FSP 3000

Open, secure and efficient terascale networking

Today’s optical transport demands are constantly changing. High-bandwidth services and cloud-based
applications are booming and software-defined networking is evolving to the domain of transport
networks. Network operators and enterprises need a secure, flexible and scalable solution that increases
agility and automation, while keeping cost and footprint at a minimum.
Our FSP 3000 is a scalable optical transport solution designed to efficiently deal with this new environment, lowering its
complexity and minimizing cost-per-bit and operational efforts. With an open and modular design, our FSP 3000 supports
a wide range of services and applications, from data center interconnect (DCI) to carrier-optimized infrastructure solutions.
Incorporating the latest innovation in photonic networking and our innovative ConnectGuard™ low-latency encryption
technology, our FSP 3000 enables secure optical network solutions that can scale and accommodate tomorrow’s needs.
As the first commercial post-quantum cryptography (PQC) optical transport solution, our FSP 3000 now also protects data
against cyberattacks from quantum computers. Moreover, with a high-density and energy-efficient design for smallest
footprint and power consumption, our FSP 3000 meets the most stringent sustainability requirements.

Your benefits
o Scalability o Fully open and programmable
Ultra-high-speed wavelengths with up to 800Gbit/s Open line system (OLS) architecture and YANG-
per single-port line interface; 38.4Tbit/s duplex based APIs (OpenConfig) for network disaggregation
capacity per fiber pair with best-in-class metrics; up and easy integration into SDN-based environments
to 3.6Tbit/s duplex capacity per 1RU chassis
o Dynamic and scalable optical layer
o Flexibility Multiple ROADM options from a metro-optimized
From complete turnkey systems, including all 2-degree ROADM to multi-degree ROADMs for
equipment necessary for end-to-end transport flexgrid optical layer
applications, to disaggregated solutions
o Quantum-safe ConnectGuard™ encryption
o Pay-as-you-grow design Layer 1 encryption with ultra-low latency and 100%
Modular and scalable architecture that ensures both throughput, FIPS and CC certified; BSI approval; PQC
low initial cost and flexibility into the future cryptography with hybrid key exchange system
High-level specifications
General information Services Terminals

y Up to 38.4Tbit/s duplex y Wide range of native service y Fixed line (<=100Gbit/s) and
capacity per fiber pair types: Ethernet, OTN, SONET/ SW-defined (>=100Gbit/s)
y Point-to-point, ring and mesh SDH, ESCON, Fibre Channel, transponders/muxponders
topologies with optional FICON, Coupling Link, y Up to 400Gbit/s per 1-slot card
protection mechanisms Infiniband, audio and video y Up to 1.2Tbit/s per channel
y Open line system y Continuous data rate support y Up to 3.6Tbit/s per 1RU chassis
y Flexgrid support from 100Mbit/s to 425Gbit/s y 400 / 1200Gbit/s OTN switches
y Ensemble Controller and open y 10Gbit/s QSFP-based service
APIs for mgmt. and control multiplexer (MicroMux™)

Photonic layer architectures ConnectGuardTM encryption Power and environmental

y DWDM: up to 128 channels y Layer 1 AES-256 encryption y Highest energy efficiency, TEER-
y CWDM up to 16 channels y Dynamic key exchange <=4096 proven ecodesign
y Hybrid CWDM + DWDM bit keys every minute y Redundant power supplies for
y Wide variety of filters and y FIPS 140-2 and CC EAL-2 -48VDC or 100-240VAC PSUs
ROADM options up to 32 degree certified. BSI approval for y Variety of active and passive
y Coherent and direct detection German (“VS-V”) and NATO- chassis from 1RU to 12RU; 19in/
restricted (“NATO confidential”) ETSI/NEBS rack mounting
(PAM4) based solutions
data
y Optimized OLS for 400G ZR DCI
y Quantum-safe encryption via
y OTC and OTDR (ALM)
PQC or 3rd-party QKD attached

FSP 3000
Applications – Software-defined
in your network optical networking
Optical access Network infrastructure Data center interconnect

Distance
extension

Optical Open metro and core Hyperscale DCI

demarcation infrastructure

Passive
optical access Business continuity
Disaster recovery

Ensemble network management and control

Redefining connectivity – open, terascale capacity for the cloud

End-to-end network infrastructure DCI for cloud and business continuity applications
11
y Scalable system architecture for cost-effective access, y Terascale data center connectivity
metro and backbone optical network infrastructure y Open hardware architecture and YANG-based software
y Built-in access for optical timing channel (OTC) and OTDR (OpenConfig) modelling for easy integration into SDN-
(ALM) based environments

For more information please visit us at www.adva.com

© 07 / 2021 ADVA Optical Networking. All rights reserved.

Product specifications are subject to change without notice or obligation.

 FSP 3000 – technical information

Wavelength technologies Channel modules with SW-defined line optics

y CWDM: 16 wavelengths/20 nm according to ITU-T G.694.2 y Transponders (from 100G to 400G)
y DWDM schemes y Muxponders (aggregating services in the range from 10G
− 4, 8, 16, 40 channel, C-band, 100 GHz spaced to 400G)
− 80-channel, C-band, 50 GHz spaced y Add/drop multiplexers (dynamic routing of sub-aggregate
− 96-channel, C-band, 50 GHz spaced traffic 10G to 100G)
− 128-channel, C-band, 37.5 GHz spaced y OTN switch (for sub-aggregated services from 10G to
− Flexgrid with down to 6.25 GHz channel width 100G)
granularity
Optical layer
y Hybrid CWDM/DWDM
y Fixed filter from 1 to 128 channels WDM
Topologies y Reconfigurable optical add/drop modules (ROADM)
y Point-to-point from 1 to 32 degrees with multiple fixed, colorless,
y Point-to-multipoint directionless and contentionless add/drop structures
y Linear add/drop y Multiple amplifications solutions using Erbium fiber and/
y Multiplexed add/drop (drop and continue) or Raman amplifiers
y Ring (+ feeder + dual homing) y Automated optical layer with channel equalization and
y Hubbed-ring span loss equalization
y Meshed y Optical supervisory functions like optical channel
monitoring with full support of third-party wavelengths
Maximum distance
y Tailored solutions for access, metro and regional/long-
y Total optical transparent distance (without regeneration)
haul infrastructure (e.g., filterless OLS for coherent access,
>3500km
metro data center interconnect, etc.)
y Maximum span budget: 50dB with full channel load and
y Dedicated amplifier suite for direct detect and coherent
beyond 70dB with adapted capacity
signals (like SmartAmp™ designed for PAM4 solutions)
Services y Dedicated OLS optimized for 400G ZR DCI links at over
y Ethernet: FE, GbE, 10GbE (LAN and WAN), 25GbE, 40GbE, 25Tbit/s per fiber pair
100GbE and 400GbE
Common equipment
y ESCON and Fibre Channel/FICON 1Gbit/s, 2Gbit/s,
y 1RU, 2RU, 3RU, 4RU, 7RU, 9RU and 12RU shelf variants
4Gbit/s, 8Gbit/s, 10Gbit/s, 16Gbit/s and 32Gbit/s
y Power supply modules from 50 to 1200W (AC, DC, full
y InfiniBand 5G and 10G
redundant)
y STM-1, -4, -16, -64 / OC-3, -12, -48, -192
y Various controller modules (from compact to redundant
y OTU-1, -2, -3 and -4
and high performance)
y Uncompressed video (SD-SDI, HD-SDI, 3G-SDI)
y Multiple management interfaces (USB, RJ45, digital IO-
y CPRI up to 10Gbit/s
housekeeping)
Service protection
Equipment management
y Versatile protection
y Embedded CRAFT/CLI
y Channel protection
y Embedded web-based graphical user interface with
y Path protection
“point and click” provisioning via HTTPS
y Channel card protection
y Full support of SNMP, TL1, REST, NETCONF (OpenConfig)
y Client layer protection
y Streaming telemetry (gRPC)
Channel modules with fixed line format y Full support of FTP, SFTP, SCP, SSH, TELNET
y Transponders (from 1G to 100G) y Remote authentication via RADIUS or TACACS+
y Muxponders (aggregating services in the range from 100M y Equipment management using DCN or in-band
to 40G) management tunnels
y Add/drop multiplexers (dynamic routing of sub-aggregate y Enhanced user management with multiple security
traffic 100M to 40G services) options
y OTN switch (for 10G services) y Zero-touch provisioning methods using automated set-
up, scripting environment like Ansible and network-wide
profile management
y Use of augmented reality and equipment identification
for guided installation and fault identification

Product specifications are subject to change without notice or obligation.

© 07 / 2021 ADVA Optical Networking. All rights reserved. Page 3 of 4

 FSP 3000 – technical information

Laser safety Regulatory compliance

y Class1M laser product with hazard Level 1M y NEBS level 3
y Transport and storage:
Environmental y ETS 300-019-1-2 class 1.2 and 2.3
y Standard temperature (operating): +5°C to +40°C y Operation: ETS 300-019-1-3 class 3.1
y Extended temperature active (operating): -40°C to +65°C y Laser safety: IEC 60825-1, IEC 60825-2, ITU-T G.664-2012
y Extended temperature passive: -40°C to 85°C y EMC: CISPR 22, CISPR 24
y Relative humidity (non-condensing): 5% to 85% y Product safety: IEC 60950-1
(operating) / 5% to 90% (short-term) y RoHS 10: directive 2011/65/EU and Commission Delegate
y Outdoor enclosures for passive components Directive (EU) 2015/863
y WEEE: directive 2012 / 19 / EU, EN 50419:2006
y IP20. Use in a pollution degree 2 environment and indoor
controlled office environments only
y CE, FCC, NRTL, VCCI
y WCAG 2.0 certification for embedded web GUI
y Eco design ISO-14001:2015 certified

Product specifications are subject to change without notice or obligation.

© 07 / 2021 ADVA Optical Networking. All rights reserved. Page 4 of 4