SIGN STORMTM

LED Sign Tube

Easy Retrofit Direct AC Power For New Installation

Hanging Installation

The SignStorm Sign tube from Beyond LED Technology is one of the most energy efficient product of 2021
which offers a very long lifespan, as they are designed primarily to substitute the fluorescent lamps.
SignStorm lamps are available with a Type B ballast bypass design that offers easy installation and
operation. In addition, these sign tube can be used with hard-wiring tombstone lamp-holders that can be
connected directly to incoming AC power leads. Dual-ended bypass lamps eliminate the need to replace
shunted tombstone lamp-holders in existing fluorescent luminaires, while maintaining a high Lumen
output and up to 125 lumens per watt efficacy. AC power code is also provided for new installation.

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 Specifications

Product Features
• Operating temperature: -20°C to 45°C

• High energy efficiency, long lifespan, 50,000 hour lifetime

• Lockable and Rotatable R17d end cap ensures easy installation and consistent light distribution

• Integral LED driver (non-isolated), eliminates the need for an external driver or ballast

• Up to 125 lumens per watt

• ETL listed

• High Quality and Efficacy Hongli 2835 chips

• This product is IP44 rated, therefore, it is touchproof and resistant to dust

• Universal operation at 120-277Vac 50-60Hz

• Environment friendly with no mercury

• Type B, ballast bypass design offers easy installation and operation

• Direct replacement for fluorescent lamps

• Reduced maintenance and replacement costs

• Available in four different sizes

• Option of making virtually any size by combining two parts of the product in one tube

• Non flicker, optical lens covers eliminate hot spots and ensure consistent light distribution

• Aluminium + PC lamp housing ensures less breakage and good heat dissipation

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
Components

SKU
Component Name Specification Image
Number

End Cap R17d for Sign End Cap R17d for

Tube (Needed when 152736 Sign Tube (Needed
Use as Tube) when Use as Tube)

Transparent Butt
Transparent Butt Joint 152735
Joint

Needed when use

Waterproof 153458 as fixture. Length:
39.37"

Power Cord with plug

Hanging Chain 152737 12", With "S" hook

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
SKU No. 152727 Specifications

Input Power 3W

T8 sign tube-single side

Model
PVST812-3WD-180-65K ETL

General Performance Lumen Up to 336LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 180°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 12"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 9 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
SKU No. 152728 Specifications

Input Power 4.5W

T8 sign tube-single side

Model
PVST818-4.5WD-180-65K ETL

General Performance Lumen Up to 507LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 180°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 18"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 12 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
SKU No. 152729 Specifications

Input Power 7.5W

T8 sign tube-single side

Model
PVST830-7.5WD-180-65K ETL

General Performance Lumen Up to 844LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 180°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 30"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 22 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
SKU No. 152730 Specifications

Input Power 10.5W

T8 sign tube-single side

Model
PVST842-10.5WD-180-65K ETL

General Performance Lumen Up to 1181LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 180°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 42"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 30 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
SKU No. 152731 Specifications

Input Power 6W

T8 sign tube-double sides

Model
PVST812-6WD-360-65K ETL

General Performance Lumen Up to 675LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 360°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 12"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 18 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
SKU No. 152732 Specifications

Input Power 9W

T8 sign tube-double sides

Model
PVST818-9WD-360-65K ETL

General Performance Lumen Up to 1012LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 360°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 18"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 24 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
SKU No. 152733 Specifications

Input Power 15W

T8 sign tube-double sides

Model
PVST830-15WD-360-65K ETL

General Performance Lumen Up to 1687LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 360°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 30"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 44 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
SKU No. 152734 Specifications

Input Power 21W

T8 sign tube-double sides

Model
PVST848-21WD-360-65K ETL

General Performance Lumen Up to 2362LM

Lumen Efficacy Up to 125LM/W

Color Temperature 6500K

CRI >80
Diffuser Type Clear
Beam Angle 360°

Input Voltage 120-277VAC 50/60Hz

Electrical
PF ≥0.9
DLC Type Type B
Power Ends 2 power ends
Physical
Size 48"
Lens Clear Cover
LED Brand Hongli
LED Type SMD 2835
LED QTY 60 PCS
Housing PC + Aluminum
Qualification
Driver Beyond LED Technology Driver

IP Rating IP44
Warranty Time 5 Years

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 Correlated Color Temperature (CCT)

Dimensions

The units covered by this report were intended to retrofit surface mount with diffuser for these models,
Type IC or non-IC recessed mount listed fluorescent luminaires that use maximum two tubular lamps, the
minimum lamp compartment dimensions are tabulated below:

MIN. distance
MAX.
SKU between tubes
Model Interconnected
Number installation lighting
Unit
sign(inches)
152734 BLT-ST842-21W-360-65K
3.94 20
152730 BLT-ST842-10.5W-180-65K
152733 BLT-ST830-15W-360-65K
3.94 20
152729 BLT-ST830-7.5W-180-65K
152732 BLT-ST818-9W-360-65K
3.94 20
152728 BLT-ST818-4.5W-180-65K
152731 BLT-ST812-6W-360-65K
3.94 20
152727 BLT-ST812-3W-180-65K

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
Single Sided

Double Sided

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 SKU number 152727 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 SKU number 152728 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 SKU number 152729 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 SKU number 152730 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 SKU number 152731 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 SKU number 152732 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 SKU number 152733 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 SKU number 152734 Light Distribution Testing Parameters

Luminaire Data

Photometric Results

Distribution Diagram The Average Illuminance Effective Figure

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 Notes Before Installation

1. Be careful to open the carton, contact us if any damage.

2. This product must be installed in accordance with the applicable installation, code by a person familiar
with the construction and operation of the product and the hazards involved.
3. “caution - risk of shock” and “disconnect power before servicing” when photoelectric switch provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be
connected, so as not to damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before
installation and install it at a flat place without vibration, no swing, no fire hazard.

Caution

Installation Instructions

Please keep this Quick Installation Guide for future reference.

Modifications to the product void the Warranty.
Suitable to replace fluorescent lamps as specified on the product label.

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 WARNING

1. INSTALLATION OR ASSEMBLY INSTRUCTIONS

a) Wiring instructions that specify the proper method of connecting the grounding means and
maintaining polarity shall be included with the luminaire in a manner that will require the installer
to handle the instructions during installation.
b) Specification of mounting hardware shall be included in the instruction sheet.
c) Other warnings that will not lead to misuse.

2. THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS

3. WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of sign
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.

4. WARNING – Risk of fire or electric shock. Install this kit only in host signs that have been identified in
the installation instructions and where the input rating of the retrofit kit does not exceed the input rating
of the sign.

5. WARNING – Risk of fire or electric shock. Installation of this LED retrofit kit may involve drilling or
punching of holes into the structure of the sign. Check for enclosed wiring and components to avoid
damage to wiring and electrical parts.

6. Installer should examine all parts that are not intended to be replaced by the retrofit kit for damage
and replace any damaged parts prior to installation of the retrofit kit.

7. Installers should not disconnect existing wires from lamp holder terminals to make new connections at
lamp holder terminals. Instead installers should cut existing lamp holder leads away from the lamp holder
and make new electrical connections to lamp holder lead wires by employing applicable connectors.

8. Repair and seal any unused openings in the electrical enclosure. Openings greater than 0.5 inches
diameter require a metal patch secured by screws or rivets and caulked with non-hardening caulk. Smaller
openings may be sealed with non-hardening caulk.

9. WARNING: To avoid potential fire or shock hazard, do not use this retrofit kit with existing shunted bi-
pin lamp holders in the host sign. Note: Shunted lamp holders are found only in fluorescent signs with
Instant-Start ballasts. Instant-start ballasts can be identified by the words "Instant Start" or "I.S." marked
on the ballast. This designation may be in the form of a statement pertaining to the ballast itself, or may
be combined with the marking for the lamps with which the ballast is intended to be used.

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 INSTALLATION GUIDE

1. DISCONNECT POWER OF LUMINAIRE

Disconnect power to luminaire or circuit (if possible). Ensure all power is off by using a voltmeter or other
method to confirm.

2. REMOVE EXISTING FLUORESCENT TUBE LAMP(S) AND BALLAST

a. Remove fixture lens, if present.

b. Remove existing fluorescent lamp(s).
c. Expose the sign raceway to access the wiring. Then cut input and output wires from the ballast, and
remove the ballast.

3. FIXTURE REWIRING

a. R17d lamp holder installation, please rewiring the fixture according to the below diagram.

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
b. Power cord installation, please rewiring the fixture according to the below diagram.

4. SIGN TUBE LIGHT ASSEMBLE

a. Please check the length of the original fluorescent tube, and then select the right components accordingly.

b. LED Sign tube light assemble

If R17d lamp holder installation, please assemble as shown below:

If Power cord installation, please assemble as shown below:

5. INSERT LED SIGN TUBE LIGHTS

5.1 R17d lamp holder installation

a. Read label on the lamp to ensure the power end of LED is aligned with powered tube socket, then insert
LED lamp in the normal way by sliding pins into sockets and rotating a quarter turn until LED tube locks in
place.
b. Repeat above step for all LED tube lamps.
c. Fix the hanging chain to hanging connector on the splicing part of the lamp, and hang up with chains
one to one between connectors, as shown below.
d. LED lamps are now fully installed.

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
e. Replace troffer lens, if present.
f. After modification completed. Attach the Replacement Marking and cautionary Label to a visible place
on the luminaire and keep it visible after installation.

5.2 Power cord installation

a. Fix the hanging chain to hanging connectors on the splicing part and end caps of the lamp, and hang up
with chains one to one between connectors, as shown below.
b. Read label on the lamp on the bottom to ensure the power end of LED. Use connector cord to link the
other end to the end of above lamp. Make sure the power of each circuit is not higher than 550W.
c. Read label on the lamp on the bottom to ensure the power end of LED. Insert the power cord to the
powered each end of the bottom lamp.
d. Connect the power cords together to AC input wire
e. LED lamps are now fully installed.
f. Replace troffer lens, if present.
g. After modification completed. Attach the Replacement Marking and cautionary Label to a visible place
on the luminaire and keep it visible after installation.

6. RESTORE THE POWER OF LUMINAIRE

Restore power to circuit/luminaire and test light. If necessary, adjust position of LED tube, and enjoy your
new LED tube light!

Trouble Shooting

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.
 Troubles Check points

Turn off the power and turn on again in 3 minutes.

Flickering of the light
If same phenomena occur, then call agencies.

Out of working Please check the connection.

Packaging

SKU Number Model Carton size (inches) Carton G.W (lbs)

BLT-ST842-21W-360-
152734 46.8 x 7.5 x 8.07 28.66
65K
BLT-ST830-15W-360-
152733 34.8 x 7.5 x 8.07 21.38
65K
BLT-ST818-9W-360-
152732 22.83 x 7.52 x 8.07 12.79
65K
BLT-ST812-6W-360-
152731 16.93 x 7.52 x 8.07 10.14
65K
BLT-ST842-10.5W-
152730 46.8 x 7.5 x 8.07 26.01
180-65K
BLT-ST830-7.5W-180-
152729 34.8 x 7.5 x 8.07 19.18
65K
BLT-ST818-4.5W-180-
152728 22.83 x 7.52 x 8.07 12.57
65K
BLT-ST812-3W-180-
152727 16.93 x 7.52 x 8.07 9.48
65K

Application

Widely used in supermarket, warehouse, garage, home, office, hotel, hospital, school etc.

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
 Safety Precautions

To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box
and all fixture labels.
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
Commercial installation, service and maintenance of luminaires should be performed by a qualified
licensed electrician.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a
qualified licensed electrician and check your local electrical code.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp
objects. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK

Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Turn off the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label information.
Make all electrical and grounded connections in accordance with the National Electrical Code and any
applicable local code requirements. All wiring connections should be capped with UL approved wire
connectors.

CAUTION: RISK OF INJURY

Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be hazardous to children.

Warranty

5 Years Warranty

(866) 786-1117 • www.BeyondLEDTechnology.com

Due to continuous product improvement, information in this document is subject to change.