service.
combiner and receiver into a Each cavity is constructed with a
common antenna. This band-pass/ ¼" aluminum top plate which is fully
band-reject duplexer provides welded to the cavity body.
maximum TX-to-RX isolation with
RG-214 Mil-Spec cable is used for
minimum insertion loss. Six 4”
the interconnect, and temperature
high “Q” cavities in a pass/reject
stability is maintained by the use of
configuration provide bet ter
a threaded Invar tuning rod. Tuners
isolation with close frequency
are all silver-plated, and sliding
spacing than an equivalent
contacts are manufactured from
bandpass-only duplexer.
beryllium copper fingerstock.
The TPRD - 4546 can also be
The TPRD-4546 is rack mounted
configured for at least 1.2 MHz pass
on a 7” x 19” panel. Selectivity and
and reject bandwidth with rated
insertion loss are adjustable as
attenuation.
required. All duplexers are tuned
The superior construc tion of and tested with customer specified
Telewave duplexers allows the frequencies prior to shipping, and
highest possible rejec tion of no further adjustment should be
transmitter spurious radiation required before installation.
and noise, providing maximum
protection for the receiver system.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 173
TWDS-6020 Rev. 10/08
 400 - 512 MHz

TPRD-4546

TYPICAL RESPONSE
0
10
20
Attenuation in dB

30
40
50
60
70
80

-10.0 Fo +10.0
Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 400-512 MHz
Frequency separation (min) 3 MHz
Pass / reject bandwidth (typ) 1.2 MHz
Maximum input power 250 watts
Insertion loss at pass band (TX and RX) 1.75 dB typ. / 2.0 dB max
TX attenuation at RX band (typ) 95 dB
RX attenuation at TX Band (typ) 95 dB
TX to RX Attenuation at 3 MHz (min) 85 dB
TX to RX Attenuation at 5 MHz (min) 90 dB
Impedance / VSWR (max) 50 ohms / 1.5:1
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Number of cavities (6) - 4” Dia. x 8” L
Dimensions (HWD) in. (cm) 7 x 19 x 11 (17.8 x 48.3 x 28)
Mounting 19” Panel
Connectors N Female
Panel finish Clear alodine
Cavity finish Gray enamel
Net weight lb. (kg) 16 (7.3)
Shipping weight lb. (kg) 19.5 (8.9)
NOTE: Exact transmitter and receiver frequencies must be specified when ordering.
All specifications subject
174 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6020 Rev. 10/08
 400 - 512 MHz

TPRD-4554, 4556
PASS / REJECT DUPLEXERS
6

DUPLEXERS
TPRD-4554 TPRD-4556

Telewave TPRD-4554 and TPRD- Telewave duplexers have ¼” The optional TBC-40 indoor cabinet
4556 duplexers allow simultaneous aluminum top plates which are completely encloses the duplexer,
operation of a transmitter and fully welded to the aluminum outer and protects it from dust, dirt
receiver into a common antenna. conductor. Silver-plated tuners, and tampering. All connections
These pass-reject duplexers are beryllium copper finger stock are accessible from the top of the
ideal for systems with very close contactors and threaded Invar cabinet.
frequency spacing of 1 MHz or rods assure maximum temperature
more. stability, higher “Q”, and many years
of trouble free operation.
The Telewave TPRD-4554 has two
¾-wave pass-reject cavities in the Selectivity and insertion loss may be
transmitter and receiver sections. adjusted by rotating the calibrated
The TPRD-4556 has three ¾-wave connector loops. (See next page for
pass-reject cavities in the transmitter typical response curves.)
and receiver sections for additional
All duplexers are tuned and
isolation.
tested with customer-specified
Because of their superior frequencies prior to shipping. If
construction, these Telewave 5” frequency changes are required, the
cavity duplexers achieve greater positive locking mechanism allows
rejection of transmitter noise for easy field tuning by rotating the
and spurious radiation, providing threaded Invar rod.
excellent receiver protection.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 175
TWDS-6035 Rev. 8/12
 400 - 512 MHz

TPRD-4554, 4556

TYPICAL DUPLEX RESPONSE

TPRD-4554 TPRD-4556
0 0

10 10

20 20

30 30
Attenuation in dB

40 40

50 50

60 60

70 70

80 80

90 90

100 100
1 MHz 1 MHz

ELECTRICAL SPECIFICATIONS TPRD-4554 TPRD-4556

Tuning range 400-512 MHz
Frequency separation (min) 1 MHz
Maximum input power 350 watts
VSWR (max) 1.5:1
Insertion loss TX/RX to ant. 1.5 dB 2.3 dB
RX isolation at TX frequency 80 dB at 1 MHz 95 dB at 1 MHz
TX noise suppression at RX frequency 80 dB at 1 MHz 95 dB at 1 MHz
Temperature range -30°C to +70°C
Cavities (4) 5” (6) 5”
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 28 x 19 x 11 28 x 19 x 11
(Tuners fully extended) (71.1 x 48 x 28) (71.1 x 48 x 28)
Mounting 19” Rack or wall mount
Connectors N or UHF female (opt.)
Finish Acrylic enamel
Net weight lb. (kg) 19 (8.6) 27 (12.3)
Specify model number and exact transmitter and receiver frequencies when ordering.
All specifications subject
176 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6035 Rev. 8/12
 763 - 869 MHz

TTPD-7644
BANDPASS / BANDREJECT DUPLEXER
6

DUPLEXERS
The Telewave TTPD-7644 Base finger stock contactors assure long
Station Duplexer is designed life, high “Q” performance, and
specifically for the 763-869 MHz mechanical stability.
Public Safety frequency band. Four
Solid copper semi-rigid cable
Bandpass / Band-Reject cavities
and non-ferromagnetic materials
utilize an exclusive Telewave
virtually eliminate internal intermod
coupling technique to provide a true
generation.
bandpass response, while rejecting
a specified frequency band. A threaded Invar tuning rod and
temperature compensator provide
Maximum transmitter-to-receiver
frequency stability across the full
protection is achieved across the
temperature range. All cavity inputs
full transmitter and receiver bands,
are heavily grounded for greatest
with very low insertion loss.
static and lightning protection.
The TTPD-7644 is a compact, rack
All duplexers are tuned and
mounted duplexer on a 5.25” x
tested with customer-specified
19” panel, with a power rating of
frequencies prior to shipping.
650 watts. Heavy duty materials
No further adjustments should
including ¼-inch top and bottom
be required. The positive locking
plates add to the rugged design of
mechanism makes field-tuning
this duplexer.
simple if frequency changes are
All connectors and tuners are necessary.
silver-plated, and beryllium copper
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 177
TWDS-6034 Rev. 10/12
 763 - 869 MHz

TTPD-7644

TYPICAL DUPLEX RESPONSE

0
10
20
Attenuation in dB

30
40
50
60
70
80
90
100

763 Fc 869
Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 763-869 MHz
Frequency separation (min) 30 MHz (764-806 MHz) / 45 MHz (806-869 MHz)
Maximum input power 650 watts
TX or RX pass bandwidth 5 MHz
Insertion loss at pass bandwidth
TX (high frequency) 0.5 dB max / 0.35 dB (typ)
RX (low frequency) 0.7 dB max / 0.5 dB (typ)
TX attenuation at RX band (min) 90 dB
RX attenuation at TX band (min) 90 dB
TX-to-RX attenuation (min) 80 dB
VSWR, ref. to 50 ohms (max) 1.5:1
Temperature range -30°C to +70°C
Number of cavities 4
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 5.25 x 19 x 11 (13 x 48 x 28)
Mounting 19” Panel
Connectors N Female
Finish Acrylic enamel
Net weight lbs (kg) 8.25 (3.7)
Shipping weight lbs (kg) 13 (5.9)
Specify exact transmitter and receiver frequencies when ordering.
All specifications subject
178 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6034 Rev. 10/12
 806 - 960 MHz

TTPD-8642, TTPD-8644
BANDPASS / BAND-REJECT DUPLEXERS
6

DUPLEXERS
TTPD-8642

TTPD-8644

The Telewave TTPD-8642 and All connectors and tuners are be required. The positive locking
TTPD-8644 Base Station duplexers silver-plated, and beryllium copper mechanism makes field-tuning
are designed for the 806-960 MHz finger stock contactors assure long simple if frequency changes are
frequency band. Bandpass / Band- life, high “Q” performance, and necessary.
Reject cavities utilize an exclusive mechanical stability.
Telewave coupling technique to
Solid copper semi-rigid cable
provide a true bandpass response,
and non-ferromagnetic materials
while rejecting a specified frequency
virtually eliminate internal intermod
band.
generation
Maximum transmitter-to-receiver
A threaded Invar tuning rod and
protection is achieved across the
temperature compensator provide
full transmitter and receiver bands,
frequency stability across the full
with very low insertion loss.
temperature range. All cavity inputs
The TTPD-8642 and TTPD-8644 are are heavily grounded for greatest
compact, rack mounted duplexers static and lightning protection.
on a 5.25” x 19” panel, with a power
All duplexers are tuned and
rating of 350 and 650 watts. Heavy
tested with customer-specified
duty materials which include ¼-inch
frequencies prior to shipping.
top and bottom plates add to the
No further adjustments should
rugged design of these duplexers.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 179
TWDS-6018 Rev. 10/12
 806 - 960 MHz

TTPD-8642, TTPD-8644

TYPICAL DUPLEX RESPONSE

TTPD-8642 TTPD-8644
0

10
0
10 5 MHz
5 MHz
Attenuation in dB

20
20
30 30
40
40
50
50
60
60 70
80
70
90
80
100

800 820 840 860 880 806 Fc 896

Frequency (MHz)

ELECTRICAL SPECIFICATIONS TTPD-8642 TTPD-8644

Frequency range 806-960 MHz
Frequency separation (min) 45 MHz
Maximum input power 350 watts 650 watts
TX or RX pass bandwidth 5 MHz
Insertion loss (TX/RX to ant., typ) 0.5 dB 0.5 dB
TX (high frequency) 0.5 dB max / 0.35 dB typ.
RX (low frequency) 0.7 dB max / 0.5 dB typ.
TX noise suppression at RX (min) 70 dB 85 dB
RX attenuation at TX (min) 70 dB 85 dB
TX-RX isolation at 45 MHz (min) 70 dB 85 dB
TX-to-RX attenuation (min) 75 dB
VSWR (max) 1.5:1
Impedance 50 ohms
Temperature range -30°C to +70°C
Number of cavities 2 4
MECHANICAL SPECIFICATIONS
Cavity diameter in. (cm) 4 (10)
Dimensions (HWD) in. (cm) 5.25 x 19 x 8.5 (13 x 48 x 22)
Mounting 19” Panel
Connectors N Female
Finish Acrylic enamel
Net weight lb. (kg) 4 (1.8) 8.25 (3.7)
Shipping weight lb. (kg) 7 (3.2) 13 (5.9)

All specifications subject

180 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6018 Rev. 10/12
 763 - 869 MHz

TPRD-8644
PASS/REJECT DUPLEXER
6

DUPLEXERS
The Telewave TPRD-8644 Base performance with no problems due The TPRD-8644 mounts on a 19”
Station Duplexer provides high to dissimilar metals. Heliarc welded standard rack, with panel height of
performance and high reliability top and bottom plates ensure 5.25”. Power handling is 250 watts.
for the 760 or 860 MHz Public reliable, noise-free operation. Receiver desense protection is
Safety and trunking bands. This Tuning is simple and remains stable at least 80 dB, and TX sideband
duplexer can be easily reconfigured from -30º C to +70º C, thanks to the suppression is at least 80 dB.
for transition from one band to the threaded Invar tuning rod.
With T X to R X spacing of 5
other. With two Pass/Reject cavities
Adjustable coupling optimizes MHz or more, this duplexer can
in each transmitter and receiver
the required attenuation for ideal combine two transmitters into one
path, these duplexers provide
RX performance. All cavity inputs antenna, or feed two receivers. For
maximum TX to RX protection in
are electrically shorted to ground spacing less then 5 MHz, please
dense RF environments.
for maximum static and noise contact Telewave for additional
Mil-Spec semi-rigid cable is used protection. information.
for all interconnections to ensure
All duplexers are tuned and
long life, and lowest insertion loss
tested with customer-specified
with maximum power handling
frequencies prior to shipping.
capability
No further adjustments should
Heavy-duty materials are used be required. The positive locking
in construction of this duplexer, mechanism allows for easy field
including silver-plated tuners and tuning if frequency changes are
ber yllium copper fingerstock implemented.
contactors, assuring high “Q”
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 181
TWDS-6033 Rev. 9/08
 763 - 869 MHz

TPRD-8644

TYPICAL RESPONSE
0

15

30

45
Attenuation in dB

60

75
Tx-Rx

90

105

800 810 820 830 840 850 860 870 880

Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 763-869 MHz
Frequency separation (min) 30 MHz (764-806 MHz) / 45 MHz (806-869 MHz)
Maximum input power 250 watts
Insertion loss (TX/RX to ant., typ) 1.0 dB
TX noise suppression at RX (min) 80 dB
RX attenuation at TX (min) 80 dB
TX-RX isolation for 5 MHz separation (min) 70 dB
VSWR (max) 1.5:1
Impedance 50 ohms
Temperature range -30°C to +70°C
Number of cavities 4
MECHANICAL SPECIFICATIONS
Cavity diameter in. (cm) 4 (10)
Dimensions (HWD) in. (cm) 5.25 x 19 x 10.5 (13 x 48 x 26.67)
Mounting 19” Panel
Connectors N Female
Finish Acrylic enamel
Net weight lb. (kg) 21 (9.6)
Shipping weight lb. (kg) 26 (11.8)
Specify exact transmitter and receiver frequencies when ordering.
All specifications subject
182 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6033 Rev. 9/08
 890 - 960 MHz

TPRD-9044
PASS/REJECT DUPLEXER
6

DUPLEXERS
The Telewave TPRD-9044 Base Adjustable coupling optimizes or feed two receivers. Typical
Station Duplexer provides high the required attenuation for ideal spacing is 39 MHz. Alternate
performance and high reliability RX performance. All cavity inputs spacing of 3.6 MHz, 9 MHz or other
for 900 MHz radio systems. With are electrically shorted to ground is also available. Frequencies and
two Pass/Reject cavities in each for maximum static and noise required spacing must be specified
transmitter and re ceiv er path, protection. with all orders.
these duplexers provide maximum
All duplexers are tuned and
TX to RX protection in dense RF
tested with customer-specified
environments.
frequencies prior to shipping.
Mil-Spec semi-rigid cable is used No further adjustments should
for all interconnections to ensure be required. The positive locking
long life, and lowest insertion loss mechanism allows for easy field
with maximum power handling tuning if frequency changes are
capability. implemented.
Heavy-duty materials are used The TPRD-9044 mounts on a 19”
in construction of this duplexer, standard rack, with panel height of
including silver-plated tuners and 5.25”. Power handling is 250 watts.
ber yllium copper fingerstock Receiver desense protection is
contactors, assuring high “Q” at least 80 dB, and TX sideband
performance with no problems suppression is at least 80 dB.
due to dissimilar metals. Tuning is
With TX to RX spacing of 5 MHz or
simple and remains stable from -30º
more, this duplexer can combine
C to +70º C, thanks to the threaded
two transmitters into one antenna,
Invar tuning rod.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 183
TWDS-6010 Rev. 11/06
 890 - 960 MHz

TPRD-9044

TYPICAL RESPONSE
0
10
20
30
Attenuation in dB

40
80
60
70
80

890 Fc 960
Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 890-960 MHz
Frequency separation (typ. / min) 39 MHz / 3.6 MHz
Maximum input power 250 watts
Insertion loss (TX/RX to ant., typ) 1.0 dB
TX noise suppression at RX (min) 80 dB
RX attenuation at TX (min) 80 dB
TX-RX isolation for 5 MHz separation (min) 70 dB
VSWR (max) 1.5:1
Impedance 50 ohms
Temperature range -30°C to +70°C
Number of cavities 4
MECHANICAL SPECIFICATIONS
Cavity diameter in. (cm) 4 (10)
Dimensions (HWD) in. (cm) 5.25 x 19 x 10.5 (13 x 48 x 26.67)
Mounting 19” Panel
Connectors N Female
Finish Acrylic enamel
Net weight lb. (kg) 21 (9.6)
Shipping weight lb. (kg) 26 (11.8)
Specify exact transmitter and receiver frequencies when ordering.
All specifications subject
184 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6010 Rev. 11/06
 1240 - 1300 MHz

TPRD-12044
PASS-REJECT DUPLEXER
6

DUPLEXERS
The Telewave TPRD-12044 Base due to dissimilar metals. Tuning isThe TPRD-12044 mounts on a 19”
Station Duplexer provides high simple and remains stable from -30ºstandard rack, with panel height of
performance and high reliability C to +70º C, thanks to the threaded5.25”. Power handling is 250 watts.
for the 23 cm Amateur Radio band. Invar tuning rod. Receiver desense protection is
With two Pass/Reject cavities in at least 80 dB, and TX sideband
Adjustable coupling optimizes
each transmitter and receiver path, suppression is at least 80 dB.
the required attenuation for ideal
these duplexers provide maximum
RX performance. All cavity inputs Typical spacing is 12 MHz. With TX
TX to RX protection in dense RF
are electrically shorted to ground to RX spacing of 6 MHz or more,
environments.
for maximum static and noise this duplexer can also combine
Mil-Spec semi-rigid cable is used protection. two transmitters into one antenna,
for all interconnections to ensure or feed two receivers. Frequency
All duplexers are tuned and
long life, and lowest insertion loss spacing and other requirements
tested with customer-specified
with maximum power handling must be specified with all orders.
frequencies prior to shipping.
capability.
No further adjustments should
Heavy-duty materials are used be required. The positive locking
in construction of this duplexer, mechanism allows for easy field
including silver-plated tuners and tuning if frequency changes are
ber yllium copper fingerstock implemented.
contactors, assuring high “Q”
performance with no problems
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 185
TWDS-6032 Rev. 10/12
 1240 - 1300 MHz

TPRD-12044

TYPICAL RESPONSE
0
10
20
30
Attenuation in dB

40
50
60
70
80
90

1263.80 1276.30 1288.80

Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 1240-1300 MHz
Frequency separation (typ. / min) 12 MHz / 6 MHz
Maximum input power 250 watts
Insertion loss (TX/RX to ant., typ) 1.0 dB
TX noise suppression at RX (min) 80 dB
RX attenuation at TX (min) 80 dB
TX-RX isolation for 6 MHz separation (min) 80 dB
VSWR (max) 1.5:1
Impedance 50 ohms
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Number of cavities (4) - 4” Dia. x 8” L
Dimensions (HWD) in. (cm) 5.25 x 19 x 10.5 (13 x 48 x 26.67)
Mounting 19” Panel
Connectors N Female
Finish Acrylic enamel
Net weight lb. (kg) 21 (9.6)
Shipping weight lb. (kg) 26 (11.8)
NOTE: Exact transmitter and receiver frequencies must be specified.
All specifications subject
186 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6032 Rev. 10/12
 806 - 960 MHz

TPCD-8626
COMBLINE DUPLEXER
6
The Telewave TPCD-8626 Combline

DUPLEXERS
duplexer is specifically designed for
use with 800 MHz master antenna
systems, supporting trunking
and conventional channels with
excellent rejection of external noise
sources. Maximum transmitter-
to-receiver protection is achieved
across the full 806-821 and 851-866
MHz bands.
The duplexer consists of two Telewave combline duplexers
compact combline filters mounted offer the ultimate performance TYPICAL RESPONSE
0
on a single 5.25" panel, and for trunking and conventional
10
provides steep-skirt selectivity systems, providing protection
with minimum insertion loss. All against receiver desensitization and 20

Attenuation in dB
units are tuned and tested with interference at congested sites. 30
customer specified frequencies
40
for optimum performance. No
further field adjustment should be 50

required. 60

70

-40 20 Fo +20 +40 +60 +80 +100

Frequency (MHz)

ELECTRICAL SPECIFICATIONS
Frequency range 806-960 MHz
Frequency separation (min) 45 MHz
Maximum input power 350 watts
TX or RX pass bandwidth 15 M H z t y p / 18 MHz m a x
Insertion loss at pass bandwidth (TX / RX) 1 dB max / 0.5 dB (typ)
TX attenuation at RX band (min) 85 dB
RX attenuation at TX band (min) 85 dB
TX-to-RX attenuation (min) 75 dB
VSWR, ref. to 50 ohms (max) 1.5:1
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Mounting 19” Panel
Dimensions HWD in. (cm) 5.25 x 19 x 4.5 (13.3 x 48 x 11.4)
Connectors N Female
Finish Clear alodine
Net weight lb. (kg) 9.5 (4.3)
Shipping weight lb. (kg) 14 (6.4)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 187
TWDS-6017 Rev. 3/16
 806 - 960 MHz

TPCD-8626HP
HIGH POWER COMBLINE DUPLEXER

The Telewave TPCD-8626HP High Telewave High Power Combline

Power Combline Duplexer handles Duplexers of fer the ultimate
500 watts, and is specially designed per formance in trunking and
for 800 and 900 MHz master conventional systems, providing
antenna systems which require high p rote c t io n a g a i n s t re cei ve r
power handling, sharp selectivity, desensitization and interference at
and very low insertion loss. This congested sites.
duplexer supports systems with
large frequency spreads, and
ensures suppression of out-of-band
emissions (OOBE).
The TPCD - 8626HP duplexer
consists of two combline filters
with 7-16 DIN connectors on both
transmitter and antenna ports. The
filters are mounted on a tray with a
19” x 5.25” front panel.
All units are tuned to user-specified
frequency bands for optimum
performance. No further adjustment
is required.
All specifications subject
188 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6003 Rev. 12/10
 806 - 960 MHz

TPCD-8626HP 6

DUPLEXERS
TYPICAL RESPONSE
0

10

20

30
Attenuation in dB

40

50

60

70

80

-45 -30 -15 Fo +15 +30 +45

Frequency (MHz)

RF SPECIFICATIONS
Frequency range 806-960 MHz
Frequency separation (min) 45 MHz
Maximum input power 500 watts
TX/RX pass bandwidth 15 MHz std. (10, 20,26 MHz opt.)
Insertion loss at pass bandwidth (TX and RX) 0.4 dB typ. / 0.75 dB max
TX attenuation at RX band (typ) 85 dB
RX attenuation at TX band (typ) 85 dB
TX to RX attenuation (min) 85 dB
VSWR, ref. to 50 ohms (max) 1.5:1
Temperature range -30°C to +70°C
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 5.25 x 19 x 16 (13.3 x 48 x 40.6)
Mounting 19” Panel
Connectors Antenna, TX input 7-16 DIN
RX Output N Female
Panel finish Clear alodine
Cavity finish Gray enamel
Net weight lb. (kg) 15 (6.8)
Shipping weight lb. (kg) 19.5 (8.9)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 189
TWDS-6003 Rev. 12/10
 70 - 85 MHz
TMND-0716 70-78 MHz
TMND-0816 77-85 MHz
TMND-0716, 0816
MID-BAND COMPACT DUPLEXERS

Te l e w a v e T M N D - 0716 /0 816
Mobile Duplexers provide high
performance in a compact design.
These rugged duplexers are
designed for use in base or mobile
installations, with minimum space
requirements.
Each duplexer consists of six
High "Q" helical resonators in a
band-reject configuration. This
compact design has no exposed
interconnect cables. Field tuning
can be performed with easily
accessible tuning elements on the
rear of the unit.
The TMND-0716 and 0816 are All duplexers are tuned and
designed to operate with at least tested with customer-specified
4 MHz TX to RX separation. This frequencies prior to shipping. When
configuration provides 75 dB of ordering, specify exact frequencies
isolation, and low insertion loss and connector type required (N or
permits power handling up to 50 BNC).
watts.

ELECTRICAL SPECIFICATIONS TYPICAL RESPONSE

0
0716: 70-78
Frequency range (MHz) 10
0816: 77-85
Frequency separation (min) 4 MHz 20

Maximum input power 50 watts

Attenuation in dB

30
Impedance / VSWR (max) 50 ohms / 1.5:1
40
Insertion loss (TX/RX to-antenna) 1.2 dB
TX noise at RX (min) 75 dB 50

RX attenuation at TX (min) 75 dB 60
TX-RX Iso. at 4 MHz sep. (min) 75 dB
70
Temperature range -20°C to +60°C
Resonators (6) - 1” 80

MECHANICAL SPECIFICATIONS
75 81 87
Dimensions (HWL) in. (cm) 1.2 x 6.1 x 5.4 (3 x 15.5 x 13.7) Frequency (MHz)
Connectors N or BNC
Finish Acrylic enamel
Net weight lb. (kg) 2.2 (1)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

190 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6021 Rev. 11/06
 148 - 174 MHz
TMND-1516 148-157 MHz

TMND-1516, 1616, 1716

VHF COMPACT DUPLEXERS
TMND-1616 156-165 MHz
TMND-1716 164-174 MHz 6
Te l ew ave T M N D -15/16/1716

DUPLEXERS
Mobile Duplexers provide high
performance in a compact design.
These rugged duplexers are
designed for use in base or mobile
installations, with minimum space
requirements.
Each duplexer consists of six
High "Q" helical resonators in a
band-reject configuration. This
compact design has no exposed
interconnect cables. Field tuning
can be performed with easily
accessible tuning elements on the
rear of the unit.
The TMND-15/16/1716 operate with All duplexers are tuned and
at least 4 MHz TX to RX separation. tested with customer-specified
This configuration provides 75 dB frequencies prior to shipping. When
of isolation, and low insertion loss ordering, specify exact frequencies
permits power handling up to 50 and connector type required (N or
watts. BNC).

ELECTRICAL SPECIFICATIONS TYPICAL RESPONSE

0
1516: 148-157 1716: 164-174
Frequency range (MHz) 10
Attenuation in dB

1616: 156-165 20
Frequency separation (min) 4 MHz 30
40
Maximum input power 50 watts 50
60
Impedance / VSWR (max) 50 ohms / 1.5:1 70
Insertion loss (TX/RX to-antenna) 1.4 dB 80

156.0 160.0 165.0

TX noise at RX (min) 75 dB
Frequency (MHz)
RX attenuation at TX (min) 75 dB
TX-RX Iso. at 4 MHz sep. (min) 75 dB
Temperature range -20°C to +60°C
Resonators (6) - 1”
MECHANICAL SPECIFICATIONS
Dimensions (HWL) in. (cm) 1.4 x 4.5 x 6.9 (3.5 x 11.4 x 17.5)
Footprint (mounting plate) in. (cm) 6.1 x 8.5 (16 x 22)
Connectors BNC Female or N Female
Finish Black acrylic enamel
Net weight lb. (kg) 2.2 (1)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 191
TWDS-6022 Rev. 10/12
 440 - 470 MHz
TMND-4416 440-450 MHz
TMND-4516 450-460 MHz
TMND-4416, 4516, 4616 TMND-4616 460-470 MHz

UHF COMPACT DUPLEXERS

Telewave TMND - 4 4/45/4 616

Mobile Duplexers provide high
performance in a compact design.
These rugged duplexers are
designed for use in base or mobile
installations, with minimum space
requirements.
Each duplexer consists of six
High "Q" helical resonators in a
band-reject configuration. This
compact design has no exposed
interconnect cables. Field tuning
can be performed with easily
accessible tuning elements on the
rear of the unit.
The TMND-44/45/4616 operate All duplexers are tuned and
with at least 5 MHz TX to RX tested with customer-specified
separation. This configuration frequencies prior to shipping. When
provides 75 dB of isolation, and ordering, specify exact frequencies
low insertion loss permits power and connector type required (N or
handling up to 50 watts. BNC).

ELECTRICAL SPECIFICATIONS TYPICAL RESPONSE

4416: 440-450 4616: 460-470 0
Frequency range (MHz)
Attenuation in dB

4516: 450-460 10
20
Frequency separation (min) 5 MHz 30
40
Maximum input power 50 watts
50
Impedance / VSWR (max) 50 ohms / 1.5:1 60
70
Insertion loss (TX/RX to antenna) 1.2 dB 80
TX noise at RX (min) 75 dB 450.0 460.0 470.0
RX attenuation at TX (min) 75 dB Frequency (MHz)
TX-RX Iso. at 5 MHz sep. (min) 75 dB
Temperature range -20°C to +60°C
Resonators (6) - 1”
MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 1.3 x 6.1 x 6.9 (3.3 x 15.5 x 17.5)
Footprint (mounting plate) in. (cm) 6.1 x 8.5 (16 x 22)
Connectors BNC Female or N Female
Finish Black acrylic enamel
Net weight lb. (kg) 2.2 (1)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

192 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6023 Rev. 11/06
 470 - 512 MHz
TMND-4716 470-480 MHz

TMND-4716, 4816, 4916, 5016

UHF COMPACT DUPLEXERS
TMND-4816 480-490 MHz
TMND-4916 490-500 MHz
TMND-5016 500-512 MHz
6
Te lewave Mo bile D u plexer s

DUPLEXERS
provide high performance in a
compact design. These rugged
duplexers are designed for use in
base or mobile installations, with
minimum space requirements.
Each duplexer consists of six
High "Q" helical resonators in a
band-reject configuration. This
compact design has no exposed
interconnect cables. Field tuning
can be performed if needed with
easily accessible tuning elements
on the rear of the unit.
Each duplexer covers a 10 MHz
segment between 470-512 MHz, All duplexers are tuned and
with t ypical 5 MHz T X to R X tested with customer-specified
separation. This configuration frequencies prior to shipping. When
provides 70 dB of isolation, and ordering, specify exact frequencies
low insertion loss permits power and connector type required (N or
handling up to 50 watts. BNC).

ELECTRICAL SPECIFICATIONS TYPICAL RESPONSE

Frequency range (MHz) 470-512 MHz (10 MHz segment) 0
Attenuation in dB

10
Frequency separation (typ) 5 MHz (3 MHz - Contact Telewave) 20
Maximum input power 50 watts 30
40
Impedance / VSWR (max) 50 ohms / 1.5:1 50
60
Insertion loss (TX/RX to antenna) 1.25 dB 70
TX noise at RX (min) 70 dB 80

RX attenuation at TX (min) 70 dB 470.0 473.0 476.0

Frequency (MHz)
TX-RX Iso. at 5 MHz sep. (min) 70 dB
Temperature range -20°C to +60°C
Resonators (6) - 1”

MECHANICAL SPECIFICATIONS
Dimensions (HWD) in. (cm) 1.3 x 6.1 x 6.9 (3.3 x 15.5 x 17.5)
Footprint (mounting plate) in. (cm) 6.1 x 8.5 (16 x 22)
Connectors BNC Female or N Female
Finish Black acrylic enamel
Net weight lb. (kg) 2.2 (1)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 193
TWDS-6027 Rev. 6/13
 769 - 805 MHz

TMND-7616
700 MHZ COMPACT DUPLEXER

The Telewave TMND-7616 Compact

Mobile Duplexer is a perfec t
complement to high performance
mobile data systems running on 12.5
and 25 KHz channels.
The TMND-7616 covers 769-775
and 799-805 MHz with full 6 MHz
band rejec tion. The compac t
size and form factor allow easy
integration with any radio layout
in all types of vehicles.
Each duplexer consists of six High
"Q" helical resonators in a band-
reject configuration. Field tuning
can be performed if needed with
easily accessible tuning elements on
the rear of the unit.
The TMND-7616 operates with at
least 30 MHz TX to RX separation.
This configuration provides 67 dB of
isolation, with low insertion loss.
All duplexers are tuned and
tested prior to shipping. N female
connectors are standard.
TYPICAL RESPONSE
ELECTRICAL SPECIFICATIONS
0
Attenuation in dB

Frequency range (MHz) 769-775 / 799-805 10

20
Frequency separation (min) 30 MHz 30
Input power 25 watts 40
50
Impedance / VSWR (max) 50 ohms / 1.5:1 60
70
Insertion loss (TX/RX to antenna) 1.2 dB 80
TX noise at RX (min) 67 dB 750 769-775 782.5 799-805
815
RX attenuation at TX (min) 67 dB Frequency (MHz)
TX-RX Iso. at 30 MHz sep. (min) 67 dB
Temperature range -20°C to +60°C
Resonators (6) - 1”
MECHANICAL SPECIFICATIONS
Dimensions (HWL) in. (cm) 1.25 x 6.0 x 6.5 (3.2 x 15.2 x 16.5)
Connectors BNC Female or N Female
Finish Black acrylic enamel
Net weight lb. (kg) 2.0 (0.9)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

194 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-6013 Rev. 5/13
 806 - 869 MHz

TMND-8616
800 MHZ COMPACT DUPLEXER
6
The Telewave TMND-8616 Compact

DUPLEXERS
Mobile Duplexer provides high
performance in a compact design.
This rugged duplexer is designed for
use in base or mobile installations,
with minimum space requirements.
Each duplexer consists of six High
"Q" helical resonators in a band-
reject configuration. Field tuning
can be performed if needed with
easily accessible tuning elements
on the rear of the unit.
The TMND-8616 operates with
typical 45 MHz TX to RX separation.
This configuration provides 70 dB
of isolation, and power handling up
to 50 watts with low insertion loss.
All duplexers are tuned and
tested with customer-specified
frequencies prior to shipping. When
ordering, specify exact frequencies
and connector type required (N or
BNC).

TYPICAL RESPONSE
ELECTRICAL SPECIFICATIONS
0
Frequency range 806-869 MHz 10
Attenuation in dB

Frequency separation (min / typ) 5 / 45 MHz 20

30
Maximum input power 50 watts 40
50
Impedance / VSWR (max) 50 ohms / 1.5:1
60
Insertion loss (TX/RX to-antenna) 1.0 dB 70
80
TX noise at RX (min) 70 dB
800.0 840.0 880.0
RX attenuation at TX (min) 70 dB
Frequency (MHz)
TX-RX Iso. at 5 MHz sep. (min) 70 dB
Temperature range -20°C to +60°C
Resonators (6) - 1”
MECHANICAL SPECIFICATIONS
Dimensions (HWL) in. (cm) 1.25 x 6.0 x 6.5 (3.2 x 15.2 x 16.5)
Connectors BNC Female or N Female
Finish Black acrylic enamel
Net weight lb. (kg) 2.0 (0.9)
Appearance of current production models
Shipping weight lb. (kg) 3.0 (1.4) may vary from picture.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 195
TWDS-6011 Rev. 10/10
7 BASE STATION ANTENNAS
7 BASE STATION ANTENNAS

Fiberglass Collinear
Collinear antennas provide a consistent omnidirectional
pattern with no external ground plane components.
Advanced engineering produces significant gain and
frequency range options. Fiberglass composite radomes
offer complete protection from severe environments.

Folded Dipole
Telewave Broadband Folded Dipole antennas can be
configured for several different horizontal patterns,
depending on coverage requirements. Cardiod, offset,
and bi-directional patterns are easily produced by
adjusting element spacing during or after installation.

Dipole Arrays
Dipole arrays use multiple elements to compress the
vertical pattern, providing more gain in a particular
direction or protection to or from a nearby system.
Electrical and mechanical tilt of 1-15 degrees is possible
with two to eight elements.

Yagi
Yagi antennas are rugged, compact devices which produce
a very directional horizontal pattern. These antennas
are fully sealed and are ideal for control and linking
applications.

Wideband
Wideband antennas cover very wide frequency ranges, in
discone and handheld configurations. Discone antennas
also provide a broad radiation pattern and consistent
VSWR.

Power Dividers
RF Power Dividers split a single input into 2, 3, or 4 outputs
with impedance matching to ensure 50 ohms at all ports.
These dividers handle up to 500 watts of power with no
port isolation.

Crossband Couplers
Crossband couplers allow radios in multiple frequency
bands to connect to appropriate antennas with a single
cable run and very low insertion loss. A pair of devices is
typically used for this application, or a single device can
couple multiple radios to a single broadband antenna.
 118 - 965 MHz

COLLINEAR ANTENNAS

Telewave COOL BLUE™ fiberglass collinear antennas are an

industry standard. These antennas are specified by system
designers who require their unique combination of wide bandwidth,
high performance, gain flexibility, and rugged durability in all
environmental conditions.
All Telewave collinear antennas handle 500 watts minimum input
power, and are available in eight major frequency bands between
118-965 MHz, with gain from 0 to 10 dBd. Horizontal patterns
are omnidirectional, and vertical beamwidth ranges from 7 to 42
degrees depending on gain and frequency.
The Telewave collinear design does not require external ground plane
radials, eliminating a major source of failure and RF intermodulation.
These antennas are constructed with brass and copper elements,
connected at DC ground potential for lightning impulse protection,
including a solid copper or brass top cap. All junctions are fully
soldered to prevent intermodulation. A heavy-duty 2.75” support
pipe made of 6061-T6 aluminum is permanently bonded to an
exceptionally strong radome, ensuring years of trouble-free
performance.
The COOL BLUE™ interwoven fiberglass radome provides
maximum protection from corrosive gases, ultraviolet radiation,
icing, salt spray, acid rain, and wind blown abrasives. Wind-load
ratings are up to 200 MPH with no ice, and the flexibility of the
radome (F6/8/10 models) allows enough antenna motion to resist
normal icing, without affecting the pattern. The special radome
color helps the antenna blend into the skyline, and absorbs solar
radiation to accelerate de-icing.
The standard connector type is a recessed N-female, attached
inside the base of the support pipe. A 24” coax jumper is included
to simplify installations using hard-line cable. For higher power
applications, a 7-16 DIN-F connector can be installed as an option.
One set of heavy-duty mounting clamps is included with each
antenna.

All specifications subject

198 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7035 Rev. 10/07
 118 - 136 MHz

ANT125F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT125F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to DC ground for lightning impulse
protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT125F2 - 127 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.56 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT125F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 118-136 MHz Dimensions (L x base diam.) in. 77 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 16 lb.
Power rating (typ.) 500 watts Shipping weight 20 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.6 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 62 lb.
Vertical beamwidth 38° Bending moment at top clamp 117 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 199
TWDS-7051 Rev. 1/11
 125 - 150 MHz

ANT135F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT135F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to DC ground for lightning impulse
protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT135F2 - 137 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.53 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT135F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 125-150 MHz Dimensions (L x base diam.) in. 72 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 15 lb.
Power rating (typ.) 500 watts Shipping weight 19 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.5 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 59 lb.
Vertical beamwidth 38° Bending moment at top clamp 101 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

200 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7059 Rev. 1/11
 135 - 165 MHz

ANT140F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT140F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to DC ground potential for lightning
impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT140F2 - 150 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.51 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT140 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 135-165 MHz Dimensions (L x base diam.) in. 66 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 13 lb.
Power rating (typ.) 500 watts Shipping weight 17 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.4 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 55 lb.
Vertical beamwidth 38° Bending moment at top clamp 83 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 201
TWDS-7047 Rev. 1/11
 148 - 174 MHz

ANT150F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT150F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to DC ground for lightning impulse -30 -30

protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT150F2 156 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.55 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT150 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 148-174 MHz Dimensions (L x base diam.) in. 60 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 12 lb.
Power rating (typ.) 500 watts Shipping weight 16 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.3 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 50 lb.
Vertical beamwidth 38° Bending moment at top clamp 67 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

202 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7017 Rev. 1/11
 138 - 175 MHz

ANT150F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd
7
The Telewave ANT150F6 is an

COLLINEAR
90
60 60
extremely rugged, medium-gain, -3
f iberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection. All junctions
are fully soldered to prevent -30 -30

RF intermodulation, and each

antenna is completely protected -60 -60
-90
w i t hi n a hig h -te c h, f l ex i b l e
radome to ensure survivability ANT150F6 - 156 MHz
Vertical Plane
i n t h e w o r s t e nv i r o n m e n t s . Gain = 6.41 dBd
The “Cool Blue” radome provides
maximum protection from corrosive
gases, UV radiation, icing, salt
spray, acid rain, and wind blown
abrasives. Eight models cover the
entire VHF band. Please specify
exact frequency and band code
(-1, -2, etc.) when ordering.
T h e A N T15 0 F 6 i n c l u d e s a n FREQUENCY RANGES
ANTC482 dual clamp set for ANT150F6-1 138 - 144 MHz
mounting to a 1.5” to 3.5” O.D. ANT150F6-2 144 - 151 MHz
support pipe, and a 24” removable ANT150F6-3 150 - 157 MHz
RG-213 N-Male jumper. Stand-off ANT150F6-4 156 - 164 MHz
and top mounts are also available. ANT150F6-5 158 - 166 MHz
ANT150F6-6 161 - 168 MHz
NOTE: THESE ANTENNAS ARE
SHIPPED VIA TRUCK FREIGHT ONLY ANT150F6-7 167 - 172.5 MHz
ANT150F6-8 171 - 175 MHz

SPECIFICATIONS 138-151 MHz 150-175 MHz

Frequency range 138-175 MHz (8 bands) Dimensions (L x base diam.) 256” x 2.75” 244” x 2.75”
Gain 6 dBd Tower weight (Antenna + clamps) 43 lb. 41 lb.
Power rating (typ.) 500 watts Shipping weight 65 lb. 62 lb.
Impedance 50 ohms Wind rating / 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 4.05 ft.² 3.97 ft.²
Pattern Omnidirectional Lateral Thrust at 100 MPH 162 lb. 159 lb.
Vertical beamwidth 20° Bending Moment - top clamp 1090 ft. lb. 1010 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 203
TWDS-7020 Rev. 5/12
 174 - 216 MHz

ANT195F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
90
The Telewave ANT195F2 is an
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection. The ANT195F2
is an excellent choice for SCADA or -60 -60
-90
other whitespace applications, and
ANT195F2 - 195 MHz
DTV translators. Vertical Plane
Gain = 2.52 dBd
All junctions are fully soldered
to prevent RF intermodulation,
and each antenna is completely
protected within a rugged, high-
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
174 195 220
salt spray, acid rain, and wind blown
abrasives.
The ANT195F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 174-216 MHz Dimensions (L x base diam.) in. 53 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 11 lb.
Power rating (typ.) 500 watts Shipping weight 15 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.2 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 46 lb.
Vertical beamwidth 38° Bending moment at top clamp 54 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

204 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7122 Rev. 10/13
 195 - 260 MHz

ANT220F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
90
The Telewave ANT220F2 is an

COLLINEAR
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection. The ANT220F2
is an excellent choice for wireless -60 -60
-90
PTC systems in urban or rural
ANT220F2 - 230 MHz
areas. Vertical Plane
Gain = 2.58 dBd
All junctions are fully soldered
to prevent RF intermodulation,
and each antenna is completely
protected within a rugged, high-
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT220 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 195-260 MHz Dimensions (L x base diam.) in. 51 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 11 lb.
Power rating (typ.) 500 watts Shipping weight 14 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.1 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 44 lb.
Vertical beamwidth 38° Bending moment at top clamp 47 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 205
TWDS-7053 Rev. 1/11
 216 - 225 MHz

ANT220F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT220F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
de signed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection. The ANT220F6
is an excellent choice for wireless -30 -30

PTC systems in urban or rural

areas. -60 -60
-90
All junctions are fully soldered ANT220F6 - 221 MHz
to prevent RF intermodulation, Vertical Plane
and each antenna is completely Gain = 6.11 dBd
protected within a rugged, high-
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 2 2 0 F6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.
NOTE: THIS ANTENNA IS SHIPPED
VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 216-225 MHz Dimensions (L x base diam.) in. 171 x 2.75
Gain 6 dBd Tower weight (antenna + clamps) 35 lb.
Power rating (typ.) 500 watts Shipping weight 50 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 3.1 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 122 lb.
Vertical beamwidth 20° Bending moment at top clamp 494 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

206 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7021 Rev. 1/11
 340 - 370 MHz

ANT355F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd
7
90
The Telewave ANT355F6 is an

COLLINEAR
60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation, -60 -60
and each antenna is completely -90

protected within a rugged, high- ANT355F6 - 355 MHz

tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.27 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A NT 355F6 in c lu d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 340-370 MHz Dimensions (L x base diam.) in. 126 x 2.75
Gain 6 dBd Tower weight (antenna + clamps) 26 lb.
Power rating (typ.) 500 watts Shipping weight 37 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 2.5 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 99 lb.
Vertical beamwidth 18° Bending moment at top clamp 263 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 207
TWDS-7094 Rev. 1/11
 370 - 400 MHz

ANT385F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT385F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT385F6 - 385 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.12 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 3 8 5F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 370-400 MHz Dimensions (L x base diam.) in. 112 x 2.75
Gain 6 dBd Tower weight (antenna + clamps) 24 lb.
Power rating (typ.) 500 watts Shipping weight 35 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 2.3 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 91 lb.
Vertical beamwidth 18° Bending moment at top clamp 205 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

208 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7095 Rev. 1/11
 360 - 455 MHz

ANT400F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT400F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to ground potential for lightning -30 -30

impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT400F2 - 410 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.51 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT40 0 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 360-455 MHz Dimensions (L x base diam.) in. 44 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 9 lb.
Power rating (typ.) 500 watts Shipping weight 11 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 39 lb.
Vertical beamwidth 38° Bending moment at top clamp 33 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 209
TWDS-7072 Rev. 1/11
 405 - 440 MHz

ANT415F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT415F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT415F6 - 421 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.7 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T415 F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 405-440 MHz Dimensions (L x base diam.) in. 101 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 22 lb.
Power rating (typ.) 500 watts Shipping weight 28 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 185 / 155 MPH
VSWR 1.5:1 or less Maximum exposed area 1.7 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 68 lb.
Vertical beamwidth 18° Bending moment at top clamp 149 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

210 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7030 Rev. 1/11
 395 - 436 MHz

ANT415F8
FIBERGLASS COLLINEAR ANTENNA 8 dBd
7
The Telewave ANT415F8 is an

COLLINEAR
90
60 60
ex tremely rugged, high-gain -3
f iberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT415F8 - 420 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 8.68 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T415 F 8 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 395-436 MHz Dimensions (L x base diam.) in. 240 x 2.75
Gain 8 dBd Tower weight (antenna + clamps) 40 lb.
Power rating (typ.) 500 watts Shipping weight 60 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 3.9 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 157 lb.
Vertical beamwidth 11° Bending moment at top clamp 975 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 211
TWDS-7022 Rev. 1/11
 380 - 470 MHz

ANT425F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT425F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT425F2 - 425 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.56 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT425F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 380-470 MHz Dimensions (L x base diam.) in. 42 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 9 lb.
Power rating (typ.) 500 watts Shipping weight 11 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 38 lb.
Vertical beamwidth 38° Bending moment at top clamp 30 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

212 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7104 Rev. 1/11
 420 - 480 MHz

ANT450F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT450F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT450F2 - 447 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.54 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT450 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 420-480 MHz Dimensions (L x base diam.) in. 42 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 9 lb.
Power rating (typ.) 500 watts Shipping weight 11 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 38 lb.
Vertical beamwidth 38° Bending moment at top clamp 30 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 213
TWDS-7018 Rev. 1/11
 445 - 480 MHz

ANT450F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT450F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
de signed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT450F6 - 460 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.32 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T4 5 0 F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 445-480 MHz Dimensions (L x base diam.) in. 94 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 21 lb.
Power rating (typ.) 500 watts Shipping weight 26 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 1.5 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 60 lb.
Vertical beamwidth 18° Bending moment at top clamp 143 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

214 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7036 Rev. 1/11
 430 - 475 MHz

ANT450F10
FIBERGLASS COLLINEAR ANTENNA 10 dBd
7
The Telewave ANT450F10 is an

COLLINEAR
90
60 60
extremely rugged, high-gain, -3
f iberglass collinear antenna,
30 30
de signed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT450F10 - 450 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 10.06 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT450 F10 includes an
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 430-475 MHz Dimensions (L x base diam.) in. 244 x 2.75
Gain 10 dBd Tower weight (antenna + clamps) 41 lb.
Power rating (typ.) 500 watts Shipping weight 62 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 4.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 159 lb.
Vertical beamwidth 7° Bending moment at top clamp 1010 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 215
TWDS-7037 Rev. 1/11
 450 - 512 MHz

ANT480F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT480F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT480F2 - 487 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.51 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT480 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 450-512 MHz Dimensions (L x base diam.) in. 42 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 9 lb.
Power rating (typ.) 500 watts Shipping weight 11 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 38 lb.
Vertical beamwidth 38° Bending moment at top clamp 30 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

216 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7078 Rev. 1/11
 470 - 512 MHz

ANT500F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd
7
The Telewave ANT500F6 is an

COLLINEAR
90
60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
de signed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation, -60 -60
and each antenna is completely -90
protected within a rugged, high- ANT500F6 - 490 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.28 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing, TYPICAL VSWR RESPONSE

salt spray, acid rain, and wind blown 1.5:1

abrasives. 1.4:1

1.3:1
T h e A N T5 0 0 F6 i n c l u d e s a n 1.2:1
ANTC482 dual clamp set for 1.1:1
mounting to a 1.5” to 3.5” O.D. 470 491 512

support pipe, and a 24” removable FREQUENCY (MHz)

RG-213 N-Male jumper. Stand-off

and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 470-512 MHz Dimensions (L x base diam.) in. 89 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 20 lb.
Power rating (typ.) 500 watts Shipping weight 25 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 1.4 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 57 lb.
Vertical beamwidth 19° Bending moment at top clamp 127 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 217
TWDS-7049 Rev. 1/11
 470 - 512 MHz

ANT500F10
FIBERGLASS COLLINEAR ANTENNA 10 dBd

The Telewave ANT500F10 is an 90

60 60
extremely rugged, high-gain, -3
f iberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT500F10 - 495 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 10.06 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT50 0F10 includes an
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
Frequency (continuous) 470-512 MHz Dimensions (L x base diam.) in. 244 x 2.75
Gain 10 dBd Tower weight (antenna + clamps) 41 lb.
Power rating (typ.) 500 watts Shipping weight 62 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 150 / 125 MPH
VSWR 1.5:1 or less Maximum exposed area 4.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 159 lb.
Vertical beamwidth 7° Bending moment at top clamp 1010 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

218 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7050 Rev. 1/11
 734 - 960 MHz

ANT734-960F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT734-960F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact, -10

wideband antenna produces 2.5 dBd -20

gain, and is designed for operation
0 0
in all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to ground potential for lightning -30 -30

impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT734-960F2 - 838 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.5 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT 734 -960F2 includes
the ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 734-960 MHz Dimensions (L x base diam.) in. 38 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 8 lb.
Power rating (typ.) 500 watts Shipping weight 10 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 0.9 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 35 lb.
Vertical beamwidth 38° Bending moment at top clamp 23 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 219
TWDS-7056 Rev. 1/11
 734 - 806 MHz

ANT770F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT770F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
-30 -30
to ground potential for lightning
impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT770F2 - 750 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.5 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT 770 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 734-806 MHz Dimensions (L x base diam.) in. 38 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 8 lb.
Power rating (typ.) 500 watts Shipping weight 10 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 0.9 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 35 lb.
Vertical beamwidth 38° Bending moment at top clamp 23 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

220 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7052 Rev. 1/11
 746 - 806 MHz

ANT770F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd
7
The Telewave ANT770F6 is an

COLLINEAR
90
60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT770F6 - 776 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.15 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 770 F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 746-806 MHz Dimensions (L x base diam.) in. 61 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 19 lb.
Power rating (typ.) 500 watts Shipping weight 23 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.1 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 42 lb.
Vertical beamwidth 19° Bending moment at top clamp 55 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 221
TWDS-7086 Rev. 4/13
 745 - 860 MHz

ANT825F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT825F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT825F6 - 800 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.09 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 82 5F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D. 745 805 860

support pipe, and a 24” removable

RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 745-860 MHz Dimensions (L x base diam.) in. 59 x 2.75
Gain 6 dBd Tower weight (antenna + clamps) 18 lb.
Power rating (typ.) 500 watts Shipping weight 22 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.05 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 41 lb.
Vertical beamwidth 19° Bending moment at top clamp 52 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

222 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7109 Rev. 4/13
 806 - 896 MHz

ANT850F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
7
The Telewave ANT850F2 is an

COLLINEAR
90
60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
30 30
vertical beamwidth. This compact -10

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to ground potential for lightning -30 -30

impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT850F2 - 851 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.58 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT850 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 806-896 MHz Dimensions (L x base diam.) in. 38 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 8 lb.
Power rating (typ.) 500 watts Shipping weight 10 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 0.9 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 35 lb.
Vertical beamwidth 38° Bending moment at top clamp 23 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 223
TWDS-7054 Rev. 1/11
 806 - 896 MHz

ANT850F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd

The Telewave ANT850F6 is an 90

60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT850F6 - 850 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.16 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 8 5 0 F6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 806-896 MHz Dimensions (L x base diam.) in. 56 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 18 lb.
Power rating (typ.) 500 watts Shipping weight 22 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 39 lb.
Vertical beamwidth 19° Bending moment at top clamp 46 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

224 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7010 Rev. 1/11
 806 - 896 MHz

ANT850F10
FIBERGLASS COLLINEAR ANTENNA 10 dBd
7
The Telewave ANT850F10 is an

COLLINEAR
90
60 60
extremely rugged, high-gain, -3
f iberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT850F10 - 850 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 10.10 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT850F10 includes an
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 806-896 MHz Dimensions (L x base diam.) in. 83 x 2.375
Gain 10 dBd Tower weight (antenna + clamps) 19 lb.
Power rating (typ.) 500 watts Shipping weight 23 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.3 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 53 lb.
Vertical beamwidth 6° Bending moment at top clamp 106 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 225
TWDS-7011 Rev. 1/11
 880 - 960 MHz

ANT900F2
FIBERGLASS COLLINEAR ANTENNA 2.5 dBd

The Telewave ANT900F2 is an 90

60 60
extremely rugged collinear antenna, -3
with moderate gain and wide
vertical beamwidth. This compact 30 -10 30

antenna produces 2.5 dBd gain, -20

and is designed for operation in
0 0
all environmental conditions. The
antenna is constructed with brass
and copper elements, with a path
to ground potential for lightning -30 -30

impulse protection.
-60 -60
All junctions are fully soldered -90
to prevent RF intermodulation, ANT900F2 - 928 MHz
and each antenna is completely Vertical Plane
protected within a rugged, high- Gain = 2.5 dBd
tech radome to ensure survivability
in the worst environments. The
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT90 0 F2 includes the
ANTC485 dual clamp set for
mounting to a 1.5” to 3” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper.

SPECIFICATIONS
Frequency (continuous) 880-960 MHz Dimensions (L x base diam.) in. 38 x 2.75
Gain 2.5 dBd Tower weight (antenna + clamps) 8 lb.
Power rating (typ.) 500 watts Shipping weight 10 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 0.9 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 35 lb.
Vertical beamwidth 38° Bending moment at top clamp 23 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

226 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7055 Rev. 1/11
 870 - 965 MHz

ANT940F6
FIBERGLASS COLLINEAR ANTENNA 6 dBd
7
The Telewave ANT940F6 is an

COLLINEAR
90
60 60
ex tremely rugged, medium - -3
gain, fiberglass collinear antenna,
30 30
designed for op er a tion in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT940F6 - 930 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 6.1 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
T h e A N T 94 0 F 6 i n c l u d e s a n
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 870-965 MHz Dimensions (L x base diam.) in. 56 x 2.375
Gain 6 dBd Tower weight (antenna + clamps) 18 lb.
Power rating (typ.) 500 watts Shipping weight 22 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.0 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 39 lb.
Vertical beamwidth 19° Bending moment at top clamp 46 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 227
TWDS-7012 Rev. 1/11
 870 - 965 MHz

ANT940F10
FIBERGLASS COLLINEAR ANTENNA 10 dBd

The Telewave ANT940F10 is an 90

60 60
extremely rugged, high-gain, -3
f iberglass collinear antenna,
30 30
designed for operation in all -10

environmental conditions. The -20

antenna is constructed with brass
0 0
and copper elements, connected at
DC ground potential for lightning
impulse protection.
-30 -30
All junctions are fully soldered
to prevent RF intermodulation,
-60 -60
and each antenna is completely -90
protected within a rugged, high- ANT940F10 - 930 MHz
tech radome to ensure survivability Vertical Plane
in the worst environments. The Gain = 10.12 dBd
“Cool Blue” radome provides
maximum protection from corrosive
gases, ultraviolet radiation, icing,
salt spray, acid rain, and wind blown
abrasives.
The ANT940F10 includes an
ANTC482 dual clamp set for
mounting to a 1.5” to 3.5” O.D.
support pipe, and a 24” removable
RG-213 N-Male jumper. Stand-off
and top mounts are also available.

SPECIFICATIONS
Frequency (continuous) 870-965 MHz Dimensions (L x base diam.) in. 83 x 2.375
Gain 10 dBd Tower weight (antenna + clamps) 19 lb.
Power rating (typ.) 500 watts Shipping weight 23 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 200 / 150 MPH
VSWR 1.5:1 or less Maximum exposed area 1.4 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 55 lb.
Vertical beamwidth 6° Bending moment at top clamp 112 ft. lb.
Termination Recessed N Female (100 MPH, 40 PSF flat plate equiv.)
7-16 DIN-F opt.

All specifications subject

228 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7013 Rev. 1/11
 900 - 960 MHz
ANT960F0-1 900-930 MHz

ANT960F0
WIRELESS DATA ANTENNA 2 dBd
ANT960F0-2 920-960 MHz
7
The Telewave ANT960F0 “Data

COLLINEAR
90
60 60
Stick” is a rugged, economical -3
omni antenna for wire less data
30 30
applications in the 900 MHz band. -10

The antenna is constructed entirely -20

from brass internal components,
0 0
and the durable radome is designed
to withstand severe weather
and en vi ron men tal conditions.
-30 -30
The radome will not corrode or
degrade as a result of exposure to
UV, salt water, oil, or most common -60 -60
-90
chemical fumes. Optional mounting
ANT960F0 - 915 MHz
hardware is available for various
Vertical Plane
applications. Gain = 2.0 dBd

Shown with optional clamp

SPECIFICATIONS
Frequency range 900-930 / 920-960 MHz Dimensions (L x base diam.) in. 14.5 x 1
Gain 2 dBd Antenna weight 1 lb.
Power rating (typ.) 50 watts Shipping weight 3 lb.
Impedance 50 ohms Wind rating / with 0.5” ice 90 / 90 MPH
VSWR 1.5:1 or less Maximum exposed area 0.1 ft.²
Pattern Omnidirectional Lateral thrust at 100 MPH 4 lb.
Vertical beamwidth 42° Bending moment at top clamp 2 ft. lb.
Termination Recessed N-Male (100 MPH, 40 PSF flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 229
TWDS-7039 Rev. 1/11
 118 - 960 MHz

INSTALLATION GUIDE
FOR COLLINEAR ANTENNAS F2 MODELS

WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let go
and stay away. Call the utility company for assistance. Always use safety devices for tower
climbing. Ensure that the tower structure is well grounded for lightning protection.

IMPORTANT - BEFORE ASSEMBLING AND MOUNTING: Figure 1: ANTC485 Clamp Kit

Carefully read these instructions and study the diagrams. Check to make
sure you have all parts. Both clamps must be installed and properly
spaced to prevent antenna rotation from wind load.

PARTS LIST
(1) Antenna assembly
(1) Jumper RG-213 N-male to N-male 24"
(provided only with N-terminated antennas)
(1) ANTC485 clamp kit
Clamp Kit Contents (Figure 1):
(2) Clamp plates
(2) 3/8”-16 stainless U bolts
(4) Hex nuts
(4) Lock washers
(1) Anti-seize compound Figure 2: Typical Mounting Configuration

MOUNTING INSTRUCTIONS
1. The welded mounting rails are intended to be placed against the support
structure when used with the supplied clamp set. When using an ANTC483
or other clamp set, the mounting rails should be turned to one side, out of
contact with the support.
2. Apply anti-seize compound to ends of u-bolts. Place a loosely assembled
clamp over the top of the mast. Feed the antenna base ferrule down through
the clamp until aligned with the upper attachment point. Tighten down the
hex nuts and straighten the antenna until clamped into a vertical position.
3. Attach and secure the lower antenna clamp with supplied hex nuts and
lock washers, to provide reasonable pressure to the support structure and
antenna base ferrule (Figure 2).
4. The antenna input connector is a Type N or 7-16 DIN Female. A 24" N-male
jumper is provided for antennas with N input. Connect RF feed cable
terminated with Type N or 7-16 DIN as required to antenna input connector.
Secure all cables with cable ties.
5. Be sure to properly seal the input connector with waterproof tape or other
sealing material. See Telewave TWDS-0502 for a recommended method of
connector sealing.
All specifications subject
230 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7084 Rev. 4/11
INSTALLATION GUIDE
FOR COLLINEAR ANTENNAS F6, F8, AND F10 MODELS
7

COLLINEAR
WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let go
and stay away. Call the utility company for assistance. Always use safety devices for tower
climbing. Ensure that the tower structure is well grounded for lightning protection.

Figure 1:
IMPORTANT - BEFORE ASSEMBLING AND MOUNTING: Clamp Set Contents
Carefully read these instructions and study the diagrams. Check to make sure
you have all parts. The antenna and clamp kit are packaged as two separate
items. Both clamps must be installed and properly spaced to prevent antenna
rotation from wind load.
NOTE: To prevent possible damage to the ferrule and radome, tighten all nuts
only until the lock washers are flattened. Then add 1/2 turn to each.
PARTS LIST
(1) Antenna assembly
(1) Jumper RG-213 N-male to N-male 24"
(provided only with N-terminated antennas) Figure 2:
(1) ANTC482 clamp kit Clamp Preassembly
Clamp kit Contents (figure 1):
(8) galvanized clamp plates
(4) 1/2”-13 x 10” stainless steel threaded rods
(16) 1/2” stainless steel hex nuts
(16) 1/2” stainless steel split lock washers
(1) Anti-seize compound
MOUNTING INSTRUCTIONS
1. Apply anti-seize compound to threaded rod ends. Insert rods through dual
clamps with hex nuts and lock washers in the middle of the clamps as shown
in figure 2. Mount both clamps to the support structure with 2 single clamp
plates, hex nuts, and lock washers. Arrange clamps so that 1”-2” of ferrule Figure 3: Assembly
is exposed above and below the clamps. Be sure to allow sufficient thread
length on the antenna side of the clamps.
2. Attach antenna clamp plate to the upper clamp set only, allowing maximum
plate movement on the rods. Feed the antenna base ferrule down through
the clamp until aligned with the upper attachment point. Partially tighten the
hex nuts and straighten the antenna until clamped into a vertical position.
3. Attach and secure the lower antenna clamp with supplied hex nuts and lock
washers, and tighten both clamps until the lock washers are flat plus 1/2 turn
additional on each nut. (Figure 3).
4. The antenna input connector is a Type N or 7-16 DIN Female. A 24" N-male
jumper is provided for antennas with N input. Connect RF feed cable
terminated with Type N or 7-16 DIN as required to antenna input connector.
Secure all cables with cable ties.
5. Be sure to properly seal the input connector with waterproof tape or other
sealing material. See Telewave TWDS-0502 for a recommended method of
connector sealing.
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 231
TWDS-7083 Rev. 4/11
 ANTC482 CLAMP SET
FOR COLLINEAR ANTENNAS

WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let go
and stay away. Call the utility company for assistance. Always use safety devices for tower
climbing. Ensure that the tower structure is well grounded for lightning protection.

IMPORTANT - BEFORE ASSEMBLING AND MOUNTING:

Carefully read these instructions and study the diagrams. Check to make sure Figure 1:
Clamp Set Contents
you have all parts. The antenna and clamp kit are packaged as two separate
items. Both clamps must be installed and properly spaced to prevent antenna
rotation from wind load.
NOTE: To prevent possible damage to the ferrule and radome, tighten all nuts
only until the lock washers are flattened. Then add 1/2 turn to each.

PARTS LIST (Figure 1)

(8) galvanized clamp plates
(4) 1/2”-13 x 10" stainless steel threaded rods
(16) 1/2” stainless steel hex nuts
(16) 1/2” stainless steel split lock washers
Figure 2:
(1) Anti-seize compound Clamp Preassembly

MOUNTING INSTRUCTIONS
Apply anti-seize compound to threaded rod ends. Insert rods through
dual clamps with hex nuts and lock washers in the middle of the clamps as
shown in figure 2. Mount both clamps to the support structure with 2 single
clamp plates, hex nuts, and lock washers. Arrange clamps so that 1”-2” of
ferrule is exposed above and below the clamps. Be sure to allow sufficient
thread length on the antenna side of the clamps.. Tighten clamps only until
lockwashers are flat, then add ½ turn additional on each nut.

Dimensional Data:
Figure 3: Assembly ANTC482 can be attached to
square or round tower legs from
1.5” to 3.5” O.D.
Antenna Clamp holes are 9/16” diameter,
Base
and 4.75” inches center to center.

Mast or
Support
Structure

All specifications subject

232 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7093 Rev. 10/13
ANTC483/483SS CLAMP SET
FOR COLLINEAR ANTENNAS
7

COLLINEAR
WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let go
and stay away. Call the utility company for assistance. Always use safety devices for tower
climbing. Ensure that the tower structure is well grounded for lightning protection.

IMPORTANT - BEFORE ASSEMBLING AND MOUNTING:

Carefully read these instructions and study the diagrams. Check to make sure Figure 1:
you have all parts. The antenna and clamp kit are packaged as two separate Clamp Set Contents
items. Both clamps must be installed and properly spaced to prevent antenna
rotation from wind load.
NOTE: To prevent possible damage to the ferrule and radome, tighten all nuts
only until the lock washers are flattened. Then add 1/2 turn to each.

PARTS LIST (Figure 1)

(4) Tower or antenna (single) galvanized clamp plates
(2) Welded (dual) galvanized clamp plates
(4) 1/2”-13 x 10" stainless steel threaded rods
(12) 1/2” stainless steel hex nuts
(8) 1/2” stainless steel split lock washers
(1) Anti-seize compound Figure 2:
Clamp Preassembly
MOUNTING INSTRUCTIONS
Apply anti-seize compound to threaded rod ends. Insert rods through
dual clamps with hex nuts and lock washers in the middle of the clamps as
shown in figure 2. Mount both clamps to the support structure with 2 single
clamp plates, hex nuts, and lock washers. Arrange clamps so that 1”-2” of
ferrule is exposed above and below the clamps. Be sure to allow sufficient
thread length on the antenna side of the clamps. Tighten clamps only until
lockwashers are flat, then add ½ turn additional on each nut.

Figure 3: Assembly (end view)

Dimensional Data:
ANTC483 and 483SS can be
attached to square or round tower
legs from 1.5” to 3.5” O.D.
Antenna Clamp holes are 9/16” diameter,
Base and 4.75” inches center to center.

Mast or
Support
Structure

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 233
TWDS-7085 Rev. 10/13
 30 - 1000 MHz

DIPOLE ANTENNAS

Telewave Dipole and Dipole Array antennas are built in the USA to
withstand harsh conditions in the most demanding applications.
Telewave dipoles are in service on mountaintops in Alaska, oil rigs
in the Gulf of Mexico, Phillipine jungles, and the deserts of North
Africa. Constructed from 6061-T6 aluminum, Telewave Dipoles
feature broad bandwidth, and superior lightning impulse protection
thanks to direct DC ground construction.
Telewave dipole antennas and arrays also feature a high-tech
coating called Txylan™, which completely encapsulates all metal
antenna components, providing total protection from water,
corrosive chemicals, salt spray, and windblown abrasives. This
smooth black coating also dramatically reduces surface friction,
reducing and often preventing ice adhesion, while improving
absorption of solar radiation.
All cabling is Mil-Spec RG-213/U, and all external connection points
are sealed with Telewave's field-proven MilleniumSeal™, which
provides permanent environmental protection. The RF feed cable
and connection to each element is internally sealed within the
element, eliminating any possibility of failure due to corrosion or
ice expansion.
The standard connector type is N-Male, and 7-16 DIN can be
installed as an option for high power applications. Gain ranges from
1 to 12 dBd, depending on configuration and number of elements.
Each lowband model from 33-48 MHz includes a heavy-duty clamp
set to attach the antenna boom to a mast or tower, as well as one
element support boom with all required clamps.
All dipoles above 54 MHz are UPS shippable, and the horizontal
pattern on all models is fully adjustable at any time during or after
installation. This unique flexibility means that a single or multi-dipole
array can provide a semi-directional, bi-directional, or nearly omni
radiation pattern. Up to 15 degrees of mechanical and/or electrical
tilt is also available for arrays of 2 or more dipoles, allowing a level
of pattern control not possible with other antenna types.

All specifications subject

234 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7080 Rev. 10/13
 33.5 - 41 MHz

ANT37D
DIPOLE ANTENNA
7
The Telewave ANT37D is a rugged, Each antenna is also completely

DIPOLES
high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF lowband coating, which resists water and ice
services, including public safety, buildup, and provides exceptional
utilities, paging links and military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 7.5 MHz bandwidth and windblown abrasives.
with no tuning required, and
ANT 37D antenna s include
multiple elements can be stacked
ANTC482 mounting hardware
for increased gain and pattern
which will accommodate a 1.5”-3.5”
control.
diameter galvanized steel support
Each antenna is constructed with pipe or tower leg. One ANTLBB
6061-T6 aluminum, and is welded element support boom with all
at the base to a solid, machined required clamps is also included.
aluminum mounting block for
Due to the size and potential wind
maximum strength. A massive
loading of this antenna, tower side
3.5” diameter boom provides
mounting is recommended.
exceptional strength.
NOTE: THIS ANTENNA IS SHIPPED
VIA TRUCK FREIGHT ONLY

ANT37D at 40 MHz
SPECIFICATIONS 0

Frequency (continuous) 33.5-41 MHz 330 2.6 dBd

-3
30

Power rating (typ.) 500 watts 300 -10 60

Impedance 50 ohms -20

VSWR 1.5:1 or less 270 90

Pattern Offset circular

Lightning protection DC Ground 240 120

Termination N-Male or 7-16 DIN (opt.)

on harness feed cable 210 150
180

Gain 2.5 dBd (typ.) H-Plane gain 2.6 dBd

Vertical beamwidth 78° 1/4 wl. spacing from tower
Horizontal beamwidth 170° (typ.)
Dipole dimensions (H x W) 145 x 9 in.
Boom dimensions (L x Dia.) 96 x 3.5 in.
Weight (antenna + clamps) 51 lb.
Wind rating / 0.5” ice 125 / 100 MPH
Maximum exposed area 3.8 ft.²
Lateral thrust at 100 MPH 152 lb

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 235
TWDS-7073 Rev. 10/13
 37.5 - 44.5 MHz

ANT40D
DIPOLE ANTENNA

The Telewave ANT40D is a rugged, Each antenna is also completely

high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF lowband coating, which resists water and ice
services, including public safety, buildup, and provides exceptional
utilities, paging links or military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 7 MHz bandwidth with and windblown abrasives.
no tuning required, and multiple
A N T4 0 D a n t e n n a s i n c l u d e
element s can be stacked for
ANTC482 mounting hardware
inc rea s e d gain and pat ter n
which will accommodate a 1.5”-3.5”
control.
diameter galvanized steel support
Each antenna is constructed with pipe or tower leg. One ANTLBB
6061-T6 aluminum, and is welded element support boom with all
at the base to a solid, machined required clamps is also included.
aluminum mounting block for
Due to the size and potential wind
maximum strength. A massive
loading of this antenna, tower side
3.5” diameter boom provides
mounting is recommended.
exceptional strength.
NOTE: THIS ANTENNA IS SHIPPED
VIA TRUCK FREIGHT ONLY

ANT40D at 40 MHz
SPECIFICATIONS
0

Frequency (continuous) 37.5-44.5 MHz 330 2.6 dBd 30

-3

Power rating (typ.) 500 watts

300 -10 60

Impedance 50 ohms
-20

VSWR 1.5:1 or less 270 90

Pattern Offset circular

Lightning protection DC Ground 240 120

Termination N-Male or 7-16 DIN (opt.)

on harness feed cable 210 150
180
Gain (typ.) 2.5 dBd H-Plane gain 2.6 dBd
Vertical beamwidth 78° 1/4 wl. spacing from tower
Horizontal beamwidth Dependent on pattern
Dipole dimensions (H x W) 129 x 9 in.
Boom dimensions (L x Dia.) 96 x 3.5 in.
Weight (antenna + clamps) 46 lb.
Wind rating / 0.5” ice 125 / 100 MPH
Maximum exposed area 3.6 ft.²
Lateral thrust at 100 MPH 142 lb

All specifications subject

236 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7097 Rev. 10/13
 38.5 - 47 MHz

ANT42D
DIPOLE ANTENNA
7
The Telewave ANT42D is a rugged, Each antenna is also completely

DIPOLES
high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF lowband coating, which resists water and ice
services, including public safety, buildup, and provides exceptional
utilities, paging links or military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 8.5 MHz bandwidth and windblown abrasives.
with no tuning required, and
A N T4 2 D a n t e n n a s i n c l u d e
multiple elements can be stacked
ANTC482 mounting hardware
for increased gain and pattern
which will accommodate a 1.5”-3.5”
control.
diameter galvanized steel support
Each antenna is constructed with pipe or tower leg. One ANTLBB
6061-T6 aluminum, and is welded element support boom with all
at the base to a solid, machined required clamps is also included.
aluminum mounting block for
Due to the size and potential wind
maximum strength. A massive
loading of this antenna, tower side
3.5” diameter boom provides
mounting is recommended.
exceptional strength.
NOTE: THIS ANTENNA IS SHIPPED
VIA TRUCK FREIGHT ONLY

SPECIFICATIONS
ANT42D at 42 MHz
Frequency (continuous) 38.5-47 MHz 0

Power rating (typ.) 500 watts 330 2.6 dBd

-3
30

Impedance 50 ohms 300 -10 60

VSWR 1.5:1 or less -20

Pattern Offset circular 270 90

Lightning protection DC Ground

Termination N-Male or 7-16 DIN (opt.) 240 120
on harness feed cable
Gain (typ.) 2.5 dBd 210 150
180

Vertical beamwidth 78 degrees H-Plane gain 2.6 dBd

Horizontal beamwidth 180 degrees 1/4 wl. spacing from tower - 69”
Dipole dimensions (H x W) 126 x 9 in.
Boom dimensions (L x Dia.) 78 x 3.5 in.
Weight (antenna + clamps) 41 lb.
Dipole spacing from tower 69 in.
Wind rating / 0.5” ice 125 / 100 MPH
Maximum exposed area 3.3 ft.²
Lateral thrust at 100 MPH 132 lb

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 237
TWDS-7091 Rev. 10/13
 41.5 - 48 MHz

ANT44D
DIPOLE ANTENNA

The Telewave ANT44D is a rugged, Each antenna is also completely

high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF lowband coating, which resists water and ice
services, including public safety, buildup, and provides exceptional
utilities, paging links or military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 6.5 MHz bandwidth and windblown abrasives.
with no tuning required, and
A N T4 4 D a n t e n n a s i n c l u d e
multiple elements can be stacked
ANTC482 mounting hardware
for increased gain and pattern
which will accommodate a 1.5”-3.5”
control.
diameter galvanized steel support
Each antenna is constructed with pipe or tower leg. One ANTLBB
6061-T6 aluminum, and is welded element support boom with all
at the base to a solid, machined required clamps is also included.
aluminum mounting block for
Due to the size and potential wind
maximum strength. A massive
loading of this antenna, tower side
3.5” diameter boom provides
mounting is recommended.
exceptional strength.
NOTE: THIS ANTENNA IS SHIPPED
VIA TRUCK FREIGHT ONLY

ANT44D at 44 MHz
SPECIFICATIONS
0

Frequency (continuous) 41.5-48 MHz 330 2.6 dBd 30

-3

Power rating (typ.) 500 watts

300 -10 60

Impedance 50 ohms
-20

VSWR 1.5:1 or less 270 90

Pattern Offset circular

Lightning protection DC Ground 240 120

Termination N-Male or 7-16 DIN (opt.)

on harness feed cable 210 150
180
Gain (typ.) 2.5 dBd H-Plane gain 2.6 dBd
Vertical beamwidth 78 degrees 1/4 wl. spacing from tower
Horizontal beamwidth Dependent on pattern
Dipole dimensions (H x W) 120 x 9 in.
Boom dimensions (L x Dia.) 78 x 3.5 in.
Weight (antenna + clamps) 41 lb.
Wind rating / 0.5” ice 125 / 100 MPH
Maximum exposed area 3.2 ft.²
Lateral thrust at 100 MPH 129 lb

All specifications subject

238 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7107 Rev. 10/13
 45 - 54 MHz

ANT50D
DIPOLE ANTENNA
7
The Telewave ANT50D is a rugged, Each antenna is also completely

DIPOLES
high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF lowband coating, which resists water and ice
services, including public safety, buildup, and provides exceptional
utilities, military communication, protection from corrosive gases,
and amateur radio. This antenna UV radiation, salt spray, acid rain
provides 9 MHz bandwidth with and windblown abrasives.
no tuning required. The horizontal
ANT50D antennas include
pattern is adjustable, and multiple
ANTC482 mounting hardware
element s can be stacked for
which will accommodate a 1.5”-3.5”
inc rea s e d gain and pat ter n
diameter galvanized steel support
control.
pipe or tower leg. Due to the size
Each antenna is constructed with and potential wind loading of this
6061-T6 aluminum, and is welded antenna, tower side mounting is
at the base to a solid, machined recommended.
aluminum mounting block for
maximum strength. A massive
3.5” diameter boom provides
exceptional strength.

NOTE: THIS ANTENNA IS SHIPPED

VIA TRUCK FREIGHT ONLY
0
330 2.6 dBd 30
-3

300 -10 60

-20
SPECIFICATIONS
270 90

Frequency (continuous) 45-54 MHz

Power rating (typ.) 500 watts
240 120

Impedance 50 ohms
VSWR 1.5:1 or less 210
180
150

Pattern Adjustable: offset circular or cardioid H-Plane gain 2.6 dBd

1/4 wl. spacing from tower
Lightning protection DC Ground
Termination N-Male or 7-16 DIN (opt.) ANT50D at 49 MHz
on harness feed cable 0
330 30
Gain (dependent on pattern) 1-2.5 dBd 0.7 dBd
-3

Vertical beamwidth 78° 300 -10 60

Horizontal beamwidth Dependent on pattern 2.2 dBd

-20
2.2 dBd

Dipole dimensions (H x W) 108 x 9 in. 270 90

Boom dimensions (L x Dia.) 96 x 3.5 in.

Weight (antenna + clamps) 53 lb. 240 120

Wind rating / 0.5” ice 125 / 100 MPH

-3.5 dBd

210 150

Maximum exposed area 3.2 ft.² 180

H-Plane gain 0.7 dBd

Lateral thrust at 100 MPH 129 lb 3/8 wl. spacing from tower

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 239
TWDS-7067 Rev. 10/13
 63 - 78 MHz

ANT70D
DIPOLE ANTENNA

The Telewave ANT70D is a rugged, Each antenna is also completely

high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF midband coating, which resists water and ice
services, including utilities, paging buildup, and provides exceptional
links, control stations, and military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 15 MHz bandwidth with and windblown abrasives.
no tuning required. The horizontal
All components are at DC ground
pattern is adjustable, and multiple
potential for lightning protection.
element s can be stacked for
A full clamp set is included for
inc rea s e d gain and pat ter n
mounting to a 1.5”-3.5” diameter
control.
galvanized steel support pipe or
Each antenna is constructed with tower leg.
6061-T6 aluminum, and is welded at
the base for maximum strength.

0
330 2.6 dBd 30
-3

300 -10 60

SPECIFICATIONS -20

Frequency (continuous) 63-78 MHz 270 90

Power rating (typ.) 500 watts

Impedance 50 ohms 240 120

VSWR 1.5:1 or less

210 150
Pattern Adjustable for offset circular, 180

cardioid, or bidirectional H-Plane gain 2.6 dBd

1/4 wl. spacing from tower
Lightning protection DC Ground
Termination N-Male or 7-16 DIN (opt.) ANT70D at 70 MHz
on harness feed cable 0

Gain (dependent on pattern) 1-2.5 dBd 330

0.7 dBd
-3
30

Vertical beamwidth 78° 300 60

-10

Horizontal beamwidth Dependent on pattern 2.2 dBd

-20
2.2 dBd

Dipole dimensions (H x W) 76 x 7 in. 270 90

Boom dimensions (L x Dia.) 84 x 2.25 in.

Weight (antenna + clamps) 21 lb. 240 120

Wind rating / 0.5” ice 125 / 100 MPH -3.5 dBd

210 150
Maximum exposed area 2.7 ft.² 180
H-Plane gain 0.7 dBd
Lateral thrust at 100 MPH 109 lb 3/8 wl. spacing from tower
All specifications subject
240 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7098 Rev. 3/12
 66 - 88 MHz

ANT75D
DIPOLE ANTENNA
7
The Telewave ANT75D is a rugged, Each antenna is also completely

DIPOLES
high-performance single dipole sealed with our high-tech Txylan™
antenna designed for VHF midband coating, which resists water and ice
services, including utilities, paging buildup, and provides exceptional
links, control stations, and military protection from corrosive gases,
communication. This antenna UV radiation, salt spray, acid rain
provides 22 MHz bandwidth with and windblown abrasives.
no tuning required. The horizontal
All components are at DC ground
pattern is adjustable, and multiple
potential for lightning protection.
element s can be stacked for
A full clamp set is included for
inc rea s e d gain and pat ter n
mounting to a 1.5”-3.5” diameter
control.
galvanized steel support pipe or
Each antenna is constructed with tower leg.
6061-T6 aluminum, and is welded
at the base for maximum strength.

0
330 30
-3

300 -10 60

SPECIFICATIONS -20

Frequency (continuous) 66-88 MHz 270 90

Power rating (typ.) 500 watts

Impedance 50 ohms 240 120

VSWR 1.5:1 or less

210 150
Pattern Adjustable: Offset circular, 180

cardioid, or bidirectional H-Plane gain 2.6 dBd

1/4 wl. spacing from tower
Lightning protection DC Ground
Termination N-Male or 7-16 DIN (opt.) ANT75D at 75 MHz
on harness feed cable 0
330 30
Gain (dependent on pattern) 1-2.5 dBd -3

Vertical beamwidth 78° 300 -10 60

Horizontal beamwidth Dependent on pattern -20

Dipole dimensions (H x W) 72 x 7 in. 270 90

Boom dimensions (L x Dia.) 65 x 2.25 in.

Weight (antenna + clamps) 21 lb. 240 120

Wind rating / 0.5” ice 125 / 100 MPH

210 150
Maximum exposed area 2.3 ft.² 180

H-Plane gain 0.7 dBd

Lateral thrust at 100 MPH 92 lb 3/8 wl. spacing from tower
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 241
TWDS-7076 Rev. 8/12
 88 - 108 MHz

ANT90D
DIPOLE ANTENNA - FM BROADCAST

The Telewave ANT90D is a rugged, buildup, and provides exceptional

high-performance single dipole protection from corrosive gases,
antenna designed for the FM UV radiation, salt spray, acid rain
broadcast band. This antenna and windblown abrasives.
provides 20 MHz bandwidth with
All components are at DC ground
no tuning required. The horizontal
potential for lightning protection.
pattern is adjustable, and multiple
A full clamp set is included for
element s can be stacked for
mounting to a 1.5”-3.5” diameter
increased gain and pattern control.
galvanized steel support pipe or
This antenna is ideal for LPFM and
tower leg.
translator stations for fill-in or small-
market coverage. Up to 15 degrees of electrical uptilt
or downtilt can be specified for
Each dipole element is constructed
multiple element arrays. Desired
with 6061-T6 aluminum, and welded
tilt angle must be included with
at the base for maximum strength.
the order, and consultation with
Each element is also completely
our antenna engineering staff is
sealed with our high-tech Txylan™
requested.
coating, which resists water and ice

0
330 30
-3

300 -10 60
SPECIFICATIONS
-20
Frequency (continuous) 88-108 MHz
270 90
Power rating (typ.) 500 watts
Impedance 50 ohms
240 120
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, 210 150
180
cardioid, or bidirectional
H-Plane, Gain = 2.1 dBd
Lightning protection DC Ground Spaced 1/4 wl. from mast
Termination N-Male or 7-16 DIN (opt.) on
harness feed cable ANT90D at 98 MHz
0
Gain (dependent on pattern) 1 - 2.05 dBd 330 30
-3
Vertical beamwidth 1/4 wl. - 70°, 1/2 wl. - 73°
300 60
3/8 wl. - 84° -10

Horizontal beamwidth 1/4 wl. - 210°, 1/2 wl. - 88° -20

3/8 wl. - 240° 270 90

Dimensions (H x mast distance) max 56 x 57 in.

Weight (antenna + clamps) 18 lb. 240 120

Wind rating / 0.5” ice 125 / 100 MPH

210 150
Maximum exposed area 1.9 ft.² 180

H-Plane, Gain = 1.9 dBd

Lateral thrust at 100 MPH 74 lb. Spaced 3/8 wl. from mast
All specifications subject
242 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7028 Rev. 11/08
 110 - 138 MHz

ANT120D, D3
DIPOLE AND DIPOLE ARRAY
7
The Telewave ANT120D series radiation, salt spray, acid rain and

DIPOLES
con s i s t s of a r u g g e d, hig h - windblown abrasives. The phasing
performance single dipole and harness is fully sealed by Telewave’s
dual dipole array with a precision Millenium Seal™ technology.
phasing harness, designed for
All components are at DC ground
aircraft communications, telemetry,
potential for lightning protection.
and military applications. The
Each dipole element includes a
horizontal pattern is adjustable, and
heavy-duty custom clamp set for
each element can be configured
mounting to a 1.5”-2.5” diameter
for increased gain and pattern
galvanized steel support pipe or
control.
tower leg.
ANT120D
Each dipole element is constructed
Up to 15 degrees of electrical
with 6061-T6 aluminum, and welded
uptilt or downtilt may be specified
at the base for maximum strength.
for D3 models. Desired tilt angle
Each element is also completely
must be included with the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
buildup, and provides exceptional
protection from corrosive gases, UV
COMMON SPECIFICATIONS
Frequency (continuous) 110-138 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating (D/D3) 150/125 MPH
Impedance 50 ohms (with 0.5” ice) (D/D3) 125/100 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT120D ANT120D3
Gain (dependent on pattern) 1-2.5 dBd 3-5.6 dBd
Vertical beamwidth (3/8 wl.) 78° 34° ANT120D3
Dimensions (H x D) max 45 x 45 in. 119 x 45 in. (Harness not shown)
Support mast is
Weight (antenna + clamps) 7 lb. 15 lb. customer-supplied
Maximum exposed area 0.91 ft.² 1.9 ft.²
Lateral thrust at 100 MPH 36 lb. 75 lb.
Electrical uptilt / downtilt N/A 1-15°

330
0
30
ANT120D 330
0
30 330
0
30
ANT120D3 330
0
30
-3 -3 -3 -3

300 -10 60 300 -10 60 300 -10 60 300 -10 60

-20 -20 -20 -20

270 90 270 90 270 90 270 90

240 120 240 120 240 120 240 120

210 150 210 150 210 150 210 150

180 180 180 180

H-Plane gain 2.4 dBd H-Plane gain 1.9 dBd H-Plane gain 6.0 dBd H-Plane gain 5.6 dBd
Spaced 1/4 wl. from mast Spaced 3/8 wl. from mast Spaced 1/4 wl. from mast Spaced 3/8 wl. from mast
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 243
TWDS-7060 Rev. 6/12
 138 - 174 MHz

ANT150D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT150D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum per formance. harness is fully sealed by Telewave’s
The horizontal pattern is field- Millenium Seal™ technology.
adjustable for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for applications including trunking,
mounting to a 1.5”-2.5” diameter
business, public safety, and amateur
galvanized steel support pipe or
radio.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each element is also completely
must be included with the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane: Gain 9.1 dBd H-Plane: Gain 9.1 dBd H-Plane: Gain 8.5 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

COMMON SPECIFICATIONS
Frequency (continuous) 138-174 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH ANT150D6-9
(Harness not shown)
VSWR 1.5:1 or less
Support mast is
Pattern Adjustable: Offset circular, cardioid, or bidirectional customer-supplied
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL ANT150D ANT150D3 ANT150D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 78° 37° 18°
Dimensions (H x D) max 34 x 33 in. 89 x 33 in. 195 x 33 in.
Weight (antenna + clamps) 6 lb. 14 lb. 28 lb.
Maximum exposed area 0.73 ft.² 1.6 ft.² 3.3 ft.²
Lateral thrust at 100 MPH 29 lbs 64 lbs 134 lbs
Electrical uptilt or downtilt N/A 1-15° 1-15°

All specifications subject

244 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7045 Rev. 4/12
 138 - 174 MHz

ANT150D7-12
DIPOLE ARRAY 7 TO 12 dBd
7
The Telewave ANT150D7-12 is an sealed with our high-tech Txylan™

DIPOLES
8-element dipole array antenna coating, which resists water and ice
with a precision phasing harness buildup, and provides exceptional
for optimum performance. The protection from corrosive gases, UV
horizontal pattern is field-adjustable, radiation, salt spray, acid rain and
to accommodate any current or windblown abrasives. The phasing
future coverage requirements. The harness is fully sealed by Telewave’s
high gain, wide bandwidth, and Millenium Seal™ technology.
high efficiency of the ANT150D7-12
All components are at DC ground
are ideal for many applications,
for lightning protection, and each
including trunking, business, public
element includes a heavy-duty
safety, and amateur radio.
custom clamp set for mounting to a
Each antenna consists of two 1.5”-2.5” diameter galvanized steel
arrays of 4 elements with a power support pipe or tower leg.
divider in the center, which greatly
reduces feedline losses. Each
dipole element is constructed with
6061-T6 aluminum, and welded at
the base for maximum strength.
Each antenna is also completely
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 12.2 dBd H-Plane gain 11.8 dBd H-Plane gain 12.7 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

SPECIFICATIONS
Frequency (continuous) 138-174 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Female or 7-16 DIN (opt.) on power divider
Gain (dependent on pattern) 7-12 dBd
Vertical beamwidth (3/8 wl.) 8°
Dimensions (H x D) max 407 x 36 in. (1/2 wl. spacing)
Weight (antenna + clamps) 60 lb. ANT150D7-12
Maximum exposed area 6.8 ft.² (Harness not shown)
Lateral thrust at 100 MPH 282 lb. Support mast is
customer-supplied

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 245
TWDS-7070 Rev. 2/09
 216 - 252 MHz

ANT220D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT220D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
wireless PTC, trunking, business,
galvanized steel support pipe or
public safety, and amateur radio.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane: Gain 9.1 dBd H-Plane: Gain 9.1 dBd H-Plane: Gain 8.5 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower
COMMON SPECIFICATIONS
Frequency (continuous) 216-252 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH ANT220D6-9
Impedance 50 ohms (with 0.5” ice) 150 MPH (Harness not shown)
VSWR 1.5:1 or less Support mast is
customer-supplied
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT220D ANT220D3 ANT220D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 spacing ) 78° 37° 18°
Dimensions (H x D) max 23 x 28 in. 61 x 28 in. 137 x 28 in.
Weight (antenna + clamps) 5 lb. 11 lb. 23 lb.
Maximum exposed area 0.51 ft.² 1.1 ft.² 2.3 ft.²
Lateral thrust at 100 MPH 20 lb. 43 lb. 94 lb.
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

246 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7044 Rev. 7/11
 230 - 330 MHz

ANT275D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
7
The Telewave ANT275D series buildup, and provides exceptional

DIPOLES
consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
military communications, trunking,
galvanized steel support pipe or
and business.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.1 dBd H-Plane gain 9.0 dBd H-Plane gain 8.8 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

COMMON SPECIFICATIONS
Frequency (continuous) 230-330 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH ANT275D6-9
(Harness not shown)
Impedance 50 ohms (with 0.5” ice) 150 MPH Support mast is
VSWR 1.5:1 or less customer-supplied
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT275D ANT275D3 ANT275D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 78° 34° 15°
Dimensions (H x D) (max) 19 x 20 in. 56 x 20 in. 120 x 20 in.
Weight (antenna + clamps) 6 lb. 11 lb. 19 lb.
Maximum exposed area 0.45 ft.² 1.0 ft.² 2.1 ft.²
Lateral thrust at 100 MPH 18 lb. 39 lb. 83 lb.
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 247
TWDS-7079 Rev. 5/11
 300 - 360 MHz

ANT350D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT350D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
military communications, trunking,
galvanized steel support pipe or
and business.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.1 dBd H-Plane gain 9.1 dBd H-Plane gain 8.5 dBd ANT350D6-9
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower (Harness not shown)
Support mast is
COMMON SPECIFICATIONS
customer-supplied
Frequency (continuous) 300-360 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT350D ANT350D3 ANT350D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 71° 34° 15°
Dimensions (H x D) (max) 17 x 17 in. 43 x 17 in. 89 x 17 in.
Weight (antenna + clamps) 6 lb. 13 lb. 18 lb.
Maximum exposed area 0.36 ft.² 0.78 ft.² 1.7 ft.²
Lateral thrust at 100 MPH 15 lb. 34 lb. 73 lb.
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

248 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7040 Rev. 5/09
 345 - 405 MHz

ANT375D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
7
The Telewave ANT375D series buildup, and provides exceptional

DIPOLES
consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
military communications, TETRA,
galvanized steel support pipe or
and business.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.17 dBd H-Plane gain 9.1 dBd H-Plane gain 8.5 dBd ANT375D6-9
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower (Harness not shown)
Support mast is
COMMON SPECIFICATIONS customer-supplied
Frequency (continuous) 345-405 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT375D ANT375D3 ANT375D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 71° 34° 15°
Dimensions (H x D) (max) 16 x 17 in. 39 x 17 in. 87 x 17 in.
Weight (antenna + clamps) 7 lb. 15 lb. 25 lb.
Maximum exposed area 0.35 ft.² 0.76 ft.² 1.7 ft.²
Lateral thrust at 100 MPH 14 lb. 32 lb. 70 lb.
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 249
TWDS-7071 Rev. 5/09
 360 - 450 MHz

ANT400D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT400D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
military communications, TETRA
galvanized steel support pipe or
trunking, and amateur radio.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.07 dBd H-Plane gain 9.10 dBd H-Plane gain 8.46 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower ANT400D6-9
(Harness not shown)
COMMON SPECIFICATIONS Support mast is
Frequency (continuous) 360-450 MHz Lightning protection DC Ground customer-supplied
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT400D ANT400D3 ANT400D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 71° 34° 15°
Dimensions (H x D) (max) 15 x 14 in. 36 x 14 in. 74 x 14 in.
Weight (antenna + clamps) 6 lbs 13 lbs 18 lbs
Maximum exposed area 0.34 ft.² 0.72 ft.² 1.5 ft.²
Lateral thrust at 100 MPH 13 lbs 30 lbs 64 lbs
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

250 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7048 Rev. 5/09
 380 - 470 MHz

ANT425D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
7
The Telewave ANT425D series buildup, and provides exceptional

DIPOLES
consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
military communications, trunking,
galvanized steel support pipe or
public safety, and amateur radio.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.02 dBd H-Plane gain 9.08 dBd H-Plane gain 9.12 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower ANT425D6-9
(Harness not shown)
COMMON SPECIFICATIONS Support mast is
Frequency (continuous) 380-470 MHz Lightning protection DC Ground customer-supplied
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT425D ANT425D3 ANT425D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 71° 34° 15°
Dimensions (H x D) (max) 13 x 17 in. 34 x 17 in. 77 x 17 in.
Weight (antenna + clamps) 7 lbs 15 lbs 32 lbs
Maximum exposed area 0.34 ft.² 0.72 ft.² 1.5 ft.²
Lateral thrust at 100 MPH 13 lbs 30 lbs 64 lbs
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 251
TWDS-7105 Rev. 5/12
 406 - 512 MHz

ANT450D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT450D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
trunking, business, public safety,
galvanized steel support pipe or
government, and amateur radio.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.1 dBd H-Plane gain 9.1 dBd H-Plane gain 8.5 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower
ANT450D6-9
COMMON SPECIFICATIONS (Harness not shown)
Frequency (continuous) 406-512 MHz Lightning protection DC Ground Support mast is
Power rating (typ.) 500 watts Wind rating 175 MPH customer-supplied
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT450D ANT450D3 ANT450D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 71° 34° 15°
Dimensions (H x D) (max) 13 x 12 in. 31 x 12 in. 71 x 12 in.
Weight (antenna + clamps) 6 lbs 13 lbs 18 lbs
Maximum exposed area 0.27 ft.² 0.68 ft.² 1.4 ft.²
Lateral thrust at 100 MPH 11 lbs 28 lbs 60 lbs
Electrical uptilt / downtilt N/A 1-15° 1-15°

All specifications subject

252 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7033 Rev. 5/09
 406 - 512 MHz

ANT450D7-12
DIPOLE ARRAY 7 TO 12 dBd
7
The Telewave ANT450D7-12 is an sealed with our high-tech Txylan™

DIPOLES
8-element dipole array antenna coating, which resists water and ice
with a precision phasing harness buildup, and provides exceptional
for optimum performance. The protection from corrosive gases, UV
horizontal pattern is field-adjustable, radiation, salt spray, acid rain and
to accommodate any current or windblown abrasives. The phasing
future coverage requirements. The harness is fully sealed by Telewave’s
high gain, wide bandwidth, and Millenium Seal™ technology.
high efficiency of the ANT450D7-12
All components are at DC ground
are ideal for many applications,
for lightning protection, and each
including trunking, business, public
element includes a heavy-duty
safety, and amateur radio.
custom clamp set for mounting to a
Each antenna consists of two 1.5”-2.5” diameter galvanized steel
arrays of 4 elements with a power support pipe or tower leg.
divider in the center, which greatly
reduces feedline losses. Each
dipole element is constructed with
6061-T6 aluminum, and welded at
the base for maximum strength.
Each antenna is also completely
0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 12.2 dBd H-Plane gain 11.8 dBd H-Plane gain 12.7 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

SPECIFICATIONS
Frequency (continuous) 406-512 MHz Lightning protection DC Ground
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Female or 7-16 DIN (opt.) on power divider
Gain (dependent on pattern) 7-12 dBd
Vertical beamwidth (3/8 wl.) 7.5°
Dimensions (H x D) max 148 x 12 in. (1/2 wl. spacing)
Weight (antenna + clamps) 36 lb.
Maximum exposed area 2.9 ft.² ANT450D7-12
(Harness not shown)
Lateral thrust at 100 MPH 135 lb.
Support mast is
customer-supplied

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 253
TWDS-7034 Rev. 2/09
 470 - 550 MHz

ANT500D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT550D series buildup, and provides exceptional

consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
trunking, business, public safety,
galvanized steel support pipe or
and government communication.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.

0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.1 dBd H-Plane gain 9.1 dBd H-Plane gain 8.5 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower ANT500D6-9
(Harness not shown)
COMMON SPECIFICATIONS Support mast is
Frequency (continuous) 470-550 MHz Lightning protection DC Ground customer-supplied
Power rating (typ.) 500 watts Wind rating 175 MPH
Impedance 50 ohms (with 0.5” ice) 150 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT500D ANT500D3 ANT500D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 78° 33° 18°
Dimensions (H x D) (max) 13 x 11 in. 31 x 11 in. 65 x 11 in.
Weight (antenna + clamps) 7 lb. 14 lb. 28 lb.
Maximum exposed area 0.26 ft.² 0.56 ft.² 1.2 ft.²
Lateral thrust at 100 MPH 10 lb. 22 lb. 50 lb.

All specifications subject

254 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7025 Rev. 11/08
 700 - 825 MHz

ANT750D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd
7
The Telewave ANT750D series buildup, and provides exceptional

DIPOLES
consist s of single, dual, and protection from corrosive gases, UV
4-element dipole array antennas radiation, salt spray, acid rain and
with a precision phasing harness windblown abrasives. The phasing
for optimum performance. The harness is fully sealed by Telewave’s
antenna horizontal pattern is field- Millenium Seal™ technology.
adjustable, for any current or future
All components are at DC ground
coverage requirements. The wide
potential for lightning protection.
bandwidth and high efficiency of
Each dipole element includes a
these antennas make them ideal
heavy-duty custom clamp set for
for many applications, including
mounting to a 1.5”-2.5” diameter
trunking, business, public safety,
galvanized steel support pipe or
and goverment communication.
tower leg.
Each dipole element is constructed
Up to 15 degrees of electrical uptilt
with 6061-T6 aluminum, and welded
or downtilt may be specified for D3
at the base for maximum strength.
or D6-9 models. Desired tilt angle
Each antenna is also completely
must be included on the order,
sealed with our high-tech Txylan™
and consultation with our antenna
coating, which resists water and ice
engineering staff is requested.

0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

H-Plane gain 9.1 dBd H-Plane gain 8.9 dBd H-Plane gain 9.2 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

COMMON SPECIFICATIONS ANT750D6-9

(Harness not shown)
Frequency (continuous) 700-825 MHz Lightning protection DC Ground Support mast is
Power rating (typ.) 500 watts Wind rating 200 MPH customer-supplied
Impedance 50 ohms (with 0.5” ice) 175 MPH
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Male or 7-16 DIN (opt.) on harness feed cable
MODEL SPECIFICATIONS ANT750D ANT750D3 ANT750D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 68° 33° 18°
Dimensions (H x D) (max) 8 x 7 in. 19 x 7 in. 42 x 7 in.
Weight (antenna + clamps) 7 lb. 14 lb. 28 lb.
Maximum exposed area 0.17 ft.² 0.42 ft.² 0.91 ft.²
Lateral thrust at 100 MPH 7 lb. 17 lb. 38 lb.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 255
TWDS-7026 Rev. 11/08
 800 - 1000 MHz

ANT900D, D3, D6-9

DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd

The Telewave ANT900D series Each antenna is also completely

consist s of single, dual, and sealed with our high-tech Txylan™
4-element dipole array antennas coating, which resists water and ice
with a precision phasing harness buildup, and provides exceptional
for optimum performance. The protection from corrosive gases,
antenna horizontal pattern is UV radiation, salt spray, acid rain
field-adjustable, for any current and windblown abrasives.
or future coverage requirements.
Each element includes a heavy-duty
The exceptionally wide bandwidth
custom clamp set for mounting to a
and high ef f icienc y of these
0.5”-1.5” diameter galvanized steel
antennas make them ideal for many
support pipe or tower leg.
applications, including trunking,
cellular, data, and paging. Up to 15 degrees of electrical uptilt
or downtilt may be specified for D3
Each dipole element is constructed
or D6-9 models. Desired tilt angle
with 6061-T6 aluminum, fully welded
must be included on the order,
to prevent intermodulation. The
and consultation with our antenna
2 and 4 element arrays utilize a
engineering staff is requested.
power divider for minimum loss.

0 0 0
330 30 330 30 330 30
-3 -3 -3

300 -10 60 300 -10 60 300 -10 60

-20 -20 -20

270 90 270 90 270 90

ANT900D6-9
240 120 240 120 240 120 (Harness not shown)
Support mast is
210
180
150 210
180
150 210
180
150
customer-supplied
H-Plane gain 9.27 dBd H-Plane gain 8.7 dBd H-Plane gain 9.1 dBd
1/4 wl. spacing from tower 1/2 wl. spacing from tower 3/8 wl. spacing from tower

COMMON SPECIFICATIONS
Frequency (continuous) 800-1000 MHz Wind rating 200 MPH
Power rating (typ.) 500 watts (with 0.5” ice) 175 MPH
Impedance 50 ohms
VSWR 1.5:1 or less
Pattern Adjustable: Offset circular, cardioid, or bidirectional
Termination N-Female or 7-16 DIN (opt.) on power divider
MODEL SPECIFICATIONS ANT900D ANT900D3 ANT900D6-9
Gain (dependent on pattern) 1-2.5 dBd 3-6 dBd 6-9 dBd
Vertical beamwidth (3/8 wl.) 84° 35° 17°
Dimensions (H x D) (max) 8 x 6 in. 21 x 6 in. 49 x 6 in.
Weight (antenna + clamps) 3 lb. 7 lb. 11 lb.
Maximum exposed area 0.1 ft.² 0.2 ft.² 0.4 ft.²
Lateral thrust at 100 MPH 4 lb. 9 lb. 20 lb.

All specifications subject

256 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7019 Rev. 11/08
FOLDED DIPOLE ANTENNAS 138-825 MHz
MOUNTING INSTRUCTIONS
7

DIPOLES
WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let
go and stay away. Call the utility company for assistance. Always use safety devices for
tower climbing. Ensure that the tower structure is well grounded for lightning protection.

PARTS LIST (for single dipole element):

(1) Dipole and clamp set (1) 1/4”-20 hex bolt (1) 1/4”-20 lock nut
(2) 3/8” x 3.5” hex bolt (2) 3/8” hex nut (2) 3/8” split lock washer
(1) Anti-seize compound

ASSEMBLY INSTRUCTIONS
1. Remove components from shipping box and lay out the dipole and cable assemblies, ideally in a large, sheltered
area. Arrange the assemblies in order as cable lengths allow.
2. Refer to the diagram. Slide the boom over the dipole hub, and align the holes in the boom with the holes in the
hub. Apply anti-seize compound to the bolt end, then install and tighten the 1/4"-20 bolt and lock nut. Press the
end plug located on the dipole feed cable into the end of the boom until it is firmly seated.
3. Refer to the appropriate Dipole Pattern Adjustment sheet for the frequency range of the antenna. Using the
chart titled "Dipole Mounting and Mast Specifications", measure and mark the support structure for the proper
dipole element spacing. Mount each dipole assembly to the mast with clamps as shown in the diagram. Locate
the drain hole on each element, and be certain it is pointing down.
4. Refer to the chart titled "Mast to Dipole Dimensions", and determine the proper horizontal element spacing
from the mast or support structure for the desired coverage pattern. At least 1/2 inch of the boom should be
visible on the back side of the clamps.
5. Apply anti-seize compound to the bolt ends, then secure the dipole assemblies to the support with the supplied
3/8" nuts, washers and bolts, while adjusting each dipole position on the support. Tighten each nut until the lock
washer is flat, then add 1/2 turn. Be sure to properly seal the input connector with waterproof tape or other
sealing material. See Telewave TWDS-0502 for a recommended method of connector sealing.
6. Secure the cable assembly to the support.
1/2 inch of the
boom visible Dipole
Element

Dipole
Hub
Clamp
Assemblies
1/4"-20
Boom Bolt / Nut

Phasing
Harness End
Drain Plug Drain
Holes Hole
Coax

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 257
TWDS-7089 Rev. 3/11
 30 - 300 MHz

DIPOLE PATTERN ADJUSTMENT

Telewave folded dipoles are field adjustable to provide different horizontal patterns and gain values. The horizontal
spacing from tower between the dipole and the support mast or tower leg controls this adjustment. Review the
patterns below to determine which is best suited to your range area requirements. Use the chart on the next
page to find the appropriate dimension for antenna to mast spacing. The drawing at the bottom shows how this
measurement is made and the vertical spacing to be used for multi-element arrays.

Horizontal radiation patterns

0 0 0

330 30 330 30 330 30

-3 -3 -3

300 60 300 60 300 -10 60

-10 -10

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

Offset Circular Cardioid Bi-directional

1/4 wavelength spacing 3/8 wavelength spacing 1/2 wavelength spacing

Horizontal
Spacing
Measured distance
from the face of the
mast to the middle
of the dipole loop.
Mast
Extension

Vertical
spacing

Mast
Extension
Drain Holes

IMPORTANT: Be sure that the drain holes are on the bottom when the elements are installed.

All specifications subject

258 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7057 Rev. 6/12
 30 - 300 MHz

DIPOLE PATTERN ADJUSTMENT 7

DIPOLE MOUNTING AND MAST SPECIFICATIONS

DIPOLES
Mast lengths shown are minimum acceptable lengths to insure proper pattern control. Mast extension is applied at top
and bottom of array. Longer masts are acceptable, but the dipole or array must be centered on the support to prevent
beam tilt. The clamps provided with the dipoles will work properly to attach the dipole boom to a mast that is between
1.5 to 2.5 inches in diameter. To attach to smaller supports (1-1.5” diameter), use ANTS420 shims. This allows direct
mounting to small towers such as the Rohn 25 and 45.
MAST MINIMUM LENGTH AND ELEMENT VERTICAL SPACING (at midband)
ANTENNA MAST LENGTH MAST EXTENSION VERTICAL SPACING MINIMUM MAST TYPE
ANT37D
ANT40D CONTACT TELEWAVE FOR MOUNTING ADVICE
ANT50D
ANT70D 6'-7” 3'-3.5” N/A 2.0” Schedule 40 Galvanized Pipe
ANT75D 6'-7” 3'-3.5” N/A 2.0” Schedule 40 Galvanized Pipe
ANT75D3 16'-1” 3’-3.5” 9’-7” 2.0” Schedule 40 Galvanized Pipe
ANT90D 5'-6” 2'-9” N/A 2.0” Schedule 40 Galvanized Pipe
ANT90D3 12'-11” 2'-9” 7’-5” 2.0” Schedule 40 Galvanized Pipe
ANT120D 4'-2” 2'-1” N/A 1.5” Schedule 40 Galvanized Pipe
ANT120D3 10' 23” 6’-2” 2.0” Schedule 40 Galvanized Pipe
ANT120D6-9 21’ 23” 6’-2” 2.0” Schedule 40 Galvanized Pipe
ANT150D 3' 18” N/A 1.5” Schedule 40 Galvanized Pipe
ANT150D3 7'-5” 18” 4’-5” 1.5” Schedule 40 Galvanized Pipe
ANT150D6-9 16'-3” 18” 4’-5” 2.0” Schedule 40 Galvanized Pipe
ANT150D7-12 33'-11” 18” 4’-5” 2.0” Schedule 40 Galvanized Pipe
ANT220D 2'-4” 14” N/A 1.5” Schedule 40 Galvanized Pipe
ANT220D3 5'-6” 14” 3’-1.5” 1.5” Schedule 40 Galvanized Pipe
ANT220D6-9 11'-8” 14” 3’-1.5” 1.5” Schedule 40 Galvanized Pipe
ANT275D 2' 12” N/A 1.5” Schedule 40 Galvanized Pipe
ANT275D3 4'-8” 12” 2’-8” 1.5” Schedule 40 Galvanized Pipe
ANT275D6-9 10’ 12” 2’-8” 1.5” Schedule 40 Galvanized Pipe

ELEMENT HORIZONTAL SPACING FROM TOWER (at midband)

MODEL 1/4 wl. OFFSET CIRCULAR 3/8 wl. CARDIOID 1/2 wl. BI-DIRECTIONAL
ANT37D 6’-3” N/A N/A
ANT40D 5’-9” N/A N/A
ANT50D 4’-7” 6’-11” N/A
ANT70D 3’-3” 5’ MAX EXTENSION
ANT75D, D3 3’ 4’-6” MAX EXTENSION
ANT90D, D3 2’-4” 3’-6” 4’-9”
ANT120D, D3, D6-9 22” 2’-9” 3’-9”
ANT150D, D3, D6-9, D7-12 18” 2’-3” 2’ 9”
ANT220D, D3, D6-9 12” 18” 2’
ANT275D, D3, D6-9 10” 15” 20”
NOTE: The physical characteristics of large dipoles require a correction factor from calculated values for mast
spacing. The dimensions in the above table include this correction.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 259
TWDS-7057 Rev. 6/12
 300 - 1000 MHz

DIPOLE PATTERN ADJUSTMENT

Telewave folded dipoles are field adjustable to provide different horizontal patterns and gain values. The horizontal
spacing from tower between the dipole and the support mast or tower leg controls this adjustment. Review the
patterns below to determine which is best suited to your range area requirements. Use the chart on the next
page to find the appropriate dimension for antenna to mast spacing. The drawing at the bottom shows how this
measurement is made and the vertical spacing to be used for multi-element arrays.

Horizontal radiation patterns

0 0 0

330 30 330 30 330 30

-3 -3 -3

300 60 300 60 300 -10 60

-10 -10

-20 -20 -20

270 90 270 90 270 90

240 120 240 120 240 120

210 150 210 150 210 150

180 180 180

Offset Circular Cardioid Bi-directional

1/4 wavelength spacing 3/8 wavelength spacing 1/2 wavelength spacing

Horizontal
Spacing
Measured distance
from the face of the
mast to the middle
of the dipole loop.
Mast
Extension

Vertical
spacing

Mast
Extension
Drain Holes

IMPORTANT: Be sure that the drain holes are on the bottom when the elements are installed.

All specifications subject

260 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7058 Rev. 6/12
 300 - 1000 MHz

DIPOLE PATTERN ADJUSTMENT 7

DIPOLE MOUNTING AND MAST SPECIFICATIONS

DIPOLES
Mast lengths shown are minimum acceptable lengths to insure proper pattern control. Mast extension is applied at top
and bottom of array. Longer masts are acceptable, but the dipole or array must be centered on the support to prevent
beam tilt. The clamps provided with the dipoles will work properly to attach the dipole boom to a mast that is between
1.5 to 2.5 inches in diameter. To attach to smaller supports (1-1.5” diameter), use ANTS420 shims. This allows direct
mounting to small towers such as the Rohn 25 and 45.
MAST MINIMUM LENGTH AND ELEMENT VERTICAL SPACING (at midband)
ANTENNA MAST LENGTH MAST EXTENSION VERTICAL SPACING MINIMUM MAST TYPE
ANT350D 20” 10” N/A 1.5” Schedule 40 Galvanized Pipe
ANT350D3 3’-7” 10” 23” 1.5” Schedule 40 Galvanized Pipe
ANT350D6-9 7’-5” 10” 23” 1.5” Schedule 40 Galvanized Pipe
ANT375D 16” 8” N/A 1.5” Schedule 40 Galvanized Pipe
ANT375D3 3’-3” 8” 24” 1.5” Schedule 40 Galvanized Pipe
ANT375D6-9 7’-3” 8” 24” 1.5” Schedule 40 Galvanized Pipe
ANT400D 15” 7.5” N/A 1.5” Schedule 40 Galvanized Pipe
ANT400D3 3’ 7.5” 22” 1.5” Schedule 40 Galvanized Pipe
ANT400D6-9 6’-2” 7.5” 22” 1.5” Schedule 40 Galvanized Pipe
ANT425D 14” 7” N/A 1.5” Schedule 40 Galvanized Pipe
ANT425D3 2’-11” 7” 21” 1.5” Schedule 40 Galvanized Pipe
ANT425D6-9 6’-5” 7” 21” 1.5” Schedule 40 Galvanized Pipe
ANT450D 13” 6.5” N/A 1.5” Schedule 40 Galvanized Pipe
ANT450D3 2’-7” 6.5” 19.375” 1.5” Schedule 40 Galvanized Pipe
ANT450D6-9 5’-11” 6.5” 19.375” 1.5” Schedule 40 Galvanized Pipe
ANT450D7-12 12’-4” 6.5” 19.375” 1.5” Schedule 40 Galvanized Pipe
ANT500D 13” 6.5” N/A 1.5” Schedule 40 Galvanized Pipe
ANT500D3 2’-7” 6.5” 17.5” 1.5” Schedule 40 Galvanized Pipe
ANT500D6-9 5’-5” 6.5” 17.5” 1.5” Schedule 40 Galvanized Pipe
ANT550D 12” 6” N/A 1.5” Schedule 40 Galvanized Pipe
ANT550D3 1’-10” 5.5” 16” 1.5” Schedule 40 Galvanized Pipe
ANT550D6-9 4’-6” 5.5” 16” 1.5” Schedule 40 Galvanized Pipe
ANT750D 8” 4” N/A 1.5” Schedule 40 Galvanized Pipe
ANT750D3 19” 4” 11.625” 1.5” Schedule 40 Galvanized Pipe
ANT750D6-9 3’-6” 4” 11.625” 1.5” Schedule 40 Galvanized Pipe
ANT900D 6.5” 3.25” N/A 0.5” Schedule 40 Galvanized Pipe
ANT900D3 22” 4” 14” 0.5” Schedule 40 Galvanized Pipe
ANT900D6-9 4’-2” 4” 14” 0.75” Schedule 40 Galvanized Pipe

ELEMENT HORIZONTAL SPACING FROM TOWER (at midband)

MODEL NUMBER 1/4 wl. OFFSET CIRCULAR 3/8 wl. CARDIOID 1/2 wl. BI-DIRECTIONAL
ANT350D, D3, D6-9 8.4” 12.6” 16.8”
ANT375D, D3, D6-9 7.4” 11.1” 14.8”
ANT400D, D3, D6-9 6.9” 10.3” 13.7”
ANT425D, D3, D6-9 7” 10.5” 14”
ANT450D, D3, D6-9, D7-12 6” 9” 12.1”
ANT500D, D3, D6-9 5.4” 8.1” 10.9”
ANT550D, D3, D6-9 5” 7.5” 10”
ANT750D, D3, D6-9 3.7” 5.5” 7.3”
ANT900D, D3, D6-9 3.1” 4.6” 6.2”
All specifications subject
Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 261
TWDS-7058 Rev. 6/12
 138 - 2700 MHz

YAGI ANTENNAS

Telewave Yagi antennas are some of the strongest and most reliable in the industry. These antennas are designed
using sophisticated CAD and pattern modelling software, and manufactured to endure the harshest environments
without failure or degradation of performance. Telewave Yagi antennas are fabricated from all-aluminum or all-brass
stock, using solid elements and heavy-wall tubular booms, with fully welded or soldered joints. For the most extreme
environments, certain models can be fabricated from stainless steel for ultimate durability.
The RF connector is permanently mounted in end of the boom to form a single, integrated unit, except for the Y10H
series, which uses a weatherproof pigtail. A solid internal conductor is sealed within the boom, and feeds a sealed
active element, eliminating any possibility of failure due to corrosion or ice expansion. Telewave Yagi antennas also
feature our high-tech coating called Txylan™, which completely encapsulates all our Yagi antennas, providing total
protection from water, corrosive chemicals, salt spray, and windblown abrasives. This smooth black coating also
dramatically reduces surface friction, reducing and often preventing ice adhesion, while improving absorption of
solar radiation.
The standard connector type is N Female, and a 7-16 DIN-F can be installed as an option for higher power applications.
Gain ranges from 5 to 12 dBd, and higher gains are available on request. Certain models are available with a 90-
®
degree feed option, which allows Heliax or other hardline coax to be terminated directly at the antenna, without
additional flexible jumpers. All Telewave Yagis can be ordered to accommodate vertical or horizontal polarization,
and many models allow the use of our Universal Mount, which provides a high degree of adjustability for mounting
antennas to non-vertical supports. Many models from 450-2700 MHz are small enough to be handheld, and are
ideal for interference location and field testing.

All specifications subject

262 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7042 Rev. 10/13
 138 - 152 MHz

ANT144Y5-WR
YAGI ANTENNA 5 dBd
7
ANT144Y5-WR at 147 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.0 dBd

0
330 30
-3

300 -10 60

-20

270 90

240 120

The Telewave ANT144Y5-WR is from corrosive gases, UV radiation,

a high performance directional salt spray, acid rain and wind-blown 210 150
H-Plane 180
antenna, designed especially for sand. The feed line is protected Gain: 5.0 dBd
point to point as well as point/ within the boom, and the radiating
multipoint applications. This antenna element is completely sealed
produces 5 dBd forward gain with against ice and other hazards with
an excellent front-to-back ratio, and a tough, RF-transparent radome.
solid aluminum elements with 360°
The ANT144Y5-WR includes a
welds prevent intermodulation and
welded vertical plate and mast
provide exceptional strength.
clamp set. A horizontal welded
Eac h antenna is completely plate is optional, or the ANTM400H
protec ted with our high-tech adapter can be used. The clamp
Txylan™ coating, which provides set fits any vertical mast or tower
icing resistance and protection support from 1.5”-3.5” O.D.
SPECIFICATIONS
Frequency (continuous) 138-152 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 38 x 42 in.
Power rating (typ) 500 watts Antenna weight 17 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 20 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 64° / 120° Exposed area (flat plate equiv.) 1.1 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 44 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 263
TWDS-7087 Rev. 10/13
 148 - 174 MHz

ANT150Y7-WR
YAGI ANTENNA 5 dBd

ANT150Y7-WR at 156 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.1 dBd

0
330 30
-3

300 -10 60

-20

270 90

240 120

The Telewave ANT150Y7-WR is from corrosive gases, UV radiation,

a high performance directional salt spray, acid rain and wind-blown H-Plane
210
180
150

antenna, designed especially for sand. The feed line is protected Gain: 5.1 dBd
point to point as well as point/ within the boom, and the radiating
multipoint applications. This antenna element is completely sealed
produces 5 dBd forward gain with against ice and other hazards with
an excellent front-to-back ratio, and a tough, RF-transparent radome.
solid aluminum elements with 360°
The ANT150Y7-WR includes a
welds prevent intermodulation and
welded vertical plate and mast
provide exceptional strength.
clamp set. A horizontal welded
Eac h antenna is completely plate is optional, or the ANTM400H
protec ted with our high-tech adapter can be used. The clamp
Txylan™ coating, which provides set fits any vertical mast or tower
icing resistance and protection support from 1.5”-3.5” O.D.

SPECIFICATIONS
Frequency (continuous) 148-174 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 38 x 40.5 in.
Power rating (typ) 500 watts Antenna weight 16 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 19 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 64° / 114° Exposed area (flat plate equiv.) 1.0 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 41 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

264 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7005 Rev. 10/13
 144 - 174 MHz

ANT150Y10H
YAGI ANTENNA 10 dBd
7
ANT150Y10H at 156 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.1 dBd

0
330 30
-3

300 -10 60

The Telewave ANT150Y10H is a against ice and other hazards. All -20
very rugged, high performance antenna components are at DC
270 90
directional antenna. Six elements ground for lightning protection.
provide a minimum of 10 dBd gain,
The ANT150Y10H includes a heavy
high front-to-back ratio, and wide 240 120

duty clamp set, which allows the

band capability. The elements are
antenna boom to be rotated for 210 150
constructed from solid aluminum H-Plane 180
polarization adjustment. (Please Gain 10.1 dBd
to prevent intermodulation and
contact Telewave if horizontal
provide exceptional strength.
operation is planned.)
Eac h antenna is completely
This clamp set secures the antenna
protec ted with our high-tech
to a vertical or horizontal mast
Txylan™ coating, which provides
or tower support from 1.5”-3.5”
icing resistance and protection
O.D. The antenna is shipped
from corrosive gases, UV radiation, unassembled to reduce cost, and
salt spray, acid rain and wind-blown is easily assembled in the field with
sand. The feed line is protected color coded marks.
within the boom, and the radiating
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 144-174 MHz Elements 6
Gain (typ) 10 dBd Dimensions (L x H) 96 x 40 in.
Power rating (typ) 500 watts Antenna weight 33 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 37 lb.
Front to back ratio (min) 17 dB Wind rating / with 0.5” ice 150 / 100 MPH
Beamwidth V / H 44° / 47° Exposed area (flat plate equiv.) 1.7 ft.²
Directional / Vertical Lateral thrust at 100 MPH
Pattern / Polarization 67 lb.
(Horizontal opt. if specified) (40 psf - flat plate equiv.)
Termination N Male or 7-16 DIN (opt) Bending moment at mast clamp 222 ft. lb.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 265
TWDS-7041 Rev. 10/13
 216 - 240 MHz

ANT220Y7-WR
YAGI ANTENNA 5 dBd

ANT220Y7-WR at 221 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.1 dBd

0
330 30
-3

300 -10 60

-20

270 90
The Telewave ANT220Y7-WR is icing resistance and protection
a high performance directional from corrosive gases, UV radiation,
240 120
antenna, designed especially for salt spray, acid rain and wind-blown
point to point as well as point/ sand. The feed line is protected 210 150

multipoint applications. This antenna within the boom, and the radiating H-Plane 180

produces 5 dBd forward gain with element is completely sealed Gain: 5.1 dBd
an excellent front-to-back ratio, against ice and other hazards with
and solid aluminum elements with a tough, RF-transparent radome.
360° welds prevent intermodulation
The ANT220Y7-WR includes a
and provide exceptional strength.
welded vertical plate and mast
The ANT220Y7-WR is an excellent
clamp set. A horizontal welded
choice for wireless PTC systems in
plate is optional, or the ANTM400H
urban or rural areas.
adapter can be used. The clamp
Eac h antenna is completely set fits any vertical mast or tower
protec ted with our high-tech support from 1.5”-3.5” O.D.
Txylan™ coating, which provides
SPECIFICATIONS
Frequency (continuous) 216-240 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 30 x 30 in.
Power rating (typ) 500 watts Antenna weight 13 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 16 lb.
Front to back ratio (min) 15 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 64° / 114° Exposed area (flat plate equiv.) 0.7 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 28 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

266 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7038 Rev. 10/13
 370 - 410 MHz

ANT390Y5-WR
YAGI ANTENNA 5 dBd
7

YAGIS
ANT390Y5-WR at 390 MHz
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
-90
E-Plane
Gain: 5.05 dBd

0
330 30
-3

The Telewave ANT390Y5-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT390Y5-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120

antenna produces 5 dBd forward

plate is optional, or the ANTM400H
gain with an excellent front-to-back 210 150

adapter can be used. The clamp H-Plane 180

ratio. Solid aluminum elements with Gain: 5.14 dBd

set fits any vertical mast or tower
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 370-410 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 21 x 16 in.
Power rating (typ) 500 watts Antenna weight 4.5 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 8 lb.
Front to back ratio (min) 19 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 60° / 110° Exposed area (flat plate equiv.) 0.530 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 21 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 267
TWDS-7120 Rev. 10/13
 405 - 420 MHz

ANT410Y10-WR
YAGI ANTENNA 10 dBd

ANT410Y10-WR at 410 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.1 dBd

0
330 30
-3

The Telewave ANT410Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT410Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back
adapter can be used. The clamp H-Plane
210 150

ratio. Solid aluminum elements with 180

set fits any vertical mast or tower Gain: 10.1 dBd

360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 400 415 430
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 405-420 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 45 x 17 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

268 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7031 Rev. 10/13
 415 - 450 MHz

ANT420Y10-WR
YAGI ANTENNA 10dBd
7
ANT420Y10-WR at 420 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
-90
E-Plane
Gain: 10.1 dBd

0
330 30
-3

300 60
The Telewave ANT420Y10-WR is against ice and other hazards with -10

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for 270 90

The ANT420Y10-WR includes a

point to point as well as point/
welded vertical plate and mast
multipoint applications. This 240 120
clamp set. A horizontal welded
antenna produces 10 dBd forward
plate is optional, or the ANTM400H 210 150
gain with an excellent front-to-back 180
adapter can be used. The clamp H-Plane
ratio. Solid aluminum elements with Gain: 10.1 dBd
set fits any vertical mast or tower
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 400 430 460
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 415-450 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 41 x 13 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 269
TWDS-7113 Rev. 10/13
 420 - 440 MHz

ANT430Y10-WR
YAGI ANTENNA 10 dBd

ANT430Y10-WR at 410 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.1 dBd

0
330 30
-3

The Telewave ANT430Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT430Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back
adapter can be used. The clamp H-Plane
210 150

ratio. Solid aluminum elements with 180

set fits any vertical mast or tower Gain: 10.1 dBd

360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 415 425 450
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 405-420 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 45 x 17 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

270 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7032 Rev. 10/13
 438 - 455 MHz

ANT440Y10-WR
YAGI ANTENNA 10 dBd
7
ANT440Y10-WR at 440 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.0 dBd

0
330 30
-3

The Telewave ANT440Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT440Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back
adapter can be used. The clamp H-Plane
210 150

ratio. Solid aluminum elements with 180

set fits any vertical mast or tower Gain: 10.0 dBd

360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 430 445 460
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 438-455 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 45 x 15 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 271
TWDS-7029 Rev. 10/13
 420 - 470 MHz

ANT450Y5-WR
YAGI ANTENNA 5 dBd

ANT450Y5-WR at 440 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.2 dBd

0
330 30
-3

The Telewave ANT450Y5-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT450Y5-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 5 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back 210 150
adapter can be used. The clamp H-Plane 180
ratio. Solid aluminum elements with
set fits any vertical mast or tower Gain: 5.2 dBd
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 420-470 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 24 x 14 in.
Power rating (typ) 500 watts Antenna weight 5 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 9 lb.
Front to back ratio (min) 18 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 64° / 116° Exposed area (flat plate equiv.) 0.12 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 4.8 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

272 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7006 Rev. 10/13
 450 - 470 MHz

ANT450Y7-WR
YAGI ANTENNA 7 dBd
7
ANT450Y7-WR at 460 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 7.2 dBd

0
330 30
-3

The Telewave ANT450Y7-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for 270 90

The ANT450Y7-WR includes a
point to point as well as point/
welded vertical plate and mast
multipoint applications. This antenna
clamp set. A horizontal welded 240 120

produces 7 dBd forward gain with

plate is optional, or the ANTM400H
an excellent front-to-back ratio. 210 150

adapter can be used. The clamp H-Plane 180

Solid aluminum elements with 360° Gain: 7.2 dBd

set fits any vertical mast or tower
welds provide exceptional strength
support from 1.5”-3.5” O.D.
and prevent intermodulation.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 450 460 470
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 450-470 MHz Elements 4
Gain (typ) 7 dBd Dimensions (L x H) 29 x 13 in.
Power rating (typ) 500 watts Antenna weight 5 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 9 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 54° / 80° Exposed area (flat plate equiv.) 0.33 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 13.4 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 273
TWDS-7007 Rev. 10/13
 450 - 470 MHz

ANT450Y10-WR
YAGI ANTENNA 10 dBd

ANT450Y10-WR at 460 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.2 dBd

0
330 30
-3

The Telewave ANT450Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for 270 90

The ANT450Y10-WR includes a
point to point as well as point/
welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120

antenna produces 10 dBd forward

plate is optional, or the ANTM400H
gain with an excellent front-to-back 210 150

adapter can be used. The clamp H-Plane 180

ratio. Solid aluminum elements with Gain: 10.2 dBd

set fits any vertical mast or tower
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 450-470 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 45 x 15 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

274 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7063 Rev. 10/13
 450 - 512 MHz

ANT475Y5-WR
YAGI ANTENNA 5 dBd
7

YAGIS
ANT475Y5-WR at 480 MHz
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.0 dBd

0
330 30
-3

The Telewave ANT475Y5-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for
The ANT475Y5-WR includes a 270 90
point to point as well as point/
welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded
antenna produces 5 dBd forward 240 120

plate is optional, or the ANTM400H

gain with an excellent front-to-back
adapter can be used. The clamp 210 150

ratio. Solid aluminum elements with H-Plane 180

set fits any vertical mast or tower Gain: 5.0 dBd

360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 450-512 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 17 x 13 in.
Power rating (typ) 500 watts Antenna weight 2 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 4 lb.
Front to back ratio (min) 18 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 64° / 116° Exposed area (flat plate equiv.) 0.17 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 6.9 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 275
TWDS-7121 Rev. 10/13
 470 - 500 MHz

ANT490Y10-WR
YAGI ANTENNA 10 dBd

ANT490Y10-WR at 490 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.1 dBd

0
330 30
-3

The Telewave ANT490Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT490Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back 210 150
adapter can be used. The clamp H-Plane 180
ratio. Solid aluminum elements with
set fits any vertical mast or tower Gain: 10.1 dBd
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown 465 487 510
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 470-500 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 42.5 x 13 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

276 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7111 Rev. 10/13
 485 - 512 MHz

ANT500Y10-WR
YAGI ANTENNA 10 dBd
7
ANT500Y10-WR at 500 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.1 dBd

0
330 30
-3

The Telewave ANT500Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT500Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM400H
gain with an excellent front-to-back 210 150
adapter can be used. The clamp H-Plane 180
ratio. Solid aluminum elements with
set fits any vertical mast or tower Gain: 10.1 dBd
360° welds prevent intermodulation
support from 1.5”-3.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown 480 500 520
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 485-512 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 45 x 14.5 in.
Power rating (typ) 500 watts Antenna weight 8 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 150 / 125 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.42 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 17.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 277
TWDS-7112 Rev. 10/13
 698 - 787 MHz

ANT740Y8-WR
YAGI ANTENNA 8 dBd

ANT740Y8-WR at 740 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 8 dBd

0
330 30
-3

The Telewave ANT740Y8-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for 270 90

The ANT740Y8-WR includes a
point to point as well as point/
welded vertical plate and mast
multipoint applications. This 240 120
clamp set. A horizontal welded
antenna produces 8 dBd forward
plate is optional, or the ANTM940H
gain with an excellent front-to-back 210 150

adapter can be used. The clamp H-Plane 180

ratio. Solid aluminum elements with

set fits any vertical mast or tower Gain: 8 dBd
360° welds prevent intermodulation
support from 1.0”-2.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown 695 742 790
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 698-787 MHz Elements 6
Gain (typ) 8 dBd Dimensions (L x H) 27.5 x 8 in.
Power rating (typ) 500 watts Antenna weight 3 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 6 lb.
Front to back ratio (min) 18 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 54° / 64° Exposed area (flat plate equiv.) 0.3 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 8.5 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

278 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7115 Rev. 10/13
 734 - 806 MHz

ANT750Y5-WR
YAGI ANTENNA 5 dBd
7
ANT750Y5-WR at 770 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 5.2 dBd

5.22 dBd

The Telewave ANT750Y5-WR is against ice and other hazards with

a high performance directional a tough, RF-transparent radome.
antenna, designed especially for
The ANT750Y5-WR includes a
point to point as well as point/
welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded
antenna produces 5 dBd forward
plate is optional, or the ANTM940H
gain with an excellent front-to-back
adapter can be used. The clamp H-Plane
ratio. Solid aluminum elements with Gain: 5.2 dBd
set fits any vertical mast or tower
360° welds prevent intermodulation
support from 1.0”-2.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 734-806 MHz Elements 3
Gain (typ) 5 dBd Dimensions (L x H) 13 x 8 in.
Power rating (typ) 500 watts Antenna weight 2 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 5 lb.
Front to back ratio (min) 18 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 64° / 116° Exposed area (flat plate equiv.) 0.11 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 4.5 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 279
TWDS-7096 Rev. 10/13
 800 - 870 MHz

ANT830Y10-WR
YAGI ANTENNA 10 dBd

ANT830Y10-WR at 837 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.2 dBd

0
330 30
-3

The Telewave ANT830Y10-WR is a against ice and other hazards with 300 -10 60

high performance direc tional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT830Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM940H
gain with an excellent front-to-back 210 150
adapter can be used. The clamp set H-Plane 180
ratio. Solid aluminum elements with
fits any vertical mast or tower Gain: 10.2 dBd
360° welds prevent intermodulation
support from 1.0”-2.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter,
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 800-870 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 27 x 7.5 in.
Power rating (typ) 500 watts Antenna weight 3 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 6 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 49° / 47° Exposed area (flat plate equiv.) 0.25 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 7.25 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

280 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7003 Rev. 10/13
 824 - 896 MHz

ANT850Y10-WR
YAGI ANTENNA 10 dBd
7
ANT850Y10-WR at 877 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.2 dBd

0
330 30
-3

The Telewave ANT850Y10-WR is against ice and other hazards with 300 -10 60

a high performance directional a tough, RF-transparent radome. -20

antenna, designed especially for

The ANT850Y10-WR includes a 270 90

point to point as well as point/

welded vertical plate and mast
multipoint applications. This
clamp set. A horizontal welded 240 120
antenna produces 10 dBd forward
plate is optional, or the ANTM940H
gain with an excellent front-to-back 210 150
adapter can be used. The clamp set H-Plane 180
ratio. Solid aluminum elements with
fits any vertical mast or tower Gain: 10.2 dBd
360° welds prevent intermodulation
support from 1.0”-2.5” O.D.
and provide exceptional strength.
For installations on angled supports,
Eac h antenna is completely
the Universal mount option deletes
protec ted with our high-tech
the welded clamp, providing 3
Txylan™ coating, which provides
separate planes of rotation and
icing resistance and protection
almost any required orientation.
from corrosive gases, UV radiation,
The “U” mount attaches to virtually
salt spray, acid rain and wind-blown
all supports up to 3.5” in diameter, 824 861 896
sand. The feed line is protected
and can be adapted to flat surfaces
within the boom, and the radiating
and utility poles.
element is completely sealed
SPECIFICATIONS
Frequency (continuous) 824-896 MHz Elements 7
Gain (typ) 10 dBd Dimensions (L x H) 23 x 11 in.
Power rating (typ) 500 watts Antenna weight 3 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 7 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 46° / 50° Exposed area (flat plate equiv.) 0.22 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 8.7 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 281
TWDS-7061 Rev. 10/13
 885 - 975 MHz

ANT930Y10-WR
YAGI ANTENNA 10.5 dBd / 12.6 dBi

ANT930Y10-WR at 930 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
H-Plane -90

Gain: 10.5 dBd

The Telewave ANT930Y10-WR Yagi radiating element is completely 330

0
30

is a high performance directional sealed against ice and other hazards -3

antenna, designed especially for with a tough, RF-transparent 300 -10 60

point to point as well as point/ radome. -20

multipoint control applications. 270 90

The ANT930Y10-WR includes a
Seven elements provide a minimum
welded vertical plate and mast clamp
of 10.5 dBd (12.6 dBi) forward gain,
set. A horizontal welded plate is 240 120

excellent front-to-back performance,

optional, or the ANTM940H adapter
and coverage of the entire 900 MHz 210 150
can be used. The clamp set fits any E-Plane 180
commercial band. The boom and Gain: 10.5 dBd
vertical mast or tower support from
elements are solid 360° welded
1.0”-2.5” O.D.
aluminum to prevent intermodulation
and provide exceptional strength. For installations on angled supports,
the Universal mount option deletes
Each antenna is completely protected
the welded clamp, providing 3
with our high-tech Txylan™ coating,
separate planes of rotation and
which provides icing resistance and
almost any required orientation. The
protection from corrosive gases, UV
“U” mount attaches to virtually all
radiation, salt spray, acid rain and
supports up to 3.5” in diameter, and
wind-blown sand. The feed line is
can be adapted to flat surfaces and
protected within the boom, and the
utility poles.
SPECIFICATIONS
Frequency (continuous) 885-975 MHz Elements 7
Gain (typ) 10.5 dBd Dimensions (L x H) 28.5 x 7.5 in.
Power rating (typ) 500 watts Antenna weight 3 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 8 lb.
Front to back ratio (min) 25 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 40° / 50° Exposed area (flat plate equiv.) 0.25 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 10.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

282 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7016 Rev. 10/13
 880 - 960 MHz

ANT930Y12-WR
YAGI ANTENNA 12.2 dBd / 14.3 dBi
7
ANT930Y12-WR at 930 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.2 dBd

0
The Telewave ANT930Y12-WR Yagi The active element and feed line 330 30
-3
antenna is a high performance are sealed within the antenna.
300 60
directional antenna, with reduced -10

The ANT930Y12-WR includes a

sidelobes and very high front-to- -20

welded vertical plate and mast

back ratio. Twelve elements provide 270 90

clamp set. A horizontal welded

a minimum of 12.2 dBd (14.3 dBi)
plate is optional, or the ANTM400H
forward gain, and coverage of the 240 120
adapter can be used. The clamp
entire 900 MHz commercial band.
set fits any vertical mast or tower 210 150
The boom and elements are solid H-Plane 180
support from 1.5”-3.5” O.D. For
360° welded aluminum to prevent Gain: 12.2 dBd
hardline cable a 90°-angle feed
intermodulation and provide
option is available.
exceptional strength.
For installations on angled supports, TYPICAL VSWR RESPONSE
All antenna component s are
the Universal mount option deletes
completely protected with our 1.5:1
the welded clamp, providing 3 1.4:1
high-tech Txylan™ coating, which
separate planes of rotation and 1.3:1
seals the antenna against corrosive
almost any required orientation. 1.2:1
gases, UV radiation, salt spray,
The “U” mount attaches to virtually 1.1:1
acid rain, and wind-blown sand in
all supports up to 3.5” in diameter, 900 930 960

desert environments. This coating FREQUENCY (MHz)

and can be adapted to flat surfaces
also greatly reduces ice buildup.
and utility poles.
SPECIFICATIONS
Frequency (continuous) 880-960 MHz Elements 12
Gain (typ) 12.2 dBd Dimensions (L x H) 44 x 6 in.
Power rating (typ) 500 watts Antenna weight 6 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 11 lb.
Front to back ratio (min) 26 dB Wind rating / with 0.5” ice 175 / 150 MPH
Beamwidth V / H 34° / 36° Exposed area (flat plate equiv.) 0.58 ft.²
Pattern / Polarization Directional / Vertical Lateral thrust at 100 MPH 23.2 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 283
TWDS-7004 Rev. 10/13
 1425 - 1535 MHz

ANT1470Y12-WR
YAGI ANTENNA 12.2 dBd / 14.3 dBi

ANT1470Y12-WR at 1470 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60

E-Plane -90

Gain: 12.2 dBd

0
330 30
-3

300 60
The Telewave ANT1470Y12-WR is a UV radiation, salt spray, acid rain -10

rugged, wideband, high gain Yagi and wind-blown sand. The feed line -20

antenna, designed for handheld is sealed within the antenna boom, 270 90

use with many types of portable and an RF-transparent radome

wireless analyzers. This antenna protects the driven element from 240 120

can also be installed for fixed use corrosion or icing.

210 150
in any environment. The antenna H-Plane 180
The ANT1470Y12-WR includes a
uses twelve solid brass elements, Gain: 12.2 dBd
small U-clamp and plates that allow
and produces 12.2 dBd forward
the antenna to be mounted for
gain with excellent front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.
the antenna against corrosive gases,

SPECIFICATIONS
Frequency (continuous) 1425-1535 MHz Elements 12
Gain (typ) 12.2 dBd Dimensions (L x H) 26 x 5 in.
Power rating (typ) 500 watts Antenna weight 2 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 7 lb.
Front to back ratio (min) 17 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 34° / 35° Exposed area (flat plate equiv.) 0.18 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 7.4 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

284 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7023 Rev. 10/13
 1710 - 1880 MHz

ANT1800Y10-WR
YAGI ANTENNA 10.2 dBd / 12.3 dBi
7
ANT1800Y10-WR at 1795 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 10.2 dBd

0
330 30
-3

300 -10 60

The Telewave ANT1800Y10-WR the antenna against corrosive gases,

-20
is a rugged, wideband, high gain UV radiation, salt spray, acid rain
270 90
Yagi antenna for the DCS-1800 and wind-blown sand. The feed line
band, designed for handheld is sealed within the antenna boom,
use with many types of portable and an RF-transparent radome 240 120

wireless analyzers. This antenna protects the driven element from 210 150

can also be installed for fixed use corrosion or icing. H-Plane 180

in any environment. The antenna Gain: 10.2 dBd

The ANT1800Y10-WR includes a
uses eight solid brass elements,
small U-clamp and plates that allow
and produces 10 dBd forward
the antenna to be mounted for
gain with excellent front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 1710-1880 MHz Elements 8
Gain (typ) 10.2 dBd Dimensions (L x H) 19 x 3 in.
Power rating (typ) 500 watts Antenna weight 3 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 5 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 165 / 150 MPH
Beamwidth V / H 40° / 50° Exposed area (flat plate equiv.) 0.14 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 5.6 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 285
TWDS-7014 Rev. 10/13
 1850 - 1990 MHz

ANT1920Y9-WR
YAGI ANTENNA 9.3 dBd / 11.4 dBi

ANT1920Y9-WR at 1920 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 9.3 dBd

0
330 30
-3

300 -10 60

The Telewave ANT1920Y9-WR is the antenna against corrosive gases, -20

a rugged, wideband, high gain UV radiation, salt spray, acid rain 270 90

Yagi antenna for the broadband and wind-blown sand. The feed line
PCS bands, designed for handheld is sealed within the antenna boom,
240 120
use with many types of portable and an RF-transparent radome
wireless analyzers. This antenna protects the driven element from 210 150

can also be installed for fixed use corrosion or icing. H-Plane 180

Gain: 9.3 dBd

in any environment. The antenna
The ANT1920Y9-WR includes a
uses six solid brass elements,
small U-clamp and plates that allow
and produces 9.3 dBd forward
the antenna to be mounted for
gain with excellent front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached
design are optimized to prevent
to any vertical mast or tower
RF intermodulation, and ensure
support between 0.5-1.125” O.D.
precise pattern control.
The Universal mount option allows
Eac h antenna is completely mounting to angled supports up 1850 1920 1990

protected with Telewave’s high- to 3.5” O.D., and continuous tilt

tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 1850-1990 MHz Elements 6
Gain (typ) 9.3 dBd Dimensions (L x H) 11.75 x 3.5 in.
Power rating (typ) 500 watts Antenna weight 1 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 4 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 46° / 56° Exposed area (flat plate equiv.) 0.14 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 5.6 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

286 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7027 Rev. 10/13
 1850 - 1990 MHz

ANT1920Y12-WR
YAGI ANTENNA 12.2 dBd / 14.3 dBi
7
ANT1920Y12-WR at 1895 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.0 dBd

0
330 30
-3

300 -10 60
The Telewave ANT1920Y12-WR the antenna against corrosive gases,
-20
is a rugged, wideband, high gain UV radiation, salt spray, acid rain
270 90
Yagi antenna for the broadband and wind-blown sand. The feed line
PCS bands, designed for handheld is sealed within the antenna boom,
use with many types of portable and an RF-transparent radome 240 120

wireless analyzers. This antenna protects the driven element from

210 150
can also be installed for fixed use corrosion or icing. H-Plane 180

in any environment. The antenna Gain: 12.0 dBd

The ANT1920Y12-WR includes a
uses twelve solid brass elements,
small U-clamp and plates that allow
and produces 12.2 dBd forward
the antenna to be mounted for
gain with excellent front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 1850-1990 MHz Elements 12
Gain (typ) 12.2 dBd Dimensions (L x H) 23 x 3.25 in.
Power rating (typ) 500 watts Antenna weight 2 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 6 lb.
Front to back ratio (min) 22 dB Wind rating / with 0.5” ice 200 / 165 MPH
Beamwidth V / H 30° / 35° Exposed area (flat plate equiv.) 0.2 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 8.0 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 287
TWDS-7015 Rev. 10/13
 1920 - 2170 MHz

ANT2045Y12-WR
YAGI ANTENNA 12.2 dBd / 14.3 dBi

ANT2045Y12-WR at 2045 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.2 dBd

0
330 30
-3

300 -10 60
The Telewave ANT2045Y12-WR the antenna against corrosive gases,
-20
is a rugged, wideband, high gain UV radiation, salt spray, acid rain
270 90
Yagi antenna for the 3G UMTS/ and wind-blown sand. The feed line
PCS bands, designed for handheld is sealed within the antenna boom,
use with many types of portable and an RF-transparent radome 240 120

wireless analyzers. This antenna protects the driven element from

210 150
can also be installed for fixed use corrosion or icing. H-Plane 180

in any environment. The antenna Gain: 12.2 dBd

The ANT2045Y12-WR includes a
uses thirteen solid brass elements,
small U-clamp and plates that allow
and produces 12.2 dBd forward
the antenna to be mounted for
gain with exceptional front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 1920-2170 MHz Elements 13
Gain (typ) 12.2 dBd Dimensions (L x H) 24 x 3.75 in.
Power rating (typ) 500 watts Antenna weight 1.6 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 6 lb.
Front to back ratio (min) 30 dB Wind rating / with 0.5” ice 175 / 150 MPH
Beamwidth V / H 30° / 35° Exposed area (flat plate equiv.) 0.12 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 4.6 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

288 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7088 Rev. 10/13
 2300 - 2500 MHz

ANT2350Y12-WR
YAGI ANTENNA 12 dBd / 14.1 dBi
7
ANT2350Y12-WR at 2400 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.0 dBd

0
330 30
-3

The Telewave ANT2350Y12-WR is a the antenna against corrosive gases, 300 -10 60

rugged, wideband, high gain Yagi UV radiation, salt spray, acid rain -20

antenna for the WiFi and amateur 13 and wind-blown sand. The feed line 270 90

cm bands, designed for handheld is sealed within the antenna boom,

use with many types of portable and an RF-transparent radome
240 120
wireless analyzers. This antenna protects the driven element from
can also be installed for fixed use corrosion or icing. 210 150
H-Plane 180
in any environment. The antenna
The ANT2350Y12-WR includes a Gain: 12.0 dBd
uses 12 solid brass elements, and
small U-clamp and plates that allow
produces 12 dBd forward gain
the antenna to be mounted for
with exceptional front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 2300-2500 MHz Elements 12
Gain (typ) 12 dBd Dimensions (L x H) 18.5 x 3.25 in.
Power rating (typ) 500 watts Antenna weight 1.5 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 4 lb.
Front to back ratio (min) 19 dB Wind rating / with 0.5” ice 175 / 150 MPH
Beamwidth V / H 36° / 38° Exposed area (flat plate equiv.) 0.1 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 4.1 lb.
Termination N Female or 7-16 DIN (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 289
TWDS-7123 Rev. 10/13
 2400 - 2500 MHz

ANT2400Y12-WR
YAGI ANTENNA 12 dBd / 14.1 dBi

ANT2400Y12-WR at 2450 MHz

90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.0 dBd

0
330 30
-3

The Telewave ANT2400Y12-WR is a the antenna against corrosive gases, 300 -10 60

rugged, wideband, high gain Yagi UV radiation, salt spray, acid rain -20

antenna for the WiFi and amateur 13 and wind-blown sand. The feed line 270 90

cm bands, designed for handheld is sealed within the antenna boom,

use with many types of portable and an RF-transparent radome 240 120

wireless analyzers. This antenna protects the driven element from

can also be installed for fixed use corrosion or icing. H-Plane
210
180
150

in any environment. The antenna Gain: 12.0 dBd

The ANT2400Y12-WR includes a
uses ten solid brass elements, and
small U-clamp and plates that allow
produces 12 dBd forward gain
the antenna to be mounted for
with exceptional front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 2400-2500 MHz Elements 10
Gain (typ) 12 dBd Dimensions (L x H) 17.75 x 3.5 in.
Power rating (typ) 500 watts Antenna weight 1.25 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 6 lb.
Front to back ratio (min) 30 dB Wind rating / with 0.5” ice 165 / 150 MPH
Beamwidth V / H 34° / 35° Exposed area (flat plate equiv.) 0.09 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 3.6 lb.
Termination N Female or 7-16 DIN-F (opt) (40 psf - flat plate equiv.)

All specifications subject

290 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7008 Rev. 10/13
 2500 - 2700 MHz

ANT2600Y12-WR
YAGI ANTENNA 12 dBd / 14.1 dBi
7
ANT2600Y12-WR at 2600 MHz

YAGIS
90
60 60
-3

30 -10 30

-20

0 0

-30 -30

-60 -60
E-Plane -90

Gain: 12.0 dBd

0
330 30
-3

The Telewave ANT2600Y12-WR the antenna against corrosive gases, 300 -10 60

is a rugged, wideband, high gain UV radiation, salt spray, acid rain -20

Yagi antenna for the WiMAX/LTE and wind-blown sand. The feed line 270 90

bands, designed for for handheld is sealed within the antenna boom,
use with many types of portable and an RF-transparent radome 240 120

wireless analyzers. This antenna protects the driven element from

can also be installed for fixed use corrosion or icing. H-Plane
210
180
150

in any environment. The antenna Gain: 12.0 dBd

The ANT2600Y12-WR includes a
uses 12 solid brass elements,
small U-clamp and plates that allow
and produces 12 dBd forward
the antenna to be mounted for
gain with excellent front-to-back
vertical or horizontal polarization.
performance. Construction and
The clamp set can be attached to
design are optimized to prevent
any vertical mast or tower support
RF intermodulation, and ensure
between 0.5”-1.125” O.D. The
precise pattern control.
Universal mount option allows
Eac h antenna is completely mounting to angled supports up
protected with Telewave’s high- to 3.5” O.D., and continuous tilt
tech Txylan™ coating, which seals adjustment.

SPECIFICATIONS
Frequency (continuous) 2500-2700 MHz Elements 12
Gain (typ) 12 dBd Dimensions (L x H) 17.25 x 3 in.
Power rating (typ) 500 watts Antenna weight 1.0 lb.
Impedance / VSWR 50 ohms / 1.5:1 (max) Shipping weight 3 lb.
Front to back ratio (min) 20 dB Wind rating / with 0.5” ice 175 / 150 MPH
Beamwidth V / H 36° / 40° Exposed area (flat plate equiv.) 0.08 ft.²
Pattern / Polarization Directional / Variable Lateral thrust at 100 MPH 3.2 lb.
Termination N Female or 7-16 DIN-F (opt) (40 psf - flat plate equiv.)

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 291
TWDS-7062 Rev. 10/13
 138 - 960 MHz

INSTALLATION GUIDE
FOR YAGI ANTENNAS

WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let
go and stay away. Call the utility company for assistance. Always use safety devices for
tower climbing. Ensure that the tower structure is well grounded for lightning protection.

BEFORE ASSEMBLING AND MOUNTING:

Carefully read all instructions and study the diagrams.
Check to make sure you have all parts.
PARTS LIST (Fig. 1) Figure 1
MAST
(1) Antenna assy.
(1) Mounting plate
(2) ANTI- (4) 5/16" BOLT
(4) 5/16-18 x 4.0” threaded rod ROTATION

(2) 5/16-18 x 1.0” bolt

(10) 5/16” Hex nuts
(8) 5/16” Lock washers
(1) Anti-seize compound

MOUNTING INSTRUCTIONS
1. Apply anti-seize compund to all rod ends.
Attach mounting and antenna boom plates
to the mast with (4) 5/16” rods per Fig. 1. The
mounting and boom plates are grooved to
provide self alignment for vertical orientation.
The driven element radome should be pointing MAST
down. Figure 2
2. Tighten the hex nuts until all lock washers REFLECTOR
are flat, then add 1/2 turn to each. Tighten ANT. BOOM
ELEMENT

the anti-rotation bolts and jam nuts to resist

turning forces on the antenna.
3. The antenna input connector is a Type N or RF CONNECTOR

7-16 DIN Female. Connect the RF feed cable

to the antenna output connector. Secure all ANTI-
ROTATION
cables with cable ties. Fig. 2 illustrates a typical
MOUNTING
method for connecting the RF cable, with a PLATE

feed cable service loop.

4. Be sure to properly seal the input connector DRIVEN
ELEMENT
with waterproof tape or other sealing material. CABLE CABLE TIE
TO RADIO
See Telewave TWDS-0502 for a recommended
method of connector sealing. Note: Driven element with radome should be
pointing down for vertical polarization.

All specifications subject

292 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7081 Rev. 4/11
 1.0 - 2.7 GHz

INSTALLATION GUIDE
FOR YAGI ANTENNAS
7

YAGIS
WARNING:
For your safety, do not install any antenna near power lines, and carefully follow all installation
instructions. If the antenna falls toward or contacts any overhead wires, immediately let
go and stay away. Call the utility company for assistance. Always use safety devices for
tower climbing. Ensure that the tower structure is well grounded for lightning protection.

BEFORE ASSEMBLING AND MOUNTING:

Carefully read all instructions and study the diagrams.
Check to make sure you have all parts.
Figure 1
PARTS LIST (Figure 1)
(1) Antenna assy.
(2) Mounting plates
(1) 5/16-18 U-bolt
(2) 5/16” Hex nuts
(2) 5/16”Lock washers
(1) Anti-seize compound

MOUNTING INSTRUCTIONS
1. Apply anti-seize compund to U-bolt ends.
Loosely attach mounting plate with 2 grooves
and antenna clamp plate to the mast with
U-bolt per Fig. 1. Slide the antenna boom end
into the groove in the mounting plates, and
rotate the antenna elements according to the MAST
requirements of the application. The driven Figure 2
element radome should be pointing down for
vertical operation. REFLECTOR
ANT. BOOM ELEMENT

2. Tighten the hex nuts until the lock washers are

flat, then add 1/2 turn.
RF CONNECTOR
3. The antenna input connector is a Type N or
7-16 DIN Female. Connect the RF feed cable
to the antenna input connector. Secure all
cables with cable ties. Fig. 2 illustrates a typical
MOUNTING
method for connecting the RF cable, with a PLATE
feed cable service loop.
4. Be sure to properly seal the input connector DRIVEN
ELEMENT
with waterproof tape or other sealing material. CABLE CABLE TIE
TO RADIO
See Telewave TWDS-0502 for a recommended
method of connector sealing. Note: Driven element with radome should be
pointing down for vertical polarization.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 293
TWDS-7082 Rev. 10/13
 30 - 3000 MHz

WIDEBAND ANTENNAS

Telewave Wideband Directional antennas offer a simple, rugged

package for RF testing, troubleshooting and coverage analysis.

Telewave Wideband Discone antennas combine proven designs and

ultra-rugged construction to withstand the most extreme conditions.
Broad beamwidth enables communication over hundreds of miles
from mountain-top sites to aircraft, with frequency coverage as
wide as 30-3000 MHz in one antenna.

Telewave Discone antennas are fabricated from solid 6061-T6

aluminum, and completely welded for maximum strength and
electrical performance. Each antenna is fully coated with our high-
tech Txylan™ coating, which provides total protection from water,
corrosive chemicals, salt spray, and windblown abrasives.

This smooth black coating also dramatically reduces surface friction,

reducing and often preventing ice adhesion, while improving
absorption of solar radiation. The ANT260KT is also available with
Desert Tan coating, offering all the same benefits and clean visual
integration in a desert environment.

The ANT280S is light enough to be used as a tactical antenna

for field deployment, and can complement or replace multiple
antennas on a mobile command vehicle. The 500 watt power
rating allows use of high-power radios and tactical repeaters.
The standard connector type is N Female, and a 7-16 DIN-F can
be installed as an option for higher power applications.

All specifications subject

294 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7124 Rev. 10/13
 30 MHz - 3 GHz

ANT220K
WIDEBAND DISCONE ANTENNA
7
The Telewave ANT220K is an The radome and TxylanTM coating

WIDEBAND
extremely rugged, wideband on all metal surfaces ensures
discone antenna for all frequencies complete protection from corrosive
between 30 MHz and 3 GHz. gases, ultraviolet radiation, salt
The wide vertical beamwidth of spray, acid rain and sand storms
discone antennas allows clear in desert environments.
communication for ground and
ground-to-air applications. The ANT220K is designed to be
clamped to a 1.5”-3.5” diameter
Telewave discone antennas are galvanized steel support pipe.
designed to survive the most An ANTC482 dual clamp set is
e x t re m e c o n d i t i o n s , w h e re included.
conventional antennas often
fail. They are field-proven in US
and overseas deployments and
support many voice and data
requirements in multiple bands.

Each discone is con struct ed

from Mil. Spec. 6061-T6 solid
aluminum, fully weld ed at all
joints for maximum strength. All
internal junctions are enclosed
within a ruggedized radome to ANTC482
ensure survivability in the worst
environments.
90

SPECIFICATIONS (PRELIMINARY) 60

-3
60

Frequency (continuous) 30 MHz - 3000 MHz 30 -10 30

Power rating (typ.) 500 watts -20

Gain (typ.) 0 dBd 0 0

Impedance 50 ohms -30 -30

VSWR 2.5:1 or less

-60 -60

Pattern Omnidirectional E-plane: 100 MHz

-90

Termination N-Male or 7-16 DIN on RG-393 feed

cable
Vertical beamwidth (nom.) 110 degrees (varies with frequency) 60
90

60

Wind rating / 0.5” ice 150 / 125 MPH -3

30 30

Maximum exposed area 2.25 ft.²

-10

-20

Lateral thrust at 100 MPH 90 lb 0 0

Bending moment at 100 MPH 180 ft. lb (top clamp, flat plate equiv.)
Dimensions 58” H x 38” W (at skirt base) -30 -30

Weight (antenna + clamps) 61 lb -60 -60

E-plane: 400 MHz

-90

Shipping weight 110 lb

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 295
TWDS-7125 Rev. 10/13
 75 MHz - 3 GHz

ANT260K, KT
WIDEBAND DISCONE ANTENNA

The Telewave ANT260K is an The radome and TxylanTM coating

extremely rugged, wideband on all metal surfaces ensures
discone antenna for all frequencies complete protection from corrosive
between 75 MHz and 3 GHz. gases, ultraviolet radiation, salt
The wide vertical beamwidth of spray, acid rain and sand storms
discone antennas allows clear in desert environments.
communication for ground and
ground-to-air applications. The ANT260K is designed to
be clamped to a 1.5”-3.5” O.D.
Telewave discone antennas are galvanized steel support pipe.
designed to survive the most An ANTC482 dual clamp set is
e x t re m e c o n d i t i o n s , w h e re included. The ANT260KT is coated
conventional antennas often in Desert Tan for deployment in
fail. They are field-proven in US desert environments.
and overseas deployments and
support many voice and data
requirements in multiple bands.

Each discone is con struct ed 3.0

from Mil. Spec. 6061-T6 solid

aluminum, fully weld ed at all 2.5

joints for maximum strength. All V

S
W
internal junctions are enclosed R

within a ruggedized radome to ANTC482 2.0

ensure survivability in the worst

environments. 1.5

1.25

SPECIFICATIONS
50 100 200 300 400 500

Frequency (continuous) 75 MHz - 3 GHz (75-95 MHz at 2:1 VSWR) FREQUENCY (MHZ)

Power rating (typ.) 500 watts 60

90

60

Gain (typ.) 0 dBd -3

30 -10 30

Impedance 50 ohms -20

VSWR 1.5:1 or less in band 0 0

Pattern Omnidirectional
Termination N-Male or 7-16 DIN on RG-393 feed -30 -30

cable
-60 -60

Vertical beamwidth (nom.) 110 degrees E-plane: 100 MHz

-90

90

Wind rating / 0.5” ice 200 / 150 MPH 60

-3
60

Maximum exposed area 1.67 ft.² 30 -10 30

Lateral thrust at 100 MPH 66 lb -20

Bending moment at 100 MPH 133 ft. lb (top clamp, flat plate equiv.)
0 0

Dimensions 53” H x 26” W (at base) -30 -30

Weight (antenna + clamps) 52 lb

-60 -60

Shipping weight 102 lb E-plane: 400 MHz

-90

All specifications subject

296 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7090 Rev. 10/13
 118 MHz - 3 GHz

ANT280S
WIDEBAND DISCONE ANTENNA
7
The Telewave ANT280S Discone is The ANT280S is light enough

WIDEBAND
a rugged, lightweight, wideband to be used as a tactical antenna
antenna for all frequencies for field deployment, and can
between 118 MHz and 3 GHz. This complement or replace multiple
versatile antenna provides a highly antennas on a mobile command
flexible solution to interoperability vehicle. The 500 watt power rating
requirements in multiple bands. allows use of high-power radios
and tactical repeaters.
Each antenna is constructed from
Mil. Spec. 6061-T6 solid aluminum, The full-surface coating and
welded at all joints for maximum rugged construction means it can
strength. A high-strength radome also be permanently mounted on
encloses the upper cone and RF a tower or command center roof
connections to ensure survivability for long-term fixed operation.
in adverse environments.
The ANT280S is ready to operate
The radome and TxylanTM coating with a single or multiband radio
on all metal surfaces ensures using one antenna output.
complete protection from corrosive Several types of low-loss couplers
gases, ultraviolet radiation, salt are available for multi-radio
spray, acid rain and sand storms operation.
in desert environments. TYPICAL VSWR RESPONSE
For optimum performance in the -14 / 1.5:1

-16 / 1.4:1
The antenna has a 1.5” diameter lowest frequency ranges, the -18 / 1.3:1

mast and a dual clamp kit is antenna should be mounted at -20 / 1.22:1

available for mounting to a 1.5”- least 20 feet above the closest -22 / 1.17:1

3.5” O.D. support pipe. reflecting surface. -24 / 1.13:1

-26 / 1.11:1
dB / VSWR
SPECIFICATIONS 130 400 700 1000 1300 1600 1900 2200 2500 2800 3000

FREQUENCY (MHz)
Frequency (continuous) 118 MHz - 3 GHz
90

Power rating (typ.) 500 watts 60 60

-3

Gain (typ.) 0 dBd 30 -10 30

Impedance 50 ohms -20

VSWR 1.5:1 or less 0 0

(118 - 136 MHz at 1.8:1 VSWR)

Pattern Omnidirectional -30 -30

Termination N-Male or 7-16 DIN (option) -60 -60

on feed cable E-plane: 136 MHz

-90

90

Vertical beamwidth (nom.) 110° 60

-3
60

Wind rating / 0.5” ice 150 / 100 MPH 30 -10 30

Maximum exposed area 0.89 ft.² -20

Lateral thrust at 100 MPH 36 lb

0 0

Bending moment at 100 MPH 49 ft. lb (top clamp, flat plate equiv.) -30 -30

Dimensions 43” H x 28.5” W (at base)

-60 -60

Weight 11 lb E-plane: 400 MHz

-90

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 297
TWDS-7108 Rev. 10/13
 400 MHz - 3 GHz

ANT400K, KS
WIDEBAND DISCONE ANTENNA

The Telewave ANT400K is an The radome and TxylanTM coating

extremely rugged, wideband on all metal surfaces ensures
discone antenna for all frequencies complete protection from corrosive
between 400 MHz and 3 GHz. gases, ultraviolet radiation, salt
The wide vertical beamwidth of spray, acid rain and sand storms
discone antennas allows clear in desert environments.
communication for ground, sea,
The ANT400K is designed to be
and ground-to-air applications.
clamped to a 1.5”-3.5” diameter
Telewave discone antennas are galvanized steel support pipe.
designed to survive the most An ANTC482 dual clamp set
e x t re m e c o n d i t i o n s , w h e re is included. The ANT400KS is
conventional antennas often fail. provided with a shortened support
They are field-proven in military mast for compact installations.
deployments and the offshore
oil and gas industry, and support
many voice and data requirements
in multiple bands.
Each discone is con struct ed
from Mil. Spec. 6061-T6 solid
aluminum, fully weld ed at all
joints for maximum strength. All
internal junctions are enclosed 3.0
within a ruggedized radome to
ensure survivability in the worst
environments. ANT400KS IN OFFSHORE 2.5
DEPLOYMENT
V
S
W
SPECIFICATIONS R

Frequency (continuous) 400 MHz - 3 GHz 2.0

Power rating (typ.) 500 watts

Gain (typ.) 0 dBd 1.5

Impedance 50 ohms
1.25
VSWR 1.5:1 or less in band
Pattern Omnidirectional 400 1700 3000

Termination N-Male or 7-16 DIN (option) FREQUENCY (MHZ)

on RG-393 feed cable

90

Vertical beamwidth (nom.) 110 degrees 60

-3
60

Wind rating / 0.5” ice 200 / 150 MPH 30 -10 30

Maximum exposed area 1.13 ft.² -20

Lateral thrust at 100 MPH 46 lb 0 0

Bending moment at 100 MPH 74 ft. lb (top clamp, flat plate equiv.)
-30 -30

Dimensions 48” H x 8” W (at base)

Weight (antenna + clamps) 32 lb
-60 -60

E-plane: 450 MHz

-90

Shipping weight 41 lb

All specifications subject

298 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7092 Rev. 10/13
 500 MHz - 3 GHz

ANT500WR
WIDEBAND DIRECTIONAL ANTENNA
7
90

WIDEBAND
60 60
-3

30 -10 30

-20

0 0

-30 -30

E Plane -60
-90
-60

550 MHz
0
H Plane 330 30
-3

300 -10 60

-20

270 90

240 120

210 150
180

90
60 60
-3

The Telewave ANT500WR is a lightweight, broadband directional 30 -10 30

antenna for interference location, in-building testing, and RF coverage -20

measurement. The antenna is enclosed in a rugged, weatherproof 0 0

housing, and includes a hand grip for accurate pointing and polarization.
A flexible 5 ft. N-male jumper is also included. -30 -30

-60 -60
E Plane -90

SPECIFICATIONS
2000 MHz
Frequency (continuous) 500 MHz - 3 GHz H Plane 330
0
30

Power rating (typ.) 500 watts -3

VSWR 2.5:1 or less 300 -10 60

Impedance 50 ohms -20

Pattern Directional 270 90

Termination N-Female
Gain (frequency dependent) 4-7 dBi 240 120

Enclosure dimensions (H x W x D) 10.5” x 13.5” x 1.25”

210 150
Weight 2.5 lb. 180

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 299
TWDS-7114 Rev. 10/13
 ANTENNA MOUNTING HARDWARE

ANTC482 ANTM432
The ANTC482 Mounting Clamp The ANTM432 is an insulated top support bracket for Telewave F6-
Kit is fabricated from heavy-duty 8-10 collinear antennas. It is field-adjustable from 32”-43” from the
galvanized steel, with stainless tower. The boom is fabricated from UV-resistant PVC, and will not
steel fasteners. The middle clamps disrupt the VSWR or pattern of the antenna. (1) ANTC484 clamp
are separate for more flexible and (2) steel band clamps are included with the kit.
installation. Designed for mounting
to square or round member towers
from 1.5”-3.5” O.D. Two complete
clamp sets are included in the kit.
This clamp set can also be used in a
90-degree crossover configuration.

ANTC483 / ANTC483SS ANTS420

The ANTC483 Mounting Clamp The ANTS420 Mast Shim Set allows
Kit is fabricated from heavy-duty mounting of Telewave folded dipoles
galvanized steel, with stainless steel to a 1.25 inch diameter mast or
fasteners. The 483SS model clamps tower leg. One shim set is required
are fabricated from stainless steel. for each dipole clamp.
The middle clamps are welded at
the center. Designed for mounting
to square or round member towers
from 1.5”-3.5” O.D. Two complete
clamp sets are included in the kit.

ANTM431 ANTM433
The ANTM431 is a top support bracket, designed to provide proper The ANTM433 Side Mount
top support for a mast only. It is constructed from heavy galvanized Kit is designed to mount an
steel. The bracket is adjustable from 13 to 21 inches from the tower. antenna 15 inches from a
The kit includes (1) ANTM431, (1) ANTC484 Mounting Clamp, and tower. It is fabricated from
(1) adjustable steel band clamp. heavy-duty galvanized steel.
(2) ANTC484 clamps are
included in the kit.

ANTC484 ANTM434
The ANTC484 mounting clamp The ANTM434 Adjustable
Tower
consists of a steel V-bolt assembly Side Mount Kit mounts
and associated hardware, across a tower face to
combined with a back plate of provide a standoff
heavy-duty galvanized steel. It will mounting configuration. (Mast not
supplied)
mount to 3-inch round members or The antenna can be
2-inch angled members. positioned 2 to 8 feet
from the tower. Mounting
hardware is galvanized
steel. Supplied without
ANTC485 support booms or mast.
Dual U Bolt clamp For use on tower legs from
set for F2 series 1.5”-3.5” O.D.
collinears. For mounting
to round member towers
ANTM434-M Support booms
Includes support booms.
from 1.5”-3” O.D.
2 inch Sch. 40 galvanized
steel.

All specifications subject

300 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7046 Rev. 10/13
ANTENNA CONNECTION WEATHERPROOFING 7
The primary purpose of wrapping a connection is to seal it against moisture intrusion. The procedure illustrated
here will give excellent results if done properly, and will last for years. The required materials are shown below:
vinyl tape, butyl tape, mastic, and Scotch-Kote.

After a connection has been made and tested to verify that it has been properly done, it needs to be sealed.
Begin by wrapping vinyl tape as shown to cover the connectors and a portion of both cables. Stretch the
tape a minor amount as it is wound onto the cable, the connectors and then onto the other cable. Wrap this
so that each new layer covers half of the previous wrap. Keep the wraps neat and as smooth as possible.

The second step is to wrap a second layer over the first layer, but wrap it in the other direction as shown.
These two layers will keep the connection clean and tight. The next step is to wrap a layer of vinyl tape with
the adhesive side out, as shown. Begin by folding the tape onto itself at a 45 degree angle. This provides a
sticky surface to help bond the the next layer of tape to the connection.

The next step is to wrap the entire connection with the butyl tape. This layer provides the majority of the
moisture shielding. The final step is to coat the entire butyl layer with Scotch-Kote. Coat a portion of each
cable and the entire final layer of tape.

This material works very quickly to fuse the last layer together and to the cable jacket. After the Scotch-Kote
has dried, encapsulate the finished connection with the mastic material.
It is best to secure the cable to the support on either side of the connection, not over the connection. One
tie on each side is best, and spaced so as to support the connection, but not to disrupt the surface of the
seal. This provides support, but will not compromise the seal you have just made. Added insurance against
abrasion may be achieved by placing a single layer of vinyl tape onto the support where the connection will
rest before tying the cable down. This provides some cushioning between the connection and the support.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 301
TWDS-0502 Rev. 2/10
 24 - 72 MHz

ANTPD 204, 206

LOW BAND RF POWER DIVIDERS

Telewave Low Band RF Power

Dividers divide up to 500 Watts of
power from a single source over 2
outputs. These dividers are available
in two overlapping frequency bands
from 24 MHz to 72 MHz, with very
low VSWR and insertion loss. Power
is divided equally to each output
port.
Telewave power dividers are
custom machined from solid 6061-
T6 aluminum stock. These devices
utilize solid metal conductors for
all internal RF paths, enabling high
power handling and extremely low
insertion loss. No coaxial cabling This poly-polar coating beads
of any kind is used internally, and water, and is chemically bonded
no tuning is required for full band to the metal surface of the device,
coverage. The standard connector reducing and often preventing ice
type is N Female, and 7-16 DIN can adhesion, and does not chip or
also be supplied as an option for flake.
higher power applications.
In situations where port-to-port
Telewave power dividers also isolation is not required, Telewave
feature our high-tech Txylan™ power dividers can also be used to
coating, which provides exceptional feed two receivers from a common
protection from water, corrosive antenna, with less than 0.25 dB
chemicals, salt spray, and windblown insertion loss.
abrasives.
ANTPD206

SPECIFICATIONS
Frequency range 204: 24-54 MHz
206: 45-72 MHz
Input power (typ) 500 watts
Impedance 50 ohm
VSWR 1.3:1 or less
Insertion loss (total to all ports) 0.15 dB or less
Power division (2 way) 50% ANTPD204
Connectors N Female or 7-16 DIN (opt.)
Dimensions (HWD) in. (cm) 204: 76 x 1 x 1 (193 x 2.5 x 2.5)
206: 51 x 1 x 1 (129.5 x 2.5 x 2.5)
Weight lb. (kg) 204: 9 (4.1)
206: 6 (2.7)

All specifications subject

302 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7099 Rev. 2/07
 24 - 2500 MHz

ANTPD SERIES
RF POWER DIVIDERS
7
Telewave RF Power Dividers divide

POWER DIVIDERS
FREQUENCY RANGES
up to 500 Watts of power from ANTPDx04 24-54 MHz
a single source over 2, 3, or 4 ANTPDx06 45-72 MHz
outputs. Dividers are available in ANTPDx08 65-110 MHz
overlapping frequency bands from
ANTPDx1 90-210 MHz
24 MHz to 2.5 GHz, with very low
ANTPDx2 180-250 MHz
VSWR and insertion loss. Power
ANTPDx3 250-450 MHz
is divided equally to each output ANTPD424
ANTPDx4 350-600 MHz
port.
ANTPDx7 675-850 MHz
Telewave power dividers are ANTPDx8 760-920 MHz
custom machined from solid 6061- ANTPDx9 900-1100 MHz
T6 aluminum stock. These devices ANTPDx14 1350-1600 MHz
utilize solid metal conductors for
ANTPDx18 1700-2050 MHz
all internal RF paths, enabling 500
ANTPDx24 2000-2500 MHz
watt continuous power handling
and extremely low insertion loss.
POWER DIVISION
No coaxial cabling of any kind is (equal output to each port)
used internally, and no tuning is
ANTPD2xx 2 - Way 50%
required for full band coverage.
ANTPD3xx 3 - Way 33.3%
The standard connector type is
N Female, and 7-16 DIN can also ANTPD4xx 4 - Way 25%
be supplied as an option for high ANTPD28D
power applications.
Telewave power dividers also
feature our high-tech Txylan™
coating, which provides exceptional
protection from water, corrosive
chemicals, salt spray, and windblown
abrasives. This poly-polar coating
beads water, and is chemically
bonded to the metal surface of
the device, and does not chip or
flake. The size and shape of these
dividers lends itself to many possible
mounting applications, including
panels, masts, or tower legs,
providing maximum installation
flexibility.
In situations where port-to-port
isolation is not required, Telewave
power dividers can also be used ANTPD34 ANTPD21
to feed several receivers from a
common antenna, with less than
0.25 dB insertion loss.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 303
TWDS-7001 Rev. 10/13
 24 - 2500 MHz

ANTPD SERIES
RF POWER DIVIDERS

SPECIFICATIONS
Frequency range 24-2500 MHz
Input power (typ) 500 Watts
Impedance 50 ohms
VSWR (max) 1.3:1
Connectors N Female or 7-16 DIN (opt.)
INSERTION LOSS (total - from input to all output ports)
ANTPDx04, x06, x08, x1 24-110 MHz 0.1 dB
ANTPDx2 180-250 MHz 0.15 dB
ANTPDx3 250-450 MHz 0.18 dB
ANTPDx4, x7, x8 350-920 MHz 0.2 dB
ANTPDx9, x14, x18, x24 900-2500 MHz 0.22 dB
N FEMALE 7-16 DIN
MODEL DIMENSIONS WEIGHT MODEL DIMENSIONS WEIGHT
ANTPDx04 76” L x 1.125” x 1.125” 9 lb. ANTPDx04D 76.25” L x 1.125” x 1.125” 11 lb.
ANTPDx06 51” L x 1.125” x 1.125” 6 lb. ANTPDx06D 51.25” L x 1.125” x 1.125” 7 lb.
ANTPDx08 38.5” L x 1.125” x 1.125” 5.5 lb. ANTPDx08D 38.75” L x 1.125” x 1.125” 6.5 lb.
ANTPDx1 21” L x 1.125” x 1.125” 4.5 lb. ANTPDx1D 21.25” L x 1.125” x 1.125” 5.5 lb.
ANTPDx2 15.5” L x 1.125” x 1.125” 3.5 lb. ANTPDx2D 15.75” L x 1.125” x 1.125” 4.5 lb.
ANTPDx3 11” L x 1.125” x 1.125” 3 lb. ANTPDx3D 11.25” L x 1.125” x 1.125” 4 lb.
ANTPDx4 8.5” L x 1.125” x 1.125” 2 lb. ANTPDx4D 8.75” L x 1.125” x 1.125” 3 lb.
ANTPDx7 5.5” L x 1.125” x 1.125” 1.5 lb. ANTPDx7D 5.75” L x 1.125” x 1.125” 2.5 lb.
ANTPDx8 5.25” L x 1.125” x 1.125” 1.5 lb. ANTPDx8D 6.0” L x 1.125” x 1.125” 2.5 lb.
ANTPDx9 5” L x 1.125” x 1.125” 1.5 lb. ANTPDx9D 5.25” L x 1.125” x 1.125” 2.5 lb.
ANTPDx14 3.5” L x 1.125” x 1.125” 1 lb. ANTPDx14D 3.75” L x 1.125” x 1.125” 2 lb.
ANTPDx18 3.25” L x 1.125” x 1.125” 1 lb. ANTPDx18D 3.5” L x 1.125” x 1.125” 2 lb.
ANTPDx24 3.0” L x 1.125” x 1.125” 1 lb. ANTPDx24D 3.25” L x 1.125” x 1.125” 2 lb.

All specifications subject

304 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-7001 Rev. 10/13
 132 - 960 MHz

TS-15xx, TS-22xx, TS-46/47xx SERIES

CROSSBAND COUPLERS
7
Telewave Crossband Couplers allow transmitters,

CROSSBAND COUPLERS
receivers, and antennas in the 150, 220, 450, and
700/800 MHz bands to share a common feedline.
A single coupler can be used to couple two radios
to a multiband antenna, or a multiband radio to two
antennas. Two couplers are used with two radios and
two antennas.
TS-4680-DIN
The ability to share a feedline between systems on
different bands simplifies installation, while reducing
cost and tower loading. No tuning is required for full
band coverage, and each unit is completely weather-
sealed for zero maintenance and long service.

MODEL FREQUENCY RANGE POWER

TS-1545 132-174 & 406-470 MHz 150 watts
TS-1546 132-174 & 450-512 MHz 150 watts
TS-1570 132-174 & 763-869 MHz 150 watts TS-1580
TS-1580 132-174 & 806-902 MHz 150 watts
TS-1590 132-174 & 850-960 MHz 150 watts
TS-2246 219-225 & 406-512 MHz 150 watts
TS-1545H 132-174 & 406-470 MHz 400 watts
ANT
TS-1546H 132-174 & 450-512 MHz 400 watts 851 MHz
ANT
TS-1570H 132-174 & 763-869 MHz 400 watts 156 MHz
TS-1580H 132-174 & 806-902 MHz 400 watts
TS-1590H 132-174 & 850-960 MHz 400 watts
TS-2246H 219-225 & 406-512 MHz 400 watts
TS-4670 440-470 & 763-869 MHz 400 watts
TS-4680 440-470 & 806-870 MHz 400 watts
TS-4690 440-470 & 896-932 MHz 400 watts
TS-4770 470-512 & 763-869 MHz 400 watts
TS-4780 470-512 & 896-932 MHz 400 watts
TS-154676 150-174 / 450-470 / 763-869 MHz 400 watts
TS-22XX,
COMMON SPECIFICATIONS TS-15XX TS-46/47XX
TX TX
Impedance / VSWR (typ/max) 50 ohms / 1.3:1 / 1.5:1 156 MHz 851 MHz
Isolation (min / typ.) 23 dB / 27 dB 25 dB / 30 dB
Insertion loss per pair (max) 0.2 dB
Temperature range -30°C to +60°C
Connectors N Male or Female, 7-16 DIN M/F (opt.)
Dimensions (HWL) in. 1.5 x 2.25 x 3.75 1 x 1.5 x 6.5
Weight lb. 0.5 1

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 305
TWDS-7110 Rev. 6/10
8 TECHNICAL NOTES
 8 TECHNICAL NOTES

TUNING INSTRUCTIONS

• Single / Dual Isolators

• Pass-Reject Cavity and Duplexer

• Pass Cavity

• VSWR / Return Loss

 SINGLE FERRITE ISOLATORS
TUNING INSTRUCTIONS

The following tuning instructions are provided for use when only a wattmeter is available. Tuning range with this
method is approximately +/- 1 MHz at VHF, +/- 2 MHz at UHF, and +/- 5 MHz at 800/900 MHz. Maximum tuning range
requires a more complex procedure and a network analyzer, and is also available from Telewave for a nominal fee.
The initial tuning should be done at the lowest power available to reduce the possibility of damage to the transmitter
or cavities during the tuning procedure. The transmitter must be turned off to prevent damage to the output stages
whenever connections are changed.
Install the isolator in its permanent mounting position if possible. Connect the cable from the transmitter directly
to the isolator port A (Fig. I). Remove the snap plugs from adjustment holes #1, and #2. Adjustment #3 is factory set
and should not be changed. Connect a terminating wattmeter, or a wattmeter with a load attached, to the output
port B. Using a non-metallic tool, tune adjustment #1 and #2 for a maximum reading.

Remove the wattmeter and the dummy load and connect the antenna or cavity to the isolator (Fig. 2). Remove the
supplied termination from port C and install the wattmeter and termination in its place. Now tune the cavity* for a
minimum reading through the wattmeter. This will establish the highest Q of the cavity and maximum power to the
antenna. Adjustment #2 may be “touched up” at this time. Adjust for a minimum reading on the wattmeter. If the
reading is high or the load becomes hot, problems may exist with the antenna or transmission line. Further testing
should be done. When testing / tuning is complete, remove the wattmeter and reconnect the supplied termination
to port C.
*When a cavity is under power, high RF currents and voltages exist on the internal surfaces. Tuning under full TX
power may damage the cavity. If there are no other options, use the lowest power available with minimum tuning
adjustments.
FIGURE 1
ISOLATOR

A 1 2 B
TX LOAD
3 WATTMETER
C

LOAD ANTENNA
FIGURE 2
ISOLATOR

A 1 2 B
TX
3
C CAVITY

WATTMETER

LOAD

All specifications subject

308 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-8013 Rev. 3/11
DUAL FERRITE ISOLATORS
BASIC TUNING INSTRUCTIONS
8
The following tuning instructions are provided for use when only a wattmeter is available. Tuning range with this method

TECHNICAL NOTES
is approximately +/- 1 MHz at VHF, +/- 2 MHz at UHF, and +/- 5 MHz at 800/900 MHz. Maximum tuning range requires
a more complex procedure and a network analyzer, and is also available from Telewave for a nominal fee. The initial
tuning should be done at the lowest power available to prevent damage to the transmitter or cavities during the tuning
procedure. Turn the transmitter off to prevent damage whenever connections are changed. This procedure can also
be used to tune 2 single isolators joined with a barrel connector.
Install the isolator in its permanent mounting position if possible. Connect the cable from the transmitter directly to
the isolator port A (Fig. 1). Remove the snap plugs from adjustment holes #1, #2, #3 and #4. Adjustment #5 & #6 are
factory set and should not be changed. Connect a terminating wattmeter, or a wattmeter with an appropriate load
attached, to the output port B. Using a non-metallic tool, tune adjustment #1, #2, #3, & #4 for a maximum reading.
Special Note - Models T-7560 and T-8660 do not have a hole #3. This is not required
above 700 MHz. Models in all bands may have reversed connections for cable routing.
(Fig. 4) Port numbers always have the same function, regardless of location.
Remove the wattmeter and the dummy load and connect the antenna and cavity to the isolator. Remove the supplied
termination from port C and connect the wattmeter and termination in its place (Fig. 2). Now tune adjustment #2 &
#3 for minimum reading on the wattmeter. Retune these adjustments several times to ensure a minimum reading.
Remove the wattmeter and termination, and reconnect the original termination to port C. Next, remove the termination
from port D and install the wattmeter & load in its place (Fig. 3). Now tune adjustment #4 for minimum reading on
the wattmeter.
Finally, tune the cavity* (Fig. 3) for a minimum reading through the wattmeter. This will establish the highest Q of the
cavity and maximum power to the antenna. Adjustment #4 may be “touched up” at this time. Adjust for a minimum
reading on the wattmeter. If the reading is high or the load becomes hot, problems may exist with the antenna or
transmission line. Further testing should be done. When testing / tuning is complete, remove the wattmeter and
reconnect the supplied termination to port D.

*When a cavity is under power, high RF currents exist on the internal surfaces. Tuning under full power may damage
the cavity. If there are no other options, use the lowest power available with minimum tuning adjustments.

ANTENNA
FIGURE 1 FIGURE 3
ISOLATOR
ISOLATOR

TX
A B

TX
1 2 3 4 A B
1 2 3 4
6 5 WATTMETER
6 5
C D
C D CAVITY

LOAD LOAD LOAD LOAD

WATTMETER

ANTENNA
FIGURE 2 FIGURE 4 LOAD
ISOLATOR

TX A B ISOLATOR

1 2 3 4 B
4 2 1
A
TX
6 5 WATTMETER 5
D C
6

C D CAVITY
ANTENNA LOAD LOAD LOAD

ISOLATOR

LOAD B
4
5
2
6
1
A
TX
CAVITY D C
WATTMETER
LOAD

WATTMETER

LOAD
LOAD

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 309
TWDS-8005 Rev. 3/11
 PASS CAVITY TUNING

IMPORTANT:
All cavities and cavity-based devices are factory tuned to the exact frequencies indicated
on the label. No further tuning or optimization is necessary. If frequency or insertion loss
must be changed, Telewave recommends that the equipment be returned to the factory
to ensure optimum performance. The instructions in this document are for use only if
factory service is not practical.

TEST EQUIPMENT MINIMUM REQUIREMENTS:

1. Calibrated RF signal generator with 0 dBm output.
2. Calibrated frequency counter or meter.
3. Calibrated RF indicator such as a network analyzer or spectrum analyzer,
with sensitivity of at least 80 dB below the RF generator output.
Tools required: 7/16" wrench and nut-driver, medium and small flat-blade screwdrivers.
NOTE: When transmitter power is passing through a cavity, high RF voltages and currents exist on the
internal surfaces. Cavity tuning should be performed using a signal generator only. If no other RF
source is available, use the lowest output power available and make only minimal adjustments.

1. TUNING THE PASS FREQUENCY

A. Adjust the signal generator to the desired pass frequency at 0 dBm output.
B. Connect the signal generator to one cavity connector, and the monitor or
analyzer to the other side.
C. Loosen the 7/16" locking nut on the center tuning shaft, and tune the shaft of
the cavity for maximum response as indicated on the analyzer.

2. INSERTION LOSS ADJUSTMENT

A. Adjust the signal generator to the desired pass frequency at 0 dBm output.
B. Loosen the three retaining screws around the loop connector. Rotate the loop
until the analyzer indicates the desired insertion loss, and balanced return loss.
Tighten the retaining screws, and repeat Step 1.

TUNING SHAFT LOCK NUT

LOOP CONNECTORS

All specifications subject

310 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-8009 Rev. 1/05
PASS-REJECT CAVITY AND DUPLEXER TUNING 8

TECHNICAL NOTES
IMPORTANT:
All cavities and cavity-based devices are factory tuned to the exact frequencies indicated
on the label. No further tuning or optimization is necessary. If frequency or insertion loss
must be changed, Telewave recommends that the equipment be returned to the factory
to ensure optimum performance. The instructions in this document are for use only if
factory service is not practical.

TEST EQUIPMENT MINIMUM REQUIREMENTS:

1. Calibrated RF signal generator with 0 dBm output.
2. Calibrated frequency counter or meter.
3. Calibrated RF indicator such as a network analyzer or spectrum analyzer,
with sensitivity of at least 80 dB below the RF generator output.
Tools required: 7/16" wrench and nut-driver, medium and small flat-blade screwdrivers.
NOTE: When transmitter power is passing through a cavity, high RF voltages and currents exist on the
internal surfaces. Cavity tuning should be performed using a signal generator only. If no other RF
source is available, use the lowest output power available and make only minimal adjustments.

1. TUNING THE PASS FREQUENCY

A. Adjust the signal generator to the desired TUNING SHAFT "T" CONNECTOR
pass frequency at 0 dBm output.
B. Connect the signal generator to one side of
the cavity "T" connector, and the monitor or
analyzer to the other side.
C. Loosen the 7/16" locking nut on the center
tuning shaft, and tune the shaft of the cavity
for maximum response as indicated on
the analyzer.

2. TUNING THE REJECT FREQUENCY

A. Adjust the signal generator to the desired
reject frequency at 0 dBm output.
B. Connect the signal generator to one side of
the cavity "T" connector, and the monitor or
LOCK NUT CAPACITOR
analyzer to the other side.
C. Tune the capacitor for maximum attenuation
LOOP CONNECTOR
of the output signal, as indicated on the
analyzer.

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 311
TWDS-8008 Rev. 3/07
 PASS-REJECT CAVITY AND DUPLEXER TUNING

3. INSERTION LOSS ADJUSTMENT

A. Adjust the signal generator to the desired pass frequency at 0 dBm output.
B. Loosen the three retaining screws around the loop connector. Rotate the loop
until the analyzer indicates the desired insertion loss. Tighten the retaining screws,
and repeat Steps 1 and 2. An increase in the insertion loss will also increase the
attenuation at the reject frequency. Minimum insertion loss occurs when the
capacitor is on the opposite side of the connector, away from the center tuning rod.
NOTE: All tuning adjustments are mutually dependent. This means that when you adjust the capacitor, the
insertion loss will change and the loop position may have to be readjusted. The center tuning may
have changed as well. Multiple adjustments will be required to achieve the best performance.

4. PASS-REJECT DUPLEXER TUNING PROCEDURE

A. Examine the labels on the top of the duplexer, and locate the TX and RX ports. The
cavity set for TX will be PASS-TX and REJECT-RX. The cavity set for RX will be PASS-RX
and REJECT-TX. If TX and RX are not marked, then you must determine which port
is connected to the lower frequency device, and which is connected to the higher
frequency device. The cavity set for the low frequency device will be PASS-LOW and
REJECT-HIGH. The cavity set for the high frequency device will be PASS-HIGH and
REJECT-LOW.

B. Tune one cavity at a time using Steps 1-3. The reject frequency of one set of cavities
is always tuned to the pass frequency of the other set.

Tune rejection on these cavities to TX frequency

RECEIVER

ANTENNA

TRANSMITTER

Tune rejection on these cavities to RX frequency

All specifications subject

312 Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice
TWDS-8008 Rev. 3/07
VSWR / RETURN LOSS CHART 8
VSWR • Return Loss • Transmitted Power % • Reflected Power %

TECHNICAL NOTES
RETURN TRANS. VOLT. POWER POWER RETURN TRANS. VOLT. POWER POWER
VSWR VSWR
VSWR LOSS LOSS REFL. TRANS. REFL. VSWR LOSS LOSS REFL. TRANS. REFL.
(dB) (dB)
(dB) (dB) COEFF. (%) (%) (dB) (dB) COEFF. (%) (%)
1.00 0.00 ∞ 0.00 0.00 100.00 0.00 1.64 4.30 12.30 0.26 0.24 94.10 5.90
1.01 0.10 46.10 0.00 0.00 100.00 0.00 1.66 4.40 12.10 0.28 0.25 93.80 6.20
1.02 0.20 40.10 0.00 0.01 100.00 0.00 1.68 4.50 11.90 0.29 0.25 93.60 6.40
1.03 0.30 36.60 0.00 0.01 100.00 0.00 1.70 4.60 11.70 0.30 0.26 93.30 6.70
1.04 0.30 34.20 0.00 0.02 100.00 0.00 1.72 4.70 11.50 0.32 0.26 93.00 7.00
1.05 0.40 32.30 0.00 0.02 99.90 0.10 1.74 4.80 11.40 0.33 0.27 92.70 7.30
1.06 0.50 30.70 0.00 0.03 99.90 0.10 1.76 4.90 11.20 0.34 0.28 92.40 7.60
1.07 0.60 29.40 0.01 0.03 99.90 0.10 1.78 5.00 11.00 0.36 0.28 92.10 7.90
1.08 0.70 28.30 0.01 0.04 99.90 0.10 1.80 5.10 10.90 0.37 0.29 91.80 8.20
1.09 0.70 27.30 0.01 0.04 99.80 0.20 1.82 5.20 10.70 0.38 0.29 91.50 8.50
1.10 0.80 26.40 0.01 0.05 99.80 0.20 1.84 5.30 10.60 0.40 0.30 91.30 8.70
1.11 0.90 25.70 0.01 0.05 99.70 0.30 1.86 5.40 10.40 0.41 0.30 91.00 9.00
1.12 1.00 24.90 0.01 0.06 99.70 0.30 1.88 5.50 10.30 0.43 0.31 90.70 9.30
1.13 1.10 24.30 0.02 0.06 99.60 0.40 1.90 5.60 10.20 0.44 0.31 90.40 9.60
1.14 1.10 23.70 0.02 0.07 99.60 0.40 1.92 5.70 10.00 0.45 0.32 90.10 9.90
1.15 1.20 23.10 0.02 0.07 99.50 0.50 1.94 5.80 9.90 0.47 0.32 89.80 10.20
1.16 1.30 22.60 0.02 0.07 99.50 0.50 1.96 5.80 9.80 0.48 0.32 89.50 10.50
1.17 1.40 22.10 0.03 0.08 99.40 0.60 1.98 5.90 9.70 0.50 0.33 89.20 10.80
1.18 1.40 21.70 0.03 0.08 99.30 0.70 2.00 6.00 9.50 0.51 0.33 88.90 11.10
1.19 1.50 21.20 0.03 0.09 99.20 0.80 2.50 8.00 7.40 0.88 0.43 81.60 18.40
1.20 1.60 20.80 0.04 0.09 99.20 0.80 3.00 9.50 6.00 1.25 0.50 75.00 25.00
1.21 1.70 20.40 0.04 0.10 99.10 0.90 3.50 10.90 5.10 1.60 0.56 69.10 30.90
1.22 1.70 20.10 0.04 0.10 99.00 1.00 4.00 12.00 4.40 1.94 0.60 64.00 36.00
1.23 1.80 19.70 0.05 0.10 98.90 1.10 4.50 13.10 3.90 2.26 0.64 59.50 40.50
1.24 1.90 19.40 0.05 0.11 98.90 1.10 5.00 14.00 3.50 2.55 0.67 55.60 44.40
1.25 1.90 19.10 0.05 0.11 98.80 1.20 5.50 14.80 3.20 2.83 0.69 52.10 47.90
1.26 2.00 18.80 0.06 0.12 98.70 1.30 6.00 15.60 2.90 3.10 0.71 49.00 51.00
1.27 2.10 18.50 0.06 0.12 98.60 1.40 6.50 16.30 2.70 3.35 0.73 46.20 53.80
1.28 2.10 18.20 0.07 0.12 98.50 1.50 7.00 16.90 2.50 3.59 0.75 43.70 56.20
1.29 2.20 17.90 0.07 0.13 98.40 1.60 7.50 17.50 2.30 3.82 0.76 41.50 58.50
1.30 2.30 17.70 0.08 0.13 98.30 1.70 8.00 18.10 2.20 4.03 0.78 39.50 60.50
1.32 2.40 17.20 0.08 0.14 98.10 1.90 8.50 18.60 2.10 4.24 0.79 37.70 62.30
1.34 2.50 16.80 0.09 0.15 97.90 2.10 9.00 19.10 1.90 4.44 0.80 36.00 64.00
1.36 2.70 16.30 0.10 0.15 97.70 2.30 9.50 19.60 1.80 4.63 0.81 34.50 65.50
1.38 2.80 15.90 0.11 0.16 97.50 2.50 10.00 20.00 1.70 4.81 0.82 33.10 66.90
1.40 2.90 15.60 0.12 0.17 97.20 2.80 11.00 20.80 1.60 5.15 0.83 30.60 69.40
1.42 3.00 15.20 0.13 0.17 97.00 3.00 12.00 21.60 1.50 5.47 0.85 28.40 71.60
1.44 3.20 14.90 0.14 0.18 96.70 3.30 13.00 22.30 1.30 5.76 0.86 26.50 73.50
1.46 3.30 14.60 0.16 0.19 96.50 3.50 14.00 22.90 1.20 6.04 0.87 24.90 75.10
1.48 3.40 14.30 0.17 0.19 96.30 3.70 15.00 23.50 1.20 6.30 0.88 23.40 76.60
1.50 3.50 14.00 0.18 0.20 96.00 4.00 16.00 24.10 1.10 6.55 0.88 22.10 77.90
1.52 3.60 13.70 0.19 0.21 95.70 4.30 17.00 24.60 1.00 6.78 0.89 21.00 79.00
1.54 3.80 13.40 0.20 0.21 95.50 4.50 18.00 25.10 1.00 7.00 0.89 19.90 80.10
1.56 3.90 13.20 0.21 0.22 95.20 4.80 19.00 25.60 0.90 7.21 0.90 19.00 81.00
1.58 4.00 13.00 0.23 0.22 94.90 5.10 20.00 26.00 0.90 7.41 0.90 18.10 81.90
1.60 4.10 12.70 0.24 0.23 94.70 5.30 25.00 28.00 0.70 8.30 0.92 14.80 85.20
1.62 4.20 12.50 0.25 0.24 94.40 5.60 30.00 29.50 0.60 9.04 0.94 12.50 87.50

All specifications subject

Telewave, Inc. • San Jose, CA • 1-800-331-3396 ~ 408-929-4400 • www.telewave.com to change without notice 313
INDEX
1 TRANSMITTER COMBINING FREQ. (MHz) DESCRIPTION
LOWBAND COMBINERS 30-88 LOWBAND LOW LOSS COMBINERS . . . . . . . . . . . . . . . . . . . . . . . . . 6
M104-150-4TPC 148-170 4 CHANNEL LOW LOSS COMBINER . . . . . . . . . . . . . . . . . . . . . . . . . 7
M108-150-TRM 148-174 8 TO 10 CHANNEL LOW LOSS COMBINER . . . . . . . . . . . . . . . . . . . . 8
M101-150-8TRM19 148-174 LOW LOSS VHF COMBINER FOR CLOSE SPACING . . . . . . . . . . . . . 9
M101-150-8TRM 148-174 LOW LOSS VHF COMBINER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
M106-450-4, 8TPC 400-512 COMPACT TRANSMITTER COMBINER PANELS. . . . . . . . . . . . . . . 11
M107-250, 350, 450, TP 200-512 LOW LOSS TRANSMITTER COMBINER PANELS. . . . . . . . . . . . . . . 12
M107-250, 350, 450, TRM 200-512 EXPANDABLE TRUNKING COMBINERS . . . . . . . . . . . . . . . . . . . . . 13
M108-450-10TRM 400-512 UHF TRUNKING TRANSMITTER COMBINER . . . . . . . . . . . . . . . . . 14
M108-450-8TRM3Q 400-512 LOW LOSS UHF TRUNKING COMBINER . . . . . . . . . . . . . . . . . . . . . 15
M101-450-8TRM19-3Q 400-512 LOW LOSS UHF COMBINER FOR CLOSE SPACING . . . . . . . . . . . . 16
M101-450-8TRM 406-512 LOW LOSS UHF COMBINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
M108-760-10TRM 746-869 LOW LOSS 760/860 MHz TRUNKING COMBINER . . . . . . . . . . . . . 18
M106-860-5TP, 10TP 851-869 COMPACT TRUNKING COMBINER PANELS. . . . . . . . . . . . . . . . . . 19
M107-860-5TRM-HP, 10TRM-HP 851-869 COMPACT TRUNKING COMBINER 175 WATTS . . . . . . . . . . . . . . . 20
M101-860-10TRM 806-869 LOW LOSS 800/900 MHz TRUNKING COMBINER . . . . . . . . . . . . . 21
TC860 851-869 CERAMIC ENHANCED TRUNKING COMBINER . . . . . . . . . . . . . . . 22
TW860-2HRB1N, 4HRB1N 851-869 COMPACT HYBRID COMBINERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
M108-900-10TRM3Q 896-941 LOW LOSS 900 MHz TRUNKING COMBINER . . . . . . . . . . . . . . . . . 24
M101-900-10TRMH 896-941 900 MHz HYBRID TRUNKING COMBINER. . . . . . . . . . . . . . . . . . . . 25
BANDPASS/NOTCH COMBINERS 66-512 1 NOTCH, 1-3 PASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
HYBRID COMBINERS 118-960 2 AND 4 CHANNEL HYBRID COMBINERS. . . . . . . . . . . . . . . . . . . . 27

2 RECEIVER MULTICOUPLERS FREQ. (MHz) DESCRIPTION

TWR2, TWR4 PANELS 132-960 RECEIVER DISTRIBUTION PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TWR8 / 16 / 24 STD PANELS 30-960 RECEIVER DISTRIBUTION PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . 31
TWR8 / 16 -1R COMPACT PANELS 30-960 COMPACT RECEIVER PANELS - 8-16 CHANNELS. . . . . . . . . . . . . . 33
TWR24 / 32 -2R PANELS 30-960 COMPACT RECEIVER PANELS - 24-32 CHANNELS . . . . . . . . . . . . 35
PS- SERIES 10-1000 RECEIVER POWER SPLITTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TLA SERIES 30-960 LOW NOISE BIPOLAR INLINE PREAMPLIFIERS. . . . . . . . . . . . . . . . 38
TGA SERIES 132-960 PHEMT PREAMPLIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
TWR1 SERIES 132-960 BROADBAND RACK MOUNT PREAMPLIFIERS. . . . . . . . . . . . . . . . 40
TOWER TOP PREAMPLIFIERS 300-901 TOWER TOP PREAMPLIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TTPA-4544 455-512 TOWERTOP PREAMPLIFIER / PRESELECTOR . . . . . . . . . . . . . . . . . 42
TTPA-8626, 8644, 8648 806-960 TOWER TOP PREAMPS AND BASE UNIT . . . . . . . . . . . . . . . . . . . . 43
TTBS-4586 TOWER TOP BASE POWER SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . 44
TPCP-1342C, TPCP-1343C 118-136 COMPACT AIRBAND PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . 45
TPCP-1344C, TPCP-1344CM 118-136 COMPACT AIRBAND PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . . . 46
TPCP-1442C, TPCP-1443C 135-151 COMPACT BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . 47
TPCP-1444C, TPCP-1444CM 135-151 COMPACT BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . 48
TPCP-1446C 135-151 COMPACT BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . 49
TPCP-1414, 1514, 1614, 1714 140-180 COMPACT BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . 50
TPCP-1542C, TPCP-1543C 148-174 COMPACT BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . 51
TPCP-1544C, TPCP-1544CM 148-174 COMPACT BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . 52
TPCP-1546C 148-174 COMPACT BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . 53
TPCP-1554, 1556 148-174 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
TPCP-2244, 2246 200-300 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
TPCP-3544, 3546, 3548 300-400 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
TPCP-4542 400-512 BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
TPCP-4544, 4546, 4548 400-512 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TPCP-45215, 46215, 45215-2 450-470 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
TPCP-4514 450-470 COMPACT BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . 60
TPCP-8642, TPCP-8644 806-960 BANDPASS PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
TTPP-8642 806-960 BANDPASS PRESELECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
TPCP-8626, TPCF-8926 806-890 COMBLINE PRESELECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
3 POWER MONITORING FREQ. (MHz) DESCRIPTION
MODEL 44L1, L1P 2-200 BROADBAND RF WATTMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
MODEL 44A, AP 20-1000 BROADBAND RF WATTMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
PM-1A, 2A SERIES 30-960 RF POWER MONITORS - SINGLE, DUAL . . . . . . . . . . . . . . . . . . . . . 70
PM1C1S 30-960 RF WATTMETER / ALARM PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . 71
PM5C1S 30-960 RF WATTMETER / ALARM PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . 72
PM10C2S1C 30-960 RF WATTMETER PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
4 ISOLATORS & LOADS FREQ. (MHz) DESCRIPTION
TWL-01, 35, 60 0-2500 COAXIAL RF TERMINATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
TWL-50, 75, 100, 100HS 0-2500 COAXIAL RF TERMINATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
TWL-150, TWL-300 0-2500 HIGH POWER TERMINATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
T-1030, 1060 66-108 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 79
T-1530, 1560 118-174 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 80
T-1530M, 1560M 148-174 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 81
T-2230, 2260 216-252 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 82
T-3530, 3560 300-400 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 83
T-4530, 4560 400-512 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 84
T-7530, 7560 700-800 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 85
T-8630, 8660 806-960 SINGLE / DUAL FERRITE ISOLATORS . . . . . . . . . . . . . . . . . . . . . . . . 86
HIGH POWER ISOLATORS 148-960 SINGLE AND DUAL STAGE TO 400 WATTS. . . . . . . . . . . . . . . . . . . 87
TS150, 450, 900 SERIES 118-960 INTERMOD SUPPRESSION PANELS . . . . . . . . . . . . . . . . . . . . . . . . . 88
THRP - REPEATER PANEL 138-960 HIGH PERFORMANCE REPEATER PANEL . . . . . . . . . . . . . . . . . . . . 89
5 CAVITIES & FILTERS FREQ. (MHz) DESCRIPTION
TWPC-0310, 0410 30-50 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TWPC-0412-1, TWNC-0412-1 40-50 BANDPASS & NOTCH CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
TWPC-1005-1,2 88-108 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
TWPC-1008-1, 2 88-108 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
TPRC-1005-1, 2 88-108 PASS/REJECT CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
TPRC-1008-1, 2 88-108 PASS/REJECT CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
TWNC-1005-1, 2 88-108 NOTCH CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
TWNC-1008-1, 2 88-108 NOTCH CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
TWPC-1405-1, 2, 3 118-148 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
TWPC-1408-1, 2 118-148 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
TWPC-1410-1, 2 118-148 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
TPRC-1405-1,2 118-148 PASS/REJECT CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
TWPC-1505-1, 2, 3 148-174 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
TWPC-1508-1, 2 148-174 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
TWPC-1510-1, 2 148-174 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
TPRC-1505-1, 2 148-174 PASS/REJECT CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
TWNC-1505-1, 2 148-174 NOTCH CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
TWPC-2205-1, 2, 3 200-300 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
TWPC-2208-1, 2 200-300 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
TWPC-3505-1, 2, 3 300-400 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
TWPC-4504-1, 2, 3 400-512 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
TWPC-4505-1, 2, 3 400-512 BANDPASS CAVITIES - ¾ WAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
TWPC-4510-1, 2 400-512 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
TWPC-7908-1, -2 776-825 BANDPASS CAVITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
TWPC-8608-1,2 800-970 BANDPASS CAVITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
TLF SERIES 40-960 TRANSMITTER LOW PASS FILTERS. . . . . . . . . . . . . . . . . . . . . . . . . . 142
THF SERIES 40-960 HIGH PASS FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
TWX-50, 150 50-150 RECEIVER CRYSTAL FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
6 DUPLEXERS FREQ. (MHz) DESCRIPTION
TPRD-0354, 0454 30-50 PASS / REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
TPRD-0384, 0484 30-50 PASS / REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
TPRD-0754 66-88 PASS / REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
TPRD-1084 88-108 PASS / REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
TPRD-1344C, CM 118-136 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 151
TPRD-1444C, CM 135-151 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 152
TPRD-1446C 135-151 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 153
TPRD-1454, 1456 118-148 PASS/REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
TPRD-1484, 1486 118-148 PASS/REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
TPRD-1544F 148-174 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 157
TPRD-1543C 148-174 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 158
TPRD-1544C, CM 148-174 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 159
TPRD-1546C 148-174 COMPACT PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . 160
TPCD-1553, 1554, 1556 148-174 BANDPASS DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
TPRD-1554, 1556 144-174 PASS/REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
TPRD-1566 136-174 PASS/REJECT DUPLEXER - DUAL NOTCH. . . . . . . . . . . . . . . . . . . . 165
TPRD-1584, 1586 148-174 PASS/REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
TPRD-2254 200-300 PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
TPCD-4554, 4556 400-512 BANDPASS DUPLEXERS - ¾-WAVE . . . . . . . . . . . . . . . . . . . . . . . . . 169
TPRD-4544, 4744 450-470 PASS-REJECT DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
 TPRD-4546 400-512 PASS-REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
TPRD-4554, 4556 400-512 BANDPASS/REJECT DUPLEXERS - ¾-WAVE . . . . . . . . . . . . . . . . . . 175
TTPD-7644 763-869 BANDPASS/REJECT DUPLEXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
TTPD-8642, 8644 806-960 BANDPASS/REJECT DUPLEXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
TPRD-8644 763-869 PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
TPRD-9044 890-960 PASS/REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
TPRD-12044 1240-1300 PASS-REJECT DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
TPCD-8626 806-960 COMBLINE DUPLEXER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
TPCD-8626HP 806-960 HIGH POWER COMBLINE DUPLEXER . . . . . . . . . . . . . . . . . . . . . . . 188
TMND-0716, 0816 70-85 MID-BAND MOBILE DUPLEXERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
TMND-1516, 1616, 1716 148-174 MOBILE DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
TMND-4416, 4516, 4616 440-470 MOBILE DUPLEXERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
TMND-4716, 4816, 4916, 5016 470-512 COMPACT MOBILE DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
TMND-7616 769-805 COMPACT MOBILE DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
TMND-8616 860-870 COMPACT MOBILE DUPLEXER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
7 ANTENNAS FREQ. (MHz) DESCRIPTION
COLLINEAR ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
ANT125F2 118-136 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 199
ANT135F2 125-150 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 200
ANT140F2 135-165 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 201
ANT150F2 148-174 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 202
ANT150F6 138-175 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 203
ANT195F2 174-216 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 204
ANT220F2 195-260 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 205
ANT220F6 216-225 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 206
ANT355F6 340-370 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 207
ANT385F6 370-400 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 208
ANT400F2 360-455 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 209
ANT415F6 405-440 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 210
ANT415F8 395-436 FIBERGLASS COLLINEAR ANTENNA 8 dBd . . . . . . . . . . . . . . . . . . 211
ANT425F2 380-470 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 212
ANT450F2 420-480 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 213
ANT450F6 445-480 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 214
ANT450F10 430-475 FIBERGLASS COLLINEAR ANTENNA 10 dBd . . . . . . . . . . . . . . . . . 215
ANT480F2 450-512 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 216
ANT500F6 470-512 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 217
ANT500F10 470-512 FIBERGLASS COLLINEAR ANTENNA 10 dBd . . . . . . . . . . . . . . . . . 218
ANT734-960F2 734-960 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 219
ANT770F2 734-806 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 220
ANT770F6 746-806 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 221
ANT825F6 745-860 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 222
ANT850F2 806-896 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 223
ANT850F6 806-896 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 224
ANT850F10 806-896 FIBERGLASS COLLINEAR ANTENNA 10 dBd . . . . . . . . . . . . . . . . . 225
ANT900F2 880-960 FIBERGLASS COLLINEAR ANTENNA 2.5 dBd. . . . . . . . . . . . . . . . . 226
ANT940F6 870-965 FIBERGLASS COLLINEAR ANTENNA 6 dBd . . . . . . . . . . . . . . . . . . 227
ANT940F10 870-965 FIBERGLASS COLLINEAR ANTENNA 10 dBd . . . . . . . . . . . . . . . . . 228
ANT960F0 900-960 WIRELESS DATA ANTENNA 2 dBd. . . . . . . . . . . . . . . . . . . . . . . . . . 229
F2 COLLINEAR INSTALLATION INSTALLATION F2 ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
F6/8/10 COLLINEAR INSTALLATION INSTALLATION F6-F8-F10 ANTENNAS . . . . . . . . . . . . . . . . . . . . . . 231
ANTC482 CLAMP INSTALLATION ANTC482 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
ANTC483 CLAMP INSTALLATION ANTC483 / 483SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

DIPOLE ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

ANT37D 33.5-41 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
ANT40D 37.5-44.5 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
ANT42D 38.5-47 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
ANT44D 41.5-48 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
ANT50D 45-54 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
ANT70D 63-78 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
ANT75D 66-88 SINGLE DIPOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
ANT90D 88-108 SINGLE DIPOLE FM BROADCAST . . . . . . . . . . . . . . . . . . . . . . . . . . 242
ANT120D, D3 110-138 SINGLE AND DIPOLE ARRAY 1 TO 6 dBd . . . . . . . . . . . . . . . . . . . . 243
ANT150D, D3, D6-9 138-174 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 244
ANT150D7-12 138-174 DIPOLE AND DIPOLE ARRAY 7 TO 12 dBd . . . . . . . . . . . . . . . . . . . 245
ANT220D, D3, D6-9 216-252 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 246
 ANT275D, D3, D6-9 230-330 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 247
ANT350D, D3, D6-9 300-360 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 248
ANT375D, D3, D6-9 345-405 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 249
ANT400D, D3, D6-9 360-450 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 250
ANT425D, D3, D6-9 380-470 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 251
ANT450D, D3, D6-9 406-512 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 252
ANT450D7-12 406-512 DIPOLE AND DIPOLE ARRAY 7 TO 12 dBd . . . . . . . . . . . . . . . . . . . 253
ANT500D, D3, D6-9 470-550 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 254
ANT750D, D3, D6-9 700-825 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 255
ANT900D, D3, D6-9 800-1000 DIPOLE AND DIPOLE ARRAY 1 TO 9 dBd . . . . . . . . . . . . . . . . . . . . 256
DIPOLE MOUNTING DIPOLE MOUNTING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 257
DIPOLE PATTERN ADJUST 30-300 DIPOLE PATTERN ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
DIPOLE PATTERN ADJUST 300-1000 DIPOLE PATTERN ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 260

YAGI ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

ANT144Y5-WR 138-152 YAGI ANTENNA 5 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
ANT150Y7-WR 148-174 YAGI ANTENNA 5 dBd / 7 dBi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
ANT150Y10H 144-174 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
ANT220Y7-WR 216-240 YAGI ANTENNA 5 dBd / 7 dBi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
ANT390Y5-WR 370-410 YAGI ANTENNA 5 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
ANT410Y10-WR 405-420 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
ANT420Y10-WR 415-450 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
ANT430Y10-WR 420-440 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
ANT440Y10-WR 438-455 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
ANT450Y5-WR 420-470 YAGI ANTENNA 5 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
ANT450Y7-WR 450-470 YAGI ANTENNA 7 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
ANT450Y10-WR 450-470 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
ANT475Y5-WR 450-512 YAGI ANTENNA 5 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
ANT490Y10-WR 470-500 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
ANT500Y10-WR 485-512 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
ANT740Y8-WR 698-787 YAGI ANTENNA 8 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
ANT750Y5-WR 734-806 YAGI ANTENNA 5 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
ANT830Y10-WR 800-870 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
ANT850Y10-WR 824-896 YAGI ANTENNA 10 dBd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
ANT930Y10-WR 885-975 YAGI ANTENNA 10.2 dBd / 12.3 dBi . . . . . . . . . . . . . . . . . . . . . . . . . 282
ANT930Y12-WR 880-960 YAGI ANTENNA 12.2 dBd / 14.3 dBi . . . . . . . . . . . . . . . . . . . . . . . . . 283
ANT1470Y12-WR 1425-1535 YAGI ANTENNA 12.2 dBd / 14.3 dBi . . . . . . . . . . . . . . . . . . . . . . . . . 284
ANT1800Y10-WR 1710-1880 YAGI ANTENNA 10.2 dBd / 12.3 dBi . . . . . . . . . . . . . . . . . . . . . . . . . 285
ANT1920Y9-WR 1850-1990 YAGI ANTENNA 9.3 dBd / 11.4 dBi . . . . . . . . . . . . . . . . . . . . . . . . . . 286
ANT1920Y12-WR 1850-1990 YAGI ANTENNA 12.2 dBd / 14.3 dBi . . . . . . . . . . . . . . . . . . . . . . . . . 287
ANT2045Y12-WR 1920-2170 YAGI ANTENNA 12 dBd / 14.1 dBi. . . . . . . . . . . . . . . . . . . . . . . . . . . 288
ANT2350Y12-WR 2300-2500 YAGI ANTENNA 12 dBd / 14.1 dBi. . . . . . . . . . . . . . . . . . . . . . . . . . . 289
ANT2400Y12-WR 2400-2500 YAGI ANTENNA 12 dBd / 14.1 dBi. . . . . . . . . . . . . . . . . . . . . . . . . . . 290
ANT2600Y12-WR 2500-2700 YAGI ANTENNA 12 dBd / 14.1 dBi. . . . . . . . . . . . . . . . . . . . . . . . . . . 291
YAGI INSTALLATION SHEET 138-960 INSTALLATION FOR YAGI ANTENNAS . . . . . . . . . . . . . . . . . . . . . . 292
YAGI INSTALLATION SHEET 1000-2700 INSTALLATION FOR YAGI ANTENNAS . . . . . . . . . . . . . . . . . . . . . . 293

WIDEBAND ANTENNAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294

ANT220K 30-3000 WIDEBAND DISCONE ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . 295
ANT260K, KT 75-3000 WIDEBAND DISCONE ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . 296
ANT280S 118-3000 WIDEBAND DISCONE ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . 297
ANT400K, KS 400-3000 WIDEBAND DISCONE ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ANT500WR 500-3000 WIDEBAND DIRECTIONAL ANTENNA . . . . . . . . . . . . . . . . . . . . . . 299

MOUNTING HARDWARE ANTENNA MOUNTING HARDWARE. . . . . . . . . . . . . . . . . . . . . . . . 300

ANTENNA CONNECTION SEALING ANTENNA CONNECTION WEATHERPROOFING . . . . . . . . . . . . . 301
ANTPD 204, 206 24-72 LOW BAND RF POWER DIVIDERS . . . . . . . . . . . . . . . . . . . . . . . . . . 302
ANTPD SERIES 24-2500 RF POWER DIVIDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
TS-1546, TS-1580, TS-4680 132-960 CROSSBAND COUPLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

8 TECHNICAL NOTES DESCRIPTION

SINGLE ISOLATOR TUNING SINGLE ISOLATOR TUNING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
DUAL ISOLATOR TUNING DUAL ISOLATOR TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
PASS CAVITY TUNING PASS CAVITY TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
PASS-REJECT CAVITY/DUPLEXER TUNING P-R CAVITY/DUPLEXER TUNING. . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
VSWR / RETURN LOSS CHART VSWR / RETURN LOSS CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Product Warranty / Terms of Sale

Products sold by Telewave, Inc. (Seller) and covered by this Warranty are warranted to be free from defects in material and
workmanship at the time of and for the period specified below after delivery to the Buyer. Seller’s entire warranty obligation
is limited to making adjustments by repair, replacement, or refunding the purchase price of any product which is returned
to the Seller as provided below within the specified period from the date of shipment by the Seller. In no event shall Seller
be liable for direct, special, or consequential damages for breach of warranty.

Warranty periods:
Antennas and mounting hardware - 5 years
All other products - 1 year

Adjustment will not be allowed for products which have been damaged by lightning, subjected to abuse, improper applica-
tion or installation, alteration or accident, or negligence in use, storage, transportation or handling. Alteration or removal
of the serial number or identification markings voids the Warranty. Seller shall have the right of final determination as to the
existence and cause of a defect, whether adjustment will be allowed, and if allowed, whether adjustment will be by repair,
replacement, or refund. Where adjustment is not allowed, a charge of 5% of the original purchase price will be made to the
Buyer to cover the Seller’s cost of inspection and handling.

Shipping and packaging instructions must be obtained from the Seller before products are returned for adjustment. The
Buyer will pay for packing, transportation, and transit insurance costs for returned products. The Seller reserves the right to
discontinue models at any time or change specifications, design, or price without notice and without incurring any obliga-
tion. Products will be returned to the Buyer with transportation cost collect.

Subject to the provisions of its “Patent Indemnity” clause, the Seller also warrants that it has the right to sell its products,
that the Buyer shall have and enjoy quite possession thereof as against any lawful claims existing at the time of the sale by
the Seller, and that said products are free from any charge of encumbrance in favor of third persons existing at the time of
sale by the Seller.

The foregoing constitutes the Seller’s entire warranty, express, implied or statutory with respect to its products and states
the full extent of its liability for breach of Warranty and for damages, whether direct, special or consequential resulting form
any such breach. No change whatsoever thereto shall be binding upon the seller unless made in writing and signed by a
duly authorized representative of the Seller.

RETURN / RMA PROCEDURE:

Please contact Telewave via phone, fax, or email to discuss any product issues with a sales
engineer. Many issues occur due to incorrect installation, misconfiguration or irregularities
within an existing system, and these can often be resolved at no charge without return of
products.
1. Contact Telewave for technical assistance at sales@telewave.com or 1-800-331-3396.
2. Telewave will transfer the call or email to the appropriate department.
3. If it is determined that the product(s) should be returned, the Telewave RMA Dept will ask
customer to provide billing and return shipping addresses, product model and serial
number (if applicable), date of purchase, and where item was purchased.
4. Customer ships product(s) back to Telewave at customer's expense:
-- Write RMA number on the outside of the box(es)
-- Include a description of the problem with the product(s)
-- Ship via a trackable shipping method (UPS, Fedex, etc.)
-- Retain proof of shipment and tracking information
5. Product(s) are received by Telewave and evaluated by the appropriate department.
Customer is contacted by RMA department before any charges are incurred.
6. Telewave reserves the right to charge for parts, labor, and freight in the event that the issue
is not covered under warranty.
7. Telewave will return original, repaired or replacement item at customer's expense unless
covered by warranty.

© 2014 Telewave, Inc. No portion of this document may be reproduced for any reason without express written permission.
 TELEWAVE, INC.

TRANSMITTER COMBINERS • ANTENNAS • FILTERS • WATTMETERS • RF POWER

MONITORS • COUPLERS • HIGH-Q CAVITIES • PREAMPLIFIERS • IM SUPPRESSION
RECEIVER MULTICOUPLERS • PRESELECTORS • DUPLEXERS • ISOLATORS
POWER DIVIDERS • RF TERMINATIONS • WIRELESS SYSTEM ENGINEERING

Telewave, Inc. • 660 Giguere Court • San Jose, CA 95133 ~ 1-800-331-3396 • 408-929-4400 • www.telewave.com