Page 1 of 14

To view other code types click one of the links below.

Diagnostic Troubleshoot Code

Description
Codes SIS Links
[Data Link] SPN, CID, or PID - FMI
[J1939/CDL] Parking Brake Switch
- MID 113 - CID 0070 - FMI
[ATA] Inlet Air Heater 02
70-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Steering Axle Temperature
- MID 113 - CID 0075 - FMI
[CDL] Steering Oil Temperature 03
75-03
Sensor - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Steering Axle Temperature
- MID 113 - CID 0075 - FMI
[CDL] Steering Oil Temperature 04
75-04
Sensor - Electronic Control Module
(ECM) - Replace
- Voltage Below Normal

- MID 113 - CID 0168 - FMI

[J1939] Battery Potential 03
[CDL] Electrical System Voltage - Using Caterpillar
168-03 Monitoring System to
[ATA] ECM Battery Power Determine Diagnostic
Codes
- Voltage Above Normal - Electronic Control Module
(ECM) - Replace
[J1939] Battery Potential
- MID 113 - CID 0168 - FMI
[CDL] Electrical System Voltage
04
168-04
[ATA] ECM Battery Power - Electronic Control Module
(ECM) - Replace
- Voltage Below Normal

[J1939] Transmission Oil

Temperature
177-03
[CDL] Transmission Oil - MID 113 - CID 0177 - FMI
Temperature Sensor 03

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 2 of 14

- Electronic Control Module

[ATA] Transmission Oil (ECM) - Replace
Temperature

- Voltage Above Normal

[J1939] Transmission Oil
Temperature

[CDL] Transmission Oil - MID 113 - CID 0177 - FMI

Temperature Sensor 04
177-04
- Electronic Control Module
[ATA] Transmission Oil (ECM) - Replace
Temperature

- Voltage Below Normal

[J1939] Engine Speed
- MID 113 - CID 0190 - FMI
[CDL] Engine Speed Sensor 02
190-02 - Speed Sensor - Adjust
[ATA] Primary Engine Speed
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Total Power Takeoff Hours

248-09 [CDL/ATA] CAT Data Link - MID 113 - CID 0248 - FMI
09
- Abnormal Update Rate
[CDL] Electronic Control Module
- MID 113 - CID 0254 - FMI
12
254-12 [ATA] ECM Fault
- Electronic Control Module
- Bad Device or Component (ECM) - Replace

[CDL] Electronic Control Module - MID 113 - CID 0254 - FMI

13
254-13 [ATA] ECM Fault
- Calibration
- Out of Calibration - Calibration

- MID 113 - CID 0269 - FMI

[CDL] Sensor Power Supply 03
269-03 - Electronic Control Module
- Voltage Above Normal (ECM) - Replace
- System Schematic

- MID 113 - CID 0269 - FMI

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 3 of 14

04
- Electronic Control Module
(ECM) - Replace
[CDL] Sensor Power Supply
269-04 - System Schematic
- Voltage Below Normal - Using Caterpillar
Monitoring System to
Determine Diagnostic
Codes

[CDL] Service Brake Pedal Switch - MID 113 - CID 0298 - FMI
02
298-02
- Data Erratic, Intermittent or - Electronic Control Module
Incorrect (ECM) - Replace

- MID 113 - CID 0299 - FMI

08
- Electronic Control Module
[CDL] Transmission Lever Position (ECM) - Replace
Sensor
299-08 - Calibration
- Abnormal Frequency, Pulse - Calibration
Width or Period - Using Caterpillar
Monitoring System to
Determine Diagnostic
Codes

[CDL] Transmission Lever Position - MID 113 - CID 0299 - FMI

Sensor 13
299-13
- Calibration
- Out of Calibration - Calibration

[CDL] Transmission Auto - MID 113 - CID 0368 - FMI

02
368-02
- Data Erratic, Intermittent or - Electronic Control Module
Incorrect (ECM) - Replace

- MID 113 - CID 0468 - FMI

08
[CDL] Service Brake Pedal Position
Sensor - Electronic Control Module
468-08 (ECM) - Replace
- Abnormal Frequency, Pulse - Using Caterpillar
Width or Period Monitoring System to
Determine Diagnostic
Codes

[CDL] Implement Lockout Switch

490-02 - MID 113 - CID 0490 - FMI
- Data Erratic, Intermittent or 02

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 4 of 14

Incorrect - Electronic Control Module

(ECM) - Replace

[J1939] Torque Converter Lockup - MID 113 - CID 0573 - FMI

Engaged 08
- Electronic Control Module
[CDL] Inching Pedal Position (ECM) - Replace
573-08
Sensor - Using Caterpillar
Monitoring System to
- Abnormal Frequency, Pulse Determine Diagnostic
Width or Period Codes
[J1939] Torque Converter Lockup
Engaged - MID 113 - CID 0573 - FMI
13
573-13 [CDL] Inching Pedal Position
Sensor - Calibration
- Calibration
- Out of Calibration
[J1939] Parking Brake Off Actuator
- MID 113 - CID 0618 - FMI
[CDL] Left Secondary Brake Switch 02
618-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Antenna Electronics
- MID 113 - CID 0621 - FMI
[CDL] Downshift Switch 02
621-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] J1922
- MID 113 - CID 0622 - FMI
[CDL] Upshift Switch 02
622-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Red Stop Lamp
- MID 113 - CID 0623 - FMI
[CDL] Directional Switch 02
623-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect

[J1939] Red Stop Lamp

623-07 - MID 113 - CID 0623 - FMI
[CDL] Directional Switch 07

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 5 of 14

- Electronic Control Module

- Mechanical system not (ECM) - Replace
responding properly
[J1939] Electronic Drive Unit Power
Relay
- MID 113 - CID 0650 - FMI
650-02 [CDL] Harness Code 02
- System Schematic
- Data Erratic, Intermittent or
Incorrect
[J1939] Engine Injector Cylinder
#18 - MID 113 - CID 0668 - FMI
12
668-12
[CDL] Transmission Shift Lever - MID 113 - CID 0299 - FMI
08
- Bad Device or Component
[J1939] Engine Injector Cylinder
#21 - MID 113 - CID 0671 - FMI
02
[CDL] Transmission Output Speed
671-02 - Speed Sensor - Adjust
Sensor
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Engine Injector Cylinder
#22 - MID 113 - CID 0672 - FMI
02
[CDL] Torque Converter Output
672-02 - Speed Sensor - Adjust
Speed Sensor
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Engine Injector Cylinder
#23 - MID 113 - CID 0673 - FMI
02
[CDL] Transmission Output Speed
673-02 - Speed Sensor - Adjust
Sensor #2
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect

[J1939] Engine Injector Cylinder

#24 - MID 113 - CID 0674 - FMI
674-02 02
[CDL] Transmission Intermediate
Speed Sensor #1 - Speed Sensor - Adjust
- Electronic Control Module

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 6 of 14

- Data Erratic, Intermittent or (ECM) - Replace

Incorrect
[J1939] Engine Glow Plug Lamp
- MID 113 - CID 0675 - FMI
[CDL] Transmission Intermediate 02
675-02 Speed Sensor #2 - Speed Sensor - Adjust
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect

- MID 113 - CID 0676 - FMI

[J1939] Engine Glow Plug Relay 08
[CDL] Left Track Steering Lever - Electronic Control Module
676-08 Position Sensor (ECM) - Replace
- Using Caterpillar
- Abnormal Frequency, Pulse Monitoring System to
Width or Period Determine Diagnostic
Codes

- MID 113 - CID 0677 - FMI

[J1939] Engine Starter Motor Relay 08
[CDL] Right Track Steering Lever - Electronic Control Module
677-08 Position Sensor (ECM) - Replace
- Using Caterpillar
- Abnormal Frequency, Pulse Monitoring System to
Width or Period Determine Diagnostic
Codes
[J1939] Transmission Gear Shift
Inhibit Request - MID 113 - CID 0681 - FMI
03
681-03
[CDL] Parking Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Transmission Gear Shift
Inhibit Request - MID 113 - CID 0681 - FMI
05
681-05
[CDL] Parking Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Transmission Gear Shift
Inhibit Request - MID 113 - CID 0681 - FMI
06
681-06
[CDL] Parking Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal

[J1939] Disengage Differential

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 7 of 14

Lock Request - Central

- MID 113 - CID 0689 - FMI
03
689-03 [CDL] Left Brake Solenoid
- Electronic Control Module
- Voltage Above Normal (ECM) - Replace

[J1939] Disengage Differential

Lock Request - Central - MID 113 - CID 0689 - FMI
05
689-05
[CDL] Left Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Disengage Differential
Lock Request - Central - MID 113 - CID 0689 - FMI
06
689-06
[CDL] Left Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Disengage Differential
Lock Request - Central Front - MID 113 - CID 0690 - FMI
03
690-03
[CDL] Right Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Disengage Differential
Lock Request - Central Front - MID 113 - CID 0690 - FMI
05
690-05
[CDL] Right Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Disengage Differential
Lock Request - Central Front - MID 113 - CID 0690 - FMI
06
690-06
[CDL] Right Brake Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Disengage Differential
Lock Request - Central Rear - MID 113 - CID 0691 - FMI
03
691-03
[CDL] Transmission Solenoid 1 - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal

[J1939] Disengage Differential

691-05 Lock Request - Central Rear - MID 113 - CID 0691 - FMI
05
[CDL] Transmission Solenoid 1 - Electronic Control Module

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 8 of 14

(ECM) - Replace
- Current Below Normal
[J1939] Disengage Differential
Lock Request - Central Rear - MID 113 - CID 0691 - FMI
06
691-06
[CDL] Transmission Solenoid 1 - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Disengage Differential - MID 113 - CID 0691 - FMI
Lock Request - Central Rear 07
- Electronic Control Module
691-07 [CDL] Transmission Solenoid 1
(ECM) - Replace
- Mechanical system not - Calibration
responding properly - Calibration
[J1939] ABS Offroad Switch
Request - MID 113 - CID 0692 - FMI
03
692-03
[CDL] Transmission Solenoid 2 - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] ABS Offroad Switch
Request - MID 113 - CID 0692 - FMI
05
692-05
[CDL] Transmission Solenoid 2 - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] ABS Offroad Switch
Request - MID 113 - CID 0692 - FMI
06
692-06
[CDL] Transmission Solenoid 2 - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] ABS Offroad Switch - MID 113 - CID 0692 - FMI
Request 07
- Electronic Control Module
692-07 [CDL] Transmission Solenoid 2
(ECM) - Replace
- Mechanical system not - Calibration
responding properly - Calibration

[J1939] ASR Offroad Switch - MID 113 - CID 0693 - FMI

Request 03
693-03
- Electronic Control Module
[CDL] Transmission Solenoid 3 (ECM) - Replace

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 9 of 14

- Voltage Above Normal

[J1939] ASR Offroad Switch
Request - MID 113 - CID 0693 - FMI
05
693-05
[CDL] Transmission Solenoid 3 - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] ASR Offroad Switch
Request - MID 113 - CID 0693 - FMI
06
693-06
[CDL] Transmission Solenoid 3 - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] ASR Offroad Switch - MID 113 - CID 0693 - FMI
Request 07
- Electronic Control Module
693-07 [CDL] Transmission Solenoid 3
(ECM) - Replace
- Mechanical system not - Calibration
responding properly - Calibration
[J1939] ASR Hill Holder Switch
Request - MID 113 - CID 0694 - FMI
03
694-03
[CDL] Transmission Solenoid 4 - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] ASR Hill Holder Switch
Request - MID 113 - CID 0694 - FMI
05
694-05
[CDL] Transmission Solenoid 4 - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] ASR Hill Holder Switch
Request - MID 113 - CID 0694 - FMI
06
694-06
[CDL] Transmission Solenoid 4 - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] ASR Hill Holder Switch - MID 113 - CID 0694 - FMI
Request 07
- Electronic Control Module
694-07 [CDL] Transmission Solenoid 4
(ECM) - Replace
- Mechanical system not - Calibration
responding properly - Calibration

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 10 of 14

[J1939] Engine Override Control

Mode - MID 113 - CID 0695 - FMI
03
695-03
[CDL] Transmission Solenoid 5 - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Engine Override Control
Mode - MID 113 - CID 0695 - FMI
05
695-05
[CDL] Transmission Solenoid 5 - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Engine Override Control
Mode - MID 113 - CID 0695 - FMI
06
695-06
[CDL] Transmission Solenoid 5 - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Engine Override Control - MID 113 - CID 0695 - FMI
Mode 07
- Electronic Control Module
695-07 [CDL] Transmission Solenoid 5
(ECM) - Replace
- Mechanical system not - Calibration
responding properly - Calibration
[J1939] Auxiliary PWM Driver #1
- MID 113 - CID 0697 - FMI
03
697-03 [CDL] Priority Valve Solenoid
- Electronic Control Module
- Voltage Above Normal (ECM) - Replace

[J1939] Auxiliary PWM Driver #1

- MID 113 - CID 0697 - FMI
05
697-05 [CDL] Priority Valve Solenoid
- Electronic Control Module
- Current Below Normal (ECM) - Replace

[J1939] Auxiliary PWM Driver #1

- MID 113 - CID 0697 - FMI
06
697-06 [CDL] Priority Valve Solenoid
- Electronic Control Module
- Current Above Normal (ECM) - Replace

[J1939] Auxiliary PWM Driver #2

- MID 113 - CID 0698 - FMI
03
698-03 [CDL] Left Steering Clutch Solenoid
- Electronic Control Module
- Voltage Above Normal (ECM) - Replace

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 11 of 14

[J1939] Auxiliary PWM Driver #2

- MID 113 - CID 0698 - FMI
05
698-05 [CDL] Left Steering Clutch Solenoid
- Electronic Control Module
- Current Below Normal (ECM) - Replace

[J1939] Auxiliary PWM Driver #2

- MID 113 - CID 0698 - FMI
06
698-06 [CDL] Left Steering Clutch Solenoid
- Electronic Control Module
- Current Above Normal (ECM) - Replace

[J1939] Auxiliary PWM Driver #3

- MID 113 - CID 0699 - FMI
[CDL] Right Steering Clutch 03
699-03
Solenoid - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Auxiliary PWM Driver #3
- MID 113 - CID 0699 - FMI
[CDL] Right Steering Clutch 05
699-05
Solenoid - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Auxiliary PWM Driver #3
- MID 113 - CID 0699 - FMI
[CDL] Right Steering Clutch 06
699-06
Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Autoshift Low Gear
Actuator
- MID 113 - CID 0718 - FMI
07
718-07 [CDL] Transmission System
- Electronic Control Module
- Mechanical system not (ECM) - Replace
responding properly
[J1939] Prestroke Actuator
- MID 113 - CID 0722 - FMI
03
722-03 [CDL] Secondary Brake Solenoid
- Electronic Control Module
- Voltage Above Normal (ECM) - Replace

[J1939] Prestroke Actuator

- MID 113 - CID 0722 - FMI
05
722-05 [CDL] Secondary Brake Solenoid
- Electronic Control Module
- Current Below Normal (ECM) - Replace

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 12 of 14

[J1939] Prestroke Actuator

- MID 113 - CID 0722 - FMI
06
722-06 [CDL] Secondary Brake Solenoid
- Electronic Control Module
- Current Above Normal (ECM) - Replace

- MID 113 - CID 1327 - FMI

[J1939] Engine Misfire Cylinder #5 08
[CDL] Left Brake Pedal Position - Electronic Control Module
1327-08 Sensor (ECM) - Replace
- Using Caterpillar
- Abnormal Frequency, Pulse Monitoring System to
Width or Period Determine Diagnostic
Codes

- MID 113 - CID 1328 - FMI

[J1939] Engine Misfire Cylinder #6 08
[CDL] Right Brake Pedal Position - Electronic Control Module
1328-08 Sensor (ECM) - Replace
- Using Caterpillar
- Abnormal Frequency, Pulse Monitoring System to
Width or Period Determine Diagnostic
Codes
[J1939] Engine Misfire Cylinder #7
- MID 113 - CID 1329 - FMI
[CDL] Left Brake Pedal Switch 02
1329-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Engine Misfire Cylinder #8
- MID 113 - CID 1330 - FMI
[CDL] Right Brake Pedal Switch 02
1330-02
- Electronic Control Module
- Data Erratic, Intermittent or (ECM) - Replace
Incorrect
[J1939] Thresher Speed
- MID 113 - CID 1488 - FMI
[CDL] Implement Lever Float 03
1488-03
Detent Electromagnet - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal

[J1939] Thresher Speed - MID 113 - CID 1488 - FMI

05
1488-05 [CDL] Implement Lever Float - Electronic Control Module
Detent Electromagnet (ECM) - Replace

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 13 of 14

- Current Below Normal

[J1939] Thresher Speed
- MID 113 - CID 1488 - FMI
[CDL] Implement Lever Float 06
1488-06
Detent Electromagnet - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Implement Park State
- MID 113 - CID 1870 - FMI
[CDL] Blade Control Handle Thumb 03
1870-03
Rocker Position Sensor - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Implement Park State
- MID 113 - CID 1870 - FMI
[CDL] Blade Control Handle Thumb 04
1870-04
Rocker Position Sensor - Electronic Control Module
(ECM) - Replace
- Voltage Below Normal
[J1939] Aux Valve 2 Fail Safe
Mode Command - MID 113 - CID 1933 - FMI
03
1933-03
[CDL] Blade Angle Left Solenoid - Electronic Control Module
(ECM) - Replace
- Voltage Above Normal
[J1939] Aux Valve 2 Fail Safe
Mode Command - MID 113 - CID 1933 - FMI
05
1933-05
[CDL] Blade Angle Left Solenoid - Electronic Control Module
(ECM) - Replace
- Current Below Normal
[J1939] Aux Valve 2 Fail Safe
Mode Command - MID 113 - CID 1933 - FMI
06
1933-06
[CDL] Blade Angle Left Solenoid - Electronic Control Module
(ECM) - Replace
- Current Above Normal
[J1939] Aux Valve 2 Fail Safe Mode
- MID 113 - CID 1934 - FMI
03
1934-03 [CDL] Blade Angle Right Solenoid
- Electronic Control Module
- Voltage Above Normal (ECM) - Replace

[J1939] Aux Valve 2 Fail Safe Mode

1934-05 - MID 113 - CID 1934 - FMI
[CDL] Blade Angle Right Solenoid 05

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.
 Page 14 of 14

- Electronic Control Module

- Current Below Normal (ECM) - Replace
[J1939] Aux Valve 2 Fail Safe Mode
- MID 113 - CID 1934 - FMI
06
1934-06 [CDL] Blade Angle Right Solenoid
- Electronic Control Module
- Current Above Normal (ECM) - Replace

Component Based Troubleshooting is for technical reference only. It is not intended to replace the knowledge and skills of the servicing
technician, and does NOT imply warranty coverage.

Content Owner: Brian Hall

Caterpillar Confidential: Green
Copyright 2004 - 2008 Caterpillar Inc.
All Rights Reserved.

file://Y:\zdiag\delivery\datasets\TTT090\113\1.html 2013.11.11.