thanks to yalmac
MIBTOOL using via D-Link Adapter
All you need Mibtool sd card and D-Link adapter. Than you can patch and Enable all MIB2 harman unit.
Please download mibtool from here :
mib.mibsolution.one
Before copy files to your sd card, please fat32 format your sd.
For extract zip file please use winrar than open mibtool files go to M.I.B. + patch and inside of M.I.B. +
patch files copy all of them to your SD card.
Inside of your sd card has to be like that. Nothing more or less.
When your MIBTOOL sd is done, please put your sd to unit SD1
Prepare D-Link connection via Putty and car ignition on! BE SURE YOUR CAR BATTERY IS GOOD!
D-Link - e.g. DUB-E100 HW rev. D1 - USB-Ethernet adapter is required to connect to your MHI2 unit.
Use Putty/Kitty to connect via UART or Telnet (MIB IP:172.16.250.248) and login into RCC
(recommended: port:123) or MMX (port:23).
Login and password for your units SW train has to be known.
Check your SW-train, a pre-patched ifs-root-stage2 has to be present within the folder /patches
Insert the SD card into slot SD1 of your MHI2 unit and login to the RCC shell:
User : root
Pass: Please check the password pdf files find your unit pass
When you connect to unit via Putty than follow those command
#For Mount SD card in slot SD1 ---THIS IS NOT COMMAND only for INFO
mount -uw /net/mmx/fs/sda0/
# start M.I.B by typing --- ---THIS IS NOT COMMAND only for INFO
/net/mmx/fs/sda0/start
Than you will see this screen on your PC
FIRST YOU HAVE TO TAKE BACKUP--- Means just write 0 than enter It will auto take backup wait until
FINISHED
When doing something never ever ignition off ! DON’T DO Anything!
*************************************************************************************
*****************************************************
** 0 - Advanced Backup
Runs a full backup (RCC, MMX, EEPROM, ...) of your unit and places it into the folder
/backup/"your hardware ID"
** 1 - VIM patch (199 km/h)
Writes custom Video In Motion (VIM) speed of 199 km/h (yes, too slow for German
Autobahn) to your unit
Unit will automatically restart to save changes permanently
** 2 - VIM Original (6 km/h)
Writes factory default Video In Motion (VIM) speed to unit
Unit will automatically restart to save changes permanently
** 3 - IFS-ROOT-Stage2 flash patched image
Will create a backup if it was not already created before
applies patched IFS Stage 2 image - containing patched MIBRoot - to the unit
Copy FEC and EL List to Unit - like option 5
Unit will automatically restart to save changes permanently
** 4 - IFS-ROOT-Stage2 revert to Backup image
Applies original IFS Stage 2 image - containing original/stock MIBRoot - from your system
backup to the unit
Unit will automatically restart to save changes permanently
** 5 - Copy FEC and EL List to Unit
Copies ExceptionList.txt and/or FecContainer.fec placed within
e.g. /patches/MHI2_ER_SKG13_P4526_MU1440_PATCH to the unit
if no FEC and/or EL is inside /patch directory, files from /backup folder will be used
** 6 - Developer Menu activation
Developer Menu will be enabled - no need for VCP/VCDS or OBD11 ;)
Unit will automatically restart to save changes permanently
** 7 - CarPlay & Android Auto activation
Coding adaption channels for CP & AA as well as USB with iPhone support
with this, all you need for Carplay is coded, you never need some other coding tools ;-)
** 8 - Ambient Light Buttons Original
When you see this, first take a look on
https://www.glaskugelservice.de/codierung/ambientbeleuchtung
it is some special coding only for Skoda Octavia 5E, yet!
** 9 - Ambient Light Buttons patch (first, set to Original)
When you see this, first take a look on
https://www.glaskugelservice.de/codierung/ambientbeleuchtung
it is some special coding only for Skoda Octavia 5E, yet!
** F - Fix SVM error
Fix SVM Fault on Unit
** G - Install M.I.B. in GEM
Install M.I.B. for use in GEM on Unit
** O - Set OBD Status
Prevent Unit from OBD
** U - Mount USB writeable
makes USB devices writeable
** W - Mountpoints writeable
make some Mounts writeable on the unit
** R - Reboot Unit
restart the Unit
** C - cleanup Logs
delete all inside /log directory
** S - show Log (press Q for exit view)
show all our Logs from this Unit
** H - Help
this here...
** L - GPL License
