Leica Geosystems

Intelligent solutions for

heavy construction

leica-geosystems.com
 TABLE OF CONTENTS

Intelligent jobsite
ConX 4
PA10 6
iCON office 8
HxGN Smartnet 9

Off-machine
iCON site 12
Tablets 14
GNSS antennas 16
Total stations 20

On-machine
Panels 24
Excavate 28
Grade 40
Rig 58
Compaction 70
Pave 86

Services
Customer Care Package 88

2 3
 Leica ConX
Gain the ultimate transparency into your construction
activity and monitor progress in real time from
anywhere on any device.

Leica ConX
Easily visualise and share data through a ■ Monitor the cut and fill situation in real-time ■ Aggregate measured points from all connected sensors

powerful cloud solution and web interface ■ Visualise designs localised on a 3D project map for quick in real time
and easy data validation ■ Simple tools for analysing measured point data by
This cloud-based collaboration tool allows ■ Assign and automatically share designs and updates to source, time and design
you to efficiently manage all your connected 3D machines and surveyors ■ Powerful real time cut and fill analysis tool for monitoring
construction projects and to share job- ■ Connect Leica desktop applications to ConX projects for project progress
related data with all stakeholders. Leica direct field and office data sharing ■ Current and historical volume calculating for automated
ConX enables you to visualise and validate ■ Minimise downtime with immediate remote support and project productivity analysis and reporting
localised reference models, survey data and trouble shooting
constructed data with powerful analysis tools
for monitoring and reporting site productivity.

4 5
Leica PA10 – Personal Alert AWARENESS
PA10 is a proximity detection
system to provide information
Leica PA10 is an innovative solution from Leica Geosystems that combines a tag worn by personnel moving around on about pedestrians around
foot one that communicates with machines on a heavy construction site. The goal is to create awareness for machine vehicles and machines on
operators and pedestrians and create a safer working environment. a heavy construction site.
PA10 creates awareness for
operators and pedestrians
about their surroundings.

ALERT SIGNALS
Signal propagation time is
measured between anchors
installed inside machines/
vehicles and battery-powered
tags worn by pedestrians. The
PA tag provides audio, visual
and haptic feedback to the
pedestrian, and the anchor
provides visual and audible
feedback to the machine
operator or driver.

LONG-RANGE
PA10 is based on the latest
Ultra Wideband (UWB)
time-onflight technology
that provides ranges up
to 40 m with +/-20 cm
accuracy without separate
RF link. It provides situational
awareness and reliable alerts
even under roof and closed
spaces where GNSS coverage
is limited or unavailable e.g.
workshop, quarries.

Scalable
PA10 can be used for all machines and vehicles on a heavy
construction site. The system provides three configurable alert
distances around the machine or vehicle. PA10 is scalable from a
single anchor up to 7 anchors on the vehicle.

6 7
iCON office – Speaks the language of HxGN Smartnet – GNSS data over the
your design data world’s largest reference station network
The Leica Geosystems philosophy is to use the shortest possible path from design to field. By working in close co-operation HxGN SmartNet is an integrated 24/7 GNSS network RTK and GNSS correction service, built on the world’s largest
with local and international design software suppliers Leica Geosystems has produced an application that can import and reference network, enabling GNSS-capable devices to quickly determine precise positions.
export data formats that have become de facto industry standards as well as many data formats that are used only in specific
regions. These formats include, amongst others:

■ AutoCAD DWG and DXF ■ Microstation DGN ■ MX / Moss

■ IFC ■ LandXML ■ REB

Direct connection to field units via Leica ConX Calculate as-built cost estimates using volume analysis
iCON office provides a seamless data flow from The optional Leica iCON office terrain model module allows accurate
office to field through an API integration to Leica surface to surface or surface to elevation volumes for cost estima-
ConX. Available machines and their locations can be tion purposes. This module allows complete control of the surface
displayed in iCON office. The integration also allows models used for calculation including boundaries and breaklines.
sharing of design and as-built data directly between The module may also be used for creating terrain profiles and
iCON office and equipment on site. sections.
The service is provided continuously by a highly HxGN SmartNet was built to provide high-precision,
Work with a range of different design models Easy and quick quality control reporting available infrastructure and professional support high-availability network RTK corrections for any
Different design entities from simple road align- Leica iCON office offers various standard reports for quality control team with more than 10 years of experience application, using any constellation, while at the same
ments to more complex road stringline, cross-sec- reporting. For example, a statistical check and tolerance report of reliably delivering the service. HxGN SmartNet is an time being open to all. With easy access to precise
tion or layer models as well as digital terrain models deviations with respect to a design surface can be created at the open standard correction service, able to use with correction data, Network RTK users experience the
and background maps may be used with Leica iCON click of a button. any GNSS device, and is constantly monitored for best availability, reliability and traceability using
office. integrity, availability and accuracy. With more than internationally recognised standards, together with
Save time and costs
4,500 reference stations based on Leica Geosystems flexible and affordable subscription options that
Send your design data to all of your machines The Leica iCON office package has an easy to use interface that technology that ensure position accuracy in any meet the needs of the local market. With a robust,
and sensors from one package allows you to be up and running in a short period of time. Use the application, HxGN SmartNet is easy-to-use and traceable and repeatable network RTK correction,
Leica iCON office is compatible with many different self-training package delivered with the software or take advan-
provides the fastest precise positions. users can expect centimetre-level accuracies.
machine control systems. The software supports a tage of one year’s free technical support that is included with the
Quality of service is guaranteed through our highly
range of machine control systems and measurement licence. In addition to the simple user interface, Leica iCON office
sophisticated data centre and monitoring systems.
sensors from Leica Geosystems as well as other works the way you are used to, using the built-in AutoCAD® engine
manufacturers. to open and edit native AutoCAD® drawings.

8 9
 Off-machine solutions
Invest in the solution you need today and have the flexibility to expand your product
portfolio based on your future needs tomorrow.
Maximise your investment with flexible hardware and software solutions that allow
you to carry out critical positioning tasks with confidence. These on-the-ground
solutions not only increase your efficiency, but your peace of mind as well.

iCON field Tablets Smart- Robotic

software Antennas total stations

10 11
Leica iCON site – Profit from your Leica iCON site for foremen – Take the
investment guesswork out of your project
With the Leica iCON site field solution you can increase efficiency and quality of work on site. The Leica iCON field Supervisor
and Foreman kit from Leica Geosystems gives you instant real time access to project statistics in the field, allowing
Leica iCON prep Leica ConX
you to make informed decisions quicker than ever before. Instantly increase site productivity by checking the efficiency of
Simple tool to verify field data in the office Data preparation, verification and transfer
your machines and site personnel with an easy-to-use in-cab display, make checks on whether your project is on time, on
by using the same iCON site user interface of simple to complex projects
budget and on specification. With iCON site software you can carry out accurate as-built checks, grade checking and volume
calculation.

Leica iCON gps 70 series Leica iCON CC70 & CC80

Ultimate construction GNSS Rugged, lightweight controllers
rover series with optional tilt for uncompromising site work
compensation

Leica iCON gps 60 Leica iCON iCR80

Versatile smart antenna for High-end robotic total station

multi-purpose positioning tasks with capability of machine
control applications

Leica iCON gps 30

Entry-level GNSS RTK rover
for construction

■ Real-time project information and

statistics in the field
■ Update site personnel with new

User interface customised for Exceptional application design files and work orders
■ Minimise errors and avoid costly
construction personnel functionality rework
■ Increase machine utilisation and save
iCON site is designed to increase your productivity and enable you The features and graphical support within iCON site allow you fuel costs by doing the job right the
to adapt to any given scenario on site. If you work with machines to carry out specific tasks on site in an easier, straightforward first time
on site, use iCON site to check your progress to determine if way. Use iCON site for checking dimensions, volumes, positions ■ Calculate the exact volume of
you are working to the correct depth, profile, grade or surface, and the status of key site elements. iCON site allows the user excavated dirt or fill materials needed
without having to wait for an engineer or surveyor to carry out to complete all site related tasks from one measuring device to optimise material savings
these tasks. iCON site is developed to seamlessly integrate with ensuring an effortless process from start to finish. ■ Conduct simple site measurements
any of the Leica iCON sensors and machine solutions. and calibrations without waiting for
Using the same, interchangeable user interface means: ■ Simply measure, stake-out or check site elements without
a surveyor to do the work – reducing
waiting for an engineer or surveyor to do the work for you
machine downtime and increasing
■ You only need to learn its functionality once resulting in less ■ Benefit from quick volumes and checks by using iCON site
productivity
training, increased motivation and significantly reducing your for site navigation on your vehicle
■ Navigate to points-of-interest, such
investment ■ If using 2D machine control, iCON site allows the operator
as control points or site boundaries
■ The ability to exchange hardware and data between on- to mark out the required starting point or boundary of the
machine and off-machine use, projects and site personnel profile to be used on the excavator or dozer
maximises your flexibility and reduces possible downtime

12 13
Leica iCON CC70/CC80 – Real-time
communication on site
Leica iCON CC70/CC80 versatile tablet PC’s are designed to transport a user’s office directly to the field.
The rugged, lightweight devices have a clear and easy-to-use 7” touchscreen designed to facilitate with data collection tasks
on site, while at the same time communicating with the central office, real-time data transfer is made easy.

Leica iCON CC70 LEICA ICON CC70/CC80

■ Leica iCON CC70/80 controller series are the world’s thinnest and lightest
High-end controller designed for fully-rugged 7” Windows® tablets and feature a battery life of up to 16
standard construction measure and hours
stakeout tasks
■ Large 7” sunlight readable touchscreen display for convenient operation
■ Windows 10 multi-lingual, multi-touch operating system

Leica iCON CC80 ■ Various wireless communication possibilities (Bluetooth®, Wi-Fi and
integrated 4G/LTS multi-carrier mobile broadband) for use with different
Rugged premium controller with sensors and internet access
maximum performance to boost all ■ The CCD17 Bluetooth® radio kit extends the robotic working distance
site tasks to improve productivity between the CC70/CC80 tablet computers and Leica iCON or Nova total
without compromises stations

14 15
Leica iCON gps 30 – Compact and Leica iCON gps 60 – Smart positioning on
trustworthy GNSS RTK rover for construction any construction site
Leica iCON gps 60 is a versatile SmartAntenna for all construction positioning tasks. Featuring superior GNSS technology
Take the first step into Leica iCON construction workflows with Leica Geosystems’ and various integrated communication options, it meets all your requirements for reliable and accurate measurements.
entry-level GNSS RTK rover. The iCON gps 30 is designed to assist construction ■ Entry-point into Leica iCON Its intuitive display shows full status information of the instrument, simplifying operation and configuration. Leica iCON
companies move forward from traditional, to modern digital stakeout and GNSS performance: Easy to gps 60 also offers exceptional network capabilities allowing you to use RTK network services (Leica SmartNet and other
measurement methods. use and equipped with the networks) for highly reliable, improved GPS positions.
construction tailored Leica iCON
Experience faster workflows, with accurate results and higher efficiency in
site field software, the iCON gps
construction projects, such as utility or road construction. Using advanced RTK
30 facilitates your entry into the
technologies the rover delivers consistently accurate and reliable positions.
Leica iCON GNSS portfolio.
Integrated into the well-established and construction tailored iCON site field
■ Lightest pole weight: The light,
software, the iCON gps 30 speaks the language of construction site professionals.
compact and balanced design
makes it comfortable to use and LEICA ICON GPS 60 SMART
carry in the field. ANTENNA
■ Reliable and accurate ■ Superior GNSS technology for
measurement results: With maximum accuracy and reliability
the highest level of position ■ Features Leica SmartTrack+ and
reliability in its class, the iCON gps SmartCheck+ and Leica xRTK
30 delivers accurate results and ■ Future-proof satellite tracking.
increases productivity. Works with all existing and future
satellite systems
■ SmartLink – bridges RTK
communication gaps up to 10
minutes
■ Multi-purpose GPS solution. Can
be used as construction site
GNSS Base, Rover or NetRover,
in supervisor vehicle on site
and entry level machine control
mounted inside a machine,
increasing machine productivity
■ Unique communication flexibility,
featuring integrated radio,
modem and Bluetooth®
■ System integration made
easy through use of platform
independent SDK (Software
Development Kit) bringing swift
configuration to all
■ Integrated NTRIP Server and
Caster for Internet based
Reference Station
■ No controller required for base
station set-up means you need
less hardware
All-purpose GNSS solution ■ Unique flexible software licencing
and feature upgrade concept
iCON gps 60 is the perfect mobile base station for your construction ■ You can order packages or
site. You don’t need a controller for base station setup. Stream individual licences when you need
corrections over the internet without radio and easily and quickly them, investing when you need to
perform many positioning tasks yourself. Check grade or cut & fill,
stakeout points and lines, and as built checks. Save time and increase
productivity monitoring the grade from your supervisor vehicle on site.

16 17
Leica iCON gps 70 Series – Most efficient
construction GNSS smart antennas
The Leica iCON gps 70 and Leica iCON gps 70 T represent Leica Geosystems’ ultimate GNSS rovers and field solutions
for maximum efficiency. With the iCON gps 70 T you can measure and stakeout points quicker than ever before without
the need to keep the pole vertical and level the bubble. The combination of the latest GNSS technology and inertial
measurement unit (IMU) equips the iCON gps 70 T with permanent tilt compensation and makes it resistant to any
magnetic interference. Being fully calibration-free, the iCON gps 70 T is ready when you are – anytime, anywhere.

PERMANENT TILT COMPENSATION HARDWARE & ERGONOMICS SMARTCHECK+ & SMARTTRACK+

■ Calibration-free ■ Compact and lightweight housing ■ Unique RTK technology provides
■ Resistant to magnetic ■ UHF radio continuous checks to guarantee
interferences ■ Tilt and non-tilt variant correct results
■ Increased measurement ■ Initialisation within seconds
productivity and reduction of ■ Complete reliability
human error ROBUSTNESS FOR DEMANDING
SITES
■ Leica iCON CC70/80 controller ICON FIELD SOLUTION
FUTURE-PROOF GNSS series are the world’s thinnest
TECHNOLOGY ■ Seamless integration into the
and lightest fully-rugged 7”
iCON field solution
■ 555 channels for more signals, Windows® tablets and features
■ Easy-to-use software interface
faster acquisition and improved a battery life of up to 16 hours
and seamless data flow
sensitivity ■ IP66 / IP68 protection
throughout the workflow
■ Intelligent management of multi- ■ Built for extreme temperatures
■ Exceptional application
frequency, multi-constellation of -40°C to +65°C
functionality
signals ■ Fulfils toughest standards
■ Leica ConX cloud-based
■ Intelligent selection to throughout the complete
collaboration tool for real-time
automatically reject reflected or product lifetime
3D data exchange
noisy signals ■ Rugged aluminium housing

18 19
Leica iCON iCR80 – High performance total LEICA ICON ICR80 FEATURES

station for one-person operation ■ Faster prism search by patented

technology, PowerSearch
■ Stable data communication with
long-range Bluetooth® (up to
400 m)
Save time and increase your productivity by doing layout work and as-built checks yourself. With the iCON iCR80 you
■ Easy hand-over control from
don’t need an operator at the instrument. The robotic total station can be operated from the machine or the field
pole to machine and vice versa
controller at the prism pole, at the point you need positioning. ■ ATRplus technology, maximising
the total station’s ability to
remain locked onto your machine
mounted prism
■ “Tune out targets” feature to
ignore other distractions in
the field
■ Fastest re-lock in case of
interrupted line of sight

BENEFITS
■ Obtain the highest accuracy for
machine control of a wide variety
of construction machines, such
as curb and gutter or milling
machines, asphalt or concrete
pavers, and graders and dozers
■ Use iCR80 for machine control
of construction machines when
working inside tunnels or where
GNSS coverage is weak or not
available
■ Work with multiple iCR80 total
stations for automatic leap
frogging of paving machine for
continuous paving and increased
surface quality
■ Use iCR80 for as-built
documentation

Leica iCON iCR80

The Leica iCON iCR80 construction total station keeps its ‘eye’ on only one thing:
the user’s target. Move or place more material per day thanks to ATRplus, the
most robust automated-aiming, lock and re-lock technology in the market. iCR80
is especially useful in congested sites with many distractions, such as reflections,
machines and people moving around. Challenging and changing site conditions
should not be an obstacle.

The iCON iCR80 guarantees efficiency with the most reliable, simple and automatic
set up procedure and industry-leading prism lock. This sophisticated, one-person
total station offers an ‘all-in-one’ solution for every purpose – especially the
difficult ones, allowing you to speed up your workflow.

20 21
 On-machine solutions
Increase accuracy, productivity, and uptime with Leica Geosystems’ machine control
solutions. With a powerful feature set and real-time designs sent straight to the
machine, avoid rework, material waste, and reduce crews needed on site – meaning a
safer work zone.

Excavator Dozer Grader Wheel loader Driller Piler Compaction Asphalt paver Milling Concrete paver
solution solution solution solution solution solution solution solution solution solution

22 23
 Leica MCP80 and MC1 – One panel, one Leica MCP80 – One panel, complete control
software, always connected
The new Leica MCP80 can handle all 3D applications in heavy construction. You can easily move your panel from machine
to machine no matter the application. The new Leica MDS series in-cabin docking stations will store your calibration
values and hydraulic parameters for worry-free machine swapping. These docking stations require no long-winded
setups when switching panels. And at an IP67 rating, these are truly the most resilient docking stations for the heavy
construction industry.

MCP 80 is available for:

Excavator Dozer Grader Wheel Driller Piler Compaction Asphalt Miller Concrete
loader paver paver

One common platform

Optimising the machine fleet MCP80 & MC1 FEATURES
■ Fully cable free
Leica Geosystems delivers an intelligent and intuitive hardware and software combination ■ Easy removal of panel
for the heavy construction industry – the new all-in-one machine control platform ■ P67 environmental rating
consisting of a panel, MCP80, and docking station combined with a new application ■ One common interface
software, MC1, supports multiple machines for heavy construction. across all 3D machine
control applications
One for all Easy to use Robust design Simplified and connected solutions for increasing staff productivity on site and unifying
■ Simple and intuitive user
design data for seamless workflows are essential to keep margin gains and generate
Digitalise your construction site Simple, clean and intuitive user With robust design the Leica interface
profits. With the all-in-one machine control platform, Leica Geosystems delivers a unique,
with one software and one hard- interface with interactive user MCP80 panel and the Leica MDS ■ Easy installation and quick
intelligent and intuitive hardware and software combination for the heavy construction
ware platform. Switch from one design adapted to your needs. series docking station are pre- setup for operators
industry.
machine to another and build The assistive technology with pared for the harshest environ- ■ Rugged design of cradle and
complex designs with simpler wizards and help functions help ment and are truly resilient for Leica Geosystems’ solution for heavy construction applications offers a unified hardware panel
workflows and less downtime. you drive the machine and get the heavy construction industry. platform with common software interface across our machine control portfolio. ■ Docking station with
Interchangeable between several heavy construction machines, the Leica MCP80 control onboard memory
more work done with high quali-
unit integrates into the common software platform, Leica MC1, while Leica ConX, the ■ One software for all for
ty and less rework.
cloud-based and user-friendly productivity platform for increased project efficiency, easier operation
rounds off Leica Geosystems’ goal to achieve a digitised construction site.

24 25
2D panel – One panel, multiple machines PowerSnap™ Technology
The Leica Machine Control solution allows you to easily interchange, customise, and upgrade system components in Use your panel on several machines in your fleet without the hassle of installation. This cable-free configuration allows
order to provide you with the most flexible and cost-efficient solution on the market today. for simple and fast exchange of panels between different 2D machines. The cradle is installed once and stores machine
specific settings.

2D panel is available for:

BENEFITS OF 2D
■ Rapid interchange of control panels between machines
■ One cradle for all iCON 2D excavate and iCON 2D grade panels
■ Easy removal of core components for overnight security
■ Contact and cable-free connection to control/display panels
■ Unique patented Snap-On & Snap-Off capability
Excavator Dozer Grader

26 27
 Excavator solution
From simple slope grading, to blind and submerged cuts, and everything in between, our versatile machine control
solutions provide your excavator operators with design models right in the cab. The easy-to-operate user interface
means your operators can jump on it with little training and get optimal results. Grade check without a surveyor with our
robotic total station guidance or our GNSS setup for advanced control. And at the end of the day, the core components
snap off for maximum security.

Leica iCON iXE1 Leica iCON iXE2 Leica iCON iXE3

Even for the not so Our 2D solution gives the For those who need
complex excavating tasks, operator high-accuracy the ultimate precision
the 1D guidance solution dual slope and level guidance, the 3D machine
provides far superior laser control for maximum control solution is
guidance over traditional utilisation of your available. Work from 2D
practices. machine from the start. and/or 3D digital models
for supreme accuracy and
the most complex designs.

28 29
Leica iCON iXE3 – The future of excavating Excavator 3D solution – Full 3D and 2D
control of your excavator
The iXE machine control solution guides the operator using reference models and GNSS in 3D. Design information and
real-time cut/fill indications are displayed in the cab on your control panel, allowing you to rapidly excavate to the
reference design. The solution ensures more uptime and operator satisfaction while increasing safety and productivity. Boom sensor
MSS401

Work with a wide range of popular data formats including LandXML, DXF, GEO, KOF, L3D, LMD, LIN, MBS and TRM ConX
formats. The operator can use the function Create Model to make even complex models directly on the panel without Docking station
MDS series
leaving the cab and without the assistance of a surveying engineer. Control panel
MCP80

*Stick sensor
MSS403 *Boom sensor
for dual boom
MSS402

*Remote
display

Stick sensor with

laser receiver GNSS antennas
MSS404 SL CGA60

Bucket sensor
MSS405

*Compass
MRS300 for 2D mode

*Tilt sensor
MSS406

*Radio Dual GNSS receiver Pitch & roll sensor

modem iCON gps 82 MSS400

Other available options:

Prism & compass configuration

Simple user interface

Assisting the excavator operator’s workflow

The iXE3 machine control solution guides the operator

using reference models and GNSS in 3D. The user
interface, with excavator relevant functions and
wizards keep the operator in the run screen and
assists him through the workflows to keep a targeted
attention to the job at hand.

30 31
Leica iCON iXE2 – Single/dual slope and Excavator 2D solution
depth control
Boom sensor
This multifunctional 2D control system is designed to make excavating easier and more productive. It allows multiple MSS401
elevations and slopes to be constructed, at any orientation, without resetting the machine or laser height reference.
PowerSnap
cradle
iCON iXE2
panel

*Stick sensor
MSS403 *Boom sensor
for dual boom
MSS402

*Remote
display

Stick sensor with

laser receiver
MSS404 SL

Bucket sensor Compass

MSS405 MRS300

*Tilt sensor
MSS406

Junction box Pitch & roll sensor

XJB/16 MSS400

Leica iCON iXE2 BENEFITS OF ICON IXE2

The Leica iCON excavate iXE2 displays the bucket’s actual ■ Upgrade to 3D by adding a GNSS receiver and 3D
position relative to design elevation and slope, allowing control panel.
you to reach the design grade faster. ■ High-accuracy dual slope and level control via the
This multi-functional 2D machine control solution is rotation sensor
designed to make excavating easier and more productive. ■ Real-time cut/fill indication on the graphic display
It allows multiple elevations and slopes to be constructed, ■ No grade checking needed
at any orientation, without resetting the machine or laser ■ No more over excavations
height reference.

32 33
Leica iCON iXE1 – Simple single slope Excavator 1D solution
control solution
Boom sensor
This is the ideal solution for contractors who want to start with machine control. Its easy-to-use single slope control MSS401
panel is designed specifically for standard excavating applications. PowerDigger Lite
iXE1 panel

*Boom sensor
for dual boom
MSS402

Arrow display

Stick sensor with

laser receiver
MSS404 SL

Bucket sensor Compass

MSS405 MRS300

Junction box Pitch & roll sensor

XJB/16 MSS400

Leica iCON iXE1 SYSTEM FEATURES

KEY BENEFITS OF ICON IXE1 ■ 3.5“ colour graphic display
The Leica iXE1 is a simple, economic excavator
■ Easy single slope and depth ■ Simple menu structure - very easy-to-use
control system that’s perfect for backhoes
■ Increase machine productivity ■ Remote display supported
and mini excavators. This single slope control
■ Graphical cut/fill indication in ■ 100 % waterproof (IP68) – no special sensors
panel can even tackle difficult tasks like blind
the cab or cables needed for underwater use
cuts or digging underwater. The iXE1 has the
■ No more over excavations ■ Offset your reference surface
flexibility to work from different references
■ Get done in fewer passes ■ Visual and audio guidance according to
such as existing surface, string line, or a laser
■ No batteries to charge reference height
reference.

34 35
iXE CoPilot – Automatic tilt rotator control Leica TRM – Automatic Tool Recognition
Using the Leica iXE CoPilot, the excavator operator only needs to concentrate on controlling the digging movement Use tool recognition to automatically select the right tool for your excavator or wheel loader. Tool recognition modules
(boom, stick and bucket) while the tilt and rotation function of the tilt rotator is adjusted automatically based on the are mounted on the excavator buckets and tilt rotators. The hub in the cabin registers and sends signals to the machine
reference model surface under the bucket. control solution when the bucket is taken off, a new bucket is selected and sends warnings if a bucket that is not
The operator maintains control of the bucket rotation allowing him to manage material in the bucket properly but calibrated is selected.
eliminating the constant manual adjustment of the slope of the bucket. Enabling the CoPilot by imply pressing a button The operator no longer needs to manually change settings when changing work tools. This minimises the risk of using
simplifies the use of tilt rotators regardless of training level reducing operator fatigue. the wrong bucket and the subsequent over or under digging and costly rework. Besides supporting the attached tools,
the tool recognition system also supports standard tilt buckets and detachable tilt rotators.

36 37
 Submersible configuration – Underwater
excavating
As part of the MSS400 series, the MSS420 sensors for underwater dredging jobs are built on the well-established
MSS400 Series Sensor technology. Ensuring speed, performance, precision and productivity (SP), the MSS400 Series
Sensors incorporate SP Technology that allows faster digging without loss of precision at higher speeds, dramatically
increasing machine utilisation and productivity.

Reinforced cabling, sensor

housing and bracket
Designed to be used down to 40 m at 5 bar pressure, the MSS420
sensors are equipped with reinforced components such as
pressure tight connectors, a robust sensor housing, rugged cabling
and stainless-steel brackets making it the most reliable equipment
for underwater applications. The Leica MSS420 dredging sensors
can be programmed to boom 1, boom 2, stick, bucket and even
tilt sensors.

38 39
 Dozer solution
With our machine control solution for dozers, you can tackle any task from small road jobs and creation of parking
lots, to large industrial sites or highways projects. Our solutions give the operator proficiency with little training and
an easy-to-use yet powerful interface. Choose the entry-level 1D solution with CoPilot that offers you automatic blade
control or pair our flexible solutions with a rotating laser, total station, or GNSS to tailor to your needs, and optimise
your productivity and workflow on site. Core components can easily be dismounted and reused in other machine control
configurations.

Leica iCON iGD1 Leica iCON iGD2 Leica iCON iGD3

Our entry-level machine control An easy to use machine control Our 3D machine control solutions
solution allows operators to set solution for dozers gives you for dozers with Leica MC1
a desired slope/grade reference, powerful control over your software give you accurate and
and automatically hold that machine. Work with a variety of independent control of your
slope/grade without the need for different sensors and make tasks dozer, anywhere on the project
lasers, masts or GNSS. easier. design.

40 41
 Leica iCON iGD3 – Intelligent 3D grading Dozer 3D solution
solution for dozers
Docking station
The iGD3 3D dozer solution opens new dimensions in earthmoving and fine grading. It brings the design surfaces MDS series
and alignments inside the cab. Work independently and accurately anywhere on the project design, guided by GNSS
Control panel MCP80
or total station. Choose between single and dual GNSS or a TPS solution when even tighter accuracy is required. The and MC1 SW
solutions interface with Leica ConX with easy data transfer between office and machines, remote communication, fleet
ConX
management and earthmoving productivity analysis via the the cloud-based ConX website.

Dual GNSS

Dual GNSS receiver

iCON gps 82

Slope sensor
SP14

Leica iCON iGD3 Other available options:

The Leica iCON grade iGD3 solution can

dramatically increase machine utilisation and
productivity and optimise material usage on On-cab configuration
BENEFITS OF IGD3
any earthmoving and fine-grading contract.
■ User-selectable views (e.g. Configure your machine with single or dual GNSS
Plan View, Cut & Fill View) or use a TPS configuration to obtain even higher
■ Visible display screen, even Single GNSS configuration
accuracy.
in sunlight.
■ iGD3 remembers all your
settings Intuitve user interface
■ Scalable from 1D and 2D to Prism configuration
full 3D capability The common software platform, Leica MC1,
■ Create a reference surface offers a clean and simple design with all relevant
with up to four slopes functions made easily accessible directly in the
run screen. Select different run screen views to
fit your needs and the requirements of the job
site.

42 43
Leica iCON iGD2 – Easy-to-use, yet powerful Dozer 1D and 2D solutions
2D dozer machine control
The Leica iCON iGD2 dozer solution provides automatic control of both slope and elevation. When using two masts and PowerSnap
laser sensors, you can work independently of slope direction. Cradle
iCON iGD2
panel
Leica iCON iGD2 can be used with a wide range of sensors and can easily be upgraded to a 3D solution reusing the 2D
sensors and components.

Dual laser receiver

MLS720 or MLS820

*Slope Sensor
MSS1301

Slope Sensor
SP14

Other available options:

Automatic functions
AUTOMATIC TILT FUNCTION Single laser receiver configuration
Stay in permanent control of the dozer
blade. The MSS1301 inclinometer sensor is
BENEFITS OF IGD2 mounted on the machine to detect the tilt
■ Dedicated grade and slope of the blade. CoPilot configuration
adjustment keys
■ Intuitive graphics show the AUTOMATIC HEIGHT FUNCTION
blade’s actual position The MLS720 or MLS820 laser sensors
■ Quick and easy setup for receive the rotating beam of laser light
operator preferences and indicate its position as it strikes the
■ Auto/Manual control mode sensor. This information is then transferred
selection electronically to the control panel for
machine control guidance. The iGD2 can
be installed with either single or dual laser
receivers.

44 45
Leica iGD1 CoPilot – Automatic cut/fill On-Cab configuration - for iGD3 dual GNSS
control on your dozer The iGD3 dual GNSS solution is optionally available with on-cab mounted antennas for advanced personnel safety and
reduced wear and tear of the equipment. Benefit from increased versatility with customer-focused mounting options.
The iGD1 CoPilot configuration allows the dozer operator to grade to specification, regardless of their training level. It This configuration means that the antennas are roof mounted on the cabin and not on the dozer blade. The advantage
automatically adjusts critical parameters for more accurate grading results. Make straight, smooth passes without any of this new configuration is that there are no external masts and cables and gives the operator better visibility.
waves on all your grading or material moving tasks.

BENEFITS OF IGD1 COPILOT BENEFITS OF ON-CAB

■ Ensures correct grades ■ No need to climb onto the
without washboard blade for installation
surfaces ■ Increased field of view for the
■ Works without a rotating operator
laser, total station, or GNSS ■ Eliminated risk of damage on
■ Less rework, wear and tear, masts, cables and antennas
and training effort ■ Enhanced versatility – mount
■ Provides a safer work the antennas on the blade or
environment onto the cab

46 47
 Grader solution
When using your grader for any application from cutting ditches to grading side slopes, our machine control solutions for
motor graders are at your service. With an easy-to-use, easy-to-learn interface, your operators will work directly from 3D
design models right inside the cab. Real-time cut and fill information means fewer passes, less rework, and no surveyor
needed to check grade. When you’re done, swap your components to another machine or put them away for safety.

Leica iCON iGG2 Leica iCON iGG3

Our 2D solution for motor Get better insight into your

graders is the perfect entry point job when you can work from
for those looking to get into the digital design surfaces and
machine control. Get right to alignments right inside the cab.
grade the first time. The perfect solutions for all
grading applications.

48 49
Leica iCON iGG3 – efficient and flexible Grader 3D solution
solution
Let operators utilise the true potential of their machines for a wider range of applications, by moving materials in any Docking station
way they want. Operators can now finish jobs faster, with drastically reduced downtime and complete more tasks with MDS series

their motor grader than ever before. Control panel

MCP80 and Leica MC1 SW

The single or dual GNSS solutions for guided or automatic machine control for motor graders gives the operator a huge
range of configurations to fulfil any customer need. Use the TPS configuration to obtain even tighter accuracy. ConX

Dual GNSS receiver

iCON gps 82

GNSS antennas

Slope sensor
MSS1300

*Mast tilt sensor

MSS405

Leica iCON iGG3

single GNSS Other available options:
Optimise material usage on any earthmoving
and fine-grading contract with the iGG3. Bring
the design surfaces and alignments virtually Single GNSS configuration
in the cab – breaking you free from stakes or
hubs.

BENEFITS OF IGG3
■ Auto/Manual information Leica iCON iGG3 Prism configuration

dual GNSS/TPS
directly on screen
■ User definable views (e.g.
Plan View, Cut & Fill View)
■ Visible display screen,
The iGG3 machine control solution for motor
even in sunlight graders automatically controls the blade while
■ Expand your system
you focus on placing the machine in the optimal
simply by adding position. It controls both ends of the blade for
components you so you can focus on manoeuvering. Choose
the TPS configuration for millimetre-accuracy
control of the blade, which is ideal for fine
grading applications.

50 51
Leica iCON iGG2 – Scalable 2D entry solution Grader 2D solution
The iGG2 provides automatic control of both slope and elevation. When using two masts and laser sensors, you can
work independently of slope direction and get to the grade faster than before. The trisonic sensor follows a curb or a
stringline and integrates with the hydraulic control of the motor grader for automatic side shift of the grader blade. PowerSnap
cradle
iCON iGD2
panel

Rotation sensor
MRS130X

Laser receiver MLS720

or MLS 820

*Sonic sensor
SH2

Slope Sensor Trisonic sensor

MSS1300 MUS1400

Other available options:

BENEFITS OF IGG2
■ Easy-to-use graphical display
Leica iCON iGG2 Dual laser receiver configuration

– the same panel is used on

The Leica iCON 2D grade solutions
your 2D dozers and graders,
for motor graders offer new site
giving you the ultimate in
preparation possibilities. The system
equipment flexibility
regulates the elevation and cross
■ Short learning curve thanks
slope by means of robust and high-
to intuitive software
tech sensors. The system helps you
■ The wireless panel makes it
improve your productivity as well as
easy to place and remove
save material costs.
from the cabin

52 53
 Wheel loader solution
Keeping your earthmoving tasks efficient safeguards your bottom line. Our solution for wheel loaders provides the
operator with precision guidance so that they can get to grade the first time.

Leica iCON iGW3

Make earthmoving with your wheel loader easier by adding 3D

machine control. With guidance in the cab, you can make sure
you’re on grade the first time – saving you time and money on your
earthmoving tasks.

54 55
Leica iCON iGW3 – Increased efficiency for Wheel loader 3D solution
wheel loaders
Docking station
Experience the unique benefits of Leica iCON iGW3 machine control for your wheel loader. Get your earthwork jobs MDS series
done faster and right the first time. Save time and costs by reducing rework and eliminating over excavating and grade Control panel
MCP80
checkings.

ConX

Dual GNSS receiver

iCON gps 82

GNSS antennas
CGA60

Pitch & roll sensor

MSS400

Bucket sensor
MSS405

*Tilt sensor
MSS406

Stick sensor
MSS403

Leica iCON iGW3 BENEFITS OF IGW3

■ Maximise your machine utilisation and return on
The Leica iCON grade iGW3 wheel loader system
investment from day one - get the grade right from the
provides the real-time positioning of the bucket,
start
allowing the operator to apply instantaneous
■ Eliminate over excavation and costly material overruns
adjustments of the bucket position. The system
■ Operator-friendly user interface reduces training time
uses 3D design models and state of-the-art GNSS
and cost
technology. Design information and real-time cut and
■ Intuitive user interface provides additional confidence
fill indications are displayed on the control panel in
and high productivity
the cab for easy and productive operation. The user-
■ Reduces labor costs by decreasing or eliminating grade
friendly interface with graphical colour display provides
checks
full guidance and allows easy operation.

56 57
 Pile driver solution
Maximise safety and cost savings with a Leica Geosystems piling solution. High efficiency piling makes you more
productive and enables you to use fewer people onsite, allowing you to optimise your resources. With applied
documentation being automated, there is no need to survey the finished project. Save time and costs with automated
navigation between piles and monitor your project progress through Leica ConX from the comfort of your office. All in
all, our piling solution shortens project time and increases your efficiency.

Leica iCON iRP3

The piling solution offers a standard tower or body-mounted GNSS

piler configuration in combination with an array of sensors for piling
of precast concrete piles, sheet wall and ground stabilisation.

58 59
Leica iCON iRP3 – Increase efficiency and KEY BENEFITS
■ Huge cost savings and increased safety
due to less people on the site
productivity for pile drivers ■ As applied documentation is
automated, there is no need to survey
the finished project
■ Save time and costs with faster
The Leica iCON iRP3 solution for pilers maximises productivity in piling applications. Piling rigs can be controlled easily from the
navigation between piles
cab via the control panel with 3D design plan. There is no need to manually stake out the positions of the piles or sheets.
■ Check on your projects progress from
the comfort of your office
■ Complete large piling projects in a short
time

KEY FEATURES
■ Eliminate stake out – start working
immediately
■ Document pile positions on-the-fly
■ Navigate automatically to nearest pile
■ Get real-time status of project with
Leica ConX
■ Choose between body mounting or
tower mounting of GNSS antennae

ICON RIG BENEFITS

■ One solution for all your drilling and
piling needs
■ Built on the same hardware platform as
all other iCON solutions, one platform
for all your machine control needs
■ Connect entire site with ConX
■ Simple and intuitive user interface
■ Fully customisable 3D views of your
machine and jobsite, see the job
exactly how you want to
■ Quick and easy setup for operator
preferences
■ No need for office software, the iCON
rig software platform accepts several
open 3D data formats

Leica iCON iRP3 Leica ConX

Export the 3D piling plan, upload it to Leica ConX and transfer the file to
the machine and get to work.

The Leica iCON iRP3 piler solution gives you maximum control. Guide your piler
via the GNSS antennas and 3D design plans directly in the cab on the display.
Automatically documenting the work as the project progresses means there’s
no need to survey the finished project.

60 61
Piler 3D solution Exact position, precise results

ConX
Docking station
MDS series
Control panel
iCON site MCP80

*DUS-14 ultra-sound GNSS antennas

sensors for body/tower
mounting

Hinge sensor
MSS405

*Radio Dual GNSS receiver Pitch & roll sensor

modem MSS400

Stick sensor Boom sensor

Select run screen
MSS403 MSS40X Other available options:

Dual TPS and prism configuration

Cylinder view
Simple user interface Bull’s eye view
The operator can choose to show the piler
Split screen view
Full screen with bull’s eye view with the The split screen run screen com-
navigation area being collected into one pattern in a colour-coded cylinder view. Green
The user interface in iRP3 is simple and intuitive with icons and help texts. bines the advantages of both the
single focus area for the operator. When shows that a pile is driven successfully, red
The iRP3 assists the piler operator during the workflow and the run screen bull’s eye view and the cylinder
the operator reaches the target distance shows a failed pile, yellow shows a paused
can be set up to suit the task at hand. view. It assist the operator in the
to the point, the run screen automati- pile and white cylinders show the piles to
piling work and lets the operator
The interface displays the most relevant functions for pilers in the menu cally zooms to the point. be piled. The auto-navigation functionality
keep an eye on the navigation.
for easy access. automatically navigates the operator to the
nearest pile.

62 63
 Drill rig solution
Maximise the productivity of your drilling machines by adding Leica Geosystems machine control. Bring the 3D design
plan right inside the cab to eliminate the dependency on stake outs. Directly supply the operator with a drill pattern
to the machine control panel and navigate via GNSS to your next drilling location. Our innovative drilling solution
allows for drilling of complex patterns and even directional drilling. Work with GNSS antennas along with an array of
sensors for your drilling tasks.

Leica iCON iRD3

Leica iCON iRD3 offers a standard tower or body-mounted GNSS

driller in combination with multiple sensors for surface drill rigs.

64 65
Leica iCON iRD3 – Increase performance, KEY BENEFITS
■ Huge time and costs savings with

accuracy and safety for drill rigs every drilling job

■ Eliminate or drastically reduce stake
out work
■ Wireless update of project files and
remote support via Leica ConX
The imported or created drill pattern guides the operator to the closest hole. When the position is within the horizontal
■ Integration with manufacturers’ on-
tolerances, the operator now only needs to adjust and align the tower so that it fits the chosen hole angle and heading.
board computer system
The navigation is simple: Follow the arrows and numbers on the run screen, and align so that the bull’s eye turns green,
■ Avoid drilling in old and failed holes
and you are ready to drill.

KEY FEATURES
■ Drilling complex patterns is a breeze -
even directional drilling is possible
■ Create drill patterns directly on the
display
■ Log holes on-the-fly and share with
entire site via Leica ConX
■ Choose between body mounting or
tower mounting of GNSS antennae
■ Import drill patterns from Leica iCON
site or Leica ConX

ICON RIG BENEFITS

■ One solution for all your drilling and
piling needs
■ Built on the same hardware platform
as all other iCON solutions, one
platform for all your machine control
needs
■ Connect entire site with ConX
■ Simple and intuitive user interface
■ Fully customisable 3D views of your
machine and jobsite, see the job
exactly how you want to
■ Quick and easy setup for operator
preferences
■ No need for office software, the iCON
rig software platform accepts several
open 3D data formats

Leica iCON iRD3 Leica ConX

The Leica iCON iRD3 driller solution puts you in full control. Guide your driller via the
GNSS antennas and 3D design plans directly in the cab on the display. Automatically
documenting the work as the project progresses allows you to avoid drilling in old
and failed holes.

The Leica iCON iRD3 solution for drills maximises productivity in drilling applications.
Drilling rigs can be controlled easily from the cab via the control panel with 3D
design plan. There is no need to stake out the positions of the holes to be drilled.

66 67
Driller 3D solution Always in control

Boom sensor
MSS401
ConX
Docking station
MDS series
Control panel
MCP80
iCON site
*Stick sensor
*Boom sensor
MSS403
for dual boom
MSS402

GNSS antennas
for body/tower
Stick sensor mounting
with laser
receiver
MSS404 SL
Bucket sensor
MSS405

*Tilt sensor
MSS406

*Radio Dual GNSS receiver Pitch & roll sensor

modem MSS400

Select run screen

Other available options:

Dual prism and TPS configuration

Bull’s eye view Cylinder view Split screen view

Simple user interface Full screen with bull’s eye view with the The operator can choose to show the The split screen run screen combines
navigation area being collected into one drill pattern in a colour-coded cylinder the advantages of both the bull’s eye
The user interface in iRD3 is simple and intuitive with icons and help texts. single focus area for the operator. When view. Green shows that a hole is drilled view and the cylinder view. It assist the
The iRD3 assists the driller operator throughout the entire workflow and the operator reaches the target distance successfully, red shows failed hole and white operator in the piling work as well as
the run screen can be set up to suit the task at hand. Use automatic to the hole, the run screen automatically cylinders show the holes to be drilled. The let’s the operator keep an eye on the
navigation to nearest hole, bull’s eye or cylinder view for easy navigation zooms to the point. Day light and night auto-navigation functionality automatically navigation.
and auto-zoom for increased focus on the task. The interface displays the light modes are available. navigates the operator to the nearest hole.
most relevant functions for drillers in the menu for easy access.

68 69
 Compaction solution

Use the Leica iCON machine control for your soil compactor to get your compaction jobs done faster, more efficient
and right the first time. Save time and costs by avoiding over or under compaction. Achieve smooth compaction
results every time for a long-lasting foundation.

Leica iCON compaction

With the iCON roller, simplicity is key as it helps to monitor and

to document the compaction process while at the same timing
improving the compaction quality and reducing operational costs.

70 71
Leica iCON compaction – Achieve higher
quality in soil compaction
Experience the unique benefits of Leica iCON machine control solutions in your soil roller. Get your compaction jobs done
faster, more efficient and right the first time. Save time and costs by avoiding over or under compaction. Achieve smooth
compaction results every time for a long-lasting foundation.
iCON compaction makes the compaction work for the roller operators easier as they can follow the information on the
screen to reach the target. The office staff can monitor the compaction progress in real time using Leica ConX.

Simple user interface

Wireless transfer of compaction data to ConX for as-built
reporting

Leica iCON compaction for soil rollers is developed to suit the specific
needs of the soil compactor operator. The colour-coded mapping
visualises the pass counts, and the quick accesses allow the operator
to enter the functions that are relevant for the operator’s work tasks.
The solution interfaces with the cloud-solution Leica ConX for reporting
of the quality of work, and data can be exported to advanced post
processing programs such as VETA.

KEY FEATURES
■ Compaction Meter Value (CMV) sensor implemented in iCON
compaction to provide stiffness indication
■ Three use cases available: Pass count, CMV target, delta CMV
■ Wireless data transfer between site and office for real-time
monitoring of work progress
■ Job reports for quality control or payment release via Leica ConX
■ Export of compaction data in ConX into Veta data format for post
process analysis

KEY BENEFITS
■ Easy retrofittable for any roller brand and specification
■ Versatility by supporting single/dual GNSS and total station
position sensors
■ Avoid over and under compaction and save fuel, time and rework
■ Improved job site planning

72 73
 Asphalt paving solution
Save time and costs by avoiding the dependency of string lines. Leica Geosystems offers 3D machine control solutions
for any heavy construction application on your construction site. iCON pave makes the paving work for asphalt operator
and contractor easier and at lower costs. Stringless asphalt paving increases consistency and quality of the surface.

Leica iCON pave asphalt

Third generation paving solution from Leica Geosystems - the 3D

paving pioneer.

74 75
Leica iCON pave for asphalt – 3D machine KEY FEATURES
■ Stringless paving to reduce costs and shorten

control for asphalt paving applications project time

■ Many sensor combinations possible to suit every
paving task
■ Track, view and sync via Leica ConX
Experience the unique benefits of Leica iCON machine control solutions for your asphalt pavers. Get your asphalt paving ■ Automatic leapfrog for continuous paving to
job done faster, more efficiently and right the first time. Save time and costs by avoiding the dependency of string lines. increase quality
iCON pave makes the paving work for asphalt operator and contractor easier and at lower costs. Stringless asphalt ■ Support all main asphalt paver brands
paving increases consistency and quality of the surface. ■ High end version includes working width and
steering control

KEY BENEFITS
■ Asphalt paver ready to pave after reference
upload
■ Stringline inaccuracy eliminated with consistent
paving quality 24/7
■ Lower road maintenance costs due to accurate
paved surface
■ Improved safety for workers on site due to
removal of stringlines

PREPARATION
■ Upload project data (xml files) via Leica ConX
■ Select reference line in project
■ Customise the screen

WORK PROGRESS
■ Monitor work progress on the panel, and adjust
the settings if required
■ Perform as-built checks with spare total station
■ Reposition total station for automatic leapfrog

QUALITY CONTROL
■ Monitor project progress in real time via Leica
ConX
■ Generate as-built documentation
■ Use Leica ConX for remote support

Simple user interface

Assistive user-interface

The Leica iCON pave for asphalt solution is designed to assist the operator
through his work tasks. The quick accesses allow the operator to have the
most important functions at his fingertips e.g. the simple offset change
for elevation and steering, tuning, safety features and selection of total
stations. Measured as-built information is sent to the MCP80 panel and
then synchronised with Leica ConX.

76 77
 Milling solution
Experience the unique benefits of Leica iCON machine control solutions for your milling machines. Get your milling job
done faster, more efficiently and right the first time. Save time and costs by avoiding the manual work of spraying and
typing in of values.

Leica iCON pave for milling

The 3D milling solution from Leica Geosystems ensures a

smooth and even milled surface preparing the ground for later
asphalt paving, saving time and costly asphalt mix. iCON pave
makes the milling work for the operator and contractor easier
and at lower costs.

78 79
Leica iCON pave for milling – 3D machine KEY FEATURES
■ Automatic leapfrog for continuous work process

control for cold planers ■ Many sensor combinations possible to suit every
milling need
■ Track, view and sync via ConX
■ Optional patented 1UP sensor configuration for
The Leica iCON pave milling solution is designed to assist the operator through his work tasks. The quick accesses allows the complex projects like race tracks with slope in
operator to have the most important functions at his fingertips e.g. change offset for elevation and set-up of total stations or curves
GNSS. Measured as-built information is sent to the MCP80 panel and then synchronised with Leica ConX.

KEY BENEFITS
■ Easy retrofittable for any cold planer brand and
specification
■ Correct grade and slope without copying effect
saving fuel, time and avoiding rework
■ Accurate milling surface according to the design
model avoids subsequent over paving with
costly asphalt mix
■ Seamless workflow between milling and asphalt
paving to shorten project time
■ Improved job site planning and safety on site

PREPARATION
■ Upload project data (stringline files) via Leica
ConX
■ Select reference line in project
■ Customise the screen for the required use case
■ Position cold planer for milling start

WORK PROGRESS
■ Start moving the cold planer and mill
automatically to the required level
■ Monitor work progress on the panel
■ As-built checks with spare total station

QUALITY CONTROL
■ Monitor project progress in real time via Leica
ConX
■ Use Leica ConX for remote support

Leica iCON site milling pilot

Entry-level GNSS milling machine guidance

Leica iCON site milling pilot is your first step into digitised GNSS milling.
Control the precise cutting depth and gain from increased productivity,
higher precision and smoother surfaces by moving away from traditional
methods in the re-paving process. Forget about losses in milling quality
resulting from vague or missing spray marks. The iCON site milling pilot
calculates the difference between the existing and the design surface
at the cold planers’ current position. In addition, set values at predicted
points ahead of the current position are calculated.

80 81
 Concrete paving solution

From highways, to tunnels, to airport runways and beyond, the comprehensive Leica Geosystems solution set can be
easily configured to your needs with most industry leading paver manufacturers. Its intelligent automation, industry-
leading positioning, and intuitive user interface deliver unmatched performance – giving you the edge over your
competition.

Leica iCON pave for concrete paving

The ultimate in paving solutions for cold planers, curb & gutter,
placer spreader and trimmer machines.

82 83
Leica iCON pave for concrete – 3D paving KEY FEATURES
■ Simplified data transfer within the same platform as

solutions for concrete pavers all other iCON machine control solutions
■ Intelligent hardware combination of panel and at-
machine mounted cradle storing machine specific
data
Leica iCON pave supports your business with 3D paving solutions from airport paving to tunnel work, curb and gutter ■ Simple and intuitive user interface
jobs or new highway projects. With decades of experience in 3D paving solutions, Leica Geosystems has proven expertise ■ Smooth workflows due to complete Leica iCON
in hundreds of installed and active systems throughout the world and numerous approved interfaces with all main OEMs. product portfolio for any construction site application
Get your paving jobs done faster, more efficiently and right the first time with the concrete paving solution of Leica iCON ■ 1UP sensor configuration combining total station and
machine control solution. prism with dual GNSS system

KEY BENEFITS
■ Consistent and highly accurate pave quality as the
third generation of iCON stringless paving solutions
■ Easy adaption to any job site conditions with
several sensor combinations
■ Continuous paving operation with auto leapfrogging
of TPS
■ Reduced cabling and costs with the new multipoint
radio
■ Supported by Leica ConX for track, view and
synchronisation

PREPERATION
■ Upload stringline road models via Leica ConX
■ Select reference and slope line on the display
■ Customise the run screen
■ Activate multipoint radio
■ Set up total station (auto leap frog)

WORK PROGRESS
■ Monitor material flow while in auto run mode
■ Use quick access keys to off-set/tune set safety
features for job adaptations

QUALITY CONTROL
■ Log as-builts
■ Monitor progress in Leica ConX

Simple user interface

Wizards and help functions

The Leica iCON pave solution offers a new machine calibration wizard
for easy set-up of the machine. Useful help functions can assist the
operator in his work and remote support and communication is helpful
tool for the operator to receive information from the site office or from
a surveyor. The assistive software ensures better communication and
consequently more uptime and productivity.

84 85
Customer Care Packages – Maintenance
contracts
Leica Geosystems Customer Care Packages (CCP) ensure you achieve maximum value from your investment. When you
buy a CCP from Leica Geosystems, you immediately start to benefit from instant access to our network of professional
support and service team while you work. With a range of three different Customer Care Packages, you will be sure to The CCPs are Leica Geosystems’
obtain the package that best suits your particular requirements and budget. From Basic to Silver, Leica Geosystems has maintenance contracts customised for you
the right Customer Care package for your business.
1, 2, 3- or 5-years duration

Customer Support   
Software Maintenance   
Field Service  
Extended Warranty 

Customer Support
Direct telephone and online access to our machine control professionals. They will work
with you to solve any problems that may arise, whether they are operational questions,
solution configuration issues or general advice.

Software Maintenance
Benefit from the latest software improvements and new features keep you and your
solution up-to-date to maximise productivity. Update your software from myWorld or by
talking to your local Leica Geosystems representative about the opportunities.

Field Service
Annual preventative inspection of the solution carried out by experienced technicians
minimises repairs, downtime and ensures reliable machines. The annual Field Service
inspection includes a visual and a system check and check of the calibration measure-
ments. This gives higher up-time and more reliable machines.

Extended Warranty
Leica Geosystems machine control products come with a standard one-year warranty.
The coverage may be extended to a maximum of five years, covering labour and spare
parts. An extended warranty provides the additional security of knowing that unplanned
costs in the future can be avoided.

86 87
 Leica Geosystems – when it has to be right
Revolutionising the world of measurement and survey for nearly
200 years, Leica Geosystems is the industry leader in measurement
and information technologies. We create complete solutions for
professionals across the planet. Known for innovative product and
solution development, professionals in a diverse mix of industries,
such as surveying and engineering, building and heavy construction,
safety and security, and power and plant trust Leica Geosystems for
all their geospatial needs. With precise and accurate instruments,
sophisticated software, and trusted services, Leica Geosystems
delivers value every day to those shaping the future of our world.
Leica Geosystems is part of Hexagon (Nasdaq Stockholm: HEXA B;
hexagon.com), a leading global provider of information technology
solutions that drive productivity and quality across geospatial and
industrial landscapes.

Copyright Leica Geosystems AG, 9435 Heerbrugg, Switzerland. All rights reserved. Printed in Switzerland – 2020.
Leica Geosystems AG is part of Hexagon AB. 888095en – 05.20

Leica iCON iXE3 Leica iCON grade Leica iCON gps 70 series Leica iCON pave
The future of excavating Intelligent grading Speed up – 3D machine control for
solutions anytime, anywhere asphalt paving applications

intelligent CONstruction

KEY FEATURES OF LEICA ICON PAVE

n Stringless paving to reduce costs and shorten project time
n Many sensor combinations possible to suit every paving task
n Track, view and sync via Leica ConX
n Automatic leapfrog for continuous paving to increase quality
n Support all main asphalt paver brands
Experience the unique benefits of Leica iCON machine
n High end version includes working width and steering control
control solutions for your asphalt pavers. Get your
asphalt paving job done faster, more efficiently and right
KEY BENEFITS OF LEICA ICON PAVE
the first time. Save time and costs by avoiding the
n Asphalt paver ready to pave after reference upload
dependency of string lines.
n Stringline inaccuracy elminated with consistent paving quality
24/7
LEICA GEOSYSTEMS MACHINE CONTROL SOLUTIONS
n Lower road maintenance costs due to accurate paved surface
n Simple and intuitive user interface
n Improved safety for workers on site due to removal of
n Easy installation and quick setup for operators
stringlines
n Rugged design of cradle and panel
n Docking station with onboard memory
n One software for all for easier operation

leica-geosystems.com leica-geosystems.com leica-geosystems.com leica-geosystems.com

Leica iCON Leica iCON Leica iCON gps Leica iCON pave
excavate iXE3 grade brochure 70 series asphalt flyer
brochure brochure

Leica Geosystems AG
Heinrich-Wild-Strasse
9435 Heerbrugg, Switzerland
+41 71 727 31 31