SALES SUPPORT DOCUMENT
ML-1110 / ML-1110.SCI
MAXLOGIC INTELLIGENT ANALOGUE ADDRESSABLE SMOKE DETECTOR / SHORT CIRCUIT ISOLATOR
ML-1110 / ML-1110.SCI (short circuit isolator) detector
utilizes the light scatter sensing principle. It has an
infrared light source, which emits signals and photo-
diode, which senses the scattering light with the effect of
smoke entering the chamber. The chamber is designed for
Protection from dust, insects and other external
interferences. Detectors are suitable for indoor use.
PRODUCT FEATURES
• Compatible with EN 54-7 and EN 54-17
• Optional model with short circuit isolator
• Twin fire alarm indicators for 360° viewing
• ‘Soft’ addressable by use of address programmer
• Communication interrupt for fast fire alarm detection in 1.5 sec
• Remote indicator output
• Protection from electromagnetic interference
• Compatible with MAXLOGIC series addressable panels
• Microcontroller based design
• Produced by use of surface mount technology
• Compatible with ML-0140 series detector base
• Compatible with ML-0141 series detector base with buzzer
• Compatible with ML-0121 series surface mounting back box
• Compatible with ML-0150 series recessed mounting base
• Stable sensitivity
• RY LED glows Red in case of fire, Yellow in case of pollution and fault conditions.
• User friendly and easy mounting
• Low optical measurement result warning
• Low power consumption
• The product plastic is impact-proof.
SDD-370 Rev.No:2 ML-1110/ML-1110.SCI Intelligent Analogue Addressable Smoke Detector S/P 1/3
TECHNICAL SPECIFICATIONS
Supply voltage 33V -18V DC Loop powered
Detection source Optical chamber
Quiescence / Alarm current (max) 600µA/4mA
Remote indicator output (max) 2,5mA
2 white LED (Red in case of fire, Yellow in case
Alarm indicator
of pollution and error)
Operating temperature (-10°C) - (+50°C)
(-30°C) - (+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (socket is included) Ø:106 mm, h:51 mm
Weight (socket is included) 100 g
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
TECHNICAL SPECIFICATIONS (SHORT-CIRCUIT ISOLATOR)
Max. Power supply (Vmax) 33V
Nominal Power supply (Vnom) 26V
Minimum Power supply (Vmin) 18V
Maximum Switch current (ISmax) 1A
Maximum Operating current (ICmax) 1A
Isolation current (ILmax) < 45 mA
Maximum contact resistance (ZCmax) 500 mΩ
Isolation voltage (VSOmin - VSOmax) 8V - 13V
Normal status transition voltage
8V - 13V
(VSCmin-VSCmax)
MODELS
Product Description
ML-1110 Maxlogic Intelligent Analogue Addressable Smoke
Detector
ML-1110.SCI Maxlogic Intelligent Analogue Addressable Smoke
Detector with Short Circuit Isolator
SDD-370 Rev.No:2 ML-1110/ML-1110.SCI Intelligent Analogue Addressable Smoke Detector S/P 2/3
CONNECTION DIAGRAM
SDD-370 Rev.No:2 ML-1110/ML-1110.SCI Intelligent Analogue Addressable Smoke Detector S/P 3/3
SALES SUPPORT DOCUMENT
ML-1120 / ML-1120.SCI
MAXLOGIC INTELLIGENT ANALOGUE ADDRESSABLE SYSTEM A1S FIXED TEMP HEAT DETECTOR
ML-1120 / ML-1120.SCI (short circuit isolator) A1S fixed
temp heat detector detects temperature change by
temperature-sensitive thermistors. When the
environmental temperature reached 60°C this detected
analog value is interpreted by the electronic circuits and
fire is detected. False alarms are prevented by advanced
algorithm before the generated fire signal. Detectors are
suitable for indoor use.
PRODUCT FEATURES
• Compatible with EN 54-5 and EN 54-17
• Optional model with short circuit isolator
• Twin fire alarm indicators for 360° viewing
• ‘Soft’ addressable by use of address programmer
• Communication interrupt for fast fire alarm detection in 1.5 sec
• Remote indicator output
• Protection from electromagnetic interference
• Compatible with MAXLOGIC series addressable panels
• Microcontroller based design
• Produced by use of surface mount technology
• Compatible with ML-0140 series detector base
• Compatible with ML-0141 series detector base with buzzer
• Compatible with ML-0121 series surface mounting back box
• Compatible with ML-0150 series recessed mounting base
• Stable sensitivity
• RY LED glows Red in case of fire, Yellow in case of pollution and fault conditions.
• User friendly and easy mounting
• Low power consumption
• The product plastic is impact-proof
SDD-438 Rev.No:1 ML-1120/ML-1120.SCI Intelligent Addressable Heat Detector S/P 1/3
TECHNICAL SPECIFICATIONS
Supply voltage 33V -18V DC Loop Powered
Detection source Thermistor
Heat Class A1S
Quiescence / Alarm current (max) 600µA/4mA
Remote indicator output (max) 2,5mA
2 white LED (Red in case of fire, Yellow in case
Alarm indicator
of Error)
Operating temperature (-10°C) - (+50°C)
Storage temperature (-30°C) - (+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (socket is included) Ø:106 mm, h:51 mm
Weight (socket is included) 95 gr
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
TECHNICAL SPECIFICATION (SHORT-CIRCUIT ISOLATOR)
Max. Power supply (Vmax) 33V
Nominal Power supply (Vnom) 26V
Minimum Power supply (Vmin) 18V
Maximum Switch current (ISmax) 1A
Maximum Operating current (ICmax) 1A
Isolation current (ILmax) < 45 mA
Maximum contact resistance (ZCmax) 500 mΩ
Isolation voltage (VSOmin - VSOmax) 8V - 13V
Normal status transition voltage
8V - 13V
(VSCmin-VSCmax)
MODELS
Product Description
ML-1120 Intelligent Analogue Addressable System A1S Fixed
Temp Heat Detector
ML-1120.SCI Intelligent Analogue Addressable System A1S Fixed
Temp Heat Detector With Short Circuit Isolator
SDD-438 Rev.No:1 ML-1120/ML-1120.SCI Intelligent Addressable Heat Detector S/P 2/3
CONNECTION DIAGRAM
SDD-438 Rev.No:1 ML-1120/ML-1120.SCI Intelligent Addressable Heat Detector S/P 3/3
SALES SUPPORT DOCUMENT
ML-1130 / ML-1130.SCI
MAXLOGIC INTELLIGENT ADDRESSABLE HEAT DETECTOR / SHORT CIRCUIT ISOLATOR
ML-1130 / ML-1130.SCI (short circuit isolator) Heat
detector detects temperature change by temperature-
sensitive thermistors. When the temperature has been
changed 30 °C and/or environmental temperature
reached 60°C this detected analog value is interpreted
by the electronic circuits and fire is detected. False
alarms are prevented by advanced algorithm before
the generated fire signal. Detectors are suitable for
indoor use.
PRODUCT FEATURES
• Compatible with EN 54-5 and EN 54-17
• Optional model with short circuit isolator
• Twin fire alarm indicators for 360° viewing
• ‘Soft’ addressable by use of address programmer
• Communication interrupt for fast fire alarm detection in 1.5 sec
• Remote indicator output
• Protection from electromagnetic interference
• Compatible with MAXLOGIC series addressable panels
• Microcontroller based design
• Produced by use of surface mount technology
• Compatible with ML-0140 series detector base
• Compatible with ML-0141 series detector base with buzzer
• Compatible with ML-0121 series surface mounting back box
• Compatible with ML-0150 series recessed mounting base
• Stable sensitivity
• RY LED glows Red in case of fire, Yellow in case of pollution and fault conditions.
• User friendly and easy mounting
• Low power consumption
• The product plastic is impact-proof
SDD-371 Rev.No:3 ML-1130 Intelligent Addressable Heat Detector S/P 1/3
TECHNICAL SPECIFICATIONS
Supply voltage 33V -18V DC Loop Powered
Detection source Thermistor
Heat Class A1R & A1S
Quiescence / Alarm current (max) 600µA/4mA
Remote indicator output (max) 2,5mA
2 white LED (Red in case of fire, Yellow in case
Alarm indicator
of Error)
Operating temperature (-10°C) - (+50°C)
Storage temperature (-30°C) - (+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (socket is included) Ø:106 mm, h:51 mm
Weight (socket is included) 95 gr
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
TECHNICAL SPECIFICATION (SHORT-CIRCUIT ISOLATOR)
Max. Power supply (Vmax) 33V
Nominal Power supply (Vnom) 26V
Minimum Power supply (Vmin) 18V
Maximum Switch current (ISmax) 1A
Maximum Operating current (ICmax) 1A
Isolation current (ILmax) < 45 mA
Maximum contact resistance (ZCmax) 500 mΩ
Isolation voltage (VSOmin - VSOmax) 8V - 13V
Normal status transition voltage
8V - 13V
(VSCmin-VSCmax)
MODELS
Product Description
ML-1130 Maxlogic Intelligent Addressable Heat Detector
ML-1130.SCI Maxlogic Intelligent Addressable Heat Detector With
Short Circuit Isolator
SDD-371 Rev.No:3 ML-1130 Intelligent Addressable Heat Detector S/P 2/3
CONNECTION DIAGRAM
SDD-371 Rev.No:3 ML-1130 Intelligent Addressable Heat Detector S/P 3/3
SALES SUPPORT DOCUMENT
ML-1140 / ML-1140.SCI
MAXLOGIC INTELLIGENT ADDRESSABLE MULTISENSOR DETECTOR / SHORT CIRCUIT ISOLATOR
ML-1140 / ML-1140.SCI (short circuit isolator) The multi-
sensor has a photo-electric smoke detection chamber and
a temperature sensitive thermistor. The chamber is
designed for protection from dust, insects and other
external interferences. The design of the chambers
provides maximum sensitivity to smoke and temperature
change. The detector is suitable for the internal
environment. Detectors are suitable for indoor use.
PRODUCT FEATURES
• Compatible with EN 54-7, EN 54-5 and EN 54-17
• Optional Short circuit isolator model
• Twin fire alarm indicators for 360° viewing
• ‘Soft’ addressable by use of address programmer
• Communication interrupt for fast fire alarm detection in 1.5 sec
• Remote indicator output
• Protection from electromagnetic interference
• Compatible with MAXLOGIC series addressable panels
• Microcontroller based design
• Produced by use of surface mount technology
• Compatible with ML-0140 series detector base
• Compatible with ML-0141 series detector base with buzzer
• Compatible with ML-0121 series surface mounting back box
• Compatible with ML-0150 series recessed mounting base
• Stable sensitivity
• RY LED glows Red in case of fire, Yellow in case of pollution and fault conditions.
• User friendly and easy mounting
• Low power consumption
• The product plastic is impact-proof
SDD-372 Rev.No:3 ML-1140 Intelligent Addressable Multisensor Detector S/P 1/3
TECHNICAL SPECIFICATIONS
Supply voltage 33V -18V DC Loop Powered
Detection source Optical Chamber+ Thermistor
Heat Class A1R
Quiescence / Alarm current (max) 600µA/4mA
Remote indicator output (max) 2,5mA
2 white LED (Red in case of fire, Yellow in case
Alarm indicator
of Error and pollution)
Operating temperature (-10°C) - (+50°C)
Storagetemperature (-30°C) - (+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (socket is included) Ø:106 mm, h:51 mm
Weight (socket is included) 100 gr
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
TECHNICAL SPECIFICATION (SHORT-CIRCUIT ISOLATOR)
Max. Power supply (Vmax) 33V
Nominal Power supply (Vnom) 26V
Minimum Power supply (Vmin) 18V
Maximum Switch current (ISmax) 1A
Maximum Operating current (ICmax) 1A
Isolation current (ILmax) < 45 mA
Maximum contact resistance (ZCmax) 500 mΩ
Isolation voltage (VSOmin - VSOmax) 8V - 13V
Normal status transition voltage
8V - 13V
(VSCmin-VSCmax)
MODELS
Product Description
ML-1140 Maxlogic Intelligent Addressable Multisensor Detector
ML-1140.SCI Maxlogic Intelligent Addressable Multisensor Detector
With Short Circuit Isolator
SDD-372 Rev.No:3 ML-1140 Intelligent Addressable Multisensor Detector S/P 2/3
CONNECTION DIAGRAM
SDD-372 Rev.No:3 ML-1140 Intelligent Addressable Multisensor Detector S/P 3/3
SALES SUPPORT DOCUMENT
ML-1130BS
MAXLOGIC INTELLIGENT ADDRESSABLE SYSTEM CLASS BS HEAT DEDECTOR
ML-1130BS intelligent addressable system BS Class Heat
detector detects temperature change by temperature-
sensitive thermistors. When the environmental
temperature reached 80°C this detected analog value is
interpreted by the electronic circuits and fire is detected.
False alarms are prevented by advanced algorithm before
the generated fire signal. Detectors are suitable for indoor
use.
PRODUCT FEATURES
• Compatible with EN 54-5
• Twin fire alarm indicators for 360° viewing
• ‘Soft’ addressable by use of address programmer
• Communication interrupt for fast fire alarm detection in 1.5 sec
• Remote indicator output
• Protection from electromagnetic interference
• Compatible with MAXLOGIC series addressable panels
• Microcontroller based design
• Produced by use of surface mount technology
• Compatible with ML-0144 series detector base
• Stable sensitivity
• RY LED glows Red in case of fire, Yellow in case of fault conditions
• User friendly and easy mounting
• Low power consumption
• The product plastic is impact-proof
SDD-436 Rev.No:1 ML-1130BS Intelligent Addressable Class BSHeat Detector S/P 1/2
TECHNICAL SPECIFICATIONS
Supply voltage 33V -18V DC Loop Powered
Detection source Thermistor
Heat Class BS
Quiescence / Alarm current (max) 600µA/4mA
Remote indicator output (max) 2,5mA
2 white LED (Red in case of fire, Yellow in case
Alarm indicator
of Error)
Operating temperature (-10°C) - (+65°C)
Storage temperature (-30°C) - (+90°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (socket is included) Ø:106 mm, h:51 mm
Weight (socket is included) 145 gr
Construction PC+ABS
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
CONNECTION DIAGRAM
SDD-436 Rev.No:1 ML-1130BS Intelligent Addressable Class BSHeat Detector S/P 2/2
SALES SUPPORT DOCUMENT
MG-9100
INTELLIGENT ANALOGUE ADDRESSABLE PHOTO-ELECTRIC SMOKE DETECTOR
MG-9100 Intelligent addressable smoke
detectors are compatible with MAXLOGIC series
addressable panels. Detector utilizes the light
scatter principle. It has an infrared light source,
which emits signals and a photo-diode, which
senses the scattering light with the effect of
smoke entering the chamber. The chamber is
designed for protection from dust, insects and
other external interferences. The detector is
suitable for indoor use.
PRODUCT FEATURES
- Compatible with EN 54-7
- Twin fire alarm indicators for 360° viewing
- ‘Soft’ addressable by use of address programmer
- Remote indicator output
- Communication interrupt for fast fire alarm detection in 1.5sec
- Stable sensitivity
- Protection from electromagnetic interference
- Compatible with MG-3510 series mounting base
- Compatible with MG-3530 series mounting base with buzzer
- Compatible with MG-3600 series recessed mounting base
- Compatible with ML-0121 series surface mounting back box
- Microprocessor controlled
- Clamp terminals to ensure firm contact with the base
- Produced by use of surface mount technology
SDD-034 Rev.No:2 MG-9100 Intelligent analogue addressable photo-electric smoke detector S/P 1/2
TECHNICAL SPECIFICATIONS
Operating voltage 18-33V DC
Detection principle Optical chamber
Quiescent current (max) 600µA
Alarm current (max) 6mA
Remote indicator output (max) 4mA
Indicators 2 transparent LED (red on alarm)
Operating temperature (-10°C)-(+50°C)
Storage temperature (-30°C)-(+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (inc. base) Ø:100 mm, h:50 mm
Weight (inc. base) 145g
Compatible bases MG-3510 detector base
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
CONNECTION DIAGRAM
MG Series Intelligent Analogue Addressable Detector Base (MG-3510) Connection Diagram
MG Series Intelligent Analogue Addressable Remote Indicator (MG-4000.A) Connection Diagram
SDD-034 Rev.No:2 MG-9100 Intelligent analogue addressable photo-electric smoke detector S/P 2/2
SALES SUPPORT DOCUMENT
MG-9300
INTELLIGENT ANALOGUE ADDRESSABLE HEAT DETECTOR
MG-9300 Intelligent addressable heat detectors
are compatible with MAXLOGIC series
addressable panels. Heat detector detects
temperature change by temperature-sensitive
thermistors. If the change in ambient
temperature exceeds the norms specified in EN
54-5, sensed analogue value is interpreted by
electronic circuits and a fire alarm signal is
generated. The detector is suitable for indoor
use.
PRODUCT FEATURES
- Compatible with EN 54-5
- Twin fire alarm indicators for 360° viewing
- ‘Soft’ addressable by use of address programmer
- Remote indicator output
- Communication interrupt for fast fire alarm detection in 1.5sec
- Stable sensitivity
- Protection from electromagnetic interference
- Compatible with MG-3510 series mounting base
- Compatible with MG-3530 series mounting base with buzzer
- Compatible with MG-3600 series recessed mounting base
- Compatible with ML-0121 series surface mounting back box
- Microprocessor controlled
- Clamp terminals to ensure firm contact with the base
- Produced by use of surface mount technology
SDD-035 Rev.No:2 MG-9300 Intelligent analogue addressable heat detector S/P 1/2
TECHNICAL SPECIFICATIONS
Operating voltage 18-33V DC
Detection principle Termistör
Quiescent current (max) 450µA
Alarm current (max) 6mA
Remote indicator output (max) 4mA
Indicators 2 transparent LED (red on alarm)
Operating temperature (-10°C)-(+50°C)
Storage temperature (-30°C)-(+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (inc. base) Ø:100 mm, h:50 mm
Weight (inc. base) 135g
Compatible bases MG-3510 detector base
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
Heat class A1R
CONNECTION DIAGRAM
MG Series Intelligent Analogue Addressable Detector Base (MG-3510) Connection Diagram
MG Series Intelligent Analogue Addressable Remote Indicator (MG-4000.A) Connection Diagram
SDD-035 Rev.No:2 MG-9300 Intelligent analogue addressable heat detector S/P 2/2
SALES SUPPORT DOCUMENT
MG-9400
MAVIGARD INTELLIGENT ADDRESSABLE MULTI-SENSOR (PHOTO-ELEC.+HEAT) DETECTOR
MG-9400 Intelligent addressable multisensor
detectors are compatible with MAXLOGIC series
addressable panels. Detector has a photo-electric
smoke detection chamber and a temperature
sensitive thermistor. When the change in
ambient temperature is 30 °C in 1 minute and/or
ambient temperature reaches 60 °C via sensing
with the thermistor and/or analogue values are
generated by beam emitted by transmitter, which
collides smoke particles entering the detection
cell and sensed by the receiver, are interpreted
by electronic circuits and a fire alarm signal is
generated. The detector is suitable for indoor use.
PRODUCT FEATURES
- Compatible with EN 54-5 and EN 57
- Twin fire alarm indicators for 360° viewing
- ‘Soft’ addressable by use of address programmer
- Remote indicator output
- Communication interrupt for fast fire alarm detection in 1.5sec
- Stable sensitivity
- Protection from electromagnetic interference
- Compatible with MG-3510 series mounting base
- Compatible with MG-3530 series mounting base with buzzer
- Compatible with MG-3600 series recessed mounting base
- Compatible with ML-0121 series surface mounting back box
- Microprocessor controlled
- Clamp terminals to ensure firm contact with the base
- Produced by use of surface mount technology
SDD-036 Rev.No:2 MG-9400 Intelligent analogue addressable multi-sensor detector S/P 1/2
TECHNICAL SPECIFICATIONS
Operating voltage 18-33V DC
Detection principle Optical chamber + Thermistor
Quiescent current (max) 600µA
Alarm current (max) 6mA
Remote indicator output (max) 4mA
Indicators 2 transparent LED (red on alarm)
Operating temperature (-10°C)-(+50°C)
Storage temperature (-30°C)-(+60°C)
Relative humidity %95 (+40°C non-condensing)
Dimensions (inc. base) Ø:100 mm, h:50 mm
Weight (inc. base) 143g
Compatible bases MG-3510 detector base
Cable 1x2x0.8+0.8JH(st)H / 1x2x1.5+1.5JH (st)H
Heat class A1R
CONNECTION DIAGRAM
MG Series Intelligent Analogue Addressable Detector Base (MG-3510) Connection Diagram
MG Series Intelligent Analogue Addressable Remote Indicator (MG-4000.A) Connection Diagram
SDD-036 Rev.No:2 MG-9400 Intelligent analogue addressable multi-sensor detector S/P 2/2
