Crowned tooth gear couplings

TYPE MT
 JAURE®.
JAURE® is a leading supplier of couplings and power
transmission solutions. Experience, manufacturing program,
innovation and close cooperation with leading International
companies in the business enables JAURE® to provide

Experience, innovation
customized solutions to our customers.

For over 50 years, JAURE® has developed couplings for the most
demanding applications in marine, wind energy, steel, railway

and close cooperation

and paper industries among others.

Our manufacturing program covers a complete range without

boundaries in power and speed, and we continue developing
new products for future challenges.

with leading international JAURE® is part of Regal Power Transmission Solutions, a division
of Regal Beloit Corporation. Regal Power Transmission Solutions
is comprised of 8 brands: Browning, Jaure, Kop-Flex, McGill,

companies. Morse, Rollway, SealMaster and System Plast. Particularly

the integration of Kop-Flex and Jaure coupling businesses
has strengthened Jaure’s presence worldwide and has added
application expertise to provide answers, products and service
to our customers on a global basis.

2 ® ®
3
 MT Gear JAURE MT Crowned Tooth Gear Couplings Main advantages of MT gear couplings

Coupling Jaure was founded in Spain in 1958 as a machining workshop in one of the most
industrialized areas with strong steel and iron tradition. Jaure’s flexible coupling
Jaure® couplings offer maximum torque capacity. This is due to the optimum pitch
diameter of the gears, providing reliability.

Introduction manufacturing activity as it is known nowadays started back in 1970 with the production
of the first gear coupling MS model. High permissible hub bore allows more favorable size selection of the coupling for a
certain shaft diameter. This offers an important economic saving.
Along the last 50 years, the design of Jaure gear coupling has been continuously improved
High permissible additional loads for starting and short-circuit peak torque.
from, MS serie, to MN, then HA until the nowadays known Jaure MT gear coupling.

Highest gear accuracy and quality thanks to the production improvements obtained
Below equivalences of the various models of Jaure gear coupling:
with new CNC gear cutting machines and automatic charge systems.

The design, manufacture and sale of all Jaure's gear couplings and drive components
Industrial MT Marine MT HA MS MN
are integrated into Jaure's Quality System. This is according to ISO 9001 and certified by
52 42 10 5 5
DET NORSKE VERITAS (DNV).
62 55 15 10 10
78 70 20 20 20
The Jaure MT standard range meets the AGMA standard, meaning that the MT
98 90 25 35 35
coupling sleeves and drilled holes will fit any AGMA coupling halves. This ensures the
112 100 30 60 60
interchangeability by coupling halves.
132 125 35 105 105
156 145 40 150 150 Custom made couplings
174 165 45 210 210
Special designs according to customer needs often come from close co-operation with
190 185 50 325 325
our R&D and Engineering departments. Special solutions are normally based on the use
210 205 55 430 430
of special seals and alloyed steels subjected to surface hardening treatments, such as:
233 230 60 600 600
275 260 70 800 800 Nitriding
Case carburizing
Induction hardening

In addition to our R&D department validation procedures, MT gear couplings are

analysed by specific software based on FEA. JAURE also collaborates with Technological
Centres, which combined with our worldwide network of technical experts, enables us
to provide innovative engineered solutions to our customers.

Marine Type Approval & Manufacturing Survey Arrangement

The Jaure MT gear couplings can be also delivered on demand with the 3.2 certificate of
any Marine Classification Society.
Thousands of Jaure gear couplings are operating today in the toughest applications such
Jaure is besides awarded with the Manufacturing Survey Arrangement – MSA from DNV.
as steel mills, pulp and paper, mining, cement, marine drives, wind turbines, etc.
The MSA certificate is our commitment to continuously improve the service and respon-
se time to our customers and remain competitive in the market place.
MT gear couplings are the most compact coupling solution for critical applications that
demand high torque transmission.

4 ® ®
5
 Summary of Contents
JAURE MT GEAR COUPLING Page MTCO With Axial Stroke 30
Description 8
Coupling Selection 10
Balancing 12
Critical Speed 14 MTES Disengaging 31
Service Factors 15
Coupling design Type Description Page

INDUSTRIAL DESIGNS MTB With Shear Pins 32

MT / MT-HD Basic Design Standard / Heavy Duty 17

MTNBR With Shear Pins 33

MTT / MTT-HD With Covers Standard / Heavy Duty 18

PLMT Rigid 34

MARINE DESIGNS
MTS With Single Sleeve 19

MT / MT-HD Basic Design Standard / Heavy Duty 36

MTG / MTG-HD Basic Design Standard / Heavy Duty 20

MTG / MTG-HD Basic Design Standard / Heavy Duty 37

MTV Vertical Installation 21

MTD / MTD-HD With Floating Shaft Standard / Heavy Duty 38

MTX / MTX-HD With Spacer Standard / Heavy Duty 22 Complete MTGD coupling

a
l1 l

Ød2
Ød1
MTGD / MTGD-HD With Intermediate Floating 39

ØD1
Ød1
ØD3

ØD2
Ød3
ØD
Shaft Standard / Heavy Duty
MTGX / MTGX-HD With Spacer Standard / Heavy Duty 23 Half MTGD coupling l1 DBSE (4) l2

MTX / MTX-HD With Spacer Standard / Heavy Duty 40

MTD / MTD-HD With Floating Shaft Standard / Heavy Duty 24

Complete MTGD coupling

MTGX / MTGX-HD With Spacer Standard / Heavy Duty 41
a
l1 l
Ød2
Ød1

MTGD / MTGD-HD With Intermediate Floating 25

ØD1
Ød1
ØD3

ØD2
Ød3
ØD

Shaft Standard / Heavy Duty

Half MTGD coupling l1 DBSE (4) X
12,7
l2 MTFFY
MTX-LI Oil Lubricated With Spacer 42
S

MTFF With Intermediate Brake Disc 26

l1 a l2
Ød1

Ød2
ØD1
ØD2
ØD

a1
ØDF

and Axially Limited

MTD-LE Lubricated With Floating Shaft 43

MTFS With Brake Disc 27

MTV Vertical Installation 44

MTF With Intermediate Brake Drum 28

OTHER INFORMATION Page
Shaft Connection Types 46
Shaft / Bore Fits 47
MTFE With Side Brake Drum 29 Axial Forces Calculation 47
MT Designs 48
MT References 52

6 ® ®
7
 MT Gear The MT gear coupling is a steel double-joint coupling. Main function is to transmit Coupling size for certain drive depends not only on the drive unit power and speed,
torque and at the same time accommodate the misalignment between two shafts. but also on the misalignment and the type of machines to be coupled.
Coupling
The MT coupling is torsionally stiff and formed by two crowned hubs which engage two Three types of misalignment can be effectively accommodated by the MT gear
Description flanged sleeves with internal straight parallel teeth (see coupling parts at Fig nº1). coupling (see Fig. nº3):

Axial: Shafts are aligned but shaft ends are apart from each other.
1 6 2 11 18 12 2 1 1 6 17 4 11 10 13 14 5 7 16 15 1 1) Hub Parallel Offset: Axes of connected shafts are parallel, but not in the same straight line.
2) Sleeve
3) Sleeve Angular: Axes of shafts intersect at center point of coupling, but not in the same straight line.
4) Sleeve (male)
5) Sleeve (female)
6) O-ring
7) Cover
8) Gasket
9) Oil plug
10) O-ring
11) Bolt
12) Nut
13) Washer
14) Nut
15) Screw
8 9 16) Grower washer
9 8
17) O-ring
18) Sealing paper
Size MT 52-275 Size MTG 280-1200

Fig nº1. Coupling components

Axial Offset Angular Axial, offset
and angular

As a result of the teeth curvature, if shafts misalignment occurs, the crowned teeth hubs
can oscillate in the flanged sleeve (see Fig nº2).
Fig nº3. Shaft misalignment

It is impossible to have corner pressure even at maximum misalignment. The combined

tip and flank centering and fully machined coupling ensure smooth operation. Proper maintenance of gear couplings is key to avoid early wear of the gear teeth
and extend the coupling’s life. It is necessary to strictly follow the installation and
In case of high rotation speed (circumferential speeds exceeding 40 m/s or sensitive maintenance instructions.
supports to unbalance) dynamic balancing is required.

The MT gear coupling must be filled with grease periodically. Therefore, the lubrication
The teeth are machined with precision gear machines in order to assure uniform contact is forced into the teeth by centrifugal force. Seals are provided in the sleeves/covers to
on all the teeth. prevent any grease leakage. They can be used at -30°C to 70°C temperature range.
For other temperature, please contact Jaure.

The gear couplings are made in C45/55 material as a standard. If a more compact
coupling or higher power ratio is required, Jaure Heavy Duty Type (HD) in alloy steel is
available in our program.
 
In addition other special designs with heat treatments such as induction hardening,
gas nitriding, case hardening, etc can be delivered on demand. Please contact our
engineering or sales departments.

For more detailed information refer to Jaure instruction manual.

Fig nº2. Detail of the crowned teeth with angular misalignment

8 ® ®
9
 Coupling For MT standard design selection, the following data is required: Selection procedure

Selection -PN, Installed or absorbed power (Kw)

1) Calculate nominal torque TN (Nm) as follows:

PN . K
-n, operating speed (rpm) T= 9550
n . Fα

-L, d shaft lengths and diameters (mm)

PN= Max. actual power in (Kw)
-DBSE distance between shaft ends (mm) n= Coupling speed in (rpm.)

-Service requirements (K service factor from page 15) K= Service factor

Fα = Misalignment factor
-Dynamic misalignment (Fα misalignment factor from Fig nº4)
Select coupling size from catalogue with nominal torque capacity same or higher than
-Additional geometrical or atmospheric restrictions obtained. Check if the peak torque of the application is below the coupling max. torque
(TPmax).
Torque Capacity varies with speed and dynamic misalignment. A coefficient
2) Check in the catalogue maximum bore capacity for selected coupling. Should shafts
(fα = Coefficient factor from dynamic misalignment and speed) is required over
be larger than the maximun admissible bore, select next bigger necessary size diameter.
0,1 degrees of misalignment and is affected in the following trend:
3) Check shaft/hub connection is able to transmit the torque. If necessary, extend the
hub length.
4) Speed given in catalogue is maximun value for unbalanced couplings. For higher
1
operational speed the coupling must be dynamically balanced and other materials than
0,9
carbon steels might be used. Please contact Jaure engineering for support.
0,8
5) Selection Service Factors (K): Recommended service factors are given on page 15.
0,7 The service factor can vary for each application and depending among other on:
0,6 a. Type of driving and driven machine
Fα 0,5 b. Reversing / Non-reversing load
c. Peak torques
0,4

0,3
Example:

0,2 Find a coupling to connect a gearbox with the drum of a conveyor.

Motor power PN = 400Kw.
0,1
Peak torque: 7200Nm
0
0,1 0,2 0,3 0,4 0,5
Drum speed n = 1.000 r.p.m.
Angular Misalignment (degrees)
Gearbox shaft d1 = 80mm.
Drum side shaft d2 = 100mm.
Fig. nº 4 Trend of Coefficient with Dynamic Misalignment and Speed Dynamic misalignment < 0,1 degrees. Fα=1
Service Factor for Conveyor Heavy Duty Not Uniformly Fed Assembly in page 15, K=1.25

Solution:
n = n_max 400.1,25
T=9550 =4775Nm
n = 0.6.n_max 1000.1
Nominal torque needs to be checked as a first step. From MT basic design, we would
n = 0.4.n_max
select MT-78. Secondly, we need to check maximum shaft capacity for selected size.
n = 0.15.n_max
This would lead to the selection of MT-112, as the drum shaft diameter is 100 mm.
Check that Peak Torque of application 7200 Nm is bellow selected coupling limit
(28200 in this case).
Above graph shows one gear mesh misalignment.
With this selection, resulting Service factor can be calculated:
Since
Values shown in the graph are indicative. For accurate calculation or higher angular
PN 400
misalignment please contact Jaure. T application = 9950 = 9550 = 3820Nm
n 1000
Resulting Service Factor can be calculated as
14000
K= =3,67
3820

10 ® ®
11
 Balancing Coupling Balance requirements and limits are mainly dependent upon the characteristics Balancing Minimum applications data required for chart interpretation:
of the application. For this reason balancing charts should be used as a guide only to
assist in determining whether balancing is required or not. 1. ISO balancing Grade for the coupling. (G)
2. Application Speed (n)
Balancing chart is shown for average applications. For sensitive or critical application,
This information allows to calculate the permissible eccentricity (e permissible)
contact Jaure for coupling balance requirement. for the coupling.

Balance Chart for non spacer type gear couplings e permissible = 9550.G/n

Where,
1000
e permissible = Permissible eccentricity of center of gravity in µm.

Eccentricity in (μm)
e coupling = Actual eccentricity of center of gravity of coupling in µm.
Permissible G = Balance Grade in mm/s
n = Application speed in rpm.
100 In order to satisfy the application requirement, e coupling ≤ e permissible.

50

Balancing Practices
10
Jaure couplings are dynamically balanced in component level or in sub-assembly.

5 In case of sub-assembly balancing level, major components are match-marked to ensure

the proper reassembly of the coupling.
Hubs are component balanced at finished bore without keyways unless mentioned
1
in the order.

10000
1000

5000
100

500

Application Speed (RPM) On special request from customer, assembly balancing of gear coupling including gear

Fig. nº 5 hubs can be performed.

Balancing reports will be available for customer under request.
Balance Chart for intermediate shaft couplings up to 1000mm of DBSE
(For higher DBSE please refer to Jaure) Example:

1000
Coupling Type – Spacer type Gear Coupling.
Eccentricity in (μm)

DBSE – 600 mm
Permissible

Required Balance Quality – 6.3

Application Speed – 1800 rpm
100
As per the chart, we require to perform the superior balancing for the spacer
50 coupling to achieve the 6.3 balancing grade as per ISO-1940-1.

Alternatively:
10
e permissible = 9550.G/n
5 = 9550. (6.3)/1800
= 33,4 µm
Color codes for Balancing Condition:

1 Standard From the chart (Y-axis) for 33,4 µm permissible eccentricity, coupling requires
10000
1000

1800

5000
100

500

Fine Superior balancing.

Superior
Application Speed (RPM)
Under request

Fig. nº 6

12 ® ®
13
 Critical Speed Critical speed needs to be checked for intermediate shaft couplings. Recommended
Service Factors (K)
Note: For an approximate calculation the spacer/shaft length can be used
instead of the distance between gear mesh.

Typical Typical
Fig nº7 Values listed are intended only as a general guide, and Application: Service Application: Service
Factor Factor
Critical speed for intermediate shaft couplings type MTX and MTXCO. are typical of usual service requirements. For systems
GENERATORS
which frequently utilize the peak torque capability of (Not Welding) 1.0 Pebble & Rod 2.0
the power source, verify that the magnitude of this peak HAMMER MILLS 2.0 Pug 1.75
LAUNDRY WASHERS Tumbling Barrels 2.0
torque does not exceed the 1.0 Service Factor Rating
Reversing 2.0 MIXERS
of the coupling selected. Applications which involve 2.0 Concrete Mixers 1.75
LAUNDRY TUMBLERS
extreme repetitive shock or high-energy load absorption LINE SHAFT 1.5 Drum Type 1.5
characteristics should be referred -with full particulars- LUMBER INDUSTRY OIL INDUSTRY

Distance between gear mesh (mm)

Barkers-Drum Type 2.0 Chillers 1.25
to JAURE. 1.75
Edger Feed 2.0 Paraffin Filter Press
Live Rolls 2.0 PAPER MILLS
Values contained in the table are to be applied to Log Haul-Incline 2.0 Barker Auxiliaries, Hydraulic 2.0
Log Haul-Well type 2.0 Barker, Mechanical 2.0
smooth power sources such as electric motors and
Off Bearing Rolls 2.0 Barking Drum Spur Gear Only 2.25
steam turbines. For drives involving internal combustion Planer Feed Chains 1.75 Beater & Pulper 1.75
engines of four or five cylinders, add 1.0 to the values Planer Floor Chains 1.75 Bleacher 1.0
Planer Tilting Hoist 1.75 Calenders 2.0
listed; for six or more cylinders, add 0.5 to the values Slab Conveyor 1.5 Chippers 2.5
listed. For systems utilizing AC or DC Mill Motors as the Sorting Table 1.5 Coaters 1.0
prime mover, refer to Note (1). Trimmer Feed 1.75 Converting Machines except Cutters, Platers 1.5
MARINE PROPULSION Couch Roll 1.75
Main Drives 2.25-2.5 Cutters, Platers 2.0
CAUTION: All people moving applications must be Cylinders 1.75
MACHINE TOOLS
referred to engineering. Bending Roll 2.0 Disc Refiners 1.75
Plate Planer 1.5 Dryers 1.75
Punch Press - Gear Driven 2.0 Felt Stretcher 1.25
® Tapping Machines 2.5 Felt Whipper 2.0
Other Machine Tools Jordans 1.75
Typical Main Drives 1.5 Line Shaft 1.5
Application: Service Auxiliary Drives 1.25 Log Haul 2.0
Factor Pulp Grinder 1.75
METAL MILLS
AGITATORS Press Roll 2.0
Draw Bench - Carriage 2.0
Speed (1/min) Pure Liquids 1.0 Draw Bench - Main Drive 2.0
Reel
Stock Chests
1.5
1.5
Liquids & Solids 1.25 Forming Machines 2.0
Liquids - Variable Density 1.25 Suction Roll 1.75
Slitters 1.5 Washers & Thickeners 1.5
BLOWERS Table Conveyors
Winders 1.5
Centrifugal 1.0 Non-Reversing 2.25 PRINTING PRESSES 1.5
Ex.: MTX-98 with a spacer of 3575 mm can rotate at a speed maximum 1000 rpm Lobe 1.5 Reversing 2.5 PULLERS - Barge Haul 2.0
Vane 1.25 Wire Drawing & Flattening Machine 2.0 PUMPS
BRIQUETTE MACHINES 2.0 Wire Winding Machine 1.75 Centrifugal 1.0
CAR PULLERS - Intermittent Duty 1.5 METAL ROLLING MILLS (NOTE1) Boiler Feed 1.5
Fig nº8 COMPRESSORS Blooming Mills * Reciprocating
Centrifugal 1.0 Coilers,hot mill 2.0 Single Acting
Critical speed for intermediate shaft couplings type MTD. Centriaxial 1.25 Coilers cold mill 1.25 1 or 2 Cylinders 2.25
Lobe 1.5 Cold Mills 2.0 3 or more Cylinders 1.75
Reciprocating-Multi-Cylinder 2.0 Cooling Beds 1.75 Doble Acting 2.0
CONVEYORS-LIGHT DUTY UNIFORMLY FED Door Openers 2.0 Rotary, Gear, Lobe, Vane 1.5
Apron, Bucked, Chain, Flight, Screw 1.25 Draw Benches 2.0
RUBBER INDUSTRY
Assembly, Belt 1.0 Edger Drives 1.75
Mixer - Banbury 2.5
Oven 1.5 Feed Rolls, Reversing Mills 3.5
Rubber Calendar 2.0
Furnace Pushers 2.5
CONVEYORS-HEAVY DUTY NOT UNIFORMLY FED Rubber Mill ( 2 or more) 2.25
Hot Mills 3.0

Distance between gear mesh (mm)

Apron, Bucket, Chain, Flight, Over 1.5 Sheeter 2.0
Ingot Cars 2.5
Assembly, Belt 1.25 Tire Building Machines 2.5
Kick-outs 2.5
Reciprocating, Shaker 2.5 Tire & Tube Press Openers 1.0
Manipulators 3.0
CRANES AND HOISTS (NOTE 1 and 2) Tubers & Strainers 2.0
Merchant Mills 3.0
Main hoists, Reversing 2.5 Piercers 3.0 SCREENS
Skip Hoists, Trolley & Bridge Drives 2.0 Pushers Rams 2.5 Air Washing 1.0
Slope 2.0 Reel Drives 1.75 Grizzly 2.0
CRUSHERS Reel Drums 2.0 Rotary - Stone or Gravel 1.5
Ore, Stone 3.0 Reelers 3.0 Traveling Water Intake 1.25
Rod and Bar Mills 1.5 Vibrating 2.5
DREDGES
Cable Reels 1.75 Roughing Mill Delivery Table 3.0 SEWAGE DISPOSAL EQUIPMENT
Conveyors 1.5 Runout Tables Bar Screens 1.25
Cutter Head Jig Drives 2.5 Reversing 3.0 Chemical Feeders 1.25
Maneuvering Winches 1.75 Non-Reversing 2.0 Collectors, Circuline or Straightline 1.25
Pumps 1.75 Saws, hot & cold 2.5 Dewatering Screens 1.25
Screen Drives 1.75 Screwdown Drives 3.0 Grit Collectors 1.25
Stackers 1.75 Skelp Mills 3.0 Scum Breakers 1.25
Utility Winches 1.5 Slitters 3.0 Slow or Rapid Mixers 1.25
Slabbing Mills 3.0 Sludge Collectors 1.25
ELEVATORS (NOTE 2) Soaking Pit Cover Drives 3.0 Thickeners 1.25
Bucket 1.75
Straighteners 2.5 Vacuum Filters 1.25
Centrifugal & Gravity Discharge 1.5
Tables, transfer & runout 2.0 STEERING GEAR 1.0
Escalators 1.5
Thurst Block 3.0 STOKERS 1.0
Freight 2.5
Traction Drive 3.0 WINCH 1.5
FANS Tube Conveyor Rolls 2.5 WINDLASS 1.75
Centrifugal 1.0 Unscramblers 2.5
Speed (1/min) Cooling Towers 1.5 Wire Drawing 1.5 *Refer to JAURE.
Forced Draft 1.5
MILLS, ROTARY TYPE Notes:
Induced Draft without Damper Control 2.0 2.25
Ball
FEEDERS 2.0 (1) Maximun Torque at the coupling must
Dryers & Coolers
not exceed Rated Torque of the coupling.
Ex.: MTD-78 with an intermediate shaft of 2350 mm can rotate at a speed maximum 1000rpm Apron, Belt, Disc, Screw 1.25 Hammer 1.75
Reciprocating 2.5 Kilns 2.0 (2) Check local and industrial safety codes.

14 ® ®
15
 Industrial MT/MT-HD
Basic Design Industrial

designs F
S

E
MTY

Reversed Hub

a1
a
l1 l2
MTYY

øD2

øD1
ød1

ød2
øD
Reversed Hub Reversed Hub

a2

Designation example
example: MT-132 Basic design
MT-Y-132 One reversed hub
MT-YY-132 Two reversed hubs

MT MT-HD
MOMENT
TN TP TN TP n MAX GENERAL DIMENSIONS WEIGHT WEIGHT OF GREASE
SIZE NOMINAL MAX NOMINAL MAX (8) Max. (5) Min. (6) INERTIA QTY. (7)
(1) (1) (1) (1) (5)

MT d1-d2 2
Nm Nm Nm Nm rpm D D1 D2 (Min-Max) l1-l2 a a1 a2 E F S(4) kg kg J (kgm ) kg
MT-HD (2)(3)

52 1.780 3.600 2.937 5.940 8.600 111 82,5 69 14-52 43 3 5 7 1,5 39 57 4 3 0,005 0,03

62 2.790 5.520 4.604 9.108 7.000 141 104,5 85 17-62 50 3 8 13 1,5 46 64 8 6 0,016 0,06

78 5.600 11.100 9.240 18.315 5.800 171 127,5 107 20-78 62 3 14 25 1,5 61 76 14 10 0,040 0,09

Jaure gear couplings are used in a variety of demanding applications 98 8.500 17.400 14.025 28.710 4.700 210 156 133 26-98 76 5 12 19 2,5 69,5 92 26 18 0,11 0,14

since  years. Paper mill, cranes, pumps, conveyors and any process in 112 14.000 28.200 23.100 46.530 4.200 234 181,5 152 30-112 90 5 24 43 2,5 84,5 108 39 26 0,20 0,29

a steel, aluminum or cooper mill  are just some of the examples where 132 23.000 45.600 37.950 75.240 3.600 274 210,5 178 35-132 105 6 27 48 3 96 125 58 42 0,45 0,42

Jaure gear couplings are performing successfully. 156 35.100 69.600 57.915 114.840 3.200 312 248,5 209 70-156 120 6 32 58 3 109 140 91 61 0,88 0,60

  174 44.400 88.000 73.260 145.200 2.900 337 274 234 85-174 135 8 37 66 4 123 162 115 77 1,33 1,04
Numerous designs and coupling sizes are available.  The custom-made 190 68.500 139.600 113.025 230.340 2.600 380 308,5 254 95-190 150 8 50 92 4 142,5 180 165 115 2,48 1,73
gear coupling offering is developed in close collaboration with the 210 84.600 167.600 139.590 276.540 2.400 405 334 279 110-210 175 8 52 96 4 154,5 205 211 142 3,59 2,48
customer. 233 151.000 304.000 249.150 501.600 2.200 444 365,5 305 120-233 190 8 58 108 4 166,5 218 260 167 5,00 3,46

275 205.500 407.000 339.075 671.550 2.000 506 424 355 130-275 220 10 72 134 5 193,5 252 411 252 10,39 5,31

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

Technical modifications reserved

16 ® ®
17
 MTT/MTT-HD MTS
With Covers Industrial With Single Sleeve Industrial

S S

l1 l2 l1 l2
a a

D1

D1
d1

d2

d1
D

d2
B
B

Size MTS 22-260 Size MTS 280-800

Designation example: MTS-145

Designation example: MTT-132 Basic design
MTT-Y-132 One reversed hub SIZE TN NOMINAL
(1)
TP MAX
(1)
n MAX
(8)
GENERAL DIMENSIONS WEIGHT
MAX. (5)
WEIGHT
MIN. (6)
MOMENT OF
INERTIA (5)
GREASE QTY.
(7)
MTT-YY-132 Two reversed hubs 2
MTS Nm Nm rpm D D1 B d1-d2 l1-l2 a S(4) kg kg J (kgm ) kg
(Min-Max) (2)(3)

22 500 1.000 12.000 56 36 47 8-22 30 4 57 0,88 0,73 0,0003 0,006

32 650 1.300 10.500 70 48 56 10-32 40 4 71 1,80 1,34 0,001 0,011

MTT MTT-HD
MOMENT
SIZE n MAX GENERAL DIMENSIONS WEIGHT WEIGHT OF GREASE 38 750 1.500 9.500 80 56 68 14-38 45 4 84 2,71 2,02 0,002 0,017
TN TP TN TP
NOMINAL MAX NOMINAL MAX (8) Max. (5) Min. (6) INERTIA QTY.(7)
(1) (1) (1) (1) (5) 50 1.150 2.300 9.000 96 68 74 18-50 55 6 91 4,68 3,20 0,005 0,024

55 2.600 5.200 7.000 112 80 85 20-58 70 6 108 7,84 5,28 0,011 0,05
MTT d1-d2 2
MTT-HD Nm Nm Nm Nm rpm D D1 D2 (Min-Max) l1-l2 a a1 a2 E F S(4) kg kg J (kgm ) kg 70 5.000 10.000 5.600 140 101 106 20-75 80 6 130 14,88 9,65 0,033 0,04
(2)(3)

52 1.780 3.600 2.937 5.940 8.600 119 90,2 69 14-52 43 3 5 7 1,5 39 57 5 4 0,007 0,03 90 8.600 17.200 4.700 164 124 116 25-95 95 8 145 24,41 14,51 0,073 0,06

62 2.790 5.520 4.604 9.108 7.000 147 109,6 85 17-62 50 3 8 13 1,5 46 64 9 7 0,018 0,06 100 14.000 23.000 4.200 185 143 120 30-105 105 8 150 34,10 20,84 0,128 0,10

78 5.600 11.100 9.240 18.315 5.800 179 135 107 20-78 62 3 14 25 1,5 59,5 80 16 12 0,048 0,13 125 20.600 41.200 3.600 215 170 130 35-130 120 8 165 53,56 29,71 0,270 0,13

98 8.500 17.400 14.025 28.710 4.700 220 166 133 26-98 76 5 12 19 2,5 69,5 96 30 21 0,13 0,28 145 33.000 66.000 3.150 255 205 150 45-150 135 10 195 85,52 51,29 0,622 0,14

112 14.000 28.200 23.100 46.530 4.200 242 188,6 152 30-112 90 5 24 43 2,5 82,5 108 42 29 0,22 0,28 165 45.600 91.200 2.860 280 216 170 55-165 150 10 215 109,66 64,70 0,963 0,35

132 23.000 45.600 37.950 75.240 3.600 284 220 178 35-132 105 6 27 48 3 96 128 69 48 0,56 0,4 185 61.400 122.300 2.580 317 250 190 60-190 170 10 245 163,18 94,56 1,835 0,44

156 35.100 69.600 57.915 114.840 3.200 315 252,5 209 70-156 120 6 32 58 3 106,5 140 93 64 0,89 0,6 205 80.800 161.600 2.320 345 275 210 70-210 185 12 275 213,28 122,32 2,873 0,53

174 44.400 88.000 73.260 145.200 2.900 340 279 234 85-174 135 8 37 66 4 123 165 118 80 1,37 1 230 105.500 211.000 2.200 374 300 226 100-230 200 12 295 260,76 152,57 4,263 0,77
190 68.500 139.600 113.025 230.340 2.600 380 308,5 254 95-190 150 8 50 92 4 139,5 181 164 114 2,38 1,7 260 161.000 322.000 2.000 414 340 266 115-260 230 12 355 374,87 217,46 7,659 1,51
210 84.600 167.600 139.590 276.540 2.400 408 341 279 110-210 175 8 52 96 4 154,5 209 216 147 3,60 2,5 280 220.000 440.000 1.800 465 370 275 140-280 250 16 345 446 355 11,12 2,83
233 151.000 304.000 249.150 501.600 2.200 444 372 305 120-233 190 8 58 108 4 166,5 224 261 168 4,99 3,5 310 250.000 500.000 1.600 505 410 295 160-310 270 16 375 558 441 16,21 3,36
275 205.500 407.000 339.075 671.550 2.000 506 427 355 130-275 220 10 72 134 5 193,5 257 408 249 9,96 5,3 345 320.000 640.000 1.500 548 450 315 180-345 290 16 400 712 557 25 3,54

370 400.000 800.000 1.400 588 490 350 210-370 325 20 450 906 720 37,5 4,83

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please, 390 510.000 1.020.000 1.300 640 520 370 230-390 345 20 480 1.100 889 53,25 6,94
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
420 660.000 1.320.000 1.200 690 560 390 250-420 365 20 510 1.360 1.104 77,5 7,74

460 780.000 1.560.000 1.100 730 600 430 275-460 400 20 560 1.715 1.380 114 9,01

500 1.000.000 2.000.000 1.050 780 650 440 300-500 410 25 570 1.958 1.554 146 10,67
(1) The torque of the coupling does not include the connection (4) Clearence to align coupling hubs and replacement of sealing rings.
550 1.200.000 2.400.000 950 850 710 460 325-550 430 25 600 2.464 1.942 218 11,03
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
590 1.600.000 3.200.000 900 910 760 500 350-590 470 25 660 3.050 2.396 308 15,48
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only. 620 1.800.000 3.600.000 850 970 810 530 375-620 500 30 700 3.720 2.969 430 15,72

(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions. 650 1.900.000 3.800.000 800 1.020 840 550 400-650 520 30 730 4.160 3.318 532 18,30
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
680 2.100.000 4.200.000 750 1.080 890 574 425-680 540 30 755 4.720 3.782 668 24,77

730 2.600.000 5.200.000 700 1.150 950 604 450-730 570 30 800 5.730 4.569 922 27,66

800 3.800.000 7.600.000 660 1.270 1.050 634 475-800 600 30 850 7.520 5.987 1.455 35,76

From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection For A00 rough bore dimensions contact Jaure. (5) Weight and moment of inertia are given for minimum bore.
transmission capacity. (3) Max. allowable bore for couplings with DIN 6885/1 keys. (6) Weight is given for maximum bore.
(2) Minimun dimensions refer to already machined bore. For other types of keys or connections please contact JAURE. (7) The amount of grease indicated in the catalogue is for guidance only.
(4) Clearance to align coupling hubs and replacement of sealing rings. For exact amount please refer to coupling instructions.
Technical modifications reserved Technical modifications reserved (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

18 ® ®
19
 MTG/MTG-HD MTV
Basic Design Industrial Vertical Installation Industrial

øD
S
øD2

ød1

l1
a Top Chamber
l1 l2 Bottom Chamber

a
G
øD2
øD

ød2
ød1

øD1

l2

S
ød2

øD1

Designation example: MTG-370 Designation example: MTV-52

MTG MTG-HD GREASE GREASE

WEIGHT WEIGHT MOMENT OF GREASE TN TP n MAX WEIGHT WEIGHT MOMENT QTY. QTY.
SIZE TN TP MAX TN TP MAX n MAX GENERAL DIMENSIONS MAX. (5) MIN. (6) INERTIA (5) QTY. SIZE NOMINAL MAX (8) GENERAL DIMENSIONS Max. Min. (6) OF INERTIA TOP BOTTOM
NOMINAL (1) NOMINAL (1) (8) (7) (1) (1) (5) (5)
CHAMBER CHAMBER
(1) (1)
(7) (7)

MTG d1-d2 2 d1-d2 2

MTG-HD Nm Nm Nm Nm rpm D D1 D2 (min-max) l1-l2 a S(4) kg kg J (kgm ) kg MTV Nm Nm rpm D D1 D2 (Min-Max) l1- l2 a G S(4) kg kg J (kgm ) kg kg
(2)(3) (2)(3)

280 220.000 440.000 363.000 726.000 1.800 540 465 370 140-280 250 16 300 527 346 14,95 4 52 1.780 3.600 8.600 111 82,5 69 14-52 43 6 3 57 4 3 0,005 0,018 0,017

310 250.000 500.000 412.500 825.000 1.600 585 505 410 160-310 270 16 320 676 442 22,93 5,05 62 2.790 5.520 7.000 141 104,5 85 17-62 50 6 3 64 8 6 0,017 0,038 0,032

345 320.000 640.000 528.000 1.056.000 1.500 650 548 450 180-345 290 16 340 884 574 36,84 5,87 78 5.600 11.100 5.800 171 127,5 107 20-78 62 6 3 76 15 11 0,042 0,056 0,046

370 400.000 800.000 660.000 1.320.000 1.400 690 588 490 210-370 325 20 370 1.105 733 53,16 7,16 98 8.500 17.400 4.700 210 156 133 26-98 76 8 3 92 27 18 0,11 0,100 0,068

390 510.000 1.020.000 841.500 1.683.000 1.300 760 640 520 230-390 345 20 400 1.379 957 79,63 10,70 112 14.000 28.200 4.200 234 181,5 152 30-112 90 8 3 108 40 27 0,21 0,184 0,142

420 660.000 1.320.000 1.089.000 2.178.000 1.200 805 690 560 250-420 365 20 420 1.667 1.154 110 12 132 23.000 45.600 3.600 274 210,5 178 35-132 105 11 5 125 61 44 0,47 0,279 0,210

460 780.000 1.560.000 1.287.000 2.574.000 1.100 850 730 600 275-460 400 20 450 2.043 1.372 153 13,80 156 35.100 69.600 3.200 312 248,5 209 70-156 120 11 5 140 94 64 0,92 0,392 0,298

500 1.000.000 2.000.000 1.650.000 3.300.000 1.050 930 780 650 300-500 410 25 490 2.452 1.643 217 16,81 174 44.400 88.000 2.900 337 274 234 85-174 135 13 5 162 119 81 1,38 0,669 0,511

550 1.200.000 2.400.000 1.980.000 3.960.000 950 995 850 710 325-550 430 25 520 3.035 1.991 313 18,62 190 68.500 139.600 2.600 380 308,5 254 95-190 150 13 5 180 170 120 2,56 1,052 0,865

590 1.600.000 3.200.000 2.640.000 5.280.000 900 1.055 910 760 350-590 470 25 550 3.720 2.413 434 28,29 210 84.600 167.600 2.400 405 334 279 110-210 175 14 6 205 217 148 3,71 1,465 1,240

620 1.800.000 3.600.000 2.970.000 5.940.000 850 1.140 970 810 375-620 500 30 600 4.648 3.145 633 25,19 233 151.000 304.000 2.200 444 365,5 305 120-233 190 14 6 218 267 174 5,17 1,996 1,727

650 1.900.000 3.800.000 3.135.000 6.270.000 800 1.190 1.020 840 400-650 520 30 630 5.152 3.469 765 33,47 275 205.500 407.000 2.000 506 424 355 130-275 220 16 6 252 420 261 10,67 3,097 2,641

680 2.100.000 4.200.000 3.465.000 6.930.000 750 1.250 1.080 890 425-680 540 30 650 5.954 4.077 990 50,61
From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
730 2.600.000 5.200.000 4.290.000 8.580.000 700 1.300 1.150 950 450-730 570 30 680 6.956 4.634 1.277 54,26
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
800 3.800.000 7.600.000 6.270.000 12.540.000 660 1.420 1.270 1.050 475-800 600 30 725 9.036 5.971 1.980 72,95

900 5.420.000 10.840.000 8.943.000 17.886.000 590 1.600 1.430 1.180 500-900 670 35 800 13.330 8.670 3.663 91,90

1.000 7.250.000 14.500.000 11.962.500 23.925.000 550 1.740 1.570 1.320 525-1000 740 35 890 17.975 11.130 5.766 112,98
(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
1.100 8.650.000 17.300.000 14.272.500 28.545.000 500 1.880 1.710 1.450 550-1100 800 35 980 23.150 13.930 8.683 135
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
1.200 10.750.000 21.500.000 17.737.500 35.475.000 480 1.990 1.830 1.580 575-1200 850 35 1.030 28.605 16.680 12.239 162,50 (2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
The coupling is supplied by default with puller holes. Setscrews can be included upon request. ATEX certifications are available. Please, (3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
For other types of keys or connections please consult JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

Technical modifications reserved Technical modifications reserved

20 ® ®
21
 MTX/MTX-HD MTGX/MTGX-HD
With Spacer Industrial With Spacer Industrial

S S
S MTX-Y

l1 DBSE l2 Reversed Hub

ød2

øD1
l1 l2
ød1
øD2

DBSE
øD

Ød1

Ød2
ØD2
ØD

ØD1
MTX-YY

Reversed Hub Reversed Hub

Designation example: MTX-132 / DBSE = 1000(mm) / n=1500rpm Designation example: MTGX-370 / DBSE= 1000 (mm) / n= 750rpm
MTX-Y-132 / DBSE = 1000(mm) / n=1500rpm
MTX-YY-132 / DBSE = 1000(mm) / n=1500rpm
Where "n" is the maximun speed

MTX MTX-HD MTGX MTGX-HD

n WEIGHT WEIGHT WEIGHT MOMENT MOMENT OF GREASE n WEIGHT WEIGHT WEIGHT MOMENT MOMENT GREASE
SIZE TN TP TN TP MAX GENERAL DIMENSIONS MAX. PER MIN. (6) OF INERTIA PER QTY. SIZE TN TP MAX TN TP MAX MAX GENERAL DIMENSIONS MAX. (5) PER MIN. (6) OF INERTIA OF INERTIA QTY.
NOMINAL MAX NOMINAL MAX (8) (5) 100MM INERTIA 100MM (7) NOMINAL (1) NOMINAL (1) (8) 100MM (7) PER 100MM
SPACER (5) SPACER SPACER SPACER (7)
(1) (1) (1) (1) (1) (1)

MTX d1-d2 MTGX Nm Nm Nm Nm rpm d1-d2 2 2

2 2 MTGX-HD D D1 D2 (min-max) l1-l2 S(4) kg kg kg J (kgm ) J (kgm ) kg
MTX- Nm Nm Nm Nm rpm D D1 D2 (Min-Max) l1-l2 S(4) kg kg kg J (kgm ) J (kgm ) kg
HD (2)(3) (2)(3)

52 1.780 3.600 2.937 5.940 111 82,5 69 14-52 43 57 14 0,8 13 0,017 0,0009 0,03 280 220.000 440.000 363.000 726.000 540 443 370 140-280 250 300 765 25,0 584 23 0,72 1,73
For max. allowable speed check fig. nº 7 at page 14

62 2.790 5.520 4.604 9.108 141 104,5 85 17-62 50 64 23 1,0 21 0,047 0,0019 0,06 310 250.000 500.000 412.500 825.000 585 488 410 160-310 270 320 935 27,8 700 33 0,99 2,19

78 5.600 11.100 9.240 18.315 171 127,5 107 20-78 62 76 36 1,5 31 0,099 0,0033 0,09 345 320.000 640.000 528.000 1.056.000 650 531 450 180-345 290 340 1.178 31,6 868 53 1,45 2,52

98 8.500 17.400 14.025 28.710 210 156 133 26-98 76 92 60 2,4 52 0,27 0,0096 0,14 370 400.000 800.000 660.000 1.320.000 690 571 490 210-370 325 370 1.450 36,4 1.078 71 1,64 3,03

112 14.000 28.200 23.100 46.530 234 181,5 152 30-112 90 108 80 2,7 67 0,45 0,015 0,29 390 510.000 1.020.000 841.500 1.683.000 760 627 520 230-390 345 400 1.816 46,2 1.394 108 2,55 3,64

For max. allowable speed contact JAURE.

132 23.000 45.600 37.950 75.240 274 210,5 178 35-132 105 125 113 3,9 106 0,96 0,025 0,42 420 660.000 1.320.000 1.089.000 2.178.000 805 673 560 250-420 365 420 2.072 46,4 1.559 142 3,19 4,52

156 35.100 69.600 57.915 114.840 312 248,5 209 70-156 120 140 169 4,7 139 1,72 0,042 0,6 460 780.000 1.560.000 1.287.000 2.574.000 850 717 600 275-460 400 450 2.486 56,2 1.815 193 4,59 4,83

174 44.400 88.000 73.260 145.200 337 274 234 85-174 135 162 216 6,6 177 2,62 0,074 1,04 500 1.000.000 2.000.000 1.650.000 3.300.000 930 769 650 300-500 410 490 2.997 61,2 2.188 279 5,90 7,05

190 68.500 139.600 113.025 230.340 380 308,5 254 95-190 150 180 324 10,1 274 5,26 0,17 1,73 550 1.200.000 2.400.000 1.980.000 3.960.000 995 834 710 325-550 430 520 3.563 65,0 2.519 389 8,04 7,38

210 84.600 167.600 139.590 276.540 405 334 279 110-210 175 205 359 8,0 290 6,48 0,14 2,48 590 1.600.000 3.200.000 2.640.000 5.280.000 1.055 894 760 350-590 470 550 4.370 81,6 3.062 533 11,06 9,58

233 151.000 304.000 249.150 501.600 444 365,5 305 120-233 190 218 433 12,2 340 9,32 0,29 3,46 620 1.800.000 3.600.000 2.970.000 5.940.000 1.140 944 810 375-620 500 600 5.475 92,5 3.972 781 13,06 11,95

275 205.500 407.000 339.075 671.550 506 424 355 130-275 220 252 659 17,2 500 18,38 0,52 5,31 650 1.900.000 3.800.000 3.135.000 6.270.000 1.190 984 840 400-650 520 630 5.940 89,3 4.257 929 14,52 14,30

680 2.100.000 4.200.000 3.465.000 6.930.000 1.250 1.059 890 425-680 540 650 6.810 94,9 4.934 1.188 17,39 20,26

From size 174 (included) the coupling is supplied by default with Setscrews can be included upon request. ATEX certifications are available. Please, 730 2.600.000 5.200.000 4.290.000 8.580.000 1.300 1.109 950 450-730 570 680 7.758 106 5.436 1.493 24,22 21,56
puller holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
Distance to be specified by the customer. DBSE is distance between 800 3.800.000 7.600.000 6.270.000 12.540.000 1.420 1.224 1.050 475-800 600 725 9.990 141,7 6.924 2.270 38,80 26,62
shafts ends, not between flanges.
900 5.420.000 10.840.000 8.943.000 17.886.000 1.600 1.384 1.180 500-900 670 800 14.308 176,1 9.682 4.084 62,50 35,18

1.000 7.250.000 14.500.000 11.962.500 23.925.000 1.740 1.524 1.320 525-1000 740 890 18.746 198,3 12.136 6.265 89,19 43,69

1.100 8.650.000 17.300.000 14.272.500 28.545.000 1.880 1.664 1.450 550-1100 800 980 23.940 230 14.988 9.238 118,66 55,48

(1) The torque of the coupling does not include the connection For other types of keys or connections please contact JAURE. (7) The amount of grease indicated in the catalogue is for guidance only. 1.200 10.750.000 21.500.000 17.737.500 35.475.000 1.990 1.784 1.580 575-1200 850 1.030 29.217 254,1 17.590 12.806 159,84 54,62

transmission capacity. (4) Clearance to align coupling hubs and replacement of sealing rings For exact amount please refer to coupling instructions.
(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for minimum bore and 1m DBSE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure. The coupling is supplied by default with puller holes. If required, puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
For A00 rough bore dimensions contact Jaure. (6) Weight is given for maximum bore and 1m DBSE.
Distance to be specified by the customer. DBSE is distance between shafts
(3) Max. allowable bore for couplings with DIN 6885/1 keys. ends, not between flanges.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore and 1m DBSE.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore and 1m DBSE.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

Technical modifications reserved Technical modifications reserved

22 ® ®
23
 MTD/MTD-HD MTGD / MTGD-HD
With Floating Shaft Industrial With Intermediate Floating Shaft Industrial

Complete MTD coupling

Complete MTGD coupling

a
Ød1

Ød3

l1 l
a

Ød2
Ød1
ØD1
ØD3

ØD2
ØD

l1 l

Ød2
Ød1
ØD1
Ød1
ØD3

ØD2
Ød3
ØD
l1 DBSE (4) l2

Half MTD coupling

Half MTGD coupling l1 DBSE (4) l2

Designation example: MTD-132 / DBSE=1200 (mm) / n = 1500 rpm Designation example: MTGD-370 / DBSE=1200 (mm) / n = 750 rpm

MTD MTD-HD MTGD MTGD-HD MOMENT

WEIGHT WEIGHT WEIGHT MOMENT MOMENT OF GREASE n WEIGHT WEIGHT WEIGHT MOMENT OF INERTIA GREASE
SIZE TN TP TN TP n MAX GENERAL DIMENSIONS MAX. PER MIN. (6) OF INERTIA PER QTY. SIZE TN TP TN TP MAX GENERAL DIMENSIONS MAX. PER MIN. (6) OF PER QTY.
NOMINAL MAX NOMINAL MAX (8) (5) 100MM INERTIA 100MM (7) NOMINAL MAX NOMINAL MAX (8) (5) 100MM INERTIA 100MM (7)
(1) (1) (1) (1) SHAFT (5) SHAFT (1) (1) (1) (1) SHAFT (5) SHAFT
2 2
MTGD Nm Nm Nm Nm rpm D D1 D2 D3 d1-d2 d3 l-l1-l2 a kg kg kg J (kgm ) J (kgm ) kg
MTD d3 d1-d2 2 2 MTGD- (Min- (Min-Max)
MTD-HD Nm Nm Nm Nm rpm D D1 D2 D3 (Min-Max) (Min-Max) l-l1-l2 a kg kg kg J (kgm ) J (kgm ) kg HD Max(2)(3) (2)(3)
(2)(3) (2)(3)
280 220.000 440.000 363.000 726.000 540 465 370 410 140-290 140-280 250 16 1.980 55,5 1.781 33 0,624 1,73
52 1.780 3.600 2.937 5.940 111 82,5 69 80 14-52 14-55 43 3 27 2,0 25 0,018 0,001 0,03
For max. allowable speed check fig. nº 8 at page 14

62 2.790 5.520 4.604 9.108 141 104,5 85 100 17-62 17-70 50 3 42 2,8 40 0,048 0,002 0,06 310 250.000 500.000 412.500 825.000 585 505 410 460 160-350 160-310 270 16 2.470 67,1 2.147 51 0,914 2,19

78 5.600 11.100 9.240 18.315 171 127,5 107 125 20-78 20-90 62 3 68 4,4 63 0,117 0,004 0,09 345 320.000 640.000 528.000 1.056.000 650 548 450 500 180-380 180-345 290 16 3.072 82,1 2.671 79 1,368 2,52

98 8.500 17.400 14.025 28.710 210 156 133 148 26-98 26-105 76 5 111 6,8 103 0,30 0,01 0,14 370 400.000 800.000 660.000 1.320.000 690 588 490 540 210-410 210-370 325 20 3.632 93,8 3.135 109 1,78 3,03

For max. allowable speed contact Jaure

112 14.000 28.200 23.100 46.530 234 181,5 152 173 30-112 30-120 90 5 150 8,6 137 0,54 0,01 0,29 390 510.000 1.020.000 841.500 1.683.000 760 640 520 590 230-450 230-390 345 20 4.258 103,6 3.621 155 2,18 3,64

132 23.000 45.600 37.950 75.240 274 210,5 178 204 35-132 35-145 105 6 227 12,3 206 1,18 0,03 0,42 420 660.000 1.320.000 1.089.000 2.178.000 805 690 560 630 250-480 250-420 365 20 5.021 122,1 4.266 210 3,02 4,52

156 35.100 69.600 57.915 114.840 312 248,5 209 242 70-156 70-170 120 6 321 17,0 292 2,28 0,06 0,60 460 780.000 1.560.000 1.287.000 2.574.000 850 730 600 680 275-520 275-460 400 20 6.056 145,0 5.096 296 4,26 4,83

174 44.400 88.000 73.260 145.200 337 274 234 268 85-174 85-190 135 8 404 21,1 366 3,47 0,09 1,04 500 1.000.000 2.000.000 1.650.000 3.300.000 930 780 650 730 300-560 300-500 410 25 7.161 169,9 6.031 418 5,85 7,05

190 68.500 139.600 113.025 230.340 380 308,5 254 302 95-190 95-215 150 8 535 24,9 485 6,13 0,13 1,73 550 1.200.000 2.400.000 1.980.000 3.960.000 995 850 710 790 325-600 325-550 430 25 8.646 203,8 7.297 592 8,42 7,38

210 84.600 167.600 139.590 276.540 405 334 279 327 110-210 110-230 175 8 669 30,4 600 9,01 0,19 2,48 590 1.600.000 3.200.000 2.640.000 5.280.000 1.055 910 760 850 350-650 350-590 470 25 10.316 237,0 8.577 822 11,39 9,58

233 151.000 304.000 249.150 501.600 444 365,5 305 354 120-233 120-250 190 8 820 37,3 727 12,18 0,28 3,46 620 1.800.000 3.600.000 2.970.000 5.940.000 1.140 970 810 890 375-680 375-620 500 30 11.848 260,5 9.864 1.096 13,76 11,95

275 205.500 407.000 339.075 671.550 506 424 355 410 130-275 130-290 220 10 1.199 51,1 1.039 25,66 0,53 5,31 650 1.900.000 3.800.000 3.135.000 6.270.000 1.190 1.020 840 930 400-710 400-650 520 30 13.094 285,1 10.887 1.331 16,48 14,30

680 2.100.000 4.200.000 3.465.000 6.930.000 1.250 1.080 890 1.010 425-770 425-680 540 30 15.177 319,6 12.432 1.777 20,71 20,26

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please, 730 2.600.000 5.200.000 4.290.000 8.580.000 1.300 1.150 950 1.060 450-810 450-730 570 30 17.501 375,1 14.313 2.276 28,53 21,56
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
800 3.800.000 7.600.000 6.270.000 12.540.000 1.420 1.270 1.050 1.170 475-900 475-800 600 30 21.610 435,0 17.286 3.410 38,37 26,62

900 5.420.000 10.840.000 8.943.000 17.886.000 1.600 1.430 1.180 1.330 500-900 500-900 670 35 29.654 556,4 23.292 6.125 62,77 35,18

1.000 7.250.000 14.500.000 11.962.500 23.925.000 1.740 1.570 1.320 1.470 525-1000 525-1000 740 35 29.506 692,7 20.575 7.999 97,30 43,69
(1) The torque of the coupling does not include the connection (4) Distance to be specified by the customer. DBSE is distance (7) The amount of grease indicated in the catalogue is for guidance only. 1.100 8.650.000 17.300.000 14.272.500 28.545.000 1.880 1.710 1.450 1.610 550-1100 550-1100 800 35 36.272 829,6 24.332 10.894 140 55,48
transmission capacity. between shafts ends, not between flanges. For exact amount please refer to coupling instructions.
1.200 10.750.000 21.500.000 17.737.500 35.475.000 1.990 1.830 1.580 1.730 575-1200 575-1200 850 35 43.404 978,8 28.607 16.590 194 54,62
(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For A00 rough bore dimensions contact Jaure. minimum bore and 1m DBSE for full MTD coupling.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (6) Weight is given for maximum bore and 1m DBSE for full coupling. The coupling is supplied by default with puller holes. If required, puller Setscrews can be included upon request. ATEX certifications are available. Please,
For other types of keys or connections please contact JAURE. holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection (4) Distance to be specified by the customer. (7) The amount of grease indicated in the catalogue is for guidance only.
transmission capacity. DBSE is distance between shafts ends, not between flanges. For exact amount please refer to coupling instructions.
(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for minimum bore and (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For A00 rough bore dimensions contact Jaure. 2.5 m DBSE for full MTGD coupling.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (6) Weight is given for maximum bore and 2.5 m DBSE for full MTGD coupling.
For other types of keys or connections please consult JAURE.

Technical modifications reserved Technical modifications reserved

24 ® ®
25
 MTFF MTFS
With Intermediate Brake Disc and axially limited Industrial With Side Brake Disc Industrial

X MTFFY
12,7

b=30
S
X S
Basic Design
E

E
A
l1 a l2
Ød1

Ød2
ØD1
ØD2
ØD

a1
ØDF

øD3
øDF

øD1

øD2
øD4
ød1

ød2

øD5
a
l1 l3 l2

Designation example: MTFF-132 / DF = 625 (mm) / b = 12.7 (mm) / n = 1800 (rpm) Designation example: MTFS-132 / D = 625 (mm) / b = 30 (mm) / n = 1200 (rpm)
Where "n" is the maximun speed Where "n" is the maximun speed

TN TP WEIGHT WEIGHT MOMENT GREASE TN TP BOLTS WEIGHT WEIGHT MOMENT GREASE

SIZE NOMINAL MAX n MAX GENERAL DIMENSIONS Max. Min. OF QTY. SIZE NOMINAL MAX n MAX GENERAL DIMENSIONS DATA MAX. MIN. OF QTY.
(1) (1) (8)(9) (5) (6) INERTIA (7) (1) (1) (8)(10) pos A (5) (6) INERTIA (7)
(5) (5)

d1-d2 2 D3 d1(Max) d2 l3 2
MTFF Nm Nm rpm D D1 D2 DF X E (Min-Max) l1-l2 a a1 S(3) kg kg J (kgm ) kg MTFS Nm Nm rpm DF D1 D2 (H7/f8) D4 D5 (3) (Min-Max) l1 l2 (9) S(4) X Z-M Nm kg kg J (kgm ) kg
(2)(3) (2)(3)

62 2.790 5.520 3.500 315 124 105 85 82 141 50 17-62 107 50 117 64 102 9-M10 49 34 31 0,253 0,06
52 1.800 3.600 4.200 111 82,5 69 215 52 0,5 14-52 43 17 19 57 9 8 0,043 0,043 3.100 355 145 125 105 100 60 107 117 102 9-M12 86 42 38 0,402
3.500 315 11 10 0,101 2.800 395 165 140 115 110 70 107 117 102 9-M14 135 50 46 0,612
2.500 445 175 146 120 112 70 140 117 135 12-M16 210 63 58 0,972
62 2.760 5.520 3.500 141 104,5 85 315 59 0,5 17-62 50 17 22 64 15 13 0,112 0,086
3.100 355 17 15 0,171 78 5.600 11.100 2.800 395 165 140 115 110 171 70 20-78 107 62 117 76 102 9-M14 135 57 51 0,634 0,09
2.800 395 20 18 0,254 2.500 445 175 146 120 112 70 140 130 135 12-M16 210 70 64 0,996
2.200 495 218 190 160 155 100 140 145 135 12-M18 290 92 82 1,565
78 5.550 11.100 2.800 171 127,5 107 395 71 0,5 20-78 62 17 28 76 25 21 0,277 0,122 2.000 550 218 190 160 155 100 140 145 135 12-M18 290 104 93 2,3
2.500 445 29 25 0,422
2.200 495 32 28 0,626 98 8.500 17.400 2.500 445 175 146 120 112 210 70 26-98 140 76 145 92 135 12-M16 210 82 74 1,063 0,14
2.000 550 37 33 0,934 2.200 495 218 190 160 155 100 140 164 135 12-M18 290 106 93 1,640
2.000 550 218 190 160 155 100 140 164 135 12-M18 290 117 104 2,367
98 8.700 17.400 2.500 210 156 133 445 87 0,5 26-98 76 20 27 92 40 32 0,492 0,174 1.800 625 238 205 170 168 105 140 164 135 12-M20 410 140 126 3,85
2.200 495 44 36 0,695
2.000 550 49 41 1,00 112 14.000 28.200 2.200 495 218 190 160 155 234 100 30-112 140 90 180 108 135 12-M18 290 120 106 1,73 0,29
1.800 625 55 47 1,60 2.000 550 218 190 160 155 100 140 180 135 12-M18 290 131 117 2,46
1.800 625 238 205 170 168 105 140 180 135 12-M20 410 154 139 3,94
112 14.100 28.200 2.200 234 181,5 152 495 101 0,5 30-112 90 20 39 108 57 44 0,78 0,344 1.600 705 268 230 195 190 120 140 180 135 12-M22 550 185 167 6,27
2.000 550 61 48 1,09
1.800 625 68 55 1,69
1.600 705 76 63 2,61 132 23.000 45.600 1.800 625 238 205 170 168 274 105 35-132 140 105 196 125 135 12-M20 410 178 160 4,18 0,42
1.600 705 268 230 195 190 120 140 196 135 12-M22 550 195 189 6,51
1.400 795 300 260 220 216 135 140 196 135 12-M24 710 250 225 10,27
132 22.800 45.600 1.800 274 210,5 178 625 116 1 35-132 105 21 42 125 86 70 1,94 0,497
1.600 705 95 79 2,86
1.400 795 105 89 4,35 156 35.100 69.600 1.800 625 238 205 170 168 312 105 70-156 140 120 223 140 135 12-M20 410 216 192 4,60 0,60
1.600 705 268 230 195 190 120 140 223 135 12-M22 550 248 221 6,93
1.400 795 300 260 220 216 135 140 223 135 12-M24 710 287 257 10,69
156 34.800 69.600 1.800 312 248,5 209 625 131 1 70-156 120 21 47 140 119 89 2,36 0,696
1.600 705 127 97 3,28
1.400 795 138 108 4,78 174 44.400 88.000 1.600 705 268 230 195 190 337 120 85-174 140 135 238 162 135 12-M22 550 281 250 7,39 1,04
1.400 795 300 260 220 216 135 140 238 135 12-M24 710 320 286 11,15
174 44.000 88.000 1.800 337 274 234 625 149 1 85-174 135 24 53 162 142 104 2,80 1,17
1.600 705 150 112 3,73
1.400 795 161 123 5,22
From size 174 (included) the coupling is supplied by default with puller Anti-fall system versión can be supplied on demand. ATEX certifications are available. Please,
190 69.800 139.600 1.800 380 308,5 254 625 163 1 95-190 150 24 66 180 192 142 3,95 1,92 holes. If required, puller holes can also be made for smaller sizes. Setscrews can be included upon request. contact JAURE to define the zone and category.
1.300 705 200 150 4,87 Modified brake disc dimensions on reguest. Adapted hub length available upon request.
1.200 795 211 161 6,36

210 83.800 167.600 1.600 405 334 279 705 188 1 110-210 175 24 68 205 245 176 5,97 2,70
1.400 795 256 187 7,46

233 152.000 304.000 1.400 444 365,5 305 795 203 1 120-233 190 24 74 218 304 211 8,85 3,74
(1) When calculating the nominal torque of the coupling neither the (4) Clearance to align coupling hubs and replacement of sealing rings. (9) l3 can be supplied with different length on demand.
connection nor the braking system are considered. (5) Weight and moment of inertia are given for minimum bore. For exact amount please refer to coupling instructions.

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. For more details, please, contact JAURE. (6) Weight is given for maximum bore. (10) n MAX speed for balanced couplings. For higher speeds contact Jaure.
ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category. (2) Minimun dimensions refer to already machined bore. (7) The amount of grease indicated in the catalogue is for guidance only.
Modified brake disc dimensions on request.
For A00 rough bore dimensions contact Jaure. (8) Maximun speed calculated according to standard brake material (S 355).
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For higher speed, please contact JAURE.
For other types of keys or connections please contact JAURE.
(1) When calculating the nominal torque of the coupling (3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
neither the connection nor the braking system are considered. For other types of keys or connections please contact JAURE. (8) Maximun speed calculated according to standard brake material (S 355).
For more details, please, contact JAURE. (4) Clearance to align coupling hubs and replacement of sealing rings. For higher speed, please contact JAURE.
(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for minimum bore. (9) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For A00 rough bore dimensions contact Jaure. (6) Weight is given for maximum bore.
(7) The amount of grease indicated in the catalogue is for guidance only.

Technical modifications reserved Technical modifications reserved

26 ® ®
27
 MTF MTFE
With Intermediate Brake Drum Industrial With Side Brake Drum Industrial

B
B

S
S

a
l1 a l2
l1 l2

ød1
øDF

ød2

øD1
øD2
øDF

ød2

øD1
øD2

ød1

øD
øD

Designation example: MTF-132 / DF = 450 (mm) / n = 1200 (rpm) Designation example: MTFE-132 / DF = 450 (mm) n = 1200 (rpm)
Where "n" is the maximun speed Where "n" is the maximun speed.

TN TP n MAX WEIGHT WEIGHT MOMENT OF GREASE TN TP n MAX WEIGHT WEIGHT MOMENT GREASE
SIZE NOMINAL MAX (8)(9) GENERAL DIMENSIONS MAX. (5) MIN. (6) INERTIA (5) QTY. (7) SIZE NOMINAL MAX (8)(10) GENERAL DIMENSIONS MAX. MIN. OF INERTIA QTY. (7)
(1) (1) (1) (1) (5) (6) (5)

d1-d2 2 d1-d2 2
MTF Nm Nm rpm D D1 D2 DF B (Min-Max) l1-l2 a S(4) kg kg J (kgm ) kg MTFE Nm Nm rpm D D1 D2 DF B (Min-Max) l1 (9) l2 a S(4) kg kg J (kgm ) kg
(2)(3) (2)(3)
52 1.780 3.600 2.850 111 82,5 69 200 75 14-52 43 13 57 9 8 0,045 0,04 52 1.780 3.600 2.850 111 82,5 69 200 75 14-52 105 43 3 57 11 8 0,040 0,03

62 2.790 5.520 2.850 141 104,5 85 200 75 17-62 50 13 64 13 11 0,056 0,08 62 2.790 5.520 2.850 141 104,5 85 200 75 17-62 115 50 3 64 17 13 0,060 0,06
2.300 250 95 13 17 14 0,119 0,08 2.300 250 95 125 3 21 18 0,126
1.800 315 118 15 24 22 0,326 0,08 1.800 315 118 140 3 28 24 0,296

78 5.600 11.100 2.300 171 127,5 107 250 95 20-78 62 13 76 23 19 0,144 0,12 78 5.600 11.100 2.300 171 127,5 107 250 95 20-78 130 62 3 76 30 24 0,166 0,09
1.800 315 118 15 31 26 0,351 0,12 1.800 315 118 145 3 39 32 0,359
1.650 350 130 15 35 30 0,519 0,12 1.650 350 130 145 3 45 37 0,550
1.450 400 150 19 50 45 1,112 0,13 1.450 400 150 160 3 59 51 1,060

98 8.500 17.400 1.800 210 156 133 315 118 26-98 76 17 92 42 33 0,411 0,17 98 8.500 17.400 1.800 210 156 133 315 118 26-98 155 76 5 92 55 42 0,460 0,14
1.650 350 130 19 47 39 0,604 0,18 1.650 350 130 155 5 61 49 0,670
1.450 400 150 19 60 51 1,152 0,18 1.450 400 150 170 5 76 63 1,190

112 14.000 28.200 1.800 234 181,5 152 315 118 30-112 90 17 108 54 41 0,50 0,34 112 14.000 28.200 1.800 234 181,5 152 315 118 30-112 155 90 5 108 66 48 0,54 0,29
1.650 350 130 19 60 47 0,70 0,35 1.650 350 130 155 5 71 54 0,74
1.450 400 150 19 72 59 1,24 0,35 1.450 400 150 170 5 88 69 1,28
1.300 450 170 19 79 66 1,77 0,35 1.300 450 170 180 5 107 88 2,12

132 23.000 45.600 1.450 274 210,5 178 400 150 35-132 105 20 125 90 73 1,48 0,51 132 23.000 45.600 1.450 274 210,5 178 400 150 35-132 200 105 6 125 119 88 1,59 0,42
1.300 450 170 20 97 80 2,01 0,51 1.300 450 170 210 6 137 105 2,42
1.150 500 190 20 107 90 2,88 0,51 1.150 500 190 220 6 158 126 3,76

156 35.100 69.600 1.150 312 248,5 209 500 190 70-156 120 21 140 142 112 3,37 0,71 156 35.100 69.600 1.150 312 248,5 209 500 190 70-156 220 120 6 140 181 144 4,16 0,60
1.100 530 195 21 150 120 4,10 0,71 1.100 530 195 220 6 192 151 4,90
1.000 630 236 24 192 163 8,68 0,73 1.000 630 236 250 6 239 195 9,16

174 44.400 88.000 1.150 337 274 234 500 190 85-174 135 23 162 168 130 3,85 1,18 174 44.400 88.000 1.150 337 274 234 500 190 85-174 235 135 8 162 225 172 4,96 1,04
1.100 530 195 23 176 138 4,58 1,18 1.100 530 195 235 8 231 179 5,69
1.000 630 236 26 218 180 9,16 1,21 1.000 630 236 265 8 273 216 9,85
800 710 265 26 247 208 14,07 1,21 800 710 265 280 8 304 245 14,66

From size 174 (included) the coupling is supplied by default with puller Adapted hub length available upon request. ATEX certifications are available. Please, From size 174 (included) the coupling is supplied by default with puller Adapted hub length available upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. contact JAURE to define the zone and category. holes. If required, puller holes can also be made for smaller sizes. contact JAURE to define the zone and category.
Anti-fall system versión can be supplied on demand. Anti-fall system versión can be supplied on demand.
Setscrews can be included upon request. Setscrews can be included upon request.

(1) When calculating the nominal torque of the coupling neither the (3) Max. allowable bore for couplings with DIN 6885/1 keys. (7) The amount of grease indicated in the catalogue is for guidance only. (1) When calculating the nominal torque of the coupling neither the (4) Clearance to align coupling hubs and replacement of sealing rings. materials, please, contact JAURE.

connection nor the braking system are considered. For other types of keys or connections please contact JAURE. For exact amount please refer to coupling instructions. connection nor the braking system are considered. (5) Weight and moment of inertia are given for minimum bore. (9) l1 can be supplied with different length on demand.

For more details, please, contact JAURE. (4) Clearance to align coupling hubs and replacement of sealing rings. (8) Maximun speed calculated according to standard brake material For more details, please, contact JAURE. (6) Weight is given for maximum bore. (10) n MAX speed for balanced couplings. For higher speeds contact Jaure.

(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for minimum bore. (EN-GJL-250) For higher speed, please contact JAURE. (2) Minimun dimensions refer to already machined bore. (7) The amount of grease indicated in the catalogue is for guidance only.

For A00 rough bore dimensions contact Jaure. (6) Weight is given for maximum bore. (9) n MAX speed for balanced couplings. For higher speeds contact Jaure. For A00 rough bore dimensions contact Jaure. For exact amount please refer to coupling instructions.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (8) When calculating the maximum allowed speed, we just consider
For other types of keys or connections please contact JAURE. the type of material of the brake drums EN-GJL-250. For other speed or

Technical modifications reserved Technical modifications reserved

28 ® ®
29
 MTCO MTES
With Axial Stroke Industrial Disengaging Industrial

S R C

MTCO

a
a
l1 l2
l1 l2

ød1
a1

øD1

ød2
ød2

øD1

øD

A
øD2

ød1
øD

Motor side Machine side

h
Manual Lever
Stroke = a1 - a
øP

Designation example: MTCO-132 Designation example: MTES-125 / n = 150 (rpm)

Where “n” is the maximum speed

TN TP WEIGHT WEIGHT MOMENT GREASE SIZE TN TP MAX n MAX WEIGHT WEIGHT MOMENT OF GREASE
SIZE NOMINAL MAX n MAX GENERAL DIMENSIONS MAX. MIN. (6) OF INERTIA QTY. (7) NOMINAL (1) (8) GENERAL DIMENSIONS
(1) (1) (8) (5) (5) MAX. (5) MIN. (6) INERTIA (5) QTY. (7)
(1)
2
d1-d2 2 MTES Nm Nm rpm D D1 d1-d2 l1-l2 a A h P R C(4) kg kg J (kgm ) kg
MTCO Nm Nm rpm D D1 D2 (Min-Max) l1-l2 a a1 S(4) kg kg J (kgm ) kg
(2)(3) (Min-Max) (2)(3)

52 1.780 3.600 8.600 111 82,5 69 14-52 43 6 26 57 4 3 0,005 0,03 42 1.200 2.400 3.000 100 60 13-44 55 6 104 12 12 24 18 6 5 0,008 0,06
62 2.790 5.520 7.000 141 104,5 85 17-62 50 6 36 64 8 6 0,016 0,06
55 2.600 5.200 2.500 120 79 16-60 70 6 124 14 14 33 20 10 7 0,018 0,08
78 5.600 11.100 5.800 171 127,5 107 20-78 62 6 46 76 14 10 0,040 0,09
70 5.000 10.000 2.000 150 101 20-75 80 6 154 16 16 40 25 18 13 0,051 0,16
98 8.500 17.400 4.700 210 156 133 26-98 76 8 58 92 26 18 0,11 0,14
90 8.600 16.000 1.700 177 120 25-95 95 8 187 16 16 50 28 30 21 0,12 0,24
112 14.000 28.200 4.200 234 181,5 152 30-112 90 8 88 108 39 26 0,20 0,29
100 14.000 28.000 1.500 200 143 30-105 105 8 210 18 18 56 32 43 30 0,21 0,31
132 23.000 45.600 3.600 274 210,5 178 35-132 105 11 92 125 58 42 0,45 0,42
125 20.600 41.200 1.300 226 170 35-130 120 8 240 20 20 62 35 63 39 0,40 0,42
156 35.100 69.600 3.200 312 248,5 209 70-156 120 11 102 140 91 61 0,88 0,60
145 33.000 66.000 1.150 264 200 45-150 135 10 280 20 20 70 40 98 64 0,83 0,59
174 44.400 88.000 2.900 337 274 234 85-174 135 13 122 162 115 77 1,33 1,04
165 45.600 91.200 1.050 290 220 55-165 150 10 300 22 22 72 42 126 82 1,28 0,89
190 68.500 139.600 2.600 380 308,5 254 95-190 150 13 146 180 165 115 2,48 1,73
185 61.400 122.800 950 325 250 60-190 170 10 330 24 24 77 44 178 110 2,24 1,13
210 84.600 167.600 2.400 405 334 279 110-210 175 14 168 205 211 142 3,59 2,48
205 80.800 161.600 850 353 275 70-210 185 12 368 26 26 81 48 229 139 3,39 1,30
233 151.000 304.000 2.200 444 365,5 305 120-233 190 14 180 218 260 167 5,00 3,46
230 105.500 211.000 800 377 300 100-230 200 12 390 26 26 86 52 283 167 4,67 1,62
275 205.500 407.000 2.000 506 424 355 130-275 220 16 212 252 411 252 10,39 5,31
260 161.000 322.000 700 435 340 115-260 230 12 450 30 30 102 60 415 261 9,37 2,56

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category. From size 185 (included) the coupling is supplied by default with puller Pneumatic or hydraulic leveler can be integrated on demand. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Setscrews can be included upon request. contact JAURE to define the zone and category.
When engaging or disengaging the machine must be Adapted hub length available upon request.
stopped and the shaft must be able to rotate free.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(1) The torque of the coupling does not include the connection (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
transmission capacity. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(2) Minimun dimensions refer to already machined bore. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For A00 rough bore dimensions contact Jaure. For exact amount please refer to coupling instructions.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For other types of keys or connections please contact JAURE.
(4) Stroke of the sleeve.

Technical modifications reserved Technical modifications reserved

30 ® ®
31
 MTB MTNBR
With Shear Pins Industrial With Shear Pins Industrial

S
MTB S

øD4
ød1
øD1

ød2
øD2

øD3
øD.B.C.

øD
øD3
ød2
øD1

øD2
øD

ød1

l1 l2
a
l1 DBSE l2

Designation example: MTB-132 / Tbr = 15000 (Nm) Designation example: MTNBR-125 / DBSE = 195 / Tbr = 15000 (Nm)

Where Tbr is the designed breaking torque Where Tbr is the designed breaking torque

TN TP n MAX WEIGHT WEIGHT MOMENT GREASE TN TP n MAX WEIGHT WEIGHT MOMENT GREASE
SIZE NOMINAL MAX (8) GENERAL DIMENSIONS MAX. MIN. OF INERTIA QTY.(7) SIZE NOMINAL MAX (8) GENERAL DIMENSIONS MAX. MIN. (6) OF INERTIA QTY.(7)
(1) (1) (5) (6) (5) (1) (1) (5) (5)

d1-d2 2 d1-d2 2
MTB Nm Nm rpm D D1 D2 D3 D.B.C (Min-Max) l1-l2 a S(4) kg kg J (kgm ) kg MTNBR Nm Nm rpm D D1 D2 D3 D4 (Min-Max) l1-l2 DBSE S(4) kg kg J (kgm ) kg
(2)(3) (2)(3)

52 1.780 3.600 8.600 111 82,5 69 170 170 14-52 43 39 57 10 9 0,025 0,03 42 1.300 2.600 6.490 145 113 65 80 153 13-48 55 123±1 80 14 12 0,029 0,12

62 2.790 5.520 7.000 141 104,5 85 220 185 17-62 50 49 64 18 16 0,075 0,06 55 2.500 5.000 5.770 164 126 80 95 172 16-60 70 134±1 90 21 18 0,055 0,18

78 5.600 11.100 5.800 171 127,5 107 250 215 20-78 62 61 76 27 24 0,139 0,09 70 4.300 8.600 5.140 184 147 95 112 193 20-70 80 145±2 100 31 27 0,103 0,25

98 8.500 17.400 4.700 210 156 133 285 250 26-98 76 55 92 43 35 0,27 0,14 90 7.000 14.000 4.310 220 176 112 135 230 25-85 95 156±2 130 50 43 0,24 0,38

100 11.600 23.200 3.810 240 200 135 160 260 30-100 105 186±2 140 73 61 0,43 0,56
112 14.000 28.200 4.200 234 181,5 152 335 285 30-112 90 100 108 73 63 0,70 0,29
125 19.000 38.000 3.420 270 230 160 185 290 35-120 120 195±2 150 105 85 0,76 0,79
132 23.000 45.600 3.600 274 210,5 178 370 320 35-132 105 105 125 106 86 1,16 0,42

156 35.100 69.600 3.200 312 248,5 209 410 360 70-156 120 115 140 148 119 1,96 0,60 145 27.000 54.000 3.000 310 256 185 210 330 45-140 135 210±2 160 153 128 1,46 1,04

174 44.400 88.000 2.900 337 274 234 435 385 85-174 135 123 162 180 145 2,69 1,04 165 39.000 78.000 2.750 340 292 210 230 360 55-160 150 242±3 190 207 170 2,35 1,79

190 68.500 139.600 2.600 380 308,5 254 520 450 95-190 150 166 180 282 232 6,10 1,73 185 54.000 108.000 2.450 380 315 230 255 405 60-180 170 265±3 210 277 223 3,96 2,27

210 84.600 167.600 2.400 405 334 279 560 490 110-210 175 170 205 340 277 8,35 2,48 205 69.000 138.000 2.300 405 340 255 290 432 70-200 185 300±3 230 357 285 5,76 2,88

233 151.000 304.000 2.200 444 365,5 305 590 520 120-233 190 182 218 412 318 10,74 3,46 230 98.000 196.000 2.020 445 377 290 320 490 100-220 200 320±3 250 470 386 9,84 3,68

275 205.500 407.000 2.000 506 424 355 660 590 130-275 220 208 252 603 443 78,83 5,31 260 130.000 260.000 1.870 490 415 320 360 530 115-250 230 354±3 280 627 508 15,40 4,95

From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please, From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category. holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings. (1) The torque of the coupling does not include the connection (5) Weight and moment of inertia are given for minimum bore.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore. transmission capacity. (6) Weight is given for maximum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore. (2) Minimun dimensions refer to already machined bore. (7) The amount of grease indicated in the catalogue is for guidance only.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only. For A00 rough bore dimensions contact Jaure. For exact amount please refer to coupling instructions.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions. (3) Max. allowable bore for couplings with DIN 6885/1 keys. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure. For other types of keys or connections please contact JAURE.
(4) Clearance to align coupling hubs and replacement of sealing rings.

Technical modifications reserved Technical modifications reserved

32 ® ®
33
 PLMT
Rigid Industrial
Marine
designs
l1 l2

Ød2
Ød1
ØD1
ØD

Designation example: PLMT-78

GENERAL DIMENSIONS WEIGHT WEIGHT

SIZE TP MAX (mm) MAX. MIN. (5)
(1)(6) (4)

d1-d2
PLMT Nm D D1 (Min-Max) l1-l2 kg kg
(2)(3)d

52 3400 111 80 14-55 43 4,3 2,8

62 12600 141 100 17-70 50 8,3 5,4

78 20600 171 125 20-90 62 15 9

98 39100 210 148 26-105 76 26 16

112 59600 234 173 30-120 90 39 24

Jaure marine style gear couplings are operating for years in a variety
132 99400 274 204 35-145 105 64 39

156 115100 312 242 70-170 120 93 58

of applications such as main propulsion & maneuvering of vessels,
174 156900 337 268 85-190 135 123 75 dredging including underwater use, fire fighting pumps, winches…
190 193200 380 302 95-215 150 177 109

210 363200 405 327 110-230 175 232 144

MARINE TYPE APPROVAL &
233 394400 444 354 120-250 190 283 170
MANUFACTURING SURVEY ARRANGEMENT
275 680600 506 410 130-290 220 442 260
The Jaure MT gear couplings can be also delivered on demand
with the 3.2 certificate of any Marine Classification Society.
From size 174 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
 Jaure is additionally awarded with the Manufacturing Survey
Arrangement – MSA from DNV. The MSA certificate is our
(1) The torque of the coupling does not include the connection (4) Weight is given for minimum bore. commitment to continuously improve the service and response
transmission capacity. (5) Weight is given for maximum bore.
time to our customers and remain competitive in the market place.
(2) Minimun dimensions refer to already machined bore. (6) Maximum torque transmited through bolted joints.
For A00 rough bore dimensions contact Jaure. (7) Body fitted bolts (Grade 10,9) are used.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (8) Special version available for flying drive applications with bending
For other types of keys or connections please contact JAURE. moments.

Technical modifications reserved

34 ® ®
35
 MT/MT-HD MTG/MTG-HD
Basic Design Marine Basic Design Marine

S S S

l1 a l2 a
l1 l2

ØD1
Ød1

Ød2
øD2
ØD

øD2
øD

ød2
ød1

øD1
Designation example: MT-125 Designation example: MTG-370

MT MT-HD MTG MTG-HD

n MAX WEIGHT WEIGHT MOMENT GREASE n MAX WEIGHT WEIGHT MOMENT OF GREASE
SIZE TN TP TN TP (8) GENERAL DIMENSIONS MAX MIN OF INERTIA QTY. SIZE TN TP MAX TN TP MAX (8) GENERAL DIMENSIONS MAX. (5) MIN. (6) INERTIA (5) QTY.(7)
NOMINAL MAX NOMINAL MAX (5) (6) (5) (7) NOMINAL (1) NOMINAL (1)
(1) (1) (1) (1) (1) (1)

MT Nm Nm Nm Nm rpm D D1 D2 d1-d2 l1- l2 a S(4) kg kg J (kgm2 ) kg MTG d1-d2 2

MT-HD (Min-Max) MTG-HD Nm Nm Nm Nm rpm D D1 D2 (min-max) l1-l2 a S(4) kg kg J (kgm ) kg
(2)(3) (2)(3)

42 1.200 2.400 1.980 3.960 8.600 116 80 60 13-44 55 6 75 5 4 0,006 0,03 280 220.000 440.000 363.000 726.000 1.800 540 465 370 140-280 250 16 300 527 346 14,95 4

55 2.600 5.200 4.290 8.580 6.600 152 100 79 16-58 70 6 90 10 7 0,021 0,06 310 250.000 500.000 412.500 825.000 1.600 585 505 410 160-310 270 16 320 676 442 22,93 5,05

70 5.000 10.000 8.250 16.500 5.600 178 125 101 20-75 80 6 108 17 12 0,048 0,09 345 320.000 640.000 528.000 1.056.000 1.500 650 548 450 180-345 290 16 340 884 574 36,84 5,87

90 8.600 17.200 14.190 28.380 4.700 213 148 124 25-95 95 8 124 28 18 0,125 0,14 370 400.000 800.000 660.000 1.320.000 1.400 690 588 490 210-370 325 20 370 1.105 733 53,16 7,16

100 14.000 28.000 23.100 46.200 4.200 240 173 143 30-105 105 8 136 40 27 0,20 0,29 390 510.000 1.020.000 841.500 1.683.000 1.300 760 640 520 230-390 345 20 400 1.379 957 79,63 10,70

125 20.600 41.200 33.990 67.980 3.600 279 204 170 35-130 120 8 158 65 42 0,48 0,42 420 660.000 1.320.000 1.089.000 2.178.000 1.200 805 690 560 250-420 365 20 420 1.667 1.154 110 12

145 33.000 66.000 54.450 108.900 3.150 318 242 205 45-150 135 10 172 95 61 0,93 0,60 460 780.000 1.560.000 1.287.000 2.574.000 1.100 850 730 600 275-460 400 20 450 2.043 1.372 153 13,80

165 45.600 91.200 75.240 150.480 2.860 346 268 216 55-165 150 10 192 134 89 1,55 1,04 500 1.000.000 2.000.000 1.650.000 3.300.000 1.050 930 780 650 300-500 410 25 490 2.452 1.643 217 16,81

185 61.400 122.800 101.310 202.620 2.580 389 302 250 60-190 170 10 210 185 117 2,70 1,73 550 1.200.000 2.400.000 1.980.000 3.960.000 950 995 850 710 325-550 430 25 520 3.035 1.991 313 18,62

205 80.800 161.600 133.320 266.640 2.320 425 327 275 70-210 185 12 230 240 151 4,10 2,48 590 1.600.000 3.200.000 2.640.000 5.280.000 900 1.055 910 760 350-590 470 25 550 3.720 2.413 434 28,29

230 105.500 211.000 174.075 348.150 2.200 457 354 300 100-230 200 12 250 273 167 5,55 3,46 620 1.800.000 3.600.000 2.970.000 5.940.000 850 1.140 970 810 375-620 500 30 600 4.648 3.145 633 25,19

260 161.000 322.000 265.650 531.300 2.000 527 410 340 115-260 230 12 280 412 258 9,15 5,31 650 1.900.000 3.800.000 3.135.000 6.270.000 800 1.190 1.020 840 400-650 520 30 630 5.152 3.469 765 33,47

680 2.100.000 4.200.000 3.465.000 6.930.000 750 1.250 1.080 890 425-680 540 30 650 5.954 4.077 990 50,61
From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
730 2.600.000 5.200.000 4.290.000 8.580.000 700 1.300 1.150 950 450-730 570 30 680 6.956 4.634 1.277 54,26
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
800 3.800.000 7.600.000 6.270.000 12.540.000 660 1.420 1.270 1.050 475-800 600 30 725 9.036 5.971 1.980 72,95

900 5.420.000 10.840.000 8.943.000 17.886.000 590 1.600 1.430 1.180 500-900 670 35 800 13.330 8.670 3.663 91,90

1.000 7.250.000 14.500.000 11.962.500 23.925.000 550 1.740 1.570 1.320 525-1000 740 35 890 17.975 11.130 5.766 112,98
(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
1.100 8.650.000 17.300.000 14.272.500 28.545.000 500 1.880 1.710 1.450 550-1100 800 35 980 23.150 13.930 8.683 135
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore. 1.200 10.750.000 21.500.000 17.737.500 35.475.000 480 1.990 1.830 1.580 575-1200 850 35 1.030 28.605 16.680 12.239 162,50

For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions. The coupling is supplied by default with puller holes. If required, puller Adapted hub length available upon request. ATEX certifications are available. Please,
holes can also be made for smaller sizes. contact JAURE to define the zone and category.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
Setscrews can be included upon request.

(1) The torque of the coupling does not include the connection For other types of keys or connections please contact JAURE. For exact amount please refer to coupling instructions.
transmission capacity. (4) Clearance to align coupling hubs and replacement of sealing rings. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
(2) Minimun dimensions refer to already machined bore. (5) Weight and moment of inertia are given for minimum bore.
For A00 rough bore dimensions contact Jaure. (6) Weight is given for maximum bore.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (7) The amount of grease indicated in the catalogue is for guidance only.

Technical modifications reserved Technical modifications reserved

36 ® ®
37
 MTD/MTD-HD MTGD / MTGD-HD
With Floating Shaft Marine With Intermediate Floating Shaft Marine

Complete MTD coupling

Complete MTGD coupling

a
Ød1

Ød3

l1 l
a

Ød2
Ød1
ØD1
ØD3

ØD2
ØD

l1 l

Ød2
Ød1
ØD1
Ød1
ØD3

ØD2
Ød3
ØD
l1 DBSE l2

Half MTD coupling

Half MTGD coupling l1 DBSE (4) l2

Size MTD 42-260

Designation example: MTD-125 / DBSE = 1200 (mm) / n = 1500 rpm Designation example: MTGD-370 / DBSE=1200 (mm) / n = 750 rpm

MTD MTD-HD MTGD MTGD-HD

n MAX WEIGHT WEIGHT MOMENT GREASE n WEIGHT WEIGHT WEIGHT MOMENT MOMENT GREASE
SIZE TN TP TN TP (8) GENERAL DIMENSIONS MAX (5) MAX (6) OF INERTIA QTY. SIZE MAX GENERAL DIMENSIONS MAX. PER MIN. OF OF INERTIA QTY.
NOMINAL MAX NOMINAL MAX (5) (7) TN TP TN TP (8) (5) 100MM (6) INERTIA PER (7)
(1) (1) (1) (1) NOMINAL MAX NOMINAL MAX SHAFT (5) 100MM
(1) (1) (1) (1) SHAFT
MTD Nm Nm Nm Nm rpm d1-d2 d3
MTD-HD D D1 D2 D3 l1-l2 a kg. kg. J (kgm2) kg. MTGD d1-d2 d3 2 2
(Min-Max) (Min-Max) MTGD- Nm Nm Nm Nm rpm D D1 D2 D3 (Min-Max (Min-Max) l-l1-l2 a kg kg kg J (kgm ) J (kgm ) kg
(2)(3) (2)(3) HD (2)(3) (2)(3)

42 1.200 2.400 1.980 3.960 116 80 60 13-55 80 13-44 55 7 20,7 20 0,014 0,03 280 220.000 440.000 363.000 726.000 540 465 370 410 140-290 140-280 250 16 1.980 55,5 1.781 33 0,624 1,73

55 2.600 5.200 4.290 8.580 152 100 79 16-70 100 16-58 70 7 38 35 0,050 0,06 310 250.000 500.000 412.500 825.000 585 505 410 460 160-350 160-310 270 16 2.470 67,1 2.147 51 0,914 2,19

70 5.000 10.000 8.250 16.500 178 125 101 20-90 125 20-75 80 7 61 56 0,116 0,09 345 320.000 640.000 528.000 1.056.000 650 548 450 500 180-380 180-345 290 16 3.072 82,1 2.671 79 1,368 2,52
For max. Allowable speed

370 400.000 800.000 660.000 1.320.000 690 588 490 540 210-410 210-370 325 20 3.632 93,8 3.135 109 1,78 3,03
check fig nº8 at page 14

90 8.000 16.000 13.200 26.400 213 148 124 25-105 148 25-95 95 8 100 90 0,289 0,14
390 510.000 1.020.000 841.500 1.683.000 760 640 520 590 230-450 230-390 345 20 4.258 103,6 3.621 155 2,18 3,64
100 14.000 28.000 23.100 46.200 240 173 143 30-120 173 30-105 105 8 149 136 0,49 0,29

For max. allowable speed contact Jaure

420 660.000 1.320.000 1.089.000 2.178.000 805 690 560 630 250-480 250-420 365 20 5.021 122,1 4.266 210 3,02 4,52
125 20.600 41.200 33.990 67.980 279 204 170 35-145 204 35-130 120 8 211 188 1,14 0,42
460 780.000 1.560.000 1.287.000 2.574.000 850 730 600 680 275-520 275-460 400 20 6.056 145,0 5.096 296 4,26 4,83
145 33.000 66.000 54.450 108.900 318 242 205 45-170 242 45-150 135 10 300 266 2,19 0,60
500 1.000.000 2.000.000 1.650.000 3.300.000 930 780 650 730 300-560 300-500 410 25 7.161 169,9 6.031 418 5,85 7,05
165 45.600 91.200 75.240 150.480 346 268 216 55-190 268 55-165 150 10 397 352 3,54 1,04
550 1.200.000 2.400.000 1.980.000 3.960.000 995 850 710 790 325-600 325-550 430 25 8.646 203,8 7.297 592 8,42 7,38
185 61.400 122.800 101.310 202.620 389 302 250 60-215 302 60-190 170 10 539 471 6,30 1,73
590 1.600.000 3.200.000 2.640.000 5.280.000 1.055 910 760 850 350-650 350-590 470 25 10.316 237,0 8.577 822 11,39 9,58
205 80.800 161.600 133.320 266.640 425 327 275 70-230 327 70-210 185 11 673 584 9,42 2,48
620 1.800.000 3.600.000 2.970.000 5.940.000 1.140 970 810 890 375-680 375-620 500 30 11.848 260,5 9.864 1.096 13,76 11,95
230 105.500 211.000 174.075 348.150 457 354 300 100-250 354 100-230 200 11 786 680 12,74 3,46
650 1.900.000 3.800.000 3.135.000 6.270.000 1.190 1.020 840 930 400-710 400-650 520 30 13.094 285,1 10.887 1.331 16,48 14,30
260 161.000 322.000 265.650 531.300 527 410 340 115-290 410 115-260 230 12 1115 961 23,13 5,31
680 2.100.000 4.200.000 3.465.000 6.930.000 1.250 1.080 890 1.010 425-770 425-680 540 30 15.177 319,6 12.432 1.777 20,71 20,26

730 2.600.000 5.200.000 4.290.000 8.580.000 1.300 1.150 950 1.060 450-810 450-730 570 30 17.501 375,1 14.313 2.276 28,53 21,56
From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category. 800 3.800.000 7.600.000 6.270.000 12.540.000 1.420 1.270 1.050 1.170 475-900 475-800 600 30 21.610 435,0 17.286 3.410 38,37 26,62
Distance to be specified by the customer. DBSE is distance between shafts
ends, not between flanges. 900 5.420.000 10.840.000 8.943.000 17.886.000 1.600 1.430 1.180 1.330 500-900 500-900 670 35 29.654 556,4 23.292 6.125 62,77 35,18

1.000 7.250.000 14.500.000 11.962.500 23.925.000 1.740 1.570 1.320 1.470 525-1000 525-1000 740 35 29.506 692,7 20.575 7.999 97,30 43,69

1.100 8.650.000 17.300.000 14.272.500 28.545.000 1.880 1.710 1.450 1.610 550-1100 550-1100 800 35 36.272 829,6 24.332 10.894 140 55,48

1.200 10.750.000 21.500.000 17.737.500 35.475.000 1.990 1.830 1.580 1.730 575-1200 575-1200 850 35 43.404 978,8 28.607 16.590 194 54,62
(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore and 1m DBSE. The coupling is supplied by default with puller holes. If required, puller Setscrews can be included upon request. ATEX certifications are available. Please,
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only. holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

(1) The torque of the coupling does not include the connection (4) Distance to be specified by the customer. (7) The amount of grease indicated in the catalogue is for guidance only.
transmission capacity. DBSE is distance between shafts ends, not between flanges. For exact amount please refer to coupling instructions.
(2) Minimun dimensions refer to already machined bore. (5) Weight, moment of inertia and torsional stiffness are (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For A00 rough bore dimensions contact Jaure. given for minimum bore and 2.5 m DBSE for full MTGD coupling.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (6) Weight is given for maximum bore and 2.5 m DBSE for full MTGD coupling.
For other types of keys or connections please contact JAURE.

Technical modifications reserved Technical modifications reserved

38 ® ®
39
 MTX/MTX-HD MTGX/MTGX-HD
With Spacer Marine With Spacer Marine

S S
S

l1 DBSE l2

ød2

øD1
l1 DBSE l2
ød1
øD2
øD

Ød1

Ød2
ØD2
ØD

ØD1
Designation example: MTX-125 Designation example: MTGX-370 / DBSE= 1000 (mm) / n= 750rpm

MTX MTX-HD MTGX MTGX-HD

GREASE n WEIGHT WEIGHT MOMENT MOMENT GREASE
SIZE TN TP TN TP n MAX GENERAL DIMENSIONS WEIGHT WEIGHT MOMENT QTY. SIZE TN TP TN TP MAX GENERAL DIMENSIONS WEIGHT PER MIN. OF OF INERTIA QTY.
NOMINAL MAX NOMINAL MAX (8) MAX (5) MIN (6) OF INERTIA NOMINAL MAX NOMINAL MAX (8) MAX. (5) 100MM (6) INERTIA PER 100MM (7)
(5) (7) SPACER SPACER
(1) (1) (1) (1) (1) (1) (1) (1)

MTGX Nm Nm Nm Nm rpm d1-d2 2 2

MTX d1-d2 MTGX- D D1 D2 (min-max) l1-l2 S(4) kg kg kg J (kgm ) J (kgm ) kg
MTX-HD Nm Nm Nm Nm rpm D D1 D2 (Min-Max) l1- l2 S(4) kg kg J(kgm2) kg HD (2)(3)
(2)(3)
280 220.000 440.000 363.000 726.000 540 443 370 140-280 250 300 765 25,0 584 23 0,72 1,73
42 1.200 2.400 1.980 3.960 116 80 60 13-44 55 75 15 14 0,018 0,03
310 250.000 500.000 412.500 825.000 585 488 410 160-310 270 320 935 27,8 700 33 0,99 2,19
55 2.600 5.200 4.290 8.580 152 100 79 16-58 70 90 25 22 0,052 0,06
345 320.000 640.000 528.000 1.056.000 650 531 450 180-345 290 340 1.178 31,6 868 53 1,45 2,52
70 5.000 10.000 8.250 16.500 178 125 101 20-75 80 108 39 34 0,107 0,09
370 400.000 800.000 660.000 1.320.000 690 571 490 210-370 325 370 1.450 36,4 1.078 71 1,64 3,03
For max. Alowable speed
check fig nº7 at page 14

90 8.600 17.200 14.190 28.380 213 148 124 25-95 95 124 62 52 0,285 0,14
390 510.000 1.020.000 841.500 1.683.000 760 627 520 230-390 345 400 1.816 46,2 1.394 108 2,55 3,64
100 14.000 28.000 23.100 46.200 240 173 143 30-105 105 136 81 68 0,05 0,29

For max. allowable speed consult JAURE.

420 660.000 1.320.000 1.089.000 2.178.000 805 673 560 250-420 365 420 2.072 46,4 1.559 142 3,19 4,52
125 20.600 41.200 33.990 67.980 279 204 170 35-130 120 158 120 97 0,99 0,42
460 780.000 1.560.000 1.287.000 2.574.000 850 717 600 275-460 400 450 2.486 56,2 1.815 193 4,59 4,83
145 33.000 66.000 54.450 108.900 318 242 205 45-150 135 172 173 139 1,77 0,60
500 1.000.000 2.000.000 1.650.000 3.300.000 930 769 650 300-500 410 490 2.997 61,2 2.188 279 5,90 7,05
165 45.600 91.200 75.240 150.480 346 268 216 55-165 150 192 235 190 2,84 1,04
550 1.200.000 2.400.000 1.980.000 3.960.000 995 834 710 325-550 430 520 3.563 65,0 2.519 389 8,04 7,38
185 61.400 122.800 101.310 202.620 389 302 250 60-190 170 210 344 276 5,48 1,73
590 1.600.000 3.200.000 2.640.000 5.280.000 1.055 894 760 350-590 470 550 4.370 81,6 3.062 533 11,06 9,58
205 80.800 161.600 133.320 266.640 425 327 275 70-210 185 230 388 299 6,99 2,48
620 1.800.000 3.600.000 2.970.000 5.940.000 1.140 944 810 375-620 500 600 5.475 92,5 3.972 781 13,06 11,95
230 105.500 211.000 174.075 348.150 457 354 300 100-230 200 250 446 340 9,87 3,46
650 1.900.000 3.800.000 3.135.000 6.270.000 1.190 984 840 400-650 520 630 5.940 89,3 4.257 929 14,52 14,30
260 161.000 322.000 265.650 531.300 527 410 340 115-260 230 280 660 506 17,14 5,31
680 2.100.000 4.200.000 3.465.000 6.930.000 1.250 1.059 890 425-680 540 650 6.810 94,9 4.934 1.188 17,39 20,26

From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please, 730 2.600.000 5.200.000 4.290.000 8.580.000 1.300 1.109 950 450-730 570 680 7.758 106 5.436 1.493 24,22 21,56
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
Distance to be specified by the customer. DBSE is distance between shafts 800 3.800.000 7.600.000 6.270.000 12.540.000 1.420 1.224 1.050 475-800 600 725 9.990 141,7 6.924 2.270 38,80 26,62
ends, not between flanges.
900 5.420.000 10.840.000 8.943.000 17.886.000 1.600 1.384 1.180 500-900 670 800 14.308 176,1 9.682 4.084 62,50 35,18

1.000 7.250.000 14.500.000 11.962.500 23.925.000 1.740 1.524 1.320 525-1000 740 890 18.746 198,3 12.136 6.265 89,19 43,69

1.100 8.650.000 17.300.000 14.272.500 28.545.000 1.880 1.664 1.450 550-1100 800 980 23.940 230 14.988 9.238 118,66 55,48

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings 1.200 10.750.000 21.500.000 17.737.500 35.475.000 1.990 1.784 1.580 575-1200 850 1.030 29.217 254,1 17.590 12.806 159,84 54,62

transmission capacity. (5) Weight and moment of inertia are given for minimum bore and 1m DBSE.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore and 1m DBSE. The coupling is supplied by default with puller holes. If required, puller Setscrews can be included upon request. ATEX certifications are available. Please,
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only. holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.
Distance to be specified by the customer. DBSE is distance between shafts
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions. ends, not between flanges.
For other types of keys or connections please contact JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

(1) The torque of the coupling does not include the connection For other types of keys or connections please contact JAURE. (7) The amount of grease indicated in the catalogue is for guidance only.
transmission capacity. (4) Clearance to align coupling hubs and replacement of sealing rings. For exact amount please refer to coupling instructions.
(2) Minimun dimensions refer to already machined bore. (5) Weight, moment of inertia and torsional stiffness are given for (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For A00 rough bore dimensions contact Jaure. minimum bore and 1m DBSE.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. (6) Weight is given for maximum bore and 1m DBSE.

Technical modifications reserved Technical modifications reserved

40 ® ®
41
 MTX-LI MTD-LE
Oil Lubricated With Spacer Marine Lubricated With Floating Shaft Marine

Designation example: MTX-LI-125 DBSE=360 / n: 1500rpm Designation example: MTD-LE-125 DBSE=360 / n: 1500rpm

TN TP n MAX WEIGHT WEIGHT MOMENT TN TP

SIZE NOMINAL MAX (6) GENERAL DIMENSIONS MAX. MIN. OF SIZE NOMINAL MAX n MAX GENERAL DIMENSIONS WEIGHT WEIGHT MOMENT OF
(1) (1) (4) (5) INERTIA (4) (1) (1) (6) MAX. (4) MIN. (5) INERTIA (4)

MTX-LI d1-d2 d1-d2 d3

Nm Nm rpm D D1 (min-max) l1-l2 kg. kg. J (kg m2) MTD-LE Nm Nm rpm D D1 (min-max) (min-max) l1-l2 kg. kg. J (kg m2)
(2)(3) (2)(3) (2)
100 14.000 28.000 246 175 30-105 105 92 78 0,58 100 14.000 28.000 178 143 30-135 30-105 105 118 96 0,32
125 20.600 41.200 287 204 35-130 120 128 104 1,19 125 20.600 41.200 209 170 35-160 35-130 120 182 146 0,68
145 33.000 66.000 325 242 45-150 135 165 131 1,78 145 33.000 66.000 247 205 45-185 45-150 135 266 213 1,44
For max. allowable speed,

For max. allowable speed,

see Fig. Nº 7 on page 14

see Fig. Nº 8 on page 14

165 45.600 91.200 351 268 55-165 150 225 180 2,86 165 45.600 91.200 273 216 55-205 55-165 150 331 259 2,20
185 61.400 122.800 395 302 60-190 170 303 235 5,16 185 61.400 122.800 307 250 60-230 60-190 170 459 356 4,01
205 80.800 161.600 420 327 70-210 185 393 303 7,31 205 80.800 161.600 332 275 70-250 70-210 185 572 441 6,03
230 105.500 211.000 447 354 100-230 200 483 377 12,14 230 105.500 211.000 359 300 100-270 100-230 200 697 542 8,86
260 161.000 322.000 520 410 115-260 230 680 526 19,31 260 161.000 322.000 415 340 115-315 115-260 230 986 742 17,04
280 220.000 440.000 552 442 135-280 250 861 676 26,48 280 220.000 440.000 470 370 135-355 135-280 250 1267 935 28,22
310 250.000 500.000 596 486 155-310 270 1054 814 38,84 310 250.000 500.000 491 410 155-375 155-310 270 1529 1141 38,84
345 320.000 640.000 662 532 175-345 290 1220 904 56,12 345 320.000 640.000 537 450 175-410 175-345 290 1914 1422 59,29

From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category. From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection (4) Weight and moment of inertia are given for minimum bore d1-d2
transmission capacity. and 1m DBSE. (1) The torque of the coupling does not include the connection (4) Weight and moment of inertia are given for minimum bore d1-d2;
(2) Minimun dimensions refer to already machined bore. (5) Weight is given for maximun bore d1-d2 and 1m DBSE. transmission capacity. maximun bore d3 and 1m DBSE.
For A00 rough bore dimensions contact Jaure. (6) n MAX speed for balanced couplings. For higher speeds contact Jaure. (2) Minimun dimensions refer to already machined bore. (5) Weight is given for maximun bore d1-d2; maximun bore d3 and 1m DBSE.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For A00 rough bore dimensions contact Jaure. (6) n MAX speed for balanced couplings. For higher speeds contact Jaure.
For other types of keys or connections please consult JAURE. (3) Max. allowable bore for couplings with DIN 6885/1 keys.
For other types of keys or connections please contact JAURE.

Technical modifications reserved Technical modifications reserved

42 ® ®
43
 MTV
For Vertical Installation Marine
Other
Marine
øD

øD2
designs
information
MT Designs
ød1
l1

Top Chamber

& References
Bottom Chamber
a
G

l2

ød2

øD1

Designation example: MTV-42

GREASE GREASE
TN TP n MAX MOMENT QTY. QTY.
SIZE NOMINAL MAX (8) GENERAL DIMENSIONS WEIGHT WEIGHT OF TOP BOTTOM
(1) (1) MAX (5) MIN (6) INERTIA
(5) CHAMBER CHAMBER
(7) (7)

d1-d2 2
MTV Nm Nm rpm D D1 D2 (Min-Max) l1- l2 a G S(4) kg kg J(kgm ) kg kg
(2)(3)

42 1.200 2.400 8.600 116 80 60 13-44 55 8 3 75 5 4 0,006 0,018 0,017

55 2.600 5.200 6.600 152 100 79 16-58 70 8 3 90 10 7 0,021 0,038 0,032

70 5.000 10.000 5.600 178 125 101 20-75 80 8 3 108 17 12 0,048 0,056 0,046

90 8.600 17.200 4.700 213 148 124 25-95 95 9 3 124 29 19 0,125 0,100 0,068

100 14.000 28.000 4.200 240 173 143 30-105 105 9 3 136 44 31 0,20 0,184 0,142

125 20.600 41.200 3.600 279 204 170 35-130 120 12 5 158 68 45 0,48 0,279 0,210

145 33.000 66.000 3.150 318 242 205 45-150 135 13 5 172 100 66 0,90 0,392 0,298

165 45.600 91.200 2.860 346 268 216 55-165 150 13 5 192 134 89 1,45 0,669 0,511

185 61.400 122.800 2.580 389 302 250 60-190 170 14 5 210 190 122 2,70 1,052 0,865

205 80.800 161.600 2.320 425 327 275 70-210 185 16 6 230 255 166 4,15 1,465 1,240

230 105.500 211.000 2.200 457 354 300 100-230 200 16 6 250 285 179 5,60 1,996 1,727

260 161.000 322.000 2.000 527 410 340 115-260 230 16 6 280 420 266 9,35 3,097 2,641

From size 185 (included) the coupling is supplied by default with puller Setscrews can be included upon request. ATEX certifications are available. Please,
holes. If required, puller holes can also be made for smaller sizes. Adapted hub length available upon request. contact JAURE to define the zone and category.

(1) The torque of the coupling does not include the connection (4) Clearance to align coupling hubs and replacement of sealing rings.
transmission capacity. (5) Weight and moment of inertia are given for minimum bore.
(2) Minimun dimensions refer to already machined bore. (6) Weight is given for maximum bore.
For A00 rough bore dimensions contact Jaure. (7) The amount of grease indicated in the catalogue is for guidance only.
(3) Max. allowable bore for couplings with DIN 6885/1 keys. For exact amount please refer to coupling instructions.
For other types of keys or connections please consult JAURE. (8) n MAX speed for balanced couplings. For higher speeds contact Jaure.

Technical modifications reserved

44 ® ®
45
 Shaft Connections Recommendations
Types For Shaft/Bore Fits

A00 A01 A02

The following recommendations, according to ISO, are given for shaft/bores fits.
Pilot Cylindrical Hexagonal

TYPE OF FIT SHAFT TOLERANCES BORE TOLERANCES

h6 S7
k6 M7
B01 B02 B03 B04 Interference fits
m6 K7
with parallel keyway
n6 J7
One keyway Two keyways Two keyways Two keyways
at 180° at 120° at 90° p6 H7
u6
Shrink fits*
v6 H7
without parallel key
x6
C01 C02 B05
Conical bore Conical bore
One straight Two straight Two tangencial
keyway keyways keyways at 120° * The stresses on the hub must be checked.
For other types of connection please consult our technical department. For one
keyway a keyway tolerance width ISO P9 is recommended. For double keyway ISO JS9
is recommended.
D01 D02

Conical bore Conical bore

One tapered Two tapered
keyway keyways
Axial Forces Induced
E01 E02 E03
By Gear Couplings
Shrink fit Shrink fit with Shrink fit
two diameters and keyway
Gear couplings accomodate the misalignment through the sliding of the hub
teeth over the sleeve teeth. This sliding imposes axial forces at the nearby
bearings. This force has to be taken into account when designing the machine
and the thrust bearings:
F01 F02 F03

Tapered With conical With Safeset®

Shrink fit sleeve
2x Tn x µ
Fa=
Øp x 0,94

G01 G02 G03 Fa = Axial Force (KN)

According According With
Tn = Nominal Torque to be transmitted (KNm)
DIN 5480 DIN 5480 clamping µ = Friction coefficient (µ=0,05 for good lubrication, µ = 0,3 for axial lock up)
With centering ring
diameter Øp = Pitch diameter of the gear mesh (in meters), Take D1 from catalogue as an
approximate dimension or consult Jaure for a more accurate calculation.

Technical modifications reserved

46 ® ®
47
 MT Designs MT Designs

Type MTST-B with Safeset ® safety element

Type MTSD Horizontal Floating shaft Type MT-UW for underwater Type MTEL Disengaging Coupling
Safeset ® is a trade mark from Voith

Type MTSR-P with Safeset ® safety element

Type TE Gear Coupling for lifting gear drums Type MTVS Vertical Coupling Type MTNCO special Telescopic Coupling
Safeset ® is a trade mark from Voith

Type MTAE with Electrical insulation Type MTNR with special cover design Type MTL Limited end Float Type MT in combination with a elastic coupling

Type MTX-ER with a safety spacer Type MTAD for high misalignament Type MT in combination with a disc pack coupling Type SID Metallurgy Standard (FRANCE)

48 ® ®
49
 Required
MT Designs
Minimum Data
6) DISTANCE
DRIVER BETWEEN DRIVEN
1) TYPE OF DRIVER 4) DRIVER SHAFT DIA
SHAFT ENDS 7) TYPE OF DRIVEN
8) DRIVEN SHAFT DIA
2) DRIVER HP AND TYPE OF CONNECTION AND TYPE OF CONNECTION

3) DRIVER RPM
5) DRIVER SHAFT 9) DRIVEN SHAFT
USABLE LENGTH USABLE LENGTH

10) TOTAL MOUNTING LENGTH

1. Type of driver (Electric Motor, Combustion Engine, Gearbox, etc.):

2. Driver Power:

3. Operating Speed (rpm):

Type MTBLX Spacer Shear pin Coupling Type MTBRX Spacer Shear pin Coupling
4. Driver Shaft Diameter:
Type of connection (hub to shaft connection):

5. Driver Usable Shaft Lengh:

(Measure from the end of the shaft to any obstruction)

6. Distance between shaft ends (DBSE):

7. Type of Driven Equipment:

Type AVLE High Speed Oil Lubrication Type ALT Spindle Coupling (Rolling Mill) 8. Driven Shaft Diameter:
Type of connection (hub to shaft connection):

9. Driven Usable Shaft Lengh:

(Measure from the end of the shaft to any obstruction)

10. Total Mounting Length:

(Advise of any obstructions, walls, beams, guards, pipes, etc.)

11. Misalignment:
Angular:

Type ALD Spindle Coupling (Rolling Mill) Type ALST Telescopic Spindle Coupling (Rolling Mill) Offset:
Axial:
12. Ambient temperature:

13. Potential excitation or critical frequencies:

(Torsional, Axial, Lateral)

14. Space limitations:

15. Limitation on coupling generated forces:

(Axial, Moments, Unbalance)
Type ALSTOL Spindle with continuous lubrication Type MT Special with telescopic shaft
16. Balance requirements:

50 ® ®
51
 MT References:

Steel main drive gear coupling Heavy duty MT gear couplings Gear coupling with JCFS carbon fiber shaft Shear pin gear couplings in steel mill

Intermediate gear coupling for HRM Disengaging gear with lever Disengaging gear coupling with pneumatic lever Jaure gear spindles

Gear inspection in CMM Gear coupling with brake MT gear hub Jaure MTGX-HD-TI-1000 on wind test bench

52 ® ®
53
 MT References:

Jaure gear with JGFS glass fiber composite spacer In house testing of penumatic lever Jaure MTG gear couplings Nitrided gear hub

Jaure PLMT rigid coupling Jaure gear coupling with brake for hoisting Case carburized gear spindles Dredger gear coupling

Jaure gear coupling for underwater operation Shear pin type gear coupling Gear clutching Packing of MTG-HD gear coupling

54 ® ®
55
 Jaure manufacturing program
COUPLINGS

AL-S / AL-SD / JFTL TORQUE

Product Brand Name MT LAMIDISC ® TCB / TCB-HD RECORD JAUFLEX® IXILFLEX® COMPOLINK® JCFS JHC
ALD LIMITER

Barrel Grid / Hydraulic fit

Type & Description Gear Disc pack Gear spindles Elastic Elastic Link Composite Link Torque Limiter Composite Shafts
(drum type) spring type (shaft couplings)

INDUSTRY APPLICATION

Metals & Heavy duty • • • • • • • •

Minerals & Mills • • • • • • •
Crane & Hoisting • • • • • •
Pulp & Paper • • • • • • •
Petrochemical / Oil & Gas • • • • • •
Cooling Towers • • •
Machine Tools • • • •
Marine • • • • • • • • •
Wind Turbines • • • • • • • •
Test Benches • • • • • •
Railway • • • • •

Special safety heavy duty gas LAMIDISC® Safety coupling on test Type Approvals (Marine & Wind). Carbon Fibre Shaft combined with Torque monitoring on wind turbines. Double-gear couplings for railway.
nitrided gears bench Incl. SAFESET® LAMIDISC® coupling.
(SAFESET® from VOITH TURBO)

56 ® ®
57
 Kop-Flex & Jaure Global presence
manufacturing program MANUFACTURING FACILITIES & ENGINEERING CENTERS

COUPLINGS

CHINA
CANADA GERMANY
KOPFLEX SLOVAKIA
Product Brand Name MAX-C ® HIGH PERFORMANCE PROGRAM SERVICE SPAIN
GREASE USA
ROMANIA

Heavy duty Gear coupling Repair & INDIA

Type & Description elastic GEAR DISC DIAPHRAGM / spindle maintenance MÉXICO
coupling grease program
SINGAPORE

INDUSTRY APPLICATION

Metals & Heavy duty • • •

Minerals & Mills • • •
Crane & Hoisting • • •
JAURE® & KOP-FLEX® engineered couplings are experienced engineering staff focused on providing
Pulp & Paper • •
designed, manufactured, sold and serviced woldwide, solutions for our customers´ requirements.
Petrochemical / Oil & Gas • • • • • • with service provided from specification right through
to installation. A dedicated global sales and service team assists you to
Cooling Towers • • find the best choice and manage all your coupling needs.
Machine Tools • • All JAURE® & KOP-FLEX® facilities around the
globe are state of the art, with access to a large and
Marine • • • • • •
Wind Turbines • • •
Test Benches • • • • • •
Railway • • • •

Sensor Diaphragm Coupling

JAURE®. Zizurkil. Spain. Pune, India. Nove Mesto, Slovakia. Zhangzhou, China.

Display
Conditioning Unit Unit

Powerlign® Torque Monitoring. High Performance Solutions.

KOP-FLEX®. Baltimore, USA. Florence, Kentucky, USA. Rexdale / Toronto, Canada. Apocadaca, México.

58 ®
Regal Beloit Spain S.A
Ernio bidea, s/n
20159 ZIZURKIL
(Gipuzkoa) SPAIN

Phone: +34 943 69 00 54

Fax: +34 943 69 02 95

www.regalbeloit.com
www.jaure.com

APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the
responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon
the use and application of such products and components. The scope of the technical and application information included in this publication is
necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially
affect the application and operating results of the products and components and the customer should carefully review its requirements. Any
technical advice or review furnished by Regal-Beloit America, Inc. and its affiliates with respect to the use of products and components is given
in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review
being given and accepted at customer’s risk.
For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer
Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or
use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.

Regal, Jaure, and Kop-Flex are trademarks of Regal-Beloit Corporation or one of its affiliated companies.
©2015 Regal-Beloit Corporation, All Rights Reserved. MCC15002E • Form# 9916