INNOVATION.
NOT DUPLICATION.™
LIFTING SAFETY
H-E PARTS INTERNATIONAL (H-E PARTS) SPECIALIZES IN PROVIDING WEAR MANAGEMENT SOLUTIONS. H-E PARTS
LINER DEVELOPMENT PROGRAM HAS BEEN DEVELOPED TO OPTIMISE LINER DESIGNS ON A SITE BY SITE BASIS AND
INVOLVES THE ONGOING ANALYSIS OF SITE OPERATIONAL REQUIREMENTS, MACHINE OPERATING PARAMETERS
AND WORN LINER PROFILES.
H-E Parts International (H-E Parts) prides itself on not only providing
industry benchmark crusher liners, but also the safest lifting assemblies
for quick, reliable and zero harm servicing. ZERO HARM
H-E Parts proprietary CME™ crusher liners, designed for use with H-E Parts SOME INHERENT HAZARDS IN
LockLift™ and Safe-T Lift™ mantle lifting systems, offer customers the
CHANGING CRUSHER LINERS THAT
optimal manganese steel grade for the job, while providing customers
with the safest means available to remove and replace crusher liners. HAVE LED TO FATALITIES AND
DISABILITIES INCLUDE ENTERING JAW
CME™ PRODUCT LINE CRUSHER CHAMBERS AND POORLY
WELDED LIFTING LUGS.
MNELITE
THESE HAZARDS CAN BE AVOIDED WITH
Range of 20 to 24-percent manganese steel, setting the benchmark for
high-performance, long-life wear products.
THE USE OF H-E PARTS LOCKLIFT™ AND
SAFE-T LIFT™ DEVICES.
MNPREMIUM
Mid-range 18-percent manganese steel, striking a balance between wear
life and overall cost.
MNSTANDARD
Range of 14 to 18-percent manganese steel, providing a low-cost option
for applications where wear rates are relatively low or where MTTR is not a
significant factor.
Within each product range, H-E Parts is able to provide modified grades
designed specifically to better suit individual requirements, including Super
Heavy Duty, High Toughness or Extended Life.
LOCKLIFT™
FOR CONE CRUSHER LINERS
360 degree lifting point Safety pin to ensure
H- E Parts LockLift™ range of mantle lifters are utilized with
gives consistent capacity the device is locked in
H-E Parts CME™ range of crusher liners to allow the liner
and is readily available. place during the lift.
to be lifted through the center hole of the mantle after the
head nut is removed. All styles utilize a jacking arrangement
to separate the head and mantle before lifting, to ensure Jacking bolts to
that a fully controlled lift takes place and that the lifting gear break seal between
is not overloaded by lifting the head along with the liner. mantle and head
before lifting.
H-E Parts patented LockLift™ lifting system has been
developed in response to safety issues associated with
welding lifting lugs onto crusher liners. By removing the
need to weld on lifting lugs, H-E Parts can provide customers
Lifting tabs used Risers to indicate
with a safe, cost-effective solution that also reduces mantle
to lift mantle tab locations.
change times.
from inner face.
All lifting components used in the LockLift™ system are
designed and proof load tested to Australian standards Wear indicator to assist
AS4991-2004 (Lifting Devices). checking lifting safety of worn
liners.
COMMON LOCKLIFT™ STYLES H-E Parts CME™ manganese liners
are LockLift™ ready.
H-E Parts has developed LockLifts™ to suit all brands of crusher, including Nordberg
Metso HP Series*, Raptor*, Symons*, Trio* and Fuller*. The design utilized varies
between machine models.
LockLift™ to suit LockLift™ to suit LockLift™ pad for LockLift™ to suit
breaking seal Symons* Locks in above the pouring hole.
HP Series* MP Series*
Backing can’t interfere with the
lifting process.
H-E Parts International replacement parts are compatible with the makes and/or models of the third-party
equipment described. H-E Parts International is not an authorized repair facility of these third parties and
it does not have an affiliation with any manufacturers of these third-party products. All brands, original
equipment manufacturer (OEM) part numbers or references are owned by the respective OEM entities
or their affiliates. These terms are used by H-E Parts International for identification and cross reference
purposes only and are not intended to indicate affiliation with, or approval by the OEM, of H-E Parts
International or its products. All parts are manufactured by, for and warranted by H-E Parts International
and are not manufactured by, purchased from or warranted by the OEM.
IFAP SAFETY AWARD WINNER
H-E Parts won the prestigious Skilled Safety Innovation Award at the IFAP/CGU Safe Way Awards for our innovative LockLift™
lifting device.
Assessed on a qualitative basis by a judging panel, the SKILLED Safety Innovation Award acknowledges H-E Parts strong
commitment to safety through the establishment and practice of leading safety solutions within the workplace.
LOCKLIFT
FOR GYRATORY CRUSHER LINERS
LockLift™ ring engaged High capacity
H-E Parts is able to provide the LockLift™ on bottom mantle jacking assembly
device for gyratory crushers that operate on allows liners to be
the same principles as other LockLift™ styles. removed without
The high capacity jacking system can allow cutting
liners to be removed from the mainshaft Similar lifting method
without cutting. Once the liner is freed from as seen on the design
the head the Locklift™ can be used to remove to suit an MP1000*
the liner safely without welding.
SAFE-T LIFT™
For Jaw Crusher Liners
Developed by H-E Parts, the Safe-T lift™ is
a captive lifter that locates into a specially
cast hole in the jaw. The lifter is inserted
into the jaw at 90 degrees to the axis of the
jaw, and then turned upwards to lock it into
place. All this can be done without entering
the crushing chamber. Safe-T lift™ can be
designed to allow jaws to hang at the exact
jawstock angle, making installation easier.
UNIVERSAL LIFTING DEVICE
eeps lifting point away from turning
K
moment
Ability to adjust lift to suit:
Liner type.
Liner thickness.
Angle required for
installation/removal.
Need to weld eliminated.
CERTIFICATION INNOVATION
ADDING VALUE THROUGH INNOVATION, H-E
All H-E Parts lifting devices are designed
to comply with the following Australian
PARTS REPUTATION IS WORLD CLASS.
standards: H-E PARTS LINER DEVELOPMENT PROGRAM
AS4991: Lifting Devices. GOES ABOVE AND BEYOND THE NORMAL
S3990: Mechanical Equipment –
A
INDUSTRY PRACTICE OF CONDUCTING A
Steelwork. TRIAL ON A GIVEN SET OF LINERS, AND
INSTEAD UTILIZES ALL THE AVAILABLE
AS1418.1: Cranes – General Requirements.
INFORMATION TO PROVIDE A CUSTOMIZED
SOLUTION.
HEPI02AUG18 www.h-eparts.com
