The Innovative versatile Transport Incubator
works with any environment efficiently.
INNOVATIVE INFANT TRANSPORT INCUBATOR
The newborn is not just a bundle of joy. It's a beautiful example of hope and wonder,
and life itself. To protect it during the critical neonatal stage, and see it glowing with
health is a labor of love. Neotech infuses the same warmth and dedication into its
effort in making the finest neonatal intensive care equipment.
Neotech Incubators, made to international standards, embody Precision,
Reliability and Convenience.
Health Care Excellence
INFANT TRANSPORT INCUBATOR
Thermal Performance : The precise Orchid 3000 temperature control
system and excellent temperature maintenance capacity ensure transport
under proper nursing conditions. The spacious incubator maintains a stable
thermal environment even when the ambient air temp is 0 0 C during
transport of Low birth weight infants and high risk neonates.
Orchid 3000
Aninfant's smile is
infinitelyprecious.
COMMAND & CONTROL
The Microprocessor controller features a display that is RETRACTABLE
easy to read at any angle during transport. Servo control BED SIDE DOOR
Skin and Air Modes helps maintain the temperature. For respiration tubing
Visual indication for battery power status, power and others. Way in for
sources and system alarm status are designed to keep monitor leads and tubes
the care given in command. with no occlusion.
FLEXIBLE POWER SOURCE
Standard Accessories
Invertor is an air (or)
Observation Lamp, IV Pole,
ground transport, power is
Skin temperature Probe
the last thing you should
worry about. Accessories (Optional)
The orchid 3000 from nice O2 cylinder,
neotech operates on AC or O2 Failure Alarm,
DC power using AC when O2 Driven Venturi
available (or) switching to Slow Suction
its internal battery when
necessary for extended
length transports.
The system can be O2 Driven Venturi Slow
configured with a second Suction with humidified oxygen
linear battery.
ACCESS MADE EASY INTEGRATED EXAMINATION LIGHT
Access to the infant is quick and easy through the An integrated examination light provides evenly
front access door and the head door (or) side access distributed illuminations to the mattress, assisting
doors. The head door folds down and the mattress you in accurate patient assessment during transport.
retracts out from the hood to provide access for THE RIGHT SIZE AND WEIGHT : This makes
emergency procedures. transport easy. The nice Neotech Orchid 3000
transport incubator is designed to fit into smaller
spaces. System weight has also been reduced to
enhance mobility and easy access in and out of
emergency transport vehicle.
IRIS PORT (Optional)
An iris port and six tubing ports offer ventilator
tubing support and entry possibilities for sensors
while keeping the temperature stable.
COLLAPSIBLE STAND WITH SHOCK ABSORBERS
Stainless Steel stand with collapsible for ambulance
and in hospital transport purposes. Four shock
absorbers system to allow resistance to peripherals
as respirators, Infusion pumps and Monitors.
FRONT DOOR Fixed type trolley (optional), also it absorbs shocks
Total view and access with frontal access panel and and vibrations during transport.
three entry ports.
INTEGRAL HUMIDIFIER : Humidity is extremely
important especially for babies less than 26 weeks in
gestational age. An integral humidity pad helps
minimize the infants evaporative heat loss by
providing 50-70% humidity in the patient hood for
up to 3 hours.
ACCESSORY SHELF (Optional)
Auxillary tray, Shelf for other additional equipment
as Pulse Oximeter, Respirator with Blender, Infusion
Pump, Oxygen Analyzer.
HOOD OPTIONS :
Single wall Standard
Double wall Optional
Double wall Hood to decrease radiant heat loss
Standard Features
Single wall hood, Skin temperature thermistor probe,Air temperature thermistor probe, O2 inlet, Examination Light,
2 Access Doors, 2 Infant Restraint straps, 1 Iris port (optional), 3 Port doors, 4 Tubing ports, 6 Tubing ports (Optional),
O2 Failure Alarm (optional), Mattress, Side out mattress deck through head access door.
Specifications Battery specifications
Electronics : Micro Processor Based Design Incubator : Single Battery (Standard),
Modes of Operation : Skin Servo and Air Servo. Double battery (optional)
Hood : Single wall (standard) Type :12V, DC, 24AH Lead Acid.
Double wall (Optional)
Temperature Probe Battery Rating : Incubator maintains a differential of
Skin Probe : Thermistor Based 25 0C between ambient and set point for 3Hrs
Air Probe : Thermistor Based on one battery (or) 6Hrs on 2 batteries at full
Accuracy : +/-0.2 0 C heater power.
Probe Interchangeability Life expectancy : 200 complete charge/discharge
available : +/-0.2 0 C Cycles minimum
Charge Time : 10 hours per battery from full
Thermoregulation discharge.
0
Skin mode control range : 30-38 C Safety Alarms
Air mode control range : 23-390 C High temperature : If skin > 0.5 0 C from the set temp
Skin / Air Mode Skin low : If skin < 1 0 C from the set temp
Temperature resolution : 0.10 C Air temperature high : If skin > 0.5 0 C from the set temp
Skin / Air display Air low : If skin < 3 0 C from the set temp
reading range : 20-45 0C Sensor fail : If sensor fails
0
Temperature rise time : 100 C within 30 minutes. While Low Battery : If DC < 10.5 V DC
ambient Temperature is 250 C
0
Heater fail, Power fail, Air Flow fail, O2 Flow fail (optional), >39 C
A, 2D (or) 2E size tank mounting : The tank mount permits mounting Air/Skin temperature
gas cylinders with a diameter of up to (12 cms) and
up to (86 cms) in length. Silence/Reset : Silences the audible portion of
Humidity Pad : Sponge alarms for 15 minutes except power fail, sensor
IV stand : Height adjustable Stainless steel fail, heater fail, Air flow.
Examination Light : 11 W CFL with high intensity Electrical
Optional Features : Double wall hood, Pressure Regulator, AC Power Requirements : 230 V / 50 Hz.
Flow meter, Cylinder, Accessory shelf and Oxygen driven DC Power : 11-13 V/200 W (max)
Slow suction. Observation Lamp : CFL lamp 10 cm above mattress
O2 Concentration range : 21% to 58% minimum Physical characteristic
Humidity capacity : 50% to 70% With stand Without stand
Noise Level : < 60 dBA Height : Min: 96.3 cm Min: 56 cm
Max:132 cm
Performance Characteristics Width : 55 cm 49 cm
Humidity Pad : Holds 400 ml sterile water with no Length: 110 cm 97 cm
0
significant spillage for upto 45 tilt in either direction. Weight
Air filter : Removes >99% of air borne Single battery: 101.4 kg 71.4 kg
particle greater than 0.5 micron diameter. Distance from Bed to
Relative Humidity : 50% to 70% for 10-12 hours. Vertical hood 25 cm 25 cm
Collapsible Stand
Control Displays Material : Stainless Steel
ON/STAND BY : Illuminates when ON Mobility : 4 Nos. 6 inches castors (2 brakes)
Battery Condition Status : 4 LED indicators Collapsible : Yes
Power Mode : Illuminates AC, DC Gas spring : 4 nos.
Heater Power : 4 LED indicates heater power Environmental
25% to 100% Storage Temperature : - 20 0C to 60 0C ambient.
0
Skin Temperature C : Displays infant temperature Operational Range : Sea level to 3 kms (10,000 ft.)
0
Air Temperature C : Displays incubator air temperature non-pressurised environment. Sea level to 12
Air set Temp : Air set required temperature kms (40,000 ft) pressurized environment.
Skin set Temp : Skin set required temperature Relative Humidity
Operating range : 0% to 95% RH, non condensing
Alarm indicators : Air low, Air high, Skin low, Skin high,
Sensor fail, Heater fail, Air flow, Power fail, Low level battery, Test & Approval
0
Air/skin > 39 C, O2 failure. Quality standard : ISO 9001:2000& ISO 13485:2003
Electrical safety : IEC 60601-1
*Correct at time of printing. Manufacturer reserves the right to change specifications without prior notice.
nice - neonatal intensive care equipment
g
An ISO 9001:2000, 13485:2003 Company (with Design)
Regd. Office: No: 1. (159) Pallavan Street, Alwarthirunagar, Chennai-600 087
Healthcare Excellence Tel: +91- 44- 2486 0652 Fax: 044-2486 8821
Factory: # 85 Krishna Industrial Estate, Mettukuppam, Vanagaram, Chennai - 600 095 India.
Tel: +91-44-24762594, +91-44-24764608 Fax: +91-44-24766920, Mobile: 098408 71902
e-mail: info@niceneotech.com Web: www.niceneotech.com
