ENGINE POWER

895 kW / 1.200 HP @ 1.900 rpm

MAXIMUM GVW
166.000 kg
BODY CAPACITY, HEAPED
60,0 m³

HD785-7

HD
785

Off-Highway Truck

HD785-7
 HD785-7 O F F - H I G H W A Y TR U C K

WALK-AROUND
Productivity features
• High performance Komatsu SAA12V140E-3 engine
• Variable horsepower control (VHPC)
• Two-speed selective reverse gears of RH and RL
• Anti-pitching 4-wheel oil-cooled multiple-disc retarder
• Automatic Idling Setting System (AISS)
• Auto Retard Speed Control (ARSC)
• High strength body Environment-friendly
• Minimum turning radius: 10,1 m • Meets EPA Tier 2
• ABS (Anti-Lock Braking System) (Option) • Low operating noise
• ASR (Automatic Spin Regulator) (Option) • Low fuel consumption
• Payload meter function • Lead-free radiator
• Brake cooling oil recovery tank

2
 OFF-HIGHWAY TRUCK
HD785-7
ENGINE POWER
895 kW / 1.200 HP

MAXIMUM GVW
166.000 kg
Operator environment
• Wide, spacious cab with excellent visibility BODY CAPACITY, HEAPED
60,0 m³
• Ergonomically designed cab
• Easy-to-see instrument panel
• Air suspension seat
• Tiltable, telescoping steering wheel and low effort pedals
• Electric body dump control lever
• K-ATOMiCS transmission with “Skip-Shift” function
• Synchronous control of engine and transmission
• Hydropneumatic suspension for all terrains
• Viscous cab mounts
• Built-in ROPS/FOPS
• Supplementary steering (Automatic)
• Pedal-operated secondary brakes
• Three-mode hydropneumatic suspension (auto-suspension) (Option)
• Front stairway with handrails

Reliability features
• Fully hydraulic brake system
• Reliable Komatsu manufactured major
components
• High-rigidity frame
• Wet multiple-disc brakes (front and rear)
• Flat face-to-face O-ring seals
• Sealed DT-connectors
• Highly reliable hydraulic system

Easy maintenance
• Long oil change interval
• Centralized greasing points
• Centralized arrangement of filters
• Flanged type rims
• Vehicle Health Monitoring System (VHMS)
• Satellite communication system for VHMS
• KOMTRAX™ Komatsu Tracking System

3
 HD785-7 O F F - H I G H W A Y TR U C K

PRODUCTIVITY & ECONOMY

High performance Komatsu SAA12V140E-3 Variable horsepower control (VHPC) with
engine mode selection system
This engine delivers faster acceleration and higher The system allows selection of the appropriate mode
travel speeds with high horsepower per ton. Advanced between two modes “Power mode ” or “Economy mode”
technology, such as High Pressure Common Rail injec- according to each working condition. The mode is easily
tion system (HPCR), air-to-air aftercooler efficient turbo- selected with a switch in the operator’s cab. When the
charger gives high torque at low speed, impressive key switch is turned on, Economy mode is selected
acceleration, and low fuel consumption for maximum automatically. Select Power mode by using the switch
productivity. when needed.

VHPC (Variable horsepower control)

Both in Power and Economy modes, the VHPC system
detects whether machine condition is loaded or unload-
F7-R2 (RH/RL) fully automatic transmission
ed and selects optimum horsepower setting mode, pro-
The transmission is configured with 7 forward and 2
viding both high production and low fuel consumption.
reverse gears. Fully automatic control is applied to all
forward gears and an optimum gear is automatically
Power mode: Makes best use of the horsepower to at-
selected according to the
tain optimal production. This mode is suitable for opera-
travel speed and engine
tion in job sites including uphill travel with load where
speed. The shifting point is
powerful hauling is top priority.
automatically selected de-
pending on the acceleration
Economy mode: Sets the maximum horsepower at low
of the machine to reduce
level to reduce fuel consumption. The machine main-
excessive fuel consumption.
tains sufficient power for economical operation in this
mode.

Two-speed selective reverse gears (RH/RL)

In order to meet various operating conditions, two
reverse gears are provided. The switch on the panel 895 kW
(1.200 HP)
allows the operator to select optimum reverse gear of Power
RH or RL depending on the job site conditions. Further- mode

more, the reverse gear is equipped with a lockup clutch,

809 kW
allowing the operator to reverse the machine without (1.085 HP)
overheating.
750 kW
(1.005 HP)
RH: Suitable for normal operation. Thanks to the lockup
Economy
clutch, the machine can be reversed at higher speed mode
698 kW
(936 HP)
RL: Suitable for operation in job sites where there are
steep grades. Automatic selection Manual selection

4
 OFF-HIGHWAY TRUCK
HD785-7

Anti-pitching 4-wheel oil-cooled multiple disc Auto Retard Speed Control (ARSC)
retarder ARSC allows the operator to simply set the downhill
The machine is equipped with an anti-pitching 4-wheel travel speed and go down slopes at a constant speed.
oil-cooled multiple disc retarder that applies retarding As a result, the operator can concentrate on steering.
force on all four wheels. With this retarder, the retard- The speed can be set at increments of 1 km/h per click
ing force is shared between four wheels. This reduces to match the optimum speed for the slope. Also, when it
the possibility of tire-lock and enables effective use of is predicted that the retarder oil temperature becomes
retarder capacity, allowing stable downhill travel. The overheated, since the retarder oil temperature is always
machine descends slopes smoothly and comfortably monitored, operator is informed this by warning lamp.
without machine pitching since retarding force on front
and rear wheels is controlled independently.

UP

SET

CANCEL
DOWN

Go down
slope at
Front brake Rear brake constant
speed

Anti-pitching 4-wheel oil-cooled

multiple disc retarder
F/R: Retarder (4-wheel)

Conventional
R: Retarder (2-wheel)

• Retarder absorbing capacity (continuous descent):

1.092 kW (1.464 HP)
• Brake surface
Front total: 37.467 cm²
Rear total: 72.414 cm²

5
 HD785-7 O F F - H I G H W A Y TR U C K

PRODUCTIVITY & ECONOMY

Eliminating hydraulic losses & optimizing
transmission control
Hydraulic circuits such as brake cooling, steering, body
dump control, transmission control etc. are optimized
to reduce fuel consumption. As a result, the fuel con-
sumption for operation with medium and light load is
improved.

Automatic Idling Setting System (AISS)

This system facilitates quick engine warm-
up and cab cooling/warming. When setting
the system ON, engine idle speed is kept at
945 rpm when coolant temperature is 50 °C
or lower. Speed automatically returns to 750 rpm when
coolant temperature reaches 50 °C.
Long wheelbase and wide tread
With an extra-long wheelbase, a wide tread and an
exceptionally low center of gravity, the HD785-7 hauls
Small turning radius A-frame
the load at higher speed for greater productivity, and
The MacPherson strut type delivers superior driving comfort over rough terrain.
front suspension has a special
10,1 m
A-frame between each wheel
and the main frame. The wider Large body
space created between the A wide target area makes for easy loading with minimal
front wheels and the main soil spillage and more efficient hauling.
frame increases the turning Heaped capacity: 60,0 m³
angle of the wheels. The larger this turning angle, the Target area (inside length x width):
smaller the turning radius of the truck. 7.065 mm × 5.200 mm

6
 OFF-HIGHWAY TRUCK
HD785-7

SAFETY FEATURES
Built-in ROPS/FOPS Pedal-operated secondary
These structures con- brake
form to ISO 3471 and If there should be a failure on
SAE J1040 standards the foot brake circuit, both front
and ISO 3449 and SAE and rear parking brakes are
J231 FOPS standards. activated as a pedal operated
secondary brake. In addition,
when hydraulic pressure drops
below the rated level, the parking brake is automatically
actuated.

Parking brakes on 4 wheels ABS (Anti-Lock Braking System) (Option)

The machine is equipped with spring applied parking Using its outstanding electronics technology, Komatsu is
brakes on 4-wheels. Wet multiple disc brakes built in the first in the industry to introduce ABS on construction
both front and rear axles apply braking force to all four machinery. This system prevents the tyres from locking,
wheels. These brakes are highly reliable require no thus minimizes skidding under slippery conditions while
periodic maintenance. applying the service brake.

ASR (Automatic Spin Regulator) (Option)

ASR automatically prevents the rear tyres on either side
from slipping on soft ground for optimal traction. The
steering angle is monitored in order to ensure smooth
turning.

Front brake Rear brake Supplementary steering and secondary brakes

Supplementary steering and secondary brakes are
standard features.
Steering: ISO 5010, SAE J1511, SAE J53
Brakes: ISO 3450, SAE J1473

Stairway
A stairway at the front of the radiator grill simplifies such
everyday operations as getting on and off the machine.

7
 HD785-7 O F F - H I G H W A Y TR U C K

OPERATOR ENVIRONMENT
Wide, spacious cab with excellent visibility
The wide cab provides a comfortable space for the
operator and a full size trainer’s seat. A large electrically
operated window and the operator’s seat positioned on
the left hand side ensures superior visibility.

Ergonomically designed cab

The ergonomically designed operator’s compartment
makes it very easy and comfortable for the operator to
use all the controls. The result is more confident opera-
tion by operators and greater productivity. A rear view
camera and monitor system is supplied as standard.

Easy-to-see instrument panel Steering wheel and pedals

The instrument panel makes it easy to monitor critical Low effort pedals reduce operator fatigue when working
machine functions. In addition, a caution light warns the continuously for long periods. The tiltable, telescoping
operator of any problems that may occur. This Komatsu steering column enables operators to maintain an opti-
on-board monitoring system makes the machine very mum driving position at all times.
friendly and easy to service.

Electric body dump control lever

Air suspension seat is standard The low effort lever makes dumping easier than ever.
The air suspension, fabric-covered seat which is adjust- A positioning sensor is
able to the operator’s weight is provided as standard. installed for dump body
The air suspension seat dampens vibrations transmitted control which significantly
from the machine and reduces operator fatigue as well reduces the shock made by
as holding the operator securely to assure confident the lowering of the dump
operation. body.

8
 OFF-HIGHWAY TRUCK
HD785-7

K-ATOMiCS with “Skip-Shift” function The MacPherson strut type front suspension
The K-ATOMiCS (Komatsu Advanced Transmission with The MacPherson type independent suspension is
Optimum Modulation Control System) ensures proper installed to the front wheels. The linkage arrangement
clutch modulation pressure when the clutch is engaged. with less friction allows the front wheel to follow the
The total control system controls both the engine and undulation of road surface smoothly, realizing excellent
transmission by monitoring the vehicle conditions. This riding comfort.
system and newly added “skip-shift” function ensure
smooth shifting and responsive acceleration.

“Skip-shift” function
The optimum travel speed automatically selected in
response to the angle of ascent. Reduced frequency of
down shifts and smoother operation are provided.

Skip-shift Shift down

Shift hold

Current Shift down

Shift down
Shift down

Three-mode hydropneumatic suspension

Viscous cab mounts (Auto-suspension) (Option)
Viscous mounts reduce the For a comfortable and stable ride, the suspension mode
noise transmitted to the cab is automatically switched to one of three stages (soft,
and achieve a quiet 75 dB(A) medium and hard) according to load and operating
noise level (SAE J1166). conditions.

9
 HD785-7 O F F - H I G H W A Y TR U C K

ADVANCED MONITORING SYSTEM

Availability rate with vehicle monitoring system
The electronic display panel shows current vehicle condition and how to fix them with action codes and check
results with service codes. Thus, vehicle management is easier and the working rate is higher. At the same time the
monitoring data is saved to be used for later troubleshooting.

Equipment Management Monitoring System (EMMS)

Monitoring network

Monitoring system Engine controller

Transmission controller

This window is normally used as the service meter/ Retarder controller

odometer. If the dump truck has any abnormality or
needs to be inspected or serviced, a message of proper
remedy and an action code are displayed in this win-
dow. Each time the starting switch is turned on, the sys-
tem is checked. If any filter or oil needs to be replaced
at this time, the maintenance caution lamp flashes or
lights up and the filter or oil to be replaced is displayed.
If any abnormality occurs in the dump truck, a mes-
sage is dispayed on the character diplay to notify the
operator of what action to take. Accordingly, the opera-
tor can take that action immediately. The abnormality is
displayed as a fault code on the character display and
stored so that it will be available for quick troubleshoot-
ing to shorten downtime.

10
 OFF-HIGHWAY TRUCK
HD785-7

EASY MAINTENANCE
VHMS (Vehicle Health Monitoring System) Centralized greasing
The VHMS controller monitors the health conditions of points
major components and enables analysis of the machine Greasing points are
and its operations. The VHMS controller monitors and centralized at three
stores all data received from the engine and transmis- locations.
sion controller and various additional sensors on the
major components. This way, it’s possible to record
the evolution of the machine’s health condition. This Centralized arrangement
data can be downloaded via a portable computer or of filters
via satellite communication. In both cases, Komatsu The filters are centralized
specialists can analyse this downloaded data and follow so that they can be serviced
up trends in the machine’s condition. When using the easily.
satellite communications, the Komatsu specialist can in-
form you whenever an abnormal condition occurs. This
way, repair and maintenance costs can be optimised, Flange type rims
and maximum machine availability can be maintained.
Flange type rims provide
The Komatsu Tracking System, KOMTRAX™ lets you
easy removal/installation of
pin-point the precise location of your machines.
the tyres.

Satellite communication

Customer
job site
KOMATSU Electric circuit breaker
A circuit breaker is adopted
in important electric circuits
Internet
that should be restored in
a short time when a prob-
lem occurs in the electrical
Personal
computer system.
WebCARE Server
terminal
Komatsu (for downloading
distributors data)

Payload meter function on VHMS Extended service intervals

The payload is indicated on the Equipment Manage- In order to minimize operating costs, service intervals
ment Monitor. This option allows the production volume have been extended:
and the working conditions on the dump trucks to be • Engine oil 500 hours
analyzed directly via a personal • Hydraulic oil 4.000 hours
computer. The system can store
up to 2.900 working cycles.

Brake cooling oil recovery tank

To protect the environment, a tank is installed to recover
brake cooling oil in the event of brake floating seal leak-
age.

11
 HD785-7 O F F - H I G H W A Y TR U C K

RELIABILITY FEATURES
Komatsu components Flat face-to-face O-ring seals
Komatsu manufactures the engine, torque converter, Flat face-to-face O-ring
Nipple
transmission, hydraulic units, and electrical parts on this seals are used to se-
dump truck. Komatsu dump trucks are manufactured curely seal all hydraulic
with an integrated production system under a strict hose connections and Hose

quality control system. to prevent oil leakage.

O-rings

High-rigidity frames
Front support is integrated with the
frame. The frame rigidity is in-
creased drastically. As a re- Sealed DT-connectors
sult, flexural rigidity and torsional Main harnesses and
rigidity that are indicators of controller connectors are
drivability and riding quality equipped with sealed
are significantly improved. DT-connectors provid-
ing high reliability, water
resistance and dust
resistance.

Wet multiple-disc brakes and fully hydraulic Reliable hydraulic system

braking system A large capacity oil cooler is installed in each hydraulic
For lower maintenance costs and higher reliability. Wet circuit, improving the reliability of the hydraulic units
disc brakes are fully sealed. Contaminants are kept out, during sudden temperature rises. Further, in addition
reducing wear and maintenance. Brakes require no ad- to the main filter, a 10-micron line filter is located at the
justments for wear, meaning even lower maintenance. entrance to the transmission control valve. This system
The new parking brake is also an adjustment- free, wet helps to prevent secondary faults.
multiple-disc for high reliability and long life. Added reli-
ability is designed into the braking system by the use of
three independent hydraulic circuits. Provides hydraulic
backup should one of the circuits fail. Fully hydraulic
brakes system means no air system to bleed, or con-
densation of water that can lead to contamination, cor-
rosion, and freezing.

12
 OFF-HIGHWAY TRUCK
HD785-7

Rugged and durable dump body design

The standard dump body is made of high-tensile-
strength steel with a Brinell hardness of 400 for excel-
lent rigidity and reduced maintenance cost. The V-shape
and V-bottom design also increase structural strength.
The side and bottom plates of the dump section are
reinforced with ribs for added strength.
A quarry body with a 25 mm Hardox bottom plate with a
Brinell hardness of 450 is also available.

13
 HD785-7 O F F - H I G H W A Y TR U C K

SPECIFICATIONS
ENGINE STEERING SYSTEM

Model........................................................... Komatsu SAA12V140E-3 Type ......................................................Fully hydraulic power steering

Type ................................. Common rail direct injection, water-cooled, with two double-acting cylinders
turbocharged, after-cooled diesel Supplementary steering .......... Automatically and manually controlled
Engine power (meets ISO 5010, SAE J1511 and SAE J53)
at rated engine speed ......................................................1.900 rpm Minimum turning radius, centre of front tyre ............................. 10,1 m
ISO 14396............................................................ 895 kW/1.200 HP Maximum steering angle (outside tyre) ..........................................41°
ISO 9249 (net engine power)............................... 879 kW/1.179 HP
No. of cylinders ................................................................................ 12
Bore × stroke ................................................................ 140 × 165 mm
Displacement.......................................................................... 30,48 ltr
BRAKES
Max. torque.......................................................................... 518 kgf·m
Governor........................................................ Electronically controlled Brakes meet ISO 3450 and SAE J1473 standards.
Lubrication system: Service brakes:
Lubrication method ............................. Gear pump, force lubrication Front.................. Full-hydraulic control, oil-cooled multiple-disc type
Filter .................................................................................... Full flow Rear .................. Full-hydraulic control, oil-cooled multiple-disc type
Air filter ....................... Dry type with double elements and precleaner Parking brake. Spring applied, multiple-disc type, acting on all wheels
(cyclonpack type), plus dust indicator Retarder.................................. Oil-cooled, multiple-disc front and rear
brakes act as retarder
Retarder capacity (continuous)........................... 1.092 kW / 1.464 HP
TRANSMISSION Secondary brake ............................................Manual pedal operation
When hydraulic pressure drops below the rated level,
Torque converter................................... 3-elements, 1-stage, 2-phase
parking brake is automatically actuated.
Transmission......................................... Full-automatic, planetary type
Brake surface:
Speed range ........................7 speeds forward and 2 reverse (RH/RL)
Front............................................................................... 37.467 cm²
Lock-up clutch .............................................. Wet, multiple-disc clutch
Rear ............................................................................... 72.414 cm²
Forward .........................................Torque converter drive in 1st gear,
direct drive in 1st lockup and all higher gears
Reverse ..............................................Torque converter drive (lockup)
Shift control............................... Electronic shift control with automatic HYDRAULIC SYSTEM
clutch modulation in all gears
Hoist cylinder ......................................... Twin, 2-stage telescopic type
Max. travel speed.................................................................... 65 km/h
Relief pressure .................................................. 20,6 MPa/210 kg/cm²
Hoist time (at high idle)..............................................................13 sec
Lowing time (float) .....................................................................14 sec

AXLES

Final drive type .............................................................Planetary gear

CAB
Rear axle ...........................................................................Full floating
Ratios: Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS
Differential............................................................................... 3,357 (Roll-Over Protective Structure) standards and ISO 3449 and SAE
Planetary................................................................................. 6,333 J231 FOPS (Falling Object Protective Structure) standard.

SUSPENSION MAIN FRAME

Independent, hydropneumatic suspension cylinder with fixed throttle Type .......................................................... Box-sectioned construction
to dampen vibration. Integral front bumpers
Effective cylinder stroke:
Front suspension ................................................................320 mm
Rear suspension .................................................................127 mm TYRES
Rear axle oscillation ..................................................................... 6,5°
Standard tyres .....................................................................27.00 R49

14
 OFF-HIGHWAY TRUCK
HD785-7

BODY WEIGHT (APPROX.)

Capacity: Empty weight ....................................................................... 72.600 kg

Struck...................................................................................... 40 m³ Gross vehicle weight ......................................................... 166.000 kg
Heaped (2:1, SAE).................................................................. 60 m³ Not to exceed max. gross vehicle weight, including options, fuel and
Payload......................................................................... 91 metric tons payload.
Material............................................................................. 130 kg/mm² Weight distribution
400 Brinell high tensile strength steel Empty:
Material thickness: Front axle .................................................................................. 47%
Bottom................................................................................... 19 mm Rear axle................................................................................... 53%
Front...................................................................................... 12 mm Loaded:
Sides ....................................................................................... 9 mm Front axle ............................................................................... 31,5%
Target area (inside length × width) .................. 7.065 mm × 5.200 mm Rear axle................................................................................ 68,5%
Dumping angle ...............................................................................48°
Height at full dump............................................................. 10.210 mm
Heating ...................................................................... Exhaust heating
SERVICE REFILL CAPACITIES

Fuel tank................................................................................. 1.308 ltr

Engine oil................................................................................... 129 ltr
ENVIRONMENT Torque converter, transmission and retarder cooling................. 205 ltr
Differentials (total) ..................................................................... 137 ltr
Engine emissions ............................... Fully complies with EPA Tier II Final drives (total) ...................................................................... 128 ltr
exhaust emission regulations Hydraulic system ....................................................................... 175 ltr
Noise levels: Brake control ............................................................................... 36 ltr
LpA operator ear ...........................................75 dB(A) (SAE J1166) Suspension (total)........................................................................ 93 ltr

15
 HD785-7 O F F - H I G H W A Y TR U C K

SPECIFICATIONS
Power Mode
GROSS WEIGHT

EMPTY LOADED
LOADED
UNLOADED

TOTAL RESISTANCE (GRADE + ROLLING) (%)

RIMPULL

TRAVEL SPEED

TRAVEL PERFORMANCE
To determine travel performance: Read from gross weight down to the percent of total resistance. From
this weight-resistance point, read horizontally to the curve with the highest obtainable speed range, then
down to maximum speed. Usable rimpull depends upon traction available and weight on drive wheels.

GRADE DISTANCE: CONTINOUS DESCENT

RETARDER PERFORMANCE GROSS WEIGHT
0 20 40 60 80 100 120 140 160 180 200 x103 kg
To determine brake performance:
These curves are provided to
EMPTY LOADED
establish the maximum speed and
TOTAL RESISTANCE (GRADE + ROLLING) (%)

gearshift position for safer descents

on roads with a given distance.
Read from gross weight down to the
percent of total resistance. From this
F1
Optional exhaust retarder
weight resistance point, read hori-
zontally to the curve with the high-
F2 -20
est obtainable speed range, then
down to maximum descent speed F3
-15

the brakes can safely handle without F4 -10

exceeding cooling capacity. F5

F6
-5
F7

0 10 20 30 40 50 60 70 80 90 100 km/h
TRAVEL SPEED

16
 OFF-HIGHWAY TRUCK
HD785-7

GRADE DISTANCE: 450 m GRADE DISTANCE: 600 m

GROSS WEIGHT GROSS WEIGHT

0 20 40 60 80 100 120 140 160 180 200 x103 kg 0 20 40 60 80 100 120 140 160 180 200 x103 kg

EMPTY LOADED EMPTY LOADED

TOTAL RESISTANCE (GRADE + ROLLING) (%)

TOTAL RESISTANCE (GRADE + ROLLING) (%)

Optional exhaust retarder Optional exhaust retarder
F1
F1

F2 F2
-20 -20

F3 F3
-15 -15
F4 F4
F5 -10 -10
F6 F5
F7 F6
-5 F7 -5

0 10 20 30 40 50 60 70 80 90 100 km/h 0 10 20 30 40 50 60 70 80 90 100 km/h

TRAVEL SPEED TRAVEL SPEED

GRADE DISTANCE: 900 m GRADE DISTANCE: 1.500 m

GROSS WEIGHT GROSS WEIGHT

0 20 40 60 80 100 120 140 160 180 200 x103 kg 0 20 40 60 80 100 120 140 160 180 200 x103 kg

EMPTY LOADED EMPTY LOADED

TOTAL RESISTANCE (GRADE + ROLLING) (%)

TOTAL RESISTANCE (GRADE + ROLLING) (%)

Optional exhaust retarder Optional exhaust retarder

F1 F1

F2 F2
-20 -20

F3 F3
-15 -15

F4 F4
-10 -10
F5 F5
F6 F6
F7 -5 F7 -5

0 10 20 30 40 50 60 70 80 90 100 km/h 0 10 20 30 40 50 60 70 80 90 100 km/h

TRAVEL SPEED TRAVEL SPEED

17
 HD785-7 O F F - H I G H W A Y TR U C K

MACHINE DIMENSIONS

18
 OFF-HIGHWAY TRUCK
HD785-7
SERVICEABILITY AND CUSTOMER SUPPORT
The Komatsu dealer network guarantees you the lowest
operating costs

When you purchase Komatsu equipment, you gain access to a broad range of programmes and services that have
been designed to help you get the most from your investment. These all support substantial productivity, long and
useful equipment lifetime, low operating costs, and a high trade-in or resale value.

• Many of the vital components in the HD785-7 have

been installed and proven totally reliable in other
heavy-duty Komatsu earthmoving equipment.

• Komatsu’s extensive parts warehouses and logistics

system across Europe and around the globe ensure
unparalleled parts availability.

• Continuous training programmes for Komatsu service

personnel guarantee that your equipment is serviced
properly and maintained in top running condition.

• The Komatsu Oil Wear Analysis (KOWA) programme

offers sophisticated oil analysis to identify problems to
be followed up during preventative, scheduled
maintenance.

• KFWP (Komatsu’s Flexible Warranty Programme) is

available, providing a range of extended warranty op-
tions on the machine and its components. These can
be chosen, based on individual needs and activities.
This programme is designed to help reduce total
operating costs.

• A Komatsu Repair & Maintenance Contract is a way

to establish a fixed operating cost and ensure optimal
machine availability for the duration of the contract.

19
HD785-7

OFF-HIGHWAY TRUCK
STANDARD EQUIPMENT
ENGINE • Sun visor SAFETY EQUIPMENT • Satellite communication system for
• Komatsu SAA12V140E-3 engine, • Sun visor, additional • Anti-pitching 4-wheel oil-cooled VHMS
EPA Tier II compliant • Tinted glazing multiple-disc retarder (AP-FOUR) • Payload meter function on VHMS
• AISS (Automatic Idling Setting • Pre radio installation • Back-up alarm • KOMTRAX™ Komatsu Tracking
System) • Cigarette lighter, ashtray, cup holder, • Horn, electric System
• Engine power mode selection space for lunch box • Coolant temperature alarm and light
system with VHPC • Windshield washer and wiper (with • Hand rails for platform REGULATIONS
• Alternator 90 A/24 V intermittent feature) • Ladders, left and right hand side • Complies with EC requirements
• Batteries 4 × 12 V/170 Ah • Supplementary steering, automatic
• Starting motor 2 × 7,5 kW LIGHTING SYSTEM • Overrun warning system BODY
• Back-up light • ARSC (Auto Retard Speed Control) • Body exhaust heating
CAB • Hazard lights • Rearview mirrors • Cab guard (left hand side)
• ROPS cab with FOPS, • Headlights with dimmer switch • Underview mirrors • Spill guard, 300 mm
sound suppression type • Indicator, stop and tail lights • Rear view camera and monitor • Platform guard (right hand side)
• Two doors, left and right • Front stairway with handrails
• Air conditioner GUARDS AND COVERS TYRES
• Electronic maintenance display/ • Exhaust thermal guard OTHER • 27.00-R49
monitoring system • Fire prevention covers • Centralized greasing
• Electronic hoist control system • Engine underguard • Electric circuit breaker, 24 V
• Operator seat, reclining, air • TM underguard • PM service connections
suspension type with retractable • Drive shaft guard (front and rear) • Poor fuel arrangement
78 mm width seat belt • Engine side covers (water and dust)
• Passenger seat with seat belt • Lockable fuel cap and covers • Fuel tank with fast fill coupler
• Power window (l.h.) • VHMS (Vehicle Health Monitoring
• Steering wheel, tilt and telescopic System)

OPTIONAL EQUIPMENT
CAB LIGHTING SYSTEM ARRANGEMENTS TYRES
• Heater and defroster • Rear working lights, left and right • High-capacity batteries • 31/90 R49
• Cassette-radio • Fog lights • Cold area arrangement
• Power window (r.h.) • Back-up light, additional (-30 °C to 40 °C)
• LED combination lights, rear • Sandy and dusty area arrangement
BODY
• Body liners SAFETY EQUIPMENT OTHER
• Muffler without body heating • ABS (Anti-lock Braking System) • Auto greasing system
• Muffler with body heating • ASR (Automatic Spin Regulator) • Engine coolant heater
• Quarry body • Exhaust retarder • Engine oilpan heater
• Tyre stopper block • Three-mode automatic
hydropneumatic suspension

Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsueurope.com

EESS018602 01/2010 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.

Printed in Europe – This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.