LABOUR RATES FOR COMMON SR 2018-19 for 33 kV SYSTEM

Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

1 Detailed Surveying on Turn-Key:

Reconnaissance Survey-cum-walk over Survey along with Departmental Staff to determine

the feasible route of the line on topo sheet. An alternate route if available should be
i) indicated. The route of the line is to be indicated and got approved by the competent
authority (Rates include the cost of Toposheet and Transportation)

1 a) Hilly terrain km 898 1781

2 b) Plain terrain km 873 1687
Detailed Survey, fixing anchor points and taking levels at 20 mtrs intervels, drawing route
profile on Graph paper indicating geographical features like Nalas, Rivers, Gardens, P&T
ii) Lines, Railway-crossings etc., and enroute villages furnihing Geo- coordinates of each
location with survey Nos of the lands throug which the line is passing duly covering the
corrridor proposed to be cleared.
3 a) Hilly terrain km 4445 8601
4 b) Plain terrain km 2968 5748

Fixing marking stones of size 200X200 x 1000 mm with approved marks including painting
above the ground level and Yellow Lettering and marking the direction of incoming line and
out going lines are to be clearly marked on the top with red colour. If the distance between Per
5 iii) 442 486
two anchor points is more than I km, one more directional stone is to be fixed. So also for Stone
the road crossing, railway crossing ,River crossing , HT crossing and nala crossing for all on
both the sides.

Per
Burgie details for identification for all Anchor towers with existing permanent marks like
6 iv) Anchor 400 440
poles, telephone lines, buildings, etc.,
Tower

Per
7 v) v) Conducting soil resistivity tests 766 843
Test
Clearing of bushes, tree branches of trees crops and shrubs wherever encountered for
vi) detailed survey to enroute the corridor width of 3 mtrs (including viewing for fixing anchor
towers etc.,)
8 a) Hilly terrain KM 1326 1459
9 b) Plain terrain KM 886 975

a) Submission of reports in the form of good binding including the preparation of sketches
10 vii) for burgie details for each anchor points, scheduling of line details, S.R. values, soil Per set 270 297
classification reports, tower schedule, abstract of towers etc., complete.

b) Drawing the route profile on graph sheet, including geographic feature like Nalas, rivers,
11 gardens, P&T lines railway crossing etc, inclusive of all stationaries. (Normal requirement is 270 297
5 Sets)
Preparing the Schedules: PTCC Proposal : Containing PTCC questionaire, topo sheet
Viii)
12 extracts with marking of the proposed line, SR Report, tower sketch, station single line Set 1069 1176
a)
diagram etc., (30 Copies/Sets)
Per
Railway Crossing proposal with drawing are inclusive of graph sheets and other stationery
13 b) crossin 1069 1176
materials, labour etc., (10 Sets)
g
Per
Tree Schedule Containing the details like name of tree, girth size of tree, distance from
14 c) Hectar 766 843
central line of the alignment, approximate height of the tree etc., complete
e

Forest proposals: Inclusive of all works like fixing of stones at every 20 mtrs in the centre
line and both ends of the corridor, painting of each tree after chipping, writing the numbers
15 d) on the tree, taking girth size of all the trees coming in the corridor at 1 mtr height from GL, Km 4985 5484
approximate height of the tree and forest clearance proposals etc., complete (10 Sets).
Note: This applies to forest area only.

2 Check Survey by using their own Equipment

16 a) Hilly terrain KM 2298 4290
17 b) Plain Terrain KM 1538 2864
3 Taking block levels for Sub-staitons:

1 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Running Peripheral Theodolite traverse along periphery and coordinating and heightening of
all corners/turning points, establishing permanent co-ordinate axis formation of grids at
18 50m intervals for northing and easting with reference to already established permanent co- Acre 1479 1627
a)
ordinate axis levels at 50m grid intersection for preparing plot plan of the entire area with
contours. Including existing structure location.

Establishing datum level and bench marks at every 100m/50m intervals both longitudinal
and laterally and all corners/turning points with stone pillars of size not less than
19 b) No 1479 1627
0.2mx2mx1.0m buried on the ground and exposed top engraved for painting RL, and
coordinates of that point.
Taking level at 5M suitable grid interval in the sub-station area for plotting block levels,
20 c) No 32 35
contour map.
Preparation of CAD drawings, generating the contours using appropriate software and
Per
21 d) submission of 6 sets of blue prints and one tracing sheet (original) and one soft copy etc. 14780 16258
Project
Complete.

Furnishing cutting and filling quantities using appropriate software for earth work Per
22 e) 4434 4877
calculation. Project

Super imposing GA drawings on contour maps in Co-ordination with departmental Per

23 f) 11823 13005
engineers and supply of 12 sets of blue print drawings etc., complete. Project

4 Geo Technical Investigations:

Making 150mm nominal diameter bore holes at various locations in soil using suitable
approved method of boring including, cleaning providing Bore holes at interval and at
change of strata, collections of water samples, observation such as ground water etc.,
24 a) Collection of undisturbed soild samples at ever 2.0m/3.0m interval and at change of strata, Mtrs 2212 2433
transportation of all the collected samples to the laboratory and back filling of bore holes on
completion of the work, complete as per sepcification and instruction of the engineers, for
depths up to 6.0 m below natural ground level or refusal strata.

Conducting various laboratory tests on soil samples at approved laboratory including

preparation of soil samples for determination of soil, Proparties etc., Complete as per
b) specification.
Note: Laboratory identified shall be approved by ESCOM Engineers not below the rank of
EE(Civil).
25 i) Bulk density and moisture content Each 886 975
26 ii) Sieve analysis Each 886 975
27 iii) Hydrometer Analysis Each 886 975
28 iv) Liquid limit and plastic limit Each 886 975
29 v) Shrinkage limits Each 1035 1139
30 iv) Specific gravity Each 1035 1139
31 vii) Standard proctor density test Each 1035 1139
32 viii) Swell pressure Each 1187 1306
33 ix) Free swell index Each 1187 1306
34 x) Uncombined Compressive strength Each 1187 1306
35 xi) Triaxial shear test Each 1187 1306
36 xii) One dimensional consolidation test Each 1187 1306
37 xiii) California bearing ratio Each 1187 1306
Submitting final report in 6 copies including all field records and laboratory test results,
38 C) Per Job 17738 19512
graphs and recommendations etc., complete as per specifications.

Note: The above rates are inclusive of mobilization of Plant Equipment & Materials for,
Topographical survey, block leveling and Geotechnical investigation works, and
Demobilization. No extra rate is admisible for mobilization & Demobilization

5 Excavation for station structure:

2 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

1) 1) Corresponding
Correspondin rates in KPWD
g rates in SR as mentioned
KPWD SR as against each
mentioned classification
against each below shall be
classification adopted.
below shall be 2) Area
adopted. weightages
2) Area applicable for
weightages the respective
applicable for areas as per
the respective latest KPWD SR
Excavation of pits as per specifications for lattice type of station structures, Tr. Plinth, areas as per shall be allowed
control panels, mounting structures for breakers, CT's, PT's Isolators, LA's etc., Excavation latest KPWD to arrive at Final
of trenches for control cables, U.G. Cables, Groundmat etc., SR shall be Rate.
allowed to 3) Extra for
arrive at Final excavation
Rate. under water
3) Extra for conditions
excavation and/or foul
under water conditions
conditions including
and/or foul bailing/pumping
conditions out, rempving
including slush add 20%
bailing/pumpi of the rate of the
ng out, respective rate
rempving on account of

Latest KPWD Latest KPWD SR

39 i) Normal Soil Cmt SR Rates for Rates for hard
hard soil soil

Latest KPWD Latest KPWD SR

40 ii) B.C. Soil Cmt SR Rates for Rates for
Ordinary soil Ordinary soil

Latest KPWD Latest KPWD SR

41 iii) Partially Submerged soil Cmt SR Rates for Rates for
Ordinary soil Ordinary soil

Latest KPWD Latest KPWD SR

42 iv) Fully submerged soil Cmt SR Rates for Rates for
Ordinary soil Ordinary soil

Rate for
ordinary rock Rate for ordinary
(Without rock (Without
43 v) Wet black cotton soil Cmt
blasting) of blasting) of latest
latest KPWD KPWD SR
SR

Latest KPWD Latest KPWD SR

44 iv) Dry fissured/Ordinary rock Cmt SR Rates for Rates for
Ordinary soil Ordinary rock

Rate for
ordinary rock Rate for ordinary
(Without rock (Without
45 vii) Latterite soil Cmt
blasting) of blasting) of latest
latest KPWD KPWD SR
SR

3 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Rate for
ordinary rock Rate for Hard
(With rock (With
46 viii) Hard rock with blasting/Hard latterite Cmt
blasting) of blasting) of latest
latest KPWD KPWD SR
SR
Note 1: For Excavation purposes measurement shall be as per actuals.
2: For foundation purposes predominant soil shall be considered.
6 Excavation (For Tr. Line Tower)
47 i) Normal Soil Cmt
48 ii) B.C. Soil Cmt
49 iii) Partially Submerged soil Cmt Rates as per Rates as above
50 iv) Fully submerged soil Cmt item 5 + 50% per item 5 + 50%
51 v) Wet black cotton soil Cmt extra extra
52 vi) Dry fissured/Ordinary rock Cmt
53 vii) Latterite soil Cmt
54 viii) Hard rock with blasting/Hard latterite Cmt
7 Back Filling :

Rates as per
Rates as per
KPWD SR
KPWD SR
Back filling with excavated earth available near the tower and consolidation layer by layer of applicable to
55 i) Cmt applicable to
150 mm depth with adequate quantity of water. respective
respective area
area +10%
+10% extra
extra

Rates as per Rates as per

KPWD SR KPWD SR
Supplying and back filling with external hard murrum soil with proper consolidation
56 ii) Cmt applicable to applicable to
including lead and lift.
repective area repective area
+10% extra +10% extra

Note: This item is applicable only when Black cotton, soil, wet black cotton soil, dry
fissured rock, ordinary rock, Hard rock are encountered.

8 Concreting and curing (For Both Transmission lines and station structures)

1)
Correspondin
g rates in
latest KPWD 1) Corresponding
SR as rates in latest
mentioned KPWD SR as
against each mentioned
classification against each
Concreting & curing as per specifications including the cost of materials,T&P materials and
shall be classification
a) labour charges with all lead and lift, for lattice type station structures,Tr. Plinth, control
adopted. shall be adopted.
panels, mounting structures for Breakers, CT's PT's Isolators, LA's, etc.,
2) For the 2) For the above
above basic basic rate add
rate add applicable area
applicable weightage as per
area latest KPWD SR.
weightage as
per latest
KPWD SR.

Rates under
Rates under
plain
plain concrete
concrete for
57 i) 1:4:8 concrete (M 7.5) Cmt for foundation
foundation of
of latest KPWD
latest KPWD
SR
SR

4 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Rates under
Rates under
basement of
58 ii) 1:3:6 concrete (M-10) Cmt basement of
latest KPWD
latest KPWD SR
SR

Rates under
raft Rates under raft
59 iii) 1:2:4 concrete (M-15) Cmt foundation of foundation of
latest KPWD latest KPWD SR
SR
Rates under
raft Rates under raft
60 iv) 1:1.5: 3 concrete (M-20) Cmt foundation of foundation of
latest KPWD latest KPWD SR
SR

For arriving at
the rates for
For arriving at
concrete items
the rates for
for
concrete items
transmission
for transmission
lines add 25%
lines add 50%
Concreting and curing as per specifications including the cost of materials, T&P materials weightage to
61 b) Cmt weightage to the
and labour charges with all lead and lift, for Tr. line towers. the basic
basic rates of
rates of
different
different
proportion of
proportion of
concrete
concrete
proposed above.
proposed
above.

Note :
a) Extra as indicated in the relevant KPWD SR may be allowed for providing concrete in
watery situation including cost of bailing out water and removing slush.
b) Only machine mixing is to be used for concreting.
c) Jelly to be used is 20mm and down size for 1:1.5:3, 1:2:4 and 1:3:6 concrete and 40mm
and down size for CC 1:4:8.
d) 50% above KPWD SR is proposed only for Tr line works from 2016.

For sub - station

Providing and fabricating TMT Steel reinforcement including straightning, cutting, works, rate as
bending, hooking, lapping and / or welding wherever required placing in position per KPWD SR
tieing with binding wire and anchoring to the adjoining members wherever necessary kgs New Item and for
including laps and wastages etc., complete as per design, and specification and Transmission
directions (Laps and wastages not to be measured and paid) line works, add
10% extra

9 Towers
62 a) Sorting of tower parts made of fabricated angle iron MT 346 381
Per
63 b) Setting up of stubs templates and from one location to another location Locatio 450 495
n
Assembling and errection of towers including tightening of bolts and nuts including
64 c) MT 2513 2764
loading,unloading at store and site (Including the Wt. of stubs)
Rivetting of tower bolt ends by heating using dry- Acetylene gas and hammering to destroy
threads so as to make the tower members theft - prrof (Bolts at nodal points only to be Per
65 d) 12 13
selected and rivetted up to hieght of bottom cross arm, as per the directions of the field Bolt
engineer)
Per
66 e) Welding of bolts and nuts 12 13
Bolt
Note: For tower errections requiring shutdown 25% above S.R. for item 5c to 5e only are to
be adopted.
10 Supplying and fixing AC devices:
Supplying and fixing G.I. Angle iron 45x45x5 mm (1mtr length) with cleats, bolt & nuts as
67 a) per specification and fixing above 0.5 mtrs length each at inner and outer surface of the Per Set 2459 2705
tower to facilitate running of barbed wire.
68 b) Supplying and fixing barbed wire as per specification Rmtr 47 52

5 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

11 Fixing of Boards
69 a) Fixing Danger Board Nos 48 53
70 b) Fixing Number Plate Nos 48 53
Set (3
71 c) Fixing Phase plate 141 155
Nos)
72 d) Fixing Circuit Plates Nos 48 53
Stringing conductor with out allowing the conductor to touch the ground and
12
with out damaging the conductor

Paving out the conductor from anchor to anchor normally spaced at 5 spans with 4 tangent
towers in between, including providing stays at each anchor points and jointing of
conductors, hositing anf fixing of insulator string, armour rods,vibration dampers, including
A
the cost of T & P materials like comealong, wire ropes, pulley, rollers, suspesnion, clamps,
compression jointing machines with bits , drum stands, manila ropes, truckker and jeep etc
(Rate of 1 route KM of single conductor)

10269 With
73 i For hilly tarrian KM 11296
Coyote ACSR

10269 with
proposed for
74 ii Rabbit on
deletion
towers

7528 With
75 i For plain Tarrian KM 8281
Coyote ACSR

3763 with
proposed for
76 ii Rabitt on
deletion
towers
Stringing of Ground Conductor as above
77 For hilly tarrian KM 5025 5528
78 For plain Tarrian KM 3764 4140
Note:

50% more
above the 50% more above
rates specified the rates
for normal specified for
works is normal works is
admissible for admissible for
shutdown shutdown works
II) For shut down works 50% more than the above rates of the Work (This is applicable to works of 33 of 33 kV and
79
shutdown of 33 kV and above lines only. 11 kV and LT lines shutdown not included). kV and above above lines, CTs,
lines, CTs, PTs, Las only.
PTs, Las only. This is not
This is not applicable for 11
applicable for kV and LT Line
11 kV and LT shut down
Line shut works.
down works.

III) (A) River Crossing works

80 (B) Railway Crossing Works 100% extra 100% extra
(C) Breakdown works in substations & lines
81 IV) 2nd Circuit stringing with 1st circuit under live condition 75% extra 75% extra

V) (A) National highway and State highway crossing works

82 50% extra 50% extra
(B) Works under shutdown condition in both substation and lines (Pre-programed works)

Stringing Conductors for short lengths: These Rates are applicable only when
13 total Length of the entire Line is less than 3 spans (River crossing, railway
crossing Etc.,).

A) Stringing of conductors in special conditions where normal 5 spans between anchor to

anchor are not encountered, whereas anchors are provided at single/ two/ three spans with
average span intervals of 267/320 Mtrs, (rate for spans of single conductor)

6 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

i) For hilly terrian

5795 With
83 a) Anchoring single span upto 320 mtrs. 6375
Coyote
1 Span
2837 With proposed for
84
Rabitt deletion
7185 With
85 b) Anchoring 2 span interval upto 640 mtrs with 1 (ONE) tangent tower only 7904
2 Coyote
Spans 3432 With proposed for
86
Rabitt deletion
8425 With
87 c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only 9268
3 Coyote
Spans 4054 With proposed for
88
Rabitt deletion
ii) For plain terrian
4347 With
89 a) Anchoring single span up to 320 Mtrs 1 Span 4782
Coyote
2094 With proposed for
90
Rabitt deletion
2 5566 With
91 b) Anchoring 2 span interval upto 640 Mtrs with 1 (ONE) tangent tower only 6123
Spans Coyote
2567 With proposed for
92
Rabitt deletion
3 6236 With
93 c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only 6860
Spans Coyote
3011 With proposed for
94
Rabitt deletion
Stringing Ground Conductor
i) For Hilly terrian

a) Anchoring Single span upto 320 mtrs 1 span New Item 2822

2
b) Anchoring 2 span interval upto 640 mtrs with one tangent tower only New Item 3364
Spans
3
c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only New Item 3999
Spans
ii) For plain terrian

a) Anchoring Single span upto 320 mtrs 1 span New Item 2124

2
b) Anchoring 2 span interval upto 640 mtrs with one tangent tower only New Item 2583
Spans
3
c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only New Item 3041
Spans

NOTE:
For shut down works 50% more than the above rates of the Work (This is applicable to
shutdown of 33 kV and above lines only. 11kV & LT line shutdown works not included).

Rates for Short span stringing in Normal length of the line of more than 3
14
spans comprising of short spans

A) Stringing of conductors in special conditions where normal 5 spans between anchor to

anchor are not encountered, where as anchors are provided at single/ two/ three spans with
average span intervals of 275/320 Mtrs (Rate for spans of Single Conductor)

i) For hilly terrian

863 With
95 a) Anchoring single span upto 320 Mtrs 1 Span 949
Coyote
423 With Proposed for
96
Rabbit deletion
2 1435 With
97 b) Anchoring 2 span interval upto 640 Mtrs with 1 tangent tower only 1579
Spans Coyote
692 With Proposed for
98
Rabbit deletion
3 2104 With
99 c) Anchoring 3 Span interval up to 960 Mtrs with two tangent towers only 2314
Spans Coyote
1015 With Proposed for
100
Rabbit deletion
ii) For Plain terrian

7 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

647 With
101 a) Anchoring single span upto 320 Mtrs 1 Span 712
Coyote
314 With Proposed for
102
Rabbit deletion
2 1057 With
103 b) Anchoring 2 span interval upto 640 Mtrs with 1 tangent tower only 1163
Spans Coyote
518 With Proposed for
104
Rabbit deletion
3 1563 With
105 c) Anchoring 3 Span interval upto 960 Mtrs with two tangent towers only 1719
Spans Coyote
788 With Proposed for
106
Rabbit deletion
Stringing Ground Conductor
i) For Hilly terrian

a) Anchoring Single span upto 320 mtrs 1 span New Item 427

2
b) Anchoring 2 span interval upto 640 mtrs with one tangent tower only New Item 677
Spans
3
c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only New Item 1000
Spans
ii) For plain terrian

a) Anchoring Single span upto 320 mtrs 1 span New Item 323

2
b) Anchoring 2 span interval upto 640 mtrs with one tangent tower only New Item 521
Spans
3
c) Anchoring 3 span interval up to 960 mtrs with two tangent towers only New Item 760
Spans
Material +
15 Grounding of Towers/Equipments
Labour
a) Grounding of towers including cost of 40mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 Mtrs
107 length as per specifications, with 50X6 mm GI Flats 3 Mtr long, salt charcoal, including Set 3010+832 3010+832
excavation charges.

b) Grounding of towers/Equipments excluding the cost of G.I. Pipe/C.I. Pipe as per

108 specifications with 50X6 mm G.I. Flat 3 Mtr Long (to be supplied departmentally). But salt Set 789+832 789+832
& Charcoal to be supplied by contractor. The rates include excavation charges.

c) Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75
Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe
109 Set 1582+1055 7370+2011
using cast iron welding electrodes as per drawing including the cost of excavation (All
materials to be supplied by the contractor)

Note : All the leads from earthmat & equipment should be connected to earth
electrode through the GI Flat 50 x 6 mm of suitable length and welded as per
specifications.
Supplying and fixing of counter poise earthing with GI Stranded wire where hard rock is
110 16 Per Loc 2143+1916 2143+1916
encountered as per specifications. (including excavation charges).
17 Station Structures
Errection, assembly and alignment of Station structure as per the directions of site
111 a) MT 2372 2609
Engineer.
Erection, alignment & assembly of fabricated steel lattice structure, pedestal structures &
112 b) MT 2210 2431
Mounting structures, for G.O.S., CT's, PT's LA's etc.,
18 Erection of Transformers
Per
Moving the Transformer on to the plinth (Maximum allowable distance is 50 mtrs.) more
113 a) MT/ 47 51
than 50 mtrs. approval of the CEE, O&M Zone has to be obtained)
Mtr
Assembly of Transformer parts like bushings, radiators, filling oil into Tr. etc., (for the total
114 b) MT 1059 1165
wt. of the Tr.)

c) Filling oil to the power Tr., Conservator and radiator (for maintenance purpose only).

115 i) For 5 MVA to 20 MVA Tr. Litre 2.26 2.49

Filtration of oil using filter set of the contractor, to bring the insulation value to I.E.
116 d) Litre 4.24 4.66
Specifications.
117 e) Filtering Oil as above but with the filter set supplied by the ESCOM Litre 2.26 2.49
Wiring of Transformer marshalling box, bucholtz relay, fixing Thermometer,
19 OLTC upto control panel and assisting in testing and commissioning by
RT/MT/Firm Engineers.

8 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

118 i) 5 MVA to 6.3/8 MVA Tr. LS 4875 5363

10 MVA to 12.5 MVA Tr. LS New Item 9414
Fabrication of Transformer railing and embedding in Transformer plinth. (Rails
119 20 LS 979 1077
to be supplied by the ESCOMs)

Per Set
120 21 Fixing of H.T. fuse units & wiring 1138 1252
(3 Nos)

22 Wiring Testing & Commissioning of 5 MVA 33/11 kV Power Transformers

a) Wiring: Identification of wires, Ferruling crimping and termination of wires. Wiring of
121
Protective Devices, Cooling fans, Oil flow Pumps, OLTC, RTCC
5/6.3 MVA 5917 6509
8/10 MVA New Item 6575
Above 10 MVA New Item 9862

b) Testing: 1.
Ratio Test 2. SC test
3. Excitation test 4.
Magnetic Balance test 5. Vector
122 Each 23668 26035
group test. 6. induced high
voltage test. 7. OLTC operation.
8. Protective devices operation checks. 9.
stability checks:- for differential and REFR protection

23 Erection of Breakers / 11 kV Kiosks with CTs on Mounting Structures

a) BREAKERS

Erection, assembly, alignment & interpole wiring of breakers with its connected equipments
123 i) Per Set 6654 7319
including movement from the point of unloading to the point of erection.

124 ii) Assisting in Testing and Commissioning Each 1333 1466

Testing & Commissioning:
Wiring: Identification, of wires Ferruling crimping and termination of wires in Breaker &
125 Set 5917 6509
Wiring up to control panel / Relay panels.
Testing: Test for insulation level, gas leakage, Testing for travel time, Trip and close timings.
126 Local Trip close Test, Remote trip and close test, Tripping rhrough relays, operation of Set 23668 26035
interlocks etc.,
24 Erection of CTs and PTs
Erection of CTs and PTs and wiring including movement from the point of unloading to the Set
127 a) 1729 1902
point of erection. (3 Nos)

128 b) Assisting in Testing and Commissioning Set 520 572

c) Testing & Commissioning
Current transformers:
Wiring: Indentification of wires
Ferruling Crimping of lugs Connections up to marshalling box and Control panel. Current
1972 2169
transformers:
Tests: Insulation, Polarity, Ratio, Excitation

Testing & Commissoning of CTs : Set

129 i) 7888 8677
Tests: Insulation, Polarity, Ratio, Excitation (3 Nos)

130 ii) Potential Transformers:

Wiring: Indentification of wires Ferruling Set

1972 2169
Crimping of lugs Connections up to marshalling box. (3 Nos)

Testing & Commissoning of PTs: Set

7888 8677
Tests: Insulation, Polarity, Ratio,excitation. (3 Nos)

25 Erection of NCTs
Erection of NCTs with ground including movement from the point of unloading to the point
131 a) Set 500 550
of erection
132 b) Assisting in Testing and Commissioning Set 64 70
26 Erection of Isolators
Assembly, Errection alignment and wiring including movement from the point of unloading
133 a) Set 1040 1144
to the point of erection. (Upright)
134 b) Assisting in Testing and Commissioning (Upright) Set 106 117

9 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Note :
1) Assisting in testing and commissioning for item No. 13 to 18 means contractors should
provide labourers for testing and commissioning by RT/MT/Firm engineers.
2) Testing & Commissioning in item 13 & 18 means the testing will be carried out bythe
firms themselves using their own testing equipments and staff in presence of the MRT staff
who will witness the tests.

27 Erection of Lightening Arrestors

Erection of Lightning arrestors and wiring including movement from the point of unloading
135 Set 260 286
to the point of erection
Per
136 28 Fixing of Solid Core insulator 86 95
Stack
137 29 Testing & Commissioning: Capacitor Bank with reactors Each 15325 16858
Control Cables and U.G. Cables
30 Formation of Cable Duct

As per Latest
KPWD As per Latest
(i) Burnt brick/size stone/RCC Cable duct including form box, back filling the sides, electrical SR KPWD electrical
138 a) Cmt
removing the excess escavated soil, duct covering with RCC slabs. applicable to SR applicable to
respective respective areas.
areas.

As per Latest
KPWD As per Latest
(ii) Supplying 300 mm dia 1.5" to 2" thick RCC Hume pipes including loading unloading, and
electrical SR KPWD electrical
139 transportation charges and laying at required level and gradient as per the direction of field Rmtr
applicable to SR applicable to
engineer
respective respective areas.
areas.

As per Latest
Providing, laying and jointing PVC pipes conforming to IS 4085-1960, & 7634-1975, and KPWD As per Latest
approved makes with necessary specials such as collars, bends, Elbows, Tee, nipples, plugs electrical SR KPWD electrical
140 b)
with cuts and threads using jointing ring with solutions, wherever necessary as per the applicable to SR applicable to
directions of the field Engineer including all lead and lift. respective respective areas.
areas.

141 i) 25 mm dia (outer) 2mm to 2.5mm thick Mtr

142 ii) 32 mm dia (outer) 2mm to 2.5mm thick Mtr As per Latest
143 ii) 63 mm dia (outer) 2mm to 2.5mm thick Mtr KPWD As per Latest
144 iv) 75 mm dia (outer) 2mm to 2.5mm thick Mtr electrical SR KPWD electrical
145 v) 90 mm dia (outer) 2mm to 2.5mm thick Mtr applicable to SR applicable to
146 vi) 110 mm dia (outer) 2mm to 2.5mm thick Mtr respective respective areas.
147 vii) 140 mm dia (outer) 2mm to 2.5mm thick Mtr areas.
148 vii) 160 mm dia (outer) 2mm to 2.5mm thick Mtr
Material+Lab
d) Supplying & Laying cable trays including welding fixing of supports
our
149 i) Cable tray of 600mm width (suitable for cable ducts of A,B & C type) Rmtr 302+209 302+230
150 ii) Cable tray of 300mm width (suitable for cable ducts of A,B & C type) Rmtr 221+141 221+155
151 e) Laying of control cables from equipments to control panels. Rmtr 10 11
31 Control Panels
Erection of control panels, auxilary panels, carrier cabinets etc., alignment and fixing
Per
152 a) properly to foundation base including movement from the point of unloading to the point of 3452 3797
Panel
erection.
Per
153 b) Wiring & assisting in testing and commissioning of panels. 5394 5933
Panel
Test & Commissioning: i) C& R
154 C)
Panels Wiring & Testing:
Per
Wiring: Identification, Ferruling, Crimping, termination of wires in C&R panels. 5917 6509
Panel
Testing: Testing for insulation level, Testing of relays, control operations for closing tripping Per
23668 26035
etc., interlocks Alarm, Annunciation and Indication Checks. Panel

32 11 kV Switchgear

10 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear

a)
Panel/unit including movement from the point of unloading to the point of erection.

Per
155 i) 11kV Indoor/out door switchgear 2078 2286
Panel
Per
156 ii) 11kV Kiosk 1729 1902
Panel
b Wiring & assisting in testing & Commissioning
Per
157 i) 11 kV indoor/ outdoor switchgear 689 758
Panel
Per
158 ii) 11kV Kiosk 689 758
Panel
Testing & Commissioning: Wiring:
c Identification of wires, Ferruling Crimping & Termination of wires for annunciation, etc.,
Testing of Relays, CTs, PTs, & Breaker for operation

159 i) For indoor/outdoor panel comprising of 2I+8F+1BC+1AP3 Per Set 65503 72053

160 ii) For single 11kV panel indoor/outdoor type /Kiosk Nos 13098 14408
161 iii) For additional 11kV panel indoor Nos 6549 7204
162 iv) For each additional 11kV panel out door type/Kiosk Nos 10009 11010

Note:Assisting in testing & Commissioning for item 19,20 & 21 mean contractors should
provide labourers for wiring & Commissioning by RT/MT/Firm Engineers.

33 Busbar Formation
Main bus/cross bus (all the three phases in a segment) of using Coyote-single/double
conductors with fixing of insulator spacers, levelling of string conductors to the required
height above the equipment, including providing jumps to interconnect different segments of
the main bus.
163 a) Main Bus/Cross Bus as above using Single Lynx Conductor 6152 6767
b) Main Bus/Cross Bus as above using Single Coyote Conductor 6152 6767
Formation of cross bus in each individual bay using Lynx/Coyote - Single/Double conductor
with fixing of insulators, spacers, levelling the strung conductors to the required height Per
164 b) Deleted Deleted
above the equipment including providing jumps to inter-connect different segments of the Bay
main bus.
Per
165 34 Faradays Cage Formation as per specification: 254 279
Bay
35 Groundmat
Laying of M.S. Flats, welding, applying ACB paint to welded portion and covering with
166 a) Rmtr 33 36
sodium bentonite clay
50x6mm -
273
50x8mm -
50x6mm - 314
291
Supplying and laying of MS flats, of various sizes, welding and applying ACB paint to welded 50x8mm - 335
b) 75x6mm -
167 portion and covering with sodium bentonite clay, as per the drawing/standard specifications Rmtr 75x6mm - 651
566
and consolidation. 75x8mm - 581
75x8mm -
75x12mm - 615
505
75x12mm -
535

50x6mm -
135
50x8mm -
50x6mm - 155
152
50x8mm - 175
75x6mm -
168 c) Same as above but without sodium bentonite clay Rmtr 75x6mm - 422
367
75x8mm - 454
75x8mm -
75x12mm - 493
395
75x12mm -
429

11 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

50x6mm -
226
50x8mm -
Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the 50x6mm - 260
253
earthmat/ground pit. Each point of earthing with all formation works like bending, 50x8mm - 296
Per 75x6mm -
169 d) twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) 75x6mm - 633
point 541
to the earthmat/ ground pit/ point of earth connection,all the materials supplied by the 75x8mm - 656
75x8mm -
contractor. 75x12mm - 710
571
75x12mm -
618
Providing 25mm dia M.S.rod 1.05 Mtr. Long earthmat spikes including heating, bending
170 e) top 50mm over lap flattening and making spike edge at one end driving into the earth below Each 260 299
the ground level and welding the rod with ground mat flat.
Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non
171 f) Each 864 994
pressure type) for earth pits including all lead and lifts etc.,
36 Providing Deep Bore earthing
"Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod,
including jointing the pipes as per KPTCL standard and providing sodium bentonite
treatment in the annular space, including transportation of rig and other supporting
vehicles etc., complete, as per the directions of engineer in charge, including cost of MS rod
& sodium bentonite".
172 a) Drilling 150mm dia bore Rmtr 687 687
173 b) 40 mm dia MS rod Rmtr 541 638
174 c) Bentonite Clay Kgs 15 15
Per
175 d) Cost of GI flat for joining two rods by welding to obtain continuous length 572 682
joint
37 Spreading of Jelly
Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.

176 i) 20/25 mm Jelly Cmt 1427 1038

Note : Only 20/25mm jelly shall be used.
38 Station Yard Lightning

As per Latest
KPWD As per Latest
electrical SR KPWD electrical
177 a) Supplying and erection of fabricated supporting structures including foundation. Per Set
applicable to SR applicable to
respective respective areas.
areas.

As per Latest
KPWD As per Latest
Per electrical SR KPWD electrical
178 b) Supplying and fixing of Sodium Vapour lamp fittings of 250 watts.
Fitting applicable to SR applicable to
respective respective areas.
areas.

As per Latest
KPWD As per Latest
c) Supplying and laying of 1.1KV, 6 Sqmm PVC cable or any other specified size, testing and electrical SR KPWD electrical
179 Rmtr
commissioning of yard lights. applicable to SR applicable to
respective respective areas.
areas.

Furnished in Furnished in
180 d) Erection of RCC poles with stringing of O.H. conductor/Laying of cable for yard lights.
11kV Works 11kV Works

Material+Lab
39 Painting of structures
our
a) Supplying and painting of two coats of good quality Red Oxide primer after cleaning and
181 Sq Mtr 23+46 23+51
scrapping the surface.
b) As above with 2 coats of good quality Aluminium paint after2 coats of good quality Red
182 Sq Mtr 50+70 50+77
Oxide primer.

12 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

c) Supplying and painting two coats of aluminium paint after cleaning and scraping the
183 Sq Mtr 24+39 24+44
surface wilthout applying Red Oxide primer

184 d) As per (b) but with synthetic enamel paint Sq Mtr 60+77 60+85

e) Supplying and painting two coats of Synthetic enamel paint after cleaning and scraping
185 Sq Mtr 32+37 35+41
the surface without aplying red oxide primer.
40 Battery Set and charger
Installing, assembling, filling of acid, wiring, assisting, test-charging and discharging Battery
a)
set.
186 i) 110 Volts Set 8632 8632
187 ii) 48/24 Volts Set 3456 3456
b) Erection of Battery Charger and wiring
188 i) 110 Volts Set 1379 1379
189 ii) 48/24 Volts Set 1379 1379
Testing & Commissioning of Battery Charger:
Wiring: Identification, Ferruling, Crimping & connecting
190 c)
i)AC Supply cable upto 2 sources ii) Load
cables, connection at charger end upto 10 load points
Testing: i) AC
supply Voltage Phase Sequence. ii)
Testing of Output DC Voltages in Boost/Float/Trickle/Variations as per the
order/requirement . iii)
Testing for Ripple Factor.
191 Commissioning: i) Fixing
of Boost Voltage level ii) Fixing of
Float Voltage level
iii) Fixing of Trickle Volage level
iv) Testing of alarm, indication and load ckts, Auto /Manual change overs etc.
v) Full load test in Boost & Trickle modes.

192 i) 110V DC: (1 set for 33kV Stations) Per Set 17042 17042

41 Fencing :
Colony and Station yard Boundary fencing including erection of supports

As per KPWD
As per KPWD SR
SR applicable
193 a) Security fencing using 8SWG chainlink/50mm Mesh applicable to
to respective
respective area
area

As per KPWD
As per KPWD SR
SR applicable
194 b) Barbed wire fencing applicable to
to respective
respective area
area

42 PLCC Equipments
195 a) Erection of mounting structures for coupling capacitors Set 4912 5403
196 b) Erection of Coupling capacitors/wave traps/LMU. Set 1846 1846
197 c) Wiring , testing and commissioning Set 486 486
43 Yard Levelling

As per KPWD
As per KPWD SR
SR applicable
198 Yard Levelling and filling up of soil and consolidation. Cmt applicable to
to respective
respective area
area

44 Watch and Ward

Per
201 Emoluments for watch and ward including pay and DA for 8 hours duty 276 304
shift
45 Transportation
Transportation of Transformer, CT's, PT's, Breakers, C&R Panels, 11KV Switchgears and
EHT LA's only.
a) Using 10 MT Lorry
Proposed for
Rs. 60/- per
deletion as
KM, subject to
199 i) 1 to 50 KMs KPTCL SR
a Min. of
format is
Rs.10000/-
adopted

13 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Proposed for
deletion as
Min + Rs.45/-
200 ii) 51 to 100 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
Min + Rs.34/-
201 iii) 101 to 150 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
Min + Rs.21/-
202 iv) Beyond 150 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
b) Using 10 MT Truck & Trailor KPTCL SR
format is
adopted
Proposed for
Rs. 60/- per
deletion as
KM, subject to
203 i) 1 to 50 KMs KPTCL SR
a Min. of Rs.
format is
2000/-
adopted
Proposed for
deletion as
Min + Rs.45/-
204 ii) 51 to 100 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
Min + Rs.34/-
205 iii) 101 to 150 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
Min + Rs.21/-
206 iv) Beyond 150 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
c) Using 20 MT Truck & Trailor. KPTCL SR
format is
adopted
Proposed for
Rs. 475/- per
deletion as
KM, subject to
207 i) 1 to 50 KMs KPTCL SR
a Min. of Rs.
format is
25000/-
adopted
Proposed for
deletion as
Min + Rs 396
208 ii) 51 to 100 KMs KPTCL SR
/- per KM
format is
adopted
Proposed for
deletion as
Min + Rs 215/-
209 iii) 101 to 150 KMs KPTCL SR
per KM
format is
adopted
Proposed for
deletion as
Min + Rs 192/-
210 iv) Beyond 150 KMs KPTCL SR
per KM
format is
adopted

14 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

Proposed for
Mobilisation charges of IDLE Transportation applicable for places where heavy duty trucks deletion as
211 are not available, is admissible in addition to: (a) as far as possible full load shall be 30 KPTCL SR
transported. format is
adopted
Proposed for
deletion as
27% of the
212 b) Transportation of other materials KPTCL SR
above
format is
adopted
Proposed for
Prevailing
deletion as
c) Using light vehicle including fuel, oil, lubricants and crew subject to a minimum of 100 Board
213 Per Set KPTCL SR
Kms per day in case of break down/ subject to prior approval of CEE. approved
format is
Rates
adopted

Transportation:
a) Transportation of Transformer, CTs PTs, Breakers, C & R Panels, 11kV Switchgears
and EHT LA's only
1. Using 10 MT Lorry
Upto 250kms km New Item 40
greater than 250kms km New Item 35
2. Using 10 MT Truck & Trailor
Upto 250kms km New Item 70
greater than 250kms km New Item 55
3. Using 11MT to 20MT Truck & Trailor
Upto 250kms km New Item 90
greater than 250kms km New Item 70
4. Using 21 MT to 40 MT Truck & Trailor
Upto 250kms km New Item 135
greater than 250kms km New Item 110
5. Using 41 MT to 80 MT Truck & Trailor
Upto 250kms km New Item 575
greater than 250kms km New Item 500
6. Using 81 MT to 120 MT Truck & Trailor
Upto 250kms km New Item 1400
greater than 250kms km New Item 1100
b) Crane hiring charges for substation works
1. Up to 5 hours hour New Item 1500
2. Greater than 5 hours hour New Item 1200

NOTE :
1. The rates are for up and down journey and for a minimum distance of 300kms.
2. Detention charges are Rs. 5000.00 per day for vechicles upto 40MT trailor and Rs.
15000.00 for vehicles greater than 40Mt trailor.

46 Loading and Unloading

a) Loading of Power Trs, CT's. PT's Breakers, C&R Panels, 11KV Switchgears, wavetrap,
214 MT 1824 2006
coupling capacitors, HT UG Cables, Insulators, ACSR Conductor, Ground Conductors, etc.,

b) Unloading of power Transformers, CT's PT's Breakers, C&R Panels, 11 KV Switchgears,

215 Wavetrap, coupling capacitors, HT UG Cables, Insulators, ACSR conductor, Ground MT 1824 2006
conductors, etc.,
216 c) Loading of other materials like structural steel, building materials etc., MT 323 355
217 d) Unloading of other materials like structural steel, building materials etc., MT 323 355
47 Benching, Revetment and Pitching
For
substation
For substation
works as per
works as per
Providing granite rough stone 30 to 50 cms thick dry packing of revetments and pitching KPWD SR and
KPWD SR and
218 side slopes of quadrant including providing the walls, jelly packing, 0.15 cms thick and Cmt for
for Transmission
wedging etc., Complete including cost of conveyance of all materials. Transmission
line works Add
line works
25% extra
Add 25%
extra
48 Labour for 33KV lines using 9/9.5 Mtrs Long RCC Poles

15 of 16
 Labour
Proposed
charges
Sl Item Labour charges
Description Unit Common SR
No No Common SR
2016-17 in
2018-19 in Rs.
Rs.

a) Erection of 9/9.5 Mtrs RCC Poles 300 Kg working load, in the excavated pit as per the
219 approved drawing specification including the cost of excavation, backfilling(Concreting Nos 1374 1511
charges extra)
b) Erection of DP structure including fixing of braces insulators etc., as per the approved
drawings and specifications including the cost of excavation, backfilling (Concreting charges
220 Set 3250 3575
extra).

221 c) Fixing of V-Shape cross arms, single top supports and insulators. Set 96 106
222 d) Fixing of spiral earth electrodes Nos 35 39
223 e) Road/P&T Guarding Set 949 1044
224 f) Stringing Rabbit conductor, fixing disc insulator to cross arms etc., KM 2608 2869
225 g) Stringing Coyote conductor, fixing disc insulator to cross arms etc., KM 4031 4434

As
As provisioned
226 h) Supplying and fixing of AC devices as per specification Rmtr provisioned in
in 11 kV works
11 kV works

49 Dismantling
Same rate as
Same rate as
that of
that of erection
227 i) Dismantling of Power Transformer erection of
of Power
Power
Transformer
Transformer
228 ii) Dismantling charges for conctrete with steel reinforcement Cmt 799 879
229 iii) Dismantling of concrete only Cmt 390 429
75% of
75% of erection
erection
230 iv) Dismantling charges in all other cases charges in
charges in
general
general

16 of 16
Annexure -1

Transportation by Head Load wherever there is no accessability for transportation by vehicle for
transmission line works only

Rough, size,
Earth, Gravel,
cut latterite
Sand, Lime &
Steel, stones,
other
Sl. No. Total distance Cement,per Concrete
Str.Mat.Rate
Ton in Rs. Blocks Rate
per Cmt. In
per Cmt in
Rs.
Rs.

Included in the item Rate

1 Up to 50 Mtrs initial lead

19 24 31
2 Beyond 50Mtrs and upto 100Mtrs

31 39 48
3 Beyond 100 Mtrs and upto 150Mtrs

42 53 66
4 Beyond 150 Mtrs and upto 200Mtrs

52 66 82
5 Beyond 200 Mtrs and upto 250 Mtrs

6 Beyond 250 Mtrs and upto 300 Mtrs 66 82 103

on by vehicle for

RCC Pole
300Kg WL
Rate per
pole in Rs.

379

545

605

696

696