Scribd
Upload
245 views1 page

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for galvanic anodes used for cathodic protection. It lists specific tests and inspections that must be performed by inspectors and vendors at different stages, including: 1) Visual inspections of anode casting and any surface irregularities. 2) Checking material test certificates and performing chemical analysis, open circuit potential, and capacity tests. 3) Inspecting dimensions, mass, cable connections, and identification markings to ensure specifications are met. 4) Checking packaged anodes and backfill materials meet documented requirements before shipment.

Uploaded by

Eagle Spirit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
245 views1 page

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for galvanic anodes used for cathodic protection. It lists specific tests and inspections that must be performed by inspectors and vendors at different stages, including: 1) Visual inspections of anode casting and any surface irregularities. 2) Checking material test certificates and performing chemical analysis, open circuit potential, and capacity tests. 3) Inspecting dimensions, mass, cable connections, and identification markings to ensure specifications are met. 4) Checking packaged anodes and backfill materials meet documented requirements before shipment.

Uploaded by

Eagle Spirit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION & TESTING REQUIREMENTS REVISION: 06/29/2011 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 08/21/2006 IR171300 1 of 1


SCOPE: GALVANIC ANODES: For Cathodic Protection.

TEST AND INSPECTION PER: 17-SAMSS-006

(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
*** X
Pre-Fabrication/Production Requirements
Anode Casting
Specification Details / Notes:
As per applicable standard drawings.

0020 X Material test certificate

0020
0010
*** X
In process inspection & test requirement
Chemical Analysis, Open Circuit Potential and Capacity test
Specification Details / Notes:
Per 17-SAMSS-006.

0020 X Surface Irregularities Anode shall be inspected during anode assembly (not during
casting) and shall comply with NACE RP-0387.

0030 X Dimensions and Mass Anode shall be inspected during anode assembly (not during
casting).

0040 X Cable Connection (If applicable) Per 17-SAMSS-006.

0050 X Packaged Anodes and backfill Per 17-SAMSS-006. Check that the cotton bag has been
approved by company representative.

0030
0030
***
X
Final inspection & test requirements
Identification
Specification Details / Notes:
Each non ribbon type anode shall be die stamped or tagged to
identify manufacturer, heat no., purchase order no., and item
no.

0040 X Packaging & Shipment Per 17-SAMSS-006.

Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form SA175 - 000003 for instructions on using this form.

End of IR171300

You might also like