Scribd
Upload
83 views1 page

Inspection Report

The inspection report details issues found in the Practical Work Area, including a broken gear shaft in a portable angle grinder, a damaged circuit board in a multi-meter, and an over-used carbon brush in an electric drill. Actions taken include sending the grinder for technical repair, replacing the multi-meter, and requesting the purchase of a new carbon brush. The report was compiled by Timothy John N. Mandia and issued on July 21, 2021.

Uploaded by

Timothy John Natal Mandia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
83 views1 page

Inspection Report

The inspection report details issues found in the Practical Work Area, including a broken gear shaft in a portable angle grinder, a damaged circuit board in a multi-meter, and an over-used carbon brush in an electric drill. Actions taken include sending the grinder for technical repair, replacing the multi-meter, and requesting the purchase of a new carbon brush. The report was compiled by Timothy John N. Mandia and issued on July 21, 2021.

Uploaded by

Timothy John Natal Mandia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION REPORT

Area/Section : Practical Work Area

In-Charge : Marco Lukas

FACILITY TYPE INCIDENT ACTION TAKEN PROGRESS


REMARKS
Portable Angle Gear shaft or key Sent for
Repaired
Grinder broken technical repair
Salvage the test
probe recycle the
Multi-meter Circuit Board is Replace with new
damage multi-
(Sanwa) Damaged unit.
meter for realia
presentation.
Requested to
Over-used Replace with new
Electric drill purchase carbon
carbon brush carbon brush
brush

Reported by: Date :


John Andrei July 21, 2021

Date Developed: Document No.


ELECTRICAL
June 2021
INSTALLATION
Issued by: Page
AND
Compiled by:
MAINTENANCE
Timothy John N. Mandia
NC II
Revision #

You might also like