Condensate Pot
Parker Condensate Pots for Small
Bore Tubing Systems
Enhance flow
measurement accuracy
The primary use for the Parker range
of condensate pots is to increase the
accuracy of flow measurement in steam
pipelines. They provide an interface
between the vapour phase and the
condensed phase in the impulse lines.
The condensate pots are available in a
range of materials and have been designed
in accordance with ASME VIII Div 1 and
produced in an ASME coded workshop. All
condensate pots are CE* marked to PED
2014/68/EU for use with Group 2 Gases.
Installation can be either vertical or
horizontal lines between the primary (Flow
Meter) and the secondary (transmitter/
gauge) to act as a barrier to the line fluid
permitting direct sensing of the flow
conditions. Units should be mounted at the
same level minimising possible error that
could arise due to unequal head of fluid in
the connecting pressure lines. Please see Features
our Condensate Pot Installation Guide. • CE* marked to PED 2014/68/EU • ASME VIII U stamping and TR CU
certification available
Typical industry applications include: • High/Low Pressure Rating options
Refineries, Power plants, Chemical and • Parker A-LOK® ended outlets
• Available in 0.5 to 5.0L
Petrochemical, Steel plants and other
• Range of exotic materials
process industries.
* For condensate pots with internal volumes of 1 litre or less, a CE mark is not permitted as they
are covered by a manufacturers declaration under SEP
Ordering information - Part Number Configurator
COND LP 1.0L 1 1 4 7 3 316
Series **Pressure Volume Material
Condensate COND Low Pressure LP 0.5L Stainless Steel 316
Pots 1.0L
High Pressure HP Monel M
See design pressure 1.5L Stainless Steel 304
table 2.0L Steel CS
3.0L 6Mo 6MO
5.0L
N 1/2 N3 N4 N5 N6
1/4” Fem NPT 1 1/4” Fem NPT 1 1/4” Fem NPT 1 1/4” Fem NPT 1 1/4” Fem NPT 1
1/2” Fem NPT 2 1/2” Fem NPT 2 1/2” Fem NPT 2 1/2” Fem NPT 2 1/2” Fem NPT 2
1” Fem NPT 3 1” Fem NPT 3 1” Fem NPT 3 1” Fem NPT 3 1” Fem NPT 3
1/2” A-LOK® 4 1/2” A-LOK® 4 1/2” A-LOK® 4 1/2” A-LOK® 4 1/2” A-LOK® 4
M12 A-LOK® 5 M12 A-LOK® 5 M12 A-LOK® 5 M12 A-LOK® 5 M12 A-LOK® 5
1” A-LOK® 6 1” A-LOK® 6 1” A-LOK® 6 1” A-LOK® 6 1” A-LOK® 6
M25 A-LOK® 7 M25 A-LOK® 7 M25 A-LOK® 7 M25 A-LOK® 7 M25 A-LOK® 7
1/4” BSPT 8 1/4” BSPT 8 1/4” BSPT 8 1/4” BSPT 8 1/4” BSPT 8
1/2” BSPT 9 1/2” BSPT 9 1/2” BSPT 9 1/2” BSPT 9 1/2” BSPT 9
Not required 0 Not required 0 Not required 0 Not required 0
Dimensional Details **Design Pressures
Capacity Diameter Length ‘L’ Material LP HP
0.5 Litres 73.0mm 246mm Stainless Steel 132 190
1.0 Litres 88.9mm 282mm Monel 107 154
2.0 Litres 114.3mm 347mm Stainless Steel 131 189
3.0 Litres 114.3mm 482mm Steel 112 163
5.0 Litres 114.3mm 754mm 6Mo 150 217
Certification / Design Codes
All condensate pots are designed in accordance with ASME VIII Div 1 and
produced in an ASME Coded workshop. All are CE* Marked to PED 2014/68/
EU for use with Group 2 Gases (non hazardous).
ASME VIII U stamping and TR CU certification are available at extra cost.
Design temperature 100oC.
**Other pressures, temperatures and materials available as special order. For these applications please state
pressure, temperature and material requirements.
© 2017 Parker Hannifin Corporation. All rights reserved.
Parker Hannifin Ltd. CATALOGUE REF: 3010-CP/11/17
Instrumentation Products Division, Europe
Riverside Road, Pottington Business Park,
Barnstaple, Devon, EX31 1NP
United Kingdom
Tel.: +44 (0) 1271 31 31 31
Fax: +44 (0) 1271 37 36 36
www.parker.com/ipd
