Water filters

Profine
 INDEX

Profine filter - KIT System ..................................................................................................................................... 3

Profine Filter Heads ............................................................................................................................................... 5
Profine filters - Potable Water .............................................................................................................................. 7
Profine filters - Steam Espresso Coffee ............................................................................................................ 17
Profine filter - Technological Use ...................................................................................................................... 18
Profine filter - KIT System
Code: 04400108
Profine SILVER small KIT system antimicrobial carbon block
0,5 micron water filters, head, faucet

Variants
Code Description
04400108-01 Profine SILVER small KIT system antimicrobial carbon block 0,5 micron water filters, head, faucet

SILVER is for drinking Water!

Installing Profine® kit for drinking water you ensure yourself that the water of your faucet is good everyday
of the year. The kit includes the filter head and the faucet with the LED that indicates
when replace the filter.

Profine® SILVER remove odor and taste, reduces chlorine, with micron rating 0,5. The disposable filter is
made of with carbon block technology with silver for a bacteriostatic action. Composite structure filter
suitable for the treatment of drinking water, compliant to DM 25/2012.

Remove taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction alluminum, ammonium(NH4), iron and solphate.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Profine SILVER range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Bacteriostatic
* Reduction of particulate in suspension

• Technology: Carbon Block (CB)

• Micron rating: 0,5 micron
• Service life: See table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5

10 August 2021 3/20

minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually. When the LED of the faucet turns red.

Parts Included in the system:

• Filter head • Silver small filter • Faucet with bright LED • E.Z. Feed Water Connector 1/4" - 1/2''x1/2'' •
Ball Valve with quick fitting Thread 1/4'' x quick fitting 1/4'' • 6.56 ft. of 6 mm plastic tubing • Teflon roll •
Mounting screws.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400111
Profine GOLD small KIT system antimicrobial ultrafiltration
carbon block 0,1 micron water filters, head, faucet

Variants
Code Description
04400111-01 Profine GOLD small KIT system antimicrobial ultrafiltration carbon block 0,1 micron water filters, head, faucet

Carbon block filtration with antimicrobial 0.5 micron final stage of ultrafiltration (UF) from 0.1 microns.
Absolute barrier broad spectrum against bacteria.

Profine® GOLD remove odor and taste. The disposable filter is made of with extruded carbon block
technology and silver for a bacteriostatic action with the final membrane UF Ultrafiltration can remove
99.99999% of bacteria.
Composite structure filter suitable for the treatment of drinking water, compliant to DM 25/2012.

Remove taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction alluminum, ammonium(NH4), iron and solphate.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Profine GOLD range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Bacteriostatic
* Bacteria and virus reduction
* Reduction of particulate in suspension

10 August 2021 4/20

• Technology: Multistage, Carbon Block (CB) with Ultrafiltration (UF)
• Micron rating: 0,1 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Parts Included in the system:

• Filter head • Gold small filter • Faucet with bright LED • E.Z. Feed Water Connector 1/4" - 1/2''x1/2'' •
Ball Valve with quick fitting Thread 1/4'' x quick fitting 1/4'' • 6.56 ft. of 6 mm plastic tubing • Teflon roll •
Mounting screws.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.

Profine Filter Heads

Code: 04400201
Profine S replacement single filter head 8, 10mm. - 1/4", 3/8"
quick fit. (6)

Variants
Code Description
04400201-01 Profine S replacement single filter head 8mm. quick fit. (6)
04400201-02 Profine S replacement single filter head 10mm. quick fit. (6)
04400201-03 Profine S replacement single filter head 1/4" quick fit. (6)
04400201-04 Profine S replacement single filter head 3/8" quick fit. (6)

Un design compatto, del tutto made in Italy, pensato per tutte le diverse tipologie d’utilizzo di montaggio.
Disegnata esclusivamente per le cartucce Profine.
Adatta per filtri Profine RED - BLUE - SILVER - GOLD.

Queste testate sono realizzate con due schemi diversi:

a) entrata uscita ambo lati.
b) entrata uscita stesso lato.

10 August 2021 5/20

La staffa di supporto è concepita per garantire la massima sicurezza nell’aggancio delle cartucce durante
le operazioni di sostituzione e per dare un sistema solido, stabile e senza vibrazioni.
Permette sempre una rotazione di 180° della testata sull’asse, offrendo quindi la completa orientabilità dei
raccordi IN-OUT, a destra e a sinistra, secondo le esigenze dell’impianto.
La cartuccia rapida è facile da installare e sostituire.
• Attacchi: Gli attacchi ai tubi sono ad innesto rapido da 8, 10mm. - 1/4", 3/8" quick fit.
• Portata: 2,2/7lt./min.(0,58/1,84gpm) variabile in base alla cartuccia installata.
• Dimensioni: HxLxP 145x97x107(mm.) - 5,7”x3,8"x4,2"(In.)
• Installazione: Lasciare uno spazio verticale di circa 7 cm sotto la cartuccia per consentirne la sostituzione.
Code: 04400203
Profine P parallel replacement single filter head 8, 10mm. - 1/4",
3/8" quick fit. (6)

Variants
Code Description
04400203-01 Profine P parallel replacement single filter head 8mm. quick fit. (6)
04400203-02 Profine P parallel replacement single filter head 10mm. quick fit. (6)
04400203-03 Profine P parallel replacement single filter head 1/4" quick fit. (6)
04400203-04 Profine P parallel replacement single filter head 3/8" quick fit. (6)

A compact design, completely made in Italy, designed for all different types of use to assembly.
Designed exclusively for Profine cartridges.
Suitable for Profine filters RED - BLUE - SILVER - GOLD.

The support bracket is designed to ensure maximum safety during the replacement operations and to give
a solid system, stable and without vibration.
Always allows a rotation of 180° on the axis of the filter head, thus offering the complete adjustability of the
fittings IN-OUT, left and right, according to system requirements.
The filter is easy to install and replace.
• Connections: Quick fitting connection 8, 10mm. - 1/4 ", 3/8"
• Flow rate: varies according to installed cartridge 2.2 / 7lt. / Min. (0.58 / 1,84gpm).
• Dimensions: HxLxD 145x97x107 (mm.) - 5.7 "x3,8" x4,2 "(In.)
• Installation: Leave a vertical space of about 7 cm under the cartridge to allow for its replacement.
Code: 04400202
Profine R replacement single filter head 8, 10mm. - 1/4", 3/8"
quick fit. (6)

10 August 2021 6/20

Variants
Code Description
04400202-05 Profine R replacement single filter head 1lt./min 10mm. quick fit. (6)
04400202-06 Profine R replacement single filter head 1,5lt./min 10mm. quick fit. (6)
04400202-07 Profine R replacement single filter head 2lt./min 10mm. quick fit. (6)
04400202-08 Profine R replacement single filter head 2,5lt./min 10mm. quick fit. (6)
04400202-09 Profine R replacement single filter head 1lt./min 8mm. quick fit. (6)
04400202-10 Profine R replacement single filter head 1,5lt./min 8mm. quick fit. (6)
04400202-11 Profine R replacement single filter head 2lt./min 8mm. quick fit. (6)
04400202-12 Profine R replacement single filter head 2,5lt./min 8mm. quick fit. (6)
04400202-13 Profine R replacement single filter head 1lt./min 3/8" quick fit. (6)
04400202-14 Profine R replacement single filter head 1,5lt./min 3/8" quick fit. (6)
04400202-15 Profine R replacement single filter head 2lt./min 3/8" quick fit. (6)
04400202-16 Profine R replacement single filter head 2,5lt./min 3/8" quick fit. (6)
04400202-17 Profine R replacement single filter head 1lt./min 1/4" quick fit. (6)
04400202-18 Profine R replacement single filter head 1,5lt./min 1/4" quick fit. (6)
04400202-19 Profine R replacement single filter head 2lt./min 1/4" quick fit. (6)
04400202-20 Profine R replacement single filter head 2,5lt./min 1/4" quick fit. (6)

A compact design, completely made in Italy, designed for all different types of use to assembly.
Designed exclusively for Profine cartridges.
Suitable for Profine filters ARSENIC - NITRATES - YELLOW.

The support bracket is designed to ensure maximum safety during the replacement operations and to give
a solid system, stable and without vibration.
Always allows a rotation of 180° on the axis of the filter head, thus offering the complete adjustability of the
fittings IN-OUT, left and right, according to system requirements.
The filter is easy to install and replace.
• Connections: Quick fitting connection 10mm.
• Flow rate: 1 - 1,5 - 2 - 2,5lt./min.(0,26 - 0,39 - 0,52 - 0,66gpm).
• Dimensions: HxLxD 145x97x107 (mm.) - 5.7 "x3,8" x4,2 "(In.)
• Installation: Leave a vertical space of about 7 cm under the cartridge to allow for its replacement.

Profine filters - Potable Water

Code: 04400103
Profine RED sediment 5 micron water filters

Features
Flow rate mod. Small: 0,79 gpm (3L/min)
Flow rate mod. Medium: 1,32 gpm (5L/min)
Flow rate mod. Large: 1,84 gpm (7L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Small: Until clogging max Dp 2,5 Bar (36,26 psi)
Service life mod. Medium: Until clogging max Dp 2,5 Bar (36,26 psi)
Service life mod. Large: Until clogging max Dp 2,5 Bar (36,26 psi)
Variants
Code Description
04400103-01 Profine RED small replacement filter - 3lt./min 5 micron (6)

10 August 2021 7/20

04400103-02 Profine RED medium replacement filter - 5lt./min 5 micron (6)
04400103-03 Profine RED large replacement filter - 7lt./min 5 micron (6)

Stop sediments as Dirt and Sand.

Profine® RED reduces and removes the water turbidity and suspended material with micro rating 5. The
disposable filter is made with extruded polypropylene technology, compliant to DM 25/2012.

Removes dirt, rust, suspended material not visible to the naked eye.

* Ideal for home appliances, technological systems as prefiltration for reverse osmosis and multiple
applications of Profine filters.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Features:
* Reduction of particulate in suspension

• Technology: Extruded polypropylene (PP)

• Micron rating: 5 micron
• Service life: Until clogging max Dp 2,5 Bar (36,26 psi)
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400101
Profine BLUE carbon block 5 micron water filters

Features
Flow rate mod. Small: 0,79 gpm (3L/min)

10 August 2021 8/20

 Flow rate mod. Medium: 1,32 gpm (5L/min)
Flow rate mod. Large: 1,84 gpm (7L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Small: 3.960 gallons (15.000L) max. 1 year
Service life mod. Medium: 6.336 gallons (24.000L) max. 1 year
Service life mod. Large: 11.880 gallons (45.000L) max. 1 year
Variants
Code Description
04400101-01 Profine BLUE small replacement filter 15.000lt. - 3lt./min 5 micron (6)
04400101-02 Profine BLUE medium replacement filter 24.000lt. - 5lt./min 5 micron (6)
04400101-03 Profine BLUE large replacement filter 45.000lt. - 7lt./min 5 micron (6)

Profine® BLUE remove odor and unwanted taste, reduces chlorine, nominal micron rating 5. The cartridge
with quick connection is of the disposable type and is made with extruded carbon block technology.
Composite structure filter suitable for drinking water treatment, compliant to DM 25/2012.

Remove taste and odor, chlorine, dirt, rust, suspended sediment not visible to the naked eye, mold and
algae.

* Ideal for appliances, technological systems as prefiltration for reverse osmosis and multiple applications of
Profine filters.
* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation, indifferent.
* The filter is easy to install and replace without use of special tools.

Features:
* Chlorine reduction
* Reduction of particulate in suspension

• Technology: Carbon Block (CB)

• Micron rating: 5 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.

10 August 2021 9/20

Code: 04400102
Profine SILVER antimicrobial carbon block 0,5 micron water
filters

Features
Flow rate mod. Mini: 0,58 gpm (2,2L/min)
Flow rate mod. Small: 0,79 gpm (3L/min)
Flow rate mod. Medium: 1,32 gpm (5L/min)
Flow rate mod. Large: 1,84 gpm (7L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Mini: 1.848 gallons (7.000L) max. 1 year
Service life mod. Small: 2.640 gallons (10.000L) max. 1 year
Service life mod. Medium: 4.092 gallons (15.500L) max. 1 year
Service life mod. Large: 11.880 gallons (45.000L) max. 1 year
Variants
Code Description
04400102-04 Profine SILVER mini antimicrobial replacement filter 7.000lt. - 2,2lt./min 0,5 micron (6)
04400102-01 Profine SILVER small antimicrobial replacement filter 10.000lt. - 3lt./min 0,5 micron (6)
04400102-02 Profine SILVER medium antimicrobial replacement filter 15.500lt. - 5lt./min 0,5 micron (6)
04400102-03 Profine SILVER large antimicrobial replacement filter 45.000lt. - 7lt./min 0,5 micron (6)

SILVER is for drinking Water!

It is a fine filtration system for Water used in food.

Profine® SILVER remove odor and taste, reduces chlorine, with micron rating 0,5. The disposable filter is
made of with carbon block technology with silver for a bacteriostatic action.
Composite structure filter suitable for the treatment of drinking water, compliant to DM 25/2012.

Remove taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction alluminum, ammonium(NH4), iron and solphate.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Profine SILVER range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Bacteriostatic
* Reduction of particulate in suspension

• Technology: Carbon Block (CB)

• Micron rating: 0,5 micron
• Service life: depending to the model, see table.

10 August 2021 10/20

** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) MINI 216,5x87,4(mm.) - 8,52”x3,44"(In.)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400104
Profine UF GOLD antimicrobial ultrafiltration carbon block 0,1
micron water filters

Features
Flow rate mod. Small: 0,79 gpm (3L/min)
Flow rate mod. Medium: 1,32 gpm (5L/min)
Flow rate mod. Large: 1,84 gpm (7L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Small: 2.640 gallons (10.000L) max. 1 year
Service life mod. Medium: 4.092 gallons (15.500L) max. 1 year
Service life mod. Large: 5.808 gallons (22.000L) max. 1 year
Variants
Code Description
04400104-01 Profine UF GOLD small antimicrobial replacement filter 10.000lt. - 3lt./min 0,1 micron (6)
04400104-02 Profine UF GOLD medium antimicrobial replacement filter 15.500lt. - 5lt./min 0,1 micron (6)
04400104-03 Profine UF GOLD large antimicrobial replacement filter 22.000lt. - 7lt./min 0,1 micron (6)

Carbon block filtration with antimicrobial 0.5 micron final stage of ultrafiltration (UF) from 0.1 microns.
Absolute barrier broad spectrum against bacteria.

Profine® GOLD remove odor and taste. The disposable filter is made of with extruded carbon block
technology and silver for a bacteriostatic action with the final membrane UF Ultrafiltration can remove
99.99999% of bacteria.
Composite structure filter suitable for the treatment of drinking water, compliant to DM 25/2012.

10 August 2021 11/20

Remove taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction alluminum, ammonium(NH4), iron and solphate.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical or horizontal installation.
* The filter is easy to install and replace without use of special tools.

Profine GOLD range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Bacteriostatic
* Bacteria and virus reduction
* Reduction of particulate in suspension

• Technology: Multistage, Carbon Block (CB) with Ultrafiltration (UF)

• Micron rating: 0,1 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400105
Profine ARSENIC antimicrobial carbon block 0,5 micron water
filters

Features
Flow rate mod. Small: 0,26 gpm (1L/min)

10 August 2021 12/20

 Flow rate mod. Medium: 0,39 gpm (1,5L/min)
Flow rate mod. Large: 0,53 gpm (2L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Small: 2.376 gallons (9.000L) max. 1 year
Service life mod. Medium: 3.564 gallons (13.500L) max. 1 year
Service life mod. Large: 5.280 gallons (20.000L) max. 1 year
Variants
Code Description
04400105-01 Profine ARSENIC small antimicrobial replacement filter 9.000lt. - 1lt./min 0,5 micron (6)
04400105-02 Profine ARSENIC medium antimicrobial replacement filter 13.500lt. - 1,5lt./min 0,5 micron (6)
04400105-03 Profine ARSENIC large antimicrobial replacement filter 20.000lt. - 2lt./min 0,5 micron (6)

Reduces concentration of arsenic in drinking water. Carbon block filtration with antimicrobial 0.5 micron and
selective resin for arsenic, mixed with active carbon.
Profine® ARSENIC remove odor and taste. The disposable filter is made of with extruded carbon block
technology and silver for a bacteriostatic action.

Removes taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction arsenic (type "III" trivalent and "V" pentavalent) if higher than to the limits of potability.
Composite structure filter suitable for the treatment of drinking water. Resin compliant to the NSF 61 and
WRAS standards, the remaining components in contact with water compliant to DM 174/2004.
For drinking water with arsenic concentration 10 µg/l.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation with filter head "R" type.
* The filter is easy to install and replace without use of special tools.

Profine ARSENIC range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Arsenic reduction
* Bacteriostatic
* Reduction of particulate in suspension

• Technology: Multistage, Carbon Block (CB)

• Micron rating: 0,5 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer

10 August 2021 13/20

instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400106
Profine NITRATES antimicrobial carbon block 0,5 micron water
filters

Features
Flow rate mod. Small: 0,26 gpm (1L/min)
Flow rate mod. Medium: 0,39 gpm (1,5L/min)
Flow rate mod. Large: 0,58 gpm (2,2L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Service life mod. Small: 237,6 gallons (900L) max. 1 year
Service life mod. Medium: 369,6 gallons (1.400L) max. 1 year
Service life mod. Large: 554,4 gallons (2.100L) max. 1 year
Variants
Code Description
04400106-01 Profine NITRATES small antimicrobial replacement filter 900lt. - 1lt./min 0,5 micron (6)
04400106-02 Profine NITRATES medium antimicrobial replacement filter 1.400lt. - 1,5lt./min 0,5 micron (6)
04400106-03 Profine NITRATES large antimicrobial replacement filter 2.100lt. - 2,2lt./min 0,5 micron (6)

Reduces concentration of nitrates in drinking water. Carbon block filtration, antimicrobial 0.5 micron with
selective resin for nitrates, mixed with active carbon.
Profine® NITRATES remove odor and taste. The disposable filter is made of with extruded carbon block
technology and silver for a bacteriostatic action.

Removes taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Nitrates reduction with strong anionic macroporous resin, for drinking water with a concentration of
nitrates max 50 mg/l.

* Ideal for drinking and cooking in maximum safety.

* Improve taste of beverages, sparkling water and post-mix systems.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation with filter head "R" type.
* The filter is easy to install and replace without use of special tools.

Profine NITRATES range with antimicrobial protection inhibits any potential bacterial growth.

Features:
* Chlorine reduction
* Nitrates reduction
* Bacteriostatic
* Reduction of particulate in suspension

• Technology: Multistage, Carbon Block (CB)

• Micron rating: 0,5 micron

10 August 2021 14/20

• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400110
Profine OCRA strong cation resin ho.re.ca water filters

Features
Flow rate mod. Small: 0,34 gpm (1,3L/min)
Flow rate mod. Medium: 0,53 gpm (2L/min)
Flow rate mod. Large: 0,66 gpm (2,5L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Variants
Code Description
04400110-01 Profine OCRA Small water filter - 1,3lt./min. (6)
04400110-02 Profine OCRA Medium water filter - 2lt./min. (6)
04400110-03 Profine OCRA Large water filter - 2,5lt./min. 0,5 (6)

Profine® OCRA is quick-connect cartridge with strong gel cation softening resin. Filter for softening drinking
water, with fixed residual hardness mixing (approx. 25%), for beverage dispensers or similar equipment.
If the cartridge is used in food application equipment, the whole system must comply the EU regulation
178/2002.

Reduces the temporary hardness of water and removes completely scales due to limestone deposits.

* Ideal for hotels, restaurants facilities, Ho.Re.Ca. and multiple applications of Profine filters.
* Improves taste of beverages, sparkling water and post-mix systems.
* Protects your implants and removes completely scales due to limestone deposits.

10 August 2021 15/20

* No electrical connection required.
* Vertical installation.
* The filter is easy to install and to replaces without using any special tool.

Features:
* Temporary reduction of water hardness
* Removes completely scales due to limestone deposits

• Technology: strong cation resin

• Micron rating: -
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400112
Profine UNO Residential microfiltration

Variants
Code Description
04400112-01 Profine UNO italian microfiltration complete system
04400112-03 Replacement filter UNO microfiltration

Profine UNO Residential microfiltration

Inside the sleek body, the silver-impregnated carbon block guarantees 0.5 microfiltration for up to
7.000 litres of clean, fresh, refined water. UNO is an antibacterial system, enhanced by the guaranteed
bacteriostatic action of the impregnated silver ions.
Can be mounted vertically or horizontally.

- Removes suspended material, bad smells and taste, chlorine, any herbicides, pesticides and

10 August 2021 16/20

microplastics;
- 0,5 µm microfiltration;
- Bacteriostatic action;
- Easy installation;
- Cartridge check LED.

Features:
Operating range: 3,5 lt./min.
Operating pressure: 1,5bar
Temperature: Min. 5°C - Max. 38°C
Capacity: 7.000lt.

Cartridge replacement no later than 12 months from the date of installation.

Replace the LED indicator battery every time you replace the cartridge.

Profine filters - Steam Espresso Coffee

Code: 04400109
Profine VIOLET ion exchange resin ho.re.ca and coffee water
filters

Features
Flow rate mod. Small: 0,34 gpm (1,3L/min)
Flow rate mod. Medium: 0,53 gpm (2L/min)
Flow rate mod. Large: 0,66 gpm (2,5L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Variants
Code Description
04400109-01 Profine VIOLET Small water filter - 1,3lt./min. 0,5 micron (6)
04400109-02 Profine VIOLET Medium water filter - 2lt./min. 0,5 micron (6)
04400109-03 Profine VIOLET Large water filter - 2,5lt./min. 0,5 micron (6)

Profine® VIOLET designed to reduce the temporary hardness of drinking water. Quick-connect cartridge
with carboxylic weak cation resin mixed with granular carbon, featuring final carbon block stage with silver
ions. If the cartridge is used in food processing equipment, the whole system must comply with the EU
regulation 178/2002

Reduces the temporary hardness of water and removes completely scales due to limestone deposits.

* Ideal for hotels, restaurants facilities, Ho.Re.Ca., Coffee Machines and multiple applications of Profine
filters.
* Improves taste of beverages, sparkling water and post-mix systems.
* Protects your implants and removes completely scales due to limestone deposits.
* No electrical connection required.
* Vertical installation.
* The filter is easy to install and to replaces without using any special tool.

Features:

10 August 2021 17/20

* Temporary reduction of water hardness
* Removes completely scales due to limestone deposits

• Technology: carboxylic weak cation resin mixed with granular carbon, featuring final carbon block stage
with silver ions
• Micron rating: 0,5 micron
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.

Profine filter - Technological Use

Code: 04400107
Profine YELLOW demineralization water filters

Features
Flow rate mod. Small: 0,26 gpm (1L/min)
Flow rate mod. Medium: 0,39 gpm (1,5L/min)
Flow rate mod. Large: 0,53 gpm (2L/min)
Working pressure: 8,7 - 87 psi (0,6 - 6 bar)
Temperature Rating: 40 - 100°F (4,4 - 37,8°C)
Variants
Code Description
04400107-01 Profine YELLOW small demineralization water filter
04400107-02 Profine YELLOW medium demineralization water filter
04400107-03 Profine YELLOW large demineralization water filter

Demineralizes drinking water, only to technological use. For non drinkable water
Removes the total concentration of mineral salts in the water, mesh filter with mixed bed resin, cationic and

10 August 2021 18/20

anionic.

* Ideal for water at technological use

* Laser cut.
* Analysis laboratories.
* Battery charging forklifts.
* Small boilers and closed circuits.
* Steam generators.
* Protect from clogging, corrosion and wear.
* No electrical connection required.
* Vertical installation with filter head "R" type.
* The filter is easy to install and replace without use of special tools.

Profine YELLOW range is not for drinking use

Features:
* Total water demineralization

• Technology: Multistage, mesh filter with mixed bed resin

• Micron rating: None
• Service life: depending to the model, see table.
** Capacity varies according to:
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)

• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)

• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.

10 August 2021 19/20

Powered by TCPDF (www.tcpdf.org)