USER RESET– Microprocessor Initialization for “In Command X” & “S” Series
NOTE: All user settings will be lost after the set is initialized.
Reset Type Model Button A Button B Button C Procedure
AVR-X7200W
AVR-X6300H
AVR-X6200W
AVR-X5200W
BACK INFO POWER
AVR-X4300H
With the power off (Zones off), press and hold
AVR-X4200W
buttons "A“ and "B" at the same time and
AVR-X4100W
while pressing these 2 buttons, press the
AVR-X4000W
power button (C) until “INITIALIZED” is
AVR-X3300W
displayed.
AVR-X3200W
AVR-X3100W
USER RESET AVR-X3000W
Initialization Mode AVR-X2300W
AVR-X2200W
For X & S Series AVR-X2100W
Models AVR-X2000W
AVR-X1300W
TUNER PRESET CH- TUNER PRESET CH+ POWER
AVR-X1200W
AVR-X1100W
Click Here For CI, AVR-X1000W
With the power off (Zones off), press and hold
buttons "A“ and "B" at the same time and
Core & E series AVR-S920W
AVR-S910W
while pressing these 2 buttons, press the
USER (MICRO) RESET power button (C) until the display flashes at 1-
AVR-S900W
second intervals.
AVR-S720W
AVR-S710W
AVR-S700W
AVR-S510BT
SOUND MODE TUNER PRESET CH + POWER
AVR-S500BT
USER RESET FACTORY RESET FACTORY RESET 1
NETWORK RESET Model Info
CI, CORE, E Series CI, CORE, E Series X and S Series
USER RESET– Microprocessor Initialization for “CI”, “CORE & “E” Series
NOTE: All user settings will be lost after the set is initialized.
Reset Type Model Button A Button B Button C Procedure
AVR-4810CI STANDARD DSP SIMULATION POWER
AVR-4520CI BACK INFO POWER
AVR-4311CI STANDARD DSP SIMULATION POWER
AVR-3313CI BACK INFO POWER
AVR-3312CI PRESET CHANNEL 2 PRESET CHANNEL 3 POWER
AVR-3311CI STANDARD DSP SIMULATION POWER
AVR-2313CI TUNER PRESET CH- TUNER PRESET CH+ POWER
AVR-2312CI PRESET CHANNEL 2 PRESET CHANNEL 3 POWER
AVR-2311CI SURROUND MODE SURROUND MODE POWER
AVR-2113CI TUNER PRESET CH- TUNER PRESET CH+ POWER
AVR-2112CI PRESET CHANNEL 2 PRESET CHANNEL 3 POWER
USER RESET AVR-1913 SOURCE SELECT SOURCE SELECT POWER
AVR-1912 PRESET CHANNEL 2 PRESET CHANNEL 3 POWER With the power off (Zones off),
Initialization Mode
AVR-1911 SURROUND MODE SURROUND MODE POWER press and hold buttons "A“ and
For CI, CORE & E AVR-1713 SOURCE SELECT SOURCE SELECT POWER "B" at the same time and while
Series Models pressing these 2 buttons, press
AVR-1712 DOCK CONTROL DOCK CONTROL POWER
the power button (C) until the
AVR-1613 SOURCE SELECT SOURCE SELECT POWER
display flashes at 1-second
AVR-1612 iPOD SYSTEM iPOD SYSTEM POWER
intervals.
AVR-1611 SURROUND MODE SURROUND MODE POWER
Click Here For X, & S AVR-1513 SOURCE SELECT SOURCE SELECT POWER
series USER (MICRO) AVR-1312 DOCK CONTROL DOCK CONTROL POWER
RESET
AVR-991
AVR-891
SURROUND MODE SURROUND MODE POWER
AVR-791
AVR-591
AVR-E400 SOURCE SELECT SOURCE SELECT POWER
AVR-391 SURROUND MODE SURROUND MODE POWER
AVR-E300
SOURCE SELECT SOURCE SELECT POWER
AVR-E200
USER RESET FACTORY RESET FACTORY RESET 2
NETWORK RESET Model Info
X and S Series CI, CORE, E Series X and S Series
FACTORY RESET– Initialization for “In Command X” & “S” Series
NOTE: All user settings will be lost and the factory settings (Including installer setup) will be restored after the set is initialized.
Reset Type Model Button A Button B Button C Procedure
AVR-X7200W
AVR-X6300H
AVR-X6200W
AVR-X5200W
CURSOR CURSOR POWER
AVR-X4300H
AVR-X4200W
AVR-X4100W
AVR-X4000W
AVR-X3300W
AVR-X3200W
AVR-X3100W
Factory Reset AVR-X3000W
With the power off (Zones off), press and hold
Initialization Mode buttons "A“ and "B" at the same time and
AVR-X2300W
while pressing these 2 buttons, press the
For X & S Series AVR-X2200W
ZONE2 SOURCE DIMMER POWER power button (C) until the display flashes at 1-
AVR-X2100W
Models second intervals.
AVR-X2000W
AVR-X1300W
AVR-X1200W
Click Here For CI, AVR-X1100W
AVR-X1000W
Core & E series AVR-S920W
FACTORY RESET AVR-S910W
AVR-S900W
TUNER PRESET CH+ TUNE - POWER
AVR-S720W
AVR-S710W
AVR-S700W
AVR-S510BT
Factory Reset is not available on these models
AVR-S500BT
USER RESET USER RESET FACTORY RESET 3
NETWORK RESET Model Info
CI, CORE, E Series X and S Series CI, CORE, E Series
FACTORY RESET– Initialization for “CI”, “CORE” & “E” Series
NOTE: All user settings will be lost and the factory settings (Including installer setup) will be restored after the set is initialized.
Reset Type Model Button A Button B Button C Procedure
AVR-4810CI
AVR-4520CI
CURSOR CURSOR POWER
AVR-4311CI
AVR-3313CI
AVR-3312CI PRESET CHANNEL 1 PRESET CHANNEL 3 POWER
AVR-3311CI CURSOR CURSOR POWER
AVR-2313CI TUNER PRESET CH- TUNER PRESET CH+ POWER
AVR-2312CI PRESET CHANNEL 1 PRESET CHANNEL 2 POWER
AVR-2311CI NA
AVR-2113CI ZONE2/REC SOURCE DIMMER POWER
AVR-2112CI PRESET CHANNEL 1 PRESET CHANNEL 2 POWER
Factory Reset AVR-1913 ZONE2 SOURCE DIMMER POWER
Initialization Mode AVR-1912 PRESET CHANNEL 1 PRESET CHANNEL 2 POWER With the power off (Zones off), press and
AVR-1911 NA
For CI, CORE & E AVR-1713 DIMMER SOURCE SELECT POWER
hold buttons "A“ and "B" at the same time
and while pressing these 2 buttons, press the
Series Models AVR-1712 DOCK CONTROL DOCK CONTROL POWER power button (C) until the display flashes at
AVR-1613 DIMMER SOURCE SELECT POWER 1-second intervals.
AVR-1612 TUNER PRESET CH + SOURCE POWER
AVR-1611 NA
Click Here For X, & S AVR-1513 SOURCE SELECT SOURCE SELECT POWER
series FACTORY RESET AVR-1312 NA
AVR-991 CURSOR CURSOR POWER
AVR-891
AVR-791 NA
AVR-591
AVR-E400 ZONE2 SOURCE DIMMER POWER
AVR-391 NA
AVR-E300 TUNER PRESET CH + DIMMER POWER
AVR-E200 NA
USER RESET USER RESET FACTORY RESET 4
NETWORK RESET Model Info
CI, CORE, E Series X and S Series X and S Series
NETWORK RESET– Initialization Mode For “X” Series Models With Built-in HEOS
NOTE: The items listed below are initialized.
Reset Type Model Button A Button B Input Source Procedure
With the power “On” and the input source set to “Online
Network Reset Music”, press and hold the "CURSOR " and "DIMMER“
AVR-X6300H buttons for more than 3 seconds.
For X Series Models AVR-X4300H
Cursor Cursor Online Music
During initialization, the display shows “Network Reset” and
with Built-in HEOS. when done, “Completed” is displayed for 5 seconds before
returning to the normal display.
Network Initialization Mode
The following items are initialized:
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
Operations
With the power is on and the input source set to “Online Music”, press and hold the "CURSOR " and "DIMMER“ buttons for more than 3 seconds.
“Network Reset” appears on the screen followed by “Completed”, which is displayed for 5 seconds before returning to the normal display.
USER RESET USER RESET FACTORY RESET FACTORY RESET
Model Info
CI, CORE, E Series X and S Series CI, CORE, E Series X and S Series
