The Driving Force Of Any Machines

1
General Introduction
AERO Electric Motors are defined as totally enclosed, fan cooled, squirrel cage type and noted for their novel design,
beautiful model, compact structured, low noice, high efficiency, large torque, excellent starting performance, easy serving, low
energy consumption also benefits the environment. The motors are adopted with F class insulation and designed with assessing
method for insulation system according to international practice, it enhances greatly have reached an international advanced level
of the same kind of products at the initial days of the 90’s.

AERO Electric Motors can be widely used as driving equipments of various machineries, such as machine tools,
blowers, pumps, compressors, transporters, agricultural and food processing. Pedestal installation size and centre height and
other index of the motor completely measured.

General Specification
 IP 55 as minimum – higher ratings are available on request.
 Cooling Method: IC411
 Standard motors are rated for continuous duty at full nameplate rating – S1.
 These motors are designed for operation in high ambient temperature of 40 oC or more. The standards data relates to ambient
up to 40oC and attitudes below 1000 meters.
 Standard motors have class F (100oC) insulation, with a class B (80oC) temperature rise. Only high quality polyester covered
copper winding wire is used in conjunction with inorganic high temperature polyester varnish. Motors with class H (125 oC)
insulation are available on request.
 Stator and rotor laminations are produced from low loss, double insulated, and silicon electrical steel.
 All motors are designated for high efficiency and low temperature rise giving a long economical service life.
 High quality bearings are used on AERO Electric Motors. In general the bearings have C3 clearances and are preloaded with a
wave washer on the drive and which increases bearing life and reduces bearing noise.
 Standard noise levels (sound pressure at 1 meter) are well within the requirements of most standards, and are generally below
80dB (A) for small motors and 85 dB (A) for large motors.
 Shaft s are made from high quality carbon steel
 Stator frames are made of HT200 cast iron.
 Fans are made from glass reinforced polypropylene for small motors up to 280 frame size.

Mounting Arrangement

2
Degree of Protection
Designation First Numeral Second Numeral

Protection agains contact and ingress of foreign bodies. Protection Against water.
Protection against contact hazardous “Live” parts and
moving mechanical parts.

5. Ingress of dust is not totally prevented, but dust shall not 5. Water projected in jets against the
interfere with the satisfactory operation of equipment. A enclosure from any direction will have
probe of 1 mm diameter shall not penetrate the enclosure. no harmful effects.

6. No Ingress of dust. 6. Water projected in power jets shall

have no harmful effects.
IP55 Dust protected Jetting water
IP56 Dust protected Powerful jetting
IP65 Dust tight Jetting water
IP66 Dust tight Powerful jetting

Diagram Connections

Bearing Size
Frame Size Poles Drive end International Size Non—Drive End International type
56 2-4 6201ZZ 6201ZZ
63 2-4 6201ZZ 6201ZZ
71 2-4 6202ZZ 6202ZZ
80 2-4 6204ZZ 6204ZZ
90 2-4 6205ZZ 6205ZZ
100 2-4 6206ZZ 6206ZZ
112 2-4 6306ZZ 6306ZZ
132 2-4 6308ZZ 6308ZZ
160 2-4 6309 6309
180 2-4 6311 6311
200 2-4 6312 6312
225 2-4 6313 6313
250 2-4 6314 6314
2 6314 6314
280
4-8 6317 6317
2 6317 6317
315
4-8 NU319 6319
2 6319 6319
355
4-8 NU322 6322

3
Performance Data
Power Current at (A) EFF. P.F LRT LRA BDT Noise Weight J
2 pole

Type RPM
HP KW 380V 400V 415V % cos f RLT RLA RLT LwdB(A) kg kgm2
AE63M1-2 0.25 0.18 0.53 0.5 0.49 2720 65.00 0.80 2.3 5.5 2.3 61 4.5 0.00031
AE63M2-2 0.33 0.25 0.69 0.65 0.63 2720 68.00 0.81 2.3 5.5 2.3 61 5 0.0006
AE71M1-2 0.50 0.37 1.01 0.96 0.92 2755 69.00 0.81 2.2 6.1 2.3 64 6 0.00075
AE71M2-2 0.75 0.55 1.38 1.3 1.26 2790 74.00 0.82 2.3 6.1 2.3 64 9 0.0009
AE80M1-2 1 0.75 1.77 1.67 1.6 2845 75.00 0.83 2.3 6.1 2.2 67 10 0.0012
AE80M2-2 1.5 1.1 2.61 2.34 2.24 2835 76.20 0.84 2.3 6.9 2.2 67 11.8 0.0014
AE90S-2 2 1.5 3.46 3.29 3.15 2850 78.50 0.84 2.3 7.0 2.2 72 14.5 0.0029
AE90L-2 3 2.2 4.85 4.6 4.4 2855 81.00 0.85 2.3 7.0 2.2 72 16.6 0.0055
AE100L-2 4 3.0 6.34 6.02 5.77 2860 82.60 0.87 2.3 7.5 2.2 76 24 0.0109
AE112M-2 5.5 4.0 8.2 7.8 7.46 2880 84.20 0.88 2.3 7.5 2.2 77 29 0.0126
AE132S1-2 7.5 5.5 11.1 10.5 10.1 2900 85.70 0.88 2.3 7.5 2.2 80 40 0.0377
AE132S2-2 10 7.5 14.9 14.15 13.56 2900 87.00 0.88 2.3 7.5 2.2 80 43 0.0499
AE160M1-2 15 11.0 21.3 20.2 19.4 2930 88.4 0.89 2.2 7.5 2.3 86 107 0.03770
AE160M2-2 20 15.0 28.8 27.4 26.2 2930 89.4 0.89 2.2 7.5 2.3 86 114 0.04990
AE160L-2 25 18.5 34.7 32.97 31.6 2930 90.0 0.90 2.2 7.5 2.3 86 133 0.05500
AE180M-2 30 22 41 39.0 37.6 2940 90.5 0.90 2.0 7.5 2.3 89 165 0.07500
AE200L1-2 40 30 55.4 52.6 50.7 2950 91.4 0.90 2.0 7.5 2.3 92 218 0.12400
AE200L2-2 50 37 67.9 64.5 62.2 2950 92.0 0.90 2.0 7.5 2.3 92 230 0.13900
AE225M-2 60 45 82.1 78.0 75.2 2960 92.5 0.90 2.0 7.5 2.3 92 290 0.23300
AE250M-2 75 55 100 94.8 91.4 2970 93.0 0.90 2.0 7.5 2.3 93 359 0.31200
AE280S-2 100 75 135 129 124 2975 93.6 0.90 2.0 7.0 2.3 94 475 0.57900
AE280M-2 125 90 160 152 147 2975 93.9 0.91 2.0 7.1 2.3 94 510 0.67500
AE315S-2 150 110 195 186 179 2975 94.0 0.91 1.8 7.1 2.2 96 875 1.18000
AE315M-2 175 132 233 222 214 2975 94.5 0.91 1.8 7.1 2.2 96 963 1.82000
AE315L1-2 220 160 279 265 256 2975 94.6 0.92 1.8 7.1 2.2 99 1010 2.08000
AE315L2-2 270 200 348 331 319 2975 94.8 0.92 1.8 7.1 2.2 99 1138 2.38000
AE355M-2 335 250 433 412 397 2980 95.2 0.92 1.6 7.1 2.2 103 1900 3.00000
AE355L-2 420 315 545 518 499 2980 95.4 0.92 1.6 7.1 2.2 103 2300 3.50000
4 pole

Power Current at (A) EFF. P.F LRT LRA BDT Noise Weight J
Type RPM
HP KW 380V 400V 415V % cos f RLT RLA RLT LwdB(A) kg kgm2
AE63M2-4 0.25 0.18 0.62 0.59 0.56 1310 60.00 0.73 2.2 4.4 2.1 52 4.5 0.0006
AE71M1-4 0.33 0.25 0.79 0.75 0.72 1345 65.00 0.74 2.2 5.2 2.1 55 5 0.0008
AE71M2-4 0.50 0.37 1.12 1.1 1.0 1340 67.00 0.75 2.2 5.2 2.1 55 6.3 0.0013
AE80M1-4 0.75 0.55 1.52 1.44 1.38 1390 71.00 0.75 2.3 5.2 2.4 58 9 0.0018
AE80M2-4 1 0.75 1.95 1.85 1.77 1380 73.00 0.76 2.3 6.0 2.3 58 10 0.0021
AE90S-4 1.5 1.1 2.85 2.7 2.6 1390 76.20 0.77 2.3 6.0 2.3 61 12 0.0023
AE90L-4 2 1.5 3.72 3.53 3.39 1400 78.50 0.78 2.3 6.0 2.3 61 14 0.0027
AE100L1-4 3 2.2 5.09 4.83 4.6 1420 81.00 0.81 2.3 7.0 2.3 64 23 0.0054
AE100L2-4 4 3.0 6.78 6.4 6.17 1410 82.60 0.82 2.3 7.0 2.3 64 25 0.0067
AE112M-4 5.5 4.0 8.8 8.36 8.0 1435 84.20 0.82 2.3 7.0 2.3 65 29 0.0095
AE132S-4 7.5 5.5 11.7 11.12 10.65 1440 85.70 0.83 2.3 7.0 2.3 71 46 0.0214
AE132M-4 10 7.5 15.6 14.8 14.2 1450 87.00 0.84 2.3 7.0 2.3 71 55 0.0296
AE160M-4 15 11.0 22.3 21.2 20.3 1460 88.40 0.84 2.2 7.0 2.3 75 110 0.0747
AE160L-4 20 15.0 30.1 28.6 27.4 1460 89.40 0.85 2.2 7.5 2.3 75 129 0.0918
AE180M-4 25 18.5 36.3 34.5 33.3 1470 90.00 0.86 2.2 7.5 2.3 76 160 0.13900
AE180L-4 30 22 43.2 40.8 39.3 1470 90.50 0.86 2.2 7.5 2.3 76 178 0.15800
AE200L-4 40 30 57.6 55.1 53.1 1470 91.40 0.86 2.2 7.2 2.3 79 228 0.26200
AE225S-4 50 37 70.2 66.7 64.3 1475 92.00 0.87 2.2 7.2 2.3 81 288 0.40600
AE225M-4 60 45 84.9 80.7 77.8 1475 92.50 0.87 2.2 7.2 2.3 81 313 0.46900
AE250M-4 75 55 103 98.1 94.6 1480 93.00 0.87 2.2 7.2 2.3 83 376 0.66000
AE280S-4 100 75 138.3 131 127 1480 93.60 0.88 2.2 6.8 2.3 86 508 1.12000
AE280M-4 125 90 165 157 152 1480 93.90 0.88 2.2 6.8 2.3 86 581 1.64000
AE315S-4 150 110 201 191 184 1480 94.50 0.88 2.1 6.9 2.2 93 846 3.10000
AE315M-4 175 132 240 228 220 1480 94.80 0.88 2.1 6.9 2.2 93 940 3.62000
AE315L1-4 220 160 288 273 264 1480 94.90 0.89 2.1 6.9 2.2 97 1044 4.13000
AE315L2-4 270 200 360 342 329 1480 94.90 0.89 2.1 6.9 2.2 97 1162 4.73000
AE355M-4 335 250 443 421 406 1490 95.20 0.90 2.1 6.9 2.2 101 1700 6.50000
AE355L-4 420 315 559 531 511 1490 95.20 0.90 2.1 6.9 2.2 101 1900 8.20000

4
Performance Data
Power Current at (A) EFF. P.F LRT LRA BDT Noise Weight J
6 pole

Type RPM
HP KW 380V 400V 415V % cos f RLT RLA RLT LwdB(A) kg kgm2
AE71M1-6 0.25 0.18 0.74 0.7 0.67 870 56.00 0.66 2.0 4.0 1.9 52 6 0.0011
AE71M2-6 0.33 0.25 0.95 0.9 0.86 870 59.00 0.68 2.0 4.0 1.9 52 6.5 0.0014
AE80M1-6 0.50 0.37 1.23 1.17 1.12 880 62.00 0.70 2.0 4.7 1.9 54 10 0.0016
AE80M2-6 0.75 0.55 1.7 1.6 1.55 880 65.00 0.72 2.1 4.7 1.9 54 12 0.0019
AE90S-6 1 0.75 2.29 2.18 2.08 905 69.00 0.72 2.1 5.3 2.0 57 13 0.0029
AE90L-6 1.5 1.1 3.18 3.02 2.9 905 72.00 0.73 2.1 5.5 2.0 57 14 0.0035
AE100L1-6 2 1.5 4.0 3.8 3.64 920 76.00 0.76 2.1 5.5 2.0 61 23 0.0069
AE112M-6 3 2.2 5.6 5.32 5.1 935 79.00 0.76 2.1 6.5 2.0 65 28 0.014
AE132S-6 4 3.0 7.4 7.03 6.73 960 81.00 0.76 2.1 6.5 2.1 69 38 0.0286
AE132M1-6 5.5 4.0 9.5 9.03 8.65 960 82.00 0.76 2.1 6.5 2.1 69 50 0.0357
AE132M2-6 7.5 5.5 12.6 11.97 11.46 960 84.00 0.77 2.1 6.5 2.1 69 57 0.0449
AE160M-6 10 7.5 16.9 16.1 15.6 970 86 0.77 2.0 6.5 2.1 73 118 0.08100
AE160L-6 15 11.0 24.2 22.99 22.02 980 87.5 0.78 2.0 6.5 2.1 73 122 0.11600
AE180L-6 20 15.0 31.6 30.0 28.9 980 89 0.81 2.0 7.0 2.1 73 167 0.20700
AE200L1-6 25 18.5 38.6 36.6 35.3 980 90 0.81 2.1 7.0 2.1 76 236 0.31500
AE200L2-6 30 22 44.7 42.5 41.0 980 90 0.83 2.0 7.0 2.1 76 247 0.36000
AE225M-6 40 30 59.3 56.3 54.3 980 91.5 0.84 2.0 7.0 2.1 76 287 0.54700
AE250M-6 50 37 71 67.5 65.1 980 92 0.86 2.1 7.0 2.1 78 355 0.84300
AE280S-6 60 45 86 81.7 78.7 980 92.5 0.86 2.1 7.0 2.0 80 444 1.39000
AE280M-6 75 55 104 99.5 95.9 980 92.8 0.86 2.1 7.0 2.0 80 498 1.65000
AE315S-6 100 75 142 135 130 985 92.5 0.86 2.0 6.7 2.0 85 859 4.11000
AE315M-6 125 90 169 161 155 985 93.5 0.86 2.0 6.7 2.0 85 950 4.78000
AE315L1-6 150 110 207 196 189 985 94 0.86 2.0 6.7 2.0 85 1031 5.45000
AE315L2-6 175 132 245 232 224 985 94.2 0.87 2.0 6.7 2.0 85 1107 6.12000
AE355M1-6 220 160 292 278 268 990 94.5 0.88 1.9 6.7 2.0 92 1550 9.50000
AE355M2-6 270 200 365 347 335 990 94.5 0.88 1.9 6.7 2.0 92 1600 10.40000
AE355L-6 335 250 457 434 418 990 94.5 0.88 1.9 6.7 2.0 92 1700 12.40000
8 pole

Power Current at (A) EFF. P.F LRT LRA BDT Noise Weight J
Type RPM
HP KW 380V 400V 415V % cos f RLT RLA RLT LwdB(A) kg kgm2
AE80M1-8 0.25 0.18 0.83 0.79 0.75 645 51.00 0.61 1.9 3.3 1.8 52 11 0.0025
AE80M2-8 0.33 0.25 1.1 1.05 1.0 645 54.00 0.61 1.9 3.3 1.8 52 12.5 0.003
AE90S-8 0.50 0.37 1.49 1.4 1.36 675 62.00 0.61 1.9 4.0 1.8 56 14 0.0051
AE90L-8 0.75 0.55 2.17 2.08 2.0 680 63.00 0.61 2.0 4.0 1.8 56 16 0.0065
AE100L1-8 1 0.75 2.43 2.3 2.2 680 70.00 0.67 2.0 4.0 1.8 59 24 0.0095
AE100L2-8 1.5 1.1 3.36 3.2 3.06 680 72.00 0.69 2.0 5.0 1.8 59 26 0.011
AE112M-8 2 1.5 4.4 4.22 4.04 690 74.00 0.70 2.0 5.0 1.8 61 30 0.0245
AE132S-8 3 2.2 6.0 5.7 5.46 710 79.00 0.71 2.0 6.0 1.8 64 51 0.0314
AE132M-8 4 3.0 7.8 7.4 7.1 710 80.00 0.73 2.0 6.0 1.8 64 59 0.0395
AE160M1-8 5.5 4.0 10.3 9.78 9.37 720 81.00 0.73 1.9 6.0 2.0 68 105 0.07530
AE160M2-8 7.5 5.5 13.6 12.9 12.38 720 83.00 0.74 1.9 6.0 2.0 68 115 0.09310
AE160L-8 10 7.5 17.8 16.9 16.3 720 85.50 0.75 1.9 6.0 2.0 68 145 0.12600
AE180L-8 15 11.0 25.5 24.2 23.3 730 87.50 0.75 2.0 6.5 2.0 70 169 0.20300
AE200L-8 20 15.0 34.1 32.4 31.2 730 88.00 0.76 2.0 6.6 2.0 73 236 0.33900
AE225S-8 25 18.5 41.1 39.0 37.6 730 90.00 0.76 1.9 6.6 2.0 73 274 0.49100
AE225M-8 30 22 48.9 45.0 43.4 730 90.50 0.78 1.9 6.6 2.0 73 290 0.54700
AE250M-8 40 30 63 60.2 58.1 735 91.00 0.79 1.9 6.5 2.0 75 370 0.83400
AE280S-8 50 37 78 73.9 71.2 740 91.50 0.79 1.9 6.6 2.0 76 488 1.65000
AE280M-8 60 45 94 89.4 86.1 740 92.00 0.79 1.9 6.6 2.0 76 563 1.93000
AE315S-8 75 55 111 106 102 735 92.80 0.81 1.8 6.6 2.0 82 852 4.79000
AE315M-8 100 75 150 143 138 735 93.50 0.81 1.8 6.2 2.0 82 933 5.58000
AE315L1-8 125 90 178 169 163 735 93.80 0.82 1.8 6.4 2.0 82 1027 6.37000
AE315L2-8 150 110 217 206 199 735 94.00 0.82 1.8 6.4 2.0 82 1117 7.23000
AE355M1-8 175 132 261 248 239 740 93.70 0.82 1.8 6.4 2.0 90 2000 7.90000
AE355M2-8 220 160 315 299 288 740 94.20 0.82 1.8 6.4 2.0 90 2150 10.30000
AE355L-8 270 200 387 368 355 740 94.50 0.83 1.8 6.4 2.0 90 2250 12.30000

5
DIMENSION DRAWING FOOT MOUNTING (B3)

Frame
POLES A AA AB AC B BB C D DH E F G H HA HD K L
Size
63M 2, 4 100 30 135 130 80 125 40 11 M4X12 23 4 8.5 63 7 180 7 230
71M 2, 4, 6 112 32 150 145 90 128 45 14 M5X12 30 5 11 71 8 195 7 255
80M 2, 4, 6, 8 125 34 165 175 100 130 50 19 M6X16 40 6 15.5 80 10 220 10 295
90S 2, 4, 6, 8 140 36 180 195 100 135 56 24 M8X19 50 8 20 90 12.5 250 10 320
90L 2, 4, 6, 8 140 36 180 195 125 160 56 24 M8X19 50 8 20 90 12.5 250 10 345
100L 2, 4, 6, 8 160 40 205 215 140 182 63 28 M10X22 60 8 24 100 14 270 12 385
112M 2, 4, 6, 8 190 45 230 240 140 195 70 28 M10X22 60 8 24 112 14 300 12 400
132S 2, 4, 6, 8 216 52 270 275 140 205 89 38 M12X28 80 10 33 132 16 345 12 470
132M 2, 4, 6, 8 216 52 270 275 178 245 89 38 M12X28 80 10 33 132 16 345 12 510
160M 2, 4, 6, 8 254 65 320 330 210 260 108 42 M16X36 110 12 37 160 19 420 15 615
160L 2, 4, 6, 8 254 65 320 330 254 305 108 42 M16X36 110 12 37 160 19 420 15 660
180M 2, 4, 6, 8 279 74 355 380 241 297 121 48 M16X36 110 14 42.5 180 22 455 15 700
180L 2, 4, 6, 8 279 74 355 380 279 327 121 48 M16X36 110 14 42.5 180 22 455 15 740
200L 2, 4, 6, 8 318 75 395 420 305 370 133 55 M20X42 110 16 49 200 25 505 19 770
225S 4, 6, 8 356 75 435 470 286 355 149 60 M20X42 140 18 53 225 28 560 19 815
2 356 75 435 470 311 380 149 55 M20X42 110 16 49 225 28 560 19 820
225M
4, 6, 8 356 75 435 470 311 380 149 60 M20X42 140 18 53 225 28 560 19 845
2 406 88 490 510 349 440 168 60 M20X42 140 18 53 250 33 615 24 920
250M
4, 6, 8 406 88 490 510 349 440 168 65 M20X42 140 18 58 250 33 615 24 920
2 457 103 550 580 368 495 190 65 M20X42 140 18 58 280 35 680 24 995
280S
4, 6, 8 457 103 550 580 368 495 190 75 M20X42 140 20 67.5 280 35 680 24 995
2 457 103 550 580 419 535 190 65 M20X42 140 18 58 280 35 680 24 1045
280M
4, 6, 8 457 103 550 580 419 535 190 75 M20X42 140 20 67.5 280 35 680 24 1045
2 508 120 635 645 406 515 216 65 M20X42 140 18 58 315 45 845 28 1185
315S
4, 6, 8 508 120 635 645 406 515 216 80 M20X42 170 22 71 315 45 845 28 1220
2 508 120 635 645 457 625 216 65 M20X42 140 18 58 315 45 845 28 1290
315M
4, 6, 8 508 120 635 645 457 625 216 80 M20X42 170 22 71 315 45 845 28 1325
2 508 120 635 645 508 625 216 65 M20X42 140 18 58 315 45 845 28 1290
315L
4, 6, 8 508 120 635 645 508 625 216 80 M20X42 170 22 71 315 45 845 28 1325
2 610 125 730 710 560 775 254 75 M24X50 140 20 67.5 355 49 1010 28 1500
355M
4, 6, 8 610 125 730 710 560 775 254 95 M24X50 170 25 86 355 49 1010 28 1530
2 610 125 730 710 630 775 254 75 M24X50 140 20 67.5 355 49 1010 28 1500
355L
4, 6, 8 610 125 730 710 630 775 254 95 M24X50 170 25 86 355 49 1010 28 1530

6
DIMENSION DRAWING FLANGEMOUNTING (B5)

Frame
POLES AC AD D DH E F G L M N P S T
Size
63M 2, 4 130 115 11 M4X12 23 4 8.5 230 115 95 140 10 3
71M 2, 4, 6 145 127 14 M5X12 30 5 11 255 130 110 160 10 3.5
80M 2, 4, 6, 8 175 145 19 M6X16 40 6 15.5 295 165 130 200 12 3.5
90S 2, 4, 6, 8 195 155 24 M8X19 50 8 20 320 165 130 200 12 3.5
90L 2, 4, 6, 8 195 155 24 M8X19 50 8 20 345 165 130 200 12 3.5
100L 2, 4, 6, 8 215 180 28 M10X22 60 8 24 385 215 180 250 15 4
112M 2, 4, 6, 8 240 190 28 M10X22 60 8 24 400 215 180 250 15 4
132S 2, 4, 6, 8 275 210 38 M12X28 80 10 33 470 265 230 300 15 4
132M 2, 4, 6, 8 275 210 38 M12X28 80 10 33 510 265 230 300 15 4
160M 2, 4, 6, 8 330 255 42 M16X36 110 12 37 615 300 250 350 19 5
160L 2, 4, 6, 8 330 255 42 M16X36 110 12 37 660 300 250 350 19 5
180M 2, 4, 6, 8 380 280 48 M16X36 110 14 42.5 700 300 250 350 19 5
180L 2, 4, 6, 8 380 280 48 M16X36 110 14 42.5 740 300 250 350 19 5
200L 2, 4, 6, 8 420 305 55 M20X42 110 16 49 770 350 300 400 19 5
225S 4, 6, 8 470 335 60 M20X42 140 18 53 815 400 350 450 19 5
2 470 335 55 M20X42 110 16 49 820 400 350 450 19 5
225M
4, 6, 8 470 335 60 M20X42 140 18 53 845 400 350 450 19 5
2 510 370 60 M20X42 140 18 53 920 500 450 550 19 5
250M
4, 6, 8 510 370 65 M20X42 140 18 58 920 500 450 550 19 5
2 580 410 65 M20X42 140 18 58 995 500 450 550 19 5
280S
4, 6, 8 580 410 75 M20X42 140 20 67.5 995 500 450 550 19 5
2 580 410 65 M20X42 140 18 58 1045 500 450 550 19 5
280M
4, 6, 8 580 410 75 M20X42 140 20 67.5 1045 500 450 550 19 5
2 645 500 65 M20X42 140 18 58 1185 600 550 660 24 6
315S
4, 6, 8 645 500 80 M20X42 170 22 71 1220 600 550 660 24 6
2 645 500 65 M20X42 140 18 58 1290 600 550 660 24 6
315M
4, 6, 8 645 500 80 M20X42 170 22 71 1325 600 550 660 24 6
2 645 500 65 M20X42 140 18 58 1290 600 550 660 24 6
315L
4, 6, 8 645 500 80 M20X42 170 22 71 1325 600 550 660 24 6
2 710 645 75 M24X50 140 20 67.5 1500 740 680 800 24 6
355M
4, 6, 8 710 645 95 M24X50 170 25 86 1530 740 680 800 24 6
2 710 645 75 M24X50 140 20 67.5 1500 740 680 800 24 6
355L
4, 6, 8 710 645 95 M24X50 170 25 86 1530 740 680 800 24 6

7
 Air Compressor Air Dryer Inverter

Aero Worm Gear

Aero NMRV
Aero Helical Gear Motor

Ring Blower Turbo Blower Exhaust Fan

Chain Hoist Wire Rope Hoist Clutch and Brake