STT13005D
High voltage fast-switching NPN power transistor
Features
■ Integrated antiparallel collector-emitter diode
■ High voltage capability
■ Minimum lot-to-lot spread for reliable operation
■ Very high switching speed
Applications 1
2
■ Electronic ballast for fluorescent lighting 3
■ Flyback and forward single transistor low SOT-32
power converters
Description Figure 1. Internal schematic diagram
The device is manufactured using high voltage
multi-epitaxial planar technology for high
switching speeds and medium voltage capability.
It uses a cellular emitter structure with planar
edge termination to enhance switching speeds
while maintaining the wide RBSOA.
The device is designed for use in lighting
applications and low cost switch-mode power
supplies.
Table 1. Device summary
Order codes Marking Package Packaging
STT13005D T13005D SOT-32 Tube
STT13005D-K T13005D SOT-32 Bag
November 2009 Doc ID 14897 Rev 2 1/10
www.st.com 10
Electrical ratings STT13005D
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCES Collector-emitter voltage (VBE = 0) 700 V
VCEO Collector-emitter voltage (IB = 0) 400 V
VEBO Emitter-base voltage (IC = 0) 9 V
IC Collector current 2 A
ICM Collector peak current (tP < 5 ms) 4 A
IB Base current 1 A
IBM Base peak current (tP < 5 ms) 2 A
PTOT Total dissipation at Tc = 25 °C 45 W
TSTG Storage temperature -65 to 150 °C
TJ Max. operating junction temperature 150 °C
Table 3. Thermal data
Symbol Parameter Value Unit
RthJC Thermal resistance junction-case Max 2.8 °C/W
2/10 Doc ID 14897 Rev 2
STT13005D Electrical characteristics
2 Electrical characteristics
Tcase = 25 °C unless otherwise specified.
Table 4. Electrical characteristics
Symbol Parameter Test Conditions Min. Typ. Max. Unit
Collector cut-off current VCE = 700 V 100 µA
ICES
(VBE = 0) VCE = 700 V TC = 125 °C 500 µA
Collector cut-off current
ICEO VCE = 400 V 250 µA
(IB = 0)
Emitter-base voltage
VEBO IE = 10 mA 9 V
(IC = 0)
Collector-emitter
VCEO(sus) (1) sustaining voltage IC = 10 mA 400
V
(IB = 0)
IC = 0.5 A IB = 125 mA 0.5 V
Collector-emitter
VCE(sat) (1) IC = 0.8 A _ IB = 0.2 A 1 V
saturation voltage
IC = 1.6 A _ IB = 0.4 A 1.5 V
IC = 0.5 A IB = 125 mA 1 V
Base-emitter saturation
VBE(sat) (1) IC = 0.8 A _ IB = 0.2 A 1.3 V
voltage
IC = 1.6 A _ IB = 0.4 A 1.5 V
IC = 0.5 A _ VCE = 5 V 10 50
hFE (1) DC current gain
IC = 2 A _ _ VCE = 5 V 8
Resistive load
tr Rise time IC = 1 A VCC= 125 V 0.4 0.7 µs
ts Storage time IB1 = -IB2 = 0.2 A 3.2 4.5 µs
tf Fall time 0.25 0.4 µs
Inductive load IC = 1 A IB1 = 0.2 A
ts Storage time VBE(off) = -5 V L= 50 mH 0.8 µs
tf Fall time VClamp = 300 V 0.16 µs
VF Diode forward voltage IF = 1 A 2.5 V
1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %
Doc ID 14897 Rev 2 3/10
Electrical characteristics STT13005D
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area Figure 3. Derating curve
Figure 4. DC current gain (VCE = 1 V) Figure 5. DC current gain (VCE = 5 V)
Figure 6. Collector-emitter saturation Figure 7. Base-emitter saturation
voltage voltage
4/10 Doc ID 14897 Rev 2
STT13005D Electrical characteristics
Figure 8. Inductive load fall time Figure 9. Inductive load storage tim
Figure 10. Resistive load fall time Figure 11. Resistive load storage time
Figure 12. Reverse biased SOA
Doc ID 14897 Rev 2 5/10
Electrical characteristics STT13005D
2.2 Test circuits
Figure 13. Resistive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
Figure 14. Inductive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
3. Fast recovery rectifier
6/10 Doc ID 14897 Rev 2
STT13005D Package mechanical data
3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Doc ID 14897 Rev 2 7/10
Package mechanical data STT13005D
8/10 Doc ID 14897 Rev 2
STT13005D Revision history
4 Revision history
Table 5. Document revision history
Date Revision Changes
10-Jul-2008 1 Initial release.
03-Nov-2009 2 Added order code STT13005D-K Table 1 on page 1.
Doc ID 14897 Rev 2 9/10
STT13005D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10 Doc ID 14897 Rev 2
