580SN BACKHOE LOADER

TIER 4 FINAL CERTIFIED

ENGINE DRIVETRAIN (cont.) OPERATOR ENVIRONMENT

Model FPT F5BFL413B Specifications below apply to both Power ROPS / FOPS certified protective canopy;
Emissions Certification Tier 4 Final Shuttle and Powershift S-Type transmission Anti-vandalism cover for dash – w/ canopy only;
unless otherwise indicated. Rear fenders extensions; Coat hook w/ garment
Type Diesel 4-stroke, turbocharged strap; Interior rearview mirror, convex
Gear ratios Forward/ Reverse
Cylinders 4 1st 5.603 / 4.643 3.54 in (90 mm) wide x 10.83 in (275 mm) high;
Bore/Stroke 3.9 x 4.33 in 2nd 3.481 / 2.884 Non-suspension seat – 180° swivel – Vinyl; 2
(99 x 110 mm) 3rd 1.584 / 1.313 in (50 mm) retractable seat belt; Cup holder/
4th 0.793 / 0.657* storage tray mounted on left-hand fender;
Displacement 207 in3 (3.4 L)
Right-hand storage compartment w/ lid.
Fuel injection Direct, high pressure Travel speeds Forward Reverse
mph (kph) mph (kph) Gauges:
common rail – HPCR
Engine water temperature; Converter oil
Fuel Diesel 1st 3.8 (6.1) 4.5 (7.3) temperature; Fuel; Tachometer/hourmeter;
2nd 6.0 (9.7) 7.2 (11.6) DEF level.
Engine speeds* RPM
3rd 12.8 (20.6) 15.4 (24.7)
Rated speed – full load 2200 Warning lights:
4th 24.0 (38.6) 28.8 (46.3)*
Low idle 900 – 1000 Air cleaner restriction; Alternator; A/C high
High idle – no load 2330 – 2430 NOTE: *4R not available on Powershift S-Type.
pressure; Cold start; Engine oil pressure;
Horsepower @ 2200 RPM: Transmission – optional: Hydraulic oil filter bypass; Parking brake
Gross 97 hp (72 kW) Powershift H-Type, 4F-3R hydraulic clutch engagement; Low fuel; Water in fuel;
Net 95 hp (71 kW) shifting w/ auto function Low DEF.
Maximum torque @ 1400 RPM: Gear ratios Forward/ Reverse Audible alarms w/ diagnostics:
Gross 334 lb·ft (453 N·m) 1st 5.533 / 4.549 Coolant temperature; Engine oil pressure;
Net 333 lb·ft (452 N·m) 2nd 3.359 / 2.762 Parking brake engagement; Converter
3rd 1.533 / 1.260 temperature; Shuttle engagement/seat
Torque rise at rated speed 45% + / - 5% 4th 0.811 / — position; Backup alarm; Low DEF fluid.
Radiator: Travel speeds Forward Reverse
Core size area 486 in2 (3 145 cm2) Horn Dual switched front and rear
mph (kph) mph (kph)
Rows of tubes 4
1st 3.9 (6.2) 4.6 (7.4)
39° fan: 2nd 6.3 (10.1) 7.5 (12.1) OPERATING WEIGHT
Style 9 blade suction 3rd 13.3 (21.4) 16.0 (25.7) Configuration 1 – SAE Transport:
Diameter 19.65 in (500 mm) 4th 23.6 (38.0) —
Ratio** 1.4:1 No Operator, GP Loader Bucket, Cab, AC,
NOTE: Travel speeds at 2312 engine RPM specified: Small Front Counter Weight, 2WD, Full of Fuel,
Pump operating angle ratings: w/ 19.5 L x 24 tires. SAE Carry T4 Final Engine, Pilot Controls,
Side to side Rated 35° Speeds decrease w/ 17.5 L x 24 rear tires.
11 L – 16 @ 52 psi front tires, 17.5 L – 24 @
Fore and aft Rated 35° Torque converter ratio 2.4 30 psi rear tires. 17,269 lb (7 883 kg)
Oil filtration Replaceable,
full flow cartridge Differential lock On-the-go Configuration 2 – SAE Transport:
push-button activation No Operator, 4:1 Loader Bucket, Ehoe, Cab, big
NOTE: *Engine speeds w/ standard transmission.
Meets federal emission regulations. Front 4WD/ Rear axle: front counter weight, Full of Fuel, SAE Carry T4
**Viscous fan. Differential ratio 2.0 / 2.5 Final Engine, Pilot Controls, Galaxy 12 x 16.5 @
Planetary hub ratio 6.0 / 6.4 50 psi front tires, Solideal 19.5 L – 24 @
Total reduction ratio 12.0 / 16.0 30 psi rear tires. 19,067 lb (8 649 kg)
DRIVETRAIN
Service brakes: Add-on weights:
Transmission – standard: Individually applied, power assisted,
Powershift S-Type, 4F-3R power shuttle, Cab-over canopy 309 lb (140 kg)
hydraulically actuated, maintenance-free,
synchromesh transmission w/ hydraulic self-adjusting, outboard mounted, wet disc, Fabricated stabilizer pads 141 lb (64 kg)
gear shifting 2 per side. Counterweights 700 lb (318 kg)
Transmission – optional: Total disc area 384 in2 (0.25 m2) Extendahoe® 286 lb (130 kg)
4F-4R Power Shuttle Synchromesh Parking brakes Trans Mounted 4WD w/ driveshaft guard 283 lb (128 kg)
transmission manual gear shift, fully spring-applied,
synchronized hydraulic release – SAHR

ELECTRICAL
Voltage 12 Volts, negative ground
Alternator 160 amp
Battery 850 cold-cranking amps
Opt. batteries (2) 850 cold-cranking amps
Power plugs (2) 30 amps total

Page 1 of 7
HYDRAULICS SERVICE CAPACITIES OTHER SPECIFICATIONS (cont.)
Pump: Fuel tank 35.0 gal (132.0 L) Turning radius*: Curb to Curb
Bosch Rexroth Series 31 Variable DEF tank 3.6 gal (13.5 L) 2WD:
Displacement Axial Piston Pump Brakes on 10 ft 8 in (3.24 m)
Hydraulic system:
Main relief pressure: Total 125 qt (118 L) Brakes off 12 ft 4 in (3.76 m)
Standard 3,450 + / - 50 psi w/ Extendahoe® 131 qt (123.6 L) 4WD – engaged:
(238 + / - 3.5 bar) Reservoir w/ filter 53 qt (50.5 L) Brakes on 11 ft 4 in (3.45 m)
Power Lift 3,625 + / - 50 psi Reservoir w/o filter 55 qt (52.4 L) Brakes off 13 ft 10 in (4.21 m)
(250 + / - 3.5 bar) Transmission – total system: 4WD – disengaged:
Filtration: 2WD Standard 18 qt (17.0 L) Brakes on 11 ft 0 in (3.36 m)
7-micron, full flow replaceable cartridge on 2WD Powershift S-Type 23 qt (21.7 L) Brakes off 12 ft 3 in (3.72 m)
return line, condition indicator light for filter. 4WD Standard 21 qt (19.4 L) Backhoe:
Oil cooler Heavy-duty 4WD Powershift S-Type 22 qt (20.7 L) Over center design, Fabricated “S” boom;
4WD Powershift H-Type 19 qt (18.0 L) Pro Control System; Dipperstick integrated
Loader flow @ rated engine RPM:
41 gpm @ 2,340 psi Front axle: serrated gripper teeth; Case mechanical
(155.2 L/ min @ 161 bar) 4WD Differential 8.1 qt (7.7 L) coupler.
4WD Planetaries – each 0.5 qt (0.5 L) Backhoe bucket sizes:
Loader control valve w/ pilot or manual
backhoe controls: Rear axle: Width Weight Heaped
Two or three-spool closed center sectional Differential and planetaries 14.4 qt (13.6 L)
Universal Buckets
control valve. Single lever manual control for Engine oil w/ filter 8.5 qt (8.0 L)
lift and tilt functions. The three-spool valve 12 in 295 lb 3.40 ft3
Cooling system: (305 mm) (134 kg) (0.10 m3)
uses a proportional Electro-Hydraulic control w/ heater 19.0 qt (18.0 L)
for the auxiliary function. The lift lever has a w/o heater 18.3 qt (17.3 L) 18 in 356 lb 5.30 ft3
positive hold “Float” position and a “return- (457 mm) (162 kg) (0.15 m3)
to-dig” feature. Window washer reservoir 3.0 qt (2.8 L)
24 in 427 lb 7.70 ft3
Loader auxiliary hydraulics w/ proportional (610 mm) (194 kg) (0.22 m3)
thumb switch w/ detent on loader OTHER SPECIFICATIONS 30 in 489 lb 10.20 ft3
control handle: (762 mm) (222 kg) (0.29 m3)
Front tires:
0 to 41 gpm @ 2,340 psi
2WD 11.0 L x 16.0, 10-ply rating 36 in 552 lb 12.70 ft3
(0 to 156.2 L/ min @ 161 bar)
4WD 12.0 L x 16.5, 8-ply rating (914 mm) (251 kg) (0.36 m3)
Backhoe flow @ rated engine RPM:
Rear tires: High Capacity Buckets
41 gpm @ 3,100 psi
2 / 4WD 19.5 L x 24.0, 10-ply rating 24 in 447 lb 8.50 ft3
(156.2 L / min @ 214 bar)
2 / 4WD 17.5 L x 24.0, 10-ply rating (610 mm) (203 kg) (0.24 m3)
Manual backhoe control valve:
Loader: 30 in 502 lb 10.60 ft3
Six or seven-spool monoblock open
Bucket position indicator; Lifting lugs on (762 mm) (228 kg) (0.30 m3)
center control valve. Features “Pro-Control”
standard bucket; Single lever control w/ self-
which includes custom designed spools NOTE: *Turning radius dimensions curb to curb
leveling and return-to-dig; Hand operated w/ 17.5 L x 24 tires.
for each individual function along with “swing
clutch disconnects on loader and shift levers,
cushioning” valve for zero-wag swing control.
single lever 4-function loader control: lift,
Basic control valve has an open center
dump, clutch cut-out, differential lock.
parallel circuit for all functions.
Loader bucket sizes:
Pilot backhoe control valve:
Six, seven, or eight spool sectional closed Width Weight Struck Heaped
center control valve. Features “Pro-Control” Long Lip Bucket
which includes custom designed spools 82 in without bolt-on edge /
for each individual function along w/ “swing 93 w/ bolt-on edge
cushioning” valve for zero-wag swing control. 82 in 864 lb 0.88 yd3 1.03 yd3
Basic control valve is closed center, (2.08 m) (392 kg) (0.67 m3) (0.79 m3)
w/ circuits in parallel w/ a post-
compensated, flow sharing feature for 93 in 1,188 lb* 1.10 yd3 1.29 yd3
simultaneous operation of all circuits. (2.36 m) (539 kg) (0.89 m3) (0.99 m3)
Unidirectional auxiliary hydraulics: 4 IN 1® Bucket w/ bolt-on edge
Unidirectional hydraulic valve is equipped w/ an 82 in 1,572 lb* 0.85 yd3 1.04 yd3
adjustable LS relief valve to control attachment (2.08 m) (713 kg) (0.65 m3) (0.80 m3)
pressure and a 6 position flow control selector NOTE: *Weight of 4 IN 1® bucket includes edges,
for 6 detented, distinct flow settings. cylinders, and tube lines.

Actuation:
Manual backhoe controls – cab floor pedal
Pilot controls – left hand joystick
Bidirectional auxiliary hydraulics*:
Actuation:
Activate the bidirectional switch located on
the rear console
Manual shift – bidirectional linkage on far
right of backhoe tower
Pilot controls – left-hand joystick
NOTE: *Available w/ Combo Aux. Hyd. option.

580 Super N • Page 2 of 7

 J

F
A

N B
E
H

C
G

O L
K
M
Line drawings are for illustrative purpose only and may not be exact representation of unit.

LOADER DIMENSIONS
Long Lip Bucket* 4 IN 1® Bucket
A. Overall operating height – fully raised 13 ft 9 in (4.18 m) 13 ft 8 in (4.16 m)
Height to:
B. Bucket hinge pin fully raised 11 ft 3 in (3.42 m) 11 ft 3 in (3.42 m)
C. Bucket hinge pin at SAE carry 13.6 in (345 mm) 13.6 in (345 mm)
D. Dump angle at full height 47° 47°
E. Dump clearance at full height, 45° dump:
Bucket 8 ft 10 in (2.69 m) 8 ft 11 in (2.71 m)
Clam open — 9 ft 8 in (2.96 m)
F. Dump reach at full height, 45° dump – from bumper:
Bucket 31.5 in (801 mm) 29.1 in (738 mm)
Clam open — 15.3 in (388 mm)
Bucket rollback:
G. @ Groundline 42° 42°
H. @ SAE carry 42° 42°
J. @ Full height Adjustable Adjustable
K. Digging depth below grade:
Bucket flat 6.1 in (155 mm) 4.8 in (122 mm)
Clam open – dozing — 4.1 in (103 mm)
L. Reach from front axle centerline – bucket on ground 6 ft 10 in (2.07 m) 6 ft 8 in (2.03 m)
Lift capacity to full height – calculated values 7,044 lb (3 195 kg) 6,703 lb (3 040 kg)
Breakout force – calculated values:
Lift cylinders 9,833 lb (4 460 daN) 9,610 lb (4 359 daN)
Dump cylinders 10,947 lb (4 965 daN) 11,658 lb (5 288 daN)
Bucket cutting edge width 82.5 in (2.09 m) 82.0 in (2.08 m)
Maximum grading angle 114° 114°
Maximum clam opening — 38.3 in (972 mm)
Moldboard height — 36.8 in (934 mm)
Raising time to full height – manual/ pilot controls 2.6/ 3.2 sec 2.6/3.2 sec
Bucket dumping time 0.8 / 1.2 sec 0.8/1.2 sec
Lowering time:
Power down 1.9/ 2.1 sec 1.9/2.1 sec
Return-to-dig 2.5/ 2.2 sec 2.5/2.2 sec
Clam:
Open time — 1.1 sec
Close time — 1.1 sec
NOTE: *Loader dimensions taken with 4WD, 19.5 L x 24.0 rear tires.

580 Super N • Page 3 of 7

DIMENSIONS
2WD with 17.5 L x 24.0 rear tires 4WD with 19.5 L x 24.0 rear tires
M. Overall transport length:
Long Lip bucket with Quick Coupler 23 ft 5 in (7.14 m) 23 ft 4 in (7.10 m)
4 IN 1® bucket with Quick Coupler 23 ft 3 in (7.07 m) 23 ft 1 in (7.04 m)
Long Lip bucket with Straight Links 23 ft 6 in (7.15 m) 23 ft 4 in (7.12 m)
4 IN 1® bucket with Straight Links 23 ft 3 in (7.09 m) 23 ft 2 in (7.06 m)
Overall transport width 7 ft 2 in (2.17 m) 7 ft 2 in (2.17 m)
Height:
To top of canopy 8 ft 8 in (2.64 m) 8 ft 9 in (2.66 m)
To top of cab 8 ft 9 in (2.68 m) 8 ft 11 in (2.72 m)
To top of exhaust stack 8 ft 5 in (2.58 m) 8 ft 7 in (2.62 m)
N. Transport 10 ft 10 in (3.29 m) 11 ft 1 in (3.37 m)
Ground clearance at backhoe frame 12 in (304 mm) 15 in (381 mm)
Angle of departure 15.3° 19.0°
Front wheel tread:
11.0 L x 16.0 67.5 in (1.72 m) 67.5 in (1.72 m)
12.0 L x 16.5 67.7 in (1.72 m) 67.7 in (1.72 m)
19.5 L x 24.0 61.2 in (1.55 m) 61.2 in (1.55 m)
17.5 L x 24.0 63.1 in (1.60 m) 63.1 in (1.60 m)
Width over tires:
11.0 L x 16.0 79.3 in (2.02 m) 79.3 in (2.02 m)
12.0 L x 16.5 81.1 in (2.06 m) 81.1 in (2.06 m)
19.5 L x 24.0 81.4 in (2.07 m) 81.4 in (2.07 m)
17.5 L x 24.0 81.7 in (2.07 m) 81.7 in (2.07 m)
2WD 4WD
O. Wheelbase:
19.5 L x 24.0 84.0 in (2.13 m) 84.5 in (2.15 m)
17.5 L x 24.0 84.0 in (2.13 m) 84.5 in (2.15 m)

CYLINDERS
Bore Diameter Rod Diameter Stroke Closed Length
Loader:
Lift (2) 3.25 in (82.6 mm) 1.75 in (44.5 mm) 28.86 in (733.0 mm) 42.95 in (1 062.0 mm)
Dump (2) 3.00 in (76.2 mm) 1.50 in (38.1 mm) 20.33 in (516.5 mm) 29.90 in (759.5 mm)
4 IN 1® clam (2) 3.00 in (76.2 mm) 1.75 in (44.5 mm) 9.08 in (230.6 mm) 19.62 in (498.3 mm)
Backhoe:
Boom  5.00 in (127.0 mm) 2.50 in (63.5 mm) 38.25 in (971.6 mm) 52.82 in (1 341.6 mm)
Dipperstick  4.75 in (120.7 mm) 2.50 in (63.5 mm) 25.14 in (628.5 mm) 39.65 in (1 007.0 mm)
Bucket  3.50 in (88.9 mm) 2.50 in (63.5 mm) 35.35 in (897.9 mm) 48.17 in (1 223.6 mm)
Extendahoe®  3.00 in (76.2 mm) 1.75 in (44.5 mm) 42.05 in (1 068.0 mm) 56.22 in (1 428.0 mm)
Swing (2)  4.00 in (101.6 mm) 2.00 in (50.8 mm) 11.50 in (292.0 mm) 24.44 in (620.8 mm)
Stabilizer (2)  4.50in (114.3 mm) 2.25 in (57.2 mm) 21.37 in (542.9 mm) 33.87 in (860.2 mm)

AXLE RATINGS
Front – 2WD Rear Front – 4WD
Maximum static 70,821 lb (32 124 kg) 90,145 lb (40 889 kg) 64,613 lb (29 308 kg)
Dynamic operating 44,261 lb (20 076 kg) 56,200 lb (25 492 kg) 39,328 lb (17 839 kg)
Static operating 17,704 lb (8 030 kg) 22,480 lb (10 197 kg) 15,732 lb (7 136 kg)
Oscillation – front axle 22° total – 11° side to side — 22° total – 11° side to side

580 Super N • Page 4 of 7

BACKHOE LIFT CAPACITIES
Standard Backhoe Extendahoe®
Retracted Extended
Standard Power Lift Standard Power Lift Standard Power Lift
Boom Lift Lift Capacity Lift Capacity Lift Capacity Lift Capacity Lift Capacity Lift Capacity
lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg)
+16 ft (4.87 m) — — — — 2,115 (959) 2,298 (1 043)
+14 ft (4.27 m) 3,039 (1 378) 3,285 (1 490) 2,837 (1 287) 3,083 (1 398) 2,395 (1 086) 2,603 (1 181)
+12 ft (3.66 m) 3,413 (1 548) 3,691 (1 674) 3,201 (1 452) 3,479 (1 578) 2,536 (1 151) 2,757 (1 250)
+10 ft (3.05 m) 3,499 (1 587) 3,784 (1 716) 3,281 (1 488) 3,566 (1 618) 2,593 (1 176) 2,818 (1 278)
+8 ft (2.44 m) 3,485 (1 581) 3,768 (1 709) 3,263 (1 480) 3,546 (1 608) 2,564 (1 163) 2,786 (1 264)
+6 ft (1.83 m) 3,438 (1 559) 3,717 (1 686) 3,213 (1 457) 3,492 (1 584) 2,549 (1 156) 2,770 (1 257)
+4 ft (1.22 m) 3,374 (1 530) 3,648 (1 655) 3,146 (1 427) 3,420 (1 551) 2,521 (1 144) 2,741 (1 243)
+2 ft (0.61 m) 3,307 (1 500) 3,575 (1 622) 3,077 (1 396) 3,345 (1 517) 2,489 (1 129) 2,706 (1 227)
Ground Level 3,251 (1 475) 3,513 (1 594) 3,018 (1 369) 3,280 (1 488) 2,489 (1 129) 2,706 (1 227)
-2 ft (0.61 m) 3,201 (1 452) 3,459 (1 569) 2,965 (1 345) 3,223 (1 462) 2,466 (1 118) 2,680 (1 215)
-4 ft (1.22 m) 3,175 (1 440) 3,430 (1 556) 2,935 (1 331) 3,190 (1 447) 2,446 (1 109) 2,659 (1 206)
-6 ft (1.83 m) 3,182 (1 443) 3,437 (1 559) 2,938 (1 333) 3,193 (1 448) 2,443 (1 108) 2,656 (1 205)
-8 ft (2.44 m) 3,258 (1 478) 3,520 (1 597) 3,007 (1 364) 3,269 (1 483) 2,465 (1 118) 2,679 (1 215)
-10 ft (3.05 m) 3,441 (1 561) 3,717 (1 686) 3,175 (1 440) 3,451 (1 565) 2,530 (1 148) 2,750 (1 248)
-12 ft (3.66 m) — — — — 2,707 (1 228) 2,943 (1 335)
-14 ft (4.27 m) — — — — 3,239 (1 469) 3,521 (1 597)
Dipper Lift
+14 ft (4.27 m) — — —­ —­ 4,281 (1 942) 4,281 (1 942)
+12 ft (3.66 m) 5,822 (2 641) 5,822 (2 641) 5,618 (2 548) 5,618 (2 548) 4,046 (1 835) 4,046 (1 835)
+10 ft (3.05 m) 5,600 (2 540) 5,600 (2 540) 5,399 (2 449) 5,399 (2 449) 3,984 (1 807) 3,984 (1 807)
+8 ft (2.44 m) 5,562 (2 523) 5,562 (2 523) 5,360 (2 431) 5,360 (2 431) 3,913 (1 775) 3,913 (1 775)
+6 ft (1.83 m) 6,236 (2 829) 6,236 (2 829) 6,030 (2 735) 6,030 (2 735) 4,166 (1 889) 4,166 (1 889)
+4 ft (1.22 m) 7,424 (3 368) 7,424 (3 368) 7,203 (3 267) 7,203 (3 267) 4,102 (1 861) 4,102 (1 861)
+2 ft (0.61 m) — — — — 4,850 (2 200) 4,850 (2 200)
NOTE: Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum hydraulic lift force available with the specified options.

BACKHOE OPERATIONAL DATA

Standard Backhoe Extendahoe®
Retracted Extended
Digging depth:
Maximum 14 ft 6 in (4.41 m) 14 ft 6 in (4.41 m) 17 ft 11 in (5.47 m)
Maximum with hi-capacity bucket 15 ft 0 in (4.51 m) 15 ft 0 in (4.51 m) 18 ft 6 in (5.63 m)
2 ft (610 mm) flat bottom 14 ft 4 in (4.37 m) 14 ft 4 in (4.37 m) 17 ft 10 in (5.43 m)
8 ft (2.44 m) flat bottom 13 ft 4 in (4.06 m) 13 ft 4 in (4.06 m) 17 ft 1 in (5.19 m)
Overall reach from:
Rear axle centerline 21 ft 10 in (6.66 m) 21 ft 10 in (6.66 m) 25 ft 3 in (7.69 m)
Swing pivot 18 ft 2 in (5.55 m) 18 ft 2 in (5.55 m) 21 ft 7 in (6.58 m)
Loading height 12 ft 1 in (3.67 m) 12 ft 1 in (3.67 m) 14 ft 5 in (4.38 m)
Loading reach 4 ft 7 in (1.41 m) 4 ft 7 in (1.41 m) 7 ft 3 in (2.20 m)
Swing arc 180° 180° 180°
Bucket rotation:
Straight links 175.6° 175.6° 175.6°
Mechanical coupler 198.0° 198.0° 198.0°
Hydraulic coupler – Extendahoe® dipper 194.8° 194.8° 194.8°
Hydraulic coupler – standard dipper 198.0° 198.0° 198.0°
Stabilizer spread – operating:
Flip pad 9 ft 3 in (2.82 m) 9 ft 3 in (2.82 m) 9 ft 3 in (2.82 m)
Cast pad 9 ft 7 in (2.93 m) 9 ft 7 in (2.93 m) 9 ft 7 in (2.93 m)
Digging force:
Bucket cylinder – SAE rated 3,460 psi 13,975 lb (61 363 N) 13,975 lb (61 363 N) 13,975 lb (61 363 N)
Bucket cylinder – Power Lift 14,452 lb (64 240 N) 14,452 lb (64 240 N) 14,452 lb (64 240 N)
Dipper cylinder – SAE rated 3,460 psi 8,657 lb (38 508 N) 8,657 lb (38 508 N) 6,305 lb (28 045 N)
Dipper cylinder – Power Lift 9,070 lb (40 345 N) 9,070 lb (40 345 N) 6,606 lb (29 382.7 N)
Leveling angle:
Flip pad 11.8° 11.8° 11.8°
Cast pad 12.8° 12.8° 12.8°
NOTE: L
 ift capacities apply straight to the rear of prime mover. 4WD with 19.5 L x 24.0 tires equipped with 24 in (610 mm) heavy-duty bucket and Case coupler except as
noted.

580 Super N • Page 5 of 7

STANDARD EQUIPMENT
OPERATOR ENVIRONMENT DRIVETRAIN LOADER
See page 1 Powershift S-Type transmission, 4F-3R See page 2
ENGINE electronic transmission controller and kick BACKHOE
down in loader control lever – 2WD or 4WD
FPT F5BFL413B diesel with auto function See page 2
Diesel Oxidation Catalyst with SCR Front axle: OTHER
Full flow engine oil filter 2WD heavy-duty front axle with Forward tilt engine hood
Air cleaner – replaceable dry type 11.0 L x 16.0 tires Replaceable, molded front bumpers
with radial seal 4WD heavy-duty mechanically driven front
Front /Rear tie downs
axle with 12.0 L x 16.5 tires and drive
Aspirated air cleaner Reflective logos
shaft guard
Fuel filter with water trap Lights – cab and canopy:
Rear axle:
Radiator with de-aeration bottle 2 / 4WD heavy-duty outboard planetary drive 2 front driving
Antifreeze to -34° F (-37° C) with 19.5 L x 24.0 tires 2 rear tail/ stop
2 front flashers/ turn
Electronic throttles – foot and rotary hand Torque converter – 11.8 in (300 mm)
2 rear flashers/ turn
Self-adjusting belt On-the-go electric 4WD control
Cab only:
High Pressure Common Rail computer Electric F / R shuttle control Adjustable halogen work lights – 55 W:
controlled injection with diagnostic features Electric differential lock control, push-button 2 front
Park brake, spring-applied, hydraulic 2 side – left and right
release – SAHR 4 rear

HYDRAULICS Canopy only:

Adjustable halogen work lights – 55 W:
Ground level remote hydraulic test ports 2 front
Pump 41 gpm @ 3,000 psi 2 side – left and right
(156.2 L / min @ 207 bar) 4 rear
Heavy-duty oil cooler TELEMATICS
7-micron, spin on oil filter CASE SiteWatch™ Telematics – includes
hardware and a 3-yr Advanced
data subscription

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT ENGINE BACKHOE (continued)
Speed selectable Auto Ride Control – Cold Weather Starting Aid Pilot operated control system:
4WD models with dual 12 Volt batteries and glow plugs Fingertip proportional Electro-Hydraulic
Standard Ride Control – 2WD models Block heater stabilizer controls
Thumb-operated proportional Electro-
Comfort Steering with momentary latching DRIVETRAIN Hydraulic Extendahoe® control
switch, two speed steering pump and Standard Powershuttle, 4F-4R Power Shuttle Thumb-operated horn button
3rd/4th gear cutout Synchromesh transmission Thumb-operated auxiliary hydraulic control
ROPS/FOPS certified protective cab with rear Powershift H-Type transmission, 4F-3R Infinitely adjustable towers
wipers and floor mat hydraulic clutch shifting with auto function – In-cab switchable “excavator to backhoe”
Cab Convenience Package containing 4WD only control pattern change
pull-down sun visor, window washer – front Rear axle heavy-duty outboard kick down, Flip over stabilizer pads
and rear, left-hand storage tray, deluxe planetary drive with 17.5 L x 24.0 tires either Cemetery/ Street pads
interior package, Sound Reduction Package 2WD or 4WD
for cab models – levels reduced to 72 dB (A), Hydraulic bucket quick coupler
right-hand threshold storage box LOADER Universal coupler – CAT/ Deere compatible
Air-conditioning for cab models Auxiliary hydraulics for loader-mounted Buckets – see page 2
equipment with thumb-operated
Mechanical suspension seat with flip-up proportional control OTHER
armrests, 180° swivel, cloth or vinyl, Front:
adjustable seat and weight, backrest angle, Hydraulic front quick coupler
11.0 L x 16.0 or 12.0 L x 16.5
lumbar and cushion angle Loader linkage without loader bucket
Rear:
Air Ride suspension seat with flip-up armrests, Tool portfolio of additional attachments 17.5 L x 24.0 or 19.5 L x 24.0
180° swivel, heated, electric height Buckets – see page 2
adjustment, adjustable back rest and lumbar Special paint
BACKHOE Tool box – bolt-on, step mounted
support – cab units cloth, canopy units vinyl
Auxiliary backhoe unidirectional hydraulics Front counterweights:
Pull-down sun visor for canopy models
Auxiliary backhoe combo hydraulics: 700 lb and 1,100 lb (318 kg and 500 kg)
Radio, AM/FM Stereo/WB, MP3 auxiliary
Hand lever operated for bidirectional Rotating beacon
input – cab models
manual controls
3 in (75 mm) seat belt for mechanical and Button operated for pilot controls includes Master disconnect switch and
air suspension seat unidirectional and bidirectional remote jump-start terminals
Auxiliary hydraulics with flow from Eco-Mode – Detent on backhoe hand throttle,
0 to 41 gal / min (0 to 156.2 L / min) push switch on dash
Extendahoe®
Power Lift
Bolt-on hardened gripper teeth
Two-lever control – backhoe or Extendahoe®
580 Super N • Page 6 of 7
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: Case Construction Inc. reserves the right to change these specifications without notice
and without incurring any obligation relating to such change. Case Construction Inc. does not warrant
the safety or reliability of attachments from other manufacturers.
CASE is a trademark registered in the United States and many other countries, owned by or licensed to www.casece.com
CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States
and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.
Form No. CCE201503580SN Printed in U.S.A. © 2015 CNH Industrial America LLC
Replaces Form No. CCE201502580SN 580 Super N • Page 7 of 7 All Rights Reserved

All Case construction equipment is biodiesel ready.