Dr.

Santhakumar Mohan
Designation : Associate Professor
Department : Mechanical Engineering
Address : #101, IIT Palakkad, Palakkad,
Kozhippara, Kerala 678557, India
Mobile : +91-8602-972799
E-mail : santhakumar@iitpkd.ac.in
List of Publications
1. Mishra, Swati & Mohan, Santhakumar & Vishvakarma, Santosh. (2020).
Simplified Motion Control of a Vehicle manipulator for the Coordinated
Mobile Manipulation. Defence Science Journal. 70. 72-81.
10.14429/dsj.70.14119.
2. Mohan, S., Mohanta, J.K., Behera, L., Rybak, L., Malyshev, D. Robust
Operational-Space Motion Control of a Sitting-Type Lower Limb
Rehabilitation Robot (2020) Advances in Intelligent Systems and
Computing, 1126 AISC, pp. 161-172.
3. Malyshev, D., Rybak, L., Behera, L., Mohan, S. Workspace Modelling of a
Parallel Robot with Relative Manipulation Mechanisms Based on
Optimization Methods (2020) Mechanisms and Machine Science, 78, pp.
151-163.
4. Singh, Y., Mohan, S. Development of a planar 3prp parallel manipulator
using shape memory alloy spring-based actuators (2017) ACM International
Conference Proceeding Series, Part F132085, art. no. a10,
5. Londhe, P.S., Santhakumar, M., Patre, B.M., Waghmare, L.M. Task Space
Control of an Autonomous Underwater Vehicle Manipulator System by
Robust Single-Input Fuzzy Logic Control Scheme (2017) IEEE Journal of
Oceanic Engineering, 42 (1), art. no. 7480770, pp. 13-28.
6. Patre, B.M., Londhe, P.S., Waghmare, L.M., Mohan, S. Disturbance
estimator based non-singular fast fuzzy terminal sliding mode control of an
autonomous underwater vehicle (2018) Ocean Engineering, 159, pp. 372-
387.
7. Mohan, S., Mohanta, J.K., Kurtenbach, S., Paris, J., Corves, B., Huesing, M.
Design, development and control of a 2PRP-2PPR planar parallel
manipulator for lower limb rehabilitation therapies
8. Pradhan, S.K., Nayak, A., Mohan, S. Prediction of torque variations in a pipe
inspection robot through computational fluid dynamics (2017) ACM
International Conference Proceeding Series, Part F128050, pp. 95-100.
9. Londhe, P.S., Mohan, S., Patre, B.M., Waghmare, L.M. Robust task-space
control of an autonomous underwater vehicle-manipulator system by PID-
like fuzzy control scheme with disturbance estimator (2017) Ocean
Engineering, 139, pp. 1-13.
10.Londhe, P.S., Singh, Y., Santhakumar, M., Patre, B.M., Waghmare, L.M.
Robust nonlinear PID-like fuzzy logic control of a planar parallel (2PRP-
PPR) manipulator (2016) ISA Transactions, 63, pp. 218-232.
11.Mohanta, J.K., Mohan, S., Deepasundar, P., Kiruba-Shankar, R.
Development and control of a new sitting-type lower limb rehabilitation
robot (2018) Computers and Electrical Engineering, 67, pp. 330-347.
12.Londhe, P.S., Patre, B.M., Waghmare, L.M., Santhakumar, M. Robust
proportional derivative (PD)-like fuzzy control designs for diving and
steering planes control of an autonomous underwater vehicle (2017) Journal
of Intelligent and Fuzzy Systems, 32 (3), pp. 2509-2522.
13.Mishra, S., Londhe, P.S., Mohan, S., Vishvakarma, S.K., Patre, B.M. Robust
task-space motion control of a mobile manipulator using a nonlinear control
with an uncertainty estimator (2018) Computers and Electrical Engineering,
67, pp. 729-740.
14.Mohan, S. Error analysis and control scheme for the error correction in
trajectory-tracking of a planar 2PRP-PPR parallel manipulator (2017)
Mechatronics, 46, pp. 70-83.
15.Nag, A., Mohan, S., Bandyopadhyay, S. Forward kinematic analysis of the
3-RPRS parallel manipulator (2017) Mechanism and Machine Theory, 116,
pp. 262-272.
16.Nag, A., Mohan, S., Bandyopadhyay, S. Forward kinematic analysis of the
3-RPRS parallel manipulator (2017) Mechanisms and Machine Science, 43,
pp. 103-111.
17.Karthick, S., Kumar, K.S., Mohan, S. Relative analysis of controller
effectiveness for vertical plane control of an autonomous underwater vehicle
(2016) OCEANS 2016 - Shanghai, art. no. 7485569, .
18.Venkatesan, V., Mohanta, J.K., Saha, S.K., Santhakumar, M. Dynamic
modelling approaches for a 3-PPR planar parallel manipulator (2016)
Communications in Computer and Information Science, 627, pp. 41-52.
19.Kadiyam, J., Mohan, S. Conceptual design of a hybrid propulsion
underwater robotic vehicle with different propulsion systems for ocean
observations (2019) Ocean Engineering, 182, pp. 112-125.
20.Mohan, S., Mohanta, J.K. Dual Integral Sliding Mode Control Loop for
Mechanical Error Correction in Trajectory-Tracking of a Planar 3-PRP
Parallel Manipulator (2018) Journal of Intelligent and Robotic Systems:
Theory and Applications, 89 (3-4), pp. 371-385.
21.Mohan, S., Corves, B. Inverse dynamics and trajectory tracking control of a
new six degrees of freedom spatial 3-RPRS parallel manipulator (2017)
Mechanical Sciences, 8 (2), pp. 235-248.
22.Singh, Y., Santhakumar, M. Performance investigations on optimum
mechanical design aspects of planar parallel manipulators (2016) Advanced
Robotics, 30 (10), pp. 652-675.
23.Kadiyam, J., Parashar, A., Mohan, S., Deshmukh, D. Actuator fault-tolerant
control study of an underwater robot with four rotatable thrusters (2020)
Ocean Engineering, 197, art. no. 106929, .
24.Vasanthakumar, M., Vinod, B., Mohanta, J.K., Mohan, S. Design and
Robust Motion Control of a Planar 1P-2P RP Hybrid Manipulator for Lower
Limb Rehabilitation Applications (2019) Journal of Intelligent and Robotic
Systems: Theory and Applications, 96 (1), pp. 17-30.
25.Mishra, S., Sharma, M., Santhakumar, M. Behavioural fault-tolerant-control
of an omni-directional mobile robot with four-mecanum wheels (2019)
Defence Science Journal, 69 (4), pp. 353-360.
26.Meera, C.S., Gupta, M.K., Mohan, S. Disturbance observer-assisted hybrid
control for autonomous manipulation in a robotic backhoe (2019) Archive of
Mechanical Engineering, 66 (2), pp. 153-169.
27.Mohanta, J.K., Singh, Y., Mohan, S. Kinematic and dynamic performance
investigations of asymmetric (U-shape fixed base) planar parallel
manipulators (2018) Robotica, 36 (8), pp. 1111-1143.
28.Mohanta, J.K., Mohan, S., Huesing, M., Corves, B. Error modelling and
sensitivity analysis of a planar 3-PRP parallel manipulator (2018)
Mechanisms and Machine Science, 50, pp. 315-322.
29.Mohanta, J.K., Mohan, S., Pradhan, S.K., Corves, B. A 2PRP-2PPR planar
parallel manipulator for the purpose of lower limb rehabilitation (2017)
Mechanisms and Machine Science, 43, pp. 431-439.
30.Epenetus, A.B., CS, M., Mohan, S., Gupta, M.K. Development and motion
control of spatial serial robotic manipulator under varying disturbances
(2019) World Journal of Engineering, 16 (4), pp. 460-467.
31.Mohanta, J.K., Mohan, S., Takeda, Y., Corves, B. Adaptive Backstepping
Motion Control of a New Sitting-type Lower Limb Rehabilitation Robot
(2019) Mechanisms and Machine Science, 73, pp. 2761-2768.
32.Mohan, S., Corves, B., Wenger, P. Design optimization and accuracy
analysis of a planar 2PRP-PRR parallel manipulator (2018) Mechanisms and
Machine Science, 50, pp. 432-440.

DR. M. I SAKRI
Designation : Professor
Department : Automobile Engineering
Address :BLDEA’s V. P. Dr. P. G. Halaktti College of Engg. & Tech.,
Vijayapur-586101, India
Mobile : +91-9611871952
E-mail : mech.sakri@bldeacet.ac.in
List of Publications
1. Subhashchandra S Ganiger, Mahadev Sakri, Madeva Nagaral, S. Shashidhar,
V. Auradi, Microstructural evolution and mechanical behavior of 90-micron
sized B4C particulates reinforced Al2219 alloy composites, Materials
Today: Proceedings, 2021 (In-Press).
2. V Patil, M Sakri, Effect of Electrical Damping Ratio on Maximum Average
Power of an Electromagnetic Vibration Harvester at Resonance and off-
Resonance Conditions, International Journal of Recent Technology and
Engineering (2019) 8 (2S7), 328-333.
3. Sakri, M.I., Adimurthy, M. Vibration control of electronic equipment in a
dynamic environment using spacers (2019) 7 (6), pp. 657-659.
4. Kori, P.S., Vanarotti, M., Angadi, B.M., Nagathan, V.V., Auradi, V., Sakri,
M.I. Effect of Copper Coated SiC Reinforcements on Microstructure,
Mechanical Properties and Wear of Aluminium Composites (2017) 225 (1),
art. no. 012265,
5. Sakri, M.I., Mohanram, P.V. Numerical analysis of a dynamic responses due
to board level drop test (2009) 78 (1-2), pp. 64-78.
6. Sakri, M.I., Saravanan, S., Mohanram, P.V., Abuthakeer, S.S. Estimation of
fatigue-life of electronic packages subjected to random vibration load,
(2009) 59 (1), pp. 58-62.
7. Sakri, M.I., Saravanan, S., Mohanram, P.V. Modeling and simulation of
electronic packages subjected to drop impact (2008) 9 (2), pp. 138-148.
8. Saravanan, S., Sakri, M.I., Mohanram, P.V. Fatigue prediction of electronic
packages subjected to random vibrations (2008) 5 (1), pp. 31-35.
DR.L.A. KUMARASWAMIDHAS
Designation : Associate Professor
Department : Mining Machinery Engineering
Address : Indian Institute of Technology, (Indian School of Mines),
Dhanbad, Jharkhand, India, Pin: 826004.
Mobile : 9471187333
E-mail : lakdhas1978@gmail.com
List of Publications
1. Tiwari, S. K., et al. “Modelling of Ambient Noise Levels in Urban
Environment.” Lecture Notes in Mechanical Engineering, 2021,
doi:10.1007/978-981-15-8542-5_70.
2. Shankar kumar, P., et al. “Bearing Degradation Assessment and Remaining
Useful Life Estimation Based on Kullback-Leibler Divergence and Gaussian
Processes Regression.” Measurement: Journal of the International
Measurement Confederation, vol. 174, 2021,
doi:10.1016/j.measurement.2020.108948.
3. Loganathan, M. K., et al. “Parametric Performance Analysis of Battery
Operated Electric Vehicle.” 2021 International Conference on Sustainable
Energy and Future Electric Transportation, SeFet 2021, 2021,
doi:10.1109/SeFet48154.2021.9375788.
4. Suman, S., et al. “Nonlinear Vibration Control Device for a Vehicle
Suspension Using Negative Stiffness Mechanism.” Journal of Vibrational
Engineering and Technologies, 2021, doi:10.1007/s42417-020-00275-6.
5. Suresh Kumar, G., and L. A. Kumaraswamidhas. “Design Optimization
Focused on Failures during Developmental Testing of the Fabricated Rear-
Axle Housing.” Engineering Failure Analysis, vol. 120, 2021,
doi:10.1016/j.engfailanal.2020.104999.
6. Singh, J., et al. “A Monte Carlo Simulation Investigation on the Effect of the
Probability Distribution of Input Quantities on the Effective Area of a
Pressure Balance and Its Uncertainty.” Measurement: Journal of the
International Measurement Confederation, vol. 172, 2021,
doi:10.1016/j.measurement.2020.108853.
7. Thangapazham, P., et al. “CAE Analysis and Road Load Data Acquisition
Experimentation on Bogie Bracket of Heavy Duty Commercial Vehicle.”
 International Journal of Heavy Vehicle Systems, vol. 27, no. 3, 2020, pp.
258–77, doi:10.1504/IJHVS.2020.108735.
8. Chidambara Raja, S., et al. “An Experimental Investigation on the Enhanced
Thermal Behavior of Packed Beds Integrated with Al2O3 Nanofluid.”
Journal of Enhanced Heat Transfer, vol. 27, no. 4, 2020, pp. 347–65,
doi:10.1615/JENHHEATTRANSF.2020033645.
9. Kumar, P. S., et al. “Selection of Efficient Degradation Features for Rolling
Element Bearing Prognosis Using Gaussian Process Regression Method.”
ISA Transactions, 2020, doi:10.1016/j.isatra.2020.12.020.
10.Sureshkumar, G., and L. A. Kumaraswamidhas. “Optimization of Structural
Parameters through Objective-Evaluation of Ride Comfort in a Heavy-Duty
Commercial Vehicle.” Cogent Engineering, vol. 7, no. 1, 2020,
doi:10.1080/23311916.2020.1743408.
11.Upadhyay, N. K., et al. “Enhanced Thermoelectric Properties of Pristine
CrSi2 Synthesized Using a Facile Single-Step Spark Plasma Assisted
Reaction Sintering.” Materials Science in Semiconductor Processing, vol.
109, 2020, doi:10.1016/j.mssp.2020.104917.
12.Karthik Selva Kumar, K., and L. A. Kumaraswamidhas. “Investigation on
Stability of an Elastically Mounted Circular Tube Under Cross-Flow in
Inline Square Arrangement.” Iranian Journal of Science and Technology -
Transactions of Mechanical Engineering, vol. 44, no. 2, 2020, pp. 313–25,
doi:10.1007/s40997-018-0268-4.
13.Chidambara Raja, S., et al. “Analytical Model for Prediction of Effective
Thermal Conductivity of a Three-Phase System: Nanoparticle as the Third
Phase.” Heat Transfer Research, vol. 51, no. 3, 2020, pp. 1197–211,
doi:10.1615/HEATTRANSRES.2020034475.
14.Mathan Kumar, N., et al. “An Experimental Analysis of AA 2025 Tube Plate
with Commercial Copper Tube by Gas Tungsten Arc Welding.” AIP
Conference Proceedings, vol. 2283, 2020, doi:10.1063/5.0024922.
15.Bharti, K., et al. “Detailed Investigation of Adhesive Fillet Tubular T-Joint
of Laminated FRP Composite Tube under Axial Compressive Load.”
Welding in the World, vol. 64, no. 7, 2020, pp. 1279–92,
doi:10.1007/s40194-020-00908-0.
16.Singh, J., et al. “Characterization of a Standard Pneumatic Piston Gauge
Using Finite Element Simulation Technique vs Cross-Float, Theoretical and
Monte Carlo Approaches.” Advances in Engineering Software, vol. 150,
2020, doi:10.1016/j.advengsoft.2020.102920.
17.Agasthian, A., et al. “Defense Model for Preserving the Wind Turbine
Records in Cloud Using Fog Computing with Coupling Based
 Cryptography.” Peer-to-Peer Networking and Applications, vol. 13, no. 6,
2020, pp. 2155–65, doi:10.1007/s12083-019-00819-y.
18.Prakash, A., et al. “A Methodology for Designing Cutting Drum of Surface
Miner to Achieve Production of Desired Chip Size.” Sadhana - Academy
Proceedings in Engineering Sciences, vol. 45, no. 1, 2020,
doi:10.1007/s12046-020-01387-1.
19.Prasad, R., et al. “Analysis of the Influence of Blaine Numbers and Firing
Temperature on Iron Ore Pellets Properties Using RSM-I-Optimal Design:
An Approach Toward Suitability.” Mining, Metallurgy and Exploration, vol.
37, no. 5, 2020, pp. 1703–16, doi:10.1007/s42461-020-00282-x.
20.Jha, S. K., et al. “Investigations of Flow Phenomena Over a Flat Plate and
NACA0012 Airfoil at High Angles of Attack.” Iranian Journal of Science
and Technology - Transactions of Mechanical Engineering, vol. 44, no. 4,
2020, pp. 985–96, doi:10.1007/s40997-019-00313-z.
21.Kumar, C., et al. “Experimental Investigations on Thermal Behavior during
Pick-Rock Interaction and Optimization of Operating Parameters of Surface
Miner.” International Journal of Rock Mechanics and Mining Sciences, vol.
133, 2020, doi:10.1016/j.ijrmms.2020.104360.
22.Kumar, R., et al. “Performance Analysis of Rotary Blast-Hole Drills through
Machine Vibration and Coarseness Index Mapping – A Novel Approach.”
Measurement: Journal of the International Measurement Confederation, vol.
165, 2020, doi:10.1016/j.measurement.2020.108148.
23.Bharti, K., et al. “A Novel Optimization Approach for Bonded Tubular Gap
K-Joints Made of FRP Composites.” Structures, vol. 28, 2020, pp. 2135–45,
doi:10.1016/j.istruc.2020.10.021.
24.Singh, J., et al. “A Comparative Investigation of Pressure Distortion
Coefficient of a Pneumatic Piston Gauge and Its Associated Uncertainty
Using Varied Approaches.” Accreditation and Quality Assurance, vol. 24,
no. 2, 2019, pp. 105–12, doi:10.1007/s00769-018-1355-3.
25.Jha, S. K., et al. “Investigations of Flow Phenomena behind a Flat Plate with
Circular Trailing Edge.” Journal of the Brazilian Society of Mechanical
Sciences and Engineering, vol. 41, no. 5, 2019, doi:10.1007/s40430-019-
1699-6.
26.Thangapazham, P., et al. “Failure Mode Investigation and Re-Design of
Heavy-Duty Commercial Vehicle Bogie Bracket.” Transactions of the
Canadian Society for Mechanical Engineering, vol. 43, no. 3, 2019, pp. 405–
15, doi:10.1139/tcsme-2018-0204.
27.Chidambara Raja, S., et al. “Prediction of Pressure Dependent Effective
Thermal Conductivity of Two Phase Materials in High Temperature
 Applications-An Analytical Method Using Hexagon and Octagon Models.”
International Journal of Thermal Sciences, vol. 135, 2019, pp. 192–205,
doi:10.1016/j.ijthermalsci.2018.08.044.
28.Kumar, P. S., et al. “Selecting Effective Intrinsic Mode Functions of
Empirical Mode Decomposition and Variational Mode Decomposition Using
Dynamic Time Warping Algorithm for Rolling Element Bearing Fault
Diagnosis.” Transactions of the Institute of Measurement and Control, vol.
41, no. 7, 2019, pp. 1923–32, doi:10.1177/0142331218790788.
DR. K V GANGADHARAN
Designation : Professor
Department : Dept. of Mechanical Engineering
Address : National Institute of Technology Karnataka
Surathkal Post, Srinivasnagar, Mangalore – 575025
Karnataka
Mobile : +91 824 2473915
E-mail : kvganga@nitk.edu.in
List of Publications
1. Potdar, S. M., et al. “Conceptualization and Design of Remotely-Accessible
Hardware Interface (RAHI) Laboratory.” Advances in Intelligent Systems
and Computing, vol. 1176, 2021, doi:10.1007/978-981-15-5788-0_12.
2. Shetty, N. B., et al. “Remotely Operated Marine Rescue Vehicle.” AIP
Conference Proceedings, vol. 2247, 2020, doi:10.1063/5.0004147.
3. Shetty, S., et al. “Experiential Learning of Strength of Materials and Fluid
Mechanics Using Virtual Labs.” Proceedings of CONECCT 2020 - 6th IEEE
International Conference on Electronics, Computing and Communication
Technologies, 2020, doi:10.1109/CONECCT50063.2020.9198678.
4. Kumar, N., et al. “Vibration Control of Beam with Magnetic Rotating
Unbalance.” AIP Conference Proceedings, vol. 2247, 2020,
doi:10.1063/5.0004459.
5. Shenoy, K. P., et al. “A Novel Approach to Characterize the Magnetic Field
and Frequency Dependent Dynamic Properties of Magnetorheological
Elastomer for Torsional Loading Conditions.” Journal of Magnetism and
Magnetic Materials, vol. 498, 2020, doi:10.1016/j.jmmm.2019.166169.
6. Hegale, A., et al. “The Effect of Inclination Angle of Shock Absorber on
Ride Comfort and Road Holding of Two-Wheeled Vehicle.” AIP Conference
Proceedings, vol. 2247, 2020, doi:10.1063/5.0003891.
7. Praveen, S. K., et al. “Performance of Magnetorheological Elastomer Based
Torsional Vibration Isolation System for Dynamic Loading Conditions”
Journal of Central South University, vol. 27, no. 1, 2020, pp. 144–54,
doi:10.1007/s11771-020-4284-3.
8. Ravikumar, K. N., et al. “Application of Vibration Analysis and Data Mining
Techniques for Bearing Fault Diagnosis in Two Stroke IC Engine Gearbox.”
AIP Conference Proceedings, vol. 2247, 2020, doi:10.1063/5.0003811.
9. Suhas, A., et al. “Open-Source Remote Triggered Laboratory for Web Based
Manufacturing-A Case Study of 2D Plotter.” Proceedings of the 4th
International Conference on Electronics, Communication and Aerospace
Technology, ICECA 2020, 2020, pp. 1418–22,
doi:10.1109/ICECA49313.2020.9297410.
10.Susheelkumar, G. N., et al. “Theoretical and Experimental Investigation of
Model-Free Adaptive Fuzzy Sliding Mode Control for MRE Based Adaptive
Tuned Vibration Absorber.” Smart Materials and Structures, vol. 28, no. 4,
2019, doi:10.1088/1361-665X/ab04b6.
11.Praveen Shenoy, K., and K. V. Gangadharan. “A Novel Method for
Dynamic Characterization of Angular Displacement-Dependent Viscoelastic
Properties of Magnetorheological Elastomer under Torsional Loading
Conditions.” Smart Materials and Structures, vol. 28, no. 7, 2019,
doi:10.1088/1361-665X/ab1f34.
12.Kiran, K., and K. V. Gangadharan. “Modelling of Frictional Damper with
Equivalent Viscous Damper.” AIP Conference Proceedings, vol. 2247, 2020,
doi:10.1063/5.0003868.
13.Shetty, S., et al. “Experiential Learning of Physio-Chemical and
Bacteriological Properties of Water Using Virtual Labs.” 2020 IEEE
International Conference on Distributed Computing, VLSI, Electrical
Circuits and Robotics, DISCOVER 2020 - Proceedings, 2020, pp. 273–78,
doi:10.1109/DISCOVER50404.2020.9278043.
14.Radhika, K. A., et al. “IoT Based Joystick Controlled Pibot Using Socket
Communication.” 2018 IEEE Distributed Computing, VLSI, Electrical
Circuits and Robotics, DISCOVER 2018 - Proceedings, 2019, pp. 121–25,
doi:10.1109/DISCOVER.2018.8674130.
15.Susheelkumar, G. N., et al. “Preparation and Dynamic Characterization of
Polymer Based Magnetorheological Elastomer for Vibration Isolator.” AIP
Conference Proceedings, vol. 2057, 2019, doi:10.1063/1.5085631.
16.Puneet, N. P., et al. “Multi Objective Optimization of Quarter Car
Parameters for Better Ride Comfort and Road Holding.” AIP Conference
Proceedings, vol. 2200, 2019, doi:10.1063/1.5141216.
17.Rajpal, R., et al. “Parametric Modeling and Real Time Remote
Experimentation of a Reconfigurable Coupled Pendulum.” Materials Today:
Proceedings, vol. 5, no. 11, 2018, pp. 24157–66,
doi:10.1016/j.matpr.2018.10.210.
18.Poojary, U. R., and K. V. Gangadharan. “Integer and Fractional Order-Based
Viscoelastic Constitutive Modeling to Predict the Frequency and Magnetic
Field-Induced Properties of Magnetorheological Elastomer.” Journal of
 Vibration and Acoustics, Transactions of the ASME, vol. 140, no. 4, 2018,
doi:10.1115/1.4039242.
19.Poojary, U. R., et al. “Experimental Investigation on the Effect of Carbon
Nanotube Additive on the Field-Induced Viscoelastic Properties of
Magnetorheological Elastomer.” Journal of Materials Science, vol. 53, no. 6,
2018, pp. 4229–41, doi:10.1007/s10853-017-1883-y.
20.Hemanth, K., et al. “Dynamic Analysis of Half Car Model with MR Damper
as Semi-Active Suspension Element.” International Journal of Acoustics and
Vibrations, vol. 23, no. 2, 2018, pp. 138–46,
doi:10.20855/ijav.2018.23.21131.
21.Lijesh, K. P., et al. “Design of Magneto-Rheological Brake for Optimum
Dimension.” Journal of the Brazilian Society of Mechanical Sciences and
Engineering, vol. 40, no. 3, 2018, doi:10.1007/s40430-018-1089-5.
22.Arunkumar, M. P., et al. “Vibro-Acoustic Response and Sound Transmission
Loss Characteristics of Truss Core Sandwich Panel Filled with Foam.”
Aerospace Science and Technology, vol. 78, 2018, pp. 1–11,
doi:10.1016/j.ast.2018.03.029.
23.Anginthaya, K., et al. “A Comparative Study on the Effectiveness of System
Parameters in Monitoring Pre-Load Loss in Bolted Joints.” Journal of the
Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 8,
2018, doi:10.1007/s40430-018-1316-0.
24.Vernekar, K., et al. “Engine Gearbox Fault Diagnosis Using Machine
Learning Approach.” Journal of Quality in Maintenance Engineering, vol.
24, no. 3, 2018, pp. 345–57, doi:10.1108/JQME-11-2015-0058.
25.Poojary, U. R., et al. “Dynamic Deformation–Dependent Magnetic Field–
Induced Force Transmissibility Characteristics of Magnetorheological
Elastomer.” Journal of Intelligent Material Systems and Structures, vol. 28,
no. 11, 2017, pp. 1491–500, doi:10.1177/1045389X16672730.
26.Gangadharan, K. V., and S. Chandramohan. “Analytical Studies on Ride
Quality and Ride Comfort in Chennai Mass Rapid Transit System (MRTS)
Railroad Vehicle.” Journal of The Institution of Engineers (India): Series C,
vol. 99, no. 6, 2018, pp. 737–42, doi:10.1007/s40032-017-0414-6.
DR. SURESHA B
Designation : Professor
Department : Mechanical Engineering
Address : National Institute of Engineering
Mysuru-570008, Karnataka
Mobile : 9448554240
E-mail : sureshab@nie.ac.in
List of Publications
1. S. Prakash, R. Sasikumar ,Elango Natarajan,B. Suresha. (2020). “Influence
of Feeding Techniques in Bottom Tapping Stir Casting Process for
Fabrication of Alumina Nano-filler-reinforced Aluminium Composites” ,The
Indian Institute of Metals – IIM (Available Online).
2. Mahadevaswamy, H. S,B. Suresha (2020). “Role of nano-CaCO3 on
mechanical and thermal characteristics of pineapple fibre reinforced epoxy
composite”, Material Today Proceedings, vol. 22(3) 572-579.
3. S Rakshath, B. Suresha,R.Sasi Kumar, S. Saravanan(2020). “Dry sliding
and abrasive wear behaviour of Al-7075 reinforced with alumina and boron
nitride particulates”, Material Today Proceedings, vol. 22(3) 619-626.
4. Krishna, B. Suresha, H.M.Somashekar(2019). “Role of Fillers on Physico-
Mechanical Properties of POM Based Hybrid Composites”, Materials
Sciences and Engineering, (895) 170-175.
5. B.S.Kanthraju, B.Suresha and H M Somashekar(2019). “Role of Zirconia
Filler on Mechanical Properties and Dry Sliding Wear Behavior of
Glass/Basalt Hybrid Fabric Reinforced Epoxy Composites”, Materials
Sciences and Engineering, (895)200-205.
6. Suresha Bheemappa, AchyutanantaPadaki, Akash Jain, Bharath Kumar,
Akshay A. Kulkarni (2019). “Role of Zirconia Filler on Mechanical
Properties of HDPE/UHMWPE Blend Composites”, Materials Sciences and
Engineering, (895)272-277.
7. B. Suresha, S.G. Channabasavanna, and N. Siva Shanmugam, (2019).
“Microstructure and Abrasive Wear Behaviour of Nickel Based Hardfacing
Stainless Steel Deposited by Gas Metal Arc Welding”,Applied Mechanics
and Materials,(895)278-283.
8. Hemanth R ,Suresha B, Sekar M, (2019). “Dry Sliding Wear Performance
of Thermoplastic Copolyester Elastomer Composites” Applied Mechanics
and Materials, (895)38-44
9. B. Harshavardhan1, R. Ravishankar, B. Suresha, S. Srinivas, (2019). “Static
and Dynamic Mechanical Performance of Carbon Fiber Reinforced
Polyethersulfone Composites” Applied Mechanics and Materials (895) 265-
271.
10.M. Darshan, B. Suresha, (2019). “Mechanical and Abrasive Wear
Behaviour of Waste Silk Fiber Reinforced Epoxy Bio composites Using
Taguchi Method”, Materials Science Forum, (895)787-793.
11.R. Hemanth, B. Suresha, M. Sekar(2019). “Role of fibers and fillers on
thermal behaviour of thermoplastic copolyester elastomer composites”, AIP
Conference Proceedings 2128, 020018 (2019).
12.B. SureshaG. Hemanth, ApurvaRakesh, K. M. Adarsh (2019). “Tribological
behaviour of pongamia oil as lubricant with and without halloysite nanotubes
using four-ball tester”, AIP Conference Proceedings, 2128, 030011.
13.G. Hemanth, B. Suresha,R. Hemanth(2019). “The effect of hexagonal boron
nitride on wear resistance under two and three-body abrasion modes of
polyether ketone composites”, AIP Conference Proceedings, 2128, 030011.
14.Suresha, B., G. Hemanth, Apurva Rakesh, and K. M. Adarsh.(2019):
"Tribological behaviour of pongamia oil as lubricant with and without
halloysite nanotubes using four-ball tester." In AIP Conference Proceedings,
vol. 2128, no. 1, p. 030011.
15.B. Suresha,Roshan S Shenoy, Raviprasad Bhat, P K Sohan, R
Hemanth(2019). “Optimization of wear behaviour of boron nitride filled
polyaryletherketone composites by Taguchi approach”, Materials Research
express, p.085329.
16.B. Muralidhara, S.P. Kumaresh BabuaB. Suresha (2019). “Utilizing vacuum
bagging process to prepare carbon fiber/epoxy composites with improved
mechanical properties”, Materials Today Proceedings, (Available Online).
17.B.Muralidhara, S,P. KumareshBabuaB. Suresha (2019). “The effect of
boron carbide on the mechanical properties of bidirectional carbon
fiber/epoxy composites”, Materials Today Proceedings, (Available Online).
18.B. Suresha,B. Harshavardhan, Ashwij M.Rao, U.R.Koushik, R.Hemanth
(2019). “Role of nano-fillers on tribological behaviour of ultra-high
molecular weight polyethylene composites”, Materials Today Proceedings,
(Available Online).
19.B. SureshaC. A. Varun, N. M. Indushekhara, H. R. Vishwanath. (2019)
“Effect of Nano Filler Reinforcement on Mechanical Properties of Epoxy
Composites”, IOP Conf. Ser.: Mater. Sci. Eng.574 012010.
20.Manoharan, S., R. Vijay, D. Lenin Singaravelu, S. Krishnaraj, B.
Suresha(2019). “Tribological characterization of recycled basalt-aramid
fiber reinforced hybrid friction composites using grey-based Taguchi
approach”, Materials Research Express, vol. 6 (6) 065301.
21.Anjum, Naveed, B. Suresha Somanahally Lingaiah Ajit Prasad. (2019).
“Influence of Water Ageing on Mechanical Properties of CaCO3 Filler
Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites”,
Open Journal of Composite Materials, 2019, 9, 1-20.
22.P.A. Udaya Kumar Ramalingaiah B. Suresha N. Rajini K.G. Satyanarayana.
(2018). “Effect of treated coir fiber/coconut shell powder and aramid fiber
on mechanical properties of vinylester Polymer Composite”, Polymer
Composites, 39(12) 4542-4550.
23.G. S. Divya,B, Suresha(2018). “Role of Metallic Nanofillers on Mechanical
and Tribological Behaviour of Carbon Fabric Reinforced Epoxy
Composites”, Materials Sciences and Applications,9 740-750.
DR. G. SRINVASAN
Designation : Technical officer ‘C’
Department : CEAD Division,
Address : Combat Vehicles Research & Development Establishment
(CVRDE), DRDO, AVADI, Chennai-600054, Tamil Nadu
Mobile : 9444346178
E-mail : kalaisri_1965@yahoo.com
List of Publications
1. Srinivasan, G, Sunil, M, Muthaiah, M, Rajesh Kumar, J, Balaguru, V, &
Sivakumar, P 2018, Load distribution analysis in hull and turret interface
bearing of armoured fighting vehicles. In IOP Conference Series: Materials
Science and Engineering, 402(1), 012069.
2. Srinivasan, G, Senthil Kum, M, & Junaid Basha, AM 2016, 'Performance
evaluation of passive and active suspension for armoured fighting vehicles',
International Journal of Applied Engineering Research, vol. 11, no. 1,
pp.331–336.
3. Banerjee, S, Balamurugan, V, Sunil, M, & Srinivasan, G 2016, Transient
Dynamic Finite Element Analysis of the Air-defence Weapon System Mount
Assembly of Tracked Vehicle. In Procedia Engineering, 382–389.
4. Srinivasan, G, Kumar, MS, & Basha, AMJ 2015, A conditional-proportional
damper schedule for semi-active suspension of ground vehicles. In 2015
International Conference on Smart Technologies and Management for
Computing, Communication, Controls, Energy and Materials, ICSTM 2015 -
Proceedings, 629–636.
5. Srinivasan, G, Junaid Basha, AM, Senthil Kumar, M, & Anbudurai, K 2012,
'Proportional integral derivative control of Hydro-Gas suspension unit for
tracked vehicles', International Journal of Vehicle Structures and Systems,
vol. 4, no. 1, pp.28–33.