CH-30 CHASSIS — A340E, A340F, A343E AND A343F AUTOMATIC TRANSMISSIONS
JSHIFT CONTROL MECHANISM
1. General
D A gate type shift lever is used. With the gate type, the shift lever button and the overdrive switch of the
straight type shift lever have been discontinued. Similar functions are achieved through a single-shift
operation (fore-aft and side-to-side).
D This shift lever mainly consists of a shift lock ECU, a shift lever plate, and a shift lever sub-assembly.
D The shift lock ECU has a built-in transmission control switch, P detection switch, and shift lock solenoid.
D The shift lock system consists of a key interlock device and a shift lock mechanism.
Shift Pattern
Shift Lock ECU
271CH23
Shift Lever Assembly
LHD Model
NM
00M4E
CHASSIS — A340E, A340F, A343E AND A343F AUTOMATIC TRANSMISSIONS CH-31
2. Shift Lock System
General
D The key interlock device prevents the key from being pulled out after the ignition switch is turned OFF,
unless the shift lever is moved to the P position. Thus, the driver is urged to park the vehicle in the P
position.
D The shift lock mechanism prevents the shift lever from being shifted to a position other than the P
position, unless the ignition switch is ON and the brake pedal is pressed. This prevents the vehicle from
starting off suddenly against the wish of the driver.
Layout of Main Components
Ignition Switch
· Key Interlock Solenoid
Stop Light Switch CH
Shift Lock Release Button
Shift Lock ECU
· P Detection Switch
· Shift Lock Solenoid
271CH24
LHD Model
NM
00M4E
CH-32 CHASSIS — A340E, A340F, A343E AND A343F AUTOMATIC TRANSMISSIONS
Key Interlock Solenoid
The activation of the key interlock solenoid that is mounted on the upper column bracket moves the lock
pin to restrict the movement of the key cylinder. Therefore, if the shift lever is shifted to any position other
than “P”, the ignition key cannot be moved from “ACC” to the “LOCK” position.
Key Interlock Solenoid
271CH25
System Operation
D The shift lock ECU uses the P detection switch to detect the shift lever position, and receives output
signals from the stop light switch and ignition switch signals. Upon receiving these signals, the shift lock
ECU turns ON the key interlock solenoid and the shift lock solenoid in order to release the key interlock
and shift lock.
D A shift lock release button, which manually releases the shift lock mechanism, is used.
" System Diagram A
Shift Lock ECU
Key Interlock
Stop Light Switch Solenoid
Shift Lock
Circuit
Ignition Switch
Shift Lock
Solenoid
P Detection
Switch
232CH94
NM
00M4E