PRODUCT INFORMATION
DESCRIPTION Dulux Professional Weathershield Creation Sandtex are formulated with special materials
such as mineral crystals that give them unparalleled toughness and durability, making them
a perfect choice for exteriors and interiors. Their high consistency and filling properties
allow them to hide the surface imperfections.
BENEFITS • Dolomite Crystals endow the paint film with
superior toughness and high durability.
• Provides aesthetics to building exteriors & interiors.
• Water repellence property ensures a longer life of the texture.
USAGE Ideal for new and previously painted exterior masonry, plaster, and building boards surfaces
PACK SIZE 20 & 30 Kgs
COLOUR RANGE Refer to Colour Collaterals
PHYSICAL FILM PROPERTIES
Resistant to the levels of atmospheric humidity normally experienced in exterior
WATER RESISTANCE
environments
PRODUCT DATA
Film Composition Pigment : Light fast Non-Lead / Chrome Pigments
Binder : Pure Acrylic Emulsion
Solvent : Water
VOC Level as per EU directive 15-45 gm/L. VOC for the shades will vary depending on the colorant quantity
Gloss/Sheen Level Mid Sheen
Flash Point (IS 101/1987, Part 1,Sec 6) Non-Flash
Stability of Thinned Paint Use within 24 hours of thinning after mixing
Dry Film Thickness (Calculated) Varies as per product
Practical Coverage The spreading capacity of this product will vary considerably according to the roughness
and porosity of the surface.
On plastered surface of low porosity : 3-15 sq ft / Kg / coat
These figures are only an approximation guide. Due to variation in different surfaces, the
coverage may vary. It is recommended to do a coverage trial before finalizing the paint
requirement.
Exterior | Aesthetics
Issued | 01 2017
APPLICATION GUIDE
Surface preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,
algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed
by water jetting if required. Fill up all minor cracks and defects with cement and sand mixture
in the ratio 1:3. Avoid application of putty or filling compounds while painting an exterior
surface. Application of one coat of Pre-Treatment coat is recommended for better
performance of the paint.
Application Tools By roller, brush or conventional /airless spray (0.5mm to 3mm)
Dilution No thinning of the material is recommended for the final coat. But for ease of application a
little water can be sprinkled.
System Recommendation SUBSTRATE SEALER (1 COAT) TEXTURE (1 COAT) TOPCOAT (2 COATS)
Dulux Professional Dulux Professional
Repainting &
Weathershield Weathershield
Powdery Surfaces
Sealer E1000 Creation Sandtex Dulux Professional
Dulux Professional Dulux Professional Weathershield Range
New and
Weathershield Weathershield
Alkali Surfaces
Sealer E1000 Creation Sandtex
For alternative coating systems, please refer to our Sales Representative
Note: Do not apply in temperatures lower than 5º C, relative humidity higher than 85% or
when immediate rains are forecasted.
CLEANING UP Clean all equipment with clean water immediately after use.
In case of any complaints please contact, Customer Care Cell Ph: 1800 3000 4455 Email: customercare.india@akzonobel.com Or write to: Customer Care Manager,
Akzo Nobel India Ltd., DLF Cyber Terraces, Building No. 5, Tower A, 20th Floor, DLF Cyber City, Phase III, Gurgaon -122002, Haryana, INDIA www.dulux.in
Registered office: Akzo Nobel India Limited, Geetanjali Apartment, 1st Floor 8B Middleton Street Kolkata – 700071 MADE IN INDIA
Exterior | Aesthetics
Issued | 01 2017
