Scribd
Upload
137 views10 pages

Win FIOL CMD

The document provides descriptions for various commands used to configure and monitor 2G and 3G cellular networks. It lists commands for checking frequencies, hopping status, GPRS parameters, faults, alarms, and more. Configuration can be done on the cell, TRX, TG, and BSC levels. CTR files can also be generated for troubleshooting.

Uploaded by

Mangata Acaronar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
137 views10 pages

Win FIOL CMD

The document provides descriptions for various commands used to configure and monitor 2G and 3G cellular networks. It lists commands for checking frequencies, hopping status, GPRS parameters, faults, alarms, and more. Configuration can be done on the cell, TRX, TG, and BSC levels. CTR files can also be generated for troubleshooting.

Uploaded by

Mangata Acaronar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 10

Command Description

RLDEP:CELL=0290811 (Checks FF)CELL UTRANID FDDARFCN


RLccP:CELL=G536151; 0290811 234-15-211-61723-731 10712 142 49
RLCFP:CELL=G15982; Check the Freq
RLDEP:CELL=G10351; BSIC & other information
RLNRP:CELL=G339251,CELLR=all; All relation with parameter values.
RLNRP:CELL=G67451,CELLR=all,nodata; All relation.
RLNRP:CELL=G67451,CELLR=all,utran; 3G relations.
RLMFP:CELL=G36832; BA_List.
RLCHP:CELL=G88282; Check HOPPING status
rlchc:cell=G18242,CHGR=1,HOP=on; change status of hopping
RLLHP:CELL=S100110; Check LayerThr
RLGSP:CELL=G222742; Check GPRS
RLSBP:CELL=G67451; Check CRO,PT
RLLOP:CELL=G67451; Check BS/MSRXMIN
RLGRP:CELL=G112832; Check the RP
RAEPP:ID=ALL; Check BSC level parameter
RLdhp:CELL=G10051; DTHAMR, DHA is ON etc
rlslp:cell=G733431 check status of the tch
RXASP:MO=RXOTG-22; Give alarm status on cell
RLDHC:CELL=G12345,DHA=ON,DTHAMR=15,DTHNAMR=15; change dthamr and dtnamr
RXTCP:MOTY=RXOTG,CELL=G10351; Identify the RXOTG id
RCMOP:MO=RXOTX-28-0; TG to Cell
RXCDP:MO=RXOTG-28; TG to freq (room for TRX)
RXMFP:MO=RXOTG-28,subord; Set Dump
RLSBP:CELL=G67451; Cro , PT
rlsbc:cell=G775151,cro=6,PT=31;
ratrp; Check for recirding status
ioifp:file=ctrfile; Next available file.
ioifc:file=ctrfile,maxsize=No; Remove the file
ioife:file=ctrfile; Hold Next available file.
cpfife ctrfile Hold Next available file. APG40 only
ratri:cell=G01672,dtime=60,rtype=ev&me,event=ca; Initiate CTR
iofat:file=ctrfile-0137,hex; Set Dump
eritrace ctr0002.hex beacf ctr Convert to CSV

RLCFE:CELL=G01672,CHGR=1,DCHNO=996; Delete Freq (OLD)


RLCFI:CELL=G01672,CHGR=1,DCHNO=982; Insert Freq (NEW)
RLCCC:CELL=G347492,sdcch=4,tn=1&2,chgr=0; Allocate 2 SDCCH on PGSM - TRX

rxtcp:cell=g00521,moty=rxotg;     Tg value eg  121


rxcdp:mo=rxotg-121;   shows the config of ts and TRUs

rxasp:mo=rxotg-121;   equipment alarm


rxasp:mo=rxocf-121;   equipment alarm

rxtcp:cell=G101452,moty=rxotg;
rxcdp:mo=rxotg-141;
rlcrp:cell=g101452;
rxcap:MO=rxocf-141;
rxapp:mo=rxotg-141; check e1
rllop:cell=G13282; check msrxmin
rlloc:cell=G13282,msrxmin=100; change msrxmin value
rldep:cell=G18943; mfrms. To change need to halt the cell first

rlsvp:cell=G10051; check power saving feature

rlstc:cell=G11761,chgr=1,state=halted lock egsm channels


rxmop:mo=rxotrx-190-2; check frequency of 3rd trx
RXBLI:MO=rxotrx-29-3,subord block trx.
RXBLE:MO=rxotrx-29-3,subord DEBLOCK TRX. Sometime you may have to halt and ac

rxmfp:mo=rxocf-174; to get cdu type


rxmop:mo=rxotg-174;

Command Description
RLCFP:CELL=G15982; Check the Freq
RLDEP:CELL=G10351; BSIC & other information
RLNRP:CELL=G339251,CELLR=all; All relation with parameter values.
RLNRP:CELL=G67451,CELLR=all,nodata; All relation.
RLNRP:CELL=G67451,CELLR=all,utran; 3G relations.
RLMFP:CELL=G36832; BA_List.
RLCHP:CELL=G88282; Check HOPPING status
RLLHP:CELL=S100110; Check LayerThr
RLGSP:CELL=G222742; Check GPRS
RLSBP:CELL=G67451; Check CRO,PT
RLLOP:CELL=G67451; Check BS/MSRXMIN
RLGRP:CELL=G112832; Check the RP
RAEPP:ID=ALL; Check BSC level parameter
RLdhp:CELL=G10051; DTHAMR
rlslp:cell=G733431 check status of the tch
RXASP:MO=RXOTG-22; Give alarm status on cell

RXTCP:MOTY=RXOTG,CELL=G10351; Identify the RXOTG id


RCMOP:MO=RXOTX-28-0; TG to Cell
RXCDP:MO=RXOTG-28; TG to freq (room for TRX)
RXMFP:MO=RXOTG-28,subord; Set Dump

ratrp; Check for recirding status


ioifp:file=ctrfile; Next available file.
ioifc:file=ctrfile,maxsize=No; Remove the file
ioife:file=ctrfile; Hold Next available file.
cpfife ctrfile Hold Next available file. APG40 only
ratri:cell=G01672,dtime=60,rtype=ev&me,event=ca; Initiate CTR
iofat:file=ctrfile-0137,hex; Set Dump
eritrace ctr0002.hex beacf ctr Convert to CSV

RLCFE:CELL=G01672,CHGR=1,DCHNO=996; Delete Freq (OLD)


RLCFI:CELL=G01672,CHGR=1,DCHNO=982; Insert Freq (NEW)
RLCCC:CELL=G347492,sdcch=4,tn=1&2,chgr=0; Allocate 2 SDCCH on PGSM - TRX

rxtcp:cell=g00521,moty=rxotg;     Tg value eg  121


rxcdp:mo=rxotg-121;   shows the config of ts and TRUs
rxasp:mo=rxotg-121;   equipment alarm
rxasp:mo=rxocf-121;   equipment alarm

rxtcp:cell=G101452,moty=rxotg;
rxcdp:mo=rxotg-141;
rlcrp:cell=g101452;
rxcap:MO=rxocf-141;
rxapp:mo=rxotg-141; check e1

RLSLP:CELL=G12345; DISPLAYS NO. OF SUPERVISION LEVELS - STATUS


RLCFP:CELL=G12345; DISPLAYS NO. OF FREQS / HOPING STATUS
RLCRP:CELL=G12345; DISPLAYS NO. OF TCHS / ICM BAND
RLSTP:CELL=G12345; CHECKS IF SITE IS ACTIVE OR HALTED
RXTCP:CELL=G12345,MOTY=RXOTG; FINDS MO FOR THAT SITE

RLMFP:CELL=G12345; GET BA LIST FOR CELL


RLMSP:MO=RXOTG-123; GIVES FAULT CODES IF ANY
RLMSP:MO=RXO(CF)-123; FOR 2000 SITES ONLY
RLMSP:MO=RXOTF-123;
RLMSP:MO=RXOTRX-123-0;
RLMSP:MO=RXOTX-123-0;
RLMSP:MO=RXORX-123-0;
RLMSP:MO=RXOTS-123-0-0&&-7;
RLMSP:MO=RXOTG,SUBORD;

RXBLI:MO=RXOTG-123; BLOCKS MANAGE OBJECT


RXBLI:MO=RXOTG-123,FORCE; FORCES COMMAND THROUGH
RXBLI:MO=RXOTF-123;
RXBLI:MO=RXOTRX-123-0;
RXBLI:MO=RXOTX-123-0;
RXBLI:MO=RXORX-123-0;
RXBLI:MO=RXOTS-123-0-0&&-7;
RXBLI:MO=RXOTRX-123-123,SUBORD;

RXBLE:MO=RXOTG-123; UNBLOCKS MANAGE OBJECT


RXBLE:MO=RXOTG-123,FORCE; FORCES COMMAND THROUGH
RXBLE:MO=RXOTF-123;
RXBLE:MO=RXOTRX-123-0;
RXBLE:MO=RXOTX-123-0;
RXBLE:MO=RXORX-123-0; RE-BLOCK
RXBLE:MO=RXOTS-123-0-0&&-7;
RXBLE:MO=RXOTRX-123-123,SUBORD;
RXMFP:MO=RXOTG-123,FAULTY,SUBORD; ALL ACTIVE FAULTS IN THE TG

RXTEI:MO=RXO-123; TESTS MO
RXESE:MO=RXO-123; REMOVES DATA FROM MO ONCE BLOCKED
RXESI:MO=RXO-123; RELOADS DATA INTO MO
RXPLI:MO=RXO,UC; FORCES DATA INTO MO AFTER BEING BLCOKED

RXMFP:MO=RXOTG-123-0-0; DISPLAYS FAULT CODES ON MO


RXCDP:MO=RXOTG-123; PRINTS FAULT CODES ON MO (ON SCREEN)
RXMOP:MO=RXOTRX-123-0; GIVES SOFTWARE AND RBLT DEVICES
RLCHC:CELL=12345,HOP=OFF/ON; HOPPING OFF AND ON ON TIMESLOTS
RXLTI:MO=RXOTS-123-0-088-7; LOOP TEST TIME SLOTS
RLSTC:CELL=G12345.STATE=HALTED; HALTS ACTIVE SITE
RLSTC:CELL=G12345.STATE=ACTIVE; ACTIVATES HALTED SITE
RLDEP:CELL=G12345; CELL ID NUMBERS
RXELP:MO=TXO; INTERMITTENT FAULT INC CF/TX/RX/TRX
AXE/H=(BXKAN)/PORT LOGS ONTO SWITCH WHEN AUTO FAILS
ALLIP:ALCAT=EXT; ALARM PRINT LIST
D FDDARFCN SCRCODE MRSL
31 10712 142 49

Lower limit in MS desired for signal strength(MSRXMIN) default 102…Lower limit in BTS desired for signal strengt

MO
MO
MO check if TRX halted/blocked etc
MO

CTR
CTR
CTR
CTR
CTR
CTR
CTR
DOS
the cell first

u may have to halt and activate the cell for it to come back up

MO
MO
MO
MO

CTR
CTR
CTR
CTR
CTR
CTR
CTR
DOS
SION LEVELS - STATUS
HOPING STATUS

OR HALTED

ONCE BLOCKED

TER BEING BLCOKED

MO (ON SCREEN)
CF/TX/RX/TRX
AUTO FAILS
BTS desired for signal strength (BSRXMIN) default 110
Special Event 2G parameters
ncells set to max sdcch
dcells fpdch=0
dcells cro=60
dccels pt=31
dcells dha =on
(MSRXMIN)Lower limit in MS desired for signal strength
(BSRXMIN)…Lower limit in BTS desired for signal strength

You might also like