I N D U S T R I A L S P E C I F I C A T I O N S
P E R F O R M A N C E
R AT I N G
6B5.9 - 152 Curve: FR-90058
Maximum Horsepower: 158 hp
@ 2400 rpm
Maximum Torque: 453 lb-ft
@ 1500 rpm
Nominal Torque Rise: 37%
Fuel Economy: 0.327 lb/hp-hr
@ 1500 rpm
Curves shown represent gross engine
performance capabilities obtained and
corrected in accordance with SAE J1995
conditions of 99 kPa (29.31 in Hg) dry
barometric pressure (90 m [300 ft.] altitude),
25 °C (77 °F) air inlet temperature, and 1 kPa
(0.30 in. Hg) water vapor pressure.
All data is based on the engine operating
with fuel system, water pump, lubricating oil
pump, air cleaner, and muffler; not included
are alternator, compressor, fan, optional
equipment, and driven components. Curves
represent performance with No. 2 diesel fuel.
The engine may be operated at altitudes up
to 3 600 m (12,000 ft.) without changing the
fuel setting.
K E Y F E A T U R E S
Bosch In-Line Fuel Pump delivers higher Improved Pistons with raised top ring
injection pressures for cleaner combus tion eliminate air space in the cham ber for better
and gives owner option of using low- combu stion.
lubricity fuels.
Edge-Molded Gaskets provide tighter
Holset HX35 Turbocha rger optimizes seal ing to eliminate poss ible leakage.
operation acr oss the tor que curve using
Plateau-Honed Cylinder Liners result in
the wastegate turbo.
near-perfect cylinder geometry and virtually
Unitized Block Design results in 40% eliminate oil consumption.
fewer parts than comp etitive diesels.
Noise Reduction Options provide three
Resis tive Grid Heating preheats intake levels of acoustic barrier pr otection.
air electrically to enhance startability. Emission Control Cummins B Series engines meet all
current U.S.EPA Tier 2, EU.Stage II compact with mobile
Off-Highway standard.
S P E C I F I C AT I O N S
Engine Type..............................................In-line, 4 cycle Coolant Capacity ............................10.4 L (11.2 U.S.qt.)
Number of Cylinders............................6 Length ..................................................40.4 in. (1026 mm)
Displacement ........................................5.9 L (359 cu.in.) Width....................................................27.5 in. (699 mm)
Bore and Stroke ....................................4.02 in. x 4.72 in. Height .................................................35.9 in. (912 mm)
Compression Ratio ..............................16.8:1 Weight .................................................977 lbs. (443 kg)
Oil System Capacity ............................16.3 L (17.2 U.S.qt.)
Cummins Engine Company, Inc.
Box 3005
Columbus, IN 47202-3005
U.S.A.
Phone 1-800-DIESELS (1-800-343-7357)
Fax 1-800-232-6393
E-mail: powermaster@cummins.com
Internet: http://www.cummins.com
Bulletin 3885356 Rev. 3/99
© 1999 Cummins Engine Company, Inc.
Printed in U.S.A.
