JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.

Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard

36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 1/6

MICROSTAT-M
■ Electromechanical temperature controller with indication
■ Class 2 with one microswitch
■ IP53 front protection
■ Housing sizes: 60 mm, 80 mm and 100 mm dia.
Bezel sizes: 72 x 72 mm and 96 x 96 mm

Brief description
The MICROSTAT-M is an electromechanical temperature controller with indication for universal
use. The instrument has a plastic housing and a liquid-filled or gas-filled measuring system. Type 608501/2160
The temperature-dependent change in volume of a liquid-filled measuring system, or the
temperature-dependent change in pressure of a gas-filled system, is converted by a Bourdon
tube into a rotary movement of the pointer, without any transmission gearing. The rotary
movement of the pointer spindle operates the microswitch through a lever system.

Type 608501/2572
Technical data
Housing or bezel black plastic;
steel housing (extra code 415)
Protection front: IP53 to EN 60 529
rear: IP00 to EN 60 529 (IP54 with extra code 426)
Scale white, black lettering
Accuracy class Class 2 to EN 13190
Measuring system liquid-filled gas-filled
indication range ≤ 350°C indication range ≥ 400°C
Time constant approx. 12 sec, measured in water bath, approx. 4 sec, measured in oil bath,
t0.632 with a 6 mm dia. copper probe with a 10 mm dia. stainless steel probe
Ambient temperature
error effect in % of indication range (referred to the deviation from the reference value +23°C)
on housing 0.15% of indication range 0.05% of indication range
per °C change in ambient temperature per °C change in ambient temperature
on capillary (per meter) 0.03% of indication range no effect
per °C change in ambient temperature
higher ambient temperature – higher temperature indication – lower switching point

standard extra code (TZ) 651 extra code (TZ) 650

Electrical contact
single-pole microswitch with a mechanically operated changeover contact
Contact type
230 V AC +10/-15%, 48 — 63 Hz, p.f. = 1 (0.6)
Contact rating
5 (1.5) A 3 (1) A 10 (3) A
Switching differential approx. 2% of indication range 2 to 4% of indication range
Switching point accuracy ± 0.5% of indication range referred to the switch-off point with rising temperature
Switching reliability To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a
minimum current of 20 mA.
standard extra code (TZ) 507
Electrical connection faston connectors A 6.3 x 0.8 to DIN 46 244 screw terminals: for up to 1.5 mm2
conductor cross-section
Setpoint adjustment by setting device on window
Limit temperatures for transport and storage: -20 to +70°C
(for indication range -40 to +40°C: up to 50°C; for indication range -30 to +50°C: up to 60°C)
Nominal position unrestricted

2009-05-04/00073301
JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.
Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard
36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 2/6

Dimensions
Types: 608501/2160
608501/2160 TZ 415
Width of mounting bracket

+0.5
Panel cut-out Ø 62 mm
0

Types: 608501/2572
608501/2572 TZ 415
Width of mounting bracket

+0.5
Panel cut-out Ø 62 0 mm

Types: 608501/2180
608501/2180 TZ 415
Width of mounting bracket

Panel cut-out Ø 82 +0.5 mm

0
TZ 572 (indicator light), only
Types: 608501/2596 with
608501/2596 TZ 415 92 x 92 +0.8 mm panel cut-out
Width of mounting bracket

+0.5 +0.8
Panel cut-out Ø 82 mm or 92 x 92 mm (TZ 460)
0 0
2009-05-04/00073301
JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.
Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard
36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 3/6

Dimensions
Types: 608501/2110 Width of mounting bracket
608501/2110 TZ 415

+0.5
Panel cut-out Ø 102 mm
0
60
Types: 608501/2060
608501/2060 TZ 415 11(14) *
608501/2080 TZ 415
608501/2010 TZ 415 17 8
D5
0°
12
3x

Ø D4
Ø D1
ØD

D3

Type ØD Ø D1 Ø D3 Ø D4 Ø D5 Panel cut-out

(mm) Ø +0.5 mm
0
608501/2060
608501/2060 TZ 415 60 66 75 85 3.6 62

608501/2080 TZ 415 80 86 95 110 4.8 82

608501/2010 TZ 415 100 107 116 132 4.8 102

Extra code 426

Extra code TZ 426

* for steel housing (extra code TZ 415)

2009-05-04/00073301
JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.
Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard
36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 4/6

Order details
MICROSTAT-M Type 608501
Order code (1) Basic type
608501 Mechanical temperature controller MICROSTAT-M Class 2, with one microswitch

(2) Basic type extensions

2060 Style: 20; housing size: 060 mm dia.

2080 Style: 20; housing size: 080 mm dia. (with TZ 415 only)
2010 Style: 20; housing size: 100 mm dia. (with TZ 415 only)

2160 Style: 21; housing size: 060 mm dia.

2180 Style: 21; housing size: 080 mm dia.
2110 Style: 21; housing size: 100 mm dia. (with TZ 415 only)

2572 Style: 25; housing size: 72 x 72 mm

2596 Style: 25; housing size: 96 x 96 mm

(3) Indication range (AB)

469 -40 to +040°C; measuring range 0–30 to +030°C, accuracy 02.0°C
566 -30 to +050°C; measuring range 0–20 to +040°C, accuracy 02.0°C
643 -20 to +120°C; measuring range 0–30 to +100°C, accuracy 04.0°C
807 -00 to +060°C; measuring range 0+10 to +050°C, accuracy 02.0°C
810 -00 to +080°C; measuring range 0+10 to +070°C, accuracy 02.0°C
814 -00 to +100°C; measuring range 0+10 to +090°C, accuracy 02.0°C
818 -00 to +120°C; measuring range 0+20 to +100°C, accuracy 04.0°C
826 -00 to +160°C; measuring range 0+20 to +140°C, accuracy 04.0°C
832 -00 to +200°C; measuring range 0+20 to +180°C, accuracy 04.0°C
834 -00 to +250°C; measuring range 0+30 to +220°C, accuracy 05.0°C
926 +50 to +250°C; measuring range 0+70 to +230°C, accuracy 04.0°C
840 -00 to +300°C; measuring range 0+30 to +270°C, accuracy 10.0°C
927 +50 to +300°C; measuring range 0+80 to +270°C, accuracy 05.0°C
843 -00 to +350°C; measuring range 0+50 to +300°C, accuracy 10.0°C
932 +50 to +350°C; measuring range 0+80 to +320°C, accuracy 10.0°C
848 -00 to +400°C; measuring range 0+50 to +350°C, accuracy 10.0°C
851 -00 to +450°C; measuring range 0+50 to +400°C, accuracy 10.0°C
854 -00 to +500°C; measuring range 0+50 to +450°C, accuracy 10.0°C
858 -00 to +600°C; measuring range +100 to +500°C, accuracy 15.0°C
(4) Capillary type (FL)1
02 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300°C top of indication range)
11 FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120°C top of indication range)
17 FL17 stainless steel capillary, 1.5 mm dia.
21 FL21 copper capillary, 1.0 mm dia. (up to +300°C top of indication range)

(5) Capillary length1

1000 1000 mm
2000 2000 mm
3000 3000 mm
4000 4000 mm
5000 5000 mm
.... special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)

2009-05-04/00073301
JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.
Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard
36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 5/6

Order details
MICROSTAT-M Type 608501
Order code
(6) Process connection (PA)1
750 TF 01; temperature probe with stepped support tube

752 TF 11; temperature probe without support tube

843 TA 02; immersion tube with union nut and loose nipple2

161 TA 03; immersion tube with loose union nut

847 TA 06; sliding clamp fitting on support tube2

311 TA 20; immersion tube with loose nipple and shoulder2

872 TA 21; immersion tube with loose plug and conical seal

873 TA 22; immersion tube with loose plug, conical seal and loose nipple2

401 TA 23; immersion tube with plug and spring clip

913 SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2

820 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw
SH 09; (not with FL21 - welding shoulder with steel 1.4515)

876 SH10; screw-in pocket, assembled2

871 SH11; screw-in pocket, assembled2

(7) Diameter of process connection (PA)1

6 06 mm dia.
8 08 mm dia.
10 10 mm dia.
11 11 mm dia.
12 12 mm dia.

(8) Thread for process connection (PA)1

000 no thread (with TF 01 and TF 11)
103 G3/8 thread
104 G1/2 thread
105 G3/4 thread
114 M 10 x 1 thread (with TA 23 and SH 11 only)

(9) Material of probe / support tube1

26 stainless steel (CrNi, 1.4571)
96 copper (Cu) / brass (CuZn) (up to 200°C)
95 stainless steel (CrNi, 1.4571) - probe / brass (CuZn) - support tube (from 250°C)

(10) Material of process connection (PA)1

00 none (TF01 and TF11 only)
01 steel (St)
26 stainless steel (CrNi, 1.4571)
46 brass (CuZn)

2009-05-04/00073301
JUMO GmbH & Co. KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc.
Delivery address:Mackenrodtstraße 14, JUMO House 8 Technology Boulevard
36039 Fulda, Germany Temple Bank, Riverway Canastota, NY 13032, USA
Postal address: 36035 Fulda, Germany Harlow, Essex CM 20 2TT, UK Phone: 315-697-JUMO
Phone: +49 661 6003-0 Phone: +44 1279 635533 1-800-554-JUMO
Fax: +49 661 6003-607 Fax: +44 1279 635262 Fax: 315-697-5867
e-mail: mail@jumo.net e-mail: sales@jumo.co.uk e-mail: info@jumo.us
Internet: www.jumo.net Internet: www.jumo.co.uk Internet: www.jumo.us

Data Sheet 60.8501 Page 6/6

Order details
MICROSTAT-M Type 608501
Order code
(11) Fitting length of process connection (PA)1 (dimension EL or S)
0 minimum fitting length TF 11 (active probe dimension)
50 050 mm
100 100 mm
150 150 mm
200 200 mm
... special length (specify in plain text, in 50 mm steps)

(12) Switching output (SA)

20 SA 20 one contact 2 4

1 N 2 4
PE L1 N
Connection diagram, standard Connection diagram,
with indicator light (TZ 572)
(13) Extra codes (TZ)
000 no extra code
507 Electrical connection by screw terminals for cable up to 1.5 mm2 conductor cross-section
426 Plastic cover to protect the tab connectors or screw terminals
against touching and splashing water, IP54, with cable gland, suitable for 6 — 8 mm cable dia.
650 Microswitch 10 (3) A ( 230 V AC/DC +10/-15%, 48 — 63 Hz, p.f. = 1 (0.6)) (not with TZ 577)
410 Metal front bezel or flange ring, black
(not with basic type extensions 2080 and 2180)
411 Metal front bezel or flange ring
(not with basic type extensions 2080 and 2180)
572 Indicator light (only with types: 608501/2572 TZ 460, 415 and 608501/2596 TZ 460, 415)
510 Stop for upper or lower limit of setpoint adjustment, factory-set
460 Housing centered for panel cut-out
68 x 68 mm and 92 x 92 mm (with basic type extensions 2572 and 2596 only)
415 Steel housing with metal bezel or flange
315 Capillary reinforcement on housing and probe (not with FL21)
477 Setpoint adjustment protected by screw cap.
Adjustment with tool (only in case size 60 mm diameter in plastic housing).
577 Protection against capillary break (not with TZ 650, 651)
520 Switching point fixed in the factory.
522 Customized scale
482 Knob 22 x 10 mm dia.
743 Class 1.5

Special versions on request!

Order code
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
608501 / .... - ... - .. - .... - ... - .. - ... - .. - .. - ... - .. / ... , ...

Order example
608501 / 2160 - 818 - 21 - 2000 - 750 - 8 - 000 - 96 - 00 - 100 - 20 / 0003
1
See Data Sheet 60.8730 for description and features.
2 Screw-in spigot to DIN 3852 Form A.
3
List extra codes in sequence, separated by commas.
2009-05-04/00073301