Scribd
Upload
103 views2 pages

Dynapac CP275 Specs for Engineers

The Dynapac CP275 is a pneumatic roller with a maximum operating mass of 14,000 kg and maximum ballast of 16,000 kg. It has two Cummins engines providing a total of 220 hp and features drum brakes, variable displacement hydraulics, and optional spray systems. Key dimensions include a 2370 mm wide rolling width and 4250 mm wheelbase.

Uploaded by

Nadir Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views2 pages

Dynapac CP275 Specs for Engineers

The Dynapac CP275 is a pneumatic roller with a maximum operating mass of 14,000 kg and maximum ballast of 16,000 kg. It has two Cummins engines providing a total of 220 hp and features drum brakes, variable displacement hydraulics, and optional spray systems. Key dimensions include a 2370 mm wide rolling width and 4250 mm wheelbase.

Uploaded by

Nadir Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Dynapac CP275

Pneumatic rollers

Technical data

Masses Engine

Mass with max. ballast 30000 kg Manufacturer/Model Cummins QSB4.5


Operating mass 14000 kg Rated power, SAE J1995 97 kW (130 hp ) @ 2200 rpm
Type Turbocharged and Charge Air Cooled
Compaction
Engine
Ballast mass 16000 kg
Rolling width 2370 mm Electrical system 24 V
Tyre overlap 52 mm Fuel tank capacity 320 l
Tyre pressure, max 780 kPa Manufacturer/Model Cummins 4BTAA3.9-C125
Tyre pressure, min 380 kPa Rated power, SAE J1995 93 kW (125 hp ) @ 2200 rpm
Tyre type (smooth) 13/80-20 Type Turbocharged and Charge Air Cooled
Water spray system, spray nozzle One per tyre
Water spray system, tank capacity 600 l Hydraulic system
Water spray system, type Pressurized
Axial piston pump with variable displacement. Axial
Wheel loads, with max. ballast 3333 kg Driving
piston motor with variable displacement.
Wheel loads, without ballast 1556 kg Parking/
Emergency Failsafe multidisc brakes in gear box
brake
Traction
Service
Drum brakes
brake
Speed high 18 km/h
Steering Gear pump with constant displacement.
Speed low 7 km/h

Find us locally at www.dynapac.com


We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.
The above information is a general description only, all informations are supplied without liability.

dynapac_cp275_en-20210929.121644.pdf 2021-09-29 12:16


Dynapac CP275
Pneumatic rollers

Technical data

Dimensions

A. Wheelbase 4250 mm
B. Width 2370 mm
H1. Height, with canopy/cab 3080 mm
H2. Height, w/o canopy/cab 2430 mm
K. Ground clearance 350 mm
L. Length 5310 mm
R. Turning radius, outside 9000 mm

Optional equipment

■ Air on the run


■ Oil spray system
■ Hollow ballast box
■ Concrete ballast box
■ Steel ballast box

Find us locally at www.dynapac.com


We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.
The above information is a general description only, all informations are supplied without liability.

dynapac_cp275_en-20210929.121644.pdf 2021-09-29 12:16

You might also like