DIVISION

DUST COLLECTORS

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS

DIVISION INTRODUCTION

HENNLICH ENGINEERING is the leading manufacturer of air dust collectors.

We produce low-performance standalone dust collectors for local filtration as well as high-performance
modular dust collectors which can be easily combined to assemblies with the required flowrate.

BENEFITS
• control of dust pollution
• avoidance of penalties imposed by authorities for dust
• JET-PULS recovery system
• residual concentration < 10 mg/m3 (on request < 1 mg/m3)
• unit assembly construction
• easy maintenance & simple operation
• compact design

APPLICATIONS & INDUSTRIES

• storage silos & bunkers
• transfer points of belt conveyors
• mines & quarries
• coal handling
• food industry
• wood processing
• steel & slag
• chemical industry
• welding & grinding
• foundries

OUR CUSTOMERS
● SITA SUEZ ● PKN Orlen ● Ethanol Energy
● ČEZ ● Saint Gobain ● Veolia Group
● Seiko Flowcontrol ● C-Energy ● Irkutskenergo
● Č.O.B. Beňov ● OMYA-Ural ● Novo-Irkutskaya TES
● Carbo Energia ● ACL Technology ● Severozapadnaya fosfornaya kompaniya
● Keramost ● ERMAC ● Kaluzhskii metallurgiceskii zavod
● Dneprostal ● Kazakhmys ● Saicanature
● Target ● Holcim ● Ivano-Frankovskcement
● Lafarge ● Carmeuse ● Morfico

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS

DIVISION

The dust collector is designed with the following parameters:

• requested flow rate and filter area
• dust physical properties (abrasive, corrosive, explosive etc.)
• application type (silo dedusting, local filtration, central dedusting)
• rest dust manipulation method (rotary feeder, dust collection box, back to silo or belt conveyor etc.)
• location (inside, outside) and the construction dimensions
• temperature (ambient, product)

Air
Flow rate (m3/h) Line Type Filter area (m2) Chapter Application
volume

N1000 15,0 1.1. silo dedusting

up to 1 000 N1000 V 15,0 1.2. silo dedusting, local filtration
low N N1000 V/KN 15,0 1.3. silo dedusting, local filtration
N1500 24,0 1.4. silo dedusting
1 000-1 500
N1500 V 24,0 1.5. silo dedusting, local filtration
up to 1 000 P0600 17,8 2.1. silo dedusting, local filtration
1 000-1 800 P1200 35,6 2.2. silo dedusting, local filtration
1 800-2 700 P1500 44,5 2.3. silo dedusting, local filtration
middle P
1 800-2 700 P1500/KR3 44,5 2.5. local filtration
2 700-4 000 P1500/5,5 44,5 2.4. local filtration
2 700-4 000 P1500/KR5,5 44,5 2.6. local filtration
3 800-5 940 M1500-1-18 95,0 3.1. industrial filtration
5 100-8 240 M1500-1-24 118,0 3.2. industrial filtration
6 000-8 400 M2000-1-18 118,0 3.3. industrial filtration
6 000-12 000 M2000-1-24 158,0 3.4. industrial filtration
10 000-15 500 M2000-2-36 236,0 3.5. industrial filtration
high 16 600 M M2000-1-24 158,0 3.6. industrial filtration
13 500-21 000 M2000-2-48 316,0 3.7. industrial filtration
15 000-23 500 M2000-3-54 354,0 3.8. industrial filtration
M2000-3-72 474,0 3.9. industrial filtration
20 000-31 500
M2000-4-72 474,0 3.10. industrial filtration
27 000-42 000 M2000-4-96 632,0 3.11. industrial filtration

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
DIVISION
1.1. TYPE N1000

DESCRIPTION
• silo venting filter N1000 is a cylindrically shaped dust
collector for dedusting of pneumatically filled silos

OPERATION QUALITIES
• flow rate 1000 m3/h
• filter area 15 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 97 kg

DESIGN
• carbon steel pressure resistant body
• dust collector body diameter 600 mm
• filtered air blows away through the hole between casing and
top cover
• filter element: 1x filter cartridge
made of polyester in basic design
diameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery
Silo venting filter N1000 is a cylindrically shaped
dust collector. It is mainly used for dedusting of
BENEFITS pneumatically filled silos.
• robust design
• easy filter element replacement
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
1.1. TYPE N1000
DIVISION

936
1373

16x Ø 9

Ø 596
Ø 650

Ø 680

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
DIVISION
1.2. TYPE N1000 V

DESCRIPTION
• silo venting filter N1000 V is a cylindrically shaped dust
collector for dedusting of silos

OPERATION QUALITIES
• flow rate 1000 m3/h
• filter area 15 m2
• fan 1,5 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 138 kg

DESIGN
• carbon steel pressure resistant body
• dust collector body diameter 600 mm
• filter element: 1x filter cartridge
made of polyester in basic design
diameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

Silo venting filter N1000 V is a cylindrically shaped

BENEFITS dust collector. It is mainly used for dedusting of silos
• robust design and for local filtration.
• easy filter element replacement
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
1.2. TYPE N1000 V
DIVISION

A
1450

16x Ø 9

Ø 596
Ø 650
A
Ø 680

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
DIVISION
1.3. TYPE N1000 V/KN

DESCRIPTION
• silo venting filter N1000 V is a cylindrically shaped dust
collector with dust collection box and support construction
• suitable for local dedusting (for example – big bags, welding
operations etc.)

OPERATION QUALITIES
• flow rate 1000 m3/h
• filter area 15 m2
• fan 1,5 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 206 kg

DESIGN
• carbon steel pressure resistant body
• dust collector body diameter 600 mm
• filter element: 1x filter cartridge
made of polyester in basic design
diameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)
• dust collection box and support construction

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

Silo venting filter N1000 V/KN is a cylindrically

BENEFITS shaped dust collector. It is equipped with the support
• robust design construction and the dust collection box. It is mainly
• easy filter element replacement used for local filtration.
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
1.3. TYPE N1000 V/KN
DIVISION

738,5
1835

O 220
662

385
O 645

A
1413,5
900

770

B B
6
O1

830
900

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
DIVISION
1.4. TYPE N1500

DESCRIPTION
• silo venting filter N1500 is a cylindrically shaped dust
collector for dedusting of pneumatically filled silos

OPERATION QUALITIES
• flow rate 1500 m3/h
• filter area 24 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 132 kg

DESIGN
• carbon steel pressure resistant body
• dust collector body diameter 600 mm
• filtered air blows away through the hole between casing and
top cover
• filter element: 1x filter cartridge
made of polyester in basic design
diameter 325 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

Silo venting filter N1500 is a cylindrically shaped

BENEFITS dust collector. It is mainly used for dedusting of
• robust design pneumatically filled silos.
• easy filter element replacement
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
1.4. TYPE N1500
DIVISION

1260

936
1373
1873
500

A
5
9,

13
Ø

Ø
905
865
840
800
Ø
Ø
Ø
Ø

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
DIVISION
1.5. TYPE N1500 V

DESCRIPTION
• silo venting filter N1500 V is a cylindrically shaped dust
collector for dedusting of silos

OPERATION QUALITIES
• flow rate 1500 m3/h
• filter area 24 m2
• fan 2,2 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 173 kg

DESIGN
• carbon steel pressure resistant body
• dust collector body diameter 600 mm
• filter element: 1x filter cartridge
made of polyester in basic design
diameter 325 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement
• low dust emission level Silo venting filter N1500 V is a cylindrically shaped
• excellent access to every filter component dust collector. It is mainly used for dedusting of silos
• perfect recovery of filter element with built-in JET-PULS system and for local filtration.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
1. SILO VENTING FILTERS (N-SERIES)
1.5. TYPE N1500 V
DIVISION

A
1450

Ø 905
Ø 865
Ø 840
Ø 800

Ø
9,5
13
Ø

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.1. TYPE P0600

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.

OPERATION QUALITIES
• flow rate 1000 m3/h
• filter area 17,8 m2
• fan: 1,5 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 195 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 600 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• electric control box: 3 x 400 VAC, 50 Hz
• dust collection box or rotary feeder with support construction
• noise silencer
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS Dust collector P0600 is a box-shaped device. It is

• robust design used for local filtration - dedusting of storage silos, belt
• easy filter element replacement conveyor transfer points, welding operations etc.
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.1. TYPE P0600
DIVISION

1539,5
807

900
B B

599
750

1109,5

750
690
120 75

817

687
750
690

480

O
9

75 120 480
9

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.2. TYPE P1200

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.

OPERATION QUALITIES
• flow rate 1800 m3/h
• filter area 35,6 m2
• fan: 2,2 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 276 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 1200 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• electric control box: 3 x 400 VAC, 50 Hz
• dust collection box or rotary feeder with support construction
• noise silencer
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement
• low dust emission level
• excellent access to every filter component
• perfect recovery of filter element with built-in JET-PULS system

Dust collector P1200 is a box-shaped device. It is

used for local filtration - dedusting of storage silos, belt
conveyor transfer points, welding operations etc.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.2. TYPE P1200
DIVISION

520
425
B B

75 120 120 120 120 120

8
O
120
120

828
750
690

120
120
75 120

690 1194
750
1539,5
2139,5
600

750

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.3. TYPE P1500

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.

OPERATION QUALITIES
• flow rate 2700 m3/h
• filter area 44,5 m2
• fan: 3,0 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 320 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• electric control box: 3 x 400 VAC, 50 Hz
• dust collection box or rotary feeder with support construction
• noise silencer
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement
• low dust emission level Dust collector P1500 is a box-shaped device. It is
• excellent access to every filter component used for local filtration - dedusting of storage silos,
• perfect recovery of filter element with built-in JET-PULS system belt conveyor transfer points, welding operations etc.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.3. TYPE P1500
DIVISION

520
725
B B

75 120 120 120 120 120

8
O
120
120

828
750
732
690

120
120
75 120

690
732
750
1577
2477
900

750

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.4. TYPE P1500/5,5

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.

OPERATION QUALITIES
• flow rate 4000 m3/h
• filter area 44,5 m2
• fan: 5,5 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 327 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)

ADDITIONAL ACCESSORIES
• electric control box: 3 x 400 VAC, 50 Hz
• dust collection box or rotary feeder with support construction
• noise silencer
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement
• low dust emission level
• excellent access to every filter component Dust collector P1500/5,5 is a box-shaped device.
• perfect recovery of filter element with built-in JET-PULS system It is used for local filtration - dedusting of storage
silos, belt conveyor transfer points, welding
operations etc.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.4. TYPE P1500/5,5
DIVISION

520
725
B B

75 120 120 120 120 120

8
O
120
120

828
750
732
690

120
120
75 120

690
732
750
1577
2477
900

750

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.5. TYPE P1500/KR3

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.
• equipped with dust hopper, support construction and rotary
feeder

OPERATION QUALITIES
• flow rate 2700 m3/h
• filter area 44,5 m2
• fan: 3,0 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 519 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• support construction with dust hopper
• rotary feeder 250 x 250, 0.55 kW
• electric control box: 3 x 400 VAC, 50 Hz

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement Dust collector P1500/KR3 is a box-shaped device. It is
• low dust emission level used for local filtration - dedusting of storage silos, belt
• excellent access to every filter component conveyor transfer points, welding operations etc. It is
• perfect recovery of filter element with built-in JET-PULS system equipped with the support construction, dust hopper
and rotary feeder.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.5. TYPE P1500/KR3
DIVISION

807
1670,5
599

C C

B B

A
1083
O 275
200
1083

1577
807

900
3560

2029
630
1416

6
200
166

300
233

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
DIVISION
2.6. P1500/KR5,5

DESCRIPTION
• box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines
etc.
• equipped with dust hopper, support construction and rotary
feeder

OPERATION QUALITIES
• flow rate 4000 m3/h
• filter area 44,5 m2
• fan: 5,5 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6 Nm3/h
• pressure loss 1500 Pa
• weight: 549 kg

DESIGN
• carbon steel pressure resistant body
• filter element: 9x filter cartridge
made of polyester in basic design
diameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• support construction with dust hopper
• rotary feeder 250 x 250, 0.55 kW
• electric control box: 3 x 400 VAC, 50 Hz

ADDITIONAL ACCESSORIES
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
• available also with mechanical filter cartridge recovery

BENEFITS
• robust design
• easy filter element replacement
• low dust emission level Dust collector P1500/KR5,5 is a box-shaped device.
• excellent access to every filter component It is used for local filtration - dedusting of storage
• perfect recovery of filter element with built-in JET-PULS system silos, belt conveyor transfer points, welding operations
etc. It is equipped with the support construction, dust
hopper and rotary feeder.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
2. LOCAL DUST COLLECTORS (P-SERIES)
2.6. P1500/KR5,5
DIVISION

807
1670,5
599

C C

B B

A
1083
O 275
200
1083

1577
807

900
3560

2029
630
1416

6
200
166

300
233

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.1. TYPE M1500-1-18

DESCRIPTION
• one-box shaped dust collector for local or central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 3 800 - 5 940 m3/h
• filter area 89 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6-8 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 1x filter box made of carbon steel
• damping chamber to reduce the noise from the fan
• filter element: 18x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction

ADDITIONAL ACCESSORIES
• rotary feeder or dust collection box
• service platform for easy maintenance Dust collector M1500-1-18 is a one box-shaped
• ATEX, food or chemical industry design device. It is used for local or central filtration in various
• non-standard temperature design -40 °C / +150 °C industrial areas with non-stop operation. It is equipped
with the built-in fan and dust hopper with support
construction.
Fan
Flow rate Fan Filter surface
underpressure
(m3/h) (kW) load (m3/m2/min)
(Pa)
3 800 5,5 3 950 0,90
3 800-4 800 7,5 3 950 1,12
4 800-5 940 9,2 4 200 1,39

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.1. TYPE M1500-1-18
DIVISION

2 970

1 500
5 488
4 647
2 297

2 297
1 942

800

780 530

2 970
250

18
370

112
1 358

335

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.2. TYPE M1500-1-24

DESCRIPTION
• one-box shaped dust collector for local or central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 5 100 - 8 240 m3/h
• filter area 118 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6-8 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 1x filter box made of carbon steel
• damping chamber to reduce the noise from the fan
• filter element: 24x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (4 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction

ADDITIONAL ACCESSORIES Dust collector M1500-1-24 is a one box-shaped

• rotary feeder or dust collection box device. It is used for local or central filtration in various
• service platform for easy maintenance industrial areas with non-stop operation. It is equipped
• ATEX, food or chemical industry design with the built-in fan and dust hopper with support
• non-standard temperature design -40 °C / +150 °C construction.

Fan Filter surface

Flow rate
Fan (kW) underpressure load
(m3/h)
(Pa) (m3/m2/min)

5 100 11,0 4 100 0,72

5 100-6 000 11,0 4 000 0,85
6 000-6 720 15,0 4 300 0,95
6 720-8 240 15,0 4 150 1,16

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.2. TYPE M1500-1-24
DIVISION

2 970

1 500
5 488
4 647
2 297

2 297
1 942

800

780 530

2 970
250

18
370

112
1 358

335

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.3. TYPE M2000-1-18

DESCRIPTION
• one-box shaped dust collector for local or central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 6 000 - 8 400 m3/h
• filter area 118 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6-8 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 1x filter box made of carbon steel
• damping chamber to reduce the noise from the fan
• filter element: 18x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve(3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicatethe filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction

ADDITIONAL ACCESSORIES
• rotary feeder or dust collection box
• service platform for easy maintenance
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C
Dust collector M1500-1-18 is a one box-shaped
device. It is used for local or central filtration in various
industrial areas with non-stop operation. It is equipped
Flow rate Fan Fan underpressure Filter surface with the built-in fan and dust hopper with support
(m3/h) (kW) (Pa) load (m3/m2/min) construction.

6 000-7 500 11,0 4000-3750 0,85-1,06

7 500-8 400 15,0 4250-4150 1,06-1,19
7 500-8 400 18,5 4950-4900 1,06-1,19

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.3. TYPE M2000-1-18
DIVISION

2083,5

1256

O 10
O 315
O 355
5076

1929
4236

10
O
O 309
O 355
O 386

1421,5
1386
1031

A A
413

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.4. TYPE M2000-1-24

DESCRIPTION
• one-box shaped dust collector for local or central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 6 000 - 12 000 m3/h
• filter area 158 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 6-8 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 1x filter box made of carbon steel
• damping chamber to reduce the noise from the fan
• filter element: 24x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve(4 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicatethe filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction

ADDITIONAL ACCESSORIES
• rotary feeder or dust collection box
• service platform for easy maintenance
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C Dust collector M1500-1-24 is a one box-shaped
device. It is used for local or central filtration in various
industrial areas with non-stop operation. It is equipped
Flow rate Fan Fan underpressure Filter surface with the built-in fan and dust hopper with support
(m3/h) (kW) (Pa) load (m3/m2/min) construction.

6 000-7 500 11,0 4 000-3 750 0,63-0,79

7 500-9 600 15,0 4 250-3 950 0,79-1,01
7 500-12 000 18,5 4 950-4 350 0,79-1,26

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.4. TYPE M1500-1-24
DIVISION

2083,5

1256

O 10
O 315
O 355
5076

1929
4236

10
O
O 309
O 355
O 386

1421,5
1386
1031

A A
413

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.5. TYPE M2000-2-36

DESCRIPTION
• two-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 10 000 - 15 500 m3/h
• filter area 236 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 8-10 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 2x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 36x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (6 pcs), safety valve (2 pcs), pressure
regulator (2 pcs)
• pressure air connection: internal thread G ½“
• 2x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included

Dust collector M2000-2-36 is a two box-shaped

ADDITIONAL ACCESSORIES device. It is used for central filtration in various
• rotary feeder or dust collection box industrial areas with non-stop operation. It is equipped
• service platform for easy maintenance with the standalone fan and dust hoppers with support
• ATEX, food or chemical industry design construction.
• non-standard temperature design -40 °C / +150 °C

Fan
Fan Filter surface
Flow rate (m3/h) underpressure
(kW) load (m3/m2/min)
(Pa)
10 000 15,0 3 700 0,71
10 000-12 500 18,5 4 100 0,88
12 500-15 500 22,0 4 000 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.5. TYPE M2000-2-36
DIVISION

2 456
2 644
5 506

5 506
2 862

1 366
1 000

800
1 000
166

1 200

1080 62 1025
1 897
1320

2 456

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.6. TYPE M2000-1-24

DESCRIPTION
• one-box shaped dust collector for local or central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 16 600 m3/h
• filter area 158 m2
• fan 37 kW
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 8-12 Nm3/h
• pressure loss 2000 Pa

DESIGN
• 1x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 24x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (4 pcs), safety valve (1 pc), pressure
regulator (1 pc)
• pressure air connection: internal thread G ½“
• pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• dust collection box
• piping to the fan included

ADDITIONAL ACCESSORIES Dust collector M2000-1-24 is a one box-shaped

• service platform for easy maintenance device. It is used for local or central filtration in various
• ATEX, food or chemical industry design industrial areas with non-stop operation. It is equipped
• non-standard temperature design -40 °C / +150 °C with the standalone 37 kW fan, hopper with support
construction and dust collection box.

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.6. TYPE M2000-1-24
DIVISION

3241

2825
1500 O
50
6

1256
780
2089,3
30
30
2632,5

1386
1105

413

812 A A
12
Ø

1700 22
30°
Ø 595
Ø 560
Ø 500

1560 Ø
140
1929

140
4073,5

1060
1200

C
B
C

1700
Ø
25
1961

Ø
12
1421,5

30°

Ø 630
Ø 690
Ø 725
1057

702

852

B 150
150

1750
805 1061

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.7. TYPE M2000-2-48

DESCRIPTION
• two-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 13 500 - 21 000 m3/h
• filter area 316 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 8-10 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 2x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 48x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (8 pcs), safety valve (2 pcs), pressure
regulator (2 pcs)
• pressure air connection: internal thread G ½“
• 2x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included

ADDITIONAL ACCESSORIES
• rotary feeder or dust collection box
• service platform for easy maintenance
• ATEX, food or chemical industry design
Dust collector M2000-2-48 is a two box-shaped
• non-standard temperature design -40 °C / +150 °C
device. It is used for central filtration in various
industrial areas with non-stop operation. It is equipped
Fan with the standalone fan and dust hoppers with support
Fan Filter surface
Flow rate (m3/h) underpressure construction.
(kW) load (m3/m2/min)
(Pa)
13 500 18,5 3 900 0,71
13 500-17 000 30,0 4 600 0,90
17 000-21 000 37,0 4 600 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.7. TYPE M2000-2-48
DIVISION

2 456
2 644
5 506

5 506
2 862

1 366
1 000

800
1 000
166

1 200

1080 62 1025
1 897
1320

2 456

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.8. TYPE M2000-3-54

DESCRIPTION
• three-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 15 000 - 23 500 m3/h
• filter area 354 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 10-12 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 3x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 54x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (9 pcs), safety valve (3 pcs), pressure
regulator (3 pcs)
• pressure air connection: internal thread G ½“
• 3x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included

ADDITIONAL ACCESSORIES
• rotary feeder or dust collection box Dust collector M2000-3-54 is a three box-shaped
• service platform for easy maintenance device. It is used for central filtration in various
• ATEX, food or chemical industry design industrial areas with non-stop operation. It is equipped
• non-standard temperature design -40 °C / +150 °C with the standalone fan and dust hoppers with support
construction.
Fan
Flow rate Fan Filter surface
underpressure
(m3/h) (kW) load (m3/m2/min)
(Pa)
15 000 22,0 3 900 0,71
15 000-20 000 30,0 3 700 0,94
20 000-23 500 37,0 4 000 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.8. TYPE M2000-3-54
DIVISION

3 656
2 644
5 506

5 506
2 862

1 366
1 000

800
1 000
166

1 200

1080 62 1025
1 897
1320

3 656

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.9. TYPE M2000-3-72

DESCRIPTION
• three-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 20 000 - 31 500 m3/h
• filter area 474 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 10-12 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 3x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 72x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (12 pcs), safety valve (3 pcs), pressure
regulator (3 pcs)
• pressure air connection: internal thread G ½“
• 3x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included

ADDITIONAL ACCESSORIES Dust collector M2000-3-72 is a three box-shaped

• rotary feeder or dust collection box device. It is used for central filtration in various
• service platform for easy maintenance industrial areas with non-stop operation. It is equipped
• ATEX, food or chemical industry design with the standalone fan and dust hoppers with support
• non-standard temperature design -40 °C / +150 °C construction.

Fan Filter surface

Fan
Flow rate (m3/h) underpressure load (m3/m2/
(kW)
(Pa) min)
20 000 37,0 4 500 0,70
20 000-26 000 45,0 4 500 0,91
26 000-31 500 55,0 4 600 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.9. TYPE M2000-3-72
DIVISION

3 656
2 644
5 506

5 506
2 862

1 366
1 000

800
1 000
166

1 200

1080 62 1025
1 897
1320

3 656

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.10. TYPE M2000-4-72

DESCRIPTION
• four-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 20 000 - 31 500 m3/h
• filter area 474 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 14-16 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 4x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 72x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (12 pcs), safety valve (4 pcs), pressure
regulator (4 pcs)
• pressure air connection: internal thread G ½“
• 4x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included Dust collector M2000-4-72 is a four box-shaped
device. It is used for central filtration in various
industrial areas with non-stop operation. It is equipped
ADDITIONAL ACCESSORIES with the standalone fan and dust hoppers with support
• rotary feeder or dust collection box construction.
• service platform for easy maintenance
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C

Fan
Flow rate Fan Filter surface load
underpressure
(m3/h) (kW) (m3/m2/min)
(Pa)
20 000 37,0 4 500 0,71
20 000-26 000 45,0 4 500 0,91
26 000-31 500 55,0 4 600 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.10. TYPE M2000-4-72
DIVISION

2375.00
1183.00
963.00

310.00 1400.00 1400.00 1400.00

1135.00
5355.00

2680.00
300.00

2267.00
1183.00

A A

2400.00
700.00 1400.00 1400.00 1400.00 705.00

9023.00

143.502x160= 320.00
3014.24
C
20.00
4x160= 640.00

510.00

450.00
O 487
815.00

12x 27.50
87.50

24.00
20.00
607.00

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
DIVISION
3.11. TYPE M2000-4-96

DESCRIPTION
• four-box shaped dust collector for central filtration
• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and
food industry etc.)

OPERATION QUALITIES
• flow rate 27 000 - 42 000 m3/h
• filter area 632 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C
• compressed air needed 6 bar, consumption 14-16 Nm3/h
• pressure loss 1500 Pa

DESIGN
• 4x filter box made of carbon steel
• standalone fan with vibration joints and dampers
• filter element: 96x filter cartridge
made of polyester in basic design
diameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer
• electromagnetic valve (16 pcs), safety valve (4 pcs), pressure
regulator (4 pcs)
• pressure air connection: internal thread G ½“
• 4x pressure switch to indicate the filter cartridges are plugged
• electric control box: 3 x 400 VAC, 50 Hz
• dust hopper with support construction
• piping to the fan included Dust collector M2000-4-96 is a four box-shaped
device. It is used for central filtration in various
industrial areas with non-stop operation. It is equipped
ADDITIONAL ACCESSORIES with the standalone fan and dust hoppers with support
• rotary feeder or dust collection box construction.
• service platform for easy maintenance
• ATEX, food or chemical industry design
• non-standard temperature design -40 °C / +150 °C

Fan Filter surface

Fan
Flow rate (m3/h) underpressure load (m3/m2/
(kW)
(Pa) min)
27 000 45,0 4 200 0,70
27 000-34 000 55,0 3 600 0,90
34 000-42 000 75,0 3 600 1,10

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz
 DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES)
3.11. TYPE M2000-4-96
DIVISION

2375.00
1183.00
963.00

310.00 1400.00 1400.00 1400.00

1135.00
5355.00

2680.00
300.00

2267.00
1183.00

A A

2400.00
700.00 1400.00 1400.00 1400.00 705.00

9023.00

143.502x160= 320.00
3014.24
C
20.00
4x160= 640.00

510.00

450.00
O 487
815.00

12x 27.50
87.50

24.00
20.00
607.00

DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich.cz