2MXX-690-960/1710-2200-65/33-16i/19.

5i-M/M-R
EasyRET Dual-Band Antenna with Integrated RCUs - 2.0m
Model: AMB4520R2v06

Preliminary Issue
Electrical Properties
690 - 960 1710 - 2200
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 2 - 12 , continuously adjustable
at mid Tilt 15.4 15.7 15.8 16.0 18.7 19.4
Gain (dBi)
over all Tilts 15.3 ±0.5 15.6 ±0.5 15.7 ±0.5 15.8 ±0.5 18.5 ±0.8 19.2 ±0.5
Side lobe suppression for first
> 16 > 18 > 17 > 17 > 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 63 ±2.5 60 ±2.5 60 ±2.5 59 ±3 32 ±1 30 ±1
Vertical 3dB beam width (°) 10.6 ±0.7 9.5 ±0.5 9.2 ±0.4 8.7 ±0.4 6.2 ±0.5 5.6 ±0.4
VSWR < 1.5
Horizontal beam centers (°) / ± 30 ± 26
Cross polar isolation (dB) ≥ 25 Same beam: ≥ 25
Beam to beam isolation(dB) / ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 21 > 24 > 24 > 24 > 28 > 28
Cross polar ratio (dB) 0° > 17 > 18 > 17 > 17 > 17 > 15
250 (at 50℃ ambient
Max. power per input (W) 500 (at 50℃ ambient temperature)
temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50

Multi-beam
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet in XML format is available.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2022 x 359 x 178 106

Packing dimensions (H x W x D) (mm) 2400 x 430 x 255

Antenna weight (kg) 25.0
Clamps weight (kg) 3.6 (2 nuits)
Antenna packing weight (kg) 39.7 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 to +65
1355

Frontal : 930 (at 150 km/h)

Wind load (N) Lateral: 255 (at 150 km/h)
2022

Rear side: 755 (at 150 km/h)

Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna
Mechanical downtilt:
Downtilt kit ASMDT0D01 2.1 kg 1 (Separate packing)
0 - 12 °

209
 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06

Antenna Specifications

Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 15.9 16.0 16.1 16.4
Gain (dBi)
over all Tilts 15.7 ±0.4 15.8 ±0.5 15.9 ±0.4 16.2 ±0.5
Side lobe suppression for first
> 18 > 19 > 18 > 18
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ±4 67 ±4 67 ±3 66 ±4
Vertical 3dB beam width (°) 9.5 ±0.6 8.8 ±0.6 8.4 ±0.6 7.8 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26
Cross polar ratio (dB) 0° > 15 > 17 > 17 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Electrical Properties
1695 - 2200 2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990 1920 - 2200 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
0 - 10 , continuously
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
adjustable
at mid Tilt 17.3 18.1 16.9 17.1 17.2 17.3
Gain (dBi)
over all Tilts 17.1 ±0.6 17.9 ±0.6 16.8 ±0.6 17.0 ±0.5 17.0 ±0.5 17.2 ±0.5

Side lobe suppression for first

> 17 > 17 > 17 > 17 > 17 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 33 ±3 30 ±3 60 ±5 61 ±5 63 ±5 58 ±5
Vertical 3dB beam width (°) 7.2 ±0.5 6.5 ±0.5 6.5 ±0.6 5.8 ±0.4 5.0 ±0.5 4.8 ±0.3
VSWR < 1.5
Horizontal beam centers (°) ± 29 ± 27 /

Cross polar isolation (dB) Same beam: ≥ 25 ≥ 28

Beam to beam isolation (dB) ≥ 18 /
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 27 > 29 > 26 > 27 > 27 > 28
Cross polar ratio (dB) 0° > 15 > 17 > 17 > 20 > 20 > 20
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
* Total power : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.

210
 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06

Mechanical Properties 106

Antenna dimensions (H x W x D) (mm) 2685 x 359 x 178
Packing dimensions (H x W x D) (mm) 2985 x 425 x 255
Antenna weight (kg) 35.0
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 54.1 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey

1837
Operational temperature (℃) -40 .. +65

2685
Frontal : 1290 (at 150 km/h)
Wind load (N) Lateral: 350 (at 150 km/h)
Rear side: 1075 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Mechanical downtilt:
Downtilt kit ASMDT0F01 3.1 kg 1 (Separate packing)
0-8°

Multi-beam
Pattern sample for reference

690 - 960 MHz 1695 - 2690 MHz

1695 - 2200 MHz 1695 - 2200 MHz

(b2-30) (b1+30)

211
 2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/33-
17i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 6 (motor activated, 12V)
Power consumption (W)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM

Integrated RET S/N:

HWMxxx…..…b1
Ly1 Ry2
HWMxxx……Ly1 r1

HWMxxx…..…r1

HWMxxx……Ry2 b1 b2

HWMxxx…..…b2
r - Red y - Yellow b - Blue
L - Left array R - Right array

212
 2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/1695-
2200-65/65/65/65/65/33-17i/17 i/17i/17.5i/17.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Model: AMB4519R4v06
Preliminary Issue
Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable
at mid Tilt 15.9 16.0 16.1 16.4
Gain (dBi)
over all Tilts 15.7 ±0.4 15.8 ±0.5 15.9 ±0.4 16.2 ±0.5

Side lobe suppression for first

> 18 > 19 > 18 > 18
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ±4 67 ±4 67 ±3 66 ±4
Vertical 3dB beam width (°) 9.5 ±0.6 8.8 ±0.6 8.4 ±0.6 7.8 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26
Cross polar ratio (dB) 0° > 15 > 17 > 17 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Electrical Properties

Multi-beam
1695 - 2200 2 x (1695 - 2200) 2 x (2490 - 2690)
Frequency range (MHz)
1695 - 1990 1920 - 2200 1695 - 1990 1920 - 2200 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 2 - 12 , continuously adjustable , each band separately
at mid Tilt 17.3 18.1 16.8 17.0 17.3
Gain (dBi)
over all Tilts 17.1 ±0.6 17.9 ±0.6 16.6 ±0.4 16.8 ±0.4 17.1 ±0.5
Side lobe suppression for first
> 17 > 17 > 17 > 17 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 33 ±3 30 ±3 63 ±4 61 ±4 60 ±5
Vertical 3dB beam width (°) 7.2 ±0.5 6.5 ±0.5 6.4 ±0.7 5.8 ±0.4 4.9 ±0.4
VSWR < 1.5
Horizontal beam centers (°) ± 29 ± 27 /

Cross polar isolation (dB) Same beam: ≥ 25 ≥ 28

Beam to beam isolation (dB) ≥ 18 /
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 27 > 27 > 25 > 25 > 24
Cross polar ratio (dB) 0° > 15 > 17 > 17 > 17 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature) *
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

* Total power : 1000 W (at 50℃ ambient temperature)

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.

213