Scribd
Upload
340 views2 pages

Wp45L Data Sheet: High Quality. High Performance. High Pressure

The document provides technical specifications and performance data for the WP45L compressor package from Sauer USA. It lists flow rates and power requirements at different operating pressures, as well as motor ratings, dimensions, cooling requirements, and other technical details. The package includes components like filters, coolers, separators, gauges, valves, and controls to operate the two-stage compressor safely and automatically. Optional equipment can be added for different applications.

Uploaded by

Tanay Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
340 views2 pages

Wp45L Data Sheet: High Quality. High Performance. High Pressure

The document provides technical specifications and performance data for the WP45L compressor package from Sauer USA. It lists flow rates and power requirements at different operating pressures, as well as motor ratings, dimensions, cooling requirements, and other technical details. The package includes components like filters, coolers, separators, gauges, valves, and controls to operate the two-stage compressor safely and automatically. Optional equipment can be added for different applications.

Uploaded by

Tanay Shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

High Quality. High Performance. High Pressure.

245 Log Canoe Circle


Stevensville, Maryland 21666
WP45L DATA SHEET T 410.604.3142
F 410.604.3209

www.sauerusa.com

WP45L Data Sheet


Speed
Operating Pressure 1170 RPM 1770 RPM
UNITS
  (60 Hz) (60 Hz)
23.2 35.7 SCFM
145 PSIG
8.7 13.3 HP
Flow & Power

22.2 34.3 SCFM


290 PSIG
9.7 14.6 HP
20.8 33.2 SCFM
435 PSIG
10.2 15.4 HP
20.0 30.6 SCFM
580 PSIG
10.7 16.1 HP

Motor rating 10 15 HP
Current @ 460 Volts 13.4 18 Amps
Current @ 230 Volts 26.8 36 Amps
Weight of block and motor 700 700 Pounds
Noise level @ 3 ft per DIN45635 83 87 dB(A)
Technical Specifications

Heat dissipation 34,000 51,000 Btu/hr


Cooling air needed 1,000 1,530 CFM
Residual oil content at gas outlet (without
<5 mg/m3
filtration)
Delta temperature (gas oultet vs. ambient) 16 22 °F
Operational ambient temperature range 40-130 °F
Operating pressure range 100-580 psig
Oil sump capacity 5.5 Quarts
Dimensions of block and motor (L x W x H) 48 X 29 X 32 Inches
Cooling method Air-Cooled
Drive type Direct Drive
Stages/Cylinders 2/2
* All data is with 5 % tolerance and is related to ambient conditions of 68 ° F and 14.7 PSIA.
High Quality. High Performance. High Pressure.

Package Includes:
 Air intake and silencing filter
 Intercoolers and aftercooler
 Oil and water separators after the 1st and 2nd stages
 Safety valve after each stage
 1st and 2nd stage pressure gauges
 Solenoid valves (115 V / 60 Hz) for automatic drainage of the separators
 Unloaded starting relief and automatic condensate drain system
 Condensate demister to easily dispose of condensate drainage
 Assembly of compressor and electric motor
 Resilient mounts including drainage hoses and air/gas outlet hose
 460/3/60 electric motor with IP 55 (TEFC) protection
 Non-return valve mounted to air/gas outlet hose
 Low oil level shutdown switch
 High air/gas temperature shutdown switch mounted at the air/gas outlet of the
compressor
 Compressor control system (including motor starter) for starting/stopping the
compressor, and monitoring the oil level, air/gas outlet temperature and outlet pressure
of the compressor
 Complete package wired and mounted on a skid
 Air/gas pressure sensor for automatic start/stop (supplied loose)

Standard warranty is 15 months from date of shipment or 12 months after initial installation
and start-up, whichever comes first. Ask your Sauer USA representative if your project
requires an extended or alternative warranty period.

Optional equipment:
 Final receiver packages with the necessary components supplied
 Diesel motor driven
 Modified for 50 Hz power supply
 Modified for gas compression and higher inlet pressures (>4.5 psig)
 Customized controls for user specified monitoring and operation
 Final air/gas filtration with varying levels of air/gas quality
 Sound dampening canopy
 Weather resistant canopy
 Complete package rated for installation in a hazardous location (Class 1 Division 2, or
Class 1 Division 1)

Sauer Compressors USA custom engineers solutions for our customers. Please inquire
about options you may require which are not listed.

You might also like