BD-H5500

Blu-ray™ Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung
product.
To receive more complete service,
please register your product at
www.samsung.com/register

ENGLISH
 point, you should obtain a suitable safety Precautions
Safety Information approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to Important Safety Instructions
Warning
cutting off the plug, remove the fuse and
Read these operating instructions carefully
then safely dispose of the plug. Do not
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). before using the unit. Follow all the safety
connect the plug to a mains jack, as there
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE is a risk of shock hazard from the bared instructions listed below.
PERSONNEL. flexible cord. Keep these operating instructions handy
for future reference.
To disconnect the apparatus from the mains,
CAUTION the plug must be pulled out from the mains 1. Read these instructions.
socket, therefore the mains plug shall be
RISK OF ELECTRIC SHOCK 2. Keep these instructions.
DO NOT OPEN readily operable.
The product unit accompanying this 3. Heed all warnings.
This symbol indicates CAUTION: TO REDUCE THE RISK This symbol indicates important user manual is licenced under certain 4. Follow all instructions.
"dangerous voltage" inside the OF ELECTRIC SHOCK, DO NOT instructions accompanying the intellectual property rights of certain third
product that presents a risk REMOVE COVER (OR BACK). NO product. 5. Do not use this apparatus near water.
parties.
of electric shock or personal USER SERVICEABLE PARTS INSIDE. 6. Clean only with a dry cloth.
injury. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT 7. Do not block any ventilation openings.
This Compact Disc player is classified as a Install in accordance with the
Do not install this equipment in a confined This product satisfies CE regulations when CLASS 1 LASER product. Use of controls, manufacturer's instructions.
space such as a bookcase or similar unit. shielded cables and connectors are used adjustments or performance of procedures
to connect the unit to other equipment. 8. Do not install near any heat sources
other than those specified herein may such as radiators, heat registers,
WARNING To prevent electromagnetic interference
with electric appliances, such as radios result in hazardous radiation exposure. stoves, or other apparatus (including
To prevent damage which may result in fire and televisions, use shielded cables and CAUTION : AV receivers) that produce heat.
or electric shock hazard, do not expose connectors for connections. ●● CLASS 3B VISIBLE AND INVISIBLE LASER
9. Do not defeat the safety purpose of
this appliance to rain or moisture. IMPORTANT NOTE RADIATION WHEN OPEN. AVOID
the polarized or grounding-type plug.
EXPOSURE TO THE BEAM (IEC 60825-1)
CAUTION A polarized plug has two blades with
The mains lead on this equipment is ●● THIS PRODUCT UTILIZES A LASER.
one wider than the other. A grounding
supplied with a molded plug incorporating USE OF CONTROLS OR ADJUSTMENTS
Blu-ray Disc Player USES AN INVISIBLE type plug has two blades and a third
a fuse. The value of the fuse is indicated OR PERFORMANCE OF PROCEDURES
LASER BEAM WHICH CAN CAUSE grounding prong. The wide blade or
HAZARDOUS RADIATION EXPOSURE IF on the pin face of the plug. OTHER THAN THOSE SPECIFIED
If it requires replacing, a fuse approved to HEREIN MAY RESULT IN HAZARDOUS the third prong are provided for your
DIRECTED. BE SURE TO OPERATE Blu-ray
Disc Player CORRECTLY AS INSTRUCTED. BS1362 of the same rating must be used. RADIATION EXPOSURE. DO NOT OPEN safety. If the provided plug does not fit
Never use the plug with the fuse cover COVER AND DO NOT REPAIR YOURSELF. into your outlet, consult an electrician
CAUTION omitted if the cover is detachable. If a REFER SERVICING TO QUALIFIED for replacement of the obsolete outlet.
PERSONNEL.
THIS PRODUCT UTILIZES A LASER. USE replacement fuse cover is required, it must 10. Protect the power cord from being
CLASS 1 LASER PRODUCT
OF CONTROLS OR ADJUSTMENTS OR be of the same colour as the pin face of walked on or pinched particularly at
the plug. Replacement covers are available
KLASSE 1 LASER PRODUKT
PERFORMANCE OF PROCEDURES OTHER plugs, convenience receptacles, and
THAN THOSE SPECIFIED HEREIN MAY from your dealer. the point where it exits the apparatus.
RESULT IN HAZARDOUS RADIATION LUOKAN 1 LASER LAITE
If the fitted plug is not suitable for the
EXPOSURE. DO NOT OPEN COVERS power points in your house or the cable KLASS 1 LASER APPARAT 11. Only use attachments/accessories
AND DO NOT REPAIR YOURSELF. REFER
is not long enough to reach a power PRODUCTO LÁSER CLASE 1 specified by the manufacturer.
SERVICING TO QUALIFIED PERSONNEL.

2
12. Use only with the －－When cleaning, wipe gently from the Using the 3D function ●● As the video resolution in 3D play mode
cart, stand, tripod, inside to the outside of the disc. is fixed according to the resolution
bracket, or table of the original 3D video, you can
specified by the
●● Disc Storage IMPORTANT HEALTH AND SAFETY
manufacturer, `` Do not keep in direct sunlight. INFORMATION FOR 3D PICTURES. not change the resolution to your
or sold with the Read and understand the following safety preference.
`` Keep in a cool ventilated area.
apparatus. When information before using the 3D function. ●● Some functions such as BD Wise,
a cart is used, `` Keep in a clean protection jacket
●● Some viewers may experience screen size adjustment, and resolution
use caution when moving the cart/ and store vertically.
apparatus combination to avoid injury discomfort while viewing 3D TV such as adjustment may not operate properly in
from tip-over. dizziness, nausea, and headaches. 3D play mode.
Handling Cautions
13. Unplug this apparatus during lightning If you experience any such symptom, ●● You must use a high-speed HDMI cable
storms or when unused for long ●● Do not expose this apparatus to stop viewing 3D TV, remove the 3D for proper output of the 3D signal.
periods of time. Active Glasses, and rest. Stay at least three times the width of the
dripping or splashing. Do not put ●●
14. Refer all servicing to qualified service objects filled with liquids, such as vases ●● Watching 3D images for an extended screen from the TV when watching 3D
personnel. Servicing is required when on the apparatus. period of time may cause eye strain. If images. For example, if you have a 46-
the apparatus has been damaged in
any way, such as when the power- ●● To turn this apparatus off completely, you feel eye strain, stop viewing 3D TV, inch screen, stay 138 inches (11.5 feet)
supply cord or plug is damaged, liquid you must pull the power plug out of remove your 3D Active Glasses, and from the screen.
has been spilled or objects have fallen the wall socket. Consequently, the rest. ●● Place the 3D video screen at eye level
into the apparatus, the apparatus has power plug must be easily and readily ●● A responsible adult should frequently for the best 3D picture.
been exposed to rain or moisture, does accessible at all times.
not operate normally, or has been check on children who are using the 3D ●● When the player is connected to some
dropped. ●● Do not plug multiple electric devices function. 3D devices, the 3D effect may not
into the same wall socket. Overloading a If there are any reports of tired eyes, function properly.
socket can cause it to overheat, resulting headaches, dizziness, or nausea, have
Disc Storage & Management in a fire
●● This player does not convert 2D content
the child stop viewing 3D TV and rest. into 3D.
●● Before connecting other components to ●● Do not use the 3D Active Glasses
●● Holding Discs this player, be sure to turn them off.
●● "Blu-ray 3D" and "Blu-ray 3D" logo
for other purposes (Such as general are trademarks of the Blu-ray Disc
－－Fingerprints or scratches If you move your player suddenly
●●
eyeglasses, sunglasses, protective Association.
on a disc may reduce from a cold place to a warm place, goggles, etc.).
sound and picture condensation may occur on the ●● Do not use the 3D function or 3D
quality or cause skipping operating parts and lens and cause
Active Glasses while walking or moving Copyright
－－Avoid touching the surface of a disc abnormal disc playback. If this occurs,
unplug the player, wait for two hours, around. Using the 3D function or 3D
where data has been recorded.
and then connect the plug to the power Active Glasses while moving around may © 2014 Samsung Electronics Co.,Ltd.
－－Hold the disc by the edges so that cause you to bump into objects, trip,
fingerprints will not get on the outlet. Then, insert the disc, and try to All rights reserved; No part or whole of
play back again. and/or fall, and cause serious injury. this user's manual may be reproduced
surface. ●● If you want to enjoy 3D content,
●● If the product makes an abnormal noise or copied without the prior written
－－Do not stick paper or tape on the disc. connect a 3D device (3D compliant AV
or produces a burning smell or smoke, permission of Samsung Electronics Co.,Ltd.
●● Cleaning Discs turn off the power switch immediately receiver or TV) to the player's HDMI OUT
－－If you get fingerprints and disconnect the power plug from the port using a high-speed HDMI cable.
or dirt on a disc, clean wall outlet. Then, contact the nearest Put on 3D glasses before playing the 3D
it with a mild detergent customer service centre for technical content.
diluted in water and assistance. Do not use the product. ●● The player outputs 3D signals only

wipe with a soft cloth. Using the product as it is may cause a through HDMI cable connected to the
fire or an electric shock. HDMI OUT port.

3
Contents Getting Started
SAFETY INFORMATION System Settings..................................... 13 Before using the User Manual
Warning.................................................. 2 Language Settings................................ 14
Security Settings................................... 14 Disc Types and Contents your player can play
Precautions............................................. 2
Disc Storage & Management................... 3 General Settings................................... 14
Media Disc Type Details
Handling Cautions.................................. 3 Support Settings................................... 14
Blu-ray Disc
Using the 3D function............................. 3 MEDIA PLAY 3D Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.
Copyright................................................ 3 DVD-VIDEO
Playing a Commercially Recorded Disc... 15 VIDEO DVD-RW DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-
GETTING STARTED Playing Files on a USB Device................. 15 DVD-R R/+R that have been recorded and finalized, or a USB
DVD+RW storage media containing DivX, MKV or MP4 contents.
Before using the User Manual................. 4 Playing a Disc with User Recorded DVD+R
Logos of Discs the player can play............ 5 Content................................................ 16
CD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R
Accessories............................................. 6 Playing Content Located on Your PC or MUSIC DVD-RW/-R, or a USB storage media containing MP3 or WMA
DLNA Device through the Blu-ray BD-RE/-R contents.
Front Panel............................................. 7
Disc Player............................................ 16 CD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-
Rear Panel.............................................. 7 PHOTO DVD-RW/-R, RE/-R or a USB storage media containing JPEG
Controlling Video Playback.................... 17 BD-RE/-R contents.
Remote Control...................................... 7
Controlling Music Playback.................... 17
CONNECTIONS ✎✎ NOTES
Playing Photo Contents......................... 19 ■■ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
Connecting to a TV................................. 8
APPENDIX ■■ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Connecting to an Audio System.............. 8 ■■ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Connecting to a Network Router............. 9 Troubleshooting.................................... 19 ■■ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
Specifications........................................ 21 25 Mbps.
SETTINGS ■■ Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer
The Initial Settings Procedure.................. 9 to this if necessary.
Menu Navigation.................................... 9 ■■ When you play a BD-J title, loading may take longer than a normal title or some functions may perform
slowly.
Accessing the Settings Menu................. 10
Display Settings..................................... 10 Disc types your player cannot play
Audio Settings...................................... 11
●● HD DVD ●● DVD-RAM ●● DVD-RW (VR ●● 3.9 GB DVD-R for
Network Settings.................................. 12 ●● DVD-ROM/PD/ ●● Super Audio CD mode) Authoring.
MV, etc (except CD layer) ●● CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play
audio only, not
graphics.)

4
Region Code Logos of Discs the player can play ●● The bigger the image resolution, the longer the image takes to display.
●● This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from
Both players and discs are coded by region. commercial sites.
These regional codes must match for a ●● Your player only supports video with a frame rate under 30fps (frames per second).
disc to play. If the codes do not match, the ●● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD.
disc will not play.
(HUB is not supported.)
The Region Number for this player is
displayed on the rear panel of the player. Blu-ray Disc BD-LIVE ●● Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this
player.
Disc Region
●● If some USB devices require excessive power, they may be limited by the circuit safety device.
Area ●● If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall
Type Code
socket.

A
North America, Central 3D Blu-ray Disc DivX If the problem continues, contact the USB HDD manufacturer.
America, South
America, Korea, Japan, ●● SAMSUNG is not responsible for any data file damage or data loss.
Taiwan, Hong Kong ●● Your player does not support NTFS compressed files, sparse files, or encrypted files.
and South East Asia.
●● You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Europe, Greenland,

B
Blu-ray French territories, Video File Support
Disc Middle East, Africa, PAL broadcast System in U.K., France,
Australia and New Germany, etc. File Audio
Zealand. Container Video Codec Resolution
Extension Codec

C
India, China, Russia, Supported File Formats
Central and South DivX 3.11/4/5/6 MP3
Asia. Dolby Digital 1920x1080
Notes on the USB connection MP4v3
*.avi AVI DTS
The U.S., U.S.
1 territories and Canada
●● Your player supports USB storage media,
MP3 players, digital cameras, and USB H.264 BP/MP/HP
WMA
PCM 1920x1080
card readers.
Europe, Japan, the
The player does not support folder or
2 VC-1 AP MP3 1920x1080
●●
Middle East, Egypt, file names longer than 128 characters.
Africa, Greenland *.mkv MKV Dolby Digital
●● Some USB/External HDD/digital camera H.264 BP/MP/HP DTS 1920x1080
Taiwan, Korea, the devices may not be compatible with the
3 Philippines, Indonesia,
Hong Kong
●●
player.
Your player supports the FAT16, FAT32,
and NTFS file systems. *.wmv
WMV
VC-1 AP
WMA
1920x1080
DVD- (wmv9) 1920x1080
Mexico, South America, ●● Connect USB devices directly to the VC-1 SM
VIDEO
Central America, player’s USB port. Connecting through
4 Australia, New Zealand,
Pacific Islands, Caribbean
a USB cable may cause compatibility
problems. *.mp4 MP4
MP4 (mp4v)
AAC
1920x1080

●● Inserting more than one memory device H.264 BP/MP/HP 1920x1080

Russia, Eastern Europe, into a multi-card reader may cause the
5 India, North Korea,
Mongolia ●●
reader to operate improperly.
The player does not support the PTP
MPEG1
MP1, 2
1920x1080
protocol. *.mpg
PS MPEG2 Dolby Digital 1920x1080
*.mpeg
6 China
●● Do not disconnect a USB device during
a "loading" process. H.264 BP/MP/HP
DTS
1920x1080

5
●● Limitations Picture File Support
－－Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem. File Extension Type Resolution
－－Normal playback is not guaranteed if the file’s container information is wrong or the
file itself is corrupted. *.jpg
－－Files having a higher Bit rate/frame rate than standard may stutter during sound/video *.jpeg JPEG 15360x8640
playback. *.jpe
－－The Seek (skip) function is not available if the file’s index table is damaged.
*.png PNG 15360x8640
●● Video decoder
－－Supports up to H.264 Level 4.1 and AVCHD AVCHD (Advanced Video Codec High Definition)
－－Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
－－MPEG4 SP, ASP :
●● This player can play back AVCHD format discs. These discs are normally recorded and
Below 1280 x 720 : 60 frames max used in camcorders.
Above 1280 x 720 : 30 frames max ●● The AVCHD format is a high definition digital video camera format.
－－Does not support GMC 2 or higher ●● The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
●● Audio decoder
●● Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
－－Supports WMA 7, 8, 9 and STD that use "x.v.Color" format.
－－Does not support WMA sampling rate of 22050Hz mono. ●● "x.v.Color" is a trademark of Sony Corporation.
－－AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) ●● "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,
Max bit rate: 320kbps Ltd. and Sony Corporation.

„„ Supported DivX subtitle file formats ✎✎ NOTES

*.ttxt, *.smi, *.srt, *.sub, *.txt
■■ Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
✎✎ NOTES ■■ "x.v.Color" offers a wider colour range than normal DVD camcorder discs.
■■ Playback of some DivX, MKV or MP4 file may not be supported depending on
their video resolution and frame rate.
Accessories
Music File Support
Check for the supplied accessories shown below.
File Audio
Container Support Range
Extension Codec

*.mp3 MP3 MP3 -

AUDIO HOME SUBTITLE

* Sampling rates (in kHz) - 8, 11, 16, 22,

32, 44.1, 48
BONUS REPEAT REPEAT FULL
VIEW A-B SCREEN

*.wma WMA WMA

* Bit rates - All bit-rates from 5kbps to
355kbps Batteries for Remote
Control User Manual Remote Control
(AAA Size)

6
 Front Panel Remote Control
PLAY/PAUSE BUTTON Tour of the Remote Control

STOP BUTTON
Turn the player on and off. Turn the TV on and off.
After setup, allows you to set the input
OPEN/CLOSE BUTTON
source on your TV.
Press to open and close the disc tray. TV volume adjustment.

POWER BUTTON

Press numeric buttons to operate

options.

Use to enter the disc menu. Use to enter the popup menu/title menu.

Press to skip backwards or forwards. Press to search a disc backwards or

forwards.
Press to stop a disc. Press to pause a disc.
Press to play a disc. AUDIO HOME SUBTITLE
Press to move to the home menu.
USB HOST
Use to access various audio functions on Press to switch the Blu-ray Disc/DVD's
REMOTE CONTROL SENSOR a disc (Blu-ray Disc/DVD). subtitle language.
DISC TRAY
Press to use Tools menu. Use to display the playback information.

✎✎ NOTES Use to select menu items and change

■■ When the player displays the Blu-ray Disc menu, you cannot start the movie by menu values.
pressing the Play button on the player or the remote. To play the movie, you must Return to the previous menu. Press to exit the menu.
select Play Movie or Start in the disc menu, and then press the v button. These buttons are used both for menus
■■ You can perform software upgrades using the USB Host jack with a USB flash on the player and also several Blu-ray Disc
Press to see the full screen on a TV.
memory stick only. functions. BONUS
VIEW
REPEAT
A-B
REPEAT FULL
SCREEN
During Blu-ray or DVD disc playback, the
Press to use bonusview function.
Full screen button does not operate.
Allows you to repeat A-B disc. Allows you to repeat a title, chapter,
Rear Panel track or disc.

Installing batteries
●● Check if the batteries are drained.
●● Check if the remote sensor is blocked by obstacles.
●● Check if there is any fluorescent lighting nearby.
!! CAUTION
■■ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash
✎✎ NOTES ■■ Do not dispose of batteries in a fire.
■■ Do not short circuit, disassemble or overheat the
■■ If the remote does not operate batteries.
properly: ■■ Danger of explosion if battery is incorrectly replaced.
●● Check the polarity (+/–) of the batteries. Replace only with the same or equivalent type.
HDMI OUT LAN DIGITAL AUDIO OUT

7
Connections Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the methods
Connecting to a TV illustrated below.
－－Do not connect the power cord to the wall outlet until you have made all the other
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the connections.
product to the HDMI IN jack on your TV. －－When you change the connections, turn off all devices before you start.
－－Do not connect the power cord to the wall outlet until you have made all the other connections.
－－When you change the connections, turn off all devices before you start. Method 1 Connecting to an HDMI supported AV receiver

●● Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your receiver.
●● Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder

●● Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out
Audio jack on the product to the Digital Coaxial In jack of the receiver.
Video ●● Good quality
●● You will hear sound only through the front two speakers with Digital Output set to
PCM.

✎✎ NOTES
■■ If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
■■ An HDMI cable outputs digital video and audio, so you don't need to connect an
audio cable. Method 1 Method 2
■■ Depending on your TV, certain HDMI output resolutions may not work. Please Audio Audio
refer to the user manual of your TV.
■■ When you connect the player to your TV using the HDMI cable or to a new TV,
and then turn it on for the first time, the player automatically sets the HDMI
output resolution to the highest supported by the TV.
■■ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour
to Off in the menu.
■■ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a
High speed HDMI cable.
■■ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen.

8
 Connecting to a Network Router
Settings
You can connect your player to your network router using one of the methods illustrated
below. The Initial Settings Procedure ■■ If you want to use the Anynet+(HDMI-CEC)
To use the DLNA network functionality, you must connect your PC to your network as function to aid in the initial set up process,
shown in the illustrations. please follow the instructions below.
●● The Home screen will not appear 1) Connect the player to an Anynet+(HDMI-
Wired Network if you do not configure the initial CEC) compliant Samsung TV using HDMI Cable.
settings. 2) Set the Anynet+(HDMI-CEC) feature to On
●● The OSD (On Screen Display) may change in both the TV and the player.
in this player after you upgrade the 3) Set the TV to the Initial Settings Procedure.
software version.
●● The access steps may differ depending on ■■ If you leave the player in the stop mode
the menu you selected. for more than 5 minutes without using it,
a screen saver will appear on your TV. If
●● After the initial settings process is the player is left in the screen saver mode
Broadband modem complete, you can then operate the
(with integrated router) for more than 25 minutes, the power will
panel buttons and remote control. automatically turn off.
Broadband
service
After you have connected the player to
Or
your TV, turn on the TV and player. When
Menu Navigation
you turn on the player the first time, the
player's Initial Settings screen appears on AUDIO HOME SUBTITLE

Router
the TV. The Initial Setting procedure lets you
set the On Screen Display (OSD) and menu 1
languages, the aspect ratio (screen size),
the network type, and connect the player
to your network. 3
Broadband
service
✎✎ NOTES 2 4
Broadband ■■ The Home menu will not appear if you do
modem not configure the initial settings except as
BONUS REPEAT REPEAT FULL
noted below. VIEW A-B SCREEN

■■ If you press the BLUE (D) button during HOME Button : Press to move to
1 the Home menu.
network setup, you can access the Home
menu even if the network setup is not
✎✎ NOTES completed yet. 2
RETURN Button : Return to the
previous menu.
■■ Internet access to Samsung's software update server may not be allowed, depending on ■■ When you return to the Home menu, the
the router you use or your ISP's policy. For more information, contact your ISP (Internet full screen mode is cancelled automatically.
v (Enter) / DIRECTION Button :
Service Provider). ■■ If you want to display the Initial Setting Move the cursor or select an item.
■■ DSL users, please use a router to make a network connection. screen again to make changes, press the ■ 3
Activate the currently selected
button on the top panel of the player for item. Confirm a setting.
more than 5 seconds with no disc inserted.
This resets the player to its default settings. EXIT Button : Press to exit the
■■ After the initial settings process is complete. 4 current menu.
you can operate the HDMI-CEC function.

9
●● Home Menu Accessing the Settings Menu ■■ Depending on the content and the Resolution
5 1 position of the picture on your TV
To access the Settings menu and sub- screen, you may see vertical black Lets you set the output resolution of the
Play disc Photos Videos
menus, follow these steps: bars on the left side, right side, or HDMI video signal to Auto, 1080p, 1080i,
both sides. 720p or 576p/480p. The number indicates
2 1. Press the POWER button. the number of lines of video per frame. The
6 The Home Menu appears.
TV Aspect Ratio i and p indicate interlaced and progressive
No disc
2. Press the ▲▼◀▶ buttons to select scan, respectively. The more lines, the
Settings, and then press the v button. Depending on the type of television you higher the quality.
7 3 3. Press the ▲▼ buttons to select the have, you may want to adjust the screen
App 1 App 2 App 3 App 4 App 5 More Change Device Settings

desired submenu, and then press the size setting. Resolution according to the output
8 4 v button. mode
4. Press the ▲▼ buttons to select the ✎✎ NOTES
desired item, and then press the v ■■ Depending on the disc type, some
●● Blu-ray Disc/E-contents/Digital Contents
1 Selects Videos. button. aspect ratios may not be available. playback
2 Selects Music. 5. Press the EXIT button to exit the menu. ■■ If you select an aspect ratio and
option which is different than the HDMI / connected
3 Selects Settings. ✎✎ NOTES aspect ratio of your TV screen, the Output
■■ The access steps may differ
picture might appear to be distorted. HDMI Mode
4 Selects Change Device. depending on the menu you
selected. The OSD (On Screen BD Wise (Samsung TVs only)
5 Selects Photos. Display) may change in this player E-contents/
Blu-ray
after you upgrade the software Setup Digital
6 Selects Play disc. BD Wise is Samsung’s latest inter- Disc
version. contents
connectivity feature.
7 Selects applications.
When you connect a Samsung player and
Display Settings Resolution of
8 Selects More applications. a Samsung TV with BD Wise to each other BD Wise 1080p
via HDMI, and BD Wise is on in both the Blu-ray Disc
You can configure various display options player and TV, the player outputs video at Max. Max.
✎✎ NOTES such as the TV Aspect Ratio, Resolution, etc. the video resolution and frame rate of the Auto Resolution of Resolution of
■■ The Videos, Photos, and Music Blu-ray Disc/DVDs.
3D Settings TV input TV input
options require that you have
an appropriate disc inserted into ✎✎ NOTES 1080p@60F
Select whether to play a Blu-ray Disc with When BD Wise is on, the Resolution
the player or a USB flash device ■■
(Movie Frame : 1080p@60F 1080p@60F
3D contents in 3D Mode. setting automatically defaults to BD
attached to the player. Off)
Wise and BD Wise appears in the
✎✎ NOTES Resolution menu. Movie Frame :
1080p@24F 1080p@24F
■■ For some 3D discs, to stop a movie ■■ If the player is connected to a device that Auto (24 fps)
during 3D playback, press the 5 does not support BD Wise, you cannot use
button once. 1080i 1080i 1080i
the BD Wise function.
The movie stops and the 3D mode ■■ For proper operation of BD Wise, 720p 720p 720p
option is de-activated. set the BD Wise menu of both the
To change a 3D option selection player and the TV to On. 576p/480p 576p/480p 576p/480p
when you are playing a 3D movie,
press the 5 button once.
The Blu-ray menu appears. Press
the 5 button again, then select 3D
Settings in the Blu-ray menu.

10
●● DVD playback Movie Frame (24 fps) Digital Output Selection

Output HDMI / connected Setting the Movie Frame (24 fps) feature Bitstream Bitstream
to Auto allows you to adjust the player’s Bitstream
Setup PCM (Re-encoded (Re-encoded
Setup HDMI Mode HDMI output to 24 frames per second for (Unprocessed)
Dolby D)
DTS)
improved picture quality. HDMI supported
BD Wise 576i/480i You can enjoy the Movie Frame (24 fps) Connection
HDMI
Coaxial
HDMI
Coaxial
HDMI Receiver
AV receiver or
Receiver Receiver or Coaxial
Auto Max. Resolution of TV input feature only on a TV supporting this frame Coaxial
rate. You can select Movie Frame only PCM Up to PCM 2ch PCM PCM 2ch Re-encoded Re-encoded
1080p 1080p when the player is in the HDMI 1080p 7.1ch DTS Dolby Digital *
output resolution modes. Dolby Dolby Re-encoded Re-encoded
1080i 1080i Dolby Digital PCM 2ch PCM 2ch Digital Digital DTS Dolby Digital *
720p 720p Dolby
Dolby Digital PCM 2ch PCM 2ch Dolby Re-encoded Re-encoded
HDMI Colour Format Plus Digital Digital DTS Dolby Digital *
576p/480p 576p/480p Plus
Lets you set the colour space format for Audio Dolby Dolby Re-encoded Re-encoded
Stream Dolby TrueHD PCM 2ch PCM 2ch TrueHD Digital DTS Dolby Digital *
✎✎ NOTES HDMI output to match the capabilities of on Blu-ray Re-encoded Re-encoded
■■ If the TV you connected to the player the connected device (TV, monitor, etc). Disc DTS PCM 2ch PCM 2ch DTS DTS DTS Dolby Digital *
does not support Movie Frame or DTS-
the resolution you selected, the DTS-HD High
HDMI Deep Colour HD High Re-encoded Re-encoded
Resolution PCM 2ch PCM 2ch Resolution DTS
message "If no pictures are shown Audio DTS Dolby Digital *
after selecting ‘Yes’, please wait for Audio
15 seconds to return to the previous Lets you output video from the HDMI OUT DTS-HD
jack with Deep Colour. Deep Colour provides DTS-HD Re-encoded Re-encoded
resolution. Do you want to change Master Audio PCM 2ch PCM 2ch Master DTS DTS Dolby Digital *
the resolution?" appears. If you more accurate colour reproduction with greater Audio
select Yes, the TV’s screen will go colour depth. PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
blank for 15 seconds, and then the Audio
resolution will revert to the previous Stream on Dolby Digital PCM 2ch PCM 2ch Dolby Dolby Dolby Digital Dolby Digital
Digital Digital
resolution automatically. Progressive Mode DVD
■■ If the screen stays blank after you DTS PCM 2ch PCM 2ch DTS DTS DTS DTS
have changed the resolution, Lets you improve picture quality when
remove all discs, and then press and Decodes main Decodes main
viewing DVDs. feature audio feature audio
hold the ■ button on the top of the Outputs only main and BONUSVIEW and BONUSVIEW
player for more than 5 seconds. All Decodes main feature audio stream audio stream audio stream
Audio Settings feature audio and so that your AV
BONUSVIEW audio receiver can decode PCM audiointo
settings are restored to the factory Definition together together into
default. Follow the steps on the for Blu-ray Any stream together and
the audio bitstream. add Navigation PCM audio and
previous page to access each mode add Navigation
Disc into PCM audio You will not hear Sound Effects, Sound Effects,
and select the Display Setup that Digital Output and add Navigation BONUSVIEW audio
and Navigation Sound thenthe
re-encodes then re-encodes
your TV will support. Sound Effects. PCM the PCM audio
Effects.
■■ When the factory default settings Lets you select the digital audio output audio into DTS into Dolby Digital
are restored, all stored user BD data format that is suitable for your TV or AV bitstream bitstream
is deleted. Receiver. For more details, please refer to
The Blu-ray Disc must have the 24 ** If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
■■
the Digital Output Selection table below.
frame feature for the player to use the Blu-ray Discs may include three audio streams :
Movie Frame (24 fps) mode. －－Main Feature Audio : The audio soundtrack of the main feature.
－－ BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
－－ Navigation Sound Effects : When you choose a menu navigation selection, a Navigation Sound Effect
may sound. Navigation Sound Effects are different on each Blu-ray Disc.

11
✎✎ NOTES Dynamic Range Control Wired Network Settings 9. If the Network Function does not
■■ Be sure to select the correct Digital acquire the network values, go to the
Output or you will hear no sound or Lets you apply dynamic range control to 1. In the Home menu, press the ▲▼◀▶ directions for Manual Setup.
just loud noise. Dolby Digital, Dolby Digital Plus, and Dolby buttons to select Settings, and then
True HD audio. press the v button. Manual Network Setup
■■ If the HDMI device (AV receiver, TV)
●● Auto : Automatically controls the
is not compatible with compressed 2. Press the ▲▼ buttons to select Before you start manual network setup,
formats (Dolby Digital, DTS), the dynamic range of Dolby TrueHD audio, Network, and then press the v you need the network setting values.
audio signal outputs as PCM. based on information in the Dolby button.
TrueHD soundtrack. To get the network setting values, contact
■■ Regular DVDs do not have 3. Press the ▲▼ buttons to select Wired your ISP (Internet Service Provider) or your
Also turns dynamic range control on for
BONUSVIEW audio and Navigation Network Settings, and then press network administrator.
Sound Effects. Dolby Digital and Dolby Digital Plus.
the v button. The Wired Network
●● Off : Leaves the dynamic range
■■ Some Blu-ray Discs do not have Settings screen appears. To enter the Network Settings into your
uncompressed, letting you hear the original player, follow these steps:
BONUSVIEW audio and Navigation
sound. Settings
Sound Effects.
●● On : Turns dynamic range control on for Display
Wired Network Settings 1. In the Home menu, press the ▲▼◀▶
■■ If you play MPEG audio soundtracks, Audio Internet Protocol Setup : Auto \
buttons to select Settings, and then
all three Dolby formats. Quieter sounds IP Address : 0 0 0 0
the audio signal outputs as PCM Network
press the v button.
are made louder and the volume of loud
Subnet Mask : 0 0 0 0
System
regardless of your Digital Output Language
Gateway : 0 0 0 0
2. Press the ▲▼ buttons to select
selections (PCM or Bitstream). sounds is reduced. DNS
Security
: Auto

General
DNS Server : 0 0 0 0
Network, and then press the v
■■ If your TV is not compatible with Downmixing Mode Support > Move " Select ' Return button.
compressed multi-channel formats 3. Press the ▲▼ buttons to select Wired
(Dolby Digital, DTS), the player may Lets you select the multi-channel downmix Network Settings, and then press
output PCM 2ch downmixed audio method that is compatible with your stereo 4. In the Internet Protocol Setup field, the v button. The Wired Network
even though you selected Bitstream system. You can choose to have the player select Auto if it is not selected. (Press Settings screen appears.
(either Re-encoded or Unprocessed) downmix to normal stereo or to surround v to select Auto, and then press v.) 4. Select the Internet Protocol Setup field,
in the setup menu. compatible stereo. and then press the v button.
5. The Auto Function acquires and fills in
■■ If your TV is not compatible with the values for IP Address, Subnet Mask, 5. Press the ▲▼ buttons to select
PCM sampling rates over 48kHz, etc., automatically. Manual, and then press the v button.
Network Settings
the player may output 48kHz 6. Press the ▼ button to go to the first
downsampled PCM audio even ✎✎ NOTES entry field (IP Address).
though you set PCM Downsampling Please contact your ISP to find out if ■■ This process can take up to five
your IP address is static or dynamic. If it is 7. Use the number buttons on your
to Off. minutes.
dynamic - and most are - we recommend remote to enter numbers.
PCM Downsampling using the Auto procedure for network 6. After the Network Function has 8. When done with each field, use the ▶
setup. This is easiest and will work in the acquired the network values, press the button to move to the next field. You
Lets you choose to have 96KHz PCM majority of cases. If it is static, you must RETURN button. can also use the other arrow buttons
signals downsampled to 48KHz before use the manual set up procedure. to move up, down, and back.
7. Select Network Test, and then press
they are outputted to an amplifier. Choose Network setup directions start below. 9. Enter the IP Address, Subnet Mask,
On if your amplifier or receiver is not v to ensure the player has connected
and Gateway values in the same way.
compatible with a 96KHz signal. ✎✎ NOTES to your network.
10. Press the ▼ button to go to DNS.
■■ This unit can only be connected to a 8. When the Network Test is complete,
11. Press the ▼ button to go to the first
Network via a wired connection. press the RETURN twice to return to
DNS entry field.
the Main Menu.
12. Enter the numbers as above.

12
13. Press the RETURN button on your Using BD-LIVE™ To download DLNA software Anynet+ (HDMI-CEC)
remote control.
14. Run a Network Test to ensure the Once the player is connected to the 1. Go to Samsung.com Anynet+ is a convenient function that
player has connected to your network. network, you can enjoy various movie- offers linked operations with other
related service contents using a BD-LIVE 2. Click Support, enter your player’s Samsung players that have the Anynet+
compliant disc. product number in the field that feature.
Network Test appears, and then click Product. To operate this function, connect this
1. Attach a USB memory stick to the USB player to an Anynet+ Samsung TV with an
Use this menu item to check whether your 3. On the next screen, click Get
jack on the front of the player, and HDMI cable.
network connection is working or not. downloads under Downloads.
then check its remaining memory. The With Anynet+ on, you can operate this
memory device must have at least 1GB 4. Click Software on the next page. player using a Samsung TV remote control
Network Status of free space to accommodate the BD- and start disc playback simply by pressing
5. Click the icon in the DLNA line under
LIVE services. File to start the download. the PLAY ( ) button on the TV’s
Use to check whether a connection to
remote control.
a network and the Internet has been 2. Insert a Blu-ray Disc that supports BD- For more information, please see the TV
established. LIVE. user manual.
System Settings
3. Select an item from various BD-LIVE ✎✎ NOTES
Device Name service contents provided by the disc
Initial Settings ■■ This function is not available if the
manufacturer.
Device Name function allows you to change HDMI cable does not support CEC.
player's name by selecting from device name ✎✎ NOTES By using the Initial Settings function, you ■■ If your Samsung TV has an Anynet+
list box. ■■ The way you use BD-LIVE and can set the language, Network Settings, etc. logo, then it supports the Anynet+
For more information about the Initial function.
the provided contents may
BD-Live Internet Connection differ, depending on the disc Settings function, refer to the Initial ■■ Depending on your TV, certain
Settings section of this user manual (See HDMI output resolutions may not
manufacturer.
Set to allow or prohibit an Internet page 9). work.
connection when you use the BD-LIVE Please refer to the user manual of
The DLNA Function Quick Start your TV.
service.
DLNA lets you play music, video, and
■■ If you have Anynet+ turned on,
●● Allow (All) : The Internet connection is
You can turn on the power quickly by when you turn off the product,
allowed for all BD-LIVE contents. photo files located in your PC or NAS on disconnect, and then reconnect
decreasing the boot time.
●● Allow (Valid Only) : The Internet the player. the power cable, the product turns
connection is allowed only for BD-LIVE To use DLNA with your player, you must ✎✎ NOTES on automatically to re-establish
contents containing a valid certificate. the Anynet+ connection. After
connect the player to your network. ■■ If this function is set to On, Standby
●● Prohibit : No Internet connection is
(See page 12-13). power consumption will be about 15 seconds, it turns off again
allowed for any BD-LIVE content. automatically.
To use DLNA with your PC, you must install increased.
✎✎ NOTES DLNA software on your PC. ■■ Some Samsung TVs, when
What is a valid certificate? connected to this product using
■■
If you have NAS, you can use DLNA the Anynet+ function will, when
When the player uses BD-LIVE to without any additional software.
send the disc data and a request you turn them on, display a
to the server to certify the disc, the warning popup message saying no
server uses the transmitted data to connection has been found. Never-
check if the disc is valid and sends the-less, the Anynet+ connection is
the certificate back to the player. properly established and available
■■ The Internet connection may be to use.
restricted while you are using BD-
LIVE contents.

13
BD Data Management Security Settings Change PIN Support Settings
Enables you to manage the downloaded When you access this function for the Change the 4-digit password used to
contents you accessed through a Blu-ray first time, the PIN screen appears. Enter access security functions. Software Upgrade
disc that supports the BD-LIVE service and the default PIN - 0000 - using the number
stored on a flash drive. To change the PIN, follow these steps: The Software Upgrade menu allows
buttons. To change the PIN, use the
You can check the device’s information 1. Select Change PIN, and then press the you to upgrade the player’s software for
Change PIN function. Each time you
including the storage size, delete the BD performance improvements or additional
access the Security Settings hereafter, you v button. The Enter old PIN screen
data, or change the Flash memory device. must enter that four digit PIN. If you don’t appears. services.
change the PIN, continue using the default
✎✎ NOTES PIN.
2. Enter the old PIN. If you never changed By Online
the PIN, enter the default PIN: 0000.
■■ In the external memory mode, disc
The Enter new PIN screen appears. To upgrade By Online, follow these steps:
playback may be stopped if you
disconnect the USB device in the
BD Parental Rating 3. Enter the new PIN in the Enter new PIN 1. In the player’s menu, go to Settings >
middle of playback. Prevents playback of Blu-ray Discs with fields.
Support > Software Upgrade.
■■ Your player supports the FAT16, specific age ratings unless the 4 digit PIN is 4. Re-enter the new PIN in the Confirm
2. Select By Online, and then press the
FAT32, and NTFS file systems. We entered. new PIN fields. The "PIN is changed
successfully." message appears. v button. The Connecting to Server
recommend you use USB devices
message appears.
that support USB 2.0 protocol with DVD Parental Rating 5. Press the v button.
4 MB/sec or faster read/write speed. 3. A popup message will appear if an
■■ The Resume Play function may not This function works in conjunction with If you forget your password update is available.
work after you format the storage DVDs that have been assigned an age rating 4. If you select Yes, download process
device. or numeric rating that indicates the maturity 1. Remove any discs. started. (Never turn the player on
level of the content. These numbers help you during an upgrade.)
■■ The total memory available to BD control the types of DVDs that your family 2. Press and hold the ■ button on the
Data Management may differ, can watch. top panel for 5 seconds or more. 5. When the update is completed, the
depending on the conditions. All settings will revert to the factory player will restart automatically.
Select the rating level you want to set.
settings.
DivX® Video On Demand
For example, if you select Level 6, discs ✎✎ NOTES
rated above 6 - Level 7 and 8 - will not ✎✎ NOTES ■■ The upgrade is complete when the
play. When the factory default settings
View DivX® VOD Registration Codes to ■■
player turns off, and then turns on
purchase and play DivX® VOD contents. A larger number indicates more mature are restored, all the user stored BD again by itself.
content. data will be deleted.
When the DVD Parental Rating function is
■■ Never turn the player off or back
Language Settings on, you must enter the 4 digit PIN to play on manually during the update
General Settings process.
discs with restricted rating levels.
You can select the language you prefer for ■■ Samsung Electronics takes no legal
the On-Screen menu, disc menu, audio, Time Zone responsibility for player malfunction
and subtitles. caused by an unstable Internet
Lets you specify the time zone that is connection or consumer negligence
✎✎ NOTES applicable to your area. during a software upgrade.
■■ The selected language will only
■■ No disc should be in the product
appear if it is supported on the disc.
when you upgrade the software By
Online.

14
By USB
To upgrade by USB, follow these steps:
2. Use the ▲▼ buttons to select On, and
then press the v button. Media Play
If there is a new software version available,
1. Visit www.samsung.com/ the player notifies you with a popup Playing a Commercially Recorded 3. Use the ▲▼ buttons to select Photos,
bluraysupport. message. Videos or Music, and then press
Disc
2. Download the latest USB software 1. To upgrade the firmware, select Yes the v button. The Photos, Videos
upgrade zip archive to your computer. in the Pop-up. The player turns off & Music screen appears listing the
3. Unzip the zip archive to your computer. automatically, then restarts, and begins 1. Press the 8 button to open the disc content of the device. Depending on
You should have a single RUF file with the download. (Never turn the player tray. how the contents is arranged, you will
the same name as the zip file. on or off manually during an upgrade.) 2. Place a disc gently into the disc tray see either folders, individual files, or
4. Copy the RUF file to a USB flash drive. 2. The update progress popup appears. with the disc's label facing up. both.
3. When the update is complete, the
5. Make sure there is no disc in the player,
player turns off again automatically. 3. Press the 8 button to close the disc ✎✎ NOTES
and then insert the USB flash drive into
the USB port of the player. 4. When the update is completed, the tray. Playback starts automatically. ■■ Even though the player will display
player will restart automatically. folders for all content types, it will
6. In the player’s menu, go to Settings > only display files of the Content Type
Support > Software Upgrade. ✎✎ NOTES Playing Files on a USB Device you selected in Step 3. For example,
7. Select By USB. ■■ The upgrade is complete when the if you selected music, you will only
player turns off, and then turns on be able to see music files. You can
✎✎ NOTES again by itself. There are two methods you can use to change this selection by returning to
■■ No disc should be in the product ■■ Never turn the player off or on play or view multimedia files located on a the Photos, Videos & Music screen
when you upgrade the software manually during the update process. USB device through your player. and going to Step 3 in Method 2
using the USB Host jack. ■■ Samsung Electronics takes no legal
below.
■■ When the software upgrade is responsibility for player malfunction Method 1 4. If necessary, use the ▲▼▲▼◀▶
done, check the software details in caused by an unstable Internet buttons to select a folder, and then
the software Upgrade menu. connection or consumer negligence 1. Turn the player on. press the v button.
■■ Do not turn off the player during the during software upgrade.
2. Connect the USB device to the USB 5. Select a file to view or play, and then
software upgrade. It may cause the port on the front panel of the player.
player to malfunction. Contact Samsung The New Device Connected pop-up
press the v button.
■■ Software upgrades using the USB appears. 6. Press the RETURN button to exit a
Host jack must be performed with a Provides contact information for assistance
folder or the EXIT button to return to
USB flash memory stick only. with your player.
Play disc Photos Videos Music the Home screen.
Auto Upgrade Notification Terms of Service Agreement New device connected.
123
7. Go to pages 17~19 for instructions
Photos
that explain how to control playback of
If you have connected the player to your Lets you view the general disclaimer No disc
Videos videos, music, and pictures on a USB
network, and then set Auto Upgrade regarding third party contents and Music
device.
Notification on, the player automatically services. > Move " Enter ' Return

notifies you when a new software version App 1 App 2 App 3 App 4 App 5 More Change Device Settings

is available for the player. Reset

To set Auto Upgrade Notification on,
follow these steps: Returns all settings to their factory defaults ✎✎ NOTES
except for the network settings. ■■ If the pop-up does not appear, go to
1. Select Auto Upgrade Notification, and
Method 2.
then press the v button.

15
Method 2 6. Press the RETURN button to exit a 4. If necessary, use the ▲▼◀▶buttons to 4. Use the ◀▶ buttons to select the type
folder or the EXIT button to return to select a folder, and then press the v of content you want to view or play
1. Turn the player on. Home screen. button. - Videos, Photos, or Music - and then
7. Go to pages 17~19 for instructions 5. Use the ▲▼◀▶ buttons to select a file press the v button.
2. Connect the USB device to the USB
port on the front panel of the player. that explain how to control playback of to view or play, and then press the v ✎✎ NOTES
Select Change Device and then press videos, music, and pictures on a USB button. ■■ Even though the player will display
the ▲▼ button to select USB. Press the device. 6. Press the RETURN button one or more folders for all content types, it will
v button. ✎✎ NOTES times to exit a current screen, exit a only display files of the Content
■■ If you insert a disc when playing folder, or to return to the Home screen. Type you selected in Step 4. For
Play disc Photos Videos
Change Device
Music
a USB device, the device mode Press the EXIT button to return directly example, if you selected music, you
No Disc
changes to "Disc" automatically. to the Home Screen. will only be able to see music files.
123
7. Go to pages 17~19 for instructions You can change this selection by
a
No disc that explain how to control playback of returning to the Home screen and
Playing a Disc with User Recorded videos, music, and pictures on a disc. repeating Step 4.

App 1 App 2 App 3 App 4 App 5 More

Close
Change Device Settings
Content 5. A screen appears listing the contents
of the disc. Depending on how the
You can play multimedia files you have Playing Content Located on Your contents are arranged, you will see
3. Use the ▲▼◀▶ buttons to select recorded on Blu-ray, DVD, or CD discs. PC or DLNA Device through the either folders, individual files, or both.
Photos, Videos or Music on the Blu-ray Disc Player
1. Place a user recorded disc into the disc 6. If necessary, use the ▲▼◀▶buttons to
Home screen, and then press the v
tray with the disc’s label facing up, and select a folder, and then press the v
button. The Photos, Videos & Music then close the tray. PC Blu-ray Disc Player button.
screen appears listing the content of
2. Use the ◀▶ buttons to select the type 7. Use the ▲▼◀▶ buttons to select a file
the device. Depending on how the
of content you want to view or play to view or play, and then press the v
contents is arranged, you will see either - Videos, Photos, or Music - and then
folders, individual files, or both. press the v button.
Play back PC's button.
files

✎✎ NOTES ✎✎ NOTES 8. Press the RETURN button one or more

DLNA Connection
times to exit a current screen, exit a
■■ Even though the player will display ■■ Even though the player will display
folders for all content types, it will folder, or to return to the Home screen.
folders for all content types, it will
only display files of the Content Type 1. Connect the Blu-ray Disc Player, your Press the EXIT button to return directly
only display files of the Content
you selected in Step 3. For example, PC, and/or your DLNA compatible to the Home Screen.
if you selected music, you will only Type you selected in Step 2. For
example, if you selected music, you device to the same network. 9. Go to pages 17~19 for instructions
be able to see music files. You can
change this selection by returning to will only be able to see music files. 2. Follow the directions in the DLNA that explain how to control playback of
the Photos, Videos & Music screen You can change this selection by software Installation/Instruction videos, music, and pictures on a disc.
and repeating Step 3. returning to the Home screen and manual to set up devices and files for
4. If necessary, use the ▲▼◀▶ buttons repeating Step 2. playing or viewing.
to select a folder, and then press the 3. Select Change Device on the player's
3. A screen appears listing the contents
v button. Home screen, and then press the v
of the disc. Depending on how the
5. Use the ▲▼◀▶ buttons to select a file contents are arranged, you will see button. In the list of DLNA connected
to view or play, and then press the v either folders, individual files, or both. devices that appears, select your PC
button. or other DLNA compatible device, and
then press the v button.

16
 Controlling Video Playback In pause mode, press the Controlling Music Playback Repeat an Audio CD (CD-DA)/
button. MP3
You can control the playback of video Slow Motion 4 You can control the playback of music
Each time you press the
content located on a Blu-ray disc, DVD, Play located on a Blu-ray disc, DVD, CD, USB
4 button, the playback 1. During Playlist playback, press the
CD, USB device, or your computer. speed will change. device, or your computer.
TOOLS button.
Depending on the media, some of the
functions described in this manual may not In pause mode, press the Buttons on the Remote Control Playlist 1/6
button.
Step Motion 7
Tools
TRACK 001
be available. used for Music Playback
TRACK 001
Repeat Mode ? Off 05:57
\
Each time you press the Rip TRACK 002
During Blu-ray or DVD disc playback, the Play 04:27

7 button, a new frame

> Move < Adjust ' Return
TRACK 003
Full screen button does not operate. 04:07
appears. TRACK 004
03:41
+
Buttons on the Remote Control
00:08 / 05:57
TRACK 005
During playback, press 1
03:17
TRACK 006
used for Video Playback the 1 or 2 button. 03:35

Skip Motion Each time you press the CD " Pause c Select Tools ' Return

2 Play 1 or 2 button, the disc

moves to the previous or 4 2. Press the ◀▶ buttons to select Track,
next chapter or file.
2 All, Shuffle, or Off.
5
1 Using the disc menu, title menu, AUDIO HOME SUBTITLE
3. Press the v button.
3 6
AUDIO HOME SUBTITLE popup menu, and title list
Songs are played in the
NUMBER buttons (Audio CD (CD- Off order in which they
During playback, press
DISC MENU DA) only) : During Playlist playback, were recorded.
Playback related buttons this button to start the 1
button press the desired track number.
The player does not play sound in Search, disc menu function. The current song is
The selected track is played. ( ) Track
Slow or Step mode. repeated.
During playback, press
●● To return to normal speed playback,
TITLE MENU Skip : During playback, press the
this button to start the ( ) All All songs are repeated.
press the 6 button. button 2 1 or 2 button to move to the
BONUS REPEAT REPEAT FULL
title menu function. VIEW A-B SCREEN
BONUS REPEAT REPEAT FULL previous or next file of the playlist. Shuffle plays songs in
6 button VIEW
Starts playback.
A-B SCREEN
POPUP During playback, press ( ) Shuffle
random order.
MENU this button to start the 3 5 button : Stops a track.
5 button Stops playback.
button popup menu function. Fast Play (Audio CD (CD-DA) only)
7 button Pauses playback.
During playback, press the 3 or
During playback, press 4 button.
the 3 or 4 button. 4
Each time you press the 3 or 4
Fast Motion Each time you press button, the playback speed will
Play the 3 or 4 button, change.
the playback speed will
change. 5 Pause : Pauses a track.

6 button : Plays the currently

6
selected track.

17
Playlist ✎✎ NOTES 6. If you want to cancel ripping, press the ✎✎ NOTES
■■ You can create a playlist with up to v button and then select Yes. Select ■■ Even though the player will display
1. To move to the Music List, press the 5 99 tracks on Audio CDs (CD-DA). No to continue ripping. folders for all content types, it will
or RETURN button. ■■ If you remove all the tracks from 7. When ripping is complete, the "Ripping only display files of the Content Type
The Music List screen appears. a play list and then press the v is completed." message appears. you selected in Step 3. For example,
button, the player lists and plays all Press the v button to go back to the if you selected music, you will only
Music TRACK 001
the tracks on the disc. Playback screen. be able to see music files. You can
TRACK 001
TRACK 002
change this selection by returning to
02:38

TRACK 003
02:38
TRACK 004 ✎✎ NOTES the Photos, Videos & Music screen
02:38 02:38
Ripping ■■ This function may not be supported
TRACK 005
02:38
TRACK 006
02:38 and repeating Step 3.
TRACK 007 TRACK 008 by some discs.
02:38 02:38
Lets you copy audio files contents from 4. With the Playback screen displayed,
TRACK 009 TRACK 010 ■■ On the Ripping screen, you can also
02:38 02:38 data Disc to USB/HDD device. use the ▲▼◀▶ buttons to select the
choose Select All and Deselect All.
CD a Change Device c Select Tools ( ) Jump to Page ' Return
1. Open the disc tray. Place the audio Videos, Photos, or Music, and then
(CDDA) disc on the tray, and close the -- Use Select All to select all tracks. press the YELLOW (C) button. A check
This cancels your individual track appears to the left of the desired item.
2. Press the ▲▼◀▶ buttons to move tray. Insert a USB device into the USB
selections.
to a desired track, and then press the jack on the front of the product. 5. Repeat Step 4 to select and check
YELLOW (C) button. A check appears 2. In Stop mode, press the ▲▼◀▶
-- Use Deselect All to deselect all additional desired item.
on the track. selected tracks at once.
buttons to move to a desired track, and 6. To remove the desired item from the
Repeat this procedure to select then press the YELLOW (C) button. A
Disc Copy to USB list, press the YELLOW (C) button
additional tracks. check appears on the track. again.
3. To remove a track from the list, move Repeat this procedure to select The check on the desired item is
to the track, and then press the additional tracks. Lets you copy video/photo/music contents
removed.
YELLOW (C) button again. from data Disc to USB/HDD device.
3. To remove a track from the list, move 7. When done, press the TOOLS button
The check on the track is cancelled. to the track, and then press the 1. Open the disc tray. Place the data disc
and then select the Copy to USB using
4. When done, press the v button. YELLOW (C) button again. on the tray, and close the tray. Insert
the ▲▼ buttons. and then press the
The tracks you selected are displayed The check on the track is cancelled. a USB device into the USB jack on the
front of the product. The new device v button. The Copy to USB pop-up
on the right side of the screen. The 4. When done, press the TOOLS button appears.
player plays the first track. pop-up appears.
and then select the Rip using the 8. Use the ▲▼ buttons to select the
5. To change the play list, press the ■ ▲▼ buttons. and then press the v 2. Press the ▲ button, and then press the
device to store the copied files, and
button or RETURN button to return to button. The Rip pop-up appears. ◀▶ buttons to select Blu-ray, DVD or CD.
then press the v button.
the Music List. Repeat Steps 2, 3, and 3. Use the ▲▼ buttons to select Photos,
4.
5. Use the ▲▼ buttons to select the
Videos or Music, and then press ✎✎ NOTES
device to store the ripped files, and Do not disconnect the device while
6. To cancel the play list and return to then press the v button. the v button. The Photos, Videos ■■

& Music screen appears listing the copying is in progress.

the Home screen, press the RETURN or
EXIT button.
✎✎ NOTES content of the device. Depending on 9. If you want to cancel copying, press
■■ Do not disconnect the device while how the contents is arranged, you will the v button and then select Yes.
ripping is in progress. see either folders, individual files, or Select No to continue copying.
both.

18
10. When copying is complete, the
"Copying is completed." message
appears. Press the v button to go
✎✎ NOTES
■■ Depending on the disc or storage Appendix
device, the Tools menu may differ.
back to the Playback screen.
■■ To enable the background music Troubleshooting
✎✎ NOTES function, the photo file must be
■■ This function may not be supported by in the same storage media as the Before requesting service, please try the following solutions.
some discs. music file.
■■ On the Copying screen, you can also However, the sound quality can be PROBLEM SOLUTION
choose Select All and Deselect All. affected by the bit rate of the MP3
-- Use Select All to select all item. file, the size of the photo, and the No operation can be ●● Check the batteries in the remote control. They may need replacing.
This cancels your individual item encoding method. performed with the ●● Operate the remote control at a distance of no more than 6.1m from
selections. remote control. the player.
You can't enlarge the subtitle and
-- Use Deselect all to deselect all
■■

PG graphic in the full screen mode. ●● Remove batteries and hold down one or more buttons for several
selected item at once. minutes to drain the microprocessor inside the remote control to reset
it. Reinstall batteries and try to operate the remote control again.
Playing Photo Contents
Disc does not play. ●● Ensure that the disc is installed with the label side facing up.
You can control the playback of photo ●● Check the region number of the Blu-ray Disc/DVD.
content located on a Blu-ray disc, DVD, CD,
USB device, or your computer.
Disc Menu does not ●● Ensure that the disc has disc menus.
Using the Tools Menu appear.

During playback, press the TOOLS button. The prohibition ●● This message appears when an invalid button is pressed.
message appears on ●● The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
Start Slide the screen. You’ve requested a title or chapter number or search time that is out of
Select to start or stop the ●●

Show/ Stop range.

slide show.
Slide Show
Slide Show Select to set a slide show's Play mode differs from the ●● Some of the functions selected in the Setup Menu may not work
Speed speed. Setup Menu selection. properly if the disc is not encoded with the corresponding function.

Select to listen to music The screen ratio The Screen Ratio is fixed on your Blu-ray Disc/DVD.
Background ●●

while viewing a slide cannot be changed. This is not a problem with the player.
Music ●●

show.
Select to enlarge the No audio. ●● Make sure you have selected the correct Digital Output in the Audio
Zoom current picture. (Enlarge Options Menu.
up to 4 times)
The screen is blank. ●● If the HDMI output is set to a resolution your TV cannot support (for
Select to rotate the picture. example, 1080p), you may not see a picture on your TV.
(This will rotate the picture Press the ■ button (on top panel) for more than 5 seconds with no
Rotate ●●

either clockwise or counter disc inside. All settings will revert to the factory settings.
clockwise.) ●● When the factory default settings are restored, all stored user BD
Information Shows the picture information. data is deleted.

19
 PROBLEM SOLUTION PROBLEM SOLUTION
Forgot password ●● Press the ■ button (on top panel) for more than 5 seconds BD-LIVE
with no disc inside. All settings including the password will
revert to the factory settings. I cannot connect to ●● Check whether the network connection is working or not
Don’t use this unless absolutely necessary. the BD-LIVE server. by using the Network Status menu.
●● When the factory default settings are restored, all stored user ●● Check whether the USB memory device is connected to
BD data is deleted. the player.
●● The memory device must have at least 1GB of free space
The picture is noisy or ●● Make sure that the disc is not dirty or scratched.
to accommodate the BD-LIVE service.
distorted ●● Clean the disc. You can check the available size in BD Data Management.
No HDMI output. ●● Check the connection between the TV and the HDMI jack ●● Check whether the BD-LIVE Internet Connection menu is
of the player. set to Allow(All).
●● Check if your TV supports 576p/480p, 720p, 1080i, or ●● If all above fails, contact the contents provider or update
1080p HDMI input resolutions. the player to the latest firmware.
Abnormal HDMI ●● If random noise appears on the screen, it means that TV
output screen. does not support HDCP (High-bandwidth Digital Content When using the BD- ●● The memory device must have at least 1GB of free space
Protection). LIVE service, an error to accommodate the BD-LIVE service.
occurs. You can check the available size in BD Data Management.
If you experience ●● Go to the contents and find the section of the user
other problems. manual that contains the explanations regarding the
current problem, and follow the procedure once again.
✎✎ NOTES
■■ When the factory default settings are restored, all stored user BD data is deleted.
●● If the problem still cannot be solved, please contact your
nearest Samsung authorised service centre.
Repairs
DLNA function
I can see folders shared ●● DLNAs shows only files corresponding to the Image, If you contact us to repair your player, an administration fee may be charged if either:
through DLNA, but I Music, and Movie categories. Files that do not correspond 1. An engineer is called out to your home at your request and there is no defect in the
cannot see the files. to these categories are not displayed. product.
2. You bring the unit to a repair centre and there is no defect in the product.
Video is played ●● Check if the network is stable.
intermittently. ●● Check if the network cable is properly connected and if We will provide you with the amount of the administration fee before we make a home
the network is overloaded. visit or begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at
DLNA connection ●● The IP address under the same subnetwork should be
www.samsung.com, or contact Samsung Customer Care before seeking to repair your
between Player and unique. If they are not, IP interference can cause this
player.
PC is unstable. phenomenon.
●● Check if you have a firewall enabled.
If so, disable the firewall function.

20
 Specifications Compliance and Compatibility Notice
NOT ALL discs are compatible
●● Subject to the restrictions described below and those noted throughout this Manual,
Weight 1.2 Kg
including the Disc Type and Characteristics section of this user manual, disc types that can
Dimensions 360 (W) X 196 (D) X 39 (H) mm be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
General ●● Discs other than those listed above cannot be and are not intended to be played by this
Operating Temperature
+5°C to +35°C player. Some of the discs listed above may not play due to one or more reasons provided
Range
below.
●● Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
Operating Humidity Range 10 % to 75 % DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
Type A USB 2.0 disc compatibility and player operation issues with new and existing format discs are
USB possible because:
DC output 5V 0.5A Max. －－Blu-ray is a new and evolving format and this player may not operate all features of Blu-
ray Discs because some features may be optional, additional features may have been
2D : 1080p, 1080i, 720p, 576p/480p added to the Blu-ray Disc format after the production of this player, and certain available
Video features may be subject to delayed availability;
3D : 1080p, 720p
HDMI －－not all new and existing disc format versions are supported by this player;
Audio PCM, Bitstream －－new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
Audio －－some discs are produced in a manner that allows specific or limited operation or restricts
Digital Audio Output Coaxial features during playback;
Output
－－some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
Network Ethernet 100BASE - TX Terminal CD-RW/-R logos may still be non-standardized discs;
－－some discs may not be played depending on their physical state or recording conditions;
－－Network speeds equal to or below 10Mbps are not supported. －－problems and errors can occur during the creation of Blu-ray Disc or DVD software
－－Design and specifications are subject to change without prior notice. and/or the manufacture of discs;
－－this player operates differently than a standard DVD player or other AV equipment;
－－For the power supply and power consumption, refer to the label attached to the
and/or
player.
－－for reasons noted throughout this user manual and for other reason(s) discovered and
－－Weight and dimensions are approximate.
posted by SAMSUNG customer care centre.
●● If you encounter disc compatibility or player operation problems, please contact SAMSUNG

customer care centre.

You may also contact SAMSUNG customer care centre for possible updates on this player.
●● For additional information on playback restrictions and disc compatibility, refer to the

Precautions, Before Reading the user manual, Disc Types and Characteristics, and
Before Playing sections of this user manual.

21
●● For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT Network Service Disclaimer
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE All content and services accessible through this device belong to third parties and are
OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER protected by copyright, patent, trademark and/or other intellectual property laws. Such
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE content and services are provided solely for your personal noncommercial use. You may
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE not use any content or services in a manner that has not been authorised by the content
CONTACT OUR CUSTOMER SERVICE CENTER. owner or service provider. Without limiting the foregoing, unless expressly authorised by
the applicable content owner or service provider, you may not modify, copy, republish,
Copy Protection upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in
any manner or medium any content or services displayed through this device.
●● Because AACS (Advanced Access Content System) is approved as the content THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
protection system for the Blu-ray Disc format, similar to use of CSS (Content Scramble WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
System) for the DVD format, certain restrictions are imposed on playback, analogue FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
signal output, etc., of AACS protected contents. INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
The operation of this product and restrictions on this product may vary depending FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY,
on your time of purchase as those restrictions may be adopted and/or changed by VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE
AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES,
additionally used as content protection systems for the Blu-ray Disc format, which INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT
imposes certain restrictions including playback restrictions for BD-ROM Mark and/or OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT
BD+, or this product, please contact SAMSUNG customer care centre. OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT
●● Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
should only connect your Player directly to your TV, not to a VCR. Connecting to a ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs. Third party services may be terminated or interrupted at any time, and Samsung makes
●● Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised no representation or warranty that any content or service will remain available for
recording, use, display, distribution, or revision of television programs, videotapes, any period of time. Content and services are transmitted by third parties by means
Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal of networks and transmission facilities over which Samsung has no control. Without
liability. limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility
●● Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised or liability for any interruption or suspension of any content or service made available
copies of some commercially-produced film and videos and their soundtracks. through this device.
When a prohibited use of an unauthorised copy is detected, a message will be Samsung is neither responsible nor liable for customer service related to the content and
displayed and playback or copying will be interrupted. More information about services. Any question or request for service relating to the content or services should be
Cinavia technology is provided at the Cinavia Online Consumer Information Centre made directly to the respective content and service providers.
at http://www.cinavia.com. To request additional information about Cinavia by mail,
send a postcard with your mailing address to: Cinavia Consumer Information Centre,
P.O. Box 86851, San Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance
Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright
2004-2013 Verance Corporation. All rights reserved by Verance. Reverse engineering
or disassembly is prohibited.

22
Licence ●● Oracle and Java are registered trademarks of Oracle and/or its
affiliates. Other names may be trademarks of their respective
●● Manufactured under licence from Dolby Laboratories. Dolby and the owners.
double-D symbol are trademarks of Dolby Laboratories.

●● For DTS patents, see http://patents.dts.com. Manufactured under ●● Open Source Licence Notice
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the －－In the case of using open source software, Open Source Licences are available on
Symbol together are registered trademarks, and DTS 2.0+Digital Out is the product menu.
a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
2.0+Digital Out ●● Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
●● DivX
－－ABOUT DIVX VIDEO: DivX® is a digital video format created by ●● DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX service marks, or certification marks of the Digital Living
Certified® device that has passed rigorous testing to verify that it plays DivX video. Network Alliance.
Visit divx.com for more information and software tools to convert your files into
DivX videos.
－－ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
－－DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;
7,515,710; 7,519,274.

●● The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.

23
 UNITED KINGDOM EIRE

This Samsung product is warranted for the period of twelve (12) months from the work will not be covered by this warranty.
original date of purchase, against defective materials and workmanship. In the event 4. This product is not considered to be defective in materials nor workmanship by
that warranty service is required, you should return the product to the retailer from reason that it requires adaptation in order to conform to national or local technical
whom it was purchased. or safety standards in force in any Country other than the one for which the
However, Samsung Authorised Dealers and Authorised Service Centres in other EC product was originally designed and manufactured. This warranty will not cover,
Countries will comply with the warranty on the terms issued to purchasers in the and no re-imbursement will be made for such adaptation nor any damage which
country concerned. may result.
In case of difficulty, details of our Authorised Service Centres are available from:
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts due to
Samsung Electronics U.K. Ltd. Customer Care normal wear and tear.
Centre PO Box 479 GATESHEAD NE9 9BJ
b) Cost relating to transport, removal or installation of the product.
United Kingdom
c) Misuse, including the faiure to use this product for its normal purposes or
United Kingdom incorrect installation.
Tel : 0330 SAMSUNG (7267864)
Fax: 03307260001 d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public
www.samsung.com Disturbances, incorrect mains voltage, improper ventilation or any other cause
beyond the control of Samsung.
Eire
6. This warranty is valid for any person who legally acquired possession of the
Tel : 0818 717100
product during the
Fax: +44 117 915 6736
warranty period.
www.samsung.com
7.The consumers statutory rights in any applicable national legislation whether
against the retailer arising from the purchase contract or otherwise are not
■■ WARRANTY CONDITIONS affected by this warranty. Unless there is national legislation to the contrary, the
rights under this warranty are the consumers sole rights and Samsung, its
1. The warranty is only valid if, when warranty service is required, the warranty card
subsidiaries and distributors shall not be liable for indirect or consequential loss or
is fully and properly completed and is presented with the original invoice or sales
any damage to records, compact discs, videos or audio taper or any other related
slip or confirmation, and the serial number on the product has not been defaced.
equipment or material.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of
the product or the defective part.
SAMSUNG ELECTRONICS (U.K.) LTD.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or
Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers
and, any such repair work and damage to the products caused by such repair
 Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
Contact SAMSUNG WORLD WIDE
in this product should not be disposed of with other household waste at the
If you have any questions or comments relating to Samsung products, please contact end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
the SAMSUNG customer care centre. indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66.
Area Contact Centre  Web Site If batteries are not properly disposed of, these substances can cause harm to
AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com
human health or the environment.
www.samsung.com/be (Dutch)
BELGIUM 02-201-24-18
www.samsung.com/be_fr (French) To protect natural resources and to promote material reuse, please separate
BOSNIA 051 331 999 www.samsung.com batteries from other types of waste and recycle them through your local, free
BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg
battery return system.
CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr
CZECH 800 - SAMSUNG (800-726786) www.samsung.com
DENMARK 70 70 19 70 www.samsung.com
FINLAND 030-6227 515 www.samsung.com Correct Disposal of This Product
FRANCE 01 48 63 00 00 www.samsung.com/fr
(Waste Electrical & Electronic Equipment)
0180 6 SAMSUNG bzw.
0180 6 7267864*
GERMANY
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk
www.samsung.com (Applicable in the European Union and other European countries with
max. 0,60 €/Anruf) separate collection systems)
CYPRUS 8009 4000 only from landline
www.samsung.com/gr
This marking on the product, accessories or literature indicates that the
80111-SAMSUNG (80111 726 7864) only from land line
GREECE
(+30) 210 6897691 from mobile and land line product and its electronic accessories (e.g. charger, headset, USB cable)
HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com/hu should not be disposed of with other household waste at the end of their
ITALIA 800-SAMSUNG(726-7864) www.samsung.com working life.
LUXEMBURG 261 03 710 www.samsung.com To prevent possible harm to the environment or human health from
MONTENEGRO 020 405 888 www.samsung.com uncontrolled waste disposal, please separate these items from other types of
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com waste and recycle them responsibly to promote the sustainable reuse of
NORWAY 815 56480 www.samsung.com
material resources.
0 801-172-678* lub +48 22 607-93-33 **
POLAND
* (całkowity koszt połączenia jak za 1 impuls według
www.samsung.com/pl Household users should contact either the retailer where they purchased this
taryfy operatora) product, or their local government office, for details of where and how they
** (koszt połączenia według taryfy operatora)
PORTUGAL 808 20-SAMSUNG(808 20 7267) www.samsung.com
can take these items for environmentally safe recycling.
ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE No. www.samsung.com/ro Business users should contact their supplier and check the terms and
SERBIA 011 321 6899 www.samsung.com/rs conditions of the purchase contract.
SLOVAKIA 0800 - SAMSUNG(0800-726 786) www.samsung.com This product and its electronic accessories should not be mixed with other
SPAIN 902172678 www.samsung.com
commercial wastes for disposal.
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com
www.samsung.com/ch (German)
SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min)
www.samsung.com/ch_fr (French)
U.K 0330 SAMSUNG (7267864) www.samsung.com
EIRE 0818 717100 www.samsung.com
LITHUANIA 8-800-77777 www.samsung.com/lt
LATVIA 8000-7267 www.samsung.com/lv
ESTONIA 800-7267 www.samsung.com/ee
AK68-02450A-00
AK68-02450A-00