S/M No.

Dongbu Daewoo Electronics Service Manual

Auto Washer
Model: DWF-H361ASA
DWF-H361ARA

✔ Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).

Aug. 2014

Downloaded from www.Manualslib.com manuals search engine

 AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

Contents
1. SPECIFICATIONS ....................................................................................................................................2
WASHING MACHINE
2. STRUCTURE OF THE WASHING MACHINE .......................................................................................3

3. DIRECTIONS FOR INSTALLATION AND USE ....................................................................................4

HOW TO INSTALL ON AN INCLINED PLACE .............................................................................4
HOW TO CONNECT THE INLET HOSE .......................................................................................4
HOW TO CLEAN THE FILTER ......................................................................................................5

4. FEATURE AND TECHNICAL EXPLANATION .....................................................................................6

FEATURE OF THE WASHING MACHINE ....................................................................................6
WATER CURRENT TO ADJUST THE UNBALANCED LOAD ...................................................6
AUTOMATIC WATER SUPPLY SYSTEM FOR HEAVY DUTY ..................................................6
AUTOMATIC DRAINING TIME ADJUSTMENT ............................................................................7
AUTOMATIC UNBALANCE ADJUSTMENT .................................................................................8
CIRCULATING-WATER COURSE AND MAGIC FILTER ...........................................................8
MAGIC FILTER ................................................................................................................................9
RESIDUAL TIME DISPLAY ............................................................................................................9
DRAIN MOTOR ...............................................................................................................................9
GEAR MECHANISM ASS’Y .........................................................................................................10

5. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT ................................................................11

GEAR MECHANISM ASS’Y REPLACEMENT ...........................................................................11

6. THE REPAIR METHOD OF GEAR MECHANISM FOR CLUTCH SPRING PROBLEM ................13
THE STRUCTURE OF GEAR MECHANISM ..............................................................................13
HOW TO CHECK THE CLUTCH SPRING PROBLEM ..............................................................14
THE PROCESS OF DISASSEMBLING .......................................................................................15
THE PROCESS OF ASSEMBLING .............................................................................................17
REPLACE THE CASE FILTER ASS'Y .........................................................................................19

7. TROUBLE SHOOTING GUIDE .............................................................................................................20

CONCERNING WATER SUPPLY ...............................................................................................20
CONCERNING WASHING ...........................................................................................................21
CONCERNING DRAINING ...........................................................................................................22
CONCERNING SPINNING ...........................................................................................................23
CONCERNING OPERATING .......................................................................................................24

8. PRESENTATION OF THE P.C.B ASS’Y .............................................................................................25

CONCERNING ERROR MEASSAGE .........................................................................................25

APPENDIX ..................................................................................................................................................26
WIRING DIAGRAM .......................................................................................................................26
PARTS DIAGRAM .........................................................................................................................27
PARTS LIST ...................................................................................................................................31

Downloaded from www.Manualslib.com manuals search engine

 1. SPECIFICATIONS

NO. ITEM DWF-H361ASA / DWF-H361ARA

1 POWER SOURCE AVAILABLE IN ALL LOCAL AC VOLTAGE AND CYCLE

2 POWER CONSUMPTION 600W

PUMP
3 MACHINE WEIGHT
49kg(108 lb)

4 DIMENSION (WXHXD) 630 X 1075 X 670(mm), 24.8 X 42.3 X 26.38(inches)

FULL AUTOMATIC 8 COURSES

5 WASHING COURSE (Smart Wash, Delicates, Normal, Tub Clean, Heavy Duty, Extra Duty, Eco
Wash, jeans)

6 WATER CONSUMPTION 232 L

HIGH 88 L

MEDIUM 73 L
7 WATER LEVEL SELECTOR
LOW 58 L

E.LOW 45 L

8 OPERATING WATER PRESSURE 0.3kgf/cm2 ~ 8kgf/cm2 (4psi ~ 114psi)

9 REVOLUTION PER MINUTE WASH : 130 - 150 RPM, SPIN : 710 -740 RPM

10 PULSATOR 6 WINGS (ø 406mm)

11 WATER LEVEL CONTROL ELECTRONICAL SENSOR

12 GEAR MECHANISM ASS’Y HELICAL GEAR

13 MAGIC FILTER O

14 SOFTENER INLET O

15 FUNCTION FOR SOAK WASH O

16 ALARM SIGNAL O

17 RESIDUAL TIME DISPLAY O

18 AUTO. WATER SUPPLY O

19 FUNCTION FOR BUBBLE AND RADICAL O

20 AUTO RE-FEED WATER O

21 AUTO POWER OFF O

NOTES

In case of moving Washing Machine, please

follow the following picture.

2 SPECIFICATIONS

Downloaded from www.Manualslib.com manuals search engine

 2. STRUCTURE OF THE WASHING MACHINE
The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.

NOTE
• The drawings in this book may vary from your washer model.
They are designed to show the different features of all models covered by this book, Your model may not
include all features.

• COLD WATER TAP • HOT WATER TAP

After using the washing After using the washing
machine, close the water tap. machine, close the water tap.
In case of the single valve
model, there is no hot water
valve.

• CONTROL PANEL

• CASE DETERGENT
AND SOFTENER

• POWER CORD

• HOSE DRAIN

• ADJUSTABLE LEG

ACCESSORIES

INLET HOSE HOSE DRAIN HOSE DRAIN CLAMP

STRUCTURE 3

Downloaded from www.Manualslib.com manuals search engine

 3. DIRECTIONS FOR INSTALLATION AND USE
INSTALLING PLACE

Install the washer on a horizontal

solid floor. If the washer is installed
on an unsuitable floor, it could make
considerable noise and vibration.
Never install in these places
ᵄ The place where it would be exposed to
direct sunlight.
ᵄ The place nearby a heater or heat
Keep the machine body
more than appliance.
25cm(9.85inches) apart ᵄ The place where it would be supposed
from the wall surface. It will to be frozen in winter.
make easy cleaning the
drain filter which is equipped ᵄ The kitchen with coal gas and a damp
25cm(9.85inches)
10Cm at the back side of it. And if place like a bathroom.
it comes into contract
vibration may occur.

⏿ How To Install On An Inclined Place

Horizon Check the Horizon
1 Setting 2 Status
After controlling the height Check the position of tub above
by turning the adjustable the center of the washer.
leg, let the washer put
down to the ground.

NOTES

The openings must not

be obstructed by carpet-
ing when the washing
machine is installed on a
carpeted floor.

⏿ How to Connect the Inlet Hose

Be careful not to mistake in supplying between the hot(maximum : 50˚C) and cold water.
In using only one water tap or in case of attached one water inlet valve, connect the inlet hose to the cold water inlet valve.
Do not over tighten : this could cause damage to couplings.
FOR SCREW-SHAPED TAP

1 Connect the inlet

hose to the water tap
by screwing the
2 Connect the
connector-inlet
supplied if necessary.
3 Insert the inlet hose adapter
into the water inlet of a washer
and turn it to be fixed.
connector D tightly.

Connector
Inlet
Rubber
Rubber
Packing
Connector D Packing
Connector D

Inlet Hose Connector C • Check the packing in the inlet

Inlet Hose Connector C

4 DIRECTIONS

Downloaded from www.Manualslib.com manuals search engine

 ⏿ HOW TO CLEAN THE FILTER
CLEANING THE MAGIC FILTER

1 While pressing the handle of

filter, remove the filter from the
guide.
2 Remove the dirt inside the
filter and clean the filter. 3 Insert the filter into guide.

CLEANING THE WATER INLET FILTER

• Clean the filter when water leaks from, the water inlet.

1 Pull the
power plug
out before
2 Turn off the
water supply
to the washer
3 Pull the
inlet filter out. 4 Remove the dirt
from the inlet filter
with a brush.
cleaning it. and sperate the
inlet hose.

CLEANING THE DRAIN FILTER

• In case “U” shape drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused.

1 Put down the

remained water in the
hose. And put a container
2 Turn the cap counter
clockwise. 3 Pull out the filter assembly off
the case of the main body.
FILTER SLIT
under the filter to collect
CASE
water.

CAP
CAP

CONTAINER
FILTER

4 Clean the drain filter

removing the foreign
stuffs.
5 Put in the filter along the
guiding prominence of the
case. Please note the left
6 Turn the cap clockwise tightly.

FILTER position of the filter adjusting

the groove to the guide rib.
CAP CASE
FILTER GUIDE CAP
RIB
CAP SUIT

CONNECTION 5

Downloaded from www.Manualslib.com manuals search engine

 4. FEATURE AND TECHNICAL EXPLANATION

Feature of the Washing Machine

1 First applying the Radical Technology in the world ... go beyond washing, sterilize your clothes and deodorize a
bad smell.
2 Quiet washing through the innovational low-noise design.
3 Improving washing performance by more than 35%, while reducing power consumption by 40%.
4 The adoption of the water currents to adjust the unbalanced load.
5 One-touch operation system.

Water Current to Adjust the Unbalanced Load

It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 60
seconds.(But, some course have no operation of the water currents to adjust the unbalanced load.)
EFFECT
It reduces vibration and noise effectively while spinning.
WATER FLOW

WASH DRAIN SPIN FILL RINSE 1 DRAIN SPIN FILL RINSE 2 DRAIN •••

MOTOR C.W
SIGNAL C.C.W
TIME(SEC.) 0.3 0.3 0.3 0.3 0.3 0.3 •••••••

WASH 60 SEC.(About 50 Times)

RINCE 30 SEC.(About 25 Times)

Automatic Water Supply System for Heavy Duty

The water level would be lowered because the blanket absorbs water at the beginning of washing. Therefore, after
2 minutes, the operation is interrupted to check the water level, and then the water is supplied again until the
selected water level is reached.

6 FEATURE

Downloaded from www.Manualslib.com manuals search engine

 Automatic Drainning time Adjustment
This system adjusts the draining time automatically according to the draining condition.

Good draining The washer begins spin process after drainage.

Draining
Bad draining Draininig time is prolonged.
condition
No draining Program is stopped and gives the alarm.

FUNCTIONAL PRINCIPLE
1 The micom can remember the time from the begining of drain to reset point when the pressure switch reaches to
“OFF” point

Drain Time Movement of the Program

Less than
Continue draining
15 minutes

More than
Program stops and gives the alarm with blinked on display lamp.
15 minutes

2 In case of continuous draining, residual drain time is determined by micom.

Draining time as a whole = D + 90
Residual drain time.
The time remembered by micom.

FEATURE 7

Downloaded from www.Manualslib.com manuals search engine

 Automatic Unbalance Adjustment
This system is to prevent abnormal vibration during intermittent spin and spin process.

FUNCTIONAL PRINCIPLE
Contact of safety switch
1. When the lid is closed, the micro switch
contact is "ON' position. Contact of micro switch
2. In case that wash loads get uneven during Lid closing
('ON' position)
spin, the outer tub hits the safety switch due
to the serious vibration, and the spin
process is interrupted.
3. In case that P.C.B. ASS’Y gets “OFF” signal Lid closing
from the safety switch, spin process is ('OFF' position)

stopped and rinse process is started

Contact lever A
automatically.
4. If the safety switch is operated due to the Position of Normal (ON)
unbalance of the tub, the program is unbalanced load (OFF)

stopped and the alarm is given.

NOTES

The alarm finished when you close the lid after opening
it. Check the unbalance of the wash load and the
installation condition.

Circulating-Water Course and Magic filter

CIRCULATING-WATER
The washing and rinsing effects have been
improved by adopting the water system in Lint filter (Option)
Magic filter
which water in the tub is circulated in a (Option) Tub
designed pattern.
When the pulsator rotates during the washing Water
or rinsing process, the water below the channel
pulsator fans creates a water currents as Pulsator
shown in figure. Outer tub
The water is then discharged from the upper
part of the tub through the water channel.
About 40 L/min. water is circulated at the ‘high’
water level, standard wash load and standard
water currents.

8 FEATURE

Downloaded from www.Manualslib.com manuals search engine

 MAGIC Filter
Much lint may be obtained according to the kind of clothes
to be washed and some of the lint may also stick to the
clothes. Filter
To minimize this possibility a magic filter is provided on
the upper part of the tub to filter the wash water as it is
discharged from the water channel. It is good to use the
magic filter during washing.

HOW TO REPLACE MAGIC FILTER

1 Pull the filter frame upward.
2 Turn the magic filter inside out, and wash the lint off with water.
3 Return the filter as it was, and fix the filter frame to the slot.

Residual Time Display

When the Start / Pause button is pressed, the residual time (min.) is displayed on the time indicator, and it will be
counted down according to process.
When operation is finished, the TIME INDICATOR will light up .

Drain Motor
STRUCTURE

Pull
Loosen
Pulley
Lever
Inductive ring
Magnet

Coil of motor
Magnet of motor

1 When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and revolves
the pulley by gear assembly for reducing.
2 When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4 The wire pulls the brake lever of Gear Mechanism Ass’y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.

FEATURE 9

Downloaded from www.Manualslib.com manuals search engine

 Gear Mechanism Ass’y
The proper water currents is made by the rotation of pulsator at a low speed to prevent the damage to the small
sized clothes.

Pusator Shaft

Spinner shaft

One way clutch

bearing

Planetary Planetary gear Sun gear

Gear Internal gear
Brake Lever

Clutch Boss
Spinner Pulley

Semi-Pulsator Motor
1800 r.p.m (60Hz)

Gear unit as V-Belt

1 revolution
Motor Pulsator
Gear Unit as
Spinner Pulley 125-140r.p.m(60Hz)
710-740r.p.m(60Hz)
5 revolutions
Tub
Gear pulley
710-740r.p.m(60Hz)
Directly
V-belt

10 FEATURE

Downloaded from www.Manualslib.com manuals search engine

 5. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT

Warning
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE WASHING MACHINE, DISCONNECT
THE POWER CORD FROM THE ELECTRIC OUTLET.

Gear Mechanism Ass’y Replacement

GEAR MECHANISM ASS’Y REPLACEMENT

1 Raise the top plate on the outer cabinet. 3 Remove the cap pulsator from the pulsator assy by
2 Loosen four screws mounting outer tub cover and using screw driver
remove outer tub cover from the tub ass’y.

4 Loosen the pulsator mounting screw and remove the 5 Remove the special nut by using “T” type box wrentch.
pulsator. 6 Remove the special washer.

DIRECTIONS 11

Downloaded from www.Manualslib.com manuals search engine

 7 Remove the tub i assy. 8 Lay the front of the washer on the floor.
9 Remove four special bolts of gear protect by using a box
wrentch and remove gear protect.
0 Remove the V-belt.

q Remove four special bolt of gear mechanism assy by w Pull out the gear mechanism assy.
using a box wrentch.

NOTES

To assemble the gear mechanism ass’y, reverse the disassembly procedure.

12 DIRECTIONS

Downloaded from www.Manualslib.com manuals search engine

 6. THE REPAIR METHOD OF GEAR MECHANISM FOR CLUTCH SPRING PROBLEM

the structure of gear mechanism

Bearing Clutch Lever

Clutch Boss Clutch Tip

Clutch Spring
Coupling

Spring Washer Pulley

Pulley Shaft Fastening Nut

ᵄTOOL FOR REPLACING THE CLUTCH BOSS ASSEMBLYᵄ

Tool name Specification Q’ty

Fixing jig 1

Ratchet handle 1

Socket and extension bar socket : 10mm, 17mm per each

Cotton yarn some

THE REPAIR 13

Downloaded from www.Manualslib.com manuals search engine

 how to check the clutch spring

CHECKING METHOD
IN THIS CASE, YOU MUST EMPTY THE SPIN TUB FIRST.
1) TO CHECK THE REVOLUTION OF SPIN TUB.
IF THE SPIN TUB DOES NOT REVOLVE AND ONLY THE PULSATOR IS TURNING, THAT IS
CLUTCH SPRING DEFECT.
2) TO CHECK THE SPIN SPEED(RPM) BETWEEN SPIN TUB AND PULSATOR.
IF YOU FIND THE DIFFERENT SPIN SPEED BETWEEN SPIN TUB AND PULSATOR, THIS IS ALSO
CLUTCH SPRING DEFECT.
IN THIS CASE, WE ARE GOING TO SUPPLY THE CLUTCH BOSS ASSEMBLY INSTEAD OF GEAR
MECHANISM ASSEMBLY. PLEASE REFER TO FOLLOWING FIG.

THE CLUTCH BOSS ASSEMBLY

NO. PARTS NAME SPECIFICATION CODE Q’TY

1 CLUTCH SPRING 1.5*1.5 3615110000 1
2 CLUTCH BOSS PP 3619301300 1
3 GREASE beacon#325 3g
PACKING PACKING THE CLUTCH BOSS ASS’Y 1
METHOD BY USING VINYL PACK

CLUTCH BOSS ASS’Y PART CORD : 3619301400

14 THE REPAIR

Downloaded from www.Manualslib.com manuals search engine

 The Process Of Disassembling

Disassembling 1
No. Process Notice

Use wrench or driver

- ratchet handle
- extension bar
- socket : 10mm
1 Remove the protector

Release screws marked 4-point

2 Remove the v-belt

Use fixing jig for pulley as to

see fig 1.
and 17mm-socket for nut

3 Loosen the fastening nut

Take out plain washer if it has

4 Disassemble the spring washer

THE REPAIR 15

Downloaded from www.Manualslib.com manuals search engine

 Disassembling 2
No. Process Notice

5 Disassemble the pulley

Catch the boss and pull

upward with spiral rotate in the
clockwise direction

Disassemble the clutch boss

6 assembly

Separate coupling from clutch

7 boss ass’y

Clean the drum plate, coupling

surface and contact face
between drum plate and
coupling

It is necessary to keep cotton

8 Cleaning piece goods being dry and
clean

16 THE REPAIR

Downloaded from www.Manualslib.com manuals search engine

 The Process Of Assembling

Assembling 1
No. Process Notice

Check the uneven face of

coupling is assembled upward

1 Assemble the coupling

- Push in the clutch boss ass’y

with rotating on the clockwise
direction.
- After assembling, rotate on the
clockwise more 2~3 teeth and
pull out the pulley shaft upward
2 Assemble the new clutch boss
ass’y

3 Assemble the pulley

If there was plain washer, you

have to assemble plain washer
the first and then assemble
spring washer

4 Assemble the spring washer

THE REPAIR 17

Downloaded from www.Manualslib.com manuals search engine

 Assembling 2
No. Process Notice

- Use fixing jig and 17mm

socket wrench
as if disassembling,
as fastening torque about
Assemble the fastening nut 100~200kgf-cm.
- Check the end-play, up and
downward and check the
5
binding force, too much or not
on bi-direct of rotation.

6 Assemble the belt

7
Assemble the protector

Finally, check the interference

depth both clutch tip and clutch
Synchronous Drain boss(3.5~4.5mm)
Motor Valve

8
Final checking
Clutch Tip
3.5~4.5

18 THE REPAIR

Downloaded from www.Manualslib.com manuals search engine

 Replace the Case Filter Ass’y
Replacing 1
1 separate the back cover from
2 remove two screws 3 remove three screws
washing machine

4 turn the case filter ass’y and 5 separate the drain hose i from 6 separate the cavitation hose from
separate it from the drain motor the case filter ass’y the case filter ass’y

7 assemble the case filter ass’y

8 tie up three screws 9 tie up two screws
that purchased

0 assemble the hose drain I to the q assemble the cavitation hose to w assemble the back cover to the
case filter with bond & clamp the case filter with bond & clamp washing machine

THE REPAIR 19

Downloaded from www.Manualslib.com manuals search engine

 7. TROUBLE SHOOTING GUIDE

NOTES

1. When replace the P.C.B. ASS’Y do not scratch the surface of the P.C.B. ASS’Y.
2. Disconnect the power cord from the electric outlet.

Concerning Water Supply

PROBLEM CHECK POINT CAUSE SOLUTION

Do you open the water NO Open the water tap.

tap?

YES

YES
Is the filter of the water
Clean the filter.
inlet valve clogged with
dirt?

NO

Is the water pressure NO Increase the water

sufficient? pressure.
(0.3~8 kgf/cm2)
NOTE : Open the water tap fully and measure
the flow rate.
Flow
rate(l/min.) 11.5 15.0 18.0 20.3 24.1 27.4
Water pressure
WATER IS YES (Kgf/cm2) 0.3 0.4 0.5 0.6 0.8 1.0
NOT From the upper results, you know that the flow rate more than
SUPPLIED. 11.5l/min. is essential for water supply.

NO Water inlet valve

Does the water inlet Change water inlet valve.
valve make operating is defective.
sound?

YES

Is the connector or the NO Improper connection of

Connect the connector or
terminal connected the connector or the
the terminal properly.
properly? terminal.

YES
NO
Is the output voltage of P.C.B AS is defective. Change the P.C.B AS.
the P.C.B normal?

YES
Lead wire is defective. Change the lead wires.

20 TROUBLE SHOOTING

Downloaded from www.Manualslib.com manuals search engine

 PROBLEM CHECK POINT CAUSE SOLUTION

Does the water supply YES The water inlet valve is Change the water inlet
continue while the power defective. valve.
is turned off?
NO
Does the water supply start YES The triac of P.C.B is Change the P.C.B
as soon as you press the defective. ASS’Y.
power switch?
NO
WATER Operate the washer after
SUPPLY IS setting the water level to
NOT “HIGH”
STOPPED.
NO
Does the water supply Normal operation.
continue after the water
reaches to the “HIGH”
level?
YES
YES
Is the air tube of water Air tube is defective. Change the air tube.
level switch kinked or
deformed? Pressure switch is Change the pressure
NO
defective. switch.

Concerning Washing

PROBLEM CHECK POINT CAUSE SOLUTION

Does the motor operate after

finishing water supply?

NO YES

Does pulsator rotate in YES The triac of P.C.B is Change the P.C.B
only one direction? defective. ASS’Y.

NO Normal
THE Does the motor make
PULSATOR operating sound?
DOES NOT YES NO
ROTATE EVEN
Is the motor coil YES
IF THE WATER Motor is defective. Change the motor.
disconnected?
IS SUPPLED.

Is the connection NO
Improper connection Connect the terminal
condition of capacitor properly.
terminal good?
YES
YES
Change the V-belt.
Is the V-belt worn out? V-belt is defective.
NO Change the motor.

TROUBLE SHOOTING 21

Downloaded from www.Manualslib.com manuals search engine

 Concerning Draining

PROBLEM CHECK POINT CAUSE SOLUTION

Do you install the NO Install the drain hose

drain hose Improper installation
properly.
properly?

YES

Is the accumulated YES

Malfunction of Remove the foreign
foreign substance
THE WASHER drainage by the substance from
inside the drain
DOES NOT foreign substance the drain housing
housing?
DRAIN.
NO
Is the output voltage of YES The drain motor is
Change the drain motor.
the drain motor defective.
normal?

NO P.C.B ASS’Y is Change the P.C.B

defective. ASS’Y.

22 TROUBLE SHOOTING

Downloaded from www.Manualslib.com manuals search engine

 Concerning Spinning
PROBLEM CHECK POINT CAUSE SOLUTION

YES
Is the lid open? Close the lid.

NO

Does the micro switch NO

Door switch is defective. Change the door switch.
operate normally?

YES

Does the safety switch NO Safety switch is Change the safety

operate normally? defective. switch.

YES

Is the connector of NO Connect the connector

Improper connection of
P.C.B ASS‘Y connected the connector. properly.
properly?

YES P.C.B. ASS’Y is Change P.C.B ASS’Y.

defective.
Does the pulsator rotate
while the tub does not
THE WASHER rotate?
DOES NOT NO
SPIN. YES

YES
Is the input
Drain motor is defective. Change the drain motor.
voltage of the drain
motor normal?

NO P.C.B ASS’Y is Change the P.C.B

defective. ASS’Y.

YES
Is the V-belt worn out? V-belt is defective. Change the V-belt.

NO
Is the input voltage of YES
Motor is defective. Change the motor.
motor normal?

NO
NO Connect the terminal
Is the connection Improper connection.
condition of capacitor correctly.
terminal good?

YES P.C.B ASS’Y is Change the P.C.B

defective. ASS’Y.

TROUBLE SHOOTING 23

Downloaded from www.Manualslib.com manuals search engine

 Concerning Operating

PROBLEM CHECK POINT CAUSE SOLUTION

NO
Is the plug connected
Connect the plug.
to electric outlet?

YES
YES
Is Fuse opened? Change Fuse
NO
THE NO
Is the condition of Change P.C.B ASS’Y.
INDICATOR Power button is defective
power button good?
LAMPS(L.E.D)
DO NOT LIGHT YES
UP WHEN THE NO
Is the connector of the Improper connection of Connect the connector
POWER P.C.B. ASS’Y the connector. properly.
BUTTON IS connected properly?
PRESSED.
YES
NO
Is input voltage of the Transformer is defective Change Transformer
transformer normal?

YES P.C.B. ASS’Y is Change P.C.B ASS’Y.

defective.

Do you press NO Press Start / Pause

PROGRESS Start / Pause button? button.
LAMPS(LED)
DO NOT LIGHT
UP. YES P.C.B ASS’Y is Replace P.C.B ASS’Y.
defective.

MOTOR
ROTATES Abnormal
WHEN
START/HOLD Check the output voltage Change P.C.B ASS’Y.
P.C.B ASS’Y is defective
BUTTON IS of P.C.B ASS’Y
NOT
PRESSED.

YES There is foreign matter Remove the foreign

Is the strange noise
between pulsator and matter.
generated when the
ABNORMAL pulsator rotates in TEST tub.
NOISE MODE of P.C.B ASS’Y?
DURING WASH
PROCESS. NO
YES
Is the V-belt worn out? V-belt is defective. Change the V-belt.

24 TROUBLE SHOOTING

Downloaded from www.Manualslib.com manuals search engine

 8. PRESENTATION OF THE P.C.B ASS’Y

Concerning Error Message

MESSAGE CAUSE SOLUTION

Improper installation of drain hose. Install drain hose properly.

The drain hose is blocked up by foreign Remove foreign matter from drain hose.
matter.

Drain motor is inferior. Change drain motor.

The water tap is closed. Open the water tap.

The water inlet filter clogged. Clean the water inlet filter.

It passes over the 60 minutes, yet it doesn’t Fully open the water tap and
come to assigned water level. Check the water pressure.

Wash loads get uneven during spin. Re-set wash loads evenly.

Poor installation of the unit. Proper installation.

The lid is opened. Close the lid.

The safety switch or micro switch is inferior. Change the safety switch or micro switch.

The load sensing is inferior. After the load

sensing operates about 7 seconds, the
message is displayed during 0.5 second Change the P.C.B. ASS’Y.
and water level is always fixed ‘high’.

The water level sensing is inferior. Check the water level sensor and the
contact part of the connector.

PCB ASS’Y 25

Downloaded from www.Manualslib.com manuals search engine

 APPENDIX

⏿ Wiring Diagram

26 PCB ASS’Y

Downloaded from www.Manualslib.com manuals search engine

 ⏿ Parts Diagram

A01

A02
A17
A03

A04
A16
A05

A15
A14 A06
A34 A12
A07
A13 A08
A09
A11
A45

A35
A10

A36

A46

A22

A37
A40
A20 A23
A21
A39 A38
A24 A26
A19
A25
A41
A18

A28
A42 A27 A31 A30

A29
A43
A44

A33
A32

PARTS DIAGRAM 27

Downloaded from www.Manualslib.com manuals search engine

 28 PARTS DIAGRAM

Downloaded from www.Manualslib.com manuals search engine

 C04

C01

C02

C09
C03

C05

C06

C07
C08

C10

C14
C11
C15

C12
C16

C17 C12
C13

C18

PARTS DIAGRAM 29

Downloaded from www.Manualslib.com manuals search engine

 D01

D03

D04

D02

D05

D06

D09
D08

D07

D10
D15

D11
D16

D12

D17

D18 D14 D13

30 PARTS DIAGRAM

Downloaded from www.Manualslib.com manuals search engine

 ⏿ Parts List

No. Item Code Item Materials and Sizes Q'TY Remarks

A01 36142T3400 PANEL *B ABS, DWF-260AX 1 WHITE
36142T3410 PANEL BACK AS DWF-260AX SPRAY COLOR
- 36142T5000 PANEL FRONT AS DWF-263AXSP 1 127V/60Hz
36142T5110 DWF-263AXNP SPRAY 220V/50Hz
36142T5010 DWF-263AXLP 220V/60Hz
A02 PRPSSW4N80 PCB AS MEXICO, DWF-263AX,S,HOT,PP,BB 1 127V/60Hz
PRPSSW4N82 DWF-263AX,N,HOT,PP,BB 220V/50Hz
PRPSSW4N81 DWF-263AX,L,HOT,PP,BB 220V/60Hz
A03 3613067100 HOLDER FUNCTION HIPS, DWF-263AX 1
A04 36116DWS00 DECORATOR FILM PC FILM, DWF-263AX 1
A05 3615514200 GUIDE WINDOW ABS, DWF-263AX 1 WHITE
3616646560 GUIDE WINDOW AS DWF-263AX, SPRAY COLOR
A06 3615515000 WINDOW DISPLAY TR-ABS, DWF-263AX 1
A07 3616646470 BUTTON FUNCTION *R ABS, DWF-263AX 1 WHITE
3616646580 BUTTON FUNCTION *R AS DWF-263AX, ABS 1 COLOR
A08 3616646460 BUTTON FUNCTION *L ABS, DWF-263AX 1 WHITE
3616646570 BUTTON FUNCTION *L AS DWF-263AX, ABS 1 COLOR
A09 3615514110 DECO WINDOW AS ABS, DWF-263AX COATING 1
A10 36142T3530 PANEL *F ABS, DWF-263AX 1 WHITE
36142T3540 UV_BASE, DWF-263AX COLOR
A11 3616646480 BUTTON POWER ABS, DWF-263AX 1 WHITE
3616646540 BUTTON POWER AS DWF-263AX, SPRAY 1 COLOR
A12 3616646490 BUTTON START ABS, DWF-263AX 1 WHITE
3616646550 BUTTON START AS DWF-263AX, SPRAY 1 COLOR
A13 3611697750 DECO BUTTON P.S AS ABS, DWF-263AX 2
A14
A15 3615514000 WINDOW COURSE TR-ABS, DWF-263AX 1
A16 3613408720 KNOB COURSE AS DWF-151AX 1
A17 3613067000 HOLDER COURSE HIPS, DWF-263AX 1
A18 3619045400 SWITCH COVER GSM-V16183A4 250V 16A 1
A19 36190470B0 SWITCH SAFETY SF-030A31, 1
A20 361480165A SENSOR PRESSURE CDL-D17N,3PIN,L=620,15DO, TUBE 1
A21 3618912200 UNIT CAPACITOR AS 45.6UF 200VAC, CAN TYPE 1 100~127V
3618911300 12.5UF 400VAC, CAN TYPE 220~240V
A22 3615416311 VALVE INLET DR-12AS:C-R-H.110-130V50/60HZ NON-O.P RUBBER 1 100~127V
3615416301 DR-23AS:C-R-H.220-240V50/60HZ.SEALING RUBBER 220~240V
A23 3610394401 BODY DETERGENT HIPS. DWF-260AX 1
A24 3618111901 NOZZLE DETERGENT RECYCLED PP. DWF-260AX 1
A25 3611338300 CORD POWER AS EP3PIN #1806 E:110MM SJT 3X18AWG 1 MEXICO
3611338200 F H05VV 3X0.75 1.9M BK EU-2PIN LEBANON
3611337710 LP-61L, BS-1363A, 250V, 13A, #1806, E:110 SAUDI
A26 3618946413 UNIT BUBBLE PUMP AS CDK-115A,H:120MM,,#1806,FR:X,JOINT 1 100~127V
3618918961 CDK-230A,H:120MM,,#1806,FR:X,JOINT 220~240V
A27 3612905300 HINGE BOSS *L ABS, DWF-26'S(HINGE DOOR) 1 WHITE
3612905500 HINGE BOSS L AS DWF-26'S(HINGE DOOR) SPRAY COLOR
A28 3612905400 HINGE BOSS *R ABS, DWF-26'S(HINGE DOOR) 1 WHITE
3612905600 HINGE BOSS R AS DWF-26'S(HINGE DOOR) SPRAY COLOR

PARTS DIAGRAM 31

Downloaded from www.Manualslib.com manuals search engine

 No. Item Code Item Materials and Sizes Q'TY Remarks
A29 3614542400 PLATE *T ABS,DWF-260AX 1 WHITE
3614542410 ABS, UV_BASE, 260A 1 COLOR
A30 36111T2L00 CASE DETERGENT ABS, DWF-260AX 1 WHITE
36111T2L10 ABS, UV_BASE DWF-260AX 1 COLOR
A31 3610907800 CAP SOFTENER PP 1
A32 7112503011 SCREW TAPPING T1S,TRS,5*30 MFZN 2
A33 3611561400 CUSHION DOOR NBR, DWF-200A 2 WHITE
3611561410 NBR, DWF-200A GRAY 2 GRAY
- 36117ADG20 DOOR AS DWF-150AX 1 ASSY(A34~44)
36117BDG10 DWF-263AXSP SPRAY
- 36117ADG30 DOOR BACK AS DWF-150AX 1 ASSY(A34~38)
36117BDG20 DWF-263AX(COATING)
A34 36117ADD30 DOOR *O ABS, DWF-150AX 1
36117ADD90 DWF-150AX ABS UV_BASE 1
A35 361A114410 DOOR GLASS DWF-263AX 4T*479*323 1
A36 36117ADE10 DOOR *I ABS,DWF-150AX 1
A37 7115401629 SCREW TAPPING T1 FLT 4X16 SUS 15
A38 3611559900 CUSHION DOOR NR 2
- 36117ADG40 DOOR FRONT AS DWF-150AX 1 ASSY(A39~44)
36117ADG70 DWF-151AX(COATING)
A39 36117ADD60 DECO DOOR DWF-150AX ABS, UV_BASE 1
A40 36117ADD50 DECO HANDLE DWF-150AX ABS COATING 1
A41 36117ADD40 HANDLE DOOR ABS, DWF-150AX 1
36117ADE30 DWF-150AX ABS UV_BASE 1
A42 36117ADE20 COVER HANDLE ABS, DWF-150AX 1
A43 7115401629 SCREW TAPPING T1 FLT 4X16 SUS 2
A44 3611559900 CUSHION DOOR NR 2
A45 3615118300 SPRING DOOR *L DWF-260AX 1
A46 3615118400 SPRING DOOR *R DWF-260AX 1

No. Item Code Item Materials and Sizes Q'TY Remarks

B01 3613218800 HOSE DRAIN OUTER AS LD-PE/EVA L=1600 PUMP 1 PUMP
B02 3614514600 PLATE UPPER 99, 1094 1
B03 7122501211 SCREW TAPPING T2S TRS 5X12 MFZN 8 FOR SUPPORTER TUB
B04 3615302220 SUPPORTER TUB BL SPG 1.6T(R-01) 1
B05 3615302320 SUPPORTER TUB BR SPG 1.6T(R-02) 1
B06 3615302420 SUPPORTER TUB FL SPG 1.6T(R-03) 1
B07 3615302520 SUPPORTER TUB FR SPG 1.6T(R-04) 1
B08 3611413605 COVER BACK 0.35T 1
B09 3610808012 CABINET SUB AS PAINTING(0.7T, 13KG) 1
PCM CABINET PCM 0.7T, WILD FLOWER SILVER
B10 3612100330 FOOT BUTYL VE 2
B11 3610312210 BASE U RECYCLING PP(DWF-1398) 1
B12 3617702122 LEG ADJUST VE 2
B13 36189L550F UNIT DRAIN PUMP AS LOW/60HZ,40W,L=1310,KET 1806 D/L,BK,BB CUT,HOSE 8 1 127V/60Hz
36189L600F HIGH/50HZ,HANYU,B30-6,40W,1806D/L,BK,L=1400,H=1250 220V/50Hz
36189L604F 220/60,8 HOSE 1250,40W,1806 D/L 220V/60Hz

32 PARTS DIAGRAM

Downloaded from www.Manualslib.com manuals search engine

 No. Item Code Item Materials and Sizes Q'TY Remarks
C01 3616104000 BALANCER AS DWF-1094 1
C02 3612504700 GUIDE FILTER AS 13KG MAGIC 1 PIECE 2 MAGIC FILTER
3612504600 13KG LINT 1 PIECE 2 LINT FILTER
C03 3611911500 MAGIC FILTER AS 10KG 1 PIECE 2 Option
C04 3611903130 FILTER LINT NYLON 226X113 2 Option
C05 3616051629 SPECIAL SCREW SUS430 T2 TRS 5.5*16 12
C06 3618831410 TUB *I SUS 0.4X398.5X1636 1
C07 3616051629 SPECIAL SCREW SUS430 T2 TRS 5.5*16 12
C08 7122400829 SCREW TAPPING T2S TRS 4X8 STS430 2
C09 7122400829 SCREW TAPPING T2S TRS 4X8 STS430 2
C10 3618831500 TUB *U 13KG 1 PIECE FRPP 1
C11 3616063700 SPECIAL NUT ZDC1 EU SAMWOO 1
C12 3617200600 FLANGE TUB ALDC12 VE1,6POINT 1
C13 3616007001 SPECIAL SCREW SCM24H,6.5*24 101S 6
C14 3610920100 CAP AGITATOR ABS, 202AX 1
C15 3616062629 SPECIAL SCREW STS430 6X26.5 1
C16 3610920000 CAP IMPELLER ABS, 202AX 1
C17 3611885600 FAN IMPELLER PP 1
C18 3619708610 PULSATOR AGITATOR 202AX, 202AX 1

No. Item Code Item Materials and Sizes Q'TY Remarks

D01 3611413910 COVER TUB O RECYCLE-PP, DWF-1398 1
D02 3618807105 TUB O DWF-12,13KG, SINSUNG 1
D03 3613265901 HOSE BUBBLE L=1250MM, ID=4 1
D04 3619803910 SUSPENSION AS(B) DWF-1398, WHITE, BACK, VE TYPE 2
D05 3619803810 SUSPENSION AS(F) DWF-1398, YELLOW, BACK, VE TYPE 2
D06 3613212120 HOSE DRAIN I EVA,L=184 1 PUMP
D07 3610387400 BASE SECEN 2.0T 1
D08 3616007001 SPECIAL SCREW SCM 24H, 6.5*24 12
D09 3612757030 HARNESS EARTH INNER L ID=4.3,R ID=8.3,L=810 1
D10 36196S1B50 DRAIN MOTOR 120-127V,SV-KL6T13D,KET#1806,L1150,BL 1 127V
36196L1B50 220V,SV-MX7T16D,KET#1806,L1150,BL 220~240V
D11 3617310600 GEAR MECHANISM(SP) GM-1500-KS6P2 1
D12 7341801511 BOLT HEX 6B-1 8*15 MFZN 4
D13 3618346001 PROTECTOR GEAR SGCC 1.2T, G/S 1
D14 3616590250 BELT V M21, AGING 50HZ 1 50Hz
3616590240 M20.5, AGING 60HZ 60Hz
D15 3611502700 CUSHION DOWN POM(8MM) 2
D16 3964221250 MOTOR CONDENSER W1D50CA013,110~127/60 TAIWAN 1450L #1806(MG620427) 1 127V/60Hz
3964510320 WM244BA011 1450L #1806(MG620427) 220V/50Hz
3964320920 WM244GA011 AC 220V/60HZ 1450L(#1806 KET MG620427 ) 220V/60Hz
D17 7650802528 BOLT HEX 6B-1 8*25 PW(3*28) MFZN 4
D18 3618401400 PULLEY MOTOR AS M-TYPE(AL), DS=10 DP=48.5 60HZ 1 127V/60Hz
3618431300 M-TYPE DS=12 DP=60.5 50HZ 220V/50Hz
3618403510 M-TYPE DS=12 DP=52.5 60HZ 220V/60Hz

PARTS DIAGRAM 33

Downloaded from www.Manualslib.com manuals search engine

 DONGBU DAEWOO
ELECTRONICS CORP.
Dongbu Financial Center, 432, Teheran-ro,
Gangnam-gu, Seoul 135-523, Korea

S/M NO. : PRINTED DATE: Jun. 2014

Downloaded from www.Manualslib.com manuals search engine

 ABOUT THIS MANUAL
vision@creativeL@incN
Է‫΂ܞ ړ‬ĸ ࣃ‫ۉ‬ʷ
VѨ‫ێ ݖ‬Οӂ˱ Tࠚ

ɽ ʁ ъ‫ ڜܞ‬ɮ
m@o@d@e@l dwfMhSVQasa@O@dwfMhSVQara@HsOmI
‫܂‬ ր RPQTNPXNQR
memo@@߭ SU
QTNPXNQRMह‫ݖ‬L@ह‫˒ݖ‬L@R@@֭Ŕ S

ِ͊ߏ
vision ɽ ʁ і О ր
telZ WSPMPVVP@faxZ WSPMSWXX

Downloaded from www.Manualslib.com manuals search engine