Scribd
Upload
846 views2 pages

Gas Cutting & Welding Checklist

The document is a safety checklist for welding and gas cutting activities. It contains questions to ensure safety precautions are followed before, during, and after welding or gas cutting. The checklist verifies proper equipment is used, equipment is in good condition without leaks, fire safety measures are in place, workers are trained, and precautions are taken after welding is completed to watch for fires.

Uploaded by

Dth Infra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
846 views2 pages

Gas Cutting & Welding Checklist

The document is a safety checklist for welding and gas cutting activities. It contains questions to ensure safety precautions are followed before, during, and after welding or gas cutting. The checklist verifies proper equipment is used, equipment is in good condition without leaks, fire safety measures are in place, workers are trained, and precautions are taken after welding is completed to watch for fires.

Uploaded by

Dth Infra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

IOCL DTH Infra Engg.

(P)
Ltd.

Civil and Structural Works for Installation Of


“Indresidh” Demonstration Plant at Panipat

Format No. IOCL/LTHE/DTH/HSE/FO/16

Safety Checklist for Welding & Gas Cutting


SAFETY CHECKLIST FOR  ARC WELDING AND GAS CUTTING

Safety Questionnaire Yes No Remarks

0.1 Before Commencing Welding Or Gas Cutting Activity


Are you a trained worker for welding
1.1
and gas cutting
Have you put on the correct personal
1.2 protective equipment meant for
welding
1.2) Equipment Set Up & Condition
Are the manifolds, gas regulators, hose
i
and torches in good conditions?
Are the short-length / extension hose
ii properly connected and according to
colour coding
Are the hosts, joints and valves free
iii
from leakage?
Are the gas hoses properly arranged or
iv
suspended
Are the approved flash-back arrestor
v fitted to the gas outlet and inlet of the
cutting torch?
Are the gas torch and gas hoses
vi
provided with valid inspection tags ?
Are you welding at the designated area
Vii
meant for welding purposes
Is there a fire extinguisher nearby the
Vii
welding location
Are you trained to operate the fire
Viii
extinguisher
Did you conduct pre site survey to look
out for possible nearby flammable
Viiii substance or ignition source before
you commence welding activities
IOCL DTH Infra Engg. (P)
Ltd.

Civil and Structural Works for Installation Of


“Indresidh” Demonstration Plant at Panipat

During Welding or Gas Cutting Yes No Remarks


2.1 A ‘spark-gun’ provided for the lighting
of gas torch
2.2 Are the gas regulators set to correct
pressure (for gas cylinders only)?

2.3 Is the gas torch shut off before moving


around
After Welding or Gas Cutting Activity
3.1 Is the gas turned off?

3.2 Is the supply valve securely closed

3.3 Are the torches and gas hoses


disconnected from supply and
removed out of the tanks?
3.4 Did you perform fire watch during the
lst hour after welding activity
completed to look out for possible
smoldering smoke

You might also like