SINGLE PHASE SMART METER

SEM610X

GENERAL
SEM610X Single Phase Meter is a new
generation of single phase smart meter. It
supports active & reactive energy measure-
ment, instantaneous measurement, relay dis-
connection and reconnection management.
With an optional plug-and-play PLC/RF/
GPRS communication module, the meter can
be used in sophisticated AMI & vending sys-
tem.

MAIN FEATURES
 Complying to IS 16444 standards for metering requirement

 Complying IS 15959 part-2 standard for DLMS

 Full smart functionality

 Bidirectional measurement of instantaneous, energy and demand parameters

 Data logging for instantaneous parameters, billing parameters and block load profile

 Tamper events detection, recording and reporting

 Event logging available with active energy, voltage and current snap shots

 Power fail alerts (last gasp) and power resume information (first breath) available

 Load connection/disconnection through latching relays for both phase and neutral

 Communication options including optical, RF, PLC and GPRS

 Bidirectional communication with push feature as well as on demand reading

 Remote firmware upgrade

 Net metering feature available

 Prepaid function as per IS 15959 part-2(optional)

SINGLE PHASE SMART METER
SEM610X
MAIN FUNCTIONALITIES
Measurement Smart features
 Unidirectional or bidirectional measurement Events & Alarms
 Cumulative energy  Load and power grid events detection
 Record active & reactive energy (optional) in  Under voltage, over voltage, over current, and
tariffs over load
Instantaneous values  Power failure and power resume
 Power, voltage, current  200 event records with date and time
 Power factor, frequency  Alarms for events and tampers
Display  Alarms indication (LED & Buzzer) (optional)
 Large digit LCD display with backlight Load control
 Scrolling display and push button display con-  Load disconnection provided for:
figurable  over voltage, over current and over load
 Display readable without main power (RWP)  Selected tamper (optional)
 Tamper and relay status shown as ICON  Command from utility through remote commu-
 Impulse LED available for kWh and kVArh nication
Tariff Relay
 Single/TOU  Provided in both phase and neutral complying
 Up to 4 registers, configurable profiles and sea- to IS15884 UC1/UC2/UC3
sons  Status of relay connect /disconnect available on
Daily profile display and data downloading
 Daily profile for 35 days  Connect/disconnect of relay are logged as
 Energy events and available for downloading
Billing profile Demand Monitoring
 Billing profile for 6 months  Block/slide mode (optional)
 Energy, average PF, maximum demand  Demand interval configurable
Load profile  Maximum demand with time stamp
 Up to 1 Megabytes of Non-Volatile memory  Historical value (optional)
 Max 35 days storage (30 minutes) Security
 Energy, voltage, current  Multi-level password for data reading and pro-
RTC gramming for all available ports
 2 data access levels (LLS and HLS)
 Clock accuracy (daily deviation): ≤ 0.5S (23℃)
 Encryption of data AES –128 standard
 RWP (Read Without Power)
Communication
 Replaceable Lithium Batter (10 years support)
 Optional port for local communication
Anti tamper
 RF/PLC/GPRS Plug and play communication
 4 sealing positions (terminal, bosy)
module
 Meter cover and terminal cover open detection
 RF module with Wi-Sun Sub GHz transceiver
 Bypass/reverse current
 PLC with G3-PLC band 150kHz – 450kHz
 Neutral missing/neutral disturbance
 GPRS support 2G/3G network
 Strong magnetic field detection
 Protocol: DLMS as per IS15959 part1 & part2
standard
 Push and remote firmware update available
 Prepaid function as per IS15959 part2 standard
(optional)
 SINGLE PHASE SMART METER
SEM610X
SPECIFICATION
Application Direct Connection
Accuracy Active: Class 1 as per IS16444
Nominal voltage 1P2W 220V, or 230V, or 240V
Ib/Iref 5A, 10A
Current range
Imax 40A, 60A, 80A,100A
Starting current 0.2% Ib
Frequency 50/60Hz
Voltage circuit <2W, <10VA
Power consumption
Current circuit <4VA
Operation -25oC to +55oC
Temperature range Storage -40oC to +70oC
Limit -40oC to +70oC
Humidity range Up to 95%
Protection degree IP51
Contact discharge 8 kV
Electro static discharge
Air discharge 15 kV
Fast transient burst 4 kV
Surge immunity 4 kV
EMC Frequency range 80MHz to 2000 MHz
Electromagnetic RF Field With voltage 10V/m
Without voltage 30V/m
Frequency range 150kHz to 80MHz
Conducted disturbance
Voltage level 10V
Impulse voltage 6 kV 1.2/50µS
Insulated strength
AC Voltage 4 kV 1 min
IS13779
IS16444
Standards IS
IS15884
IS15959 part 1 and part 2
6 parameters (voltage, current,and bidirectional
Data storage Load profile
energy)
Billing data 6 billing periods
Case material Polycarbonate + Glass filled fiber (terminal block)
Terminal cover Long/short cover
Φ9mm for 60A, Φ12mm for 100A 1(Brass mate-
Connection hole Terminal
rial)
Without communication
Weight 2.1kg Approx
module
With communication mod-
2.2kg Approx
ule
Dimension 265 x 141 x 85mm (L x W x D)
SINGLE PHASE SMART METER
SEM610X
DIMENSIONS

CONNECTION

Symmetric Connection Asymmetric Connection

INDUSTRIAL CONTROL & DRIVES PVT.LTD

NO.33, METTUKUPPAM ROAD, (VIA) ALAPAKKAM ROAD
MADHURAVOYAL, CHENNAI 600095, TAMILNADU, INDIA
TEL : +91 44 42934322, 4293 4324, 4293 4335
EMAIL : sales@icdipl.net, Web: www. Icdipl.net