OXYTOME 2
PLASMATOME 2
Automatised thermal cutting
machine, high-performance,
robust, versatile.
OXYTOME 2 / PLASMATOME 2
Lincoln Electric has always wanted to offer its customers the best thermal cutting machinesfor
oxycutting and / or plasma processes. Having identified that they pay particular attention to the
following key factors: Robust, flexible, cost-effective machine that is quick and easy to install,
produces excellent cutting quality, safe and low cost of ownership Lincoln Electric has therefore
developed OXYTOME 2 and PLASMATOME 2 to complete its range of cutting machines.
HPC digital process 2 and Advanced console
The most intuitive and efficient digital control on the market.
It fully manages the cutting machine: from the trajectory to the processes.
The ergonomics of the HMI and its large 19” touch screen make it a user-friendly
and easy-to-use tool.
The Advanced swivel console is equipped with a joystick, ergonomic manual
controls and a maintenance mode to simplify the use of the machine.
Depending on the configuration, the Advanced console can be positioned to
the left or right of the machine.
Hardware and Communication:
■ EtherCAT bus management.
■ Industrial computer.
■ SSD hard drive.
■ Real time system.
■ USB, NETWORK and
TELESERVICE.
Main characteristics:
Size 15 to 45
Cutting width
(1 500 to 4 500 mm)
• Base 3 000 mm
• Optional extension with
Cutting length
1 500 or 3 000 mm element Machine base
• 32 m Max
Speed 15 m/min The beam is mounted on two
Repositioning
large bed bases giving the machine
0,1 mm a great stability and rigidity.
accuracy
Each bed base is equipped with a
Total of 6 tools:
Number of tools • up to 6 oxy torches permanent rail brushing system.
• up to 2 plasma All contribute to fluidizing machine
Motorisations Brushless EtherCAT 750W movements for optimum cutting.
with absolute encoders
Transverse guiding
The beam is equipped with
Drive units
a double ball-bearing rail to of the machine
smooth machine movements and
thus optimize cutting quality. The Geared motors with 750W
driving is carried out thanks to a brushless absolute encoders
with low backlash and
rack oriented opposite side of the
maintenance-free equipped
process for an optimal protection. with 30-tooth gear wheels with quick-change
system.
The assembly is driven by the latest generation
of communication speed variator EtherCAT and
guarantees a fluidity of movement to achieve high
levels of cutting quality.
With absolute encoder technology, the machine
is ready to produce as soon as it is turned on, and
production restart in the event of incidents or
power failures are simplified.
Safety and compliance
Safety devices (photoelectric cells and emergency
stop buttons) ensuring optimum protection for
the operator.
The machine meets the current machine directive
2006/42/EC.
It is also interconnected to its environment:
process and treatment of cutting fumes.
Intervention mode provides easy access to
cutting tools.
Longitudinal rails
The longitudinal guide consists of robust rails and racks oriented
opposite side of the process for better protection.
Modular, robust and practical to mount even on imperfect floors.
Dimensions
A : Distance between rails.
B : Overall width.
C : Overall dimensions with 2 corridors of 800 mm.
D : Stroke of the 1st tool holder without additional torch holder.
E : Sheet width.
Machine A B C D* E**
T 15 2 015 mm 3 500 mm 5 100 mm 2 065 mm 1 500 mm
T 20 2 515 mm 4 000 mm 5 600 mm 2 565 mm 2 000 mm
* Transverse stroke with 1 tool holder.
T 25 3 015 mm 4 500 mm 6 100 mm 3 065 mm 2 500 mm For several tool holders: remove 185mm for the 1st additional
T 30 3 515 mm 5 000 mm 6 600 mm 3 565 mm 3 000 mm tool holder and 165mm for the following ones.
T 35 4 015 mm 5 500 mm 7 100 mm 4 065 mm 3 500 mm ** As a general rule, tables with pneumatic activators allow to
T 40 4 515 mm 6 000 mm 7 600 mm 4 565 mm 4 000 mm cut on the width of sheet indicated.
It is important to check beforehand the compatibility of the
T 45 5 015 mm 6 500 mm 8 100 mm 5 065 mm 4 500 mm table with machine width.
Mains options
Tube cutting, automatic indexing up to 6 torches, 2nd numerised transversal axis, automatic
lubricators, cutting table lighting, positioning laser, air conditioning, air cooling, micro-percussion
marker (Sic), pneumatic or micro-vibration marker (Wen), thermal protections, Visio Process,
Teleservice, aerial chains, pneumatic drill unit, electric clamping…
OXYTOME 2 / PLASMATOME 2
Equipement
for thermal cutting
Equipement for plasma process
FLEXCUT 125 CE
Cutting and marking air Plasma
FLEXCUT 125 CE 125 A @ 100% - Cutting and marking
installation with inverter
Performances: Steel 30 mm / 45 mm
technology. The torche LC125
Mid plate / Stainless steel 20 mm / 40 mm
allows to increase speed and Plate edge Aluminium 20 mm / 40 mm
quality of cut as well as the
lifetime of the components Numerical torch holder THD 160 mm, 2 m/min
Plasma Bi-torches Yes
NERTAJET HPi
High precision Plasma cutting and 160 ou 350 mm,
marking system multiplying the benefits Numerical torch holder THDi
15 m/min
and savings thanks to its advanced Plasma Bi-torches Yes
features: Dry cut CPM400
■ CYCLE BOOST and INSTANT MARKING High power cut with dry process or
CPM Wi
to reduce production time. water vortex**
■ MASTER HOLE and CDHC to increase Torch tilting following X* Yes
cutting quality. Torch tilting following X and Y* Yes
NERTAJET HPi A 150 A @ 100% 300 A @ 100% 450 A @ 100% 600 A @ 100%
Performances: Steel 25 mm / 40 mm 35 mm / 70 mm 50 mm / 100 mm 50 mm / 100 mm
Mid plate / Stainless steel 25 mm / 40 mm 40 mm / 60 mm 55 mm / 80 mm 110 mm/ 150 mm
Plate edge Aluminium 20 mm / 40 mm 35 mm / 60 mm 45 mm / 70 mm 80 mm/ 120 mm
* With CPM400 and bevelling consumables
**Water vortex: possibility of cutting with submerged torch or on water
Equipement for oxyfuel process
OXY Essential OXY HPi 2
MACH HP and MACH HPi
Number of torches 4 6
■ 6 to 300 mm. Gas regulation Automatic Automatic
■ 150mm mid plate. Maximum thickness (mm) / Piercing (mm) 200 / 150 300 / 150
■ Tool-free nozzle 150 mm stroke Yes Yes
assembly: simple 250 mm stroke - Yes
and fast. Tool holders
Cable chain - Yes
■ Lifetime. Speed 2 m/min 6 m/min
■ Productivity. MACH HP Yes Yes
Oxy torches
■ Quality of cut. MACH HPi Yes Yes
■ MACH HPi offers Fixed electric ignitor* Option -
integrated ignition and OXY SAFE PIERCING
With integrated choc sensor (igniter* and retractable probe)
Option Included
visualization of cutting
pressure for ease of use Bevelling tool with tilting nozzle** Yes Yes * Integrated ignitor if
MACH HPi
and long life. Strip cutting tool** Yes Yes
** Use without capacitive
VXK cutting tool 1 2 probe and ignitor
BEING PRESENT LOCALLY
MAKES US MORE AWARE GLOBALLY
Benefit from the Market Leader
EUROPE/AFRICA/ME
13 Countries
NORTH AMERICA 26 Facilities
22 Facilities 14 Solution Centers
16 Solution Centers ASIA PACIFIC
4 Countries
9 Facilities
5 Solution Centers
SOUTH AMERICA
3 Countries
6 Facilities
Global Headquarters 7 Solution Centers
Cleveland, Ohio USA
2.6 160 11 000 120
BILLION USD REVENUE ACTIVE IN 160
COUNTRIES
WORLDWIDE
EMPLOYEES WORLDWIDE YEARS OF EXPERIENCE
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries
to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a
position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express
or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
www.lincolnelectriceurope.com
