Section 7

Pumps, Reels, Meters

& Nozzles
 Section 7
Pumps, Reels, Meters & Nozzles
Blackmer Pumps 2-42 Mouvex 43-65
Hydraulic Motor Adaptor Kit 40 Enterprise Compressors 43-54
Relief Valves 38-39 E140/E170 43-48
Strainers 37 E56/E106/E156 (Obsolete) 49-54
STX & STX-DEF 21-28 Hydraulic Coolers 55-65
STX1220A/STX1220A-DEF 23-24 2010 Cooler 57-62
STX2A/STX2A-DEF 25-26 2020 Cooler 63-65
STX3/STX3-DEF 27-28 Roper Pumps 66-73
TLGLF4 33-36 Safety Pumping Systems 74-75
Transmax TX206A 31-32 Total Controls Sys. (TCS Meter) 92-105
Troubleshooting 41 700-20/700-25 Meter 94-95
TX & TXD Series 2-13 700-30/700-35 Meter 96-97
TX1.5 4-5 700-40/700-45 Meter 98-99
TXDA2A/TX2A 6-7 720-20 Strainer 100-101
TXD2.5A/TX2.5A 8-7 720-30 Strainer 102-103
TXD3E/TX3E 10-11 730 Air Eliminator 104-105
TX4A 12-13 Nozzles 106
TXD 1200 Series 14-19 Swivels 106
TXD1125A 16-17
TXD1230A 18-19
Blackmer/Mouvex Warranty Form 42
Dixon Pumps 76
Hannay Reels 77-85
Reel Parts Breakdown 77
Reep Parts & Accessories 78-85
Liquid Controls (LC Meter) 86-91
Meter Configuration Chart 86
M-5 Parts Breakdown 87
M-7 Parts Breakdown 88
M-15 Parts Breakdown 89
Air Eliminators & Strainers 90
Flanges 90
Registers & Printers 91
 Your headquarters for all
things Mouvex!

CC20 Eccentric Disc Pump

Hydrive 2010 & 2020 Hyrdaulic Cooler

Enterprise E140 & E170 Compressor

7-1
www.wertswelding.com
 Spec Sheet 201-001
Section: 201
Effective: January 2012
Replaces: April 2009

TX & TXD Series

Sliding Vane Pumps

How Blackmer’s sliding vane action works

Reliability Sizing Options

Durable pumps for fast and quiet Available in 1.5, 2, 2.5, 3, and 4-inch port
operation. Sliding vane design provides sizes with flow rates from 10 to 500 U.S.
sustained performance and trouble free gallons (2 to 113 m3/h) and pressures up
operation. to 125 psi (8.6 bar).

Unique Features Applications

TXD models are equipped with FKM O-rings and
Adjustable relief valve protects pump from ■ Fuel oil delivery ■ Transport of: Blackmer mechanical seals that are compatible with
excessive pressure. Optional air operated truck • petro chemicals all biodiesel and ethanol blends. TXD options include
relief valve offers easy hose and nozzle ■ Fleet refueling • gasoline corrosion resistant relief valve, pneumatic relief valves
handling. T-type strainers are available to ■ Lube oil • biofuels and Buna or PTFE elastomers and seals.
protect pumping systems from damage ■ Aviation refuelers • solvents
caused by welding slag and foreign matter • and many more
in the piping and tanks.

7-2
www.wertswelding.com
Performance Data Maximum Operating Limits
Pump Model TX1.5 TXD2 TXD2.5 TXD3 TX4 Nominal Pump Differential Working
Pump Viscosity Temperature
Rated Flow rate Speed Pressure Pressure
780 600 400 640 520 640 520 640 520 500 400 Model
Pump Speed gpm L/min rpm ssu cP psi bar psi bar °F °C
gpm 52 40 25 72 58 120 98 263 211 505 405 TX1.5 56 212 780 20,000 4,250 125 8.6 175 12.1 300 149
L/min 197 151 95 273 220 454 371 995 799 1,911 1,533 TXD2 87 329 780 20,000 4,250 125 8.6 175 12.1 300 149
m /h
3
12 9 6 16 13 27 22 60 48 115 92 TXD2.5 157 594 780 20,000 4,250 125 8.6 175 12.1 300 149
hp 2.4 1.9 1.3 3.0 2.5 5.0 3.8 11.1 8.6 18.2 15 TXD3 270 1,022 640 20,000 4,250 125 8.6 175 12.1 300 149
kW 1.8 1.4 1.0 2.2 1.9 3.7 2.8 8.3 6.4 13.6 11.2 TX4 505 1,911 500 20,000 4,250 125 8.6 175 12.1 240 116
* Appropriate capacities and horsepower (hp) are based on a 100 ssu (22 cP) fluid a 50 psi (3.4 bar)
delivered pressure. Refer to Characteristic Curves for flow rates and torque requirements at other
pressures and viscosities.

Dimensions Pump Rotation

Blackmer TXD models are equipped with a
TT
double-ended drive shaft for either clockwise
(RH) or counterclockwise (LH) rotation.
BB Standard rotation for the TX1.5 is
counterclockwise (LH) when viewed from the
drive shaft. Standard rotation for the TX4
S AA
model is clockwise (RH).
D E

Options
Q
■ Buna or PTFE O-rings
■ Pneumatic relief valve
M
■ Hydraulic Motor Adapters
G ■ Strainers
K

Model A B D E G K M Q S T AA BB DD TT Approx. Weight

in. 1¹/8 ¹/4 7 /16
13
5 /16
1
3 /81
6 /2
1
4 8 /2
1
7 3 /16
9
– – 10 /8
3
– 61 lbs.
TX1.5
mm – – 198 129 79 165 102 216 178 90 – – 264 – 28 kg
11/4" HYD 1" HYD
Motor Motor
Shaft Shaft
in. 1¹/8 ¹/4 8 51/4 31/2 61/2 4 811/16 61/8 37/8 83/4 85/16 107/8 109/16 121/8 70 lbs.
TXD2
mm – – 203 133 89 165 102 221 156 98 222 211 276 268 308 32 kg
in. 1¹/8 ¹/4 83/4 6 47/8 7 4 95/8 613/16 315/16 91/2 811/16 115/8 115/16 135/16 94 lbs.
TXD2.5
mm – – 222 152 124 178 102 244 173 100 241 221 295 287 338 43 kg
in. 1¹/8 ¹/4 95/8 67/16 43/8 71/4 53/8 1213/16 89/16 415/16 1011/16 97/16 123/8 153/8 152 lbs.
TXD3
mm – – 244 164 111 184 137 325 217 125 271 240 314 391 69 kg
in. 1¹/2 ³/8 11 81/4 7 91/2 63/8 151/2 81/2 63/8 – – – – 295 lbs.
TX4
mm – – 279 210 178 241 162 394 217 162 – – – – 134 kg

Process | Energy | Military & Marine

7-3
www.wertswelding.com 2/12 - 1M
 961223 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-A01
PUMP MODEL: TX1.5 Section 201
Effective Aug 2013
Keep with Instructions 201-A00 for Installation, Operation and Maintenance Replaces Jan 2012

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1 Cap – Relief Valve (R/V) 1 411453 21 Capscrews – Head 16 920331
1
2 Adjusting Screw – R/V 1 431401 24 Ball Bearing 2 903156
1
4 Cover – R/V 1 411469 26 Gasket- Bearing Cover 2 381406
5 Capscrew – R/V Cover 3 920316 27 Bearing Cover – Outboard 1 041433
5A Capscrew w / Hole – R/V Cover 1 920310 27A Bearing Cover – Inboard 1 041431
7 Spring Guide – R/V 1 423955 28 Capscrews – Bearing Cover 8 920285
1, 2
8 Spring – R/V (36-50 psi) 1 471415 35 Key – Shaft Square 1 909160
1
Spring – R/V (51-75 psi) 471420 O-Ring – Head (FKM) 702229
1
Spring – R/V (76-100 psi) (Std.) 471425 72 O-Ring – Head (Buna-N) 2 702228
Spring – R/V (101-125 psi) 471428 O-Ring – Head (PTFE) 702230
9 Valve – R/V 1 451416 73 Gage Plug 2 908198
Valve – R/V (Nickel Plated) 451414 76 Grease Fitting 2 317815
1
10 O-Ring – R/V Cover (FKM) 1 702212 76A Grease Relief Fitting 2 701992
1 1
O-Ring – R/V Cover (Buna-N) 702211 77 Push Rods 2 123305
1
O-Ring – R/V Cover (PTFE) 702213 88 Gasket – R/V Cap 1 701981
1
12 Cylinder 1 021203 104 Grease Seal 1 331918
1
13 Rotor & Shaft 1 261205 123A Dirt Shield 1 701480
1
14 Vane – Duravane (Std.) 4 091219 153 Mechanical Seal 2 See Backside
Vane – Bronze 093328 Kit – Maintenance, FKM 899179
20 Head 2 031207 Kit – Maintenance, Buna 898949
1 2
Included in Maintenance Kit Maintenance Kit also includes Woodruff Key 909130 previously used
7-4
www.wertswelding.com
MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
153 Cast Iron Stationary Seat, Carbon 2 331655
Seal Face, FKM O-Rings. (IVCV)
Mechanical Seal Complete -
1
Cast Iron Stationary Seat, Carbon 331601
Seal Face, Buna-N O-Rings. (INCN)
Mechanical Seal Complete -
Cast Iron Stationary Seat, PTFE
331673
O-Ring, Carbon Seal Face w/ PTFE
Seal Ring. (IACT)
O-Ring - Stationary (Buna-N) 701934
153D O-Ring - Stationary (FKM) 2 701921
O-Ring - Stationary (PTFE) 702056
O-Ring - Rotating (Buna-N) 701922
153L O-Ring - Rotating (FKM) 2 701980
Seal Ring - Rotating (PTFE) **
1
Included in Maintenance Kit
* * PTFE Rotating Seal Ring is not available as a separate part.

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

PART NO. PART NO.
PARTS
REF. 1” 1” H-Series
PART NAME PER
NO. Hyd Motor Hyd Motor
PUMP
Shaft Shaft
See * See
Below Hydraulic Motor Adapter Kit
891205 891464
Below
26A Gasket – Hydraulic Motor Adapter 1 383940 383940
Capscrew –
28A 4 920369 920369
Hydraulic Motor Adapter / Head
Coupling w/ Setscrew –
34 1 906966 906966
for 1” straight key hydraulic motor
76 Grease Fitting 1 317815 317815
76A Grease Relief Fitting 1 701992 701992
Hydraulic Motor Adapter –
135 1 041827 041807
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510

7-5
www.wertswelding.com
 961415 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-A02
PUMP MODELS: TXD2A (Double Ended Shafts) Section 201
TX2A (Single Ended Shafts) Effective Mar 2012
Keep with Instructions 201-A00 for Installation, Operation and Maintenance Replaces Jan 2012

LOCKNUT TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
4
1 Cap – Relief Valve (R/V) 1 411453 24B Lock washer - Bearing 2 903522
1
2 Adjusting Screw – R/V 1 431401 26 Gasket – Bearing Cover 1-2 381406
4 Cover – R/V 1 411401 27A Bearing Cover 1-2 041431
5 Capscrew – R/V Cover 3 920316 Bearing Cover – Outboard 0-1 041433
5A Capscrew w / Hole – R/V Cover 1 920310 28 Capscrews – Bearing Cover 8 920285
1, 6
7 Spring Guide – R/V 1 423955 35 Key – Shaft Square 1 909209
8 Spring – R/V (36-50 psi) 1 471415 42 – Flanges, Flange Gaskets / O-rings, See
Spring – R/V (51-75 psi) 471420 42C and Flange Capscrews Backside
1
Spring – R/V (76-110 psi) (Std.) 471425 72 O-Ring – Head (FKM) 701914
1
Spring – R/V (111-125 psi) 471428 O-Ring – Head (Buna-N) 2 701947
9 Valve – R/V 5 1 451417 O-Ring – Head (PTFE) 702242
Valve – R/V (Ni Plated) 451415 73 Gage Plug 2 908198
1
10 Gasket – R/V Cover 1 531403 76 Grease Fitting 2 317815
12 Cylinder 1 021403 76A Grease Relief Fitting 2 701992
2 1
13A Rotor & Shaft – Double Ended 1 261411 77 Push Rod 2 123905
2 1
Rotor & Shaft – Single Ended 261426 88 Gasket – R/V Cap 1 701981
1 1
14 Vane – Duravane 4 091419 104 Grease Seal 1-2 331918
1
20 Head (Std.) 2 031425 123A Dirt Shield 1-2 701480
Head with Drain 031426 186 Shaft Protector 0-1 341601
21 Capscrews – Head 16 920331 Air Valve Kit 891454
1
24 Ball Bearing 2 903156 Tool - Locknut 903091
4
24A Locknut - Bearing 2 903521 Maintenance Kit, FKM 898956
1 2 Maintenance Kit, Buna 898950
Included in Maintenance Kit Includes 24A & 24B
4
Earlier models were not fitted with locknuts and lock washers.
The current rotor / shaft with locknuts and lock washers may be fitted in place of shafts without locknuts and lock washers.
5
For Piston Style Air Operated RV see IOM 201-G00, Diaphragm Air RV – 201-F00, DMX Diaphragm RV – 201B-B00.
6
Maintenance Kit also includes Woodruff Key 909130 used previously.
7-6
www.wertswelding.com
 MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
Cast Iron Stationary Seat, FKM O-Rings, 2 331655
Carbon Seal Face. (IVCV)
Mechanical Seal Complete -
1
153 Cast Iron Stationary Seat, Carbon Seal Face, 331601
Buna-N O-Rings. (INCN)
Mechanical Seal Complete -
Cast Iron Stationary Seat, PTFE O-Ring, 331673
Carbon Seal Face w/ PTFE Seal Ring. (IACT)
O-Ring – Stationary (FKM) 701921
153D O-Ring – Stationary (Buna-N) 2 701934
O-Ring – Stationary (PTFE) 702056
O-Ring – Rotating (FKM) 701980
153L O-Ring – Rotating (Buna-N) 2 701922
Seal Ring – Rotating (PTFE) **
1
Included in Maintenance Kit
** PTFE Rotating Seal Ring is not available as a separate part.

FLANGES
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
42 Flange – 2" NPT 1–2 651411
Flange – 2" Weld 654405
Flange – 2" Victaulic 654408
1
42A Gasket – Flange, NPT and Weld 0–2 381421
42B Capscrews – 2" NPT Flange 4–8 920351
Capscrews – Victaulic Flanges 920331
42C O-Ring – Victaulic Flange (Buna-N) 0–2 702004
O-Ring – Victaulic Flange (FKM) 702086
O-Ring – Victaulic Flange (PTFE) 702078

OPTIONAL HYDRAULIC MOTOR ADAPTER

PART NO. PART NO. PART NO.
PARTS
REF. 1-¼” 1” 1” H-Series
PART NAME PER
NO. Hyd Motor Hyd Motor Hyd Motor
PUMP
Shaft Shaft Shaft
See Hydraulic Motor See
* 891458 891205 891464
Below Adapter Kit Below
Gasket – Hydraulic Motor
26A 1 383940 383940 383940
Adapter
Capscrew – Hydraulic Motor
28A 4 920369 920369 920369
Adapter / Head
Coupling w/ Setscrew – for
34 1 906967 906966 906966
straight key hyd. motor shaft
35 Key – Coupling 1 909184 N/A N/A
76 Grease Fitting 1 317815 317815 317815
76A Grease Relief Fitting 1 701992 701992 701992
Hydraulic Motor Adapter –
135 1 041828 041827 041807
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510 920510

7-7
www.wertswelding.com
 961615 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-A03
PUMP MODELS: TXD2.5A (Double Ended Shaft) Section 201
TX2.5A (Single Ended Shaft) Effective Aug 2014
Keep with Instructions 201-A00 for Installation, Operation and Maintenance Replaces Jan 2012

LOCKNUT TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1 Cap – Relief Valve (R/V) 1 411453 28 Capscrews – Bearing Cover 8 920285
1,2
2 Adjusting Screw – R/V 1 431401 35 Key – Shaft Square 1 909209
4 Cover – Relief Valve 1 411607 42 Flanges
5 Capscrew – R/V Cover 3 920316 42A Gasket – Flange See
5A Capscrew w / Hole – R/V Cover 1 920310 42B Capscrews – Flange Backside
7 Spring Guide – R/V 1 423955 42C O-Ring – Victaulic Flanges
1
8 Spring – R/V (51-110 psi) (Std.) 1 471631 72 O-Ring – Head (FKM) 701914
1
Spring – R/V (111-125 psi) 471614 O-Ring – Head (Buna-N) 2 701947
9 Valve – R/V 3 1 451623 O-Ring – Head (PTFE) 702242
Valve – R/V (Nickel Plated) 451624 73 Gage Plug 2 908198
1
10 Gasket – R/V Cover 1 531603 76 Grease Fitting 2 317815
12 Cylinder – Pump 1 021605 76A Grease Relief Fitting 2 701992
13A Rotor & Shaft Asy. - Double Ended 4 1
1 261665 77 Push Rod 3 121607
Rotor & Shaft Asy. - Single Ended 4 1
261667 88 Gasket – R/V Cap 1 701981
1 1
14 Vane – Duravane 6 091619 104 Grease Seal 1-2 331918
1
20 Head (Std.) 2 031425 123A Dirt Shield 1-2 701480
21 Capscrews – Head 16 920331 186 Shaft Protector 1 341601
1
24 Ball Bearing 2 903156 Air Valve Kit – Piston Type (FKM) 891725
24A Locknut – Bearing 2 903521 Air Valve Kit – Diaphragm Type 891696
1
24B Lockwasher – Bearing 2 903522 Tool - Locknut 903091
1
26 Gasket – Bearing Cover 2 381406 Maintenance Kit (FKM) 898957
27A Bearing Cover 1-2 041431 Maintenance Kit (Buna-N) 898951
Bearing Cover – Outboard, SE shaft 0-1 041433
1 2
Included in Maintenance Kit Maintenance Kit also includes Woodruff Key 909130 used previously
3
For Piston Style Air Operated RV see IOM 201-G00, Diaphragm Air RV – 201-F00, DMX Diaphragm RV – 201B-B00.

7-8
4
Includes Ref. Nos. 24A & 24B

www.wertswelding.com
MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
153 Cast Iron Stationary Seat, Carbon Seal 2 331655
Face, FKM O-Rings. (IVCV)
Mechanical Seal Complete -
1
Cast Iron Stationary Seat, Carbon Seal 331601
Face, Buna-N O-Rings. (INCN)
Mechanical Seal Complete – Cast Iron
Stationary Seat, PTFE O-Ring, Carbon 331673
Seal Face w/ PTFE Seal Ring. (IACT)
O-Ring – Stationary (FKM) 701921
153D O-Ring – Stationary (Buna-N) 2 701934
O-Ring – Stationary (PTFE) 702056
O-Ring – Rotating (FKM) 701980
153L O-Ring – Rotating (Buna-N) 2 701922
Seal Ring – Rotating (PTFE) **
1
Included in Maintenance Kit
** PTFE Rotating Seal Ring is not available as a separate part.

FLANGES
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
42 Flange – 2" NPT 1–2 651603
Flange – 2 ½" NPT 651611
Flange – 2 ½" Weld 651608
Flange – 2" Victaulic 655116
Flange – 2 ½" Victaulic 655117
Flange – 3" Victaulic 655118
1
42A Gasket – Flange, NPT and Weld 0–2 381650
42B Capscrews – 2" NPT Flange 4–8 920471
Capscrews – 2 ½" NPT Flange 920532
Capscrews – 2 ½" Weld 920491
Capscrews – Victaulic Flanges 920491
42C O-Ring – Victaulic Flange (Buna-N) 0–2 701925
O-Ring – Victaulic Flange (FKM) 701924
O-Ring – Victaulic Flange (PTFE) 702079

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

PART NO. PART NO.
PARTS
REF. 1-¼” 1”
PART NAME PER
NO. Hyd Motor Hyd Motor
PUMP
Shaft Shaft
Hydraulic Motor Adapter Kit * 891458 891205
Gasket –
26A 1 383940 383940
Hydraulic Motor Adapter
Capscrew –
28A 4 920369 920369
Hydraulic Motor Adapter / Head
Coupling w/ Setscrew –
34 1 906967 906966
for straight key hyd. motor shaft
35 Key – Coupling 1 909184 N/A
76 Grease Fitting 1 317815 317815
76A Grease Relief Fitting 1 701992 701992
Hydraulic Motor Adapter –
135 1 041828 041827
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510

7-9
www.wertswelding.com
 961815 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-A04
PUMP MODELS: TXD3E (Double Ended Shafts) Section 201
TX3E (Single Ended Shafts) Effective Jan 2012
Keep with Instructions 201-A00 for Installation, Operation and Maintenance Replaces Apr 2009

LOCKNUT TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1
1 Cap – Relief Valve (R/V) 1 413957 26 Gasket – Bearing Cover 2 381817
2 Adjusting Screw – R/V 1 431808 27A Bearing Cover 1-2 041815
3 Locknut – Adjusting Screw 1 922923 Bearing Cover - Outboard 0–1 041817
4 Cover – R/V 1 411807 28 Capscrews – Bearing Cover 12 920285
1
5 Capscrew – R/V Cover 3 920331 35 Key – Shaft 1 909178
5A Capscrew w / Hole – R/V Cover 1 920330 42 – Flanges, Flange Gaskets / See
7 Spring Guide – R/V 1 421805 42C O-rings, and Flange Capscrews Backside
1
8 Spring – R/V (51-75 & 76-110 psi) (Std.) 1 471806 O-Ring - Head (FKM) 2 711938
1
Spring – R/V (111-125 psi) 471809 72 O-Ring - Head (Buna-N) 701944
9 Valve - R/V 3 1 451807 O-Ring - Head (PTFE) 702233
Valve - R/V (Nickel Plated) 451808 73 Gage Plug 2 908198
1
10 Gasket – R/V Cover 1 531803 76 Grease Fitting 2 317815
12 Cylinder 1 021805 76A Grease Relief Fitting 2 701992
13A Rotor & Shaft Asy. - Double Ended 2 1
1 261837 77 Push Rod 3 121807
2 1
Rotor & Shaft Asy. - Single Ended 261839 88 Gasket - R/V Cap 1 533908
1
14 Vane – Duravane 6 091819 104 Grease Seal 1 - 2 1 331908
20 Head 2 031815 186 Shaft Protector 0-1 341801
21 Capscrews – Head 20 920369 Air Valve Kit 891798
1
24 Ball Bearing 2 903172 Tool - Locknut 903091
24A Locknut – Bearing 2 903523 Maintenance Kit, FKM 898958
1
24B Lockwasher - Bearing 2 903524 Maintenance Kit, Buna-N 898952
1 2
Included in Maintenance Kit Includes ref. Nos. 24A & 24B
3
For Piston Style Air Operated RV see IOM 201-G00, Diaphragm Air RV – 201-F00, DMX Diaphragm RV – 201B-B00.
7-10
www.wertswelding.com
MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
Cast Iron Stationary Seat, FKM O-Rings, 2 331883
Carbon Seal Face. (IVCV)
Mechanical Seal Complete -
1
153 Cast Iron Stationary Seat, Carbon Seal 331880
Face, Buna-N O-Rings. (INCN)
Mechanical Seal Complete - Cast Iron
Stationary Seat, PTFE O-Ring, Carbon 331873
Seal Face w/ PTFE Seal Ring. (IACT)
O-Ring - Stationary (FKM) 711931
153D O-Ring - Stationary (Buna-N) 2 701936
O-Ring - Stationary (PTFE) 702080
O-Ring - Rotating (FKM) 701962
153L O-Ring - Rotating (Buna-N) 2 711912
Seal Ring - Rotating (PTFE) **
1
Included in Maintenance Kit
* * PTFE Rotating Seal Ring is not available as a separate part.

FLANGES
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
42 Flange – 3" NPT 1–2 651803
Flange – 3" Weld 655102
Flange – 3" Victaulic 655120
1
42A Gasket – Flange, NPT and Weld 0–2 381816
42B Capscrews – NPT Flange 4–8 920532
Capscrews – Weld & Victaulic Flange 920510
42C O-Ring – Victaulic Flange (Buna-N) 0–2 702002
O-Ring – Victaulic Flange (FKM) 711931
O-Ring – Victaulic Flange (PTFE) 702080

OPTIONAL HYDRAULIC MOTOR ADAPTER

REF. PART NAME PARTS PART NO. PART NO.
NO. PER 1-¼” 1”
PUMP Hyd Motor Hyd Motor
Shaft Shaft
Hydraulic Motor Adapter Kit * 895140 895143
26A Gasket – Hydraulic Motor 1 381817 381817
Adapter
28A Capscrew – 6 920369 920369
Hydraulic Motor Adapter / Head
34 Coupling w/ Setscrew – 1 906967 906990
straight key hydraulic motor
35 Key – Coupling 1 909184 909184
76 Grease Fitting 1 317815 317815
76A Grease Relief Fitting 1 701992 701992
135 Hydraulic Motor Adapter – 1 041831 041831
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510

7-11
www.wertswelding.com
 960286 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-A05
PUMP MODEL: TX4A Section 201
Effective Jan 2012
Keep with Instructions 201-A00 for Installation, Operation and Maintenance Replaces Jan 2010

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1
1 Cap – Relief Valve (R/V) 1 413957 24C Jam Nut 4 922923
1
2 Adjusting Screw – R/V 1 436307 26 Gasket – Bearing Cover 2 386950
3 Locknut – Adjusting Screw 1 436355 27 Bearing Cover – Outboard 1 041905
4 Cover – R/V 1 411904 27A Bearing Cover – Inboard 1 041903
5 Capscrew – R/V Cover 5 920351 28 Capscrews – Bearing Cover 12 920491
1, 2
5A Capscrew w / Hole – R/V Cover 1 920348 35 Key – Shaft, Square 1 909149
7 Spring Guide – R/V 1 426355 42 Flange – 4" NPT 1-2 651900
8 Spring, Steel – R/V (35-50 psi) 1 476303 Flange – 4" Weld 651905
1
Spring, Steel – R/V (51-75 psi) 476310 42A Gasket – Flange 2 381903
Spring, Steel – R/V (76-125 psi)(Std.) 476305 42B Capscrew – Flange 16 920532
1
9 Valve – R/V (Std.) 1 456315 72 O-Ring – Head (FKM) 702024
1
Valve – R/V (Nickel Plated) 456300 O-Ring – Head (Buna-N) 2 702023
1
10 Gasket – R/V Cover 1 531903 O-Ring – Head (PTFE) 702093
12 Cylinder 1 021906 73 Gage Plug 2 908198
13 Rotor & Shaft 1 261950 76 Grease Fitting 2 317815
1
14 Vane – Duravane 6 091924 76A Grease Relief Fitting 2 701992
1
20 Head 2 031908 77 Push Rod 3 121905
1
21 Capscrews – Head 24 920510 88 Gasket – R/V Cap 1 533908
1 1
24 Ball Bearing 2 903182 104 Grease Seal 1 904190
1
24A Lock Collar – Bearing 2 721937 Kit – Maintenance, FKM 898959
1
24B Setscrew 4 922104 Kit – Maintenance, Buna-N 898953
1 2
Included in Maintenance Kit Maintenance Kit also includes Woodruff Key 909135 used previously.
.

7-12
www.wertswelding.com
MECHANICAL SEALS – TX4A MODELS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
Cast Iron Stationary Seat, Carbon Seal Face 336982
w/ FKM O-Rings. (IVCV)
Mechanical Seal Complete –
1
Cast Iron Stationary Seat, Carbon Seal Face, 336958
Buna-N O-Rings. (INCN)
153 2
Mechanical Seal Complete -
Cast Iron Stationary Seat, PTFE O-Ring, 331973
Carbon Seal Face w/ PTFE Seal Ring. (IACT)
Mechanical Seal Complete -
Cast Iron Stationary Seat, Bronze Seal Face 336984
w/ FKM O-Rings. (IVBV)
O-Ring - Stationary (FKM) 711932
153D O-Ring - Stationary (Buna-N) 2 701945
O-Ring - Stationary (PTFE) 702090
O-Ring - Rotating (FKM) 701967
153L O-Ring - Rotating (Buna-N) 2 701933
Seal Ring - Rotating (PTFE) **
1
Included in Maintenance Kit
* * PTFE Rotating Seal Ring is not available as a separate part.

7-13
www.wertswelding.com
 Spec Sheet 201-002
Section: 201
Effective: May 2013
Replaces: June 2008

TXD1200 Series
High-Speed Sliding Vane Truck Pumps

How Blackmer’s sliding vane action works TXD2 Sliding Vane Pump

Reliability Applications
With pump speeds of up to 1,200 RPM, the durable, high-speed n Fuel oil delivery truck
TXD Series truck pumps provide fast and quiet operation, while the
n Fleet refueling
sliding vane design offers sustained performance and reliability.
n Aviation refuelers

Unique Features n Transport of:

Adjustable relief valve protects pump from excessive pressure. – Petro Chemicals
Optional air operated piston-style relief valve offers easy hose and – Gasoline
nozzle handling. T-type strainers are available to protect pumping – Diesel Fuel
systems from damage caused by welding slag and foreign matter – Biofuels
in the piping and tanks. – Home Heating Oil
– Solvents
Sizing Options – And many more
Available in 2, 2.5 and 3-inch port sizes with flow rates from TXD1200 models are equipped with FKM elastomers that make
20 to 265 U.S. gallons (4 to 60 m3/H) and pressures up to the pump ideal for handling all types of light petroleum products,
125 psi (8.6 bar). solvents and all Biodiesel and Ethanol blends.

7-14
 TXD1200 Series
High-Speed Sliding Vane Truck Pumps
Performance Data
Pump Model TXD1220 TXD1225 TXD1230
Rated Pump Speed 1100 800 1100 800 800 640
gpm 82 59 130 93 240 185
L/min 310 223 492 352 908 700
m3/h 18 13 29 21 54 42
hp 4.2 2.9 6.6 4.7 10.8 8.1
kW 3.1 2.1 4.9 3.5 8.0 6.0
* A ppropriate capacities and horsepower (HP) are based on a 100 ssu (22 cSt) fluid a 50 PSI (3.4 bar) delivered pressure
Refer to Characteristic Curves for flow rates and torque requirements at other pressures and viscosities.

Maximum Operating Limits

Nominal Flowrate Pump Speed Viscosity Differential Pressure Working Pressure Temperature
Pump Model
gpm L/min rpm ssu cSt psi bar psi bar ºF ºC
TXD1220 87 329 1200 100 22 125 8.6 175 12.1 300 149
TXD1225 157 594 1200 100 22 125 8.6 175 12.1 300 149
TXD1230 270 1,022 900 100 22 125 8.6 175 12.1 300 149

Pump Rotation
Blackmer TXD models are equipped with a
double-ended drive shaft for either clockwise
(RH) or counterclockwise (LH) rotation.

Port Sizes Options

n TXD1220 – 2" n Pneumatic Relief Valve
n TXD1225 – 2.5" n Hydraulic Motor Adapters
n TXD1230 – 3" n Strainers
n Victaulic Flanges

Dimensions
DD
Model A B D E G K M Q S T AA BB 11⁄4” HYD 1” HYD TT Approx. Wt.
Motor Motor
Shaft Shaft
in. 11⁄8 1⁄4 8 51⁄4 31⁄2 61⁄2 4 811⁄16 61⁄8 37⁄8 83⁄4 85⁄16 107⁄8 109⁄16 121⁄8 70 lbs
TXD1220
mm – – 203 133 89 165 102 221 156 98 222 211 276 268 308 32 kg
in. 11⁄8 1⁄4 8 3⁄4 6 4 7⁄8 7 4 9 5⁄8 6 13⁄16 3 15⁄16 9 1⁄2 8 11⁄16 11 5⁄8 11 5⁄16 13 5⁄16 94 lbs
TXD1225
mm – – 222 152 124 178 102 244 173 100 241 221 295 287 338 43 kg
in. 11⁄8 1⁄4 9 5⁄8 6 7⁄16 4 3⁄8 7 1⁄4 5 3⁄8 12 13⁄16 8 9⁄16 4 15⁄16 10 11⁄16 9 7⁄16 12 3⁄8 15 3⁄8 152 lbs
TXD1230
mm – – 244 164 111 184 137 325 217 125 271 240 314 391 69 kg

Distributed By:
Process | Energy | Military & Marine

World Headquarters
1809 Century Avenue SW, Grand Rapids, MI 49503-1530 USA
T 616.241.1611 F 616.241.3752 www.blackmer.com
Printed in USA © 2013 Blackmer
7-15
5/13 - 500
 961681 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-D03
PUMP MODELS: TXD1225A Section 201
Effective Dec 2008
Keep with Instructions 201-D00 for Installation, Operation and Maintenance Replaces June 2008

LOCKNUT
TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1
1 Cap – Relief Valve (R/V) 1 411453 26 Gasket – Bearing Cover 2 381406
2 Adjusting Screw – R/V 1 431401 27A Bearing Cover 2 041431
4 Cover – Relief Valve 1 411607 28 Capscrews – Bearing Cover 8 920285
1
5 Capscrew – R/V Cover 3 920316 35 Key – Shaft 1 909209
5A Capscrew w / Hole – R/V Cover 1 920310 42 Flanges
7 Spring Guide – R/V 1 423955 42A Gasket – Flange See
8 Spring – R/V (51-110 PSI) (Std.) 1 471631 42B Capscrews – Flange Backside
Spring – R/V (111-125 PSI) 471614 42C O-Ring – Victaulic Flanges
9 Valve – R/V – Standard 3 1 451623 72 O-Ring – Head (FKM) 2 701914
Valve – R/V – Nickel Plated 1 451624 73 Gage Plug 2 908198
1
10 Gasket – R/V Cover 1 531603 76 Grease Fitting 2 317815
12 Cylinder (Note Series 1200 ID mark) 1 021680 76A Grease Relief Fitting 2 701992
13A Rotor & Shaft Assembly2 1
1 261680 88 Gasket – R/V Cap 1 701981
1 1
14 Vane – Duravane 6 091619 104 Grease Seal 2 331918
1
20 Head 2 031425 123A Dirt Shield 2 701480
21 Capscrews – Head 16 920331 186 Shaft Protector 1 341601
1
24 Ball Bearing 2 903156 Air Valve Kit – Piston Type (FKM) 891716
1
24A Locknut Assembly w/setscrew 24C 2 903583 Tool - Locknut 903091
1
24B Lockwasher – Bearing 2 903522 Kit – Maintenance (TXD1225A) 899181
24C Setscrew – Locknut (in 24A) 2 924060
1
Included in Maintenance Kit 2 Includes Ref. Nos. 24A, 24B, & 24C 3 For Piston Style Air Operated RV see IOM 201-G00.

7-16
www.wertswelding.com
MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete -
1
153 Cast Iron Stationary Seat, Carbon Seal 2 331655
Face, FKM O-Rings. (IVCV)
153D O-Ring – Stationary (FKM) 2 701921
153L O-Ring – Rotating (FKM) 2 701980
1
Included in Maintenance Kit

FLANGES
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
42 Flange – 2" NPT 1–2 651603
Flange – 2 ½" NPT 651611
Flange – 2 ½" Weld 651608
Flange – 2" Victaulic 655116
Flange – 2 ½" Victaulic 655117
Flange – 3" Victaulic 655118
1
42A Gasket – Flange, NPT and Weld 0–2 381650
42B Capscrews – 2" NPT Flange 4–8 920471
Capscrews – 2 ½" NPT Flange 920532
Capscrews – 2 ½" Weld 920491
Capscrews – Victaulic Flanges 920491
42C O-Ring – Victaulic Flange (FKM) 0–2 701924

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

PART NO. PART NO.
PARTS
REF. 1-¼” 1”
PART NAME PER
NO. Hyd Motor Hyd Motor
PUMP
Shaft Shaft
Hydraulic Motor Adapter Kit 891458 891205
Gasket –
26A 1 383940 383940
Hydraulic Motor Adapter
Capscrew –
28A 4 920369 920369
Hydraulic Motor Adapter / Head
Coupling w/ Setscrew –
34 1 906967 906966
for straight key hyd. motor shaft
35 Key – Coupling 1 909184 N/A
76 Grease Fitting 1 317815 317815
76A Grease Relief Fitting 1 701992 701992
Hydraulic Motor Adapter –
135 1 041828 041827
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510

7-17
www.wertswelding.com
 961881 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-D04
PUMP MODEL: TXD1230A Section 201
Effective Oct 2008
Keep with Instructions 201-D00 for Installation, Operation and Maintenance Replaces New

LOCKNUT TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1
1 Cap – Relief Valve (R/V) 1 413957 24B Lockwasher - Bearing 2 903524
2 Adjusting Screw – R/V 1 431808 24C Setscrew – Locknut (in 24A) 2 924060
1
3 Locknut – Adjusting Screw 1 922923 26 Gasket – Bearing Cover 2 381817
4 Cover – R/V 1 411807 27A Bearing Cover 2 041815
5 Capscrew – R/V Cover 3 920331 28 Capscrews – Bearing Cover 12 920285
1
5A Capscrew w / Hole – R/V Cover 1 920330 35 Key – Shaft 1 909178
7 Spring Guide – R/V 1 421805 42 – Flanges, Flange Gaskets / Orings, See
8 Spring – R/V (51-110 psi)(Std.) 1 471806 42C and Flange Capscrews Backside
1
Spring – R/V (111-125 psi) 471809 72 O-Ring - Head (FKM) 2 711938
9 Valve - R/V (Std.) 1 451807 73 Gage Plug 2 908198
Valve - R/V (Nickel Plated) 451808 76 Grease Fitting 2 317815
1
10 Gasket – R/V Cover 1 531803 76A Grease Relief Fitting 2 701992
1
12 Cylinder (Note Series 1200 ID mark) 1 021880 77 Push Rod 3 125110
1
13A Rotor & Shaft Asy. - Double Ended 2 1 261881 88 Gasket - R/V Cap 1 533908
1 1
14 Vane – Duravane 6 091819 104 Grease Seal 2 331908
20 Head 2 031815 186 Shaft Protector 1 341801
21 Capscrews – Head 20 920369 Air Valve Kit 891798
1
24 Ball Bearing 2 903172 Tool - Locknut 903091
24A Locknut – Bearing (Includes 24C) 2 903582 Kit – Maintenance (TXD1230A) 899182
1 2
Included in Maintenance Kit Includes ref. Nos. 24A, 24B & 24C

7-18
www.wertswelding.com
MECHANICAL SEALS
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
Mechanical Seal Complete
153 Cast Iron Stationary Seat, FKM O-Rings, 2 331883
Carbon Seal Face. (IVCV)
153D O-Ring - Stationary (FKM) 2 711931
153L O-Ring - Rotating (FKM) 2 701962
1
Included in Maintenance Kit

FLANGES
PARTS
REF. PART
PART NAME PER
NO. NO.
PUMP
42 Flange – 3" NPT 1–2 651803
Flange – 3" Weld 655102
Flange – 3" Victaulic 655120
1
42A Gasket – Flange, NPT and Weld 0–2 381816
42B Capscrews – NPT Flange 4–8 920532
Capscrews – Weld & Victaulic Flange 920510
42C O-Ring – Victaulic Flange (FKM) 0–2 711931

OPTIONAL HYDRAULIC MOTOR ADAPTER

REF. PART NAME PARTS PART
NO. PER NO.
PUMP
Hydraulic Motor Adapter Kit * 895140
26A Gasket – Hydraulic Motor Adapter 1 381817
28A Capscrew – 6 920369
Hydraulic Motor Adapter / Head
34 Coupling w/ Setscrew – 1 906967
for 1.25” straight key hydraulic motor
35 Key – Coupling 1 909184
76 Grease Fitting 1 317815
76A Grease Relief Fitting 1 701992
135 Hydraulic Motor Adapter – 1 041831
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510

7-19
www.wertswelding.com
 Call us for all
of your
Diesel Exhaust Fluid
needs!

Let us help you

find the right pump
for the job!

7-20
www.wertswelding.com
 Spec Sheet 203-003
Section: 203
Effective: March 2012
Replaces: May 2011

STX DEF Series

Stainless Steel Transport Pumps for Diesel Exhaust Fluid (DEF)

STX2A-DEF & STX1220A-DEF STX3-DEF

Design Benefit
Blackmer’s STX DEF Series pumps meet or exceed all Blackmer’s STX3-DEF offers fast fluid off-loading. A typical
industry specifications for DEF Aqueous Urea Solutions off-loading of a 6,000 gallon (22,700 liter) tanker can be
(AUS32). Made from 316 stainless steel, the pumps feature unloaded as quickly as 24 minutes.
external ball bearings, non-metallic Duravanes, PTFE Blackmer’s non-metallic vanes self-compensate for wear
elastomers and Blackmer chemical mechanical seals. The and allow the STX DEF Series pumps to run dry for short
design also includes an adjustable relief valve, weld flanges periods of time for self-priming and blowing lines clean,
and self-priming capability. The STX3-DEF has a versatile with out pump damage.
mounting bracket.
The STX DEF Series is designed to offer easy maintenance
because the internal wear is limited almost completely
Application to the sliding vanes, which can be replaced with ordinary
Applications include DEF transport and railcar loading and hand tools.
off-loading, as well as DEF tote filling.
The STX3-DEF offers flow rates up to 250 gpm (946 L/min)
with differential pressures up to 125 psi (8.6 bar) and How Blackmer’s sliding vane action works
maximum speed of 800 rpm. The STX1220A-DEF offers
flow rates up to 92 gpm (348 L/min) and maximum speed
of 1,200 rpm, and the STX2A-DEF provides flow rates to
60 GPM (227 L/min) and maximum speed of 780 rpm.

7-21
www.wertswelding.com
Characteristic Flow Rates Pump Horsepower Requirements
Pump Capacity @ Maximum Fluid Pump 30 ssu 50 ssu
Pump
Pump 50 psid (3.45 bar) with Viscosity at Pump Speed (1 cSt) Viscosity (13 cSt) Viscosity
Speed
Model 30 ssu (1 cSt) Fluid rpm Shown Model 50 psi 100 psi 50 psi 100 psi
rpm
rpm US gpm L/min m3⁄h ssu cSt (3.45 bar) (6.9 bar) (3.45 bar) (6.9 bar)
780 50 189 11.3 30 1 780 2.4 4.3 – –
STX2A-DEF 520 30 113 6.8 1,000 210 STX2A-DEF 520 1.5 2.9 1.7 3.1
350 16 60 3.6 4,600 970 350 1 1.9 1.1 2.1
1,200 82 310 18 100 22 1,200 4.0 6.9 4.2 7.3
STX1220A- STX1220A-
1,000 72 273 16 100 22 1,000 3.4 5.6 3.6 6.0
DEF DEF
700 49 185 11 100 22 700 2.3 3.8 2.4 4.1
800 250 946 57 500 105 800 9.5 17.5 9.8 17.9
STX3-DEF 600 190 719 43 5,000 1,050 STX3-DEF 600 6.7 12.8 6.9 13.2
400 125 473 28 20,000 4,250 400 4.2 8.0 4.3 8.3
Refer to Blackmer Characteristic Curves for flow rates and torque requirements for your
specific conditions.

Maximum Operating Limits

Pump Differential
Nominal Flow Rate Viscosity Temperature
Pump Model Speed Pressure
STX1220A-DEF & STX2A-DEF
US gpm L/min m3 ⁄h rpm ssu cSt psi bar °F °C
STX2A-DEF 60 227 13.6 780 4,600 970 125 8.6 240 115
STX1220A-DEF 92 348 21 1,200 100 22 125 8.6 240 115
STX3-DEF 250 946 57 800 20,000 4,250 125 8.6 240 115

Pump Dimensions
DD
1" Approx.
Pump Model A B D E G K M Q S T AA BB 11⁄4" HYD 
HYD  TT Weight
Motor
Motor
Shaft
Shaft

STX2A-DEF & in. 11⁄8 ⁄4

1
8 51⁄4 31⁄2 61⁄2 4 811⁄16 61⁄8 37⁄8 83⁄4 85⁄16 107⁄8 109⁄16 121⁄8 70 lbs. STX3-DEF
STX1220A-
DEF mm – – 203 133 89 165 102 221 156 98 222 211 276 268 308 32 kg
Approx.
Pump Model A B C D E F G H J K L M N P
Weight
in. – – 2 1⁄8 9 1⁄8 5 11 1⁄8 61⁄8 6 1⁄4 5 1⁄4 33⁄4 5 3⁄8 8 4 5⁄8 21⁄4 132 lbs.
STX3-DEF
mm 35 10 54 242 127 283 155 159 133 95 137 203 118 57 60 kg

Pump Rotation
Blackmer’s STX pump models
are equipped with a double-
ended straight-keyed drive
shaft for either clockwise (RH)
or counterclockwise (LH) rotation.

Process | Energy | Military & Marine

7-22
www.wertswelding.com 3/12 - 1M
 BLACKMER PARTS LIST 961830 PARTS LIST
Page 1 of 2 203-A03
MODELS: STX1220A , STX1220A-DEF 1 Section 203
Effective Mar 2014
Keep with Instructions 203-A00 for Installation, Operation and Maintenance Replaces Mar 2012

LOCKNUT TOOL

PARTS PARTS
REF. PART REF.
DESCRIPTION PER DESCRIPTION PER PART NO.
NO. NO. NO.
PUMP PUMP
1 Cap – Relief Valve (R/V) 1 413151 24C Setscrew – Locknut 2 924060
2 Adjusting Screw – R/V 1 432220 26 Gasket – Bearing Cover 2 381406
4 Cover – R/V 1 412220 27 Bearing Cover 0–1 042220
5 Capscrew – R/V Cover 4 920335 28 Capscrew – Bearing Cover 12 920293
7 Spring Guide – R/V 1 423101 35 Key – Shaft 1 909209
8 Spring – R/V (51- 75 psi) 1 471418 42 Flange – 2” Weld 2 651433
Spring – R/V (76 –110 psi) 471427 42A O-Ring – Flange, PTFE 2 702056
Spring – R/V (111-125 psi) 471429 42B Capscrew – Flange 8 920365
9 Valve – R/V 1 452200 72 O-Ring – Head,, PTFE 2 712007
10 O-Ring – R/V Cover, PTFE 1 711999 73 Plug – ¼” NPT 4 908192
12 Cylinder 1 022220 76 Grease Fitting 2 317815
13 Rotor & Shaft 1 262220 76A Grease Relief Fitting 2 701992
14 Vane – Duravane 4 091419 88 Seal Ring – R/V Cap, PTFE 1 533101
20 Head 2 032220 104 Oil Seal 2 331918
21 Capscrew – Head 20 920335 123A Dirt Shield 2 701480
24 Bearing 2 903156 153 Mechanical Seal 2 See back
24A Locknut w/setscrew 2 903583 186 Shaft Protector 1 341601
24B Lockwasher 2 903522 Tool – Locknut 903091
1
STX1220A-DEF model requires special cleaning/testing. Consult factory if not familiar with these procedures.

7-23
www.wertswelding.com
MECHANICAL SEAL

PARTS
REF.
DESCRIPTION PER PART NO.
NO.
PUMP
Mechanical Seal Complete – Silicon
Carbide Stationary Seat, PTFE O-
153 2 332221
Ring, Custom Carbon Rotating Seal
Face with PTFE Seal Ring (LACT)
153D O-Ring – Stationary (PTFE) 2 702056
153L O-Ring – Rotating (PTFE) 2 702109

OPTIONAL HYDRAULIC MOTOR ADAPTER

PART NO. PART NO. PART NO.
PARTS
REF. 1-¼” 1” 1” H-Series
PART NAME PER
NO. Hyd Motor Hyd Motor Hyd Motor
PUMP
Shaft Shaft Shaft
See Hydraulic Motor See
891458 891205 891464
Below Adapter Kit * Below
Gasket – Hydraulic Motor
26A 1 383940 383940 383940
Adapter
Capscrew – Hydraulic Motor
28A 4 920369 920369 920369
Adapter / Head
Coupling w/ Setscrew – for
34 1 906967 906966 906966
straight key hyd. motor shaft
35 Key – Coupling 1 909184 N/A N/A
76 Grease Fitting 1 317815 317815 317815
76A Grease Relief Fitting 1 701992 701992 701992
Hydraulic Motor Adapter –
135 1 041828 041827 041807
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510 920510

7-24
www.wertswelding.com
 BLACKMER PARTS LIST 961829 PARTS LIST
Page 1 of 2 203-A04
MODELS: STX2A , STX2A-DEF 1 Section 203
Effective Mar 2014
Keep with Instructions 203-A00 for Installation, Operation and Maintenance Replaces Mar 2012

LOCKNUT TOOL

PARTS PARTS
REF. PART REF.
DESCRIPTION PER DESCRIPTION PER PART NO.
NO. NO. NO.
PUMP PUMP
1 Cap – Relief Valve (R/V) 1 413151 24C Setscrew – Locknut 2 924060
2 Adjusting Screw – R/V 1 432220 26 Gasket – Bearing Cover 2 381406
4 Cover – R/V 1 412220 27 Bearing Cover 0–1 042220
5 Capscrew – R/V Cover 4 920335 28 Capscrew – Bearing Cover 12 920293
7 Spring Guide – R/V 1 423101 35 Key – Shaft 1 909209
8 Spring – R/V (51- 75 psi) 1 471418 42 Flange – 2” Weld 2 651433
Spring – R/V (76 –110 psi) 471427 42A O-Ring – Flange, PTFE 2 702056
Spring – R/V (111-125 psi) 471429 42B Capscrew – Flange 8 920365
9 Valve – R/V 1 452200 72 O-Ring – Head,, PTFE 2 712007
10 O-Ring – R/V Cover, PTFE 1 711999 73 Plug – ¼” NPT 4 908192
12 Cylinder 1 022220 76 Grease Fitting 2 317815
13 Rotor & Shaft 1 262221 76A Grease Relief Fitting 2 701992
14 Vane – Duravane 4 091419 77 Pushrod 2 123907
20 Head 2 032220 88 Seal Ring – R/V Cap, PTFE 1 533101
21 Capscrew – Head 20 920335 104 Oil Seal 2 331918
24 Bearing 2 903156 123A Dirt Shield 2 701480
24A Locknut w/setscrew 2 903583 153 Mechanical Seal 2 See back
24B Lockwasher 2 903522 186 Shaft Protector 1 341601
Tool – Locknut 903091
1
STX2A-DEF model requires special cleaning/testing. Consult factory if not familiar with these procedures.

7-25
www.wertswelding.com
MECHANICAL SEAL

PARTS
REF.
DESCRIPTION PER PART NO.
NO.
PUMP
Mechanical Seal Complete – Silicon
Carbide Stationary Seat, PTFE O-
153 2 332221
Ring, Custom Carbon Rotating Seal
Face with PTFE Seal Ring (LACT)
153D O-Ring – Stationary (PTFE) 2 702056
153L O-Ring – Rotating (PTFE) 2 702109

OPTIONAL HYDRAULIC MOTOR ADAPTER

PART NO. PART NO. PART NO.
PARTS
REF. 1-¼” 1” 1” H-Series
PART NAME PER
NO. Hyd Motor Hyd Motor Hyd Motor
PUMP
Shaft Shaft Shaft
See Hydraulic Motor See
* 891458 891205 891464
Below Adapter Kit Below
Gasket – Hydraulic Motor
26A 1 383940 383940 383940
Adapter
Capscrew – Hydraulic Motor
28A 4 920369 920369 920369
Adapter / Head
Coupling w/ Setscrew – for
34 1 906967 906966 906966
straight key hyd. motor shaft
35 Key – Coupling 1 909184 N/A N/A
76 Grease Fitting 1 317815 317815 317815
76A Grease Relief Fitting 1 701992 701992 701992
Hydraulic Motor Adapter –
135 1 041828 041827 041807
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510 920510

7-26
www.wertswelding.com
 BLACKMER PARTS LIST 961822 PARTS LIST
Page 1 of 2 203-A01
MODEL: STX3, STX3-DEF 1 Section 203
Effective Dec 2013
Keep with Instructions 203-A00 for Installation, Operation and Maintenance Replaces June 2010

LOCKNUT TOOL

PARTS PARTS
REF. PART REF. PART
DESCRIPTION PER DESCRIPTION PER
NO. NO. NO. NO.
PUMP PUMP
1 Cap – Relief Valve (R/V) 1 413151 30 Capscrew – Foot Bracket 4 924071
2 Adjusting Screw – R/V 1 433101 30A Lockwasher – Bracket (12 mm STS) 4 909586
4 Cover – R/V 1 415301 32 Mounting Bracket 1 832225
5 Capscrew – R/V Cover 4 924036 35 Key – Shaft (10mm Metric) 1 909146
7 Spring Guide – R/V 1 423101 Key – Shaft (5/16” Domestic) 909206
8 Spring – R/V (51- 75 psi) 1 471632 42 Flange – 3” Weld 2 652201
Spring – R/V (76 –110 psi) 471632 42A O-Ring – Flange, PTFE 2 702101
Spring – R/V (111-125 psi) 471615 42B Capscrew – Flange 8 924071
9 Valve – R/V 1 455301 72 O-Ring – Head,, PTFE 2 702210
10 O-Ring – R/V Cover, PTFE 1 702079 73 Plug – ¼” BSPP Hex Head 3 908201
12 Cylinder 1 022225 73A Pipe Plug – ¼” NPT Socket Head 2 908192
13 Rotor & Shaft 1 262225 73B Plug – Weep Hole 4 340000
14 Vane – Duravane 6 094500 73C Gasket 3 533101
20 Head 2 032227 76 Grease Fitting 2 317815
21 Capscrew – Head 20 924036 76A Grease Relief Fitting 2 701992
24 Bearing 2 903172 77 Push Rod 3 122225
24A Locknut w/setscrew 2 903582 88 Seal Ring – R/V Cap, PTFE 1 533101
24B Lockwasher 2 903524 104 Oil Seal 2 331908
24C Setscrew – Locknut 2 924060 153 Mechanical Seal 2 332260
26 Gasket – Bearing Cover 2 381817 186 Shaft Protector 1 341801
27 Bearing Cover 0 – 1 042225 Tool – Locknut 903091
28 Capscrew – Bearing Cover 12 924031
1
STX3-DEF model requires special cleaning/testing. Consult factory if not familiar with these procedures.
7-27
www.wertswelding.com
 MECHANICAL SEAL

PARTS
REF.
DESCRIPTION PER PART NO.
NO.
PUMP
Mechanical Seal Complete – Silicon
Carbide Stationary Seat, PTFE O-
153 2 332260
Ring, Custom Carbon Rotating Seal
Face with PTFE Seal Ring (LACT)
153D O-Ring – Stationary (PTFE) 2 702080
153L Seal Ring – PTFE 2 **
** 153L PTFE Seal Ring is not available as a separate part.

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

PARTS
REF.
PART NAME PER PART NO.
NO.
PUMP
--- Hydraulic Motor Adapter Kit * See Below 892228
26A Gasket – Hydraulic Motor Adapter 1 381817
Capscrew –
28A 6 924037
Hydraulic Motor Adapter / head
Coupling w/ Setscrew –
34 1 906969
1.25” straight key hyd. motor shaft
35 Key – Coupling 1 909184
76 Grease Fitting 1 317815
76A Grease Relief Fitting 1 701992
Hydraulic Motor Adapter –
135 1 041829
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510

7-28
www.wertswelding.com
 Spec Sheet 205-001
Section: 205
Effective: September 2012
Replaces: October 2005

Transmax TX206A
Sliding Vane Transport Pumps

Hydraulic Drive

How Blackmer’s sliding vane action works

PTO Drive

Design Benefit
The unique open rotor design makes the Transmax highly The Transmax is self-priming and capable of line clearing;
versatile. The sliding vane design provides sustained these benefits are not found with existing gear pumps.
high-performance capabilities including self-priming Also, the Transmax is specifically designed for easy cleaning.
and line clearing. Multiple drain ports allow for proper flushing in a variety of
mounting positions.
Application
The TX206A is capable of pumping thin to thick
Hydraulic Drive Options
liquids from 30 to 50,000 ssu (7 to 10,500 cP) Blackmer offers fully-integrated hydraulic drive systems
with sustained performance at rated P.T.O. speeds, including pumps, motors, close coupled hydraulic motor
maximum 800 rpm. adapters, control valves, P.T.O.’s and coolers.

7-29
www.wertswelding.com
 Transmax TX206A
Sliding Vane Transport Pumps
Characteristic Flow Rates at 75 psi (5.2 bar)
Speed 100 ssu (22 cSt) 10,000 ssu (2,157 cSt) 50,000 ssu (10,500 cSt)
Pump Model
rpm gpm L/min gpm L/min gpm L/min
400 94 355 104 393 101 382
500 122 461 131 495 126 477
TX206A 600 147 556 157 594 152 575
700 174 658 184 696 169 639
800 203 768 206 780 – –
Note: Optional materials of construction may be required to meet specific application requirements – please refer to Blackmer Material of Construction pages.
For operating limits that exceed those listed – consult factory.
*Standard construction rated at 150°F (66°C).

Optional Pipe Flanges Sales Information and Equipment Application Assistance

Pump Model Description Blackmer has a world wide distribution network to assist you in specifying any of our
3” NPT
family of pumps, compressors and other equipment for your application.
TX206A
3” Weld For more information, or to find the distributor nearest to you, please contact us at
the telephone, fax or internet address listed below.

Maximum Operating Limits

Nominal Flow Rate Pump Speed Viscosity Differential Pressure Working Pressure Temperature
Pump Model
gpm L/min rpm ssu cSt psi bar psi bar ºF ºC
TX206A 206 780 800 50,000 10,500 125 8.62 175 12.06 300 149

Pump Dimensions
Pump Model A B D E G K Q S T Y DD EE FF Weight
in. 11⁄4 5⁄16 8 11⁄16 10 5⁄8 5 7⁄8 9 3⁄8 12 3⁄8 10 5 1⁄8 1 1⁄4 11 3⁄16 6 7⁄16 9 9⁄16 146 lbs
TX206A
mm – – 221 270 149 238 314 254 130 32 284 164 243 66 kgs

Keyed Shaft and Hydraulic Drive Option Splined Shaft Hydraulic Drive Option
(left hand rotation only)

Process | Energy | Military & Marine

7-30
www.wertswelding.com
 961817 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 205-B01
PUMP MODEL: TX206A Section 205
Effective Sept 2009
Keep with Instructions 205-B00 for Installation, Operation and Maintenance Replaces Sept 2007

LOCKNUT TOOL

Parts Parts
Ref. Ref.
Description per Part No. Description per Part No.
No. No.
Pump Pump
1 Cap – Relief Valve (R/V) 1 413957 27 Bearing Cover – Outboard, Splined Shaft 0-1 041817
2 Adjusting Screw – R/V 1 431808 27A Bearing Cover 1-2 041815
3 Locknut – Adjusting Screw 1 922923 28 Capscrew – Bearing Cover 12 920285
4 Cover – R/V 1 411807 35 Key – Shaft 1 909184
5 Capscrew – R/V 4 920331 Flange – 3” NPT - Std. 651803
42 2
7 Spring Guide – R/V 1 421805 Flange – 3” Weld 655102
8 SS Spring - R/V (76 -110 psi)-Std 1 471807 42A Gasket – Flange 2 381816
SS Spring - R/V (111-125 psi) 471808 Capscrews – NPT Flange 920532
42B 8
9 Valve – R/V (Plated) 1 451808 Capscrews – Weld Flange 920510
10 Gasket – R/V Cover 1 531803 O-Ring – Head (FKM) - Std. 702121
72 2
12 Cylinder 1 021821 O-Ring – Head (PTFE) 702235
13 Rotor & Shaft (DE Keyed) 1 1 261830 73 Plug – ¼” NPT 6 908198
13A Splined SE Rotor & Shaft - LH Only 1 261831 76 Grease Fitting 2 317815
14 Vane – Duravane 6 091819 76A Grease Relief Fitting 2 701992
20 Head 2 031872 77 Push Rod 3 121813
21 Capscrew – Head 20 920331 88 Seal Ring – R/V Cap 1 533908
24 Bearing 2 903172 104 Oil Seal 2 331908
24A Locknut 2 903523 152 Lip Seal Assembly -Std. 2 335221
24B Lockwasher 2 903524 186 Shaft Protector 0-1 341801
26 Gasket – Bearing Cover 2 381817 Tool – Locknut 903091
Hydraulic Motor Adapter Kit (SAE A) See Backside
1
Includes 24A and 24B.

7-31
www.wertswelding.com
LIP SEAL - STANDARD
Parts
Ref.
Part Name Per Part No.
No.
Pump
152 Lip Seal Complete 2 335221
152A Lip Seal– Stationary (Turcon) 2 331759
152B Housing - Lip Seal 2 335222

MECHANICAL SEAL - OPTIONAL

Parts
Ref.
Part Name Per Part No.
No.
Pump
Mechanical Seal Complete – Cast Iron
153 Stationary Seat, Carbon Seal Face, FKM 2 331883
O-Rings. – IVCV
153D O-Ring – Stationary (FKM) 2 711931
153L O-Ring – Rotating (FKM) 2 701962

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

PART
PARTS PART NO.
REF. NO.
PART NAME PER SPLINED
NO. STD
PUMP SHAFT
SHAFT
See See
Hydraulic Motor Adapter Kit * 895141 895142
Below Below
26A Gasket – Hydraulic Motor Adapter 1 381817 381817
Capscrew –
28A 6 920331 920331
Hydraulic Motor Adapter / Head
Coupling w/ Setscrew –
906970 N/A
1.25” straight key
34 1
Coupling –
N/A 906009
1.25”, 14 Point Splined Shaft
35 Key – Coupling 1 909184 N/A
76 Grease Fitting 1 317815 317815
76A Grease Relief Fitting 1 701992 701992
Hydraulic Motor Adapter –
135 1 041806 041803
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510 920510

7-32
www.wertswelding.com
 TLGLF3 & TLGLF4 Pumps
Flange Mounted Pumps for Bobtails and Transports
Blackmer TLGLF3 and TLGLF4 pumps are designed to flange mount directly to
a commercial internal control valve, in combination with the tank of a bobtail
or transport. Direct mounting eliminates the need for inlet pipes, shut-off valve
and external strainer which can restrict flow and cause vaporization problems.
The result is smoother operation and longer pump life.
Both models are equipped with a double-ended drive shaft for clockwise or
counterclockwise rotation by simply changing position of the pump. Each
model also has an auxiliary intake port which can be used for emergency
unloading of another tank or transport. In addition, these pumps have an
internal relief valve, patented cavitation suppression liners to reduce noise,
vibration and wear.
Standard construction materials for both models include Buna-N mechanical
TLGLF3 cutaway seals and Duravanes for handling both LP gas and anhydrous ammonia. The
casing liner and end discs are replaceable for easy rebuilding of the pumping
chamber if ever necessary.
The TLGLF3 is widely used on bobtails because of its compact mounting
arrangement, with a 3-inch ANSI intake flange and 2-inch auxiliary intake and
discharge ports. Capacities range from 60 to 129 U.S. gpm (227 to 488 L/min).
The TLGLF4 offers maximum output rates, and fast turnaround time for
transports. It is designed with 4-inch ANSI intake flange, a 3-inch auxiliary intake
port, and twin 2-inch discharge ports which permit the use of two hoses, if
necessary, to reduce pressure loss when unloading into restrictive receiving
systems. Capacities range from 200 to 350 U.S. gpm (757–1,325 L/min).
TLGLF4 cutaway Maximum differential pressure for both models is 125 psi (8.62 bar).

Cavitation Suppression Liners Reduce Noise

Blackmer TLGLF pumps feature noise suppression
liners. This patented technology reduces noise at its
source by reducing the amount of cavitation in the
pump. Reducing the cavitation level also reduces
vibration and wear.
The sudden collapse of vapor bubbles inside
the pump is known as cavitation. By allowing a
controlled amount of fluid at discharge pressure
to bleed back toward the suction of the pump, the vapor bubbles are collapsed over a
longer period time. The net result is less noise, less vibration and less wear.
As shown in the chart, the reduction in noise level can be quite dramatic. Similar noise
reductions have been measured in the TLGLF4 pumps.
Patent number: 6,030,191

Hydraulic Drive Packages

Blackmer offers complete Hydraulic Drive packages for all LPG mobile applications. The Hydrive cooler by Mouvex®, a Dover® Company, forms
the heart of the system. The stainless steel cooler offers up to 26 HP (19.4 kW) of actual heat dissipation. Hydraulic motor adapter kits are
available for all Blackmer LPG mobile pumps.

7-33
www.wertswelding.com
Selection Data
Pump delivery and brake horsepower requirements are listed in the table below for various
differential pressures. The same data for all pressures is provided in the performance curves below.

Maximum Maximum
Approximate Delivery of Propane at Differential Pressures
Standard Pump Differential Working
and Pump Speeds Shown1
Pump Pressure Pressure2
Speed 50 psi (3.45 bar) 100 psi (6.89 bar)
Factory rpm
Model Relief Valve Torque Torque psi bar psi bar
gpm L/min BHp kW gpm L/min BHp kW
Setting ft-lb Kg-m ft-lb Kg-m
870 129 488 6.5 4.8 45.9 6.3 119 450 10.9 8.1 72.5 10 125 8.62 350 24.13
800 118 446 5.1 3.8 44.2 6.1 107 405 8.7 6.5 69.7 9.6 125 8.62 350 24.13
150 psi 650 93 352 4.3 3.2 40.4 5.6 83 314 7.9 5.9 63.7 8.8 125 8.62 350 24.13
TLGLF3
(10.34 bar) 600 85 322 4 3 39.3 5.4 75 284 7.1 5.3 62.2 8.6 125 8.62 350 24.13
500 70 265 3.6 2.7 37.4 5.2 68 257 6 4.5 61.5 8.5 125 8.62 350 24.13
400 52 197 2.8 2.1 36.2 5 40 151 4.8 3.6 60.8 8.4 125 8.62 350 24.13
800 350 1,325 22 16 143 20 306 1,158 34 25 223 31 125 8.62 350 24.13
650 280 1,060 15.5 11.6 125.2 17.3 245 927 25.0 18.6 201.9 27.9 125 8.62 350 24.13
150 psi
TLGLF4 600 260 984 14.3 10.7 125.1 17.3 220 833 23.0 17.2 201.3 27.8 125 8.62 350 24.13
(10.34 bar)
500 210 795 11.9 8.9 125.0 17.3 170 644 19.0 14.2 199.5 27.6 125 8.62 350 24.13
400 160 606 9.5 7.1 124.7 17.2 120 454 15.2 11.3 199.5 27.6 125 8.62 350 24.13
1 Check the pump’s delivery and brake horsepower requirements in the performance curves below. See footnote with the curves which explains the factors that can cause delivery to vary.
2 Maximum rated working pressure is 350 psi (24.13 bar) for LPG and NH3 (limited by U.L. and N.F.P.A. 58).
Note: Refer to back cover for external bypass valve information.

Performance Curves Available Companion Flanges

TLGLF3 TLGLF4
and Flanged Elbows
TLGLF3 TLGLF4
160 RPM RPM
U.S. GAL / MIN.

500 400
U.S. GAL / MIN.

Standard
LITERS / MIN.

120 870 1200

LITERS / MIN.

400 800 300 800 Discharge Auxiliary Intake Intake

300 80 650
600
800 200
640
520
Pump
200 40 500 400 420
100
0 400 100 350 2” NPT Flanged
0
0 0 2” NPT Flanged
870 40
Elbow
800
12 2” NPT Flanged
800
36 2” NPT Flanged Elbow 3”
10 32 Elbow
650
640
300 lb.
2” Weld Flanged
BRAKE HP REQUIRED

BRAKE HP REQUIRED

600 28
8 TLGLF3 2” Weld Flanged ANSI
500 24 520 Elbow
Mounting
6 20 420 2” Weld Flanged
400
16 350 2” Weld Flanged Elbow Flange
Elbow
4 12 Twin 2” NPT
8 Blanking Flange
2 Flanges
4
0
Twin 2” NPT
0 20 40 60 80 100 120
0
0 20 40 60 80 100 120 3” NPT Flanged
Flanges
DIFFERENTIAL PRESSURE PSI DIFFERENTIAL PRESSURE PSI 4”
Twin 2” Weld 300 lb.
0 2 4 6 8 0 2 4 6 8 3” Weld Flanged
BAR BAR TLGLF4 Flanges ANSI
Twin 2” NPT Mounting
NOTE: Blackmer Characteristic Curves are based on Brake Horsepower (BHp). To determine Motor Horsepower, drive train inefficiencies Blanking Flange
must be added to the BHp. Flanges Flange
These curves are based on approximate delivery rates when handling propane or anhydrous ammonia at 80ºF (26.7ºC). Line restrictions Twin 2” NPT
such as excess flow valves, elbows, etc., will adversely effect deliveries. For propane at 32ºF (0ºC), actual delivery will be further reduced 4” Weld Flanged
Flanges
to about 80% of nominal. Delivery of butane at 80ºF (26.7ºC) will be 60 to 70% of these values, and may run as low as 35 to 45% at
32ºF (0ºC). This loss of delivery is not a pump characteristic but is caused by natural thermodynamic phenomena of liquefied gases.

LPG Pump Warranty – One Year Performance Assurance

Should any Blackmer LPG pump (LGL, TLGL, LG and LDF models) This offer is limited to one claim per installation.
or bypass valve fail in the transfer of propane, butane and PLEASE NOTE: For the One Year Performance Assurance to be valid, a
propane/butane mixture within one (1) year of the original Blackmer Pump Warranty Registration must be supplied to Blackmer
installation or eighteen (18) months after shipment from the factory, via web registration or postcard.
regardless of cause (except for intentional or gross misuse), free
For additional information, see Blackmer LPG Pump Warranty
replacement components will be provided to return the pump to
page #001-004.
as new performance.

7-34
www.wertswelding.com 3
 962011 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 501-E03
PUMP MODEL: TLGLF4B Section 501
Effective Jun 2011
Keep with 501-E00 for Installation, Operation and Maintenance Instructions Replaces Jan 2010

LOCKNUT
TOOL

Parts Parts
Ref. Ref.
Description Per Part No. Description Per Part No.
No. No.
Pump Pump
1 Cap - Relief Valve (R/V) 1 413957 42A O-Ring – Aux. Inlet Flanges 1 701937
2 Adjusting Screw - R/V 1 436310 42B Capscrew - 3" NPT Flange 4 920663
3 Locknut - Adjusting Screw 1 432039 Capscrew - 3", 4" 920640
4 Cover - R/V 1 412001 Weld Flange; Blank Flange
5 Capscrews - R/V Cover 4 920663 TWIN DISCHARGE PORT OPTIONS
7 Spring Guide - R/V 1 426355 43 Flange - 2" NPT 2 652010
1
8 Spring - R/V 1 472039 Flange - 2" Slip-on Weld 652024
1
9 Valve - R/V 1 452001 43A O-Ring - 2" Discharge Flanges 2 702004
1
10 O-Ring - R/V Cover 1 701946 43B Capscrew - Discharge Flange 8 920491
1
12 Casing 1 012041 71 Disc 2 062039
2 2
13 Rotor & Shaft Asy. 1 262041 71A Machine Screw - Disc 8 920015
2
(includes Ref. No. 24A & 24B) 71B Lockwasher - Machine Screw 8 909634
1 1
14 Vane - Duravane 6 092019 72 O-Ring - Head 2 702039
20 Head 2 032041 73 Gage Plug 2 908198
2
21 Capscrews - Head 28 920532 74 Key - Liner 1 182040
1
24 Ball Bearing 2 903166 76 Grease Fitting 2 317815
2
24A Locknut - Bearing 2 903541 76A Grease Relief Fitting 2 701992
1 1
24B Lockwasher - Bearing 2 903542 77 Push Rod - Composite 3 122009
1 1
26 Gasket - Bearing Cover 2 385125 88 O-Ring - R/V Cap 1 701926
1
27 Bearing Cover 2 041815 104 Grease Seal 2 331908
28 Capscrews - Bearing Cover 12 920285 186 Shaft, Protector 1 341801
1
35 Key - Shaft 1 909183 Tool - Locknut 903092
2
41 Liner 1 182000 Kit – Maintenance 898922
AUXILIARY INLET OPTIONS Kit – Rebuild 899022
42 Flange - 3" NPT 1 652012
Flange - 4" Weld 652005 1
Included in Maintenance Kit and Rebuild Kit
2
Flange - 3" Weld 652007 Included in Rebuild Kit
Flange - Blank 652000

7-35
www.wertswelding.com
MECHANICAL SEAL
Parts
Ref.
Part Name Per Part No.
No.
Pump
1
153 Mechanical Seal Assembly 2 332050
153A Stationary Seat (Hardened Steel) 2 **
153B Seal Face (Carbon) 2 **
153C Jacket Assembly 2 **
153D O-Ring - Stationary (Buna-N) 2 701934
153E O-Ring - Rotating (Buna-N) 2 711912
1
Included in Maintenance Kit and Rebuild Kit
** NOTE: Mechanical Seal Assy. (Ref. 153) is only sold as a complete assembly.
Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

Parts
Ref.
Part Name Per Part No.
No.
Pump
See See
Hydraulic Motor Adapter Kit 892037
Below Below
26A Gasket – Hydraulic Motor Adapter 1 381817
Capscrew –
28A 6 920369
Hydraulic Motor Adapter / Head
Coupling w/ Setscrew –
34 1 906970
1.25” straight key hyd. motor shaft
35 Key – Coupling 1 909184
76 Grease Fitting 1 317815
76A Grease Relief Fitting 1 701992
Hydraulic Motor Adapter –
135 1 041829
SAE A Flange
135A Capscrew – Adapter / Motor 2 920510

7-36
www.wertswelding.com
 960326 PARTS LIST
BLACKMER PARTS LIST Page 1 of 2 201-B00
With Installation and Maintenance Instructions Section 201
T-TYPE TRUCK PUMP STRAINERS Effective Oct 2006
FOR PUMP SIZES: 2″, 2.5″, 3″ Replaces July 2001

Part No. Part No Part No

Ref. No. Description Qty.
2" Size 2.5" Size 3" Size
1 Strainer Assembly 1 740053 740056 740061
2 Strainer Basket 1 621608 621612 621801
42 Body Flange - Plain2 0-1 651411 651611 651803
42A Inlet Flange - Plain 1 651603 651611 651803
42C Strainer Cover 1 611431 611633 611831
43 Gasket - Inlet Flange, Strainer Cover 2 381650 381650 381816
43A Gasket - Body Flange 1 381421 381650 381816
44 Capscrew - Strainer Body1 0-4 920331 920471 920491
Capscrew - 2" Inlet Flange 920471 920471 —
44A Capscrew – 2 1/2" Inlet Flange 4 — 920532 —
Capscrew - 3" Inlet Flange — — 920532
44C Capscrew - Strainer Cover 4 920471 920471 920491
2
44D Mounting Bolt - Body Flange 0-4 920381 920547 920547
44E Nut - Mounting Bolt2 0-4 922841 922850 922850
1 2
For direct pump mounting use Ref. Nos. 43A and 44. For intake line mounting use Ref. Nos. 42, 43A, 44D and 44E.

7-37
www.wertswelding.com
 PARTS LIST

PARTS TXD2.5A-AVA,
REF. TXD2A-AVA TXD3E-AVA TXH3A-AVA,
PART NAME PER TX200B-AVA
NO. PART NO. PART NO. PART NO.
VALVE PART NO.
1 Cap 1 411754 411754 411754 411753
2A Locknut 2 922923 922923 922923 922923
2C Adjustment Bushing 1 501701 501701 501701 501701
4 Cover 1 411406 411703 411705 411703
5 Capscrew 3-4 920444 920444 920444 920239
5A Machine Screw 2 922216 922216 922216 922216
5B Lockwasher 4 909649 909649 909649 909693
5C Capscrew w/ Hole 0-1 920433 920433 920433 —
6 Plate 1 701400 701735 701737 701735
6A Vent Plate 1 701418 701618 701818 701618
8 Spring 1 471429 471621 471806 471621
9 Valve ** 1 451417 451623 451807 451623
9C Diaphragm Assembly 1 871175 871180 871185 871180
10 Gasket 1 531403 531603 531803 531603
83 Snap Ring 1 903581 903581 903581 903581
88 O-Ring 1 711917 711917 711917 711917
A/V Conversion Kit ** — 891454 891696 891798 891799
* NOTE: The double diaphragm air valve assembly replaced the single diaphragm assembly in Aug. 1991.
** A/V Conversion Kit includes all above parts EXCEPT the Valve (ref. 9).

7-38
www.wertswelding.com
PARTS LIST

Fig. 1

Table 3 PARTS LIST for Piston Air Valve Style 1

PARTS
REF. NO. PART NAME PER PART NO.
VALVE
1 Cap 1 411754
2C Adjustment Bushing 1 501703
4 Cover 1 411758
5 Capscrew 3 920448
5A Flat washer 4 909662
5B Lockwasher 4 909649
5C Capscrew w/ Hole 1 920465
7 U-cup packing 2 FKM 1 495030
2
7A Quad Ring Seal FKM 1 495033
6 Breather vent 1 495029
Piston Assembly – includes 1 ea.:
8 1 891732
Piston, Adjusting Rod, Follower
Valve 3 Standard 451623
9 1
Corrosion Resistant 451624
10 Gasket 2 1 531603
88 O-Ring 2 FKM 1 701979
Conversion Kit 3 FKM — 891730
2
Seal Kit FKM — 891713
1
Valves prior to May 2009 used two U-Cup packings (7), no Quad Ring Seal (7A) and a different
Piston Assembly (8) construction. All parts as listed above may be used in the previous valves
2
Parts included in Seal Kit
3
Conversion Kit includes all above parts EXCEPT the Valve (ref. 9).

7-39
www.wertswelding.com
HYDRAULIC MOTOR ADAPTER INSTALLATION HYDRAULIC MOTOR ADAPTER KITS
Ref.
1. Remove the bearing cover (27A) and gasket (26) from the Part Name Qty.
inboard end of the pump. Discard the gasket. No.
26A Gasket- Hydraulic Motor Adapter 1
2. For Keyed Couplings: 28A Capscrew –Adapter / Pump Head 4/6
Apply a light coating of grease to the pump shaft, and 34 Coupling w/ Setscrew 1
install the coupling (34) on shaft with the shaft key aligned 35 Key – Coupling 1
in the notch. Lock the coupling into place with the 76 Grease Fitting 1
setscrew over the shaft key. Rotate the pump shaft until 76A Grease Relief Fitting 1
the key is on top. 135 Hydraulic Motor Adapter (SAE A flange) 1
For Splined Couplings: 135A Capscrew – Adapter / Motor 2
Apply a light coating of grease to the pump shaft, and
install the coupling (34) on shaft aligning the splined
coupler with the splined shaft. Push the coupler onto the
shaft until it comes to a stop.
3. Install a new gasket (26A) and hydraulic motor adapter
(135) on the pump head. Install capscrews (28A) through
the adapter, torquing to 30-lbs. ft (40 Nm.).
4. To assure proper shaft alignment between the hydraulic
motor and pump, install the hydraulic motor adapter (135)
to align with the machined pilot/shoulder on the pump
head. NOTE: The head must be replaced if it is not
machined with a pilot/shoulder — consult factory. 4-BOLT KITS
See Figure 1.
5. Grease the hydraulic motor shaft. Install the coupling key
(35) in the hydraulic motor shaft and align the key with the
6-BOLT KITS
notch in the coupling. Attach the hydraulic motor to the
adapter using the adapter/motor capscrews (135A),
torquing to 40-lbs. ft (54 Nm.).
6. Apply grease in the hydraulic motor adapter through the MOTOR
grease fitting (76). PUMP MODELS SHAFT KIT NO.
DIA.
Recommended Grease: 4-BOLT KITS
Mobil ® - Mobilgrease XHP222
TX1.5, TXD2A, TXD2.5A, TXD1220,
Exxon ® RONEX MP
TXD1225, TXV2.5, TXH3C, TLGLF3C 1” 891205
or equivalent.
STX2, STX1220
7. Attach hydraulic hoses to the hydraulic motor. TX1.5, TXD2, TXD1220, STX2, STX1220
1” 891464
(For H-series hydraulic motors)
TXD2A, TXD2.5A, TXD1220, TXD1225,
TXV2.5B, TXH3C, TLGLF3C 1.25” 891458
STX2, STX1220
LGLD2E, CRL2 1.25” 894425
XLWHP3A 1.25” 895150
6-BOLT KITS
TXD3, TXD1230, TXV3B, LGLD3E, CRL3 1.25” 895140
TXD3, TXD1230, TXV3B, LGLD3E, CRL3 1” 895143
TXH35A 1.25” 892229
TX206A (Keyed Pump Shaft) 1.25” 895141
TX206A (Splined Pump Shaft) 1.25” 895142
STX3 1.25” 892228
Figure 1 LGLD4A, CRL4, TLGLF4B 1.25” 892037

7-40
www.wertswelding.com
 7-41
www.wertswelding.com
 7-42
www.wertswelding.com
 Spec Sheet 208-001 E
Section: 200
Effective: April 2014
Replaces: September 2010

ENTERPRISE Series Vane Compressor

for Liquids to 170 m3/h

Historical partner
From the collaboration between HAMMOND and
MOUVEX, the Enterprise series is the result of
long experience that stands out today as the vane
compressor of reference.

Legendary robustness
The body and rotor are contructed of hard-coated
cast iron to withstand harsh environmental and
operating conditions, with strength unmatched in
the industry.
E140 Vane Compressor
Corrosion free
#519782.00
The integral anticorrosion coating of the compressor
and the check relief valve, combined with stainless
steel flanges, guarantee peace of mind.

Quality of the accessories

The new, extra-long inlet connection kit allows
for deporting the air filter and insures perfect
waterproofing.

E140: 1,000/1,750 rpm

E170: 1,000/1,600 rpm

E170 Vane Compressor
#519363.00
Dimensions: L 490/570 x H 220 x l 220 mm
L 19/23 x H 9 x l 9 in.

Weight: 36 kg (79 lbs.) to 47 kg (104 lbs.)

Enterprise Check
Relief Valve

7-43
www.wertswelding.com
 ENTERPRISE Series Vane Compressors
for Liquids to 170 m3/h
Technical Specifications Options and Accessories
E140 E170 The Enterprise Series compressors are available
in PTO or Hydraulic Motor drive versions.
Air Delivered m3/hr (CFM) 140 (82) 170 (102) Accessories available include:
Maximum Continuous Pressure bar-g (PSIG) 2.5 (36) 2.0 (29)

Pressure – 1500 rpm – Kw (HP) PowerAbsorbed @ Maximum 8.4 (11.3) 10.2 (13.7)

Maximum Speed (rpm) 1,750 1,600

Discharge Weight
E140 1.5" NPT flange Compressor lbs. kg Enterprise Check and Relief Valve Inlet Connection Kit
(Delivered with Enterprise Series) (Delivered with Enterprise Series)
E170 1.5" NPT flange E140 79 36
E170 104 47

Dimensions
A B C
Compressor
in. mm in. mm in. mm
E140 9 /2
1
240 9 /8
7
250 17 /87
454
Suction Filter (optional) Option: Enterprise with
E170 11 280 117/16 290 191/2 494
Hydraulic motor drive adaptor
(8¹¹/")

(8¹¹/") (8¹¹/") (8¹¹/")

(4³/")

(4³/")

Hydrive Hydraulic Cooler (optional)

(3¹/") (3¹/") (6¹¹/") (6¹¹/")

7-44
www.wertswelding.com
ENTERPRISE E140 - E170

7-45
www.wertswelding.com
SIDE PLATE ASSEMBLY

7-46
www.wertswelding.com
HYDRAULIC TRUNK & HYDRAULIC MOTOR

CHECK RELIEF VALVE

7-47
www.wertswelding.com
 CHECK RELIEF VALVE

PRESSURE LINE FILTER PLF

7-48
www.wertswelding.com
 OBSOLETE

OBSOLETE

OBSOLETE

7-49
www.wertswelding.com
*SHAFT SIZE 25MM.

7-50
www.wertswelding.com
 7-51
www.wertswelding.com
 7-52
www.wertswelding.com
 7-53
www.wertswelding.com
 7-54
www.wertswelding.com
 Spec Sheet 206-001 E
Section: 200
Effective: August 2013
Replaces: September 2010

HYDRIVE Series
Hydraulic Cooler, the Mouvex Solution

The Hydrive is used on Hydraulic drive for pumps

and compressors, it integrates 3 functions:
• Oil tank
• Oil cooler
• Security relief valve

UNIQUE DESIGN
• Compact size allows for easy installation on
tractors and trucks with minimal space on chassis
rails. The compact design with a low noise level
centrifugal fan provides maximum performance
and heat dissipation up to 13.5HP (10kW) on 2010
models and 26 HP (20kW) on 2020 models.

BUILT FOR PERFORMANCE

• Constructed from stainless steel materials to
withstand the harsh environmental and operation
conditions. The light weight cooler with a small
hydraulic oil reservoir, reduces the concern and
hazard of costly spills.

MAINTENANCE FRIENDLY
• The easy to read restriction gauge mounted on the
front of the Hydrive indicates when the spin-on
oil filter should be replaced. Normal hydraulic oil Fitting under the frame
maintenance is made easy with the reservoir drain
on the Hydrive tank.

OPTIONS AND ACCESSORIES

• Optional Control Valve on 2010 Models
• Complete Hydraulic System Packages
• Hydraulic motor Adapters for Mouvex-Blackmer
Pumps

Up to 200 L/min and 280 bar

Fitting on the frame

7-55
www.wertswelding.com
 HYDRIVE Series
Hydraulic Cooler, the Mouvex Solution
Hydrive 2010
Operations Parameters
Oil Flow Rate 15 - 32 US GPM 55 - 120 L/min
Circuit Pressure 725 - 4061 PSI 50 - 280 BAR
Fan Speed 2800 RPM
Return Pressure 15 - 75 PSI 1 - 5 BAR
Heat Dissipation 13,5 HP for 70° F Temp. Rise 10 kW for 40° C Temp. Rise
Fan Motor Flow 1.5 US GPM 5,5 L/min
Weight (dry) 53 Ibs 24 kg
Oil Tank Capacity 2.5 US Gallons 10 Liters

High pressure line Return line

1. Adjustable relief valve 1

2. Fan speed control valve 8 9
3. Return line filter Valve block
2
4. Fan motor 5
5. Filter by-pass valve
6. Oil cooler radiator
7. Fan
8. System pressure gauge point
9. Return pressure gauge point 7
Suction
------ Hydrive line Cold start 3
4 6 bypass
....... Valve block

Hydraulic Oil tank

pump

Hydrive 2020
Operations Parameters
Oil Flow Rate 15 - 53 US GPM 55 - 200 L/min
Circuit Pressure 725 - 4061 PSI 50 - 280 BAR
Fan Speed 2800 RPM
Return Pressure 15 - 75 PSI 1 - 5 BAR
Hydrive A B C
Heat Dissipation 26 HP for 70° F Temp. Rise 20 kW for 40° C Temp. Rise
2010 278 mm 526 mm 498 mm
Fan Motor Flow 2.2 US GPM 8,2 L/min
Weight (dry) 77 Ibs 35 kg 2020 428 mm 559 mm 566 mm
Oil Tank Capacity 4.5 US Gallons 17 Liters

Sales Information and Equipment Application Assistance

• Mouvex has a world wide distribution network to assist you in specifying any of our
family of pumps, compressors and other equipment for your application.
• For more information or to find the distributor nearest to you, please contact us as the
telephone, fax or internet address listed below.

7-56
www.wertswelding.com
 HYDRIVE 2010

RADIATOR

7-57
www.wertswelding.com
 FAN

7-58
www.wertswelding.com
 TANK

7-59
www.wertswelding.com
 HYDRIVE 2010 HYDRAULIC BLOCK

170 BAR MAX 280 BAR MAX

WITH SELECTOR VALVE

7-60
www.wertswelding.com
HYDRIVE 2010 HYDRAULIC BLOCK

7-61
www.wertswelding.com
 Interchangeability Information

Hydraulic block
The hydraulic block has been upgraded in January 2010 to receive a new relief valve used until 170 bar, where as the previous one is still
used but only above 170 bar.
As they are not interchangeable, there are two ports in the new block, the one not used is
plugged. In case of replacement of the relief valve, you need first to identify the model.
Please consider the following information.

Location of the relief valve Identification of the relief valve

Item Ref. Mark

57A 219220 1AR60
57B 57B 227050 1DR50

Bouchon
57A 57B
Plug

57A 170 bar version

Plug

Previous version
57A

280 bar version

1 AR 60 1 DR 50

7-62
www.wertswelding.com
 HYDRIVE 2020

7-63
www.wertswelding.com
 RADIATOR

FAN

Fan

7-64
www.wertswelding.com
 TANK

HYDRAULIC BLOCK

7-65
www.wertswelding.com
HI-DRIVE AND
LOW-DRIVE UNITS

7-66
www.wertswelding.com
 7-67
www.wertswelding.com
7

7-68
www.wertswelding.com
 7-69
www.wertswelding.com
 7-70
www.wertswelding.com
 RV FACEPLATE ASM PLAIN FACEPLATE ASM
(DOES NOT INCLUDE D8-443 LOCATOR RING (BH ONLY) G67-043125 SQ HD BOLT (2)
RV COMPONENTS) N3-177 BRZ
N3-226 CARBON G8-246 PACKING WASHER D23-252 SEAL RETAINER
N3-200 BRZ N3-179 IRON PACKING ONLY
D441-755 LOCKNUT (2)
N3-218 CARBON N3-633 CRBN/GLASS/TFE G17-232 LIP SEAL
N3-201 IRON MECH SEAL ONLY D42-1 PKG GLAND CLIP (2)
N3-634 CRBN/GLASS/TFE INCLUDES P3-137
AND LONG BRGS (2): LIP SEAL D441-755 LOCKNUT (2)
INCLUDES P3-200 G5-257 BRZ ONLY D441-755 LOCKNUT (2)
AND LONG BRGS (2): G5-416 CARBON
G5-257 BRZ G5-266 IRON D23-252 SEAL RETAINER G40-41 HB BALL BRG
G5-416 CARBON G5-860 CRBN/GLASS/TFE G41-10 RETAINING RING
G5-266 IRON D8-443 LOCATOR RING
G5-860 CRBN/GLASS/TFE CASE (ALL BH PUMPS & HB OR GHB WITH TFE SEAL) HB ONLY
PKG SET GHB ONLY
P1-178 3x11 TAPPED PORTS G67-043125 SQ HD BOLT (2)
RV ASM (STL SPR + BRGS) N43-1 STD P1-401 3x11 FLANGED PORTS MECH SEAL
(INCLUDES RV FACEPLATE ASM N43-186 TFE IMPREGNATED P1-170 4x11 FLANGED PORTS
PLUS STL & STD RV COMPONENTS) N43-151 TFE/GRAPHITE G41-76 RETAINING RING D45-100 GHB SPACER
N43-101 PURE TFE P1-177 3x17 TAPPED PORTS
N7-250 BRZ, STD N43-103 GRAPHITE FILAMENT P1-402 3x17 FLANGED PORTS G41-20 RETAINING RING
N7-406 BRZ, HI N43-170 GARLOCK DSA P1-181 4x17 FLANGED PORTS
N7-279 CARBON, STD G63-1 LUBE FITTING G40-147 GHB BALL BRG
N7-410 CARBON, HI N/A 3x22 TAPPED PORTS (HB ONLY)
G41-76 RETAINING RING
N7-252 IRON, STD P1-175 3x22 FLANGED PORTS
N7-638 IRON, HI MECH SEAL P1-171 4x22 FLANGED PORTS D83-5 GHB LIP SEAL
N7-745 CRBN/GLASS/TFE, STD P10-178 PKG GLAND
N7-746 CRBN/GLASS/TFE, HI G4-101 STD D42-2 SPRING CLIP
G4-140 FLUOROELASTOMER BACKPLATE ASM (BRGS)
G4-65 TFE / VITON O-RING G67-043250 SQ HD BOLT (2)
(REQ MOD BACKPLATE HB (P2-144)
RV ASM (SST SPR + BRGS) & D8-443 LOCATOR RING) PKG SET N2-403 BRZ
(INCLUDES RV FACEPLATE ASM CASE G8-246 PACKING WASHER N2-480 CARBON
PLUS SST & STD RV COMPONENTS) N2-422 IRON
D30-9 KEY (HB) G49-037100 HEX HD CAP SCREW (16) N2-1355 CRBN/GLASS/TFE
N7-442 BRZ, STD D30-32 (GHB & BH) D48-34 DOWEL PIN (4) N2-1183 .003" OS BRZ
N7-443 BRZ, HI
N7-309 CARBON, STD G49-24 WASHER HD CAP SCREW (4) MOD HB (P2-1398)
N7-735 CARBON, HI (TFE MECH)
N7-737 IRON, STD DRIVE SHAFT BACKPLATE ASM N2-1065 BRZ
N7-830 IRON, HI D30-9 KEY (2) N2-1067 CARBON

www.wertswelding.com
N7-937 CRBN/GLASS/TFE, STD N2-1166 IRON
N7-938 CRBN/GLASS/TFE, HI G56-12 PIPE PLUG (2) N2-1290 CRBN/GLASS/TFE
(22 SIZE ONLY)

7-71
BH (P2-1557)
DRIVE GEAR, LH N2-1312 BRZ
DRIVE SHAFT N2-1313 CARBON
PLAIN FACEPLATE ASM FLANGE KIT (2) N2-1314 IRON
(INCLUDES ONE EACH: (PKG OR MECH) N2-1566 CRBN/GLASS/TFE
G44-062 HEX NUT (8) FLANGE, GASKET, HB STEEL
(22 SIZE ONLY) HARDWARE) MOD BH (TFE MECH)
D11-338 CASE GASKET (2) D1-2072 11 SIZE N/A
D11-339 CASE GASKET, ALUM (3) D1-2073 17 SIZE
D1-1998 22 SIZE GHB (P2-141)
IDLER SHAFT DRIVE GEAR, LH N2-406 BRZ
HB SST N2-544 CARBON
RV FACEPLATE ASM HB / GHB STEEL D1-2076 11 SIZE N2-424 IRON
P6-276 11 SIZE D1-2077 17 SIZE N2-XXXX CRBN/GLASS/TFE
P6-274 17 SIZE D1-2027 22 SIZE
IDLER GEAR, RH P6-278 22 SIZE MOD GHB (P2-1397)
TRIPLE LIP SEAL BH STEEL
FLANGE KIT (2 REQ'D) DRIVE SHAFT (TFE MECH)
HB / GHB SST D1-2424 11 SIZE N2-1064 BRZ
NOT REQ'D TO D6-528 11 SIZE D1-2425 17 SIZE N2-1073 CARBON
BE SAME FOR BOTH D6-672 17 SIZE HB STEEL D1-2426 22 SIZE N2-1129 IRON
G56-12 PIPE PLUG (2) D6-630 22 SIZE D1-2932 11 SIZE N2-XXXX CRBN/GLASS/TFE
11 SIZE D1-2935 17 SIZE BH SST
BV FACEPLATE ASM N14-14 2" NPT (STD) BH STEEL D1-2938 22 SIZE D1-2594 11 SIZE INCLUDES LONG BRGS (1):
RV ONLY N14-15 2" NPT EL (VERT) REQUIRES RET RING D1-2592 17 SIZE G5-257 BRZ
BV USE (2) EACH G8-281 RV ADAPTER N14-16 2" NPT EL (HOR) (2) G41-108 HB SST D1-2434 22 SIZE G5-416 CARBON
P6-418 11 SIZE D1-2990 11 SIZE G5-266 IRON
D8-348 SPRING GUIDE D16-16 RV POPPET 17 SIZE P6-414 17 SIZE D1-2991 17 SIZE GHB STEEL G5-860 CRBN/GLASS/TFE
N14-17 2" NPT (STD) P6-430 22 SIZE D1-2992 22 SIZE D1-2074 11 SIZE
P17-110 RV CAP N14-62 2-1/2" NPT D1-2075 17 SIZE
RV SPRING INCLUDES SHORT BRGS (1):
N14-18 3" NPT BH SST BH STEEL D1-2001 22 SIZE G5-258 BRZ
ADJUSTING SCREW G10-355 STL, STD PRESS N14-19 2" NPT EL REQUIRES RET RING D1-2934 11 SIZE
G10-375 STL, HI PRESS G5-415 CARBON
G62-44 STD BV FACEPLATE ASM N14-20 3" NPT EL (2) G41-108 D1-2937 17 SIZE GHB SST G5-267 IRON
G62-51 SST G10-363 SST, STD PRESS (INCLUDES RV FACEPLATE ASM D6-907 11 SIZE D1-2940 22 SIZE D1-1999 11 SIZE
G10-429 SST, HI PRESS G5-859 CRBN/GLASS/TFE
PLUS STL & STD RV COMPONENTS) 3x22 SIZE D6-1289 17 SIZE D1-2000 17 SIZE
N14-30 3" NPT (STD) D6-1188 22 SIZE BH SST D1-2078 22 SIZE
D828-41 RV CAP GASKET N7-901 BRZ, STD N14-28 2" NPT D1-3034 11 SIZE
LOCK & SEAL NUT N7-902 BRZ, HI N14-29 2-1/2" NPT D1-3035 17 SIZE
N7-915 CARBON, STD N14-59 4" NPT IDLER GEAR, RH D1-3036 22 SIZE IDLER SHAFT
G43-18 STD
G43-65 TFE N7-916 CARBON, HI N14-31 3" NPT EL
N7-917 IRON, STD STEEL GHB STEEL STEEL
N7-918 IRON, HI 4x22 SIZE P6-275 11 SIZE D1-2931 11 SIZE D1-1098 11 SIZE
3511-4722 HB, BH, GHB TYPE 3 (2) G49-24 NOT REQ'D
N14-22 4" NPT (STD 4x22)
N14-57 2" NPT
P6-273 17 SIZE
P6-277 22 SIZE
D1-2936 17 SIZE
D1-2939 22 SIZE
D1-1100 17 SIZE
D1-1077 22 SIZE
USE THESE PARTS INSTEAD: N14-21 3" NPT
(2) D22-434 STUD N14-23 3" NPT EL SST GHB SST SST
(2) G44-037 NUT N14-24 4" NPT EL D6-529 11 SIZE D1-3007 11 SIZE D1-1099 11 SIZE
(2) G8-52 WASHER D6-673 17 SIZE D1-3008 17 SIZE D1-860 17 SIZE
EL = 90 ELBOW D6-631 22 SIZE D1-3009 22 SIZE D1-1078 22 SIZE
www.roperpumps.com
NOV 2013
 MECH SEAL
RV FACEPLATE ASSEMBLY RV FACEPLATE ASSEMBLY
(INCLUDES FACEPLATE ASSEMBLY (INCLUDES FACEPLATE ASSEMBLY PKG SET G67-050125 SQ HD BOLT (2)
AND ALL RV COMPONENTS) AND ALL RV COMPONENTS) N43-3 STD
BUNA O-RING VITON O-RING D45-166 SEAL SPACER D8-444 LOCATOR RING
N43-187 TFE IMPREGNATED (HB WITH NON-TFE SEAL ONLY) (ALL BH PUMPS & HB OR GHB WITH TFE SEAL)
N43-156 TFE/GRAPHITE
STD PRESSURE STD PRESSURE N43-105 PURE TFE GHB ONLY D23-267 SEAL RETAINER
N7-487 BRZ STL N7-500 BRZ STL N43-181 GRAPHITE FILAMENT
N7-534 LUBED BRZ STL N7-xxx LUBED BRZ STL G41-155
N43-174 GARLOCK DSA G41-5 RETAINING RING RETAINING RING G43-12 LOCKNUT (2)
N7-xxx BRZ SST N7-xxx BRZ SST G63-1 LUBE FITTING
N7-xxx LUBED BRZ SST N7-xxx LUBED BRZ SST MECH SEAL MECH SEAL ONLY
G4-112 STD G40-31 BALL BEARING
N7-494 CRBN STL N7-570 CRBN STL G4-142 FLUOROELASTOMER
N7-641 LUBED CRBN STL N7-xxx LUBED CRBN STL G4-165 TFE / VITON O-RING
(REQ MOD BACKPLATE PACKING ONLY
N7-xxx CRBN SST N7-907 CRBN SST & D8-444 LOCATOR RING OUTBOARD TO SEAL
N7-xxx LUBED CRBN SST N7-xxx LUBED CRBN SST & DO NOT USE D45-166 SEAL SPACER)
G43-12 LOCKNUT (2)
N7-496 IRON STL N7-609 IRON STL
N7-xxx LUBED IRON STL N7-795 LUBED IRON STL D42-4
PKG GLAND CLIP (2)
N7-749 IRON SST N7-xxx IRON SST DRIVE SHAFT
N7-xxx LUBED IRON SST N7-xxx LUBED IRON SST PKG/MECH SEAL HB ONLY P10-179 PKG GLAND
BH
D1-2435 STL
HI PRESSURE HI PRESSURE D1-2640 SST
N7-488 BRZ STL N7-501 BRZ STL HB D83-9 LIP SEAL
N7-535 LUBED BRZ STL N7-xxx LUBED BRZ STL D1-2009 STL TRIPLE LIP
FLANGE KIT D1-2085 SST G40-35 BALL BEARING SEAL ONLY
N7-xxx BRZ SST N7-xxx BRZ SST (TWO KITS REQ'D PER PUMP) GHB G41-25 RETAINING RING
D1-2011 STL G43-12
N7-xxx LUBED BRZ SST N7-xxx LUBED BRZ SST INCLUDES FLANGE, GASKET, LOCKNUT (2)
& HARDWARE D1-2083 SST D45-27 GHB SPACER
N7-495 CRBN STL N7-571 CRBN STL N14-57 2" NPT THRU
N7-642 LUBED CRBN STL N7-xxx LUBED CRBN STL N14-21 3" NPT THRU TRIPLE LIP SEAL
N14-22 4" NPT THRU (STD) BH
N7-xxx CRBN SST N7-908 CRBN SST N14-23 3" NPT ELBOW D1-2952 STL D23-267
N7-xxx LUBED CRBN SST N7-xxx LUBED CRBN SST N14-24 4" NPT ELBOW D1-3028 SST SEAL RETAINER
HB G67-050300
N7-784 IRON STL N7-xxx IRON STL D1-2950 STL SQ HD BOLT (2)
D1-3043 SST D8-444 LOCATOR RING
N7-xxx LUBED IRON STL N7-796 LUBED IRON STL (BH ONLY)
DRIVE GEAR, RH GHB D42-3 SPRING CLIP
N7-xxx IRON SST N7-xxx IRON SST HB & GHB D1-2951 STL G67-050125
N7-xxx LUBED IRON SST N7-xxx LUBED IRON SST P6-384 STL D1-xxxx SST G8-249 SQ HD BOLT (2)
D6-1148 SST PACKING WASHER
BH G8-249
P6-385 STL PACKING SET PACKING WASHER
FACEPLATE ASSEMBLY D6-xxxx SST G17-234
PLAIN (P3-675): KEY BACKPLATE ASSEMBLY TRIPLE LIP SEAL
N3-477 BRZ BH
N3-479 LUBED BRZ IDLER GEAR, LH KEY
D30-216 STL

7-72
N3-478 CRBN P6-383 STL D30-10 STL BEARINGS:
D6-1147 SST D30-203 SST D30-226 SST (INCLUDED IN BACKPLATE AND BACKPLATE ASSEMBLY
N3-553 LUBED CRBN HB
N3-480 IRON FACEPLATE ASSEMBLIES)
D30-11 STL

www.wertswelding.com
N3-xxx LUBED IRON G48-49 BH (P2-1558)
BH ONLY: D30- SST LONG BRG N2-1340 BRZ
DOWEL PIN (4) GHB
G41-119 (QTY ONE IN BACKPLATE) N2-1445 LUBED BRZ
RV (P3-618): RETAINING RING (2) D30-22 STL
(DOES NOT INCLUDE RV COMPONENTS) (QTY TWO IN FACEPLATE) N2-1341 CRBN
D30- SST G5-265 BRZ N2-1669 LUBED CRBN
N3-405 BRZ
N3-443 LUBED BRZ G5-466 CARBON N2-1342 IRON
N3-412 CRBN BV FACEPLATE ASSEMBLY G5-269 IRON N2-xxxx LUBED IRON
O-RING N3-554 LUBED CRBN
G14-485 BUNA N3-413 IRON BV (P3-932) SHORT BRG MOD BH (TFE MECH) N/A
G69-21 VITON N3-680 LUBED IRON (DOES NOT INCLUDE RV COMPONENTS) (QTY ONE IN BACKPLATE ONLY)
IDLER SHAFT N3-789 BRZ G5-264 BRZ HB (P2-1359)
D1-2087 STL N3-843 CRBN G5-465 CARBON N2-1036 BRZ
RV FACEPLATE ONLY N3-844 IRON G5-270 IRON N2-1039 LUBED BRZ
D1-2088 SST
CASE N2-1037 CRBN
KEY P1-481 N2-1224 LUBED CRBN
G49-050600 (2) D30-10 STL
HEX HD CAP SCREW N2-1038 IRON
D30-203 SST BV ASSEMBLY BV ASSEMBLY N2-1432 LUBED IRON
G33-6 RV SEAL NUT CASE GASKET (3) O-RING (2) (INCLUDES FACEPLATE ASSEMBLY (INCLUDES FACEPLATE ASSEMBLY
D11-397 STD G14-485 BUNA AND ALL RV COMPONENTS) AND ALL RV COMPONENTS) MOD HB (P2-1402)
D15-42 D11-493 ALUM G69-21 VITON BUNA O-RING VITON O-RING (TFE MECH)
ADJUSTING SCREW G49-050150 N2-1075 BRZ
HEX HD CAP SCREW STD PRESSURE STD PRESSURE N2-xxxx LUBED BRZ
QTY (16) PUMP WITHOUT RV N7-909 BRZ STL N7-957 BRZ STL N2-1082 CRBN
QTY (14) PUMP WITH RV N7-947 BRZ SST N7-958 BRZ SST N2-xxxx LUBED CRBN
D16-112 RV POPPET N7-948 CRBN STL N7-959 CRBN STL N2-1230 IRON
N7-949 CRBN SST N7-960 CRBN SST N2-xxxx LUBED IRON
D16-112 RV POPPET (4) N7-950 IRON STL N7-961 IRON STL
D22-122 STUD N7-951 IRON SST N7-962 IRON SST GHB (P2-1360)
RV SPRING (HI REQ BOTH SPRINGS) N2-1040 BRZ
G44-050 HEX NUT STEEL HI PRESSURE HI PRESSURE N2-1602 LUBED BRZ
G10-383 STD N7-910 BRZ STL N7-963 BRZ STL N2-1041 CRBN
G10-383 + G10-386 HI G49-050125 (6) N7-952 BRZ SST N7-964 BRZ SST N2-1641 LUBED CRBN
HEX HD CAP SCREW N7-953 CRBN STL N7-965 CRBN STL N2-1042 IRON
SST N7-954 CRBN SST N7-966 CRBN SST N2-1675 LUBED IRON
G10-445 STD N7-955 IRON STL N7-967 IRON STL
G10-445 + G10-446 HI D15-42 (2)
ADJUSTING SCREW N7-956 IRON SST N7-968 IRON SST MOD GHB (P2-1403)
(TFE MECH)
3548, 3648, 3748 BH, HB, GHB TYPE 3 RV SPRING (HI REQ BOTH SPRINGS - FOUR TOTAL) N2-1076 BRZ
STEEL N2-xxxx LUBED BRZ
G33-6 RV SEAL NUT (2) (2) G10-383 STD N2-1182 CRBN
(2) G10-383 + (2) G10-386 HI N2-xxxx LUBED CRBN
N2-1427 IRON
SST N2-xxxx LUBED IRON
www.roperpumps.com (2) G10-445 STD
(2) G10-445 + (2) G10-446 HI
 7-73
www.wertswelding.com
 Petroleum Handling - Safety Pumping System Kits

SPS pump systems offer a safe, simple driver friendly interface that improves driver safety and protects
the environment. Our systems mount to pumps from leading manufacturers creating an engineered
pump system. SPS systems are easy to install and operate. We do not manufacture the pump.
SPSVRS - V3N Item # Part Name
VANE SYSTEM KIT
SPS100414 SPSVRS-V3N VANE SYS KIT
Made in the U.S.A.
Select this model for refined liquid products in the
combustible and flammable categories - Diesel,
gasoline, avgas, alcohol, biodiesel, fuel additives,
all lubricant oils, etc. and where high performance is
required, up to 240 Gpm, truck mounted, curb side.

Compatible with 3 inch Blackmer TDX3E vane

pump or equivalent.

SPSZR - G4N Item # Part Name

GEAR SYSTEM KIT
SPS100415 SPSZR-G4N GEAR SYS KIT
Made in the U.S.A.

Select this model for unrefined or highly viscous liquid

products in the combustible and flammable categories
- Crude oil, fracking fluids, asphalts and tars where
ultra-high performance is required, up to 400 Gpm,
shaft or hydraulic drive, truck mounted, driver's or
curbside.

Compatible with 4 inch Roper 3648 gear pump

or equivalent.

SPSZR - G4NTM Item # Part Name

GEAR SYSTEM KIT
SPS100456 SPSZR-G4NTM GEAR SYS KIT
Made in the U.S.A.
Select this model for unrefined or highly viscous
liquid products in the combustible and flammable
categories - Crude oil, fracking fluids, asphalts and
tars where ultra-high performance is required, up to
400 Gpm, hydraulic drive, trailer mounted. Can be
configured for driver's side or curbside operation.

Compatible with 4 inch Roper 3648 gear pump

or equivalent.

7-74
www.wertswelding.com
Petroleum Handling - Safety Pumping Systems Optional Fittings

A wide range of pump system configurations are possible by selecting optional fittings fo
the inlet and outlet ports of the pump system.
Item # Part Name Description Item # Part Name Description
SPS100052 SPS30VG ALUM 3 inch Victaulic SPS100025 SPS30A ALUM 3 inch Male Cam
FLG X GRV Groove X Flange, FLG X ADAPT & Grv X Flange,
Aluminum Aluminum

Item # Part Name Description Item # Part Name Description

SPS100026 SPS30NPTM ALUM 3 inch Male SPS100419 SPS30TTF ELBOW 3 inch TTF
FLGXNPTM NPT X Flange, ALUM FLG Round Flange X
Aluminum Flange Elbow,
Aluminum

Item # Part Name Description Item # Part Name Description

( Crossover, 3 inch Crossover, 3 inch SPS100048 SPS30VG ELBOW AL SPS30VGX
FLG X GRV (Vane ELBOW AL
Crossover) FLG X GRV
SPS100086 SPS30VGX ELBOW AL SPS30VGX
FLG X VG (Extended ELBOW AL
Length) FLG X GRV

Item # Part Name Description Item # Part Name Description

SPS100416 SPS40VG ALUM 4 inch Victaulic SPS100417 SPS40A ALUM 4 inch Male Cam
FLG X GRV Groove X Flange, FLG X ADAPT & Grv X Flange,
Aluminum Aluminum

Item # Part Name Description Item # Part Name Description

SPS100418 SPS40NPTM AL 4 inch Male SPS100361 SPS40VG ELBOW 4 inch Victaulic
FLG X NPTM NPT X Flange, AL FLG X GRV Groove X
Aluminum Flange Elbow,
Aluminum

Item # Part Name Description Item # Part Name Description

SPS100420 SPS40A ELBOW 4 inch Male SPS100386 SPS40NPTM 4 inch Male NPT
AL FLG X ADAPT Cam & Grv X ELBOW AL NPTM X Flange Elbow,
Flange Elbow, Aluminum
Aluminum

Item # Part Name Description Item # Part Name Description

( Crossover 4 inch Crossover 4 inch SPS100385 SPS40TTF ELBOW 4 inch TTF
ALUM FLG Round Flange X
Flange Elbow,
Aluminum
Item # Part Name Description
SPS100002 SPS 4-Way SPS 4-Way Valve,
Valve, Aluminum (Truck Mount
Aluminum System)
SPS100408 SPS 4-Way SPS 4-Way Valve,
Valve, Aluminum (Trailer
Aluminum Mount System)

7-75
www.wertswelding.com
 1500AC
1.5" STATIONARY TRANSFER
PUMP

2000
2" STATIONARY TRASFER
PUMP

M1500
1.5" MOBILE TRANSFER
PUMP

CUSTOM MODELS
AVAILABLE!

7-76
www.wertswelding.com
 ISO 18
PARTS LIST
1-1/2" HOSE REELS

7-77
www.wertswelding.com
 PARTS LIST
ISO-18
1 1/2" Hose Reel
When ordering parts
BE SURE TO SPECIFY COMPLETE MODEL NUMBER and SERIAL NUMBER OF REEL.
USE PART NUMBER!
Item No. Description PART NUMBER Quantity
1 Drum, 10-1/2" Diameter (Specify Model) ............................................... 9905.3131 1
2 Front Disc, 19-20 Series ........................................................................ 9903.0821 1
2 Front Disc, 23-24 Series ........................................................................ 9903.1121 1
2 Front Disc, 25-26 Series ........................................................................ 9903.1321 1
2 Front Disc, 26-27 Series ........................................................................ 9903.1421 1
2 Front Disc, 28-29 Series ........................................................................ 9903.1521 1
2 Front Disc, 30-31 Series ........................................................................ 9903.1621 1
3 Back Disc, 19-20 Series ........................................................................ 9903.0821 1
3 Back Disc, 23-24 Series ........................................................................ 9903.1121 1
3 Back Disc, 25-26 Series ........................................................................ 9903.1321 1
3 Back Disc, 26-27 Series ........................................................................ 9903.1421 1
3 Back Disc, 28-29 Series ........................................................................ 9903.1521 1
3 Back Disc, 30-31 Series ........................................................................ 9903.1621 1
4 Front Frame (Up to 23-24)..................................................................... 9906.0031 1
4 Front Frame (Up to 30-31)..................................................................... 9906.5031 1
6 Back Frame (Up to 23-24) ..................................................................... 9906.0031 1
6 Back Frame (Up to 30-31) ..................................................................... 9906.5031 1
7 Front Foot (Specify Model) .................................................................... 9907.3000 1
9 Back Foot (Specify Model)..................................................................... 9907.3000 1
11 1-1/2" Flange Hub Only (Specify Model) ............................................... 9901.3640 1
12 1-1/2" FNPT Iron Pipe Riser Only.......................................................... 9901.3760 1
13 EH-936 Washer...................................................................................... 9965.0015 2
16 3/8"-16 Carriage Bolt w/Nut ................................................................... Specify Model 6
17 3/8" Spacer Pipes (Specify Model) ........................................................ 9904.3200 6
18 Back Bearing Complete ......................................................................... 9902.1400 1
18A Self-Aligning Pillow Block, Back ............................................................ 9902.2900 1
18B Self-Aligning Bearing Holder, Back........................................................ 9902.2800 1
19 Back Bearing Insert Only ....................................................................... 9902.1500 1
20 Front Bearing Complete......................................................................... 9902.1610 1
20A Bearing Holder (Bottom Strap), Front .................................................... 9902.2950 1
20B Bearing Holder (Top Strap), Front ......................................................... 9902.2955 1
21 Front Bearing Insert Only (With Grease Fitting) .................................... 9902.1700 1
22 Ring Gear, H-26 (Up to 25-26) .............................................................. 9914.0372 1
22 Ring Gear, H-28 ..................................................................................... 9914.0382 1
23 Pinion Gear, H-27 (Up to 25-26)............................................................ 9914.0393 1
23 Pinion Gear, H-29 .................................................................................. 9914.0404 1
23A Gear Guard ............................................................................................ 9914.0618 1
24 5/8"-18 SAE Hex Nut (ESNA) ................................................................ 9904.5600 1
25 Pinion Shaft (Specify Model) ................................................................. 9914.0250 1
27 Side Pinion Bearing ............................................................................... 9914.0243 1
28 Collar & Set Screw................................................................................. 9914.0351 1
29 Crank Handle, H-18 Complete............................................................... 9914.0011 1
29A Hand Crank Handle ............................................................................... 9914.0506 1
29B Hand Crank Handle Bolt w/Nut.............................................................. 9914.0511 1
30 Brake Pad, H-3 ...................................................................................... 9914.0433 1
31 Vertical Rewind Bracket ......................................................................... 9914.0233 1
32 Brake Spring, H-31 ................................................................................ 9914.0451 1
33 Brake Wheel .......................................................................................... 9914.0413 1
34A Comet Brake Hub .................................................................................. 9947.0038 1
34B Comet Brake Strap only......................................................................... 9947.0091 1
34C Comet Brake Tention Adjuster (Bolt,Spring,Washer,Wing Nut) ............ 9947.0092 1
35 112T35 Disc Sprocket............................................................................ 9910.1321 1
35 138T35 Disc Sprocket ........................................................................... 9910.1423 1
35 180T35 Disc Sprocket ........................................................................... 9910.1526 1
36 Chain, #35.............................................................................................. Specify Model 1
38 Motor Sprocket, 11T35 x 1-5/16 ............................................................ 9910.1118 1
41 Motor, 12 Volt Explosion-Proof .............................................................. 9915.0003 1
42 1-1/2" 90 Deg. FxF Swivel Joint (STANDARD; Not for LPG) (Buna-N) 9930.4210 1
42 1-1/2" 90 Deg. FxFxvic Swivel Joint (viton seals).................................. 9930.4220 1
42 1-1/2" 90 Deg. FxF Swivel Joint (for LP GAS Applications) .................. 9930.0531 1
50 Gasket.................................................................................................... 9965.0021 1
59 Sprocket Spacer .................................................................................... 9954.0017 6
103A 5/16"-18 x 1/2" Hex Head Bolt ............................................................... 9904.1101 9
103B 3/8"-16 x 3/4" Carriage Bolt w/Nut (w/o Comet Brake).......................... 9904.0201 2
103B 3/8"-16 x 2" Carriage Bolt w/Nut (w/Comet Brake)................................ 9947.0093 1
103C 3/8"-16 x 3/4" Spinlock Bolt ................................................................... 9904.2201 12
103D 3/8"-16 x 1" Spinlock Bolt ...................................................................... 9904.2202 4
103E 3/8"-16 Spinlock Nut .............................................................................. 9904.6200 16
103F 1/2"-13 x 1" Hex Head Bolt .................................................................... 9904.1402 6
103G 1/2" Lock Washer................................................................................... 9954.0030 6
103H 1/2"-13 Hex Nut ..................................................................................... 9904.5400 4
103J 3/8"-16 ESNA Nut .................................................................................. 9904.5201 1
6M HP 5-08 H-623-P
Rev. 5

7-78
www.wertswelding.com
 7-79
www.wertswelding.com
 HANNAY REELS
PARTS ID GUIDE

SWIVEL JOINTS, RISERS, HUB ASSEMBLIES

C1 C2 C4
ITEM PART DESCRIPTION

C7 C1 9927.8138 1/2” 90° MxF BP Super Swivel

C6
C2 9929.8538 1” 90° FxF BP Super Swivel
C5 C4 9927.8151 1/2” 90° MxF Super Swivel (FxF also Avail.)
C8 9927.8551
C5 9929.8551 1” 90° FxF Super Swivel (Buna)
C6 Specify Super Swivel Repair Kit (Specify Size)
C7 9930.4210 1-1/2” 90° FxFxV Swivel (WHJ1590)
C10
C8 9930.4610 1-1/2” Straight FxFxV Swivel
C11
C9 C12 (WHJ15180)
C9 9936.0642 1-1/2” PK-1 BUNA-N Packing (Merkel)
C10 9930.5703 1-1/2” Straight Victaulic H-5 Joint
C17 C11 9936.0659 H-5C Rope Packing Seal for H-5 Joint
C14
C12 9929.0501 1” 90° Full Circle Swivel
C13 9930.0531 1-1/2” 90° FxF Full-Circle Swivel
C13 C14 9901.1600 1” FIPT Iron Welded Hub Assembly (Specify Model)
C15 9901.3760 1-1/2” FIPT Iron Flanged Riser
C16 9965.0024 O-Ring for 1-1/2” Risers (2-5/8” Diam.)
C15
C16 9965.0025 O-Ring for 3” Risers (3-3/4” Diam.)
C16
C17 9901.2840 1-1/2” Hub Assy Complete (Specify Model)

BEARINGS
ITEM PART DESCRIPTION
E3 E4 E5 E6
E3 9902.1200 1/2” S.A. Ball Bearing Complete
E4 9902.1300 1/2” S.A. Ball Bearing Insert
E5 9902.1400 1” S.A. Ball Bearing Complete
E6 9902.1500 1” S.A. Ball Bearing Insert
E7 E8 E7 9902.1610 1-1/2” S.A. Bronze Bearing Complete (E-coated)
E9
Not Shown 9902.1620 1-1/2” S.A. Bronze Bearing Complete (304 S.S.)
E8 9902.1700 1-1/2” S.A. Bronze Bearing Insert
E9 9902.1730 1” S.A. Bronze Bearing insert

Note - photos shown not actual size.

7-80
www.wertswelding.com
 MOTORS, SPROCKETS, CHAIN
ITEM PART DESCRIPTION
A1
A1 9915.0042 12 Volt Flange Mount Non-Exp-Proof Motor
A2 9915.0003 12 Volt Flange Mount Explosion-Proof
A2
Motor
A3 9915.0014 12 Volt Base Mount Explosion-Proof Motor
A8 A5 9916.0071 Pair of Brushes for 12 Volt Non-Exp-Proof
A3
Motor (#572008)
A6 9916.0070 Two Pairs of Brushes for 12 Volt Explosion
A5 Proof Motor (#572000)
A7 9923.0008 Flange Mount Motor Plate for Non-Exp-
Proof Motor
A6
A8 9923.0006 P66A-00090 Motor Mounting Plate Right
Angle for Non-Exp-Proof Motor
A7
A9 9912.0001 10’ Length #35 Chain w/Connecting Link
A9 9912.0002 10’ Length #40 Chain w/Connecting Link
A10 9912.0010 Connecting Link for #35 Chain
A10 A10 9912.0009 Connecting Link for #40 Chain
Non plated A11 9910.1423 138T35 Disc Sprocket, 16-5/8” Diameter
A9
(E-Coated)
A13 A12 9910.3128 146T40 Disc Sprocket, 23-1/2” Diameter
(E - coated)
Not Shown 9910.1321 112T35 Disc Sprocket, 13-3/8” Diameter
A14 (E-coated)
A13 9910.1116 11T35 Motor Sprocket, 3/4” Long
A12 A14 9910.1117 11T35 Motor Sprocket, 1-1/16” Long
A11 A15 9910.1118 11T35 Motor Sprocket, 1-5/16” Long
A15 A16 9910.1119 11T35 Motor Sprocket, 1-3/4” Long
A17 A17 9910.2219 Disc & Sprocket for Caliper Brake (#35
Chain)
Not Shown 9910.2100 Disc & Sprocket for Caliper Brake (#40
A16 Chain)
A18
A18 Specify Molded Chain Guard (left or right)

SWITCHES AND ELECTRICAL

ITEM PART DESCRIPTION
B1 B2 B4
B1 9917.0001 Red Dot EXPB-2A Switch (12 Volt)
B2 9917.0014 Red Dot Internal Switch
B4 9917.0061 Red Dot 5-Port Round Junction Box/Cover
B5 9917.0062 #6 Wire Nut (For Red Dot Junction Box)
B5 B6 B7
B8 B6 9917.0063 Insulated “Bug” Connector
B7 9917.0025 12 Volt Solenoid (Diode-Suppressed)
B8 Specify SDLM Circuit Breaker (Specify Amperage)
B9 9917.0024 CB-2 Mounting Bracket (for Circuit Breaker)
B9 B10 B11
B10 9917.0006 Push-Button 12 Volt Switch (Less Cap)
B11 9917.0008 Rubber Cap (For Push Button Switch)
B12 9917.0200 EPS-1 Switch (Used with Guidemaster)
B13 9917.0207 EPS-2 Mounting Bracket (Used with EPS-1)
B13 B14
B14 9917.0208 Extension Bracket for EPS-2
B12

7-81
www.wertswelding.com
 ROLLER ASSEMBLIES, CABLE GUIDES, HOSE STOPS
ITEM PART DESCRIPTION
D4
D3 D1 Specify Top Wind FH-3 Mtg. Brkt. (Specify Model)
D1 D2 9939.0042 FH-3 Roller & Spool Assy. (Specify Model)
D3 9940.0012 FH-307 Delrin-Over-Steel Step Bolt
D4 9940.0002 FH-309-P Black Plastic Cap
D5 D6
D2 D5 9940.0005 FH-301 Spool
D6 9940.0006 FH-302 Block
D7 9940.0007 FH-303-15 (1.5”) Trunnion Bearing
D8
D7 D8 9940.0008 FH-303-2 (2”) Trunnion Bearing
D9 9939.0062 Utility Hose Roller Assy. “C” (Spec. Model)
D11 D10 9940.0076 EH-650 Mounting Block (Plated)
D9 D10 D11 9939.0003 EH-714 Roller Assembly
D12a 9922.0111 HS-3 Hose Stop (Specify OD of Hose)
D12b 9922.0200 HS-35 Hose Stop For Single Hose
(Specify OD of Hose)
Not HS-35 Hose Stop For Twin Hoses
D15
D12a D12b D13
D14 Shown 9922.0210
(Specify OD of Hose)
D13 9922.0012 HS-45 Hose Stop (Specify OD of Hose)
D14 9951.0009 GR-4A Guide Arm Positioner
D16 D15 9951.0010 GR-4 Guide Arm
D17 D18 D16 9951.0012 GR-5 Scoop Cable Guide
D17 Specify “R200” Series Roller Assembly
D20
D18 Specify “N200” Series Roller Assembly
D19 Specify “R300” Series Roller Assembly
D19 D20 Specify Roller Mounting Arm (2) per reel
D22 (For “N” Series Spring Reels)
D21 9940.0016 FH-303 1 1/2“Trunnion Bearing (New Style)
D21 D23 (No Through Hole)
D22 9940.0010 FH-305 2” SST Roller Tubing
D24 D23 9940.0003 1 1/2” SST Roller Tubing
D25a D25b D24 9940.0009 FH-304 Roller Rod
D25a 9940.0071 LEFT HAND roller mounting block (plated)
D26 D25b 9940.0072 RIGHT HAND roller mounting block (plated)
D26 9939.1062 Assy C2 Roller with 1 1/2” Diam. Roller
(Style 2) (Specify Model)

GUIDEMASTER PARTS AND BRACKETS

G1 G2 G3
ITEM PART DESCRIPTION

G1 9945.0026 GM Ball Bearing (For GM-609 Roller)

G5 G2 9945.0044 GM-108 Ball Bearing (For GM-109 Roller)
G6
G7 G3 9945.0019 GM-609 Roller w/GM Bearing
G5 9944.0040 GM-700 Guide Arm Body Assy w/Mtg. Yoke
G6 9945.0009 GM Mounting Yoke w/Bronze Bushing
G10 G11
G8 G7 9945.0011 GM Oil-Impregnated Bronze Bushing
G8 9945.1001 GM Roller Body w/Mtg. Bolts
G10 9945.1005 GM Roller Mtg. Bolts
G11 9945.1003 Pinlock assy for GM 700
G12 G12 9945.1004 GM Roller Bolt Mounting Plate
G16
G15
G15 9945.0035 GM Cross Member Assembly (3 Pieces)
(Specify Model)
G16 9945.0036 GM Bottom-Wind Brackets (Pair)
G17 9945.0037 GM Top-Wind Brackets (Pair)
G17 G18 9939.0069 Assy. “B” Roller for Bottom-Wind
Guidemaster Reels (specify model)
G18

7-82
www.wertswelding.com
 REWIND ASSEMBLIES, BRAKES, RATCHETS
F1 F2 F3 F4 ITEM PART DESCRIPTION
F1 Specify 30° Rewind Bracket (specify right or left)
F2 9914.0233 Vertical Rewind Bracket Only
F3 9914.0372 H-26 Ring Gear
F4 9914.0382 H-28 Ring Gear
F5 F6 F5 9914.0393 H-27 Pinion Gear
F7 F8 F9
F6 9914.0403 H-29 Pinion Gear
F7 Spec. Model Pinion Shaft
F8 9914.0351 Pinion Shaft Collar
F10 F9 9914.0618 Pinion Gear Guard (E-Coated)
F11
F10 9914.0243 H-2A Pinion Shaft Bearing
F12
F14 F11 9914.0413 H-30A Brake Wheel
F12 9914.0451 H-31 Brake Spring
F13
F13 9914.0433 H-3 Brake Pad
F14 9914.0011 H-18 Hand Crank
F15 F16 F15 9947.0020 Air Caliper Brake
F18 F19 Not Shown 9947.0001 Manual Caliper Brake
F16 9947.0024 Pair of Brake Pads (For Air Caliper Brake)
F18 9947.0036 Comet Brake Strap Only (IV Style)
F23
F19 9947.0038 Comet Brake Iron Hub (IV Style)
F22
F21 F21 9922.0015 Ratchet Wheel (new 2 position)
F22 9965.0030 PL-1 Pinlock
F23 9965.0036 PL-4 Pinlock with Extended Mounting Ears
F24 9947.0090 Comet Brake Assembly
F25 (Bearing Mounted Style)
Not Shown 9947.0043 Comet Brake Assembly
(Bearing Mounted Style with Stub Shaft)
F25 9947.0130 Cam Lever Drag Brake Kit
F24 3-Position Lever
(including mounting hardware)
Not Shown 9922.0008 Ratchet Locking Spring
F28 F26 9922.0301 Left Hand Pawl & Pin (304 SST)
F27 9922.0302 Right Hand Pawl & Pin (304 SST)
F26 F27 F28 9922.0311 Left Hand Ratchet Locking Assy for HGR,
SCR, SGCR, Reverse N-Series
F29 9922.0312 Right Hand Ratchet Locking Assy for N-series
F30 9922.0321 Left Hand Ratchet Locking Assy for
F31 Rollform Reels
F29 F31 9922.0322 Right Hand Ratchet Locking Assy for
F30
Reverse Rollform Reels

7-83
www.wertswelding.com
 P15A-00130

9917.0004

P15A-00170
9917.00200

PB-1
9917.0001

9917.0024

50 AMP - 9917.0021
70 AMP - 9917.0022

7-84
www.wertswelding.com
 7-85
www.wertswelding.com
 Model Numbering System
Model number coding description
MSA-7-A-10

Accessory Construction
Meter Type Case Material Working Pressure Meter Size
Configuration Application Class
M = meter Blank = other than steel Blank = 150 psi 4 = 30 gpm 15 = 200 gpm 60 = 600 gpm
A, C, I, K 1, 2, 3, 10 etc.
S = steel case AA = 285 psi 5 = 60 gpm 25 = 300 gpm 75 = 700 gpm
(see chart below) (see table on p. 6)
A = 350 psi 7 = 100 gpm 30 = 350 gpm 80 = 800 gpm
B = 720 psi 10 = 150 gpm 40 = 450 gpm 120 = 1000 gpm
C = 1440 psi
Standard accessory configurations A, C, I, K

M / MA - 7 - A M / MA - 7 - C M / MA - 7 - I M / MA - 7 - K
A = Meter with counter C = Meter with counter, strainer I = Meter with counter, preset K = Meter with counter, preset
and air eliminator counter and preset valve counter and preset valve, strainer
and air eliminator

Optional Accessories:
Printer, Strainer Optional Accessories: Optional Accessories: Optional Accessories:
Printer Printer, Strainer Printer
Mounting arrangements

LC meters may be mounted in a varity of configurations, as shown below. Do not position the meter on its side, i.e., with
cover plate face down or up.
*

* ONLY AVAILABLE ON DIRECT MOUNT PULSER MODELS OR MODELS LESS RESET

COUNTER.
Note: regardless of meter mounting configurations, accessories such as the air/vapor eliminator must always be mounted
in a vertical orientation to permit proper operation of the float-actuated apparatus.

7-86
www.wertswelding.com
 M-5 METER
PARTS LIST

7-87
www.wertswelding.com
 M-7 METER
PARTS LIST

7-88
www.wertswelding.com
 M-15 METER
PARTS LIST

7-89
www.wertswelding.com
 AIR ELIMINATOR

STRAINER ASSEMBLIES

HIGH CAPACITY STRAINER ASSEMBLY

7-90
www.wertswelding.com
LCR-II REGISTER

PN. 82597: Pulser Field Install Kit

LCR-600 REGISTER

LAP PAD EPSON SLIP PRINTER

#E40301 CALL FOR INFORMATION

7-91
www.wertswelding.com
 7-92
www.wertswelding.com


     
      

    

                       

                      ! 

" # $ % & ' ( ) * + , ' + ) ( * ( - . / ( ) 0 1 2 3 . 4 . , * % 5 % 6 $ 7 8 & 9 : ' ; < % # = > ' ; ? @ ' A @ ' B A @ ' / A B C A @ @ D @ @ /

9 9 % & F + * 2 G H ' + ) ( * ( - . / ( ) 0 1 2 3 . 4 . , * % 5 % 6 $ 7 8 " 9 : ' ; < $ $ > ' ; ? @ ' A @ ' B A I ' D I J
E E

$ 9 $ 7 8 % 9 9 : ' ; < K # 9 > ' ; ? @ ' A @ ' B A @ ' / A I ' A I J A B C A @ @ D @ @ /

$ & @ ' B D @ ' /

2” = 150 GPM (567 LPM)

K 9 K 7 8 $ 9 9 : ' ; < " 9 > ' ; ? @ ' A @ ' B A @ ' / A I ' A I J D B C
E

K & @ ' B D @ ' /

3” = 300 GPM (1135 LPM)

L 9 @ ' A @ ' B A @ ' / A I ' A I J D B C

4” = 500 GPM (1893 LPM)

L & > ' ; ? @ ' B D @ ' /

4” = 600 GPM (2271

   

@ ' @ * 2 , M 2 G M ' . * G + 1 . N 4

@ ' B @ * 2 , M 2 G M ' . * G + 1 . N 4 < B - ( 2 * ( + , C N . 1 ?

@ ' / @ * 2 , M 2 G M ' . * G + 1 . N 4 < / N 3 * ( 1 . I G + , ?

I ' I , M N ) * G ( 2 1 ' G + M N 3 * ) O

I J I , M N ) * G ( 2 1 ' G + M N 3 * ) P ( * Q J 2 G R + , : G 2 0 Q ( * . S . 2 G ( , T ) O

B C B 1 1 C . G G + N )

@ @ @ * 2 ( , 1 . ) ) @ * . . 1

@ @ / @ * 2 ( , 1 . ) ) @ * . . 1 < / ( . ) . 1 U V Q 2 N ) * C 1 N ( M 6 B M R 1 N . ? W

            X  Y Z      

$ ; . * . G 2 , M F . T ( ) * . G

K ; . * . G A F . T ( ) * . G 2 , M ' G ( , * . G

L ; . * . G A F . T ( ) * . G 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G

L F ; . * . G A F . T ( ) * . G 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

L @ ; . * . G A F . T ( ) * . G 2 , M U 1 . 3 * G + , ( 3 B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G O

L \ ; . * . G A F . T ( ) * . G 2 , M U 1 . 3 * G + , ( 3 B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

& ; . * . G A F . T ( ) * . G 2 , M @ * G 2 ( , . G

" ; . * . G A F . T ( ) * . G A ' G ( , * . G 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G

" F ; . * . G A F . T ( ) * . G A ' G ( , * . G 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

; . * . G A F . T ( ) * . G A ' G ( , * . G 2 , M @ * G 2 ( , . G
E

# ; . * . G A F . T ( ) * . G 2 , M ' G . ) . * \ 2 1 - .

= ; . * . G A F . T ( ) * . G A ' G ( , * . G 2 , M ' G . ) . * \ 2 1 - .

% 9 ; . * . G A F . T ( ) * . G A ' G . ) . * \ 2 1 - . 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G

% 9 F ; . * . G A F . T ( ) * . G A ' G . ) . * \ 2 1 - . 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

% 9 @ ; . * . G A F . T ( ) * . G A ' G . ) . * \ 2 1 - . 2 , M U 1 . 3 * G + , ( 3 B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G O

% 9 \ ; . * . G A F . T ( ) * . G ' G . ) . * \ 2 1 - . 2 , M U 1 . 3 * G + , ( 3 B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

% % ; . * . G A F . T ( ) * . G A ' G ( , * . G A ' G . ) . * \ 2 1 - . 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 @ * G 2 ( , . G

% % F ; . * . G A F . T ( ) * . G A ' G ( , * . G A ' G . ) . * \ 2 1 - . 2 , M B ( G U 1 ( 4 ( , 2 * + G 6 [ ( T Q \ + 1 N 4 . @ * G 2 ( , . G O W

% $ ; . * . G A F . T ( ) * . G A ' G . ) . * \ 2 1 - . 2 , M @ * G 2 ( , . G

% K ; . * . G A F . T ( ) * . G A ' G ( , * . G A ' G . ) . * \ 2 1 - . 2 , M @ * G 2 ( , . G

               

B ; . * . G B ) ) . 4 R 1 H P ( * Q \ . . M . G F + + * F . T ( ) * G 2 * ( + ,

S ; . * . G B ) ) . 4 R 1 H 1 . ) ) \ . . M . G F + + * F . T ( ) * G 2 * ( + ,

J ; . * . G B ) ) . 4 R 1 H 2 , M / G ( - . J + N 0 1 . G ] + G N ) . P ( * Q ; ( M ^ J + 4 A \ . . M . G F + + * A > ( _ N ( M J + , * G + 1 ) A > ( _ N ( 0 A . * 3 `

/ ; . * . G B ) ) . 4 R 1 H P ( * Q 2 / ( G . 3 * ; + N , * ' N 1 ) . a G 2 , ) 4 ( * * . G ( , = * + $ L \ / J @ * 2 , M 2 G M b & \ / J c 0 * ( + , 2 1

U ; . * . G B ) ) . 4 R 1 H P ( * Q a J @ K 9 9 9 U 1 . 3 * G + , ( 3 F . T ( ) * G 2 * ( + ,

–
& / . T G . . ; + N , *
E

C ; . * . G B ) ) . 4 R 1 H P ( * Q a J @ K 9 9 9 U 1 . 3 * G + , ( 3 F . T ( ) * G 2 * ( + ,

–
= 9 / . T G . . ; + N , *

: ; . * . G B ) ) . 4 R 1 H P ( * Q / ( G . 3 * ; + N , * ' N 1 ) . a G 2 , ) 4 ( * * . G 2 , M a J @ K 9 9 9 U 1 . 3 * G + , ( 3 F . T ( ) * G 2 * ( + ,

–
F . 4 + * . ; + N , *

  Y         

c F U : I @ a U F
d e

: % 6 % f ` @ ` : 2 1 1 + , ) < g [ c > U ?

a % 6 % 9 f ` @ ` : 2 1 1 + , ) < a U a [ @ ?
e

> % 6 % > ( * . G )

U % 6 % 9 > ( * . G )

/ % 6 % / . h 2 1 ( * . G )

I % 6 % I 4 0 . G ( 2 1 : 2 1 1 + , )

' % 6 % ' + N , M )

J % 6 % J N R ( 3 ; . * . G )

i
                        j              Z  !   X     !    k

                  

 Z             

5 c U
e e

% F . T ( ) * . G ; + N , * % ^ % / G H F . . M ' N 1 ) . G f > < ; . * . G c G ( . , * 2 * ( + , B ?

$ F . T ( ) * . G ; + N , * % 9 ^ % / G H F . . M ' N 1 ) . G f > < ; . * . G c G ( . , * 2 * ( + , B ?

K F . T ( ) * . G ; + N , * % 9 9 ^ % @ + 1 ( M @ * 2 * . ' N 1 ) . G f > < ; . * . G c G ( . , * 2 * ( + , B ?

L F . T ( ) * . G ; + N , * % 9 9 ^ % @ + 1 ( M @ * 2 * . ' N 1 ) . G B a U < ; . * . G c G ( . , * 2 * ( + , B ?
d

      

5 c U
e e

B B ( G / ( ] ] . G . , * ( 2 1 J Q . 3 h \ 2 1 - . O W

J S 2 3 h ' G . ) ) N G . J Q . 3 h \ 2 1 - . < @ 0 G ( , T > + 2 M . M g 2 ] . G a H 0 . ?

a B N * + 4 2 * ( 3 a . 4 0 . G 2 * N G . J + 4 0 . , ) 2 * ( + , < B a J ? l ( * ^ F a / a . 4 0 . G 2 * N G . ' G + R . D a Q . G 4 + P . 1 1

O m n n o p q r o s t u p v w x q x o p y u s

W y p q r z r { u r | u x v { q } w x q x o q s ~ x   €  € { x  x u x ‚ } r ƒ  q t u ƒ { € „ r € | u ƒ x …

7-93
  
700-20 / 700-25 Meter Assembly

7-94
700-20 / 700-25 Meter Assembly
           

      
    

     

                  

         ! "

                      
  #   $   #   $   #   $   #   $   #   $   #   $   #   $   #   $   #   $   #   $

 %         & ' ( 

            
                                                  

  *  , 

)  +           
    $     $     $     $     $     $     $     $     $     $

/ " " " " " " " " " "

- .            
                                        

   (   0  

            
     #     #     #     #     #     #     #     #     #     #

"    ( 1   /

 +
                                                            

 %        *   (      
                   

        
                              

 ( 2  

     -    -    -    -    -    -    -    -    -    -
#  # # $  # # $  # # $  # # $  # # $  # # $  # # $  # # $  # # $  # # $

  ( (         ! - - - -
                   

 - - - - - -
$                               

  *  ,     

  +  
                                                            

   3       ! - - - -
                   

   - - - - - - -
                             

 /     

  

   
                                                            

 4 /   / (      
                   

 )          
                             

 4 / 
  (     6 7     ) 
                        

 -      8      
 5                         

1  4 / 
  (     6 
     

 -             
5                                        

 4 / 9  /    
                  #  $     

    
       $      $                $

" (  / - - - - - - -
                                  

  - - -
               

     *  

   ) ) - )
                                                        


   ! " " " " " " " " " " "

   
#                                                  

1   ( (   
   !  "  "  "  "  "  "  "  "  "  "

  -
#                                                  

    *  

   ) ) )
$                                                         

         !

    -  -  -  -  -  -  -  -  -  -
                                          

1   / (  

  ) ) ) ) ) 
                                                       

  *   9  / 
                     #       

  
                              

    /

)               -   
                                           

(  2   

-  +          
 #     #     #     #     #     #     #     #     #     #     #


   !

  -          
                                                   

1   ( (   
   !          

 -          
                                                   

" " " " " " " " " " "

Flange, 2” NPT
    
                                                

" 1 " " " " " " " " " "

Flange, 2” BSPT
) )   ) )      )  
                                      

( /  9  /  )  )  )   )
               #     

    )  ) 
                          

1 (   4 / 0  

 )  )  )  )  )  )  ) ) ) )  ) 
 #                                         

    :   4 ;       
                                    

 )   
 $               

 
(   &   0  

) -  -  -  -  -  -  - - ) -  - 
                                          

    <  
     #      #      #      #      #      #      #

)   )
     #      #      #

 
(   &      

)  - - - -  -  -  -  - - - -
                                              

1 (   4 /    

) )   ) ) ) )  )  )  )  ) - ) )
                                            

:   4 2   

) - + -          
                                                 

7-95
700-30 / 700-35 Meter Assembly

7-96
 700-30 / 700-35 Meter Assembly
           

 

      
  

              
    

     ! " # $ % & " ' (  )  * + * , -  )  * + * , -  )  * + * , -  )  * + * , -  )  * + * , -  )  * + * , -  )  * + * , -  )  * + * , -

* . /  0 1 " & . 0 0 " 2 3 4 5  , 6 6  6 6 , 6 6  6 6 , 6 6  6 6 , 6 6  6 6 , 6 6  6 6 , 6 6  6 6 , 6 6  6 6 , 6 6  6 6

7 8 & 9 : " $ ; # < 1  , 6 6 6  - , 6 6 6  - , 6 6 6  - , 6 6 6  - , 6 6 6  - , 6 6 6  - , 6 6 6  - , 6 6 6  -

= > )  9  ?  , 6 6 6  ( , 6 6 6  ( , 6 6 6  ( , 6 6 6  ( , 6 6 6  ( , 6 6 6  ( , 6 6 6  ( , 6 6 6  (

. % " 1 # 4 A # % " B " # &  , 6 6 6  + , 6 6 6  + , 6 6 6  + , 6 6 6  + , 6 6 6  + , 6 6 6  + , 6 6 6  + , 6 6 6  +

@

( . % " 1 # 4 C  0 ; 9  ? * , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6 , 6 6 6 * 6

, . /  0 1 " & D  : " & E 4 # 1 "  , 6 6 6  , , 6 6 6  , , 6 6 6  , , 6 6 6  , , 6 6 6  , , 6 6 6  , , 6 6 6  , , 6 6 6  ,

+ $ " # 4 F 9 & "   )   + + = -  )   + + = -  )   + + = -  )   + + = -  )   + + = -  )   + + = -  )   + + = -  )   + + = -

- 8 & 9 4 4 " ! " # $ % & " ' * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = * , 6 6 6 = *

 6 8 & 9 : " $ ; # < 1  " 1 # 9  " &  , 6 6 6 * * , 6 6 6 * * , 6 6 6 * * , 6 6 6 * * , 6 6 6 * * , 6 6 6 * * , 6 6 6 * * , 6 6 6 * *

  ! " # G    1 $ % & " ' = , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6 , 6 6 6 = 6

 *  " ? 9 0 1 " & $  H H  & 1  , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6 , 6 6 * 6 6

 7 E # % I 9  ?  " 1 # 9  9  ? E 4 # 1 "  , 6 6 6  , 6 6 6  , 6 6 6  , 6 6 6  , 6 6 6  , 6 6 6  , 6 6 6  , 6 6 6 
@ @ @ @ @ @ @ @

 = . * J  E # % I 9  ? D # H 0  4 " . 0 0 5 K  , 6 6  6 , 6 6  6 , 6 6  , 6 6  , 6 6  , 6 6  , 6 6  6 , 6 6 
@ @ @ @ @ @ @ @ @ @ @ @ @

 = C  J  E # % I 9  ? D # H 0  4 " . 0 0 5 K  , 6 6  , 6 , 6 6  , 6 , 6 6  , , 6 6  , , 6 6  , , 6 6  , , 6 6  , 6 , 6 6  ,
@ @ @ @ @

 E # % I 9  ? L ) & 9  ?  , 6 6 6 6 - , 6 6 6 6 - , 6 6 6  6 , 6 6 6  6 , 6 6 6  6 , 6 6 6  6 , 6 6 6 6 - , 6 6 6  6
@

 ( E 4  ? * , 6 6 6 * = , 6 6 6 * = , 6 6 6 * = , 6 6 6 * = , 6 6 6 * = , 6 6 6 * = , 6 6 6 * = , 6 6 6 * =

 , A &   1 D  : " &  , 6 7 6 6 , 6 7 6 6 , 6 7 6 7 , 6 7 6 6 , 6 7 6 6 , 6 7 6 7 , 6 7 6 6 , 6 7 6 7

@ @ @ @ @ @ @ @

 + . D # H $ % & " '  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  ( , 6 7 6  (

 + C 8 & 9 4 4 " D # H $ % & " ' = , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8 , 6 7 6  ( 8

 -  " # & D  : " &  , 6 7 6 , 6 7 6 , 6 7 7 , 6 7 6 , 6 7 6 , 6 7 7 , 6 7 6 , 6 7 7

@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @

* 6     ! " # $ % & " '  * , 6 * 6  = , 6 * 6  = , 6 * 6  = , 6 * 6  = , 6 * 6  = , 6 * 6  = , 6 * 6  = , 6 * 6  =

*  C " # & 9  ? E 4 # 1 " * , 6 7 * 7 6 , 6 7 * 7 , 6 7 * 7 , 6 7 * 7 6 , 6 7 * * , 6 7 * * , 6 7 * * , 6 7 * *

@ @ @ @ @ @

* * D  : " & L ) & 9  ? * , 6 7 6 6  , 6 7 6 6  , 6 7 6 6 * , 6 7 6 6 * , 6 7 6 6 * , 6 7 6 6 * , 6 7 6 6  , 6 7 6 6 *

* 7 !   0 9  ?  , 6 7   6 , 6 7   6 , 6 7   7 , 6 7   6 , 6 7   6 , 6 7   7 , 6 7   6 , 6 7   7

* = A 4 # 1 F # 0 ; " & + , 6 7 6  + , 6 7 6  + , 6 7 6  + , 6 7 6  + , 6 7 6  + , 6 7 6  + , 6 7 6  + , 6 7 6  +

* D # H $ % & " ' + , 6 7 6  , , 6 7 6  , , 6 7 6  , , 6 7 6  , , 6 7 6  , , 6 7 6  , , 6 7 6  , , 6 7 6  ,

@

Flange, 3” NPT
* ( . * , 6 7 ( 6 6 , 6 7 ( 6 6 , 6 7 (  7 , 6 7 ( 6 6 , 6 7 ( 6 6 , 6 7 (  7 , 6 7 ( 6 6 , 6 7 (  7

Flange, 3” BSPT
* ( C * , 6 7 ( 6 7 , 6 7 ( 6 7 , 6 7 (   , 6 7 ( 6 7 , 6 7 ( 6 7 , 6 7 (   , 6 7 ( 6 7 , 6 7 (  

* , A 4 #  ? " L ) & 9  ? * , 6 7 6  * , 6 7 6  * , 6 7 6  7 , 6 7 6  7 , 6 7 6  7 , 6 7 6  7 , 6 7 6  7 , 6 7 6  7

* + C 4  % I 9  ?   1  & B " # &  , 6 7 7  , 6 7 7  , 6 7 7  , 6 7 7 6 , 6 7 7 6 , 6 7 7 6 , 6 7 7  , 6 7 7 

@ @ @ @ @ @ @ @

* -   1  & M  % I N  1 7 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6 , 6 7 6  6

7 6 8 9 0 H 4 # % " 2 "  1   1  & B " # & * , 6 7 =  , 6 7 =  , 6 7 =  , 6 7 = 6 , 6 7 = 6 , 6 7 = 6 , 6 7 =  , 6 7 = 

@ @ @ @ @ @ @ @

7    1  & O " 5 7 , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 + , 6 7 6 6 +

7 * 8 9 0 H 4 # % " 2 "  1   1  & * , 6 7 = 6 , 6 7 = 6 , 6 7 = * * , 6 7 =  6 , 6 7 =  6 , 6 7 = * , 6 7 = 6 , 6 7 = * *

@ @ @ @

7 7 C 4  % I 9  ?   1  &  , 6 7 7 6 , 6 7 7 6 , 6 7 7 * * , 6 7 7  6 , 6 7 7  6 , 6 7 7 * , 6 7 7 6 , 6 7 7 * *
@ @ @ @

, 6 7 7
@ @

7 = B " # & $ H # % " & 7 , 6 7 7 , 6 7 7 , 6 7 7 , 6 7 7 , 6 7 7 , 6 7 7 , 6 7 7

@ @ @ @ @ @ @ @ @ @ @ @ @ @

7 M  % I F # 0 ; " & = , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 ,  , 6 6 6 , 
@

7-97
700-40 / 700-45 Meter Assembly

7-98
 700-40 / 700-45 Meter Assembly
           

      
    

              
    


           ! "   # " #   # " #   # " #   # " #   # " #   # " #   # " #   # " #
  $   $   $   $   $   $   $   $

 
#  %         & ' (          
                                       

 +
)   *  ,          
    $     $     $     $     $     $     $     $

 .   /  /  /  /  /  /  /  /
 -                                 

   
   (   0   1 # 2   3 .   "  "  "  "  "  "  "  "
                                

  
   (   0   5  2   3 .  " " " " " " " "
 4                                        

 +
/    (   . # # # # # # # # #
4                                        

 
 %        *   (    /  /   /  /   /  
                                   


"  ( 6       " "    " "    " "    " "    " "    " "    " "    " "
  $   $   $   $   $   $   $   $


  ( (         ! # #  #  #  #  #  #  #  # 
$                                        

 +
   *  ,        # # # # # # # # # # # # # # # #
                                


     7       !
                                                


 #   .     

    #  #  # #  #  # #  #
                                  

 
 )  3 .    . (           
                                       

  
 # 2   3 . 
  (     8         
                                        

 
  2   3 . 
  (     8         
 4                                        


  3 . 9  .     
       $      $                     $           $


 / (  . # # # # # # # # #
                                       


      *    / / ) / / ) / )
                                        

 
 " 
   !  "  /  /  /  /  /  /  /  /
                               


 "   ( (   
   !  /   /   /   /   /   /   /   / 
4                                 

      *    ) ) )
$                                             


#           !  /        
                                        


#    . (   # # ) # ) # ) # ) # # # # # # # #
4                                

# #   *   9  . #    # # #  
                                        

# )     .        )       )     )
                            

 +
# (  6    "  "  "  "  "  "  "  "  "
                                

 
# 
   !        
                                         


#   ( (   
   !                
 4                                         

Flange; 4” NPT
# / # / / /  ) / / /  ) / /  )
                                 

Flange; 4” BSPT
# / # / ) / ) "  # / ) / ) "  # / ) "  #
4                             


# ( .  9  . #  #  # #  )  )  )  # #
                                   

# " (   3 .      0    ) ) ) ) ) ) ) )
4                                        

#      :   3 ;   )        
$                                        

)  
(   &        0   #
                                                

)       <   ) " " " " " " " "

                                       

) #  
(   &        # # #   # # #
                                        

) ) (   3 .       ) ) ) # # )  )  ) # ) ) # #
4                                 

+
) :   3 6           
                                         

7-99
720-20 Strainer / 725-20 High Capacity Strainer Assembly

7-100
720-20 Strainer / 725-20 High Capacity Strainer Assembly

       

 
           

            
 

   

                   

                           

   
    

                                   

    
    "           

 !                                    

    
#
    
$   % &

    

                     

  

 &    (      

'      )    )    )    )    )    )     )

  

     *
+    (    # #

                           

   

Basket Cover, Two 1/2” NPT Ports                         

   
 , 

$   %   # #

 ! '                             

   -
    (  #  #

                       

    

      , 
%  

)  .    ! '                   

    

      , 
%     

) !  / ! '                

   

      , 
  

)  / !             

  
 
      , 


)   / !               

   

      #  

         

   
      # 

         

    
      "     #  

!          

Basket Cover, Two 1/2” NPT Ports

  #

          

  
 #  , 

$     #

! . '          

   -
    (  # #

        

    

      , 
%   # 

  / ! '         

  
 
      , 
 # 

 !  / !         

   
 
      , 
 #

   / !          

    
  *  (   

     *
+    (  

         

 
 + ( 

           

  
   (  &    (    #  #  #  

                            

  
  (  &    (  # 

)           

Flange; 3” x 2” NPT
 #  

          

Flange; 3” x 2” BSPT
 #   

  !        

 # #

3/8” x 1/2” NPT Thermowell

 #

                    
    

1/2” x 1/2” NPT Thermowell

 # # #

                          

Basket Cover, One 1/2” NPT Port

#        

                    

Basket Cover, One 1/2” NPT Port

 # 

         

7-101
720-30 Strainer & 725-30 High Volume Strainer Assembly

7-102
7-103
730 Air Eliminator Assembly; SP and SPD

7-104
 7-105
www.wertswelding.com
NOZZLES

SWIVELS

EBW HUSKY

MORRISON BROS.

7-106
www.wertswelding.com