Scribd
Upload
219 views2 pages

Dynapac CA300D Dynapac CA300D: Single Drum Vibratory Rollers Single Drum Vibratory Rollers

The Dynapac CA300D is a single drum vibratory roller. It has a maximum operating mass of 13,800 kg powered by a 82 kW engine. It features a drum diameter of 1543 mm and can achieve speeds between 0-5 km/h in dual, TC, or AS modes. The roller provides 38 kg/cm of static linear load and has a nominal vibration amplitude of 1.7 mm or 0.8 mm with a frequency of 33 Hz for both amplitudes.

Uploaded by

Nadir Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
219 views2 pages

Dynapac CA300D Dynapac CA300D: Single Drum Vibratory Rollers Single Drum Vibratory Rollers

The Dynapac CA300D is a single drum vibratory roller. It has a maximum operating mass of 13,800 kg powered by a 82 kW engine. It features a drum diameter of 1543 mm and can achieve speeds between 0-5 km/h in dual, TC, or AS modes. The roller provides 38 kg/cm of static linear load and has a nominal vibration amplitude of 1.7 mm or 0.8 mm with a frequency of 33 Hz for both amplitudes.

Uploaded by

Nadir Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Dynapac CA300D

Single drum vibratory rollers

Technical data

Masses Engine

Max. operating mass 13800 kg Manufacturer/Model Cummins 4BTA 3.9C (*)


Operating mass (incl. ROPS) 12550 kg Type Water cooled turbo Diesel
Module mass (front/rear) 8100 kg/4450 kg Fuel tank capacity 250 l
Rated power, SAE J1995 82 kW (110 hp ) @ 2200 rpm
Traction
Hydraulic system
Speed range (Dual/TC/AS) 0-5
Tyre size (8 ply) 23,1x26 Axial piston pump with variable displacement.
Vibration
Axial piston motor with constant displacement.
Theor. gradeability 55 %
Axial piston pump with variable displacement.
Vertical oscillation ±9° Axial piston motor with constant displacement.
Driving
Radial piston motors with constant displacement
(D, PD).
Compaction
Steering Gear pump with constant displacement.
Static linear load 38 kg/cm Service brake Hydrostatic in forward and reverse lever.
Nominal amplitude (high/low) 1.7 mm/0.8 mm Parking/
Emergency Failsafe multidisc brake in rear axle.
Vibration frequency (high/low amplitude) 33 Hz/33 Hz brake
Centrifugal force (high/low amplitude) 300 kN/146 kN

Find us locally at www.dynapac.com


We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.
The above information is a general description only, all informations are supplied without liability.

dynapac_ca300d_en-20180423.135149.pdf 2018-04-23 13:51


Dynapac CA300D
Single drum vibratory rollers

Technical data

Dimensions

A. Wheelbase 2879 mm
B1. Width, front 2384 mm
B2. Width, rear 2130 mm
D. Drum diameter 1543 mm
H2. Height, w/o ROPS/cab 2190 mm
K1. Ground clearance 453 mm
K2. Curb clearance 495 mm
L. Length 5550 mm
O1. Overhang, right 127 mm
O2. Overhang, left 127 mm
R1. Turning radius, outside 5400 mm
R2. Turning radius, inside 3100 mm
S. Drum shell thickness 35 mm
W. Drum width 2130 mm
α. Steering angle ±38°

Find us locally at www.dynapac.com


We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.
The above information is a general description only, all informations are supplied without liability.

dynapac_ca300d_en-20180423.135149.pdf 2018-04-23 13:51

You might also like