Lutz Drum and Container Pumps

and Eccentric Screw Pumps

Certified solutions
for the food and beverage industry

PURE

SANITARY
SANITARY

Safety is our Concern

 Lutz pumps and flow meters
for the food industry

During food production, raw materials and finished food products come into contact with various
objects and materials, and must be suitable for this. This also includes devices and machine parts
for commercial food production. These are defined as “food contact materials” and are specified in
food product legislation.

Regulation (EC) 1935/2004

Pumps and flow meters in contact with food products are also considered to be food contact
materials and are thus subject to strict legal regulations. In accordance with EU Regulation no.
1935/2004, these are to be produced in accordance with good manufacturing practice and may
EC 1935/2004
not release substances which pose a hazard to the health, cause unacceptable changes to the
food products or impair their odour or taste.

Lutz drum pumps, flow meters and accessories meet the requirements of Regulation (EC) 1935/2004
and bear the “glass and fork” symbol to indicate their suitability for foodstuffs. The associated
Regulation (EC) 10/2011 on plastics in contact with foodstuffs lists the migration values of chemicals
which may not be exceeded in defined reagent tests.

FDA approval
The Food and Drug Administration in the USA certifies materials and substances and also defines
limit values for extractable substances which must be complied with, as is the case with elastomers
for aqueous or fatty food products (21 CFR 177.2600).

3-A Sanitary Standard

Beyond the safety of the materials used, the 3-A Sanitary Standard places stringent design re-
quirements calling for a hygienically flawless and easy-to-clean design. Lutz 3-A Sanitary pumps
consistently meet the requirements for hygienic design and are certified in accordance with the
02-10 current version of the "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps, Number
02-10" and are thus equipped for the international market.

Lutz 3-A Sanitary pumps are consistently designed with manually detachable, threadless connections
in areas coming into contact with liquids. They are quick and easy to dismantle for thorough cleaning
and disinfection by hand or with tools such as a water stream or cleaning machines. All products
covered in the product are easily accessible and visible.

Atex Directive
Pumps and flow meters from the PURE and Sanitary series are also available in an explosion-
proof version in accordance with ATEX Directive 2014/34/EU. They are well-suited for pumping
highly flammable liquids in food and beverage production, such as alcohols, essential oils and fla-
vourings, as well as cleaning products and disinfectants used for cleaning purposes.

2
PURE version B70V Sanitary in 3-A version

PURE SANITARY
S ANITAR

+ Physiologically safe type + Hygienically designed according

EC 1935/2004 02-10
to the latest 3-A standards
+ High surface quality
+ Easily accessible and inspectable
+ Food-safe connections
EC 1935/2004 components
+ Quick to dismantle, easy
+ Thread-free, manually detachable
to clean
quick connections
+ Also for alcoholic food products,
+ Polished metal surface
cosmetics and pharmaceuticals
and flammable cleaning products + For liquid foodstuffs and luxury
foodstuffs, pharmaceutical
substances and cosmetic
products.

3
 Lutz drum pump
PURE SS 41 in PURE version

A versatile and variable drum pump ideal for corrosive and neutral,
aqueous to slightly viscous fluids in the production and processing
of food products.

Properties:
 Materials in contact with liquids in food quality
 Shaft seal: Mechanically sealed (MS) or sealless (SL)
 Lutz hand wheel for quick motor assembly/disassembly and as
carry handle
 Optionally available with electrical or compressed air drive with
stageless speed controller
 Explosion-proof versions approved in accordance with the
ATEX Directive 2014/34/EU Category 1/2

Technical data:
 Materials: Stainless steel 1.4571, ETFE, high-grade carbon,
ceramic, FPM or alternatively EPDM
EC 1935/2004
Advantages:  Flow rate: up to 243 l/min
 Delivery Head: up to 26 m wc
+ Low weight, easy handling
 Viscosity: up to 750 mPas
+ Completely dismantable and
cleanable  Immersion depth: 700 to 2500 mm
+ Two impeller forms for flow rate
as required
+ Mechanically sealed (MS)
version suitable for crystallizing and
adhesive liquids, as well as liquids
containing solids
+ Not filled with lubricants,
preventing product contamination
+ Sealless version (SL)
is suitable for limited dry running

4
Lutz complete drum drainage pump
RE SS 41 in PURE version
PURE

Lutz RE complete drum drainage pumps allow you to remove

selected raw materials and valuable food products from drums
and containers leaving virtually no residue.

Properties:
 Materials in contact with liquids in food quality
 Optimised drum residue discharge leaving a quantity of
residue of approx. 0.1 litre
 Sealing mechanism in pump foot
 Lutz hand wheel for quick motor assembly/disassembly and
as carry handle
 Optionally available with electrical or compressed air drive
and with stageless speed controller
 Explosion-proof versions approved in accordance with the
ATEX Directive 2014/34/EU Category 1/2

Technical data:
 Materials: Stainless steel 1.4571, PTFE, ETFE, high-grade Advantages: EC 1935/2004

carbon, ceramic, FPM or alternatively EPDM

+ Maximum pump utilisation and
 Flow rate: up to 78 l/min reduced drum cleaning effort
 Delivery Head: up to 23 m wc + Completely dismantable and
 Viscosity: up to 850 mPas cleanable
 Immersion depth: 700, 1000 and 1200 mm + No leakage when the pump is
turned over or at an inclined
position
+ Also suitable for crystallizing and
adhesive liquids, as well as liquids
containing solids
+ Not filled with lubricants,
preventing product contamination

Sealing pot is open: Sealing pot is closed:

The fluid is being pumped No fluid will return after the
pump has been shut off
and removed

5
 Lutz mixing pump
PURE MP SS 41 in PURE version

Lutz MP mixing pumps combine the function of agitator and

pump in a single device. They are specifically developed for
mixing and pumping food products which tend to form sediment
after long periods of standing and must be homogenised before
being processed.

Properties:
 Materials in contact with liquids in food quality
 For emulsions, dispersions, suspensions and colours which
tend to form sediment
 Mixing apertures in the outer pipe can be opened and closed
using a lever below the hand wheel
 Lutz hand wheel for quick motor assembly/disassembly and
as carry handle
 Optionally available with electrical or compressed air drive
with stageless speed controller
 Explosion-proof versions approved in accordance with the
EC 1935/2004
Advantages: ATEX Directive 2014/34/EU Category 1/2
+ Agitator and pump in a single
device Technical data:
+ Can change function during  Materials: Stainless steel 1.4571, PTFE, ETFE,
ongoing operation without having to high-grade carbon, ceramic, FPM or alternatively EPDM
be switched  Flow rate: up to 216 l/min
+ High mixing performance and flow  Delivery Head: up to 14.5 m wc
rate for thorough homogenisation  Viscosity: up to 650 mPas
and rapid drainage
 Immersion depth: 1000 and 1200 mm
+ Completely dismantable and
cleanable
+ Also suitable for crystallizing and
adhesive liquids, as well as liquids
containing solids
+ Not filled with lubricants,
preventing product contamination
Mixing apertures open: Mixing apertures closed:
The fluid is being mixed and The fluid is being pumped
pumped

6
Lutz eccentric screw pump
HD-E SS in PURE version
PURE

The Lutz HD-E combines the advantages of a handy drum pump and
the gentle operation of a robust eccentric screw pump. Ideal for pum-
ping viscous raw materials and food products.

Properties:
 Displacement pump using the eccentric screw principle
 Materials in contact with liquids in food quality
 Low pulsation, even pumping flow
 Practically no abrasive effect on the medium
 Compact dimensions
 Easily detachable outer pipe
 High-performance single-phase 230 V/ 50 Hz motor
or oil-free compressed air motor

Technical data:
 Materials: Stainless steel 1.4571, PTFE, NBR, FPM
 Flow rate: up to 20 l/min
 Pumping pressure: up to 4 bar Advantages: EC 1935/2004

 Viscosity: 500 to 4000 mPas + Ideal for slightly to moderately

viscous liquids
 Immersion depth: 1000 mm
+ Gentle product pumping
+ Quiet operation
+ Easy handling
+ Simple cleaning without tools
+ Not filled with lubricants,
preventing product
contamination

The pumping principle:

A metallic eccentric screw rotates in an elastomer
or solids stator. The rotation leads to chambers
being formed in which the liquids are enclosed
and carried towards the pump outlet.

7
 PURE

Lutz eccentric screw pump

B70V in PURE version

Lutz B70V PURE series eccentric screw pumps are well-suited

for liquids which are highly viscous or susceptible to abrasion,
as well as liquids with and without fibre or solid content. Quiet-
running, low-wear three-phase or compressed air drives, or
reduction gear and universal drive for mobile use.

Properties:
 Displacement pump using the eccentric screw principle
 Materials in contact with liquids in food quality
 Low pulsation, even pumping flow
 Practically no abrasive effect on the medium
 Easily detachable outer pipe
 For mobile and stationary use
 Optionally available with integrated frequency converter

Technical data:
 Materials: Stainless steel 1.4571, WC/SiC, NBR, FPM, PTFE
EC 1935/2004
Advantages:
 Flow rate: up to 120 l/min
+ For liquids susceptible to
 Pumping pressure: up to 10 bar
abrasion or highly viscous liquids
 Viscosity: up to flowability limit
+ Gentle product pumping
 Immersion depth: 1000 and 1100 mm
+ Variable flow rate (in conjunction
with speed controller / frequency
converter)
+ Easy handling
+ Quick-action motor coupling
enables the motor and pump tube
to be connected and separated Frequency converter
quickly Enables stageless adjustment of the drive speed
+ Quick to dismantle, easy to clean (0-900 1/min) for liquids such as highly viscous
and sensitive products.
+ Not filled with lubricants,
preventing product contamination

8
 SANITARY

Lutz eccentric screw pump

B70V Sanitary in 3-A version

Lutz B70V sanitary pumps ensure gentle and hygienic pumping of

liquid food and beverages, pharmaceutical substances and cosmetic
products and are certified and approved in accordance with the latest
“3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps
Number 02-10.”

Properties:
 Displacement pump using the eccentric screw principle
 Hygienic design in accordance with the latest 3-A standards
 Low pulsation, even pumping flow
 Practically no abrasive effect on the medium
 Tri-clamp connection according to DIN 32676
 Deadleg-free design, polished surfaces
 Easily accessible and inspectable components
 Optionally available with integrated frequency converter
 Explosion-proof versions approved in accordance with the
ATEX Directive 2014/34/EU Category 1/2
Advantages:
Technical data: + For liquids susceptible to abrasion 02-10

 Stainless steel (1.4571 / 1.4404) and 3-A/FDA or highly viscous liquids

and/or 1935/2004/EC conform plastics (PTFE) + Gentle product pumping EC 1935/2004

and elastomers (50.1) EPDM, FPM

+ Maintains the liquids
 Open or closed (optional) mechanical seal WC/SiC consistency, structure and
in accordance with 3A Sanitary Standard substances contained
 Flow rate: up to 75 l/min + Quick and easy to clean and
 Pumping pressure: up to 10 bar disinfect
 Viscosity: up to flowability limit + Mechanical seal according
 Immersion depth: 1100 mm to 3-A standard
+ Drive via quick-action coupling
Hygienic Design or detachable hand wheel
Only manually detachable, thread-free
connections are used in the areas in contact
with the medium. The low-deadleg design
virtually eliminates microbiological problems
caused by germs and bacteria.

9
 PURE

Lutz flow meter

TS VA10 SS in PURE version

The VA10 SS PURE flow measurement device with touch screen

display and backlighting is very impressive thanks to its simple,
practical display and user-friendly operation, multi-language inter-
face and compact construction. The user guide with instructions
in plain text, system reporting and assistance texts as well as safety
and monitoring functions virtually eliminate the possibility of
errors. It can also be operated manually or by external control.

Properties:
 Operates via nutating disc
 Materials in contact with liquids in food quality
 Touch screen display
EC 1935/2004 Advantages:  Multi-language menu guide
 Instructions in plain text
+ Precise volume detection
of liquid food products and  Integrated assistance function
raw materials  Safety and monitoring functions
+ Practical display and user-friendly  With and without volume preselection
operation  “Plug & Play” module concept
+ User-error protection  Explosion-proof versions approved in accordance with the
+ High measurement precision ATEX Directive 2014/34/EU Category 1/2
thanks to overrun correction
+ Simple calibration Technical data:
+ Easy installation and starting up  Materials: Stainless steel 1.4581, ETFE, PVDF, PTFE, FEP
+ External control / data evaluation or alternatively EPDM
via standard interfaces  Flow rate: 10 to 100 l/min
 Pumping pressure: up to 10 bar
 Viscosity: up to 5000 m Pas

Volume preset
A relay module which can be in-
tegrated into the metering system
automatically shuts off the pump
motor and/or solenoid valve once
the volume preset has been reached.

10
FDA-conform double diaphragm pump
DMP 1/2”-1” made of plastic

In order to ensure a reliable filling process, the hoses, nozzles and curved spouts
meet the requirements of the food and beverage industry.

Other accessories
for food and beverages
In order to ensure a reliable filling process, the hoses, nozzles and curved spouts meet the
requirements of the food and beverage industry.
EC 1935/2004

Certified quality
All materials used have been tested and conform to the required standards.
Our high quality standards are certified by a declaration of conformity.

11
Lutz Drum and Container Pumps
Pump tube SS PURE (stainless steel) for aqueous and fatty foodstuffs

Product detail Pump tube SS-SL SS-MS

Type of impeller L R L R
Category 1 / 2 (acc. to ATEX) no no yes yes
Immersion tube diameter: up to mm 41 41 41 41
Temperature of medium: up to °C 100 100 100 100
Material: Pump tube 1.4571 1.4571 1.4571 1.4571
Impeller PP SS ETFE ETFE
Hose connection: Tri-Clamp DN 32 32 32 32
Length:   700 mm*** G Order No. basic pump 0150-003 0150-000 0151-003 0151-000
Length: 1000 mm*** G Order No. basic pump 0150-004 0150-001 0151-004 0151-001
Length: 1200 mm*** G Order No. basic pump 0150-005 0150-002 0151-005 0151-002

Version: PURE SL G Order No. additional price 0150-350 0150-351 – –

Version: PURE MS FPM G Order No. additional price – – 0151-350 0151-351
Version: PURE MS EPDM G Order No. additional price – – 0151-352 0151-353
Please choose Order-No. basic pump + Order-No. PURE additional price
G 

Choice of motors Operating data

MI 4 MI 4-E Characteristic curve no. 401 400 401 400
- with speed Flow rate* up to l/min. 117 210 117 210
controller Delivery head* up to m wc 19 10 19 10
Output: 500 W 500 W Viscosity** up to mPas 500 350 500 350
Voltage: 230 V 230 V Density**** up to kg/dm³ 1,4 1,1 1,4 1,1
Order No. 0030-000 0030-001 Weight (kg) Motor + pump tube 5,7 5,7 5,7 5,7
MA II 3 Characteristic curve no. 403 402 403 402
Output: 460 W 460 W Flow rate* up to l/min. 95 178 95 178
Voltage: 230 V 230 V Delivery head* up to m wc 14 9 14 9
LVR.: no yes Viscosity** up to mPas 350 200 350 200
Density**** up to kg/dm³ 1,6 1,2 1,6 1,2
Order No. 0060-000 0060-008 Weight (kg) Motor + pump tube 7,5 7,5 7,5 7,5
MA II 5 MA II 5 MA II 5 S Characteristic curve no. 405 404 405 404
Output: 575 W 575 W 575 W Flow rate* up to l/min. 100 190 100 190
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 16 10 16 10
LVR.: no yes no Viscosity** up to mPas 700 550 700 550
acid-proof Density**** up to kg/dm³ 1,8 1,3 1,8 1,3
Order No. 0060-001 0060-009 0060-091 Weight (kg) Motor + pump tube 8,3 8,3 8,3 8,3
MA II 7 Characteristic curve no. 407 406 407 406
Low-voltage release (LVR.): Output: 795 W 795 W Flow rate* up to l/min. 115 210 115 210
Prevents the pump from starting Voltage: 230 V 230 V Delivery head* up to m wc 20 13 20 13
up again without warning after a LVR.: no yes Viscosity** up to mPas 500 400 500 400
power failure. It is recommended
when pumping hazardous Density**** up to kg/dm³ 1,9 1,4 1,9 1,4
liquids. Order No. 0060-002 0060-010 Weight (kg) Motor + pump tube 9,5 9,5 9,5 9,5
B4/GT Characteristic curve no. 411 410 411 410
Output: 750 W 750 W Flow rate* up to l/min. 100 180 100 180
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 12 13 12 13
Protection Viscosity** up to mPas 500 400 500 400
switch: no yes Density**** up to kg/dm³ 2,2 2,0 2,2 2,0
IE3 Order No. 0004+050 0004+052 Weight (kg) Motor + pump tube 14,7 14,7 14,7 14,7
* Determined with water at 20 °C *** Special lengths   **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil   200–2500 mm on request Higher densities possible for shorter operating periods. frequencies on request.

12
 Pump tube SS PURE (stainless steel)
for aqueous and fatty foodstuffs

Materials (coming into contact with the pumped medium):

Version: SL-R SL-L MS-FPM MS-EPDM
Housing: SS (1.4571) SS (1.4571) SS (1.4571) SS (1.4571)
Impeller: SS (1.4571) PP ETFE ETFE
Seals: none none FPM EPDM
Mechanical none none Carbon, Ceramic, Carbon, Ceramic,
seals: PTFE, SS (1.4571), PTFE, SS (1.4571),
HC-4 (2.4610) HC-4 (2.4610)
Bearing: Pure Carbon Pure Carbon Pure Carbon Pure Carbon
Drive shaft: SS (1.4571) SS (1.4571) SS (1.4571) SS (1.4571)
H (m wc)

Type of impeller L

Illustration shows:
Pump tube SS MS PURE
with motor MA II

Utilisable Length (Dimension C -40 mm)

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.
Dimension C
H (m wc)

Type of impeller R
PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
pharmaceutical industry.

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

13
Lutz Drum and Container Pumps
Pump tube SS PURE (stainless steel) for alcoholic, highly inflammable foodstuffs

Product detail Pump tube SS-MS

Type of impeller L R
Category 1 / 2 (acc. to ATEX) yes yes
Immersion tube diameter: up to mm 41 41
Temperature of medium: up to °C 100 100
Material: Pump tube 1.4571 1.4571
Impeller ETFE ETFE
Hose connection: Tri-Clamp DN 32 32
Length: 700 mm*** G Order No. basic pump 0151-003 0151-000
Length: 1000 mm*** G Order No. basic pump 0151-004 0151-001
Length: 1200 mm*** G Order No. basic pump 0151-005 0151-002

Version: PURE FPM G Order No. additional price 0151-350 0151-351

Version: PURE EPDM G Order No. additional price 0151-352 0151-353
Please choose Order-No. basic pump + Order-No. PURE additional price
G

Choice of motors Operating data

ME II 3 Characteristic curve no. 453 452
Output: 460 W 460 W Flow rate* up to l/min. 95 178
Voltage: 230 V 230 V Delivery head* up to m wc 14 9
LVR.: yes no Viscosity** up to mPas 350 200
Density**** up to kg/dm³ 1,6 1,2
Order No. 0050-000 0050-016 Weight (kg) Motor + pump tube 8,7 8,7
ME II 5 Characteristic curve no. 455 454
Output: 580 W 580 W Flow rate* up to l/min. 100 190
Voltage: 230 V 230 V Delivery head* up to m wc 16 10
LVR.: yes no Viscosity** up to mPas 700 550
Density**** up to kg/dm³ 1,8 1,3
Order No. 0050-001 0050-017 Weight (kg) Motor + pump tube 9,6 9,6
ME II 7 Characteristic curve no. 457 456
Output: 795 W 795 W Flow rate* up to l/min. 115 210
Voltage: 230 V 230 V Delivery head* up to m wc 20 13
LVR.: yes no Viscosity** up to mPas 500 400
Density**** up to kg/dm³ 1,9 1,4
Order No. 0050-002 0050-018 Weight (kg) Motor + pump tube 10,8 10,8
Low-voltage release (LVR): ME II 8 Characteristic curve no. 459 458
Prevents the pump from starting
up again without warning after
Output: 930 W 930 W Flow rate* up to l/min. 123 243
a power failure. Compulsory Voltage: 230 V 230 V Delivery head* up to m wc 26 15
for explosive areas, in case no LVR.: yes no Viscosity** up to mPas 750 650
special measures are taken
(e.g. remote control). Density**** up to kg/dm³ 1,9 1,4
Order No. 0050-042 0050-041 Weight (kg) Motor + pump tube 10,8 10,8
* Determined with water at 20 °C *** Special lengths **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil 200–2500 mm on request Higher densities possible for shorter operating periods. frequencies on request.

14
 Pump tube SS PURE (stainless steel)
for alcoholic, highly inflammable foodstuffs

Materials (coming into contact with the pumped medium):

Version: MS-FPM MS-EPDM
Housing: stainless steel (1.4571) stainless steel (1.4571)
Impeller: ETFE ETFE
Seals: FPM EPDM
Mechanical seal: Carbon, Ceramic, PTFE, Carbon, Ceramic, PTFE,
stainless steel, HC-4 (2.4610) stainless steel, HC-4 (2.4610)
Bearing: Pure Carbon Pure Carbon
Drive shaft: stainless steel (1.4571) stainless steel (1.4571)
H (m wc)

Type of impeller L

Illustration shows:
Pump tube SS MS PURE
Ex with motor ME II

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.

Utilisable Length (Dimension C -40 mm)

Dimension C
H (m wc)

Type of impeller R
PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
pharmaceutical industry.

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

15
Lutz Drum and Container Pumps
Pump tube RE-SS PURE (stainless steel) for complete drum drainage of aqueous and fatty foodstuffs

Product detail Pump tube RE-SS-MS

Type of impeller L L
Category 1 / 2 (acc. to ATEX) no yes
Immersion tube diameter: up to mm 41 41
Temperature of medium: up to °C 100 100
Material: Pump tube 1.4571 1.4571
Impeller PP ETFE
Hose connection: Tri-Clamp DN 32 32
Length:   700 mm*** G Order No. basic pump 0151-156 0151-156
Length: 1000 mm*** G Order No. basic pump 0151-157 0151-157
Length: 1200 mm*** G Order No. basic pump 0151-158 0151-158

Version: PURE FPM G Order No. additional price – 0151-360

Version: PURE EPDM G Order No. additional price 0151-361 0151-362
Please choose Order-No. basic pump + Order-No. PURE additional price
G 

Choice of motors Operating data

MI 4 MI 4-E Characteristic curve no. 700
- with speed Flow rate* up to l/min. 78
controller Delivery head* up to m wc 17
Output: 500 W 500 W Viscosity** up to mPas 700
Voltage: 230 V 230 V Density**** up to kg/dm³ 1,4
Order No. 0030-000 0030-001 Weight (kg) Motor + pump tube 6,0

MA II 3 Characteristic curve no. 701

Output: 460 W 460 W Flow rate* up to l/min. 77
Voltage: 230 V 230 V Delivery head* up to m wc 14
LVR.: no yes Viscosity** up to mPas 500
Density**** up to kg/dm³ 1,6
Order No. 0060-000 0060-008 Weight (kg) Motor + pump tube 7,8

MA II 5 MA II 5 MA II 5 S Characteristic curve no. 702

Output: 575 W 575 W 575 W Flow rate* up to l/min. 77
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 14
LVR.: no yes no Viscosity** up to mPas 900
acid-proof Density**** up to kg/dm³ 1,8
Order No. 0060-001 0060-009 0060-091 Weight (kg) Motor + pump tube 8,6

MA II 7 Characteristic curve no. 703

Low-voltage release (LVR.):
Output: 795 W 795 W Flow rate* up to l/min. 70
Prevents the pump from starting Voltage: 230 V 230 V Delivery head* up to m wc 18
up again without warning after a LVR.: no yes Viscosity** up to mPas 700
power failure. It is recommended
when pumping hazardous Density**** up to kg/dm³ 1,9
liquids. Order No. 0060-002 0060-010 Weight (kg) Motor + pump tube 9,8

B4/GT Characteristic curve no. 705

Output: 750 W 750 W Flow rate* up to l/min. 55
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 8,5
Protection Viscosity** up to mPas 600
switch: no yes Density**** up to kg/dm³ 2,2
IE3 Order No. 0004+050 0004+052 Weight (kg) Motor + pump tube 15,0
* Determined with water at 20 °C *** Special lengths   **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil   400–2000 mm on request Higher densities possible for shorter operating periods. frequencies on request.

16
 Pump tube RE-SS PURE (stainless steel)
for complete drum drainage of aqueous and fatty foodstuffs

Materials (coming into contact with the pumped medium):

Version: MS-FPM MS-EPDM
Housing: stainless steel (1.4571) stainless steel (1.4571)
Impeller: ETFE ETFE, optional PP
Sealing pot: ETFE/stainless steel (1.4571) ETFE/stainless steel (1.4571)
Seals: FPM, PTFE EPDM, PTFE
Mechanical seal: Carbon, Ceramic, PTFE, Carbon, Ceramic, PTFE,
HC-4 (2.4610), HC-4 (2.4610),
stainless steel 1.4571) stainless steel 1.4571)
Bearing: Pure Carbon Pure Carbon
Drive shaft: stainless steel (1.4571) stainless steel (1.4571)
H (m wc)

Type of impeller L

Illustration shows:
Pump tube RE SS
PURE with motor MA II

Utilisable Length (Dimension C -40 mm)

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.
Dimension C

PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
pharmaceutical industry.
Complete drum drainage
Nearly completely drained.
Residual quantity < 0.10 litres.

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

17
Lutz Drum and Container Pumps
Pump tube RE-SS PURE (stainless steel) for complete drum drainage of alcoholic, highly inflammable foodstuffs

Product detail Pump tube RE-SS MS

Type of impeller L
Category 1 / 2 (acc. to ATEX) yes
Immersion tube diameter: up to mm 41
Temperature of medium: up to °C 100
Material: Pump tube 1.4571
Impeller ETFE
Hose connection: Tri-Clamp DN 32
Length: 700 mm*** G Order No. basic pump 0151-156
Length: 1000 mm*** G Order No. basic pump 0151-157
Length: 1200 mm*** G Order No. basic pump 0151-158

Version: PURE FPM G Order No. additional price 0151-360

Version: PURE EPDM G Order No. additional price 0151-362
Please choose Order-No. basic pump + Order-No. PURE additional price
G

Choice of motors Operating data

ME II 3 Characteristic curve no. 750
Output: 460 W 460 W Flow rate* up to l/min. 77
Voltage: 230 V 230 V Delivery head* up to m wc 14
LVR.: yes no Viscosity** up to mPas 500
Density**** up to kg/dm³ 1,6
Order No. 0050-000 0050-016 Weight (kg) Motor + pump tube 9,0
ME II 5 Characteristic curve no. 751
Output: 580 W 580 W Flow rate* up to l/min. 77
Voltage: 230 V 230 V Delivery head* up to m wc 14
LVR.: yes no Viscosity** up to mPas 900
Density**** up to kg/dm³ 1,8
Order No. 0050-001 0050-017 Weight (kg) Motor + pump tube 9,9
ME II 7 Characteristic curve no. 752
Output: 795 W 795 W Flow rate* up to l/min. 70
Voltage: 230 V 230 V Delivery head* up to m wc 18
LVR.: yes no Viscosity** up to mPas 700
Density**** up to kg/dm³ 1,9
Order No. 0050-002 0050-018 Weight (kg) Motor + pump tube 11,1
Low-voltage release (LVR): ME II 8 Characteristic curve no. 753
Prevents the pump from starting Output: 930 W 930 W Flow rate* up to l/min. 78
up again without warning after
a power failure. Compulsory Voltage: 230 V 230 V Delivery head* up to m wc 22
for explosive areas, in case no LVR.: yes no Viscosity** up to mPas 950
special measures are taken
(e.g. remote control). Density**** up to kg/dm³ 1,9
Order No. 0050-042 0050-041 Weight (kg) Motor + pump tube 11,1
* Determined with water at 20 °C *** Special lengths **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil 400–2000 mm on request Higher densities possible for shorter operating periods. frequencies on request.

18
 Pump tube RE-SS PURE (stainless steel)
for complete drum drainage of alcoholic, highly inflammable foodstuffs

Materials (coming into contact with the pumped medium):

Version: MS-FPM MS-EPDM
Housing: stainless steel (1.4571) stainless steel (1.4571)
Impeller: ETFE ETFE
Sealing pot: ETFE/stainless steel (1.4571) ETFE/stainless steel (1.4571)
Seals: FPM, PTFE EPDM, PTFE
Mechanical seal: Carbon, Ceramic, PTFE, Carbon, Ceramic, PTFE,
HC-4 (2.4610), HC-4 (2.4610),
stainless steel 1.4571) stainless steel 1.4571)
Bearing: Pure Carbon Pure Carbon
Drive shaft: stainless steel (1.4571) stainless steel (1.4571)
H (m wc)

Type of impeller L

Illustration shows:
Pump tube RE SS PURE
Ex with motor ME II

Utilisable Length (Dimension C -40 mm)

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.
Dimension C

PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
Tip pharmaceutical industry.
The right pump
for "hot applications".

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

19
Lutz Drum and Container Pumps
Pump tube MP-SS PURE (stainless steel) for mixing and pumping of aqueous and fatty foodstuffs

Product detail Pump tube MP-SS-MS

Type of impeller R R
Category 1 / 2 (acc. to ATEX) no yes
Immersion tube diameter: up to mm 41 41
Temperature of medium: up to °C 100 100
Material: Pump tube 1.4571 1.4571
Impeller SS ETFE
Hose connection: Tri-Clamp DN 32 32
Length: 1000 mm*** G Order No. basic pump 0151-240 0151-240
Length: 1225 mm*** G Order No. basic pump 0151-255 0151-255

Version: PURE FPM G Order No. additional price – 0151-355

Version: PURE EPDM G Order No. additional price 0151-356 0151-357
Please choose Order-No. basic pump + Order-No. PURE additional price
G 

Choice of motors Operating data

MI 4 MI 4-E Characteristic curve no. 900
- with speed Flow rate* up to l/min. 210
controller Delivery head* up to m wc 10
Output: 500 W 500 W Viscosity** up to mPas 350
Voltage: 230 V 230 V Density**** up to kg/dm³ 1,1
Order No. 0030-000 0030-001 Weight (kg) Motor + pump tube 6,0

MA II 3 Characteristic curve no. 901

Output: 460 W 460 W Flow rate* up to l/min. 178
Voltage: 230 V 230 V Delivery head* up to m wc 9
LVR.: no yes Viscosity** up to mPas 200
Density**** up to kg/dm³ 1,2
Order No. 0060-000 0060-008 Weight (kg) Motor + pump tube 7,8

MA II 5 MA II 5 MA II 5 S Characteristic curve no. 902

Output: 575 W 575 W 575 W Flow rate* up to l/min. 190
Voltage: 230 V 230 V 230 V Delivery head* up to m wc 10
LVR.: no yes no Viscosity** up to mPas 550
acid-proof Density**** up to kg/dm³ 1,3
Order No. 0060-001 0060-009 0060-091 Weight (kg) Motor + pump tube 8,6

MA II 7 Characteristic curve no. 903

Low-voltage release (LVR.):
Output: 795 W 795 W Flow rate* up to l/min. 210
Prevents the pump from starting Voltage: 230 V 230 V Delivery head* up to m wc 13
up again without warning after a LVR.: no yes Viscosity** up to mPas 400
power failure. It is recommended
when pumping hazardous Density**** up to kg/dm³ 1,4
liquids. Order No. 0060-002 0060-010 Weight (kg) Motor + pump tube 9,8

B4/GT Characteristic curve no. 905

Output: 750 W 750 W Flow rate* up to l/min. 140
Voltage: 230/400 V 230/400 V Delivery head* up to m wc 10,5
Protection Viscosity** up to mPas 400
switch: no yes Density**** up to kg/dm³ 2,0
IE3 Order No. 0004+050 0004+052 Weight (kg) Motor + pump tube 15,0
* Determined with water at 20 °C *** Special lengths   **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil   600–2500 mm on request Higher densities possible for shorter operating periods. frequencies on request.

20
 Pump tube MP-SS PURE (stainless steel)
for mixing and pumping of aqueous and fatty foodstuffs

Materials (coming into contact with the pumped medium):

Version: MS-FPM MS-EPDM
Housing: stainless steel (1.4571) stainless steel (1.4571)
Impeller: ETFE ETFE optional SS
Seals: FPM, PTFE EPDM, PTFE
Mechanical seal: Carbon, Ceramic, PTFE, Carbon, Ceramic, PTFE,
HC-4 (2.4610), HC-4 (2.4610),
stainless steel 1.4571) stainless steel 1.4571)

Bearing: Pure Carbon Pure Carbon

Drive shaft: stainless steel (1.4571) stainless steel (1.4571)
H (m wc)

Type of impeller R

Illustration shows:
Pump tube MP SS
PURE with motor MA II

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.

Utilisable Length (Dimension C -40 mm)

Dimension C

PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
pharmaceutical industry.
Tip
Which pump for which liquid?
See resistance table

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

21
Lutz Drum and Container Pumps
Pump tube MP-SS PURE (stainless steel) for mixing and pumping of alcoholic, highly inflammable foodstuffs

Product detail Pump tube MP-SS MS

Type of impeller R
Category 1 / 2 (acc. to ATEX) yes
Immersion tube diameter: up to mm 41
Temperature of medium: up to °C 100
Material: Pump tube 1.4571
Impeller ETFE
Hose connection: Tri-Clamp DN 32
Length: 1000 mm*** G Order No. basic pump 0151-240
Length: 1225 mm*** G Order No. basic pump 0151-255

Version: PURE FPM G Order No. additional price 0151-355

Version: PURE EPDM G Order No. additional price 0151-357
Please choose Order-No. basic pump + Order-No. PURE additional price
G

Choice of motors Operating data

ME II 3 Characteristic curve no. 950
Output: 460 W 460 W Flow rate* up to l/min. 178
Voltage: 230 V 230 V Delivery head* up to m wc 9
LVR.: yes no Viscosity** up to mPas 200
Density**** up to kg/dm³ 1,2
Order No. 0050-000 0050-016 Weight (kg) Motor + pump tube 9,0
ME II 5 Characteristic curve no. 951
Output: 580 W 580 W Flow rate* up to l/min. 190
Voltage: 230 V 230 V Delivery head* up to m wc 10
LVR.: yes no Viscosity** up to mPas 550
Density**** up to kg/dm³ 1,3
Order No. 0050-001 0050-017 Weight (kg) Motor + pump tube 9,9
ME II 7 Characteristic curve no. 952
Output: 795 W 795 W Flow rate* up to l/min. 210
Voltage: 230 V 230 V Delivery head* up to m wc 13
LVR.: yes no Viscosity** up to mPas 400
Density**** up to kg/dm³ 1,4
Order No. 0050-002 0050-018 Weight (kg) Motor + pump tube 11,1
Low-voltage release (LVR): ME II 8 Characteristic curve no. 953
Prevents the pump from starting Output: 930 W 930 W Flow rate* up to l/min. 216
up again without warning after
a power failure. Compulsory Voltage: 230 V 230 V Delivery head* up to m wc 14,5
for explosive areas, in case no LVR.: yes no Viscosity** up to mPas 650
special measures are taken
(e.g. remote control). Density**** up to kg/dm³ 1,4
Order No. 0050-042 0050-041 Weight (kg) Motor + pump tube 11,1
* Determined with water at 20 °C *** Special lengths **** Determined with 3 m hose 3/4“ and open nozzle 3/4“. Special voltages and
** Determined with oil 600–2500 mm on request Higher densities possible for shorter operating periods. frequencies on request.

22
 Pump tube MP-SS PURE (stainless steel)
for mixing and pumping of alcoholic, highly inflammable foodstuffs

Materials (coming into contact with the pumped medium):

Version: MS-FPM MS-EPDM
Housing: stainless steel (1.4571) stainless steel (1.4571)
Impeller: ETFE ETFE
Seals: FPM, PTFE EPDM, PTFE
Mechanical seal: Carbon, Ceramic, PTFE, Carbon, Ceramic, PTFE,
HC-4 (2.4610), HC-4 (2.4610),
stainless steel 1.4571) stainless steel 1.4571)

Bearing: Pure Carbon Pure Carbon

Drive shaft: stainless steel (1.4571) stainless steel (1.4571)
H (m wc)

Type of impeller R

Illustration shows:
Pump tube MP SS PURE
Ex with motor ME II

Measured values (± 10%) determined with water at 20 °C and drive motors 230 V.

Utilisable Length (Dimension C -40 mm)

Dimension C

PURE

EC 1935/2004

Pump tube also available in

PURE version with Tri-Clamp
connection. All materials coming
into contact with the pumped
medium are physiologically safe.
The pump tubes are mainly used
in the food-, cosmetics- and
pharmaceutical industry.

Please remember that the flow rate is reduced as the Viscosity increases. The
Density of the pumped liquid similarly affects the flow rate, though to a lesser
extent.

23
Lutz Eccentric Screw Pumps
Lutz HD-E PURE for medium viscous foodstuffs

The intelligent solution

for the pumping of medium
viscosity liquids
High efficiency, handy, low weight and easily
disassembled for easy cleaning make the Lutz
HD-E a practical drum pump system especially
for medium viscosity liquids.
It is suitable for pumping acids and basic liquids,
oils, used oil, waste disposal liquids, colours,
foodstuffs, cosmetics and creams.

Light and compact

Simple and easily dismantled

Easy to clean

Suitable for continuous operation

Practical Lutz hand wheel for motor

separation and to carry

Smooth flow

For thin and thick liquids

Constant volumetric flow

Product detail Pump tube HD-E PURE

Category 1 / 2 (acc. to ATEX) no
Immersion tube diameter: max. mm 41
Temperature of medium: max. °C 100
Material: Pump tube Stainless steel (1.4571)
Stator PTFE
Hose connection: Tri-Clamp DN 32
Length: 1000 mm G * Order-No. basic pump 0155-010

Version PURE FPM G Order-No. additional price 0155-016

Version PURE EPDM G Order-No. additional price 0155-017
Please choose Order-No. basic pump + Order-No. PURE additional price
G 

Choice of motors Operating data

Single phase motor
Output: 0,55 kW Delivery rate up to l/min. 20
Voltage: 230 V Delivery head up to bar 4
Speed: 1500 1/min. Viscosity mPas 500-4000
Protection class: IP 54 Weight (kg) Motor + pump tube 11,5
Order-No. 0155-032

* Special lengths 600–1500 mm on request

24
 HD-E PURE
for viscosities from 500 to 4000 mPas

Materials (coming into contact with the pumped medium)

Version: HD-E PURE FPM HD-E PURE EPDM
Pump tube: Stainless steel (1.4571) Stainless steel (1.4571)
Stator: PTFE PTFE
Mechanical seal: Stainless steel/Carbon/FPM Stainless steel/Carbon/EPDM

Secondary seal: FPM EPDM

Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)

Pump tube in PURE version also available with

PURE Tri-Clamp-connection. All materials coming into contact
with the pumped medium are physiologically safe. The pump
tubes are mainly used in the food-, cosmetics- and
pharmaceutical industry.

 Bearing head with mechanical seal

 Compact unit for bearing and bearing shaft
 Wide range of mechanical seals

 Easy detachable pump tube

 Easy cleaning
 No tools for disassembling of pump

Utilisable Length (Dimension C -40 mm)

Dimension C

 Free running drive shaft

 Easy to clean

 Delivery element eccentric

 Smooth pumping of liquids
 High pressure
 Constant volumetric flow

25
Lutz Eccentric Screw Pumps
B70V-SR 12.1, 25.1 and 50.1 PURE for viscous foodstuffs

Product detail Pump tubes B70V-SR PURE

Size 12.1 12.1 25.1 25.1 50.1 50.1
Category 1 / 2 (acc. to ATEX) no yes no yes no yes
Seal Packing gland (St) MS MS MS MS MS MS
Mechanical seal (MS)
Drive shaft Torsion shaft (TS) TS UJ TS UJ TS UJ
Universal joint shaft (UJ)
Delivery rate* up to l/min. 12 12 25 25 50 50
Delivery head* up to bar 6 6 6 6 6 6
Temp. of medium** max. °C 140 140 140 140 140 140
Material pump tube 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404
Material stator PTFE PTFE PTFE PTFE PTFE PTFE
Immersion tube diameter mm 54 54 54 54 54 54
Pressure joint Tri-Clamp DN 50 50 50 50 50 50
Weight kg 7 7 7 7 7 7
Length*** mm 1000 1000 1000 1000 1100 1100
Order-No. basic pump G 0174-014 0174-024 0174-134 0174-144 0174-514 0174-524
  

Order-No. additional price PURE FPM G 0172-128 0173-138 0172-128 0173-138 0172-128 0173-138
  
Order-No. additional price PURE EPDM G 0172-129 0173-139 0172-129 0173-139 0172-129 0173-139
  
Please choose Order-No. basic pump + Order-No. PURE additional price
G

* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)
*** Special length 500 - 2000 mm on request (version with joint shaft only)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Universal motors non-ex. proof MI 4 MI 4-E MA II 3 MA II 5 MA II 7
Type 500 W, 230 V 500 W, 230 V 460 W, 230 V 575 W, 230 V 795 W, 230 V
Protection class/Weight IP 24 2,8 kg IP 24 2,8 kg IP 54 4,6 kg IP 54 5,4 kg IP 54 6,6 kg
ohne Drehzahlst. mit Drehzahlst.
Order-No. (without low-voltage release) 0030-000 0030-001 0060-000 0060-001 0060-002
Order-No. (with low-voltage release) – – 0060-008 0060-009 0060-010

Universal motors ex. proof ME II 3 ME II 5 ME II 7 ME II 8

Type 460 W, 230 V 580 W, 230 V 795 W, 230 V 930 W, 230 V
Protection class/Weight IP 54 5,5 kg IP 54 6,3 kg IP 54 7,5 kg IP 54 8 kg
Order-No. (with low-voltage release) 0050-000 0050-001 0050-002 0050-042
Order-No. (without low-voltage release) 0050-016 0050-017 0050-018 0050-041

26
 B70V-SR 12.1, 25.1 and 50.1 PURE
for viscosities from 1 - 30,000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V-SR PURE B70V-SR PURE
PTFE/FPM PTFE/EPDM
Housing: Stainless steel Stainless steel
(1.4571/1.4404) (1.4571/1.4404)
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM EPDM
Mechanical seal:
Torsion shaft WC/SiC/FPM WC/SiC/EPDM
Universal joint shaft WC/WC/FPM WC/WC/EPDM
Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)
Stator material: PTFE PTFE

Pump tube with PTFE stator, also available in PURE version

PURE
with Tri-Clamp-connection. The pump tubes are mainly used in the
food-, cosmetics- and pharmaceutical industry.

Wichtige
ImportantInfo!Information!
When pumping in „Zone O“ areas or pumping flammable liquids
only pumps with mechanical seal, universal joint shaft and PTFE
stator are approved.
Viscosity range from aqueous to fluidity range.
Medium table with liquid examples see chemical resistance table.

Utilisable Length (Dimension C -60 mm)

Dimension C

27
Lutz Eccentric Screw Pumps
B70V 12.1 and 25.1 PURE for viscous foodstuffs

Product detail Pump tubes B70V PURE

Size 12.1 12.1 25.1 25.1
Category 1 / 2 (acc. to ATEX) no yes no yes
Seal Mechanical seal (MS) MS MS MS MS
Drive shaft Torsion shaft (TS) TS UJ TS UJ
Universal joint shaft (UJ)
Delivery rate* up to l/min. 12 12 25 25
Delivery head* up to bar 6 6 6 6
Temp. of medium** max. °C 140 140 140 140
Material pump tube 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404
Material stator PTFE PTFE PTFE PTFE
Immersion tube diameter mm 54 54 54 54
Pressure joint Tri-Clamp DN 50 50 50 50
Weight kg 7 7 7 7
Length*** mm 1000 1000 1000 1000
Order-No. basic pump G
0172-004 0173-014 0172-124 0173-134
 

Order-No. additional price PURE FPM G 0172-128 0173-138 0172-128 0173-138

 
Order-No. additional price PURE EPDM G 0172-129 0173-139 0172-129 0173-139
 
Please choose Order-No. basic pump + Order-No. PURE additional price
G

* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)
*** Special length 500 - 2000 mm on request (version with joint shaft only)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Motors with cable terminal box For B70V - 12.1 For B70V - 25.1
Type 0,37 kW, 700 1/min. 0,55 kW, 900 1/min. 0,55 kW, 700 1/min. 0,75 kW, 900 1/min.
Protection class/Weight IP 55 16,5 kg IP 55 12 kg IP 55 16,5 kg IP 55 21,7 kg
Order-No. 0172+803 0172+806 0172+809 0172-901

Motors with protection switch For B70V - 12.1 For B70V - 25.1
Type 0,37 kW, 700 1/min. 0,55 kW, 900 1/min. 0,55 kW, 700 1/min. 0,75 kW, 900 1/min.
Protection class/Weight IP 54 16,5 kg IP 54 12 kg IP 54 16,5 kg IP 54 21,7 kg
Order-No. 0172+802 0172+805 0172+808 0172-900

Three-phase motor Motors, explosion proof For B70V - 12.1 For B70V - 25.1
230/400 V, 50 Hz,
Type 0,37 kW, 700 1/min. 0,55 kW, 900 1/min. 0,55 kW, 700 1/min. 0,65 kW, 900 1/min.
Energy efficiency class
IE 3 in accordance Protection class II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3
with EU regulations Protection class/Weight IP 54 16,4 kg IP 54 17,2 kg IP 54 18 kg IP 54 15,3 kg
640/2009 and 04/2014 Order-No. 0172-801 0172-804 0172-807 0172-810
Special voltages,
frequencies, protection Motors with frequency converter For B70V - 12.1 For B70V - 25.1
classes as well as higher
explosion proof protec- Type 0,55 kW, 0-900 1/min. 0,55 kW, 0-900 1/min. 0,75 kW, 0-900 1/min.
tion classes on request. Protection class/Weight IP 54 15,6 kg IP 54 15,6 kg IP 54 21,7 kg
Order-No. 0172-769 0172-769 0172-768

28
 B70V 12.1 and 25.1 PURE
for viscosities from 1 - 100,000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V PURE B70V PURE
PTFE/FPM PTFE/EPDM
Housing: Stainless steel Stainless steel
(1.4571/1.4404) (1.4571/1.4404)
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM EPDM
Mechanical seal:
Torsion shaft WC/SiC/FPM WC/SiC/EPDM
Universal joint shaft WC/WC/FPM WC/WC/EPDM
Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)
Stator material: PTFE PTFE

Pump tube with PTFE stator, also available in PURE version

PURE
with Tri-Clamp-connection. The pump tubes are mainly used in the
food-, cosmetics- and pharmaceutical industry.

Wichtige
ImportantInfo!Information!
When pumping in „Zone O“ areas or pumping flammable liquids
only pumps with mechanical seal, universal joint shaft and PTFE
stator are approved.
Viscosity range from aqueous to fluidity range.
Medium table with liquid examples see chemical resistance table.

Utilisable Length (Dimension C -60 mm)

Dimension C

29
Lutz Eccentric Screw Pumps
B70V 25.2 PURE for viscous foodstuffs

Product detail Pump tubes B70V PURE

Size 25.2 25.2
Category 1 / 2 (acc. to ATEX) no yes
Seal Packing gland (St) MS MS
Mechanical seal (MS)
Drive shaft Torsion shaft (TS) TS UJ
Universal joint shaft (UJ)
Delivery rate* up to l/min. 25 25
Delivery head* up to bar 10 10
Temp. of medium** max. °C 140 140
Material pump tube 1.4571/1.4404 1.4571/1.4404
Material stator PTFE PTFE
Immersion tube diameter mm 54 54
Pressure joint Tri-Clamp DN 50 50
Weight kg 7 7
Length*** mm 1100 1100
Order-No. basic pump G 0172-254 0173-264


Order-No. additional price PURE FPM G 0172-128 0173-138


Order-No. additional price PURE EPDM G 0172-129 0173-139

Please choose Order-No. basic pump + Order-No. PURE additional price
G

* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)
*** Special length 500 - 2000 mm on request (version with joint shaft only)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Motors with cable terminal box For B70V - 25.2
Type 0,75 kW, 700 1/min. 1,1 kW, 900 1/min.
Protection class/Weight IP 55 17,8 kg IP 55 30,7 kg
Order-No. 0172+815 0172-903

Motors with protection switch For B70V - 25.2

Type 0,75 kW, 700 1/min. 1,1 kW, 900 1/min.
Protection class/Weight IP 54 17,8 kg IP 54 30,7 kg
Order-No. 0172+814 0172-902

Three-phase motor Motors, explosion proof For B70V - 25.2

230/400 V, 50 Hz,
Type 0,65 kW, 700 1/min. 1,0 kW, 900 1/min.
Energy efficiency class
Protection class II 2 G Ex e II T3 II 2 G Ex e II T3
IE 3 in accordance
with EU regulations Protection class/Weight IP 54 20 kg IP 54 20 kg
640/2009 and 04/2014 Order-No. 0172-813 0172-816
Special voltages,
frequencies, protection Motors with frequency converter For B70V - 25.2
classes as well as higher Type 1,1 kW, 0-900 1/min.
explosion proof protec-
Protection class/Weight IP 54 25,5 kg
tion classes on request.
Order-No. 0172-767

30
 B70V 25.2 PURE
for viscosities from 1 - 100,000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V PURE B70V PURE
PTFE/FPM PTFE/EPDM
Housing: Stainless steel Stainless steel
(1.4571/1.4404) (1.4571/1.4404)
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM FPM or EPDM
Mechanical seal:
Torsion shaft WC/SiC/FPM WC/SiC/EPDM
Universal joint shaft WC/WC/FPM WC/WC/EPDM
Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)
Stator material: PTFE PTFE

Pump tube with PTFE stator, also available in PURE version

PURE
with Tri-Clamp-connection. The pump tubes are mainly used in the
food-, cosmetics- and pharmaceutical industry.

Wichtige
ImportantInfo!Information!
When pumping in „Zone O“ areas or pumping flammable liquids
only pumps with mechanical seal, universal joint shaft and PTFE
stator are approved.
Viscosity range from aqueous to fluidity range.
Medium table with liquid examples see chemical resistance table.

Utilisable Length (Dimension C -60 mm)

Dimension C

31
Lutz Eccentric Screw Pumps
B70V 50.1 and 75.1 PURE for viscous foodstuffs

Product detail Pump tubes B70V PURE

Size 50.1 50.1 75.1
Category 1 / 2 (acc. to ATEX) no yes no
Seal Packing gland (St) MS MS MS
Mechanical seal (MS)
Drive shaft Torsion shaft (TS) TS UJ UJ
Universal joint shaft (UJ)
Delivery rate* up to l/min. 50 50 75
Delivery head* up to bar 6 6 6
Temp. of medium** max. °C 140 140 140
Material pump tube 1.4571/1.4404 1.4571/1.4404 1.4571/1.4404
Material stator PTFE PTFE PTFE
Immersion tube diameter mm 54 54 54
Pressure joint Tri-Clamp DN 50 50 50
Weight kg 7 7 7
Length*** mm 1100 1100 1100
Order-No. basic pump G 0172-504 0173-514 0173-564

Order-No. additional price PURE FPM G 0172-128 0173-138 0173-140

Order-No. additional price PURE EPDM G 0172-129 0173-139 0173-141

Please choose Order-No. basic pump + Order-No. PURE additional price
G

* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)
*** Special length 500 - 2000 mm on request (version with joint shaft only)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Motors with cable terminal box For B70V - 50.1
Type 1,1 kW, 700 1/min. 1,1 kW, 900 1/min.
Protection class/Weight IP 55 21,7 kg IP 55 30,7 kg
Order-No. 0172+826 0172-903

Motors with cable terminal box For B70V - 75.1

Type 1,1 kW, 700 1/min. 1,5 kW, 700 1/min. 1,5 kW, 900 1/min.
Protection class/Weight IP 55 21,7 kg IP 55 33 kg IP 55 33 kg
Order-No. 0172-761 0172-905

Motors with protection switch For B70V - 50.1

Three-phase motor Type 1,1 kW, 700 1/min. 1,1 kW, 900 1/min.
230/400 V, 50 Hz, Protection class/Weight IP 54 21,7 kg IP 54 30,7 kg
Energy efficiency class Order-No. 0172+825 0172-902
IE 3 in accordance
with EU regulations Motors with protection switch For B70V - 75.1
640/2009 and 04/2014 Type 1,1 kW, 700 1/min. 1,5 kW, 700 1/min. 1,5 kW, 900 1/min.
Special voltages, Protection class/Weight IP 54 21,7 kg IP 54 33 kg IP 54 33 kg
frequencies, protection Order-No. 0172+825 0172-760 0172-904
classes as well as higher
explosion proof protec- Motors, explosion proof For B70V - 50.1
tion classes on request.
Type 0,65 kW, 700 1/min. 1,0 kW, 900 1/min.
Protection class II 2 G Ex e II T3 II 2 G Ex e II T3
Protection class/Weight IP 54 20 kg IP 54 20 kg
Order-No. 0172-813 0172-816

Motors with frequency converter For B70V - 50.1 For B70V - 75.1
Version 1,1 kW, 0-900 1/min. 1,5 kW, 0-900 1/min.
Protection class/Weight IP 54 25,5 kg IP 54 36,2 kg
Order-No. 0172-767 0172-766

32
 B70V 50.1 and 75.1 PURE
for viscosities from 1 - 100,000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V PURE B70V PURE
PTFE/FPM PTFE/EPDM
Housing: Stainless steel Stainless steel
(1.4571/1.4404) (1.4571/1.4404)
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM EPDM
Mechanical seal:
Torsion shaft WC/SiC/FPM WC/SiC/EPDM
Universal joint shaft WC/WC/FPM WC/WC/EPDM
Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)
Stator material: PTFE PTFE

Pump tube with PTFE stator, also available in PURE version

PURE
with Tri-Clamp-connection. The pump tubes are mainly used in the
food-, cosmetics- and pharmaceutical industry.

Wichtige
ImportantInfo!Information!
When pumping in „Zone O“ areas or pumping flammable liquids
only pumps with mechanical seal, universal joint shaft and PTFE
stator are approved.
Viscosity range from aqueous to fluidity range.
Medium table with liquid examples see chemical resistance table.

Utilisable Length (Dimension C -60 mm)

Dimension C

75.1

33
Lutz Eccentric Screw Pumps
B70V 120.1 PURE for viscous and pasty foodstuffs

Product detail Pump tubes B70V PURE

Size 120.1
Category 1 / 2 (acc. to ATEX) no
Seal Mechanical seal (MS) MS
Drive shaft Universal joint shaft (UJ) UJ
Delivery rate* up to l/min. 120
Delivery head* up to bar 6
Temp. of medium max. °C 140
Material pump tube 1.4571
Material stator PTFE
Pumpendurchmesser** max. mm 131
Pressure joint Tri Clamp DN 50
Weight kg 21
Length*** mm 1100
Order-No. basic pump G 0175-204

Order-No. additional price PURE FPM G 0175-208

Order-No. additional price PURE EPDM G 0175-209
Please choose Order-No. basic pump + Order-No. PURE additional price
G

* Determined with water at 20 °C, three-phase motor (600 bzw. 700 1/min.) and elastomer stator
** required bunghole x 133 mm
*** Special length 500 - 2000 mm on request

Choice of motors
Motors with cable terminal box For B70V - 120.1
Type 2,2 kW, 600 1/min. 3,0 kW, 600 1/min.
Protection class/Weight IP 55 42 kg IP 55 46 kg
Order-No. 0175-802 0175-803

Motors with frequency converter For B70V - 120.1

Version 3,0 kW, 0-600 1/min.
Protection class/Weight IP 54 44 kg
Order-No. 0175+802

Three-phase motors 230/400 V, 50 Hz,

Energy efficiency class IE 3 in accordance with EU regulations 640/2009 and 04/2014
Special voltages, frequencies, protection class on request.

34
 B70V 120.1 PURE
for viscosities from 1 - 120.000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V PURE B70V PURE
PTFE/FPM PTFE/EPDM
Housing: Stainless steel (1.4571) Stainless steel (1.4571)
Rotor: Stainless steel (1.4571) Stainless steel (1.4571)
Seals: FPM EPDM

Mechanical seal:* WC/WC, FPM WC/WC, EPDM

Drive shaft: Stainless steel (1.4571) Stainless steel (1.4571)

Stator material: PTFE PTFE
* Mechanical seal pairing on request.

PURE Pump tube with PTFE stator, also available in PURE version
with Tri-Clamp-connection. The pump tubes are mainly used in the
food-, cosmetics- and pharmaceutical industry.

Range 1:
Thin-bodied and lubricating fluids
such as wine, milk, oils etc.
 < 7000 mPas

Range 2:
Abrasive and viscous fluids such
as pulps, adhesives, paints, inks, etc.
 < 20,000 mPas

Range 3:
Very abrasive and highly viscous fluids
such as honey, greases, syrups, etc.
 > 20,000 mPas

Viscosity range:
Up to limit of flowabilty
Utilisable Length (Dimension C -100 mm)
Dimension C

35
Lutz Eccentric Screw Pumps
B70V-H-SR Sanitary 12.1, 25.1 and 50.1 for viscous foodstuffs, pharmaceutical and cosmetic products

Product detail Pump tubes B70V-H-SR Sanitary

Size 12.1 25.1 50.1
Seal Mechanical seal (MS) MS MS MS
Delivery rate* up to l/min. 12 25 50
Delivery head* up to bar 6 6 8
Temp. of medium** max. °C 100 100 100
Material pump tube 1.4404 1.4404 1.4404
Immersion tube diameter mm 54 54 54
Pressure joint Tri-Clamp DN 50 DN 50 DN 50

Weight kg 7 7 7

Length mm 1100 1100 1100

Stator EPDM
Order-No. – – 0174-516
Seal EPDM
Stator PTFE Order-No. 0174-017 0174-137 0174-517
Seal EPDM   
Stator PTFE Order-No. 0174-018 0174-138 0174-518
Seal FPM   
* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Universal motors non-ex. proof MI 4 MI 4-E MA II 3 MA II 5 MA II 7
Type 500 W, 230 V 500 W, 230 V 460 W, 230 V 575 W, 230 V 795 W, 230 V
Protection class/Weight IP 24 2,8 kg IP 24 2,8 kg IP 54 4,6 kg IP 54 5,4 kg IP 54 6,6 kg
– with speed contr.
Order-No. (without low-voltage release) 0030-000 0030-001 0060-000 0060-001 0060-002
Order-No. (with low-voltage release) – – 0060-008 0060-009 0060-010

Universal motors ex. proof ME II 3 ME II 5 ME II 7 ME II 8

Type 460 W, 230 V 580 W, 230 V 795 W, 230 V 930 W, 230 V
Protection class/Weight IP 54 5,5 kg IP 54 6,3 kg IP 54 7,5 kg IP 54 8 kg
Order-No. (with low-voltage release) 0050-000 0050-001 0050-002 0050-042
Order-No. (without low-voltage release) 0050-016 0050-017 0050-018 0050-041

36
 B70V-H-SR Sanitary 12.1, 25.1 and 50.1
for viscosities up to 30,000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V-H-SR Sanitary
12.1/25.1/50.1
Housing: Stainless steel (1.4404)

Rotor: Stainless steel (1.4571)

Seals: EPDM, FPM

Mechanical seal: SiC/Carbon/EPDM (FPM),
optional SiC/SiC/EPDM (FPM)
Drive shaft: Stainless steel (1.4571)

Stator material: PTFE, EPDM (Size 50.1)

Utilisable Length (Dimension C -70 mm)

Dimension C

02-10

EC 1935/2004

37
Lutz Eccentric Screw Pumps
B70V-H-D Sanitary 12.1, 25.1 for viscous foodstuffs, pharmaceutical and cosmetic products

Product detail Pump tubes B70V-H-D Sanitary

Size 12.1 25.1
Seal Mechanical seal (MS) MS MS
Delivery rate* up to l/min. 12 25
Delivery head* up to bar 6 8
Temp. of medium** max. °C 100 100
Material pump tube 1.4404 1.4404
Immersion tube diameter mm 54 54
Pressure joint Tri-Clamp DN 50 DN 50
Weight kg 7 7
Length mm 1100 1100
Stator PTFE Order-No. 0172-007 0172-127
Seal EPDM  
Stator PTFE Order-No. 0172-020 0172-140
Seal FPM  
* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Motors with protection switch For B70V-H-D Sanitary - 12.1 For B70V-H-D Sanitary - 25.1
Version 0,55 kW, 700 1/min. 0,55 kW, 900 1/min. 0,55 kW, 700 1/min. 0,75 kW, 900 1/min.
Protection class/Weight IP 54 16,5 kg IP 54 12 kg IP 54 16,5 kg IP 55 21,7 kg
Order-No. 0172+808 0172+805 0172+808 0172-900

Motors, explosion proof For B70V-H-D Sanitary - 12.1 For B70V-H-D Sanitary - 25.1
Type 0,37 kW, 700 1/min. 0,55 kW, 900 1/min. 0,55 kW, 700 1/min. 0,65 kW, 900 1/min.
Protection class II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3
Protection class/Weight IP 54 16,4 kg IP 54 17,2 kg IP 54 18 kg IP 54 15,3 kg
Order-No. 0172-801 0172-804 0172-807 0172-810
Three-phase motor
230/400 V, 50 Hz, Motors with frequency converter For B70V-H-D Sanitary - 12.1 For B70V-H-D Sanitary - 25.1
RAL 9005, Version 0,55 kW, 0-900 1/min. 0,55 kW, 0-900 1/min. 0,75 kW, 0-900 1/min.
Energy efficiency class Protection class/Weight IP 54 15,6 kg IP 54 15,6 kg IP 54 21,7 kg
IE 3 in accordance
with EU regulations Order-No. 0172-769 0172-769 0172-768
640/2009 and 04/2014.
Special voltages,
frequencies, protection
classes on request.

38
 B70V-H-D Sanitary 12.1, 25.1
for viscosities up to 100.000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V-H-D Sanitary 12.1/25.1
Housing: Stainless steel (1.4404)

Rotor: Stainless steel (1.4571)

Seals: EPDM, FPM

Mechanical seal: SiC/Carbon/EPDM (FPM),

optional SiC/SiC/EPDM (FPM)
Drive shaft: Stainless steel (1.4571)

Stator material: PTFE

Equipped with mounting strap and motor quick coupling as standard.

Utilisable Length (Dimension C -70 mm)
Dimension C

02-10

EC 1935/2004

39
Lutz Eccentric Screw Pumps
B70V-H-D Sanitary 25.2, 50.1, 75.1 for viscous foodstuffs, pharmaceutical and cosmetic products

Product detail Pump tubes B70V-H-D Sanitary

Size 25.2 50.1 75.1
Seal Mechanical seal (MS) MS MS MS
Delivery rate* up to l/min. 25 50 75
Delivery head* up to bar 10 8 6
Temp. of medium** max. °C 100 100 100
Material pump tube 1.4404 1.4404 1.4404
Immersion tube diameter mm 54 54 54
Pressure joint Tri-Clamp DN 50 DN 50 DN 50

Weight kg 7 7 7

Length mm 1100 1100 1100

Stator EPDM
Order-No. – 0172-506 –
Seal EPDM
Stator PTFE Order-No. 0172-257 0172-507 0172-557
Seal EPDM   
Stator PTFE Order-No. 0172-270 0172-520 0172-570
Seal FPM   
* Determined with water at 20 °C, three-phase motor (900 rpm) and elastomer stator
** with PTFE Stator (the medium temperature of explosion proof eccentric screw pumps B70 may not exceed 100°C)

 Explosion proof eccentric screw pump approved category 1 / 2 (acc. to ATEX)

for pumping inflammable liquids of the explosion group IIA and temperature class T4

Choice of motors
Motors with protection switch For B70V-H-D Sanitary - 25.2 For B70V-H-D Sanitary - 50.1
Version 0,75 kW, 700 1/min. 1,1 kW, 900 1/min.
Protection class/Weight IP 54 17,8 kg IP 54 30,7 kg
Order-No. 0172+814 0172-902

For B70V-H-D For B70V-H-D For B70V-H-D

Motors, explosion proof
Sanitary - 25.2 Sanitary - 50.1 Sanitary - 25.2, 50.1, 75.1
Version 0,65 kW, 700 1/min. 1,0 kW, 900 1/min. 1,3 kW, 900 1/min. 1,9 kW, 900 1/min.
Protection class II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3 II 2 G Ex e II T3
Protection class/Weight IP 54 20 kg IP 54 20 kg IP 54 39 kg IP 54 51 kg
Order-No. 0172-813 0172-816 0172-856 0172-857

Three-phase motor Motors with frequency converter For B70V-H-D Sanitary - 25.2 For B70V-H-D Sanitary - 50.1
230/400 V, 50 Hz, Version 0,75 kW, 0-900 1/min. 1,1 kW, 0-900 1/min. 1,1 kW, 0-900 1/min.
RAL 9005, Protection class/Weight IP 54 21,7 kg IP 54 25,5 kg IP 54 25,5 kg
Energy efficiency class Order-No. 0172-768 0172-767 0172-767
IE 3 in accordance
with EU regulations
Motors with cable terminal box For B70V-H-D Sanitary - 75.1
640/2009 and 04/2014
Version 1,5 kW, 700 1/min. 1,5 kW, 900 1/min.
Special voltages,
Protection class/Weight IP 55 33 kg IP 55 33 kg
frequencies, protection
classes on request. Order-No. 0172-761 0172-905

Motors with protection switch For B70V-H-D Sanitary - 75.1

Version 1,5 kW, 700 1/min. 1,5 kW, 900 1/min.
Protection class/Weight IP 54 33 kg IP 54 33 kg
Order-No. 0172-760 0172-904

Motors with frequency converter For B70V-H-D Sanitary - 75.1

Version 1,5 kW, 0-900 1/min.
Protection class/Weight IP 54 36,2 kg
Order-No. 0172-766

40
 B70V-H-D Sanitary 25.2, 50.1, 75.1
for viscosities up to 100.000 mPas

Materials (coming into contact with the pumped medium):

Version: B70V-H-D Sanitary 25.2/50.1/75.1
Housing: Stainless steel (1.4404)

Rotor: Stainless steel (1.4571)

Seals: EPDM, FPM

Mechanical seal: SiC/Carbon/EPDM (FPM),
optional SiC/SiC/EPDM (FPM)

Drive shaft: Stainless steel (1.4571)

Stator material: PTFE, EPDM (Size 50.1)

Equipped with mounting strap and motor quick coupling as standard.

Utilisable Length (Dimension C -70 mm)
Dimension C

75.1
02-10

EC 1935/2004

41
Accessories
For PURE drum and container pumps

15 16

4 
1 
4 

3
2
1 
3 2

21
8
9

14
10 

13

12 

17 

19 
11  18 

1  Hose 10  Nozzle 16 Balancer

2 Hose clamp 11  Drum adapter 17  Equipotential bonding cable
3 Hose connection 12  Clamping device 18  Ex-plug
4  Hose connector 13 Installation flange 19  Ex-socket
8 Tri-Clamp locking clamp 14 Wall bracket 21 Flow meter
9 Tri-Clamp seal 15 Lifting device

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
42
 Accessories
For PURE drum and container pumps

Specification Order-No. Product detail

1 PVC spiral hose

Hose for food liquids made of PVC with woven layer and embedded galvanized steel spiral,
smooth interior and exterior, complies with EU Regulation 1935/2004 EG.

Operating pressure: up to 14 bar

Temperature of medium: -5 °C up to +65 °C
Nominal diameter: Weight:
DN 19 (3/4") 0,45 kg/m 0374-466
DN 25 (1") 0,67 kg/m 0374-467
DN 32 (1 1/4") 0,80 kg/m 0374-468
DN 38 (1 1/2") 1,15 kg/m 0374-469

1 Food chemical hose

Colour coding: “blue/white/blue”.
Ideal for food and luxury foodstuffs, pharmaceuticals, cosmetics and hygiene
products, complies with EU Regulation 1935/2004 EC and FDA and ATEX requirements.
Internal finish: UPE light with spiraled OHM conductive stripes UPE black, smooth,
non-bleeding, abrasion-resistant.
Intermediate layer: EPDM conductive
External finish: EPDM light grey, conductive, non-bleeding, ozone- and UV resistant,
hardly inflammable, Type  smaller 106 ohm (to EN 12115).
Operating pressure: up to 16 bar
Temperature of medium: -30 up to +100 °C
can be sterilized at 130°C for 30 minutes (open system)
Nominal diameter: Weight:
DN 19 (3/4”) 0,6 kg/m 0374-475 
DN 25 (1”) 0,8 kg/m 0374-476 
DN 32 (1 1/4”) 0,9 kg/m 0374-477 
DN 38 (1 1/2”) 1,2 kg/m 0374-478 

2 Stepless 1-ear hose clamp

1-ear hose clamp of stainless steel for the safe fixing
of different hoses onto the hose connection.
(Advices for selecting the suitable hose clamp - see hoses).
for Tri-Clamp 0204-870 / PVC spiral hose DN 19, fabric reinforced 0300-417
for Tri-Clamp 0204-870 / Food chemical hose DN 19 0300-422
for Tri-Clamp 0204-872 / PVC spiral hose DN 25, fabric reinforced 0300-446
for Tri-Clamp 0204-872 / Food chemical hose DN 25 0300-442
for Tri-Clamp 0204-874 / PVC spiral hose DN 32, fabric reinforced 0300-453
for Tri-Clamp 0204-874 / Food chemical hose DN 32 0300-460

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
43
Accessories
For PURE drum and container pumps

Product detail Specification Order-No.

3 Hose connection with Tri-Clamp

For connection of the hose onto the pump, nozzle or Tri-clamp armatures
(consisting of hose connector, locking clamp and seal)
Material: stainless steel (1.4404)
Connection: for hose with nominal diameter: Seal:
Tri-Clamp DN 32 DN 19 (3/4") EPDM 0204-870
Tri-Clamp DN 32 DN 19 (3/4") FPM 0204-871
Tri-Clamp DN 32 DN 25 (1") EPDM 0204-872
Tri-Clamp DN 32 DN 25 (1") FPM 0204-873
Tri-Clamp DN 32 DN 32 (1 1/4") EPDM 0204-874
Tri-Clamp DN 32 DN 32 (1 1/4") FPM 0204-875
Tri-Clamp DN 32 DN 38 (1 1/2") EPDM 0204-876
Caution: Tri-Clamp DN 32 DN 38 (1 1/2") FPM 0204-877
The assembler is responsible
for the professional bonding For individual needs, e.g. for connection to on-site Tri-clamp armatures:
Tri-clamp hose connector (1.4404):
of the hose according to the
DN 32 for hose DN 19 0370-093
current Pressure Equipment DN 32 for hose DN 25 0370-094
Directive. DN 32 for hose DN 32 0370-095
DN 32 for hose DN 38 0370-096
Tri-clamp locking clamp (1.4408):
DN 25/32/40 0370-088
Tri-Clamp seals:
DN 32, EPDM 0314-596
DN 32, FPM 0314-593
DN 40, EPDM 0314-598
DN 40, FPM 0314-595

3 Adapter fitting Tri-Clamp

DN 32 on tube fitting DIN 11851 0172-668
Rd 58 x 1/6 (DIN 405)

4 Hose connector with Tri-clamp

For connection of conductive hose onto the pump, nozzle or Tri-clamp armatures in explosive
hazardous area. The hose connector ensures a highly conduction transition between conductive
hose and pump/armature. The ohmic resistance between the armatures must be lower than
106 Ohm. (Consisting of hose connector, clamp collars, locking clamp and seal).
Material: stainless steel (1.4404)
Connection: for hose with nominal diameter: Seal:
Tri-Clamp DN 32 DN 19 (3/4") EPDM 0204-860 
Tri-Clamp DN 32 DN 19 (3/4") FPM 0204-861 
Tri-Clamp DN 32 DN 25 (1") EPDM 0204-862 
Tri-Clamp DN 32 DN 25 (1") FPM 0204-863 
Tri-Clamp DN 32 DN 32 (1 1/4") EPDM 0204-864 
Tri-Clamp DN 32 DN 32 (1 1/4") FPM 0204-865 
Tri-Clamp DN 40** DN 38 (1 1/2“) EPDM 0204-866 
Tri-Clamp DN 40** DN 38 (1 1/2“) FPM 0204-867 

For individual needs, e.g. for connection to on-site Tri-clamp armatures:

Tri-clamp hose connector (1.4404):
DN 32 for hose DN 19 0300-174
DN 32 for hose DN 25 0300-175
DN 32 for hose DN 32 0300-176
DN 40 for hose DN 38 0300-177
Clamp collar (1.4408):
DN 19 0300-180
DN 25 0300-181
DN 32 0300-182
DN 38 0300-183
Tri-Clamp locking clamp (1.4408):
DN 25/32/40 0370-088
Tri-Clamp Seals:
DN 32, EPDM 0314-592
DN 32, FPM 0314-593
DN 40, EPDM 0314-594
DN 40, FPM 0314-595

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
44
 Accessories
For PURE drum and container pumps

Specification Order-No. Product detail

10 Nozzle SS
Ideally suitable for filling and transferring liquids – also for combustible and
highly inflammable liquids – in food and pharmaceutical industry.
Stainless steel (1.4571) housing and valve tappet. With hoop guard and rotating joint.

Operating pressure: up to 3 bar

Viscosity: up to 760 mPas
Flow rate: up to 50 l/min. (water)
Temperature of medium: up to 80 °C
Weight: approx. 1 kg
Connection: Tri-Clamp DN 32
Seal: FPM or EPDM

Basic price nozzle SSG 0204-370 

Additional price version: PURE FPMG 0204-820 
Additional price version: PURE EPDMG 0204-821 

Please choose Order-No. basic price nozzle + Order No. additional price version: PURE
G

11 Drum adapter in PP
For fixing the pump in the drum opening.
For pump tube x 41 mm
Outer thread G 2 0208-007

11 Drum adapter in PE (electrically conductive)

For fixing the pump in the drum opening.
For pump tube x 41 mm
Outer thread G 2 0208-055 
Outer thread BCS 56 x 4 0208-052 
Outer thread BCS 70 x 6 0208-054 

12 Clamping device SS (1.4571)

To fasten the drum pumps in open-topped drums and containers.
For pump tube x 41 mm 0205-040 

13 Installation flange SS (1.4571)

For fixing the drum and container pump according to DIN 2573, DN 50, PN 6
to a companion flange. The flange is welded onto the pump tube.
For pump tube x 41 mm 0151-622

14 Wall bracket
For safe storage of the pump when not in use. 0204-308

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
45
Accessories
For PURE drum and container pumps

Product detail Specification Order-No.

15 Lifting device
To simplify the process of lifting the pump in and out of drums and containers.

For pumps with motors MA II and ME II 0211-047

For pumps with motors B4/GT 0214-196

16 Hoist
for drum pump, with infinitely adjustable load balancer 0371-012
for easy lifting and moving of the pump.

Load bearing capacity: 10-14 kg

Tackle: 2m

17 Equipotential bonding cable

Serves to create electrically conductive connection between explosion proof pump and
container as earthing and equipontential bonding function.

2 m long with fastening clip 0204-994 

18 Ex-plug
Ensures the safe mains connection of the pump in explosive hazardous areas.
CEE round plug in accordance with EEx de IIC T6, splash proof in compliance with IP 65.

3-pole (alternating current) system CEAG for motor ME II 0336-536 

3-pole (alternating current) system STAHL for motor ME II 0336-540 

19 Ex-socket
Ensures the safe mains connection of the pump in explosive hazardous areas.
CEE-socket in accordance with EEx de IIC T6, splash proof in compliance with IP 65.

3-pole (alternating current) system CEAG for motor ME II 0336-531 

3-pole (alternating current) system STAHL for motor ME II 0336-542 

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
46
 Accessories
For PURE drum and container pumps

Specification Order-No. Product detail

21 Modular electronical flow meter system, TS series, type VA10 in PURE version
For measuring of liquid foodstuffs, pharmaceuticals and cosmetics. Wide application range:
directly at the drum pump, decentralized or in-line operation possible.
With touch screen display, multilingual menu and simple plain text operation.
Also with volume preselection.
(Suitable connecting parts see items 8 and 9)

For more details see separate flow meter leaflet.

8 Tri-Clamp locking clamp (1.4408)

For fixing the flow meter VA10 PURE at the pump.
(Suitable seal see item 9)

DN 25/32/40 0370-088 

9 Tri-Clamp seal
For fixing the flow meter VA10 PURE at the pump.
DN 32, EPDM 0314-592
DN 32, FPM 0314-593
DN 40, EPDM 0314-594
DN 40, FPM 0314-595

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
47
Accessories
Accessories
For B70 PUREat and
a glance
B70 Sanitary

20

16 21

23

4
1 
4

2 3
6 1 
5 2
14 3

8
7
17 
13

12 

11 19 
18

1  Hose 8  Discharge spout 17 Equipotential bonding cable

2 Hose clamp 22  Locking device for drum inliner 18  Ex-plug
3 Hose connection 11 Drum adapter 19  Ex-socket
4 Hose connector 12 Clamping device 20  Lifting device
5 Tri-Clamp reducing piece 13 Installation flange 21 Impulse transmitter
6 Tri-Clamp locking clamp 14 Wall bracket 23  Operating unit
7  Discharge spout 16  Balancer

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
48
 Accessories
For B70 PURE and B70 Sanitary

Specification Order-No. Product detail

1 PVC spiral hose

Hose for food liquids made of PVC with woven layer and embedded galvanized steel spiral,
smooth interior and exterior, complies with EU Regulation 1935/2004 EG.

Operating pressure: max. 14 bar

Temp. of medium: -5 °C up to +65 °C
Nominal diameter: Weight:
DN 25 (1”) 0,67 kg/m 0374-467
DN 32 (1 1/4”) 0,80 kg/m 0374-468
DN 38 (1 1/2”) 1,15 kg/m 0374-469
DN 50 (2”) 1,60 kg/m 0374-470

1 Food chemical hose

Colour coding: “blue/white/blue”.
Ideal for food and luxury foodstuffs, pharmaceuticals, cosmetics and hygiene
products, complies with EU Regulation 1935/2004 EC and FDA and ATEX requirements.
Internal finish: UPE light with spiraled OHM conductive stripes UPE black, smooth,
non-bleeding, abrasion-resistant.
Intermediate layer: EPDM conductive
External finish: EPDM light grey, conductive, non-bleeding, ozone- and UV resistant,
hardly inflammable, Type  smaller 106 ohm (to EN 12115).
Operating pressure: up to 16 bar
Temperature of medium: -30 up to +100 °C
can be sterilized at 130°C for 30 minutes (open system)
Nominal diameter: Weight:
DN 25 (1”) 0,8 kg/m 0374-476 
DN 32 (1 1/4”) 0,9 kg/m 0374-477 
DN 38 (1 1/2”) 1,2 kg/m 0374-478 
DN 50 (2”) 1,9 kg/m 0374-479 

2 Stepless 1-ear hose clamp

1-ear hose clamp of stainless steel for the safe fixing
of different hoses onto the hose connection.
for Tri-Clamp 0204-872 / PVC spiral hose DN 25, fabric reinforced 0300-446
for Tri-Clamp 0204-872 / Food chemical hose DN 25 0300-442
for Tri-Clamp 0204-874 / PVC spiral hose DN 32, fabric reinforced 0300-453
for Tri-Clamp 0204-874 / Food chemical hose DN 32 0300-460
for Tri-Clamp 0204-876 / PVC spiral hose DN 38, fabric reinforced 0300-465
for Tri-Clamp 0204-876 / Food chemical hose DN 38 0300-465
for Tri-Clamp 0204-872 / PVC spiral hose DN 50, fabric reinforced 0300-473
for Tri-Clamp 0204-872 / Food chemical hose DN 50 0300-477

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
49
Accessories
For B70 PURE and B70 Sanitary

Product detail Specification Order-No.

3 Hose connection with Tri-Clamp

For connection of the hose onto the eccentric screw pump B70,
discharge spout or Tri-clamp armatures (consisting of hose connector,
locking clamp and seal)
Material: Stainless steel (1.4404)
Connection: for hose with nominal diameter: Seal:
Tri-Clamp DN 32** DN 19 (3/4") EPDM 0204-870
Tri-Clamp DN 32** DN 19 (3/4") FPM 0204-871
Tri-Clamp DN 32** DN 25 (1") EPDM 0204-872
Tri-Clamp DN 32** DN 25 (1") FPM 0204-873
Tri-Clamp DN 32** DN 32 (1 1/4") EPDM 0204-874
Caution:
Tri-Clamp DN 32** DN 32 (1 1/4") FPM 0204-875
The assembler is responsible Tri-Clamp DN 32** DN 38 (1 1/2") EPDM 0204-876
for the professional bonding Tri-Clamp DN 32** DN 38 (1 1/2") FPM 0204-877
of the hose according to the Tri-Clamp DN 50 DN 38 (1 1/2“) EPDM 0172-746
current Pressure Equipment Tri-Clamp DN 50 DN 38 (1 1/2“) FPM 0204-878
Directive. Tri-Clamp DN 50 DN 50 (2“) EPDM 0204-879
Tri-Clamp DN 50 DN 50 (2“) FPM 0204-880
For individual needs, e.g. for connection to on-site Tri-clamp armatures:
Tri-clamp hose connector (1.4404):
DN 32 for hose DN 19 0370-093
DN 32 for hose DN 25 0370-094
DN 32 for hose DN 32 0370-095
DN 32 for hose DN 38 0370-096
DN 50 for hose DN 50 0370-097
Tri-clamp locking clamp (1.4408):
DN 25/32/40 0370-088
DN 50 0370-084
Tri-Clamp Seals:
DN 32, EPDM 0314-592
DN 32, FPM 0314-593
DN 40, EPDM 0314-594
DN 40, FPM 0314-595
DN 50, EPDM 0314-590
DN 50, FPM 0314-591

** If using for eccentric screw pumps B70 an additional reducing piece DN 50

to DN 25/32/40 (Item 5) and a locking clamp (Item. 6) are required.

3 Adapter fitting Tri-Clamp

DN 32 on tube fitting DIN 11851 0172-668
Rd 58 x 1/6 (DIN 405)

DN 50 on tube fitting DIN 11851 0172-747

Rd 78 x 1/6 (DIN 405)

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
50
 Accessories
For B70 PURE and B70 Sanitary

Specification Order-No. Product detail

4 Hose connector with Tri-clamp

For connection of conductive hose onto the eccentric screw pump B70,
Discharge spout or Tri-Clamp armatures in explosive hazardous area.
The hose connector ensures a highly conduction transition between conductive
hose and pump/armature.
The ohmic resistance between the armatures must be lower than 106 Ohm.
(Consisting of hose connector, clamp collars, locking clamp and seal)
Material: Stainless steel (1.4404)
Connection: for hose Nominal diameter: Seal:
Tri-Clamp DN 32** DN 19 (3/4") EPDM 0204-860 
Tri-Clamp DN 32** DN 19 (3/4") FPM 0204-861 
Tri-Clamp DN 32** DN 25 (1") EPDM 0204-862 
Tri-Clamp DN 32** DN 25 (1") FPM 0204-863 
Tri-Clamp DN 32** DN 32 (1 1/4") EPDM 0204-864 
Tri-Clamp DN 32** DN 32 (1 1/4") FPM 0204-865 
Tri-Clamp DN 40** DN 38 (1 1/2“) EPDM 0204-866 
Tri-Clamp DN 40** DN 38 (1 1/2“) FPM 0204-867 
Tri-Clamp DN 50 DN 50 (2“) EPDM 0204-868 
Tri-Clamp DN 50 DN 50 (2“) FPM 0204-869 

For individual needs, e.g. for connection to on-site Tri-clamp armatures:

Tri-clamp hose connector (1.4404):
DN 32 for hose DN 19 0300-174
DN 32 for hose DN 25 0300-175
DN 32 for hose DN 32 0300-176
DN 40 for hose DN 38 0300-177
DN 50 for hose DN 50 0300-178
Clamp collar (1.4408):
DN 19 0300-180
DN 25 0300-181
DN 32 0300-182
DN 38 0300-183
DN 50 0300-184
Tri-Clamp locking clamp (1.4408):
DN 25/32/40 0370-088
DN 50 0370-084
Tri-Clamp Seals:
DN 32, EPDM 0314-592
DN 32, FPM 0314-593
DN 40, EPDM 0314-594
DN 40, FPM 0314-595
DN 50, EPDM 0314-590
DN 50, FPM 0314-591

** If using for eccentric screw pumps B70 an additional reducing piece DN 50

to DN 25/32/40 (Item 5) and a locking clamp (Item. 6) are required.

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
51
Accessories
For B70 PURE and B70 Sanitary

Product detail Specification Order-No.

5 Tri-Clamp reducing piece

Suitable for connection of Tri-Clamp armatures DN 25/32/40
to a Tri-Clamp DN 50 connecting piece. Material: Stainless steel (1.4408)

DN 50 onto DN 25/32/40 0300-185 

6 Tri-Clamp locking clamp

Suitable for connection of armatures DN 50 to a connecting piece DN 50.
Material: Stainless steel (1.4408) incl. seal.

DN 50, Seal EPDM 0172-745 

DN 50, Seal FPM 0204-477 

7 Discharge spout
Zur Montage am Schlauchende zum direkten Ab- and Umfüllen in Behältnissen,
inkl. Seal and Klammer.
Material: Stainless steel (1.4301/EPDM)

Tri-Clamp DN 32 0370-098 
Tri-Clamp DN 40 0370-099 

8 Discharge spout
For mounting at the end of the hose for direct filling and transferring
in containers incl. seal and clamp.
Material: Stainless steel (1.4571, 1.4404/EPDM).

Tri-Clamp DN 50 0172-748 

22 Locking device at the bottom for drum inliner

For mounting onto the pump foot.
Protects sensitive drum inliner and bags from damage.

For pump tube B70V-H Sanitary 0172-771 

11 Drum adapter in PP
For fixing the eccentric screw pump B70 in the drum opening.
For pump tube x 52-54 mm
Universal for all current drum and bunghole openings 0208-056

12 Clamping device SS (1.4571)

To fasten the eccentric screw pump B70 in open-topped drums and containers.
For pump tube x 52-54 mm 0205-052 

13 Installation flange SS (1.4571)

For fixing the eccentric screw pump B70 according to DIN 2573, DN 50, PN 6,
to a companion flange. The flange is welded onto the pump tube.
For pump tube x 52-54 mm 0170-310

14 Wall bracket
For safe storage of the eccentric screw pump B70 when not in use.

for B70V 0204-309

for B70V-SR 0204-307

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
52
 Accessories
For B70 PURE and B70 Sanitary

Specification Order-No. Product detail

16 Hoist
for eccentric screw pumps, with infinitely adjustable load balancer
for easy lifting and moving of the pump
Load bearing capacity: 18-22 kg Tackle: 2 m 0371-013
Load bearing capacity: 22-25 kg Tackle: 2 m 0371-014
Load bearing capacity: 25-30 kg Tackle: 2 m 0371-015

17 Equipotential bonding cable

Serves to create electrically conductive connection between explosion proof pump
and container as earthing and equipontential bonding function.
2 m long with fastening clip 0204-994 
2 m long with two fastening clips for B70V-H Sanitary 0204-992 

18 Ex-plug
Ensures the safe mains connection of the pump in explosive hazardous areas.
CEE round plug in accordance with EEx de IIC T6, splash proof in compliance with IP 65.
3-pole (alternating current) CEAG for B70V-SR (Ex) 0336-536 
3-pole (alternating current) STAHL for B70V-SR (Ex) 0336-540 
5-pole (three phase current) CEAG for B70V (Ex) 0336-537 
5-pole (three phase current) STAHL for B70V (Ex) 0336-541 

19 Ex-socket
Ensures the safe mains connection of the pump in explosive hazardous areas.
CEE-socket in accordance with EEx de IIC T6, splash proof in compliance with IP 65.
3-pole (alternating current) CEAG for B70V-SR (Ex) 0336-531 
3-pole (alternating current) STAHL for B70V-SR (Ex) 0336-542 
5-pole (three phase current) CEAG for B70V (Ex) 0336-420 
5-pole (three phase current) STAHL for B70V (Ex) 0336-543 

23 Motor protective switch for motor B70V (Ex)

Explosion proof according to EEx de IIC T6 with thermal and electromagnetic trip,
protection class IP 66. A lifting device and two cable protective coverings
are necessary for the mounting.
Ex, 1,6 - 2,5 A 0335-414 
Ex, 2,5 - 4,0 A 0335-419 
Ex, 4,0 - 6,3 A 0335-420 

18 Coupling part, motor side

When sourcing your own motor please order the correct coupling
to suit the relative shaft diameter.
Shaft diameter: ø 14 mm 0302-028
ø 19 mm 0302-027
ø 24 mm 0302-026
ø 28 mm (only in combination with intermediate flange) 0302-029

Intermediate flange for ø 28 mm 0172-850

19 Lifting device
To simplify the process of lifting the pump in and out of drums or containers.
When using an explosion proof driving motor the Ex-protective plug
is mounted onto the lifting device.
for pump tube HD-E 0155-154
for B70V-SR with universal motor 0174-607

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
53
Accessories
Contact-free indirect measurement

Product detail Specification Order-No.

1 Lifting device with integrated impulse sensor

Comprises of:

Impulse sensor with connecting cable and 14-wire

coupling plug, lifting device and flange plate.
(Please order suitable impulse transmitter and control unit additionally)

Additional price* for three-phase motors up to 1.1 kW 0172-891

Additional price* for three-phase motors up to 1.5 kW 0172-892 

and explosion proof three-phase motors Ex

Complete set for retrofitting available pumps 0172-890 

*(Please indicate Ref. No. for additional price when ordering a pump)

2 Impulse transmitter
Must be ordered additionally suitable for the shaft diameter of the motor

For shaft diameters:  19 mm 0172-824

 20 mm 0172-825
 24 mm 0172-826
 25 mm 0172-827
 28 mm 0172-828
 30 mm 0172-829

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
54
 Accessories
Contact-free indirect measurement

Specification Order-No. Product detail

3 Control unit
With touch screen display and menu-navigated operation.
Is intended for evaluation of impulses and display of flow volume,
battery-operated**

Control unit BE10 0230-000

Control unit Ex BE10B 0230-010 

Power supply unit NG10 230 V

for external power supply of the operating unit
220-240 V, 50-60 Hz, II (2) G [Ex ib] IIC 0230-230

Accessories optional

Relay module RM30

For three-phase motors up to 1.5 kW
allows the filling with pre-selection (batch function),
400 V, 1.5 kW, 50 Hz, II (2) G [Ex ib] IIC 0230-220

Power cable RM30 400V

400 V, 50 Hz, 5-wire, 5 m long For RM30 0211-388

Connecting cable motor RM30 400V

400 V, 50 Hz, 5-wire, 0.6 m long For RM30 0211-386

Relay module RM10

For three-phase motors with frequency converter
allows the filling with pre-selection (batch function),
220-240 V, 50-60 Hz, II (2) G [Ex ib] IIC 0230-200

Power cable RM10 230V

230 V, 50 Hz, 5 m long For RM10 0211-155

Adapter cable motor RM-FU 230V/24V

For three-phase motors with frequency converter
230V AC/24V DC For RM10 0230-323

** Limited battery operation without power supply unit possible

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
55
Flow measurement without volume preselection - TS
for aqueous, fatty and highly inflammable foodstuffs

PE
S O RA

TIO
MAI

N
PURE
Flow meters type VA10 in PURE-version are
optionally available for the food-, cosmetics and
pharmaceutical industry.

Technical data Typ VA10 PURE Typ VA10 Ex PURE

Range of use aqueous and fatty foodstuffs highly inflammable foodstuffs

Flow volume l/min. min. 10 – max. 100 min. 10 – max. 100
Temperature °C 80 60
Viscosity mPas 5.000 5.000
Operating pressure bar 10 10
Accuracy ± 1% ± 1%
Inlet and Outlet port Tri-Clamp DN 32 Tri-Clamp DN 32
LCD display Touch-Screen 63x63 mm, 128x128 pixels, sub-total volume can be reset
Menu language DE, GB, ES, FR, IT, NL, PT, RU
Materials:
Housing Stainless steel (1.4581/1.4571)* Stainless steel (1.4581/1.4571)*
Measuring chamber Steinless steel (1.4581/1.4571) PTFE/PVDF Steinless steel (1.4581/1.4571) PTFE/PVDF/PE
Seals FEP FEP
Magnet PVDF encapsulated PVDF encapsulated
Type of protection:
Operating unit – II 2 G Ex ib IIB T4**
Basic flow meter – II 2 G T4
Protection class IP 55 IP 55
Weight kg 3,7 3,7
Order-No. basic flow meter G
0231-049 0231-040 
* Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance list.
** Protection class II 2 G Ex ib IIC T4 on request.

Order-No. PURE additional price 0230-330 0230-331

G
Please choose Order-No. basic flow meter + Order-No. PURE additional price

Recommended Accessories: Power supply unit NG10***

Voltage V 220-240
Frequency Hz 50-60
Order-No. 0230-230
*** Limited battery operation without power supply unit possible.

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
56
 Flow measurement with volume preselection - TS
for aqueous, fatty and highly inflammable foodstuffs

PE
S O RA

TIO
MAI

N
PURE
Flow meters type VA10 in PURE-version are
optionally available for the food-, cosmetics and
pharmaceutical industry.

Technical data Typ VA10/RM10 PURE Typ VA10/Ex-RM10mK PURE

Range of use aqueous and fatty foodstuffs highly inflammable foodstuffs

Flow volume l/min. min. 10 – max. 100 min. 10 – max. 100
Temperature °C 80 40
Viscosity mPas 5.000 5.000
Operating pressure bar 10 10
Accuracy ± 1% ± 1%
Inlet and Outlet port Tri-Clamp DN 32 Tri-Clamp DN 32
LCD display Touch-Screen 63x63 mm, 128x128 pixels, sub-total volume can be reset
Menu language DE, GB, ES, FR, IT, NL, PT, RU
Materials:
Housing Stainless steel (1.4581/1.4571)* Stainless steel (1.4581/1.4571)*
Measuring chamber Stainless steel (1.4581/1.4571) PTFE/PVDF Stainless steel (1.4581/1.4571) PTFE/PVDF/PE
Seals FEP FEP
Magnet PVDF encapsulated PVDF encapsulated
Type of protection:
Operating unit – II 2 G Ex ib IIB T4**
Basic flow meter – II 2 G T4
Protection class IP 55 IP 55
Weight kg 4,1 6,7
Relay module RM10 230 V Ex-RM10mK 230 V
Voltage V 220-240 220-240
Frequecy Hz 50-60 50-60
Switching outputs 2 NO (potentially bound) 2 NO (potentially bound)
Outpump 1 (pump) 8 A, cos > 0,7 5 A, cos > 0,7
Output 2 (valve) 0,5 A 0,315 A
Type of protction – II 2 G Ex eb mb [ib] IIC T4
Order-No. basic flow meterG 0231-041 on request
* Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance list.
** Protection class II 2 G Ex ib IIC T4 on request.

Order-No. PURE additional priceG 0230-330 0230-331

Please choose Order-No. basic flow meter + Order-No. PURE additional price
G

 Suitable for transferring combustible and easy inflammable liquids (e.g. ethanol, petrol)
or in explosive hazard area.
57
 Twice the COMPETENCE...

Professional Fluid Management

Drum pump sets Flow meter systems
Drum and container pumps Air operated double diaphragm pumps
Eccentric screw drum pumps Vertical and horizontal centrifugal pumps

Lutz Pumpen GmbH

P.O. Box 14 62 · D-97864 Wertheim · Phone: (+49 93 42) 8 79-0 · Fax: (+49 93 42) 87 94 04 · E-Mail: info@lutz-pumpen.de

www.lutz-pumpen.de
...simply UNIQUE

A Measured Step Forward

Dosing pumps and accessories System and process technology
Chlorinators Chemical centrifugal pumps
Measuring and control technology Water disinfection

Lutz-Jesco GmbH
Am Bostelberge 19 · D-30900 Wedemark · Phone (+49 51 30) 58 02-0 · Fax (+49 51 30) 58 02 68 · E-Mail: info@lutz-jesco.com

www.lutz-jesco.com
 Technischer Stand 06.16    Order No. 0699-315  Mt. 250/10.16

Lutz Pumpen GmbH

P.O. Box 14 62
D-97864 Wertheim
Phone: (0 93 42) 8 79-0
Fax: (0 93 42) 87 94 04
E-Mail: info@lutz-pumpen.de

w w w. l u t z - p u m p e n . d e