MODERN EDUCATION SOCIETY COLLEGE OF ENGINEERING
MODERN EDUCATION SOCIETY’s COLLEGE OF ENGINEERING
19, LATE PRIN V.K. JOAG PATH, WADIA COLLEGE CAMPUS, PUNE 411001
TOPIC :- AUTOMATED DRAIN CLEANER PROJECT(SOLAR POWERED)
DATE- 21/5/2021
SUBMITTED BY -: MIHIKA
DESAI
PROJECT BY-
Vinayak Dhaybar
Mihika Desai
Tejas Khatpe
Somnath Sapkal
Piyush Chaudhary
SPECIAL THANKS
We would like to take this opportunity to thank my
internal guide Prof. SACHIN GADEWAR for giving us all
the help and guidance we needed. We are really grateful
to them for their kind support. Their valuable
suggestions were very helpful.
Our special thanks to Prof. Vilas Mane for providing
various resources for our Project.
Aim:-
To clean drain/gutter with the help of motor powered by battery and solar
grid.
Objective:-
To effectively collect all the garbage following in the drains like bottles,
plastic, and other garbage particularly of a definite size. Also to reduce man
power and also to decrease the spread of diseases to an extent.
Components :-
• DC Motor
• Collector Jaw
• Chain
• Sprockets
• Couplings
• Shaft
• Collector Bin
• Joints & Mounts
• Screws & Bolts
ABSTRACT
Wastewater is characterized as the stream of utilized water from homes,
organizations, ventures, business exercises and foundations which are
subjected to the treatment plants by a precisely planned and built system
of funnels. There are no occasions for wastewater treatment, and most
plants work 24 hours each day of the week. Wastewater treatment plants
take a shot at basic purpose of the water cycle, helping nature shields
water from the intemperate contamination. But the abundant amount of
undesirables in the waste water such as solid wastes and other form of
materials that do not form the waste water treatment can overwhelm the
system at times due to rainfall and natural forces. In order to remove a
certain amount of solid waste and undesirables from the waste water we
use the automatic gutter cleaning machine which is intended to as a check
point at various focus points where the waste get accumulated. Thus it
reduces the work done by the treatment plan and facilitates smooth flow
of waste water system
INTRODUTION
Cleaning of drains/gutters has always been a problem. Labours cleaning
gutters & drain seems unethical and also leads to a high risk of them
catching infections or poisoning due to large amounts of waste/chemicals
in them. Also throwing of bottles/plastics and other such objects into the
gutters lead to narrowing and eventually blockage in gutter flow. This leads
to overflow in many cases. This system uses an automated gutter/drain
cleaning system that lets fluids flow through it but catches large solid
waste like bottles & plastic and accumulates it. So gutter cleaners need to
just clean these gutter cleaning systems installed at points instead of
cleaning entire gutter floors. If the garbage are allowed to flow they will
end up flowing down to recreational beaches used for tourism purposes.
WORKING
The device is placed across drain so that only water flow through the lower
grids, waste like bottles etc. Floating waste in the drain is lifted by the
teeth which are connected to chain. This chain is attached with gear driven
by motor. When motor runs the chain starts to circulate making teeth to lift
up. The waste material are lifted by teeth and accumulated in the storage
tank. Finger shaped clasp(lifting teeth) is attached to the chain which is
used to pick up the solid waste from drain and carries it and throws it away
in waste bucket attached at backside of drainage system model. This
process continues automatically by the help of motor in current supply in
order to avoid blockage of drains and enhance sewage treatment system.
The motor will be powered by the battery which will be in turn be charged
by the solar grid so as to avoid recharging of battery every now and then.
The battery will be shielded and protected by in boxing it so that water
doesn’t reach it. Also to ensure the working during rainy season it would be
better to shield it.
CONCLUSIONS
In the treatment system of drainage Waste water control by the motor,
roller chain and sprocket, lifter and the collecting bin to achieve semi-
automatic control of sewage waste water treatment. It consists of a stable
operation, low cost and good effect. By this proposed system, the man
power will be reduced. On the basis of these result we can conclude that it
is an innovative method of minimizing manual stress and thus very much
reliably stabilizing the in the pond. The project is very useful for the small
scale works.
REFERENCES
• https://nevonprojects.com/automated-draingutter-cleaner-project/
• https://www.researchgate.net/publication/328902622_DESIGN_AND_FAB
RICATION_OF_AUTOMATED_DRAINGUTTER_CLEANER_MACHINE
THANK YOU
