Throughout the world, Parker is serving more than 400,000 customers to improve productivity and reliability in thousands of industries.

Parker motion and control systems are in operation on satellites orbiting the Earth, in machine tools and mobile equipment, on oil rigs and
refineries, in hospitals and laboratories, in fact, wherever there’s a need for motion and control, you’ll find Parker components and system
solutions hard at work. For more information, visit Parker’s web site at www.parker.com/eu or call freefone 00800 27 27 5374

Aerospace
Key Markets Key Products
• Commercial transports • Flight control systems and components
• Military aircraft • Hydraulic systems and components
• Regional transports • Fuel systems and components
• Aircraft engines • Pneumatic systems and components
• Business and general aviation • Inert oxygen generating systems
• Fluid metering, delivery and atomization devices
• Wheels and brakes
• Couplings, fittings, hoses and tubes

• Consistent quality Hydraulic, Lubrication &

Coolant Filtration Automation

• Technical innovation High-performance filtration

systems for production
Key Markets
• Factory automation
Key Products
• Pneumatic motion and control
• Transportation and automotive • Air preparation

• Premier customer service machinery in industrial, mobile

and military/marine applications.
•
•
•
Life sciences and medical
Machine tools
Semiconductor and electronics
•
•
•
Vacuum controls and sensors
Electromechanical stepper and servo motors, drives, and controls
Human machine interface
• Electric actuators, gantry robots, slides and linear motors
• Structural extrusion

Parkers technical resources provide the Climate & Industrial Controls

correct filtration technologies that conform Compressed Air & Key Markets Key Products
to your requirements. That’s why thousands Gas Filtration •
•
Refrigeration and air conditioning
Transportation/mobile
•
•
Pressure regulators
Check, ball and service valves
of manufacturers and equipment users around Complete line of compressed • Process • Value-added systems
• Industrial machinery • Thermostatic and expansion valves
the world rely on Parker Filtration products air/gas filtration products; • Medical/life sciences • Electronic controllers
• Fuel cells • Contaminant controls
and people. coalescing, particulate and • Precision cooling • Heating/air conditioning hose
adsorption filters in many • Gerotors

applications in many
Filtration
Worldwide Sales industries.
Photo courtesy of GLASBAU HAHN.
Key Markets Key Products
• Industrial machinery • Hydraulic, lubrication and coolant filters

and Service Process & Chemical •

•
Process
Mobile
•
•
Process, chemical, water and microfiltration filters
Compressed air and gas purification filters
Fluid Filtration • Marine • Condition monitoring
• Oil & gas • Analytical gas generators
Parker Filtration’s global reputation as a reliable Liquid filtration systems for •
•
Power generation and energy
Transportation
•
•
Nitrogen, hydrogen and zero air generators
Engine air, fuel, oil filtration and systems
supplier of superior filtration products is the result beverage, chemical and food • Food and beverage
processing; cosmetic, paint,
of a focused and integrated development and
water treatment; photo- Fluid Connectors
manufacturing system. processing; and micro-chip
Key Markets Key Products
fabrication.
Parker Filtration consolidates quality filtration •
•
Construction machinery
Agriculture
•
•
Rubber and thermoplastic hose
Industrial hose
products, manufactured by process filtration, air Racor Fuel Conditioning
•
•
Transportation
Mobile
•
•
Tube fittings and adaptors
Tubing and plastic fittings
and gas filtration and separation, fuel conditioning & Filtration
•
•
Industrial machinery
Oil & gas
•
•
Brass fittings and valves
Hose couplings
and filtration, hydraulic and lubrication filtration, • Quick disconnects

fluid power products and fluid condition monitoring Parker air, fuel and oil filtration
systems provide quality Hydraulics
equipment into one broad-based range that protection for engines
covers many markets and most applications, operating Key Markets Key Products
• Construction machinery • Hydraulic cylinders and accumulators
as detailed here. in any environment, anywhere • Agriculture • Hydraulic valves and controls
• Industrial machinery • Hydraulic motors and pumps
in the world. • Oil & gas • Power take-offs
• Truck hydraulics • Hydraulic systems
• Power generation and energy
System Contamination
Monitoring
Instrumentation
On-line dynamic particle
Key Markets Key Products
analysis, off-line bottle • Power generation • Medium/high pressure fittings and valves
sampling and fluid analysis and • Oil & gas • Instrumentation fittings, valves, manifolds and regulators
• Petrochemical • High purity fittings, valves and regulators
measurement of water content • Microelectronics • Fluoropolymer fittings, valves, pumps and regulators
polluting the oil in a system. • Biopharmaceutical • Analytical systems

All important and achievable,

cost-effective solutions available
to equipment manufacturers Seal
and end users alike. Key Markets Key Products
• Transportation • Elastomeric O-rings
• Energy, oil & gas • Homogeneous and inserted elastomeric shapes and diaphragms
• Semiconductor • Metal and plastic retained composite seals
• Aerospace • Polymeric and plastic dynamic seals
• Fluid power • Rubber and plastic boots/bellows
• Life sciences • Extruded and precision-cut/fabricated elastomeric seals
• Telecommunications • Thermoplastic engineered seals

Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK.
 Hydraulic Filtration and Contamination Control Products

Contents
Filtration and Reservoir Products

1. Low pressure filters 6. Filter indicators

ETF Series – Tanktop mounted filters (Previously 1200) 5 Indicators Series 159
TTF Series – Tanktop mounted filters 11
BGT Series – Tanktop mounted filters 21 7. Reservoir equipment
IN-AGB Series – In-tank mounted filters 33
Tanktopper Series I, II & III – Tanktop mounted Reservoirs
with integrated air breather 45 Co-polymer and steel reservoir solutions 167
Suction Return Series – Suction and return filters 53
Environmental Air Filters
Maxiflow Series – Spin-on filters 61
EAB Series 176
ATZ Series – Suction filters 67
ABL Series 179
Glass-Filled Nylon Air Breathers
2. Medium pressure filters
IP65 Rated Filler Breathers 184
15/40/80CN Series 73 Filler Breathers 186
45M/45M Eco Series (Previously 1145) 81 Screw-On Type Air Breathers 187
130 Eco Series (Previously 1300) 87 Metal Filler Breathers
Filler Breathers (Metal) 190
Lockable Filler Breathers 192
3. High pressure filters
Air Filters
15P/30P Series 95 Spin-On Air Breathers 193
100P Series (Previously H600 and H1000) 101 Fluid Level Indication
18/28/38P Series 107 Fluid Level Temperature Gauges 197
70/70 Eco Series (Previously 7000) 115 FL Series 202
22PD/32PD Series 123 CLS46 203
Fluid Power Products
4. Portable filtration systems Suction Elements 206
Diffusers 207
Guardian ®
129 Inline Filters 208
Filtration Unit 133 Drive Couplings 209
10MF Series 139 Multiclamp 211
PVS Series – Models 185, 600, 1200, 1800 and 2700 143 Inline Check Valves 216
Single Station Gauge Isolator Valves 217
5. Par-Gel 63mm Dia. Pressure Gauges 218
100mm Dia. Pressure Gauges 219
Par-Gel Water Removal Elements 153

Fluid Condition Monitoring and Flowmeters

8. Fluid condition monitoring 10. Flowmeters & monitors

LaserCM 221 LoFlow – Oil and Water Flowmeters 280

Universal Bottle Sampler 229 Easiflow – Meters and Flowswitches 281
Single Point Sampler 235 Dataflow – 4 to 20mA and Pulse Output Flow Transmitters 282
System 20 Monitors and Sensors 239 Dataflow Compact – Inline Flow Transmitter 283
MCM20 245 Flowline – Oil and Water Calibrated Flowmeters
Icount PD 249 (Brass and Aluminium) 284
H2Oil – Water in Oil Monitor 257 Flowline – Oil and Water Calibrated Flowmeters
MS100 and MS150 Moisture Sensors 261 (Stainless Steel) 285
Oilcheck Monitor 269 Flowline – Flowswitches 286
Par-Test™ 273 Hydraulic Test Equipment 287
Flow Products – For Compressed Air Applications 288
9. Transducers & transmitters
11. Guide to contamination control
Asic ‘Performer’ 277
Guide to Contamination Control 289

1 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK.
 Hydraulic Filtration and Contamination Monitoring Products

Important changes to our product

ordering information
Standard Product Tables and a Product Configurator

Parker Filtration has recently undertaken a review of its part Accordingly, in this new catalogue, you will find the new part
numbering with a view to standardising on a common part number system with both a configurator and a supersedes
number style for all Filtration products. As a result of the many cross reference relating to previous part numbers, issued in
acquisitions we have made over the past 10 years, it became earlier editions of our generic catalogues. In the event that the
clear to us that there was a need to standardise on a clear previous reference you use is not shown in this catalogue, could
format for our part numbers. we ask you to please contact our European Product Information
Centre. Contact details are on the back of this catalogue.

The examples below using the BGT Series Ordering configurator features items, which are marked in bold and are
Information, are included to explain how the Standard on a shortened delivery time. With this in mind we would ask
products are presented in the Ordering Information that when making a selection using the configurator you select
section of the catalogue and also how the new Product those items in bold to ensure the shortest lead-time.
Configurator works.
2b. The configurator has been designed to cover not only
Explanation the various models we offer but also different micron ratings,
Example 1. The Standard Products Table indicator options and port connections.
We have created a new catalogue ordering code and included
in this table are details of these new part numbers. 2c. Should you find that what you have selected is not
available in the configurator, please feel free to call our
Alongside this we have put the part number that has been European Product Information Centre (EPIC) to see if that
superceded from previous catalogues. It is our intention that all option can be made available. Contact details are available
items printed in the Standard Products Table will be available on the back of this catalogue.
from our central warehouse for ex-stock delivery.
Green shaded graphs and ordering information
Example 2. The Product Configurator Where pressure drop graphs and ordering information are
2a. As part of our new catalogue ordering code we have shown with a green tint, these options are ‘Eco’ options and
introduced an 8-box part number configurator. This environmentally friendly.
Example 1. The Standard Products Table
Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
BGT1210QLBPER323 BGTS500-S2 TXWL8C-10 T B15 M 500 BGT500 Length 12 10 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937859Q TXWL8L-10
BGT1220QLBPER323 BGTS500-S2 TXWL8C-20 T B15 M 500 BGT500 Length 12 20 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937868Q TXWL8L-20
BGT1510QLBPER483 BGTS1000-S3 TXWL12-10 T B15 M 1000 BGT1000 Length 15 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937862Q TXWL12-10
BGT1520QLBPER483 BGTS1000-S3 TXWL12-20 T B15 M 1000 BGT1000 Length 15 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937865Q TXWL12-20
BGT1710QBPER483 BGTS2000-S3 TXW14-10 T B15 M 2000 BGT2000 Length 17 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937772Q TXW14-10B
BGT1720QBPER483 BGTS2000-S3 TXW14-20 T B15 M 2000 BGT2000 Length 17 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937805Q TXW14-20B
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Example 2. The Product Configurator

Configurator examples filter including LEIF® element
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
BGT 15 05QL B S1 E R48 C

Configurator examples filter including conventional element

Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
BGT 18 02Q B S4 E 3R20 4

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
BGT Housing Code Element Glass fibre
3-390 l/min 11 Microglass III (for disposable elements)
3-500 l/min 12 Cellulose Ecoglass III (for Leif® elements) Wire mesh
4-600 l/min 13 Nom. rating Abs. rating
4-800 l/min 14 Disposable element 10C 02Q 05Q 10Q 20Q 040W
4-1000 l/min 15 LEIF® element 02QL 05QL 10QL 20QL
4-1500 l/min 16
4-2000 l/min 17
4-2400 l/min 18

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 1.2 bar, M10x1 G1 0.8 bar B
Fluorelastomer V Pressure gauge, setting 1.2 bar, G1/8 for dual port head and TSR series G2 1.5 bar E
Neoprene N Pressure switch 42V, 1.2 bar setting, NO/NC, M10x1 S1 2.0 bar for BGT-3 series H
Pressure switch 42V, 1.2 bar setting, NO with G1/8 BSP S2 Blocked bypass X
Pressure switch 42V, 1.2 bar setting, NC with G1/8 BSP S3 Other bypass settings on request
Pressure switch 250V, NO/NC with G1/8 S4
Pressure switch 220V, NO/NC with M10 S5
No indicator, indicator ports not machined N
No indicator, indicator port R plugged P
No indicator, indicator ports L + R plugged P2
Other settings for indicators / gauges on request on request
Note: For all dual head ports for BGTS apply G1/8 connection for indicators

Box 7 Box 8
Filter connection Options

Highlights Key (Denotes part number availability)

Ports Code Options Code
2" SAE BGT-3 R32 No diffuser required 1
3" SAE BGT-4 R48 Diffuser type T with perforated plate area 3
1x2" SAE flanged + 2x11/4" SAE flanged for BGT-3 R32M Diffuser type P without perforated plate area 4 123 Item is standard
3x11/4" SAE flanges + 1x1/2" SAE for BGT-4 3R20 Diffuser with integrated hose connection on request
No magnets 5 123 Item is standard green option
Dipstick 6
Plugged filling port 8 123 Item is semi standard
Diffuser type T and no magnets A
Diffuser type P and no magnets B
123 Item is non standard
Diffuser type T, no magnets, plugged filling port C
Diffuser type P, no magnets, plugged filling port D Note: Standard items are in stock, semi standard items are available within four weeks
Other combinations on request

2 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK.
The Importance of Patented Parker Products to our customers

Innovative filter design and patented product protection brings

value added benefits to our OEM customers and their end users.

Benefits that should help protect a manufacturers aftermarket as well

as ensure that equipment users specify quality Parker replacement
filter elements and accessories and help safeguard warranties.

Installing Parker Filtration patented filter assemblies such as the

Suction and Return Series and LEIF® (Low Environmental Impact
Filter) elements can provide the end user and OEM with some
positive benefits:

• LEIF® can provide increased OEM spares business.

• Guaranteed Parker quality with every replacement
filter element.
• Supports OEM end user loyalty to Parker elements.
• Support aftermarket sales and machinery
performance.
• Parker patented elements promote quality and
reliability to end users.

Low Pressure Filters

3
 Hydraulic Filtration and Contamination Monitoring Products

Providing the products and service

our customers expect
A Global Product Range

With this catalogue we offer our customers an easy way to Engineering and manufacturing excellence
find technical specification and ordering information about Parker Filtration’s Filter Division Europe (FDE) manufacturing
Parker hydraulic filtration, fluid contamination monitoring and focus is driven by a number of key elements that affect
fluid power products. all areas of the business. People productivity, customer
satisfaction, production throughput, quality and lean
Products shown in this catalogue have a broad range of
achievements are the drivers that help the FDE achieve
applications. Our filter products are particularly designed
ISO9001, QS9000, ISO9001 and ISO14001.
for hydraulic and lubrication systems and transmissions.
The fluid power products are also used in many industries Significant investment by our parent Parker Hannifin
and applications. Corporation continues to give FDE flexible manufacturing
systems, automated test equipment and excellent laboratory
Typical applications can vary from road sweepers, fork
test facilities.
lift trucks, agriculture harvesting machines, grass cutting
equipment, lorry mounted cranes, forestry equipment, press New product development programmes and on-going product
brakes, industrial power units, waste management trucks, improvement initiatives are vital elements in maintaining a
drilling equipment, marine, military equipment, paper mills, product range that meets customer demands for quality,
water treatment and filtration systems. reliability and engineering excellence.
For more information about our products send your inquiry R & D resources at the Parker Filtration locations in the UK,
to your nearest sales location, see contact information at the Finland and the Netherlands are both complementary and
back of this catalogue. comprehensive. Including, as examples, Multipass Test
Installations, fatigue test unit, cleanliness service (water
Important information on product ordering and detection, special analysis, particle counting and analysis), 3D
part numbers workstations, Thermal Cycle Test Chamber, Salt Spray and
Parker Filtration has recently undertaken a review of its part Humidity chambers.
numbering with a view to standardising on a common part Parker Hannifin (UK) Ltd, herewith declares that Parker
number style for all Filtration products. As a result of the many Hydraulic Filtration products are intended to be incorporated
acquisitions we have made over the past 10 years, it became into machinery covered by Directive 89/392/EEC, as amended
clear to us that there was a need to standardise on a clear and that the following harmonised standards have been
format for our part numbers. applied; EN982, EN292-1, EN292-2
Accordingly, in this new catalogue you will find the new part We furthermore declare that, machinery incorporating Parker
number system with a ‘product configurator’ and a supersedes Hydraulic Filtration products, is not allowed to be put into
reference relating to previous part numbers issued in earlier service until the machinery has been found and declared to be
editions of our generic catalogues. In the event that the in conformity with the provisions of Directive 89/392/EEC and
previous reference you have is not shown in this catalogue, with national implementing legislation.
could we ask you to please contact our Epic Centre, details of
which are on the back cover of this catalogue. In line with our policy of continuous product improvement,
Parker Hannifin (UK) Ltd reserve the right to alter product data
For additional information and an example explained, turn to and specification without notice. This does not affect your
page 2. statutory rights.
BSP ports offered in this catalogue conform to ISO228.
Notes:
1. Within this catalogue, each product has been allocated an operating temperature and
pressure range.
Supply chain management, service and support 2. The range listed for each filter is dedicated by the materials of construction and the
Parker is addressing operation efficiency by expanding the capability of the seals specified.
3. Consideration should also be given to the characteristics of the system fluid when
systematic approach called ‘Lean Manufacturing. Value stream specifying filters for extreme temperature and/or pressure applications.
analysis, flow manufacturing, reduced set-ups, manufacturing 4. The use of non-Parker replacement elements and spares may invalidate your warranty.

cell flexibility and fool-proofing systems are all contributing to

the continuous improvement in our manufacturing sites. ‘Lean’
is also expressed in our premier customer service and second-
to-none customer partnerships in supply chain management.

4 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK.
 Tanktop Mounted Return Line Filters

ETF Series MAX 140 I/min - 6 bar

Low pressure filters

5
 Tanktop Mounted Return Line Filters

ETF Series
Features & Benefits

Features Advantages Benefits

Co-polymer head Compact profile, lightweight and durable Less weight, smaller envelope and
cleaner appearance
Multiple return line ports Flexibility related to return line hose(s) More compact solutions can be
arrangement realised
Quick release cover No tools required to release the filter cover Easy change of filter element
Optional magnetic pre-filtration Removes ferro particles, even during bypass Improved fluid cleanliness levels
conditions
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
Full flow bypass with low hysteresis Reduction of bypass period due to low Improved protection of system
hysteresis
Only a small part of the total flow is
bypassing the element
Optional funnel Ensures that oil enters the tank under the Significant reduction of oil foaming
oil level

Typical Applications

Lorry mounted cranes

Agricultural equipment
Container hook loaders

The Parker Filtration ETF Series

Low Pressure Filters
For tank top mounting installation. The ETF Series
utilises a reinforced co-polymer head equipped
with two return ports and quick release cover. This
filter represents an economic solution for hydraulic
systems with nominal flows up to 140 l/min.

6 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 1
Specification

Pressure ratings: Filter element:

Max. 6 bar. Conventional style element with steel end caps.
Assembly: Degree of filtration:
Tank top mounted. Determined by multipass test according to ISO 16889.
Connections: Flow fatigue characteristics:
Threads G1” + G1” (ISO 228), port B Filter media is supported so that the optimum fatigue life is achieved.
supplied as plugged connection. Filtration media:
Filter housing: Microglass III.
Glass reinforced co-polymer. Element collapse rating:
Funnel made from steel. 8 bar (ISO 2941).
Seal material: Indicator options:
Nitrile. Setting 1.2 bar.
Operating temperature range: Options:
-20° to +80°C. Magnetic pre-filtration.
Bypass valve: Fluid compatibility:
Opening pressure 1.6 bar. Suitable for use with mineral and vegetable oils, and some
synthetic oils. For other fluids, please consult Parker Filtration.

Installation Details

Dimensions
ETF Length
mm (inches) A B
82 100
1 ETF45 78.5
(3.22) (3.94) (3.09)
mm G1
106 125 30
2 ETF60 (inches)
(1.18)
(4.17) (4.92)
150 177
3 ETF90
(5.90) (6.97)
200 225
4 ETF120
(7.87) (8.86)
260 300 A Ø 87
4A ETF140 (3.42)
(10.24) (11.81) B

Hole cut out Ø=90

(3.54)
70 Ø9
(2.75) (0.35)

Port D

62 Port C
(2.44)

Port A 89 107
(3.50) (4.21)

70
(2.75)

Port B
89 (3.50)
107 (4.21)

Low pressure filters

7
 Tanktop Mounted Return Line Filters

ETF Series
Indicator Details

Visual pressure indicator 48 Vdc electrical indicator 1.2 bar 250 VAC electrical indicator 1.2 bar
Code G2 Code S2/S3 Code S4
mm (inches) mm (inches) mm (inches)
38
31 Rotating
(1.49)
(1.22) part 360°
G1/8

30 (1.18) x30 (1.18)

67
(2.64)
(1.57)

44 (1.73)
74
40

HEX 24 C3 2 NO (2.91)
56
(2.20)
1 NC

32
10 10 (0.39)
(1.26) G1/8K
(0.39)

HEX 27 Fixed part

(1.06) G1/8K

Option Description Connection/Voltage Wiring Part number

G2 Visual indicator N/A N/A FMUG2FBMG02L

1.2 bar
Normally open contacts
FMUS2FBMG02L
Electrical indicator 42 Vdc
S2/S3 or
1.2 bar max Select either normally open (NO) FMUS3FBMG02L
or normally closed (NC)

S4 1 NC Normally closed contacts

Electrical indicator 250 VAC
2 NO FMUS4FBMG02L
1.2 bar max
3 C

8 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 1
Pressure Drop Curves

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.

ETF45 (Element length code 1) ETF60 (Element length code 2)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79
1.0 14.5 1.0 14.5
0.9 13.1 0.9 13.1
02Q 05Q 20Q 05Q 10Q
0.8 11.6 0.8 20Q 11.6
10Q
0.7 10.2 !p (PSID) 0.7 02Q 10.2

Δp (PSID)
0.6 8.7
!p (bar)

0.6 8.7

Δp (bar)
0.5 7.3 0.5 7.3
0.4 5.8 0.4 5.8
0.3 4.4 0.3 4.4
0.2 2.9 0.2 2.9
0.1 1.5 0.1 1.5
0.0 0 0.0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 0 25 50 75 100 125 150 175 200 225 250 275 300
Flow (l/min) Flow (l/min)

ETF90 (Element length code 3) ETF120 (Element length code 4)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79
1.0 14.5 1.0 14.5
0.9 13.1 0.9 13.1
02Q 05Q 10Q 02Q 05Q
0.8 11.6 0.8 11.6
0.7 10.2 0.7 10.2
10Q

Δp (PSID)
Δp (PSID)

8.7 0.6 8.7

Δp (bar)
Δp (bar)

0.6
20Q 0.5
0.5 7.3 7.3
0.4 5.8 0.4 5.8
20Q
0.3 4.4 0.3 4.4
0.2 2.9 0.2 2.9
0.1 1.5 0.1 1.5
0.0 0 0.0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 0 25 50 75 100 125 150 175 200 225 250 275 300
Flow (l/min) Flow (l/min)

ETF140 (Element length code 4A)

Flow (US GPM)

0 13 26 39 53 66 79
1.0 14.5
0.9 13.1
0.8 02Q 11.6
0.7 05Q 10.2
Δp (PSID)

0.6 8.7
Δp (bar)

10Q
0.5 7.3
0.4 5.8
0.3 4.4
20Q
0.2 2.9
0.1 1.5
0.0 0
0 25 50 75 100 125 150 175 200 225 250 275 300
Flow (l/min)

Note: All pressure drop curves above show total pressure drop. i.e. they are combined housing and element curves.

Low pressure filters

9
 Tanktop Mounted Return Line Filters

ETF Series
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
ETF210QBP2FG164 FK1230.Q010.BK16.GX16 60 ETF60 Length 2 10 Nitrile Plugged 1.6 Bar (22 Psi) 2xG1 (one port plugged) Diffuser type P 937950Q FC1230.Q010.XS
ETF220QBP2FG164 FK1230.Q020.BK16.GX16 60 ETF60 Length 2 20 Nitrile Plugged 1.6 Bar (22 Psi) 2xG1 (one port plugged) Diffuser type P 937951Q FC1230.Q020.XS
ETF310QBP2FG164 FK1240.Q010.BK16.GX16 90 ETF90 Length 3 10 Nitrile Plugged 1.6 Bar (22 Psi) 2xG1 (one port plugged) Diffuser type P 937952Q FC1240.Q010.XS
ETF320QBP2FG164 FK1240.Q020.BK16.GX16 90 ETF90 Length 3 20 Nitrile Plugged 1.6 Bar (22 Psi) 2xG1 (one port plugged) Diffuser type P 937953Q FC1240.Q020.XS
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Configurator example of an ETF Series filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
ETF 3 10Q B S2 F G16 1

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
ETF Housing Code Glassfibre media
ETF 1-45 1 Microglass III (for disposable elements)
ETF 1-60 2
ETF 1-90 3 Disposable element 02Q 05Q 10Q 20Q
ETF 1-120 4
ETF 1-140 4A

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 1.2 bar, G1/8 for dual head ports and TSR series G2 1.6 bar F
Pressure switch 42V, 1.2 bar setting, NO with G1/8 BSP S2 Other bypass settings on request
Pressure switch 42V, 1.2 bar setting, NC with G1/8 BSP S3
Pressure switch 250V, 1.2 bar setting NO/NC with G1/8 S4
No indicator, indicator ports L + R plugged P2
Other settings for indicators / gauges on request on request

Box 7 Box 8
Filter connection Options Spare elements
Ports Code Options Code Replacement Supersedes
G1"(BSP) (2 ports, one supplied as G16 No diffuser required 1 elements
plugged connection) Diffuser type P without perforated plate area 4 937969Q FC1220.Q002.XS
Diffuser with integrated hose connection on request 937970Q FC1220.Q005.XS
Magnets E 937948Q FC1220.Q010.XS
Diffuser type P and magnets F 937949Q FC1220.Q020.XS
Other combinations on request 937971Q FC1230.Q002.XS
Note: ETF filters are standard supplied without magnets and 937972Q FC1230.Q005.XS
including diffuser type P 937950Q FC1230.Q010.XS
937951Q FC1230.Q020.XS
937973Q FC1240.Q002.XS
Degree of filtration 937974Q FC1240.Q005.XS
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media 937952Q FC1240.Q010.XS
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
code 937953Q FC1240.Q020.XS
% efficiency, based on the above beta ratio (ßx) 937975Q FC1250.Q002.XS
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% 937976Q FC1250.Q005.XS
N/A N/A N/A N/A N/A 4.5 02Q 937954Q FC1250.Q010.XS
N/A N/A 4.5 5 6 7 05Q 937955Q FC1250.Q020.XS
N/A 6 8.5 9 10 12 10Q 937977Q FC1260.Q002.XS
6 11 17 18 20 22 20Q 937978Q FC1260.Q005.XS
937956Q FC1260.Q010.XS
937957Q FC1260.Q020.XS
937979Q FC1275.Q002.XS
937980Q FC1275.Q005.XS
937981Q FC1275.Q010.XS
Highlights Key (Denotes part number availability) 937982Q FC1275.Q020.XS
123 Item is standard
123 Item is standard green option
123 Item is semi standard
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

10 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 1
 Tanktop Mounted Return Line Filters

TTF Series MAX 500 I/min - 10 bar

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Low pressure filters

11
 Tanktop Mounted Return Line Filters

TTF Series
Features & Benefits

Features Advantages Benefits

10 bar rated filter Can be utilised for severe return line applications Reduced downtime due to premature
filter failures
Cast aluminium head Compact profile, lightweight and durable Less weight, smaller envelop and
cleaner appearance
LEIF® elements Patented element safeguards the use of Guaranteed quality of filtration
genuine parts Contributes to ISO 14001 certification
Magnetic pre-filtration Removes ferrous particles, even during bypass Improved fluid cleanliness levels
conditions Extended element life time
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
High level of customisation Dedicated system-matched solutions can be Improved integration of filter in system
easily made available combined with lower initial system costs
Full flow bypass with low hysteresis Reduction of bypass period due to low hysteresis Improved protection of system
Only a small part of the total flow is bypassing
the element
Standard or customised funnel Ensures that oil enters the tank under the oil level Significant reduction of oil foaming

Typical Applications

Waste management trucks

Mobile cranes
Power packs
Wheeled loaders
Drilling equipment

The Parker Filtration TTF Series

Return Line Filters
TTF tank top mounted return line filters feature pre-filtration by means
of a magnet column and a full flow bypass with low hysteresis.
Thanks to the “In-to-Out” filter principle, contaminated oil cannot leak
back into the system. TTF filters are available in versions capable
of handling flow rates up to 500 l/min. They can operate up to a
maximum working pressure of 10 bar. Optional filling port in filter
cover, second return port and customised diffusers can be specified.
Manifold type filter head (TSR Series) with four return ports is also
available.

12 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 2
Specification

Operation pressure: Filtration media:

Max. 10 bar. Microglass III and Ecoglass III for LEIF® elements.
Assembly: Also available 10µm cellulose and 40µm stainless steel mesh.
Tank top mounted. Element collapse rating:
Connections: 10 bar (ISO 2941)
Threaded BSP ports. Pressure indicator options:
Flanged ports on request. Setting 0.7 or 1.2 bar.
Manifold filter head type TSR on request Other settings on request.
available for flows up to 250 l/min. Visual pressure gauge.
Filter housing: Electrical pressure switch.
Aluminium head and cover. Options:
Seal material: Diffuser type P (straight pipe, no perforated plate area)
Nitrile, fluoroelastomer, neoprene. Diffuser type T (with closed diffuser end cap and with perforated plate
area, recommended when oil entry in reservoir is close to the reservoir
Operation temperature range: bottom or to ensure oil entry under the reservoir oil level)
-40 to +120°C.
Magnetic pack:
Bypass setting Standard. TTF400 and 500 are standard supplied without magnets
Opening pressure 0.8 / 1.5 or 2 bar.
Other settings on request. Filling port in cover: (optional)
Plugged.
Degree of filtration:
Determined by multipass test according to Filter element:
ISO 16889. LEIF® element with reusable metal element sleeve.
Optional conventional style element with steel end caps.
Flow fatigue characteristics: The LEIF® element is patented and safeguards the use of genuine parts.
Filter media is supported so that the Note: LEIF® element can be used with mineral and HEES type oils.
optimum fatigue life is achieved. For other fluids consult Parker Filtration.
LEIF® contributes to ISO 14001 quality standards.

TTF TSR 81
4x ISO228
G1/8” (BSP)
1 Free element clearance
Ø41
F

4
A A
5
12
137

6 B B
81

81

7
36

3.2 0.3
4xØ11
8
9a 64 Ø165 pitch
Ø102±1
10 Mounting hole
L

9b
11
H

12
Min. oil level
Standard length TSR2
Type H F L
13 TSR 120 185 201 150
Ø50
TSR 200 271 286 286
TSR 250 404 421 369
14 Dimensions in mm
TTF sealkit: No. 4+7+12
15
Ref. No. Description Ports A Ports B
16 1 4 Flange nut G1 (BSP) G11/4 (BSP)
3 1 Cover
4 1 Cover-seal SAE16 SAE20
5 1 Top-spring Note: All ports for return flow only
6 1 Insert
Type 1-125/2-170/2-230/2-300 Type 1-60/1-90/1-120 7 1 Insert-seal Technical specification
2-400 / 2-500 8 1 Element Max nominal return flow 120-200-250 l/min
9a 0-1 Indicator Max working pressure 10 bar
9b 0-3 Plug M10x1 Temperature range -30°C to +100°C
10 0-3 Unit-ring Bypass pressure 1,5 bar
11 1 Housing LEIF®-filtration ratio 2µ/5µ/10µ/20µ
12 1 Gasket Seals NBR
13 1 Sleeve Options Dipstick
14 1 Funnel/diffuser Indicator (electrical/visual)
15 1 O-ring
16 1 Bypass set
Low pressure filters
13
 Tanktop Mounted Return Line Filters

TTF Series
Specification (cont.)
Torqueload filter-cover Torqueload filter-tank
For TTF up to length 5 - 4 Nm max. For TTF up to length 5 - 15 Nm max.
For TTF length 6 and larger - 10 Nm max. For TTF length 6 and larger - 40 Nm max.

96 b
h1
d

K
Optional for TTF2 series
h

11/2” SAE-3000PSI
or G2” R1

ØD1

ØD
FP
H1

A
(Optional plugged
filling port)

R2
NOTE: TTF2 length 9 and 10 are

5*
standard supplied without magnets

R
A
Top view

Section A-A TTF length Type Connection Option h h1 !D !D1 H1 b R R1 R2 K FP

2 TTF60 131

Without Funnel 3 TTF90

G3/4, G1 28 73 !90 !93
175
68 60 63 10 4x!9 G1/2
4 TTF120 225
5 TTF125 325
6 TTF170 G1, G11/4, G11/2 223 G3/4
7 TTF230 303
36 92 90
8 TTF300 (G2 Single Port) !132 !136 508 83 87.5 12 4x!11
(46) (107) (96)
9 TTF400 (Dual Port) 523 (G1)
10 TTF500 (11/2 SAE) 563
Dimensions in mm

Torqueload filter-cover Torqueload filter-tank

For TTF up to length 5 - 4 Nm max. For TTF up to length 5 - 15 Nm max.
For TTF length 6 and larger - 10 Nm max. For TTF length 6 and larger - 40 Nm max.

96 b
h1
d

K
Optional for TTF2 series
h

11/2” SAE-3000PSI
or G2” R1

ØD1

ØD
FP A
(Optional plugged
H2

filling port)

R2
5*
R
H1
100

Top view
NOTE: TTF2 length 9 and 10 are
For TTF length 5 and larger For TTF length 2, 3 and 4 standard supplied without magnets

TTF length Type Connection Option h h1 !D !D1 H1 H2 b R R1 R2 K FP

2 TTF60 235
Section A-A 3 TTF90 280
G3/4, G1 28 73 !90 !93 68 60 63 10 4x!9 G1/2
4 TTF120 330
5 TTF125
With Funnel 420
6 TTF170 G1, G11/4, G11/2 305 G3/4
7 TTF230 305
36 92 90
8 TTF300 (G2 Single Port) !132 !136 510 83 87.5 12 4x!11
(46) (107) (96)
9 TTF400 (Dual Port) 525 (G1)
10 TTF500 (11/2 SAE) 575
Dimensions in mm

14 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 2
Pressure Drop Curves

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.

TSR120 (Element length code 1) TSR (Element length code 2)

Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 0 13 26 39 53 66
0.8 11.6 0.35 5.08
0.7 10.2 02Q
0.3 4.35
0.6 8.7
02Q 05Q 0.25 3.63
0.5 7.3 Δp (PSID) 05Q

Δp (PSID)
Δp (bar)

Δp (bar)
0.2 2.90
0.4 5.8
10Q 0.15 2.18
0.3 4.4
10Q
0.2 2.9 0.1 1.45
20Q 20Q
0.1 1.5 0.05 0.73

0 0 0 0
0 20 40 60 80 100 120 0 50 100 150 200 250
Flow (l/min) Flow (l/min)

TSR250 (Element length code 3)

Flow (US GPM)

0 13 26 39 53 66
0.35 5.08
02Q
0.3 4.35

0.25 3.63
05Q
Δp (PSID)
Δp (bar)

0.2 2.90

0.15 2.18
10Q
0.1 1.45
20Q
0.05 0.73

0 0
0 50 100 150 200 250
Flow (l/min)

TTF60 (Element length code 2) TTF90 (Element length code 3)

Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 0 8 16 24 31 39
2 29 1.4 20.3
02Q
02Q 1.2 17.4
1.5 21.8
1 14.5
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.8 11.6
1 14.5 05Q
05Q 0.6 8.7
10Q 10Q 5.8
0.5 7.3 0.4
20Q 0.2 2.9
20Q
0 0 0 0
0 20 40 60 80 100 0 30 60 90 120 150
Flow (l/min) Flow (l/min)

TTF120 (Element length code 4) TTF125 (Element length code 5)

Flow (US GPM) Flow (US GPM)

0 8 16 24 31 39 47 0 16 31 47
1.4 20.3 1.4 20.3
02Q 02Q
1.2 17.4 1.2 17.4

1 14.5 1 14.5
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.8 11.6 0.8 11.6

05Q
0.6 8.7 0.6 8.7
10Q 05Q
0.4 5.8 0.4 5.8
20Q 10Q
0.2 2.9 0.2 2.9
20Q
0 0 0 0
0 30 60 90 120 150 180 0 60 120 180
Flow (l/min) Flow (l/min)

Low pressure filters

15
 Tanktop Mounted Return Line Filters

TTF Series
Pressure Drop Curves (cont.)

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.

TTF170 (Element length code 6) TTF230 (Element length code 7)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 93 0 13 26 39 53 66 79 92 119
106
2.5 36.3 1 14.5
0.9 02Q 13.1
02Q 05Q
2 29 0.8 11.6
0.7 10.2

Δp (PSID)
1.5 21.8 Δp (PSID) 0.6 8.7

Δp (bar)
Δp (bar)

0.5 7.3
10Q
1 14.5 0.4 5.8
05Q 0.3 4.4
10Q
0.5 7.3 0.2 2.9
20Q
0.1 1.5
20Q
0 0 0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350 400 450
Flow (l/min) Flow (l/min)

TTF300 (Element length code 8) TTF400 (Element length code 9)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132 145

1.6 23.2 1.8 26.1
02Q 1.6 23.2
1.4 20.3
1.4 02Q 20.3
1.2 17.4
1.2 17.4
Δp (PSID)

1 14.5

Δp (PSID)
Δp (bar)

Δp (bar)

1 14.5
0.8 11.6 05Q 11.6
05Q 0.8
0.6 8.7
0.6 8.7
0.4
10Q 5.8 10Q 5.8
0.4
20Q
0.2 2.9 0.2 2.9
20Q
0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500 550
Flow (l/min) Flow (l/min)

TTF500 (Element length code 10)

Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 145 159

1.6 23.2
02Q
1.4 20.3
1.2 17.4
Δp (PSID)

1 14.5
Δp (bar)

0.8 11.6
0.6
05Q 8.7
10Q 5.8
0.4
0.2
20Q 2.9
0 0
0 50 100 150 200 250 300 350 400 450 500 550 600
Flow (l/min)

16 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 2
 TTF60 (Element length code 2) TTF90 (Element length code 3)
Cellulose & stainless steel media Cellulose & stainless steel media
Flow (US GPM) Flow (US GPM)

0 4 8 12 16 20 24 0 8 16 24 31
0.12 1.74 0.12 1.74

0.1 1.45 0.1 1.45

10C
10C
0.08 1.16 0.08 1.16

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.06 0.87 0.06 0.87

040W
0.04 0.58 0.04 0.58

040W
0.02 0.29 0.02 0.29

0 0 0 0
0 15 30 45 60 75 90 0 30 60 90 120
Flow (l/min) Flow (l/min)

TTF120 (Element length code 4) TTF125 (Element length code 5)

Cellulose & stainless steel media Cellulose & stainless steel media
Flow (US GPM) Flow (US GPM)

0 8 16 24 31 39 47 56 0 8 16 24 31 39
0.14 2.03 0.12 1.74
10C
0.12 1.74 0.1 1.45
0.1 1.45 10C 1.16
0.08
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.08 1.16
0.06 0.87
0.06 0.87
040W 0.58
0.04
0.04 0.58
040W
0.02 0.29 0.02 0.29

0 0 0 0
0 30 60 90 120 150 180 210 0 30 60 90 120 150
Flow (l/min) Flow (l/min)

TTF170 (Element length code 6) TTF230 (Element length code 7)

Cellulose & stainless steel media Cellulose & stainless steel media
Flow (US GPM) Flow (US GPM)

0 8 16 24 31 39 47 56 0 13 26 39 53 66 79
0.12 1.74 0.14 2.03

0.1 1.45 0.12 1.74

10C
10C 1.16
0.1 1.45
0.08
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.08 1.16
0.06 0.87
040W 0.06 0.87
0.04 0.58 040W
0.04 0.58
0.02 0.29 0.02 0.29

0 0 0 0
0 30 60 90 120 150 180 210 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

TTF300 (Element length code 8)

Cellulose & stainless steel media
Flow (US GPM)

0 13 26 39 53 66 79 92 106
0.14 2.03

0.12 1.74
10C
0.1 1.45
Δp (PSID)
Δp (bar)

0.08 1.16

0.06 0.87
040W 0.58
0.04

0.02 0.29

0 0
0 50 100 150 200 250 300 350 400
Flow (l/min)

Low pressure filters

17
 Tanktop Mounted Return Line Filters

TTF Series
Indicator Options

Indicator PS pressure switch Indicator PS NO/NC pressure switch

Protective cap Protective cover
with dual cable duct
for 1, 7-2, 3mm diameter cable

Normally open contacts

2 3
Amp 6.3x8
terminals
1
Switch Normally closed contacts

74
75

1 = COM.

55
2 = N.C. 24 A/F
58

3 = N.O.
27 A/F

9
9

M10x1 G1/8 (BSP)

Ø30.5 M10x1 Ø28

Specifications Specifications
Elec.rating 42V / 4A Elec.rating 42V / 2A
Thread connection M10x1 Thread connection G1/8
Elec.connection AMP 6.3x0.8 terminals + protective cap Elec.connection AMP terminal 6.3x0.8
Protection IP65 (with cap) terminals IP00 Protection IP65 (terminal IP00)
Code FMUS1EBMM10L (Switch) Switch type NO or NC
Code FMUS2EBMG02L (NO switch)
Indicator Connection / Filter Head Matrix FMUS3EBMG02L (NC switch)
Port(s) Filter head Indicator Thread
TTF ISO 228-G3/4" (BSP) (TTF length 2,3,4 and 5) M10
ISO 228-G1" (BSP) M10 Visual indicator 1.2 bar
ISO 228-G11/4" (BSP) (TTF length 7 and larger) M10 M10: code FMUG1EBPM10L
2xISO 228-G11/4" (BSP) (TTF length 7 and larger) G1/8" G1/8: code FMUG2EBPG02L
ISO 228-G11/2"(BSP) (TTF length 7 and larger) M10
2xISO 228-G11/2"(BSP) (TTF length 7 and larger) G1/8"
11/2" SAE-3000 PSI (TTF length 7 and larger) G1/8"
11/2" SAE-3000 PSI (2nd port) + G11/2" (TTF length 7 and larger) G1/8"
G2" (TTF length 7 and larger) G1/8"
G2" + G11/2" (TTF length 7 and larger) G1/8"
TSR ISO 228-G11/4" (BSP) + 2 Ports A ISO228-G1" (TSR only) G1/8"
2xISO 228-G11/4" (BSP) + 2 Ports A ISO228-G1" (TSR only) G1/8"
SAE20 + 2 Ports A SAE16 (TSR only) G1/8"
2xSAE20 + 2 Ports SAE16 (TSR only) G1/8"

Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
TTF310QLBP2EG121 TTF90-G3/4 TXWL3-10 B15 MM 90 TTF90 Length 3 10 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 None 937878Q TXWL3-10
TTF320QLBP2EG121 TTF90-G3/4 TXWL3-20 B15 MM 90 TTF90 Length 3 20 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 None 937877Q TXWL3-20
TTF510QLBP2EG161 TTF125-G1 TXWL3E-10 B15 MM 125 TTF125 Length 5 10 Nitrile Plugged 1.5 Bar (22 Psi) G1 None 937852Q TXWL3E-10
TTF520QLBP2EG161 TTF125-G1 TXWL3E-20 B15 MM 125 TTF125 Length 5 20 Nitrile Plugged 1.5 Bar (22 Psi) G1 None 937875Q TXWL3E-20
TTF610QLBP2EG203 TTF170-G11/4 TXWL4-10 T B15 MM 170 TTF170 Length 6 10 Nitrile Plugged 1.5 Bar (22 Psi) G11/4 Diffuser type T 937853Q TXWL4-10
TTF620QLBP2EG203 TTF170-G11/4 TXWL4-20 T B15 MM 170 TTF170 Length 6 20 Nitrile Plugged 1.5 Bar (22 Psi) G11/4 Diffuser type T 937874Q TXWL4-20
TTF810QLBP2EG243 TTF300-G11/2 TXWL5A-10 T B15 MM 300 TTF300 Length 8 10 Nitrile Plugged 1.5 Bar (22 Psi) G11/2 Diffuser type T 937855Q TXWL5A-10
TTF820QLBP2EG243 TTF300-G11/2 TXWL5A-20 T B15 MM 300 TTF300 Length 8 20 Nitrile Plugged 1.5 Bar (22 Psi) G11/2 Diffuser type T 937872Q TXWL5A-20
TTF1010QLBP2HG24A TTF500-G11/2 TXWL5C-10 T B20 MM NMG 500 TTF500 Length 10 10 Nitrile Plugged 2.0 Bar (29 Psi) G11/2 Diffuser type T 937857Q TXWL5C-10
TTF1010QLBP2HG24A TTF500-G11/2 TXWL5C-20 T B20 MM NMG 500 TTF500 Length 10 20 Nitrile Plugged 2.0 Bar (29 Psi) G11/2 Diffuser type T 937870Q TXWL5C-20
Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.

18 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 2
Ordering Information (cont.)

Product configurator
Configurator example of a TTF Series filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
TTF 9 05QL V S3 H L24 1
Configurator example of a TSR Series filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
TSR 3 20QL B G2 E 2G20 3

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
TTF Housing Code Element media Glass fibre
TSR TTF 1-60 2 Microglass III (for disposable elements)
TTF 1-90 3 Cellulose Ecoglass III (for Leif® elements) Wire mesh
TTF 1-120 4 Nom. rating Abs. rating
TTF 1-125 5 Disposable element 10C 02Q 05Q 10Q 20Q 040W
TTF 2-170 6 LEIF® element 02QL 05QL 10QL 20QL
TTF 2-230 7
TTF 2-300 8
TTF 2-400 9
TTF 2-500 10
TSR2-120 1
TSR2-200 2
TSR2-250 3

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 1.2 bar, M10x1 G1 0.8 bar B
Fluorelastomer V Pressure gauge, setting 1.2 bar, G1/8 for dual head ports and TSR series G2 1.5 bar E
Neoprene N Pressure switch 42V, 1.2 bar setting, NO/NC, M10x1 S1 2.0 bar for TTF series H
Pressure switch 42V, 1.2 bar setting, NO with G1/8 BSP S2 Blocked bypass X
Pressure switch 42V, 1.2 bar setting, NC with G1/8 BSP S3 Other bypass settings on request
Pressure switch 250V, NO/NC with G1/8 S4
Pressure switch 220V, NO/NC with M10 S5
No indicator, indicator ports not machined N
No indicator, indicator port R plugged P
No indicator, indicator ports L + R plugged P2
Other settings for indicators / gauges on request on request
Note: for all dual head ports and TSR series apply G1/8 connection for indicator

Box 7 Box 8
Filter connection Options
Ports Code Options Code
ISO 228-G3/4" (BSP) (TTF length 2,3,4 and 5) G12 No diffuser required 1
ISO 228-G1" (BSP) G16 Diffuser type T with perforated plate area 3
ISO 228-G11/4" (BSP) (TTF length 7 and larger) G20 Diffuser type P without perforated plate area 4
2xISO 228-G11/4" (BSP) (TTF length 7 and larger) 2G20 Diffuser with integrated hose connection for TTF
ISO 228-G11/2" (BSP) (TTF length 7 and larger) G24 lengths 2, 3 and 4 9
2xISO 228-G11/2" (BSP) (TTF length 7 and larger) 2G24 No magnets 5
11/2" SAE-3000 PSI (TTF length 7 and larger) L24 Dipstick 6
11/2" SAE-3000 PSI (2nd port) + G11/2" (TTF length 7 and larger) LD24 Plugged filling port 8
G2" (TTF length 7 and larger) G32 Diffuser type T and no magnets A
G2" + G11/2" (TTF length 7 and larger) GM32 Diffuser type P and no magnets B
ISO 228-G11/4" (BSP) + 2 Ports A ISO228-G1" (TSR only) G20 Diffuser type T, no magnets, plugged filling port C
2xISO 228-G11/4" (BSP) + 2 Ports A ISO228-G1" (TSR only) 2G20 Diffuser type P, no magnets, plugged filling port D
SAE20 + 2 Ports A SAE16 (TSR only) S20 Other combinations on request
2xSAE20 + 2 Ports SAE16 (TSR only) 2S20 Note: TTF size 2-400 and 2-500 are standard supplied
without magnets

Degree of filtration Highlights Key (Denotes part number availability)

Average filtration beta ratio ß (ISO 16889) / particle size µm [c] 123 Item is standard
Media
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000 123 Item is standard green option
code 123 Item is semi standard
% efficiency, based on the above beta ratio (ßx)
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% 123 Item is non standard
N/A N/A N/A N/A N/A 4.5 02Q/02QL Note: Standard items are in stock, semi standard items are available within
N/A N/A 4.5 5 6 7 05Q/05QL four weeks
N/A 6 8.5 9 10 12 10Q/10QL
6 11 17 18 20 22 20Q/20QL

Low Pressure Filters

19
 Tanktop Mounted Return Line Filters

TTF Series
Ordering Information (cont.)

Supersedes Spare Element table (TXWL & PXWL replaced by 900000 number)
TTF60 TXWL2-2 TXWL2-5 TXWL2-10 TXWL2-20
Part number spare element 937823Q 937880Q 937881Q 937882Q
TTF90 TXWL3-2 TXWL3-5 TXWL3-10 TXWL3-20
Part number spare element 937824Q 937879Q 937878Q 937877Q
TTF120 TXWL3D-2 TXWL3D-5 TXWL3D-10 TXWL3D-20
Part number spare element 937825Q 937825Q 937851Q 937876Q
TTF125 TXWL3E-2 TXWL3E-5 TXWL3D-10 TXWL3E-20
Part number spare element 937826Q 937849Q 937852Q 937875Q
TTF170 TXWL4-2 TXWL4-5 TXWL4-10 TXWL4-20
Part number spare element 937827Q 937848Q 937853Q 937874Q
TTF230 TXWL5-2 TXWL5-5 TXWL5-10 TXWL5-20
Part number spare element 937828Q 937847Q 937854Q 937873Q
TTF300 TXWL5A-2 TXWL5A-5 TXWL5A-10 TXWL5A-20
Part number spare element 937829Q 937846Q 937855Q 937872Q
TTF400 TXWL5B-2 TXWL5B-5 TXWL5B-10 TXWL5B-20
Part number spare element 937830Q 937845Q 937856Q 937871Q
TTF500 TXWL5C-2 TXWL5C-5 TXWL5C-10 TWXL5C-20
Part number spare element 937831Q 937844Q 937857Q 937870Q
TSR120 PXWL3-2 PXWL3-5 PXWL3-10 PXWL3-20
Part number spare element 937886Q 937889Q 937892Q 937895Q
TSR200 PXWL4-2 PXWL4-5 PXWL4-10 PXWL4-20
Part number spare element 937887Q 937890Q 937893Q 937896Q
TSR250 PXWL4A-2 PXWL4A-5 PXWL4A-10 PXWL4A-20
Part number spare element 937888Q 937891Q 937894Q 937897Q

Supersedes Spare Element table (TXW & TXX replaced by 900000 number)
TTF60 TXX2-10-B TXW2-2-B TXW2-5-B TXW2-10-B TXW2-20-B ST2-40-B
Part number spare element 937721 937751Q 937754Q 937787Q 937790Q 937820
TTF90 TXX3-10-B TXW3-2-B TXW3-5-B TXW3-10-B TXW3-20-B ST3-40-B
Part number spare element 937722 937750Q 937755Q 937786Q 937791Q 937819
TTF120 TXX3D-10-B TXW3D-2-B TXW3D-5-B TXW3D-10-B TXW3D-20-B ST3D-40-B
Part number spare element 937723 937749Q 937756Q 937785Q 937792Q 937818
TTF125 TXX3E-10-B TXW3E-2-B TXW3E-5-B TXW3E-10-B TXW3E-20-B ST3E-40-B
Part number spare element 937724 937748Q 937757Q 937748Q 937793Q 937817
TTF170 TXX4-10-B TXW4-2-B TXW4-5-B TXW4-10-B TXW4-20-B ST4-40-B
Part number spare element 937725 937747Q 937758Q 937783Q 937794Q 937816
TTF230 TXX5-10-B TXW5-2-B TXW5-5-B TXW5-10-B TXW5-20-B ST5-40-B
Part number spare element 937726 937746Q 937759Q 937782Q 937795Q 937815
TTF300 TXX5A-10-B TXW5A-2-B TXW5A-5-B TXW5A-10-B TXW5A-20-B ST5A-40-B
Part number spare element 937727 937745Q 937760Q 937781Q 937796Q 937814

20 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 2
 Tanktop Mounted Return Line Filters

BGT Series MAX 2400 I/min - 10 bar

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Low pressure filters

21
 Tanktop Mounted Return Line Filters

BGT Series
Features & Benefits

Features Advantages Benefits

10 bar rated filter Can be utilised for severe return line applications Reduced downtime due to premature
filter failures
Cast aluminium head Compact profile, lightweight and durable Less weight, smaller envelop and
cleaner appearance
LEIF® elements Patented element safeguards the use of Guaranteed quality of filtration
genuine parts Contributes to ISO 14001 certification
Magnetic pre-filtration Removes ferrous particles, even during bypass Improved fluid cleanliness levels
conditions Extended element life time
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
High level of customisation Dedicated system-matched solutions can be Improved integration of filter in system
easily made available combined with lower initial system costs
Full flow bypass with low hysteresis Reduction of bypass period due to low hysteresis Improved protection of system
Only a small part of the total flow is bypassing
the element
Standard or customised funnel Ensures that oil enters the tank under the oil level Significant reduction of oil foaming

Typical Applications

Mobile cranes
Excavators
Deck cranes
Fire fighting equipment
Hydraulic presses
Waste balers
Industrial power units
Fork lift trucks

The Parker Filtration BGT Series Tank Mounted

Return Line Filters.
BGT tanktop mounted return line filters feature pre-filtration by means
of a magnet column and a full flow bypass with low hysteresis.
Thanks to the ‘In-to-Out’ filter principle, contaminated oil cannot leak
back into the system. BGT Filters are available in versions capable
of handling flow rates up to 2400 l/min. They can operate with a
maximum working pressure of 10 bar. LEIF® elements are available
for environment-friendly filtration for versions up to 1500 l/min.

22 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 3
Specification

Operating pressure: Element collapse rating:

Max. 10 bar. 10 bar (ISO 2941).
Assembly: Pressure indicator options:
Tank top mounted. Setting 0.7 or 1.2 bar.
Connections: Other settings on request.
Flanges SAE2”, 3”. Visual pressure gauge.
Threaded ports and multiple ports available. Electrical pressure switch.
Filter housing: Options:
Aluminium head and cover. Diffuser type P (straight pipe, no perforated plate area)
Diffuser type T (with closed diffuser end cap and with perforated plate
Seal material: area, recommended when oil entry in reservoir is close to the reservoir
Nitrile, fluoroelastomer, neoprene. bottom or to ensure oil entry under the reservoir oil level)
Operating temperature range: Magnetic pack:
-40° to +120°C. Standard.
Bypass setting Filling port in cover (optional):
Opening pressure 0.8 / 1.5 or 2 bar. Plugged G11/2.
Other settings on request.
Filter element:
Degree of filtration: LEIF® element with reusable metal element sleeve.
Determined by multipass test according to ISO 16889. Conventional style element with steel end caps.
Flow fatigue characteristics: The LEIF® element is patented and safeguards the use of
Filter media is supported so that the optimum fatigue life is achieved. genuine parts.
Filtration media: Note:
Microglass III and Ecoglass III for LEIF® elements. LEIF® element can be used with mineral and HEES type oils.
Also available 10µm Cellulose and 40µm stainless steel mesh. For other fluids consult Parker Filtration.
LEIF® contributes to ISO 14001 quality standards.

BGT-3 Length 11 and 12 (LEIF® version) BGT-3 (LEIF® version) BGT-4 (conventional element)
Ref. No. Description
1 1 Nut
2 1 Washer 1 1
3 1 Cover 2 2
4 1 Cover-seal 3
5 1 Top-spring 3

6 1 Housing 4 4
7 1 Insert-seal
5 5
8 1 Plug M10x1
9 1 Bonded seal
10 1 Insert
6
11 1 LEIF® element
7 6
12 1 Element sleeve
8
13 1 Gasket
9 7
14 1 O-ring
15 1 Bypass set 10 8
16 1 Diffuser 9
11
10
BGT-4 Length 13 and larger (conventional element)
11
Ref. No. Description
12
1 1 Nut
12
2 1 Washer
3 1 Cover 13
4 1 Cover-seal
5 1 Top-spring 13
6 1 Housing
7 1 Insert-seal
8 1 Plug M10x1 14
Bonded seal 14
9 1
10 1 Insert
11 1 Element seal
12 1 Element
15
13 1 O-ring
14 1 O-ring 15
15 1 Bypass set
16
16 1 Diffuser 16

Low pressure filters

23
 Tanktop Mounted Return Line Filters

BGT Series
Specification (cont.)
BGT-3 with diffuser
Filter - tank
torque-load 45 Nm
Cover - house
torque-load 30 Nm B

M12 Plug M10x1

A
d)
N (P

B
ØG

ØD
L

C
F
A

E
M

K ØU
B
ØQ A A
View A-A
Flange SAE 2”
P

Used for BGT 3S with:

ØR
S

- 2” SAE flanged single port connection

H
50±0.5 50±0.5

M12
W

d)
N (P
L

ØV
M

View B-B
K without diffuser

C C
ØQ View C-C
Used for BGT 3S with: Flange SAE 2” Dimensions in mm
P

- Dual port connection

1x2” SAE flange + 2x11/4” SAE flanges BGT
length B C D E F G H1 L K M N(Pd) P Q R S U V W Kg.
+0.5
11 BGT390 139 59 50 3 59 35 325 43 78 105 R107.5 14 13 16 3 165.5 0 165 120 7.2
12 BGT500 515 8.6
+0.5
Dual port connection (131) (55) (55) (110) (15) (166 0 )

BGT-3 without diffuser

Filter - tank
torque-load 45 Nm
Cover - house
torque-load 30 Nm B

M12
Plug M10x1

d) A
N (P
B
L

ØG

ØD

A
F

E
M

K
B ØA
ØQ A A
View A-A
Flange SAE 2”
P

Used for BGT 3S with:

ØR
S

- 2” SAE flanged single port connection

H1

50±0.5 50±0.5

M12

d)
N (P

View B-B
L

without diffuser
M

Dimensions in mm

K BGT
length A B C D E F G H1 L K M N(Pd) P Q R S Kg.
C C
ØQ View C-C +0.5
Used for BGT 3S with: Flange SAE 2” 11 BGT390 165.5 0 139 59 50 3 59 35 325 43 78 105 R107.5 14 13 16 3 7.2
P

- Dual port connection

1x2” SAE flange + 2x11/4” SAE flanges
12 BGT500 515 8.6
Dual port connection (166.5+0.5
0 ) (131) (55) (55) (110) (15)

24 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 3
BGT-4 with diffuser

A Filter - tank
Plug M10x1 torque-load 45 Nm
Cover - house B

B
torque-load 30 Nm
ØF

ØD

M16
C

A
E

d)
L N (P

ØU

M
K

A B A
Flange SAE 3”
H

View A-A ØQ
P
S
W

ØR

ØV BGT
length B C ØD E ØF H K L M N(Pd) P ØQ ØR S ØU ØV W Kg.
View B-B
with diffuser 13 BGT600 425 20.5
14 BGT800 535 23.0
+0.5
15 BGT1000 178 67 80 37 40 640 106.4 62 170 R147.5 20 14 20 4 240.5 0 240 170 25.5
16 BGT1500 920 30.0
17 BGT2000 1200 37.0
18 BGT2400 1200 37.0
Note: dimensions of BGT-2400 identical to BGT-2000. Dimensions in mm

Filter - tank

BGT-4 without diffuser Cover - house

torque-load 45 Nm
B
torque-load 30 Nm

M16
Plug M10x1 A
d)
N (P
B
ØD

L
ØF

A
E

ØA
Flange SAE 3” A B A
View A-A ØQ
P
H1

ØR

BGT
length ØA B C ØD E ØF H1 K L M N(Pd) P ØQ ØR S Kg.
13 BGT600 385 20.5
View B-B 14 BGT800 495 23.0
without diffuser
15 BGT1000 239.5+0.5
0 178 67 80 37 40 598 106.4 62 170 R147.5 20 14 20 4 25.5
16 BGT1500 878 30.0
17 BGT2000 1143 37.0
18 BGT2400 1143 37.0
Note: dimensions of BGT-2400 identical to BGT-2000. Dimensions in mm

Low pressure filters

25
 Tanktop Mounted Return Line Filters

BGT Series
Specification (cont.)

BGT F11/4 manifold type - with diffuser

31.8

Cover - house Filter - tank

torque-load 30 Nm torque-load 45 Nm
18.2 ±200
A 150
M14

145
66.7

40.5
R16

Ø13
Ø32
50

A
M8 1 2 / ”-SAE-6000PSI
R1
View A-A 47
.5
+0.5
Tankhole Ø240.5 0

Indicator

150
H

11/4”-SAE-6000PSI (3x)
Ø14
92

BGT
length H
190

20

13 BGT600L 420
4

14 BGT800L 530
Ø20
15 BGT1000L 636
16 BGT1500L 915

Ø240
17 BGT2000L 1180
18 BGT2400L 1180
with diffuser Note: dimensions of BGT-2400 identical to BGT-2000
Dimensions in mm

BGT F11/4 manifold type - without diffuser

31.8

Cover - house Filter - tank

torque-load 30 Nm torque-load 45 Nm
18.2 ±200
A 150
M14

145
66.7

40.5

R16
Ø13
Ø32
50

A
M8 / ”-SAE-6000PSI
1 2

R1
View A-A 47
.5
+0.5
Tankhole Ø240.5 0

Indicator
150
H

BGT
length H
11/4”-SAE-6000PSI (3x)
13 BGT600L 385
Ø14
92 14 BGT800L 495
15 BGT1000L 598
20

16 BGT1500L 878
17 BGT2000L 1143
4

18 BGT2400L 1143
without diffuser Note: dimensions of BGT-2400 identical to BGT-2000 Ø20
Dimensions in mm

26 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 3
Indicator Options

Indicator PS pressure switch Indicator PS NO/NC pressure switch

Protective cap Protective cover
with dual cable duct
for 1, 7-2, 3mm diameter cable
Normally open contacts

2 3
Amp 6.3x8
terminals
1
Switch Normally closed contacts

74
75

55
1 = COM.
2 = N.C. 24 A/F
58

3 = N.O.
27 A/F

9
9

M10x1 G1/8 (BSP)

Ø30.5 M10x1 Ø28

Specifications
Elec.rating 42V / 4A
Specifications
Thread connection M10x1 Elec.rating 42V / 2A
Elec.connection AMP 6.3x0.8 terminals + protective cap Thread connection G1/8
Protection IP65 (with cap) terminals IP00 Elec.connection AMP terminal 6.3x0.8
Code FMUS1EBMM10L (Switch) Protection IP65 (terminal IP00)
Switch type NO or NC
Indicator Connection / Filter Head Matrix Code FMUS2EBMG02L (NO switch)
Port(s) Filter head Indicator Thread FMUS3EBMG02L (NC switch)
2" SAE BGT length 11 and 12 M10
3" SAE BGT Length 13 and larger M10
1x2"SAE Flanged + 2 x 11/4" SAE Flanged for BGT Length 11 and 12 G1/8" Visual indicator 1.2 bar
3x11/4" SAE Flanges + 1x 1/2" SAE for BGT Length 13 and larger M10 M10 code FMUG1EBPM10L
G1/8 code FMUG2EBPG02L

Pressure Drop Curves

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.
Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.

BGT Empty Housing 2”SAE (Length code 11 and 12) BGT390 (Element length code 11)
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 145 0 26 53 79 106 132 159 185

0.04 0.58 1.2 17.4
02Q
1 14.5
0.03
0.8 11.6
Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.02 0.29 0.6 8.7

05Q
0.4 5.8
0.01 10Q
0.2 2.9
20Q
0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 550 0 100 200 300 400 500 600 700
Flow (l/min) Flow (l/min)

BGT500 (Element length code 12)

Flow (US GPM)

0 26 53 79 106 132 159 185

1.2 17.4

1 14.5
02Q
0.8 11.6
Δp (PSID)
Δp (bar)

0.6 8.7
05Q
0.4 5.8
10Q
0.2 2.9
20Q
0 0
0 100 200 300 400 500 600 700
Flow (l/min)

Low pressure filters

27
 Tanktop Mounted Return Line Filters

BGT Series
Pressure Drop Curves (cont.)

BGT Empty Housing 3”SAE (Length 13 and larger) BGT600 (Element length code 13)
Flow (US GPM) Flow (US GPM)

0 53 106 159 211 264 317 370 423 476 529 0 26 53 79 106 132 159 185 211 238
0.04 0.58 1.2 17.4
02Q
1 14.5
0.03
0.8 11.6

Δp (PSID)
Δp (PSID)
Δp (bar)

Δp (bar)
0.02 0.29 0.6 05Q 8.7

0.4 10Q 5.8

0.01
0.2 2.9
20Q
0 0 0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 0 100 200 300 400 500 600 700 800 900
Flow (l/min) Flow (l/min)

BGT800 (Element length code 14) BGT1000 (Element length code 15)
Flow (US GPM) Flow (US GPM)

0 53 106 159 211 264 317 0 53 106 159 211 264 317 370
1.2 17.4 1.2 17.4
02Q
1 14.5 1 14.5
02Q
0.8 11.6 0.8 11.6
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.6 8.7 0.6 8.7

05Q 05Q
0.4 5.8 0.4 5.8
10Q 10Q
0.2 2.9 0.2 2.9
20Q 20Q
0 0 0 0
0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 1400
Flow (l/min) Flow (l/min)

BGT1500 (Element length code 16) BGT2000 (Element length code 17)
Flow (US GPM) Flow (US GPM)

0 53 106 159 211 264 317 370 423 0 106 211 317 423 529 635
1.2 17.4 1.2 17.4
02Q 02Q
1 14.5 1 14.5

0.8 11.6 0.8 11.6

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.6 8.7 0.6 8.7

05Q 05Q
0.4 5.8 0.4 5.8
10Q 10Q
0.2 2.9 0.2 2.9
20Q 20Q
0 0 0 0
0 200 400 600 800 1000 1200 1400 1600 0 400 800 1200 1600 2000 2400
Flow (l/min) Flow (l/min)

BGT2400 (Element length code 18)

Flow (US GPM)

0 106 211 317 423 529 635

1.2 17.4
02Q
1 14.5

0.8 11.6
Δp (PSID)
Δp (bar)

0.6 8.7
05Q
0.4 5.8
10Q
0.2 2.9
20Q
0 0
0 400 800 1200 1600 2000 2400
Flow (l/min)

28 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 3
Pressure Drop Curves (cellulose and stainless steel media)

BGT390 (Element length code 11) BGT390 (Element length code 11)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 0 26 53 79 106 132

0.07 1.02 0.05 0.73

0.06 0.87
0.04 0.58
0.05 0.73
10C 10C

Δp (PSID)

Δp (PSID)
0.03 0.44
Δp (bar)

Δp (bar)
0.04 0.58
040W 040W
0.03 0.44 0.02 0.29
0.02 0.29
0.01 0.15
0.01 0.15

0 0 0 0
0 100 200 300 400 500 0 100 200 300 400 500
Flow (l/min) Flow (l/min)

BGT600 (Element length code 13) BGT800 (Element length code 14)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185 211

0.07 1.02 0.06 0.87
0.06 0.87
0.05 0.73
10C
0.05 0.73 10C
0.04 0.58
Δp (PSID)

Δp (PSID)
Δp (bar)

0.04 0.58
Δp (bar)

040W 0.03 0.44

0.03 0.44 040W
0.02 0.29 0.02 0.29

0.01 0.15 0.01 0.15

0 0 0
0 100 200 300 400 500 600 700 0
0 100 200 300 400 500 600 700 800
Flow (l/min) Flow (l/min)

BGT1000 (Element length code 15) BGT1500 (Element length code 16)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 264 0 53 106 159 211 264 317 370 423
0.06 0.87 0.07 1.02
0.06 0.87
0.05 0.73
10C 10C
0.05 0.73
0.04 0.58
Δp (PSID)
Δp (PSID)

Δp (bar)

0.04
Δp (bar)

0.58
0.03 0.44 040W
040W 0.03 0.44
0.02 0.29 0.02 0.29

0.01 0.15 0.01 0.15

0 0 0 0
0 100 200 300 400 500 600 700 800 900 1000 0 200 400 600 800 1000 1200 1400 1600
Flow (l/min) Flow (l/min)

BGT2000 (Element length code 17)

Cellulose & Stainless steel media
Flow (US GPM)

0 53 106 159 211 264 317 370 423 475 528 581
0.07 1.02

0.06 0.87

0.05 10C
0.73
Δp (PSID)
Δp (bar)

0.04 0.58
040W
0.03 0.44

0.02 0.29

0.01 0.15

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200
Flow (l/min)

Cellulose and stainless steel media

Example: BGT2000 Filter Element Length 17 - cellulose and stainless steel media
Low pressure filters
29
 Tanktop Mounted Return Line Filters

BGT Series
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
BGT1210QLBPER323 BGTS500-S2 TXWL8C-10 T B15 M 500 BGT500 Length 12 10 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937859Q TXWL8L-10
BGT1220QLBPER323 BGTS500-S2 TXWL8C-20 T B15 M 500 BGT500 Length 12 20 Nitrile Plugged 1.5 Bar (22 Psi) 2"SAE-3000 PSI Diffuser type T 937868Q TXWL8L-20
BGT1510QLBPER483 BGTS1000-S3 TXWL12-10 T B15 M 1000 BGT1000 Length 15 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937862Q TXWL12-10
BGT1520QLBPER483 BGTS1000-S3 TXWL12-20 T B15 M 1000 BGT1000 Length 15 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937865Q TXWL12-20
BGT1710QBPER483 BGTS2000-S3 TXW14-10 T B15 M 2000 BGT2000 Length 17 10 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937772Q TXW14-10B
BGT1720QBPER483 BGTS2000-S3 TXW14-20 T B15 M 2000 BGT2000 Length 17 20 Nitrile Plugged 1.5 Bar (22 Psi) 3"SAE-3000 PSI Diffuser type T 937805Q TXW14-20B
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Configurator examples filter including LEIF® element
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
BGT 15 05QL B S1 E R48 C

Configurator examples filter including conventional element

Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
BGT 18 02Q B S4 E 3R20 4

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
BGT Housing Code Element media Glass fibre
BGT390 11 Microglass III (for disposable elements)
BGT500 12 Cellulose Ecoglass III (for Leif® elements) Wire mesh
BGT600 13 Nom. rating Abs. rating
BGT800 14 Disposable element 10C 02Q 05Q 10Q 20Q 040W
BGT1000 15 LEIF® element 02QL 05QL 10QL 20QL
BGT1500 16
BGT2000 17
BGT2400 18

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 1.2 bar, M10x1 G1 0.8 bar B
Fluorelastomer V Pressure gauge, setting 1.2 bar, G1/8 for dual port head and TSR series G2 1.5 bar E
Neoprene N Pressure switch 24V, 1.2 bar setting, NO/NC, M10x1 S1 2.0 bar for BGT-3 series
Pressure switch 24V, 1.2 bar setting, NO with G1/8 BSP S2 (length 11 and 12) H
Pressure switch 24V, 1.2 bar setting, NC with G1/8 BSP S3 Blocked bypass X
Pressure switch 250V, NO/NC with G1/8 S4 Other bypass settings on request
Pressure switch 220V, NO/NC with M10 S5
No indicator, indicator ports not machined N
No indicator, indicator port R plugged P
No indicator, indicator ports L + R plugged P2
Other settings for indicators / gauges on request on request
Note: For all dual head ports for BGTS apply G1/8 connection for indicators

Box 7 Box 8
Filter connection Options
Ports Code Options Code
2" SAE BGT length 11 and 12 R32 No diffuser required 1
3" SAE BGT Length 13 and larger R48 Diffuser type T with perforated plate area 3
1x2" SAE Flanged + 2 x 11/4" SAE Flanged for BGT Length 11 and 12 R32M Diffuser type P without perforated plate area 4
3x11/4" SAE Flanges + 1x 1/2" SAE for BGT Length 13 and larger 3R20 Diffuser with integrated hose connection on request
No magnets 5
Dipstick 6
Plugged filling port 8
Highlights Key (Denotes part number availability) Diffuser type T and no magnets A
Diffuser type P and no magnets B
123 Item is standard
Diffuser type T, no magnets, plugged filling port C
123 Item is standard green option
Diffuser type P, no magnets, plugged filling port D
123 Item is semi standard
Other combinations on request
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

30 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 3
Ordering Information (cont.)

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
code
% efficiency, based on the above beta ratio (ßx)
50.0% 90.0% 98.7% 99.0% 99.5% 99.9%
N/A N/A N/A N/A N/A 4.5 02Q/02QL
N/A N/A 4.5 5 6 7 05Q/05QL
N/A 6 8.5 9 10 12 10Q/10QL
6 11 17 18 20 22 20Q/20QL

Supersedes spare element table

BGT390 TXWL8A-2 TXWL8A-5 TXWL8A-10 TXWL8A-20
Part number spare element 937832Q 937843Q 937858Q 937869Q
BGT500 TXWL8C-2 TXWL8C-5 TXWL8C-10 TXWL8C-20
Part number spare element 937833Q 937842Q 937859Q 937868Q
BGT600 TXWL10-2 TXWL10-5 TXWL10-10 TXWL10-20
Part number spare element 937834Q 937841Q 937860Q 937867Q
BGT800 TXWL11-2 TXWL11-5 TXWL11-10 TXWL11-20
Part number spare element 937835Q 937840Q 937861Q 937866Q
BGT1000 TXWL12-2 TXWL12-5 TXWL12-10 TXWL12-20
Part number spare element 937836Q 937839Q 937862Q 937865Q
BGT1500 TXWL13-2 TXWL13-5 TXWL13-10 TXWL13-20
Part number spare element 937837Q 937838Q 937863Q 937864Q

Supersedes spare element table

BGT390 TXX8A-10-B TXW8A-2-B TXW8A-5-B TXW8A-10-B TXW8A-20-B ST8A-40-B
Part number spare element 937728 937742Q 937763Q 937778Q 937799Q 937813
BGT500 TXX8C-10-B TXW8C-2-B TXW8C-5-B TXW8C-10-B TXW8C-20-B ST8C-40-B
Part number spare element 937729 937741Q 937764Q 937777Q 937800Q 937812
BGT600 TXX10-10-B TXW10-2-B TXW10-5-B TXW10-10-B TXW10-20-B ST10-40-B
Part number spare element 937730 937740Q 937765Q 937776Q 937801Q 937811
BGT800 TXX11-10-B TXW11-2-B TXW11-5-B TXW11-10-B TXW11-20-B ST11-40-B
Part number spare element 937731 937739Q 937766Q 937775Q 937802Q 937810
BGT1000 TXX12-10-B TXW12-2-B TXW12-5-B TXW12-10-B TXW12-20-B ST12-40-B
Part number spare element 937732 937738Q 937767Q 937774Q 937803Q 937809
BGT1500 TXX13-10-B TXW13-2-B TXW13-5-B TXW13-10-B TXW13-20-B ST13-40-B
Part number spare element 937733 937737Q 937768Q 937773Q 937804Q 937808
BGT2000 TXX14-10-B TXW14-2-B TXW14-5-B TXW14-10-B TXW14-20-B ST14-40-B
Part number spare element 937734 937736Q 937769Q 937772Q 937805Q 937807
BGT2400 - TXWH14-2-B TXWH14-5-B TXWH14-10-B TXWH14-20-B -
Part number spare element 937735Q 937770Q 937771Q 937806Q

Low Pressure Filters

31
 In-Tank Mounted Return Line Filters

IN-AGB Series MAX 2400 I/min

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Low pressure filters

33
 In-Tank Mounted Return Line Filters

IN-AGB Series
Features & Benefits

Features Advantages Benefits

Filter integrated in tank Compact low cost solution Suitable for extreme heavy duty
Filter protected by reservoir applications or hazardous environments
No tank top parts contributes to
improved esthetical design
LEIF® elements Patented element safeguards the use of genuine Guaranteed quality of filtration
parts Contributes to ISO 14001 certification
Magnetic pre-filtration Removes ferrous particles, even during bypass Improved fluid cleanliness levels
conditions Extended element life time
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
High level of customisation Dedicated system-matched solutions can be Improved integration of filter in system
easily made available combined with lower initial system costs
Full flow bypass with low hysteresis Reduction of bypass period due to low hysteresis Improved protection of system
Only a small part of the total flow is bypassing
the element
Standard or customised funnel Ensures that oil enters the tank under the oil level Significant reduction of oil foaming

Typical Applications

Agricultural machines
Articulated dump trucks
Forestry equipment
Wheeled loaders
Lubrication systems
Excavators

The Parker Filtration IN-AGB

In-Tank Mounted Return Line Filters.
The low-cost, high-performance return line IN-AGB filter
features Q3 filter media, a bypass construction with low
hysteresis, magnetic pre-filtration and a high dirt-holding
capacity. The range is capable of handling flow rates from
30 l/min up to 2400 l/min. LEIF® elements are available for flow
rates up to 1500 l/min, meeting the most stringent demands
for environmentally-friendly filtration and offering protection
against poor quality pirate elements.

34 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 4
Specification

Assembly: Filtration media:

Inside tank. Microglass III, Ecoglass III for LEIF® elements
Seal material: Also available 10µm Cellulose and 40µm stainless steel mesh.
Nitrile, fluoroelastomer, neoprene. Element collapse rating:
Operating temperature range: 10 bar (ISO 2941).
-40° to +120°C. Options:
Bypass setting: Diffuser type P (straight pipe, no perforated plate area)
0.8/1.5 and 2.0 bar. Diffuser type T (with closed diffuser end cap and with perforated plate area,
Other settings on request. recommended when oil entry in reservoir is close to the reservoir bottom or
to ensure oil entry under the reservoir oil level)
Degree of filtration:
Determined by multipass test according to Magnetic pack:
ISO 16889. Standard.
Note: IN-AGB 2-400 and 2-500 are standard supplied without magnets.
Flow fatigue characteristics:
Filter media is supported so that the optimal Filter element:
fatigue life is achieved. LEIF® element with reusable metal element sleeve.
Optional conventional style element with steel end caps.
The LEIF® element is patented and safeguards the use of genuine parts.
Note: LEIF® element can be used with mineral and HEES type oils.
For other fluids consult Parker Filtration.
LEIF® contributes to ISO 14001 quality standards.

Insert-AGB LEIF® 3 series 1-3 Series 4 Series

Ref. No. Description
1 1 Top-spring
2 1 Insert 1 1
3 1 Insert-seal
4 1 LEIF® Element
5 1 Sleeve 2
2

6 1 Gasket 3 3
7 1 O-ring
8 1 Bypass set 4
9 1 Diffuser 4
5

Insert-AGB LEIF® 4 series 5

6

Ref. No. Description

7
1 1 Top-spring
2 1 Insert
3 1 Insert-seal
6
4 1 Inner sleeve
5 1 LEIF®-element
7
6 1 Outer sleeve 8
7 1 O-ring
8 1 O-ring
9 1 Bypass set
10 1 Diffuser 9
8

10

Low pressure filters

35
 In-Tank Mounted Return Line Filters

IN-AGB Series
Specification (cont.)
A
C
B
d D

p
s

G
F
8
0.
45°
y

E
h
x

Mounting arrangement
H

INAGB
Length Type A B H h d x y s p C D E F G
0 IN30 87 79 122 35 20 4 6 45 20 88 85 80 4 12
2 IN60
1 Series

87 79 173 35 20 4 6 45 20 88 85 80 4 12
3 IN90 87 79 217 35 20 4 6 45 20 88 85 80 4 12
4 IN120 87 79 267 35 20 4 6 45 20 88 85 80 4 12
5 IN125 87 79 381 35 20 4 6 45 20 88 85 80 4 12
without diffuser 6 IN170 125 116 284 48 25 5 8 77 42 126 122 117 5 15
7 IN230
2 Series

125 116 360 48 25 5 8 77 42 126 122 117 5 15

8 IN300 125 116 559 48 25 5 8 77 42 126 122 117 5 15
9 IN400 125 116 579 48 25 5 8 77 42 126 122 117 5 15
Ø230 Ø231±0.2
10 IN500 125 116 599 48 25 5 8 77 42 126 122 117 5 15
Ø216
12.5

Ø227±0.2
Ø20
11A IN270
3 Series

150 138 325 62 30 7 12 100 55 151 149 139 5 18

3.2
11 IN390 150 138 407 62 30 7 12 100 55 151 149 139 5 18
12 IN500 150 138 599 62 30 7 12 100 55 151 149 139 5 18
60

8
0. Dimensions in mm
45°
146

12.5

Ø217±0.2

IN-AGB 3 IN-AGB 4
H

Ø193 Ø260
15
°
v
u

3.2
0.8

R±0.1
min.12

ØM
Ø203
3.2

ØQ+1.0-1.5
ØM
ØQ 0-0.5
without diffuser
K

INAGB
Length Type K L M U V Q R
11A IN270 324 110 175 106 55 178
3 Series

INAGB 11 IN390
Length Type H 364 110 175 106 55 178
L

12 IN500(3) 554 125 175 106 55 178

13 IN600 543
14 IN800 653 13 IN600 445 183 239 145 60 250.5 2.5
15 IN1000 758 with 14 IN800 555 183 239 145 60 250.5 2.5
4 Series

16 IN1500 1038 diffuser 15 IN1000 660 183 239 145 60 250.5 2.5
17 IN2000 1303 16 IN1500 940 183 239 145 60 250.5 2.5
18 IN2400 1303 17 IN2000 1220 183 239 145 60 250.5 2.5
Dimensions in mm 18 IN2400 1220 183 239 145 60 250.5 2.5
Dimensions in mm

36 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 4
Pressure Drop Curves

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.
Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.

IN30 (Element length code 0) IN60 (Element length code 2)

Flow (US GPM) Flow (US GPM)

0 3 5 8 11 13 16 18 0 5 11 16 21 26 31 37
2.5 36.3 2.5 36.3

2 29 2 29
02Q 02Q

Δp (PSID)
Δp (PSID)

1.5 21.8 1.5 21.8

Δp (bar)
Δp (bar)

1 14.5 1 14.5
05Q 05Q
10Q 10Q
0.5 7.3 0.5 7.3
20Q 20Q
0 0 0 0
0 10 20 30 40 50 60 70 0 20 40 60 80 100 120 140
Flow (l/min) Flow (l/min)

IN90 (Element length code 3) IN120 (Element length code 4)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 0 13 26 39 53 66
2.5 36.3 2.5 36.3

2 29 2 29
02Q 02Q
Δp (PSID)

Δp (PSID)
1.5 21.8 1.5 21.8
Δp (bar)

Δp (bar)

1 14.5 1 14.5
05Q 10Q 05Q
0.5 7.3 0.5
10Q 7.3
20Q 20Q
0 0 0 0
0 50 100 150 200 0 50 100 150 200 250
Flow (l/min) Flow (l/min)

IN125 (Element length code 5) IN170 (Element length code 6)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 0 13 26 39 53 66 79 92
1.6 23.2 3 43.5
1.4 20.3 36.3
02Q 2.5
1.2 17.4
02Q 29
2
Δp (PSID)

14.5
Δp (PSID)

1
Δp (bar)

Δp (bar)

0.8 11.6 1.5 21.8

0.6 8.7 14.5

05Q 1
10Q 5.8 05Q
0.4
20Q 0.5
10Q 7.3
0.2 2.9
20Q
0 0 0 0
0 50 100 150 200 250 0 50 100 150 200 250 300 350
Flow (l/min) Flow (l/min)

IN230 (Element length code 7) IN300 (Element length code 8)

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 26 53 79 106 132 159

1.4 20.3 1.6 23.2

1.2 17.4 1.4 20.3

02Q
1.2 17.4
1 14.5
02Q
Δp (PSID)

14.5
Δp (PSID)

1
Δp (bar)
Δp (bar)

0.8 11.6
05Q 0.8 11.6
0.6 8.7 05Q
0.6 8.7
0.4 5.8 10Q
10Q 0.4 5.8
20Q
0.2 2.9 0.2 2.9
20Q
0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 600
Flow (l/min) Flow (l/min)

Low pressure filters

37
 In-Tank Mounted Return Line Filters

IN-AGB Series
Pressure Drop Curves (cont.)

IN400 (Element length code 9) IN500 (Element length code 10)

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 0 26 53 79 106 132 159

1.8 26.1 1.6 23.2
1.6 23.2 1.4 20.3
1.4 20.3 02Q
02Q 1.2 17.4
1.2 17.4

Δp (PSID)

Δp (PSID)
1 14.5
Δp (bar)

Δp (bar)
1 14.5
0.8 11.6
0.8 11.6
05Q
05Q 8.7 0.6 8.7
0.6 10Q
10Q 0.4 5.8
0.4 5.8
20Q 20Q
0.2 2.9 0.2 2.9
0 0 0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
Flow (l/min) Flow (l/min)

IN390 (3)(Element length code 11) IN500 (3) (Element length code 12)
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185

1.2 17.4 1.2 17.4
02Q
1 14.5 1 14.5
02Q
0.8 11.6 0.8 11.6
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.6 8.7 0.6 8.7

05Q 05Q
0.4 5.8 0.4 5.8
10Q 10Q
0.2 2.9 0.2 2.9
20Q
20Q
0 0 0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
Flow (l/min) Flow (l/min)

IN600 (Element length code 13) IN800 (Element length code 14)
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 0 53 106 159 211 264 317
1.2 17.4 1.2 17.4
02Q
1 14.5 1 14.5
02Q
0.8 11.6 0.8 11.6
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.6 05Q 8.7 8.7

0.6
05Q
0.4 10Q 5.8 0.4 5.8
10Q
0.2 2.9 0.2 2.9
20Q 20Q
0 0 0 0
0 100 200 300 400 500 600 700 800 900 0 200 400 600 800 1000 1200
Flow (l/min) Flow (l/min)

IN1000 (Element length code 15) IN1500 (Element length code 16)
Flow (US GPM) Flow (US GPM)

0 53 106 159 211 264 317 370 0 53 106 159 211 264 317 370 423
1.2 17.4 1.2 17.4
02Q 02Q
1 14.5 1 14.5

0.8 11.6 0.8 11.6

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.6 8.7 0.6 8.7

05Q 05Q
0.4 5.8 0.4 5.8
10Q
10Q 2.9 0.2 2.9
0.2
20Q 20Q
0 0 0 0
0 200 400 600 800 1000 1200 1400 0 200 400 600 800 1000 1200 1400 1600
Flow (l/min) Flow (l/min)

IN2000 (Element length code 17) IN1500 (Element length code 18)
Flow (US GPM) Flow (US GPM)

0 106 211 317 423 529 635 0 106 211 317 423 529 635
1.2 17.4 1.2 17.4
02Q
1 14.5 1 14.5
02Q
0.8 11.6 0.8 11.6
Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.6 8.7 0.6 8.7

05Q
05Q
0.4 5.8 0.4 5.8
10Q
10Q
0.2 2.9 0.2 2.9
20Q 20Q
0 0 0 0
0 400 800 1200 1600 2000 2400 0 400 800 1200 1600 2000 2400
Flow (l/min) Flow (l/min)

38 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 4
Pressure Drop Curves (cellulose and stainless steel media)

IN30 (Element length code 0) IN60 (Element length code 2)

Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 1.3 3 4.3 5 6.3 8 9.3 11 0 4.3 8 12.3 16 20.3 24

0.09 1.31 0.12 1.74
0.08 1.16
0.1 1.45
0.07 1.02
0.06 0.87 0.08 1.16

Δp (PSID)

Δp (PSID)
10C
Δp (bar)

Δp (bar)
0.05 0.73 10C
0.06 0.87
0.04 0.58
040W
0.03 0.44 0.04 0.58
040W
0.02 0.29
0.02 0.29
0.01 0.15
0 0 0 0
0 5 10 15 20 25 30 35 40 0 15 30 45 60 75 90
Flow (l/min) Flow (l/min)

IN90 (Element length code 3) IN120 (Element length code 4)

Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 8 16 24 31 0 8 16 24 31 39
0.12 1.74 0.14 2.03

0.1 1.45 0.12 1.74

0.1 1.45
0.08 1.16
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

10C 0.08 1.16

0.06 0.87 10C
0.06 0.87
0.04 0.58 040W
040W 0.04 0.58
0.02 0.29 0.29
0.02

0 0 0 0
0 30 60 90 120 0 30 60 90 120 150
Flow (l/min) Flow (l/min)

IN125 (Element length code 5) IN170 (Element length code 6)

Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 8 16 24 31 39 0 8 16 24 31 39 47 55
0.12 1.74 0.12 1.74

0.1 1.45 0.1 1.45

0.08 1.16 0.08 1.16

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

10C
0.06 0.87 0.06 0.87
10C
0.04 0.58 0.04 0.58
040W 040W
0.02 0.29 0.29
0.02

0 0 0 0
0 30 60 90 120 150 0 30 60 90 120 150 180 210
Flow (l/min) Flow (l/min)

IN230 (Element length code 7) IN300 (Element length code 8)

Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79 92 106
0.12 1.74 0.14 2.03

0.1 0.12 1.74

1.45
10C 0.1 1.45
0.08 1.16 10C
Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.08 1.16
0.06 0.87
0.06 0.87
0.04 0.58
040W 0.04 0.58
040W
0.02 0.29 0.02 0.29

0 0 0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300 350 400
Flow (l/min) Flow (l/min)

Cellulose and stainless steel media

Example: IN300 Filter Element Length 8 - Cellulose and stainless steel media
Low pressure filters
39
 In-Tank Mounted Return Line Filters

IN-AGB Series
Pressure Drop Curves (cellulose and stainless steel media)

IN390 (Element length code 11) IN500 (Element length code 12)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 0 26 53 79 106 132

0.07 1.02 0.05 0.73
0.06 0.87
0.04 0.58
0.05 0.73
10C 10C

Δp (PSID)

Δp (PSID)
Δp (bar)

0.03 0.44

Δp (bar)
0.04 0.58
040W 040W
0.03 0.44
0.02 0.29
0.02 0.29
0.01 0.15
0.01 0.15

0 0 0 0
0 100 200 300 400 500 0 100 200 300 400 500
Flow (l/min) Flow (l/min)

IN600 (Element length code 13) IN800 (Element length code 14)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185 211

0.07 1.02 0.06 0.87

0.06 0.87 0.05 0.73

10C
0.05 0.73 10C
0.04 0.58
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.04 0.58
040W 0.03 0.44
0.03 0.44 040W
0.02 0.29
0.02 0.29

0.01 0.15 0.01 0.15

0 0 0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700 800
Flow (l/min) Flow (l/min)

IN1000 (Element length code 15) IN1500 (Element length code 16)
Cellulose & Stainless steel media Cellulose & Stainless steel media
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 264 0 53 106 159 211 264 317 370 423
0.06 0.87 0.07 1.02
0.06 0.87
0.05 0.73
10C 10C
0.05 0.73
0.04 0.58
Δp (PSID)
Δp (PSID)

Δp (bar)

0.04
Δp (bar)

0.58
0.03 0.44 040W
040W 0.03 0.44
0.02 0.29 0.02 0.29

0.01 0.15 0.01 0.15

0 0 0 0
0 100 200 300 400 500 600 700 800 900 1000 0 200 400 600 800 1000 1200 1400 1600
Flow (l/min) Flow (l/min)

IN2000 (Element length code 17)

Cellulose & Stainless steel media
Flow (US GPM)

0 53 106 159 211 264 317 370 423 475 528 581
0.07 1.02

0.06 0.87

0.05 10C
0.73
Δp (PSID)
Δp (bar)

0.04 0.58
040W
0.03 0.44

0.02 0.29

0.01 0.15

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200
Flow (l/min)

Cellulose and stainless steel media

Example: IN300 Filter Element Length 8 - Cellulose and stainless steel media

40 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 4
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
IN310QLBNEXXX1 IN90-TXWL3-10B15 90 IN90 Length 3 10 Nitrile NA 1.5 Bar (22 Psi) NA None 937878Q TXWL3-10
IN320QLBNEXXX1 IN90-TXWL3-20 B15 90 IN90 Length 3 20 Nitrile NA 1.5 Bar (22 Psi) NA None 937877Q TXWL3-20
IN510QLBNEXXX1 IN125-TXWL3E-10 B15 125 IN125 Length 5 10 Nitrile NA 1.5 Bar (22 Psi) NA None 937852Q TXWL3E-10
IN520QLBNEXXX1 IN125-TXWL3E-20 B15 125 IN125 Length 5 20 Nitrile NA 1.5 Bar (22 Psi) NA None 937875Q TXWL3E-20
IN610QLBNEXXX1 IN170-TXWL4-10 B15 170 IN170 Length 6 10 Nitrile NA 1.5 Bar (22 Psi) NA None 937853Q TXWL4-10
IN620QLBNEXXX1 IN170-TXWL4-20 B15 170 IN170 Length 6 20 Nitrile NA 1.5 Bar (22 Psi) NA None 937874Q TXWL4-20
IN810QLBNEXXX3 IN300-TXWL5A-10 T B15 300 IN300 Length 8 10 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937855Q TXWL5A-10
IN820QLBNEXXX3 IN300-TXWL5A-20 T B15 300 IN300 Length 8 20 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937872Q TXWL5A-20
IN1210QLBNEXXX3 IN500-TXWL8C-10 T B15 500 IN500 Length 12 10 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937859Q TXWL8C-10
IN1220QLBNEXXX3 IN500-TXWL8C-20 T B15 500 IN500 Length 12 20 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937868Q TXWL8C-20
IN1510QLBNEXXX3 IN1000-TXWL12-10 T B15 1000 IN1000 Length 15 10 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937862Q TXWL12-10
IN1520QLBNEXXX3 IN1000-TXWL12-20 T B15 1000 IN1000 Length 15 20 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937865Q TXWL12-20
IN1710QBNEXXX3 IN2000-TXW14-10-B T B15 2000 IN2000 Length 17 10 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937772Q TXW14-10B
IN1720QBNEXXX3 IN2000-TXW14-20-B T B15 2000 IN2000 Length 17 20 Nitrile NA 1.5 Bar (22 Psi) NA Diffuser type T 937805Q TXW14-20B
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Configurator example filter including LEIF® element
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
IN 10 05QL V N H XXX 1

Configurator example filter including conventional element

Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
IN 18 20Q B N H XXX 3

Box 1 Box 2 Box 3

Code Filter Rating Degree of filtration
IN Insert IN-AGB Code Element media Glass fibre
IN30 0 Microglass III (for disposable elements)
IN60 2 Cellulose Ecoglass III (for Leif® elements) Wire mesh
IN90 3 Nom. rating Abs. rating
IN120 4 Disposable element 10C 02Q 05Q 10Q 20Q 040W
IN125 5 LEIF® element 02QL 05QL 10QL 20QL
IN170 6
IN230 7
IN300 8
IN400 9
IN500 10
IN390(3) 11
IN500(3) 12
Box 4 Box 5
IN600 13
IN800 14 Seal type Indicator
IN1000 15 Seal material Code Code
IN1500 16 Nitrile B No indicator N
IN2000 17 Fluoroelastomer V
IN2400 18 Neoprene N

Box 6 Box 7 Box 8

Bypass valve Filter connection Options
Bypass valve Code Ports Code Options Code
0.8 bar B No ports applicable XXX No diffuser required 1
1.5 bar E Diffuser type T with perforated plate area 3
2.0 bar for IN-AGB (up to length 12) H Diffuser type P without perforated plate area 4
Blocked bypass X No magnets 5
Other bypass settings on request Diffuser type T and no magnets A
Diffuser type P and no magnets B
Note: IN-AGB size 2-400 and 2-500 are standard supplied
Highlights Key (Denotes part number availability) without magnets
123 Item is standard
123 Item is standard green option
123 Item is semi standard
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Low pressure filters
41
 In-Tank Mounted Return Line Filters

IN-AGB Series
Ordering Information (cont.)

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
code
% efficiency, based on the above beta ratio (ßx)
50.0% 90.0% 98.7% 99.0% 99.5% 99.9%
N/A N/A N/A N/A N/A 4.5 02Q/02QL
N/A N/A 4.5 5 6 7 05Q/05QL
N/A 6 8.5 9 10 12 10Q/10QL
6 11 17 18 20 22 20Q/20QL

Supersedes spare element table

IN30 TXWL-2 TXWL-5 TXWL-10 TXWL-20
Part number spare element 937822Q 937885Q 937884Q 937883Q
IN60 TXWL2-2 TXWL2-5 TXWL2-10 TXWL2-20
Part number spare element 937823Q 937880Q 937881Q 937882Q
IN90 TXWL3-2 TXWL3-5 TXWL3-10 TXWL3-20
Part number spare element 937824Q 937879Q 937878Q 937877Q
IN120 TXWL3D-2 TXWL3D-5 TXWL3D-10 TXWL3D-20
Part number spare element 937825Q 937850Q 937851Q 937876Q
IN125 TXWL3E-2 TXWL3E-5 TXWL3E-10 TXWL3E-20
Part number spare element 937826Q 937849Q 937852Q 937875Q
IN170 TXWL4-2 TXWL4-5 TXWL4-10 TXWL4-20
Part number spare element 937827Q 937848Q 937853Q 937874Q
IN230 TXWL5-2 TXWL5-5 TXWL5-10 TXWL5-20
Part number spare element 937828Q 937847Q 937854Q 937873Q
IN300 TXWL5A-2 TXWL5A-5 TXWL5A-10 TXWL5A-20
Part number spare element 937829Q 937846Q 937855Q 937872Q
IN400 TXWL5B-2 TXWL5B-5 TXWL5B-10 TXWL5B-20
Part number spare element 937830Q 937845Q 937856Q 937871Q
IN500 TXWL5C-2 TXWL5C-5 TWXL5C-10 TWXL5C-20
Part number spare element 937831Q 937844Q 937857Q 937870Q
IN390 TXWL8A-2 TXWL8A-5 TXWL8A-10 TXWL8A-20
Part number spare element 937832Q 937843Q 937858Q 937869Q
IN500 TXWL8C-2 TXWL8C-5 TXWL8C-10 TXWL8C-20
Part number spare element 937833Q 937842Q 937859Q 937868Q
IN600 TXWL10-2 TXWL10-5 TXWL10-10 TXWL10-20
Part number spare element 937834Q 937841Q 937860Q 937867Q
IN800 TXWL11-2 TXWL11-5 TXWL11-10 TXWL11-20
Part number spare element 937835Q 937840Q 937861Q 937866Q
IN1000 TXWL12-2 TXWL12-5 TXWL12-10 TXWL12-20
Part number spare element 937836Q 937839Q 937862Q 937865Q
IN1500 TXWL13-2 TXWL13-5 TXWL13-10 TXWL13-20
Part number spare element 937837Q 937838Q 937863Q 937864Q

42 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 4
Ordering Information (cont.)

Supersedes spare element table

IN30 TXX-10-B TXW-2-B TXW-5-B TXW-10-B TXW-20-B ST-40-B
Part number spare element 937720 937752Q 937753Q 937788Q 937789Q 937821
IN60 TXX2-10-B TXW2-2-B TXW2-5-B TXW2-10-B TXW2-20-B ST2-40-B
Part number spare element 937721 937751Q 937754Q 937787Q 937790Q 937820
IN90 TXX3-10-B TXW3-2-B TXW3-5-B TXW3-10-B TXW3-20-B ST3-40-B
Part number spare element 937722 937750Q 937755Q 937786Q 937791Q 937819
IN120 TXX3D-10-B TXW3D-2-B TXW3D-5-B TXW3D-10-B TXW3D-20-B ST3D-40-B
Part number spare element 937723 937749Q 937756Q 937785Q 937792Q 937818
IN125 TXX3E-10-B TXW3E-2-B TXW3E-5-B TXW3E-10-B TXW3E-20-B ST3E-40-B
Part number spare element 937724 937748Q 937757Q 937784Q 937793Q 937817
IN170 TXX4-10-B TXW4-2-B TXW4-5-B TXW4-10-B TXW4-20-B ST4-40-B
Part number spare element 937725 937747Q 937758Q 937783Q 937794Q 937816
IN230 TXX5-10-B TXW5-2-B TXW5-5-B TXW5-10-B TXW5-20-B ST5-40-B
Part number spare element 937726 937746Q 937759Q 937782Q 937795Q 937815
IN300 TXX5A-10-B TXW5A-2-B TXW5A-5-B TXW5A-10-B TXW5A-20-B ST5A-40-B
Part number spare element 937727 937745Q 937760Q 937781Q 937796Q 937814
IN390 TXX8A-10-B TXW8A-2-B TXW8A-5-B TXW8A-10-B TXW8A-20-B ST8A-40-B
Part number spare element 937728 937742Q 937763Q 937778Q 937799Q 937813
IN500 (3 series) TXX8C-10-B TXW8C-2-B TXW8C-5-B TXW8C-10-B TXW8C-20-B ST8C-40-B
Part number spare element 937729 937741Q 937764Q 937777Q 937800Q 937812
IN600 TXX10-10-B TXW10-2-B TXW10-5-B TXW10-10-B TXW10-20-B ST10-40-B
Part number spare element 937730 937740Q 937765Q 937776Q 937801Q 937811
IN800 TXX11-10-B TXW11-2-B TXW11-5-B TXW11-10-B TXW11-20-B ST11-40-B
Part number spare element 937731 937739Q 937766Q 937775Q 937802Q 937810
IN1000 TXX12-10-B TXW12-2-B TXW12-5-B TXW12-10-B TXW12-20-B ST12-40-B
Part number spare element 937732 937738Q 937767Q 937774Q 937803Q 937809
IN1500 TXX13-10-B TXW13-2-B TXW13-5-B TXW13-10-B TXW13-20-B ST13-40-B
Part number spare element 937733 937737Q 937768Q 937773Q 937804Q 937808
IN2000 TXX14-10-B TXW14-2-B TXW14-5-B TXW14-10-B TXW14-20-B ST14-20
Part number spare element 937734 937736Q 937769Q 937772Q 937805Q 937807
IN2400 - TXWH14-2-B TXWH14-5-B TXWH14-10-B TXWH14-20-B -
Part number spare element 937735Q 937770Q 937771Q 937806Q

Low Pressure Filters

43
 Tanktop Mounted Return Line Filters with Integrated Air Breather

Tanktopper Series I,II & III

MAX 650 I/min - 10 bar

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Low Pressure Filters

45
 Tanktop Mounted Return Line Filters

Tanktopper Series I,II & III

Features & Benefits

Features Advantages Benefits

Return line filter with Integrated All in one filter More compact design, cost reduction
airbreather due to elimination of loose airbreather
Airbreather equipped with high No oil leakage through the airbreather Improved efficiency of airbreather
quality labyrinth No oil leakage on the tank / in the
environment
Second port and dipstick available Filler port and level glass function can be Significant reduction of reservoir
integrated in filter accessories
Airbreather element always supplied Both filter elements can be replaced during the Improved protection of system due to
with spare return line filter elements service event change of airbreather element
LEIF® elements Patented element safeguards the use of genuine Guaranteed quality of filtration
parts Contributes to ISO 14001 certification
Magnetic pre-filtration Removes ferrous particles, even during bypass Improved fluid cleanliness levels
conditions Extended element life time
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
Full flow bypass with low hysteresis Reduction of bypass period due to low hysteresis Improved protection of system
Only a small part of the total flow is bypassing
the element
Standard or customised funnel Ensures that oil enters the tank under the oil level Significant reduction of oil foaming

Typical Applications

TPR I TPR II TPR III

Fork lift trucks Gully-sucker Mobile cranes
Power packs Power packs Refuse vehicles
Mini excavator Dredging ships

The Parker Filtration Tanktopper Series I, II & III

Tanktop Mounted Return Line Filters.
The TPR Series I, II & III offer a total filtration solution.
A 10-micron Abs. air breather that is integrated into the
filter housing, a magnet column for pre-filtration, ‘In-to-Out’
filtration, a full-flow bypass with low hysteresis, and the
high performance Q3 filter element materials are all proven
success factors in efficient return-line filtration for flow rates
up to 650 l/min. Several pressure gauges and switches can
be applied, combined or not with a dipstick. The all-in-one,
easy-to-mount cost-saving TPR solution allows for a more
compact tank design.

46 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 5
 Specification

Operation pressure: Filtration media:

Max. 10 bar. Microglass III, Ecoglass III for LEIF® element. Air breather 10 micron Abs.
Assembly: Also available 10µm Cellulose and 40µm stainless steel mesh. (TPR1)
Tank top mounted. Element collapse rating:
Connections: 10 bar (ISO 2941).
Threaded BSP or SAE ports. Pressure indicator options:
Second return port available for Tanktopper II and Tanktopper III. Setting 0.7 or 1.2 bar.
Filter housing: Other settings on request.
Aluminium head and co-polymer cover. Visual pressure gauge.
Electrical pressure switch.
Seal material:
Nitrile, Fluoroelastomer. Options:
Dipstick
Operation temperature range: Second port (only for TPR II and III)
-40 to +80°C.
Magnetic pack:
Bypass setting: Optional for Tanktopper I.
Opening pressure 0.8, 1.5 or 2.5 bar for Tanktopper I. Standard for Tanktopper II and III.
Opening pressure 1.5 bar for Tanktopper II and III.
Filter element:
Degree of filtration: LEIF® element with reusable metal element sleeve.
Determined by multipass test according to ISO 16889. Conventional style element with steel end caps only optional for
Flow fatigue characteristics: Tanktopper I. The LEIF® element is patented and safeguards the
Filter media is supported so that the optimum fatigue life is achieved. use of genuine parts.
Note: LEIF® element can be used with mineral and HEES type
oils. For other fluids consult Parker Filtration.
LEIF® contributes to ISO 14001 quality standards

Tanktopper I (length 1 and 2)

Free element clearance

1
27
F

2
(1.06)
3
77 (3.03)

4
(0.59) D
33 (1.3)

0.2
3.2
15

11
Min 3.15)

M8
(0.59)

5
.80
15

R61
74±0.5 (2.91±0.02)
mm
Min.80mm
(3.15)

6
Mounting hole 13
12
Ø72.9
Max oil-level 0°-max.45°
7
(2.87)
Ø61
(2.40)
H

* For filter with air breather:

In order to keep the minimum required
distance under all circumstances, it is
NOM.Ø25 recommended to position the filter in the
(0.98) middle of the reservoir 9 Tanktopper I
R11

55 (2.16) 61 (2.40) Ref. No. Description

) 1 1 Cover
G / 8(BSP
1 8
2 1 Magnet-set
O 22 10
54° IS 3 1 Cover-seal
4 1 Bridge (blue)
5 1 LEIF® Element
Pitch 90

6 1 Sleeve
7 1 Funnel-assembly
74 (2.91)

8 1 Filter-housing
54° Length H F D 9 1 Housing-seal
ISO G 1/ 10 1 Airguide
228 8 169 160 G3/4
Indicator (BS 1 TPR1-40 (6.65) (6.30) (BSP) 11 1 Cover airbreather
P ) Ø9 (0.35)
61 (2.40) Max. torque-load 269 260 12 1 Breather-element
filter-tank 8 Nm 2 TPR1-80 (10.60) (10.23) SAE 12 13 1 Dipstick assembly
Dimensions in mm
Low pressure filters
47
 Tanktop Mounted Return Line Filters

Tanktopper Series I,II & III

Specification (cont.)

Tanktopper II (length 5, 6 and 7) 1

2
3
F Free element clearance
4
5

100 Second port optional 6

(3.94) (D)
17
40 3.2 0.3 (0.67) (Port) D 7
(1.59)
G11/4 (BSP) 8
4xM8 111+0.5
0
Mounting hole G11/2 (BSP)
(Min. 100mm) SAE 20 9
(3.94) 14
Max oil level (H) SAE 24

Length H F
181 170
5 TPR2-120 (7.12) (6.70) 10
267 255
6 TPR2-200 (10.51) (10.03)
4x9 on pitch circle Ø145 400 380
Torque-load max. 8 Nm (5.70) 7 TPR 2-250 (15.75) (14.96)
ISO 228 G1/8 (BSP) Dimensions in mm 11
12
82 (Min. 100mm)
(3.23) (3.94)

Max oil level (0°-max.30°)

105
(4.13) * For filter with
air breather:
In order to keep the
13
Tanktopper II & III
minimum required Ref. No. Description
Ø40
(1.57) Top view
distance under all 1 1 Hexagon socket bolt M8
circumstances, it is
recommended to
2 1 Air breather cap
171 (6.73) 3 1 Air breather filter medium
position the filter in
the middle of the 4 1 Cover (assembly)
Tanktopper III (length 10 and 11) reservoir 5 1 Cover seal
6 1 Bridge
7 1 Magnet set
Free element clearance 8 1 Element
1 9 1 Sleeve
10 1 Filter house
2
(5.31)

11 1 Airguide
135

3 12 1 Tank gasket
(D) Second port optional 13 1 Funnel
(1.73)

4 14 1 Dipstick assembly
44

3.2

*
0.3
22

For filter with air breather: 5

In order to keep the minimum required
distance under all circumstances, it is
7
+1
4xM10 Mounting hole Ø140 0 recommended to position the filter in the 6
(5.51) middle of the reservoir
Oil level
Length D H F
14
-G11/2 415 345
(H) 10 TPR3-450 (BSP) (16.34) (13.58) 8
-G11/2 600 530
11 TPR3-650 (BSP) (23.62) (20.87) 9
Dimensions in mm
10

4x11 on pitch circle 185

ISO 228-G1/8 (BSP) Torque-load max. 15 Nm
110 (4.33) 110 (4.33) 11

12
105 (Min. 100mm)
(4.13) (3.94) 13
0°-max.40°
Oil level

130
(5.12)

Ø40 (1.57) Top view

48 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 5
 Tanktop Mounted Return Line Filters

Tanktopper Series I & II

Pressure Drop Curves - Tanktopper I

Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.

TPR40 Empty Housing (Length code 1) TPR80 Empty Housing (Length code 2)
Flow (US GPM) Flow (US GPM)

0 1 3 4 5 6 8 9 11 12 13 0 3 5 8 11 13 16 18 21 24
0.2 2.9 0.2 2.9

0.15 0.15

Δp (PSID)

Δp (PSID)
Δp (bar)
Δp (bar)

0.1 1.5 0.1 1.5

0.05 0.05

0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 0 10 20 30 40 50 60 70 80 90
Flow (l/min) Flow (l/min)

TPR40 (Element length code 1) TPR80 (Element length code 2)

Flow (US GPM) Flow (US GPM)

0 1 3 4 5 6 8 9 11 12 13 0 3 5 8 11 13 16 18 21 24
1.4 20.3 1.4 20.3

1.2 17.5 1.2 17.5

02Q 02Q
1 14.5 1 14.5

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

05Q 05Q
0.6 8.7 0.6 8.7
10Q 10Q
0.4 5.8 0.4 5.8

0.2 20Q 2.9 0.2

20Q 2.9

0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 0 10 20 30 40 50 60 70 80 90
Flow (l/min) Flow (l/min)

TPR40 (Element length code 1) TPR80 (Element length code 2)

(cellulose and stainless steel) (cellulose and stainless steel)
Flow (US GPM) Flow (US GPM)

0 1 3 4 5 6 8 9 11 12 13 0 3 5 8 11 13 16 18 21 24
0.1 1.5 0.1 1.5

0.08 1.16 0.08 1.16

Δp (PSID)
Δp (PSID)

0.06 0.87 0.06 0.87

Δp (bar)
Δp (bar)

10C 10C
0.04 0.58 0.04 0.58
040W 040W
0.02 0.29 0.02 0.29

0 0 0 0
0 5 10 15 20 25 30 35 40 45 50 0 10 20 30 40 50 60 70 80 90
Flow (l/min) Flow (l/min)

Pressure Drop Curves - Tanktopper II

Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.
TPR II Empty Housing with G11/4” ports TPR II Empty Housing with G11/2” ports
(Length code 5, 6 and 7) (Length code 5, 6 and 7)
Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 37 42 0 5 11 16 21 26 31 37 42 47 53 58 64 69
0.2 2.9 0.2 2.9

0.15 0.15
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

0.1 1.5 0.1 1.5

0.05 0.05

0 0 0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 220 240 260
Flow (l/min) Flow (l/min)

Low pressure filters

49
 Tanktop Mounted Return Line Filters

Tanktopper Series II & III

Pressure Drop Curves - Tanktopper II (cont.)

Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.

TPR120 (Element length code 5) TPR200 (Element length code 6)

Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 37 0 13 26 39 53 66 79
0.8 11.6 0.9 13.1
0.7 10.2 0.8 11.6
02Q
02Q 0.7 10.2
0.6 8.7
05Q 0.6 8.7

Δp (PSID)
Δp (PSID)
0.5 7.3 05Q

Δp (bar)
Δp (bar)

0.5 7.3
0.4 5.8
0.4 5.8
10Q 4.4 10Q
0.3
0.3 4.4
0.2 2.9 0.2 2.9
20Q
0.1 1.5 20Q 1.5
0.1
0 0 0 0
0 20 40 60 80 100 120 140 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

TPR250 (Element length code 7)

Flow (US GPM)

0 13 26 39 53 66 79
0.8 11.6
0.7 10.2
0.6 8.7

Δp (PSID)
0.5 7.3
Δp (bar)

0.4 5.8
0.3 4.4
02Q 05Q
0.2 2.9
10Q
0.1 1.5
20Q
0 0
0 50 100 150 200 250 300
Flow (l/min)

Pressure Drop Curves - Tanktopper III

Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.
TPR III Empty Housing with G11/2” ports
(Length code 10 and 11)
Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 145 159 172 185 198 211 225
1 14.5
0.9
0.8 11.6
0.7
Δp (PSID)

0.6 8.7
Δp (bar)

0.5
0.4 5.8
0.3
0.2 2.9
0.1
0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850
Flow (l/min)

TPR450 (Element length code 10) TPR650 (Element length code 11)
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185 211 238
1.2 17.4 1.2 17.4
02Q
1
02Q
14.5 1 14.5

0.8 11.6 0.8 11.6

Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

05Q 05Q
0.6 8.7 0.6 8.7
10Q 10Q
0.4 5.8 0.4 5.8
20Q
20Q
0.2 2.9 0.2 2.9

0 0 0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700 800 900
Flow (l/min) Flow (l/min)

50 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 5
 Tanktop Mounted Return Line Filters

Tanktopper Series I,II & III

Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
TPR110QLBP2EG12E TPR40-G3/4 PXWL1-10 B15 MM MA 40 TPR40 Length 1 10 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 Magnets 937902Q PXWL1-10
TPR120QLBP2EG12E TPR40-G3/4 PXWL1-20 B15 MM MA 40 TPR40 Length 1 20 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 Magnets 937904Q PXWL1-20
TPR210QLBP2EG12L TPR80-G3/4 PXWL2-10 AB15 MM MA 80 TPR80 Length 2 10 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 Aluminium funnel, magnets 937903Q PXWL2-10
TPR220QLBP2EG12L TPR80-G3/4 PXWL2-20 AB15 MM MA 80 TPR80 Length 2 20 Nitrile Plugged 1.5 Bar (22 Psi) G3/4 Aluminium funnel, magnets 937905Q PXWL2-20
TPR510QLBP2E2G201 TPR120-2G11/4 PXWL3-10 B15 MM 120 TPR120 Length 5 10 Nitrile Plugged 1.5 Bar (22 Psi) 2xG11/4 None 937892Q PXWL3-10
TPR520QLBP2E2G201 TPR120-2G11/4 PXWL3-20 B15 MM 120 TPR120 Length 5 20 Nitrile Plugged 1.5 Bar (22 Psi) 2xG11/4 None 937895Q PXWL3-20
TPR710QLBP2E2G241 TPR250-2G11/2 PXWL4A-10 B15 MM 250 TPR250 Length 7 10 Nitrile Plugged 1.5 Bar (22 Psi) 2xG1 /2
1
None 937894Q PXWL4A-10
TPR720QLBP2E2G241 TPR250-2G11/2 PXWL4A-20 B15 MM 250 TPR250 Length 7 20 Nitrile Plugged 1.5 Bar (22 Psi) 2xG1 /2
1
None 937897Q PXWL4A-20
TPR1110QLBP2E2G241 TPR650-2G11/2 PXWL8-10 B15 MM 650 TPR650 Length 11 10 Nitrile Plugged 1.5 Bar (22 Psi) 2xG11/2 None 937914Q PXWL8-10
TPR1120QLBP2E2G241 TPR650-2G11/2 PXWL8-20 B15 MM 650 TPR650 Length 11 20 Nitrile Plugged 1.5 Bar (22 Psi) 2xG11/2 None 937917Q PXWL8-20
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Visual indicator Specifications Normally open contacts

Thread connection G1/8 Elec.rating 42V / 2A
Code FMUG2EBPG02L Thread connection G1/8
Elec.connection AMP terminal 6.3x0.8
Protection IP65 (terminal IP00)
Switch type NO or NC Normally closed contacts
Code FMUS2EBMG02L (NO switch)
FMUS3EBMG02L (NC switch)

Product configurator
Configurator example TPR filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
TPR 2 05QL B S2 I G12 L

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
TPR Housing Code Element media Glass fibre
TPR 1-40 1 Microglass III (for disposable elements)
TPR 1-80 2 Cellulose Ecoglass III (for Leif® elements) Wire mesh
TPR 2-120 5 Nom. rating Abs. rating
TPR 2-200 6 Disposable element (TPR I only) 10C 02Q 05Q 10Q 20Q 040W
TPR 2-250 7 LEIF® element (for all TPR Filters) 02QL 05QL 10QL 20QL
TPR 3-450 10
TPR 3-650 11

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 1.2 bar, G1/8 G2 0.8 bar B
Fluoroelastomer on request Pressure switch 42V, 1.2 bar setting, NO with G1/8 S2 1.5 bar E
Pressure switch 42V, 1.2 bar setting, NC with G1/8 S3 2.5 bar (TPR 1 Series only) I
Pressure switch 250V, NO/NC with G1/8 S4 Blocked bypass on request
No indicator, indicator ports not machined on request Other bypass settings on request
No indicator, indicator port R plugged on request
Note 1: Part numbers featured with bold
No indicator, indicator ports L + R plugged P2 highlighted codes will ensure a ‘standard’
Other settings for indicators / gauges on request on request product selection.
Note 2: Alternate displayed part number
selection will require you to contact Parker
Filtration for availability.
Box 7 Box 8
Filter connection Options
Ports Code Options Code
G3/4 (BSP) (TPR 1 Series) G12 Standard 1
SAE12 (TPR 1 Series) S12 Dipstick 6
G11/4 (BSP) (TPR 2 Series) G20 Aluminium funnel for TPR 1-80 J Highlights Key (Denotes part
2 x ISO 228-G11/4 (BSP) (TPR 2 Series) 2G20 Magnets for TPR 1 Series E number availability)
SAE 20 (TPR 2 Series) S20 Magnets + Dipstick for TPR 1 Series K 123 Item is standard
2 x SAE 20 (TPR 2 Series) 2S20 Magnets + Aluminium Diffuser for TPR 1 Series L 123 Item is standard green option
SAE 24 (TPR 2 Series) S24 Magnets + Aluminium Diffuser + Dipstick for TPR 1 Series M 123 Item is semi standard
2 x SAE 24 (TPR 2 Series) 2S24 Other combinations on request 123 Item is non standard
G11/2 (BSP) (TPR 2 and 3 Series) G24 Note: Tanktopper I Series are standard supplied with POM type diffuser. Note: Standard items are in stock, semi standard items
G11/2 (BSP) (TPR 2 and 3 Series) 2G24 Aluminium funnel is recommended for heavy duty applications, sensitivity for are available within four weeks
electrostatically charging or high fluid temperatures.
Tanktopper II and III Series are always supplied with metal diffuser.

Low pressure filters

51
 Tanktop Mounted Return Line Filters

Tanktopper Series I,II & III

Ordering Information (cont.)

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
code
% efficiency, based on the above beta ratio (ßx)
50.0% 90.0% 98.7% 99.0% 99.5% 99.9%
N/A N/A N/A N/A N/A 4.5 02Q/02QL
N/A N/A 4.5 5 6 7 05Q/05QL
N/A 6 8.5 9 10 12 10Q/10QL
6 11 17 18 20 22 20Q/20QL

Supersedes spare element table

TPR 1-40 PXWL1-2 PXWL1-5 PXWL1-10 PXWL1-20
Part number spare element 937898Q 937900Q 937902Q 937904Q
TPR 1-80 PXWL2-2 PXWL2-5 PXWL2-10 PXWL2-20
Part number spare element 937899Q 937901Q 937903Q 937905Q
TPR 2-120 PXWL3-2 PXWL3-5 PXWL3-10 PXWL3-20
Part number spare element 937886Q 937889Q 937892Q 937895Q
TPR 2-200 PXWL4-2 PXWL4-5 PXWL4-10 PXWL4-20
Part number spare element 937887Q 937890Q 937893Q 937896Q
TPR 2-250 PXWL4A-2 PXWL4A-5 PXWL4A-10 PXWL4A-20
Part number spare element 937888Q 937891Q 937894Q 937897Q
TPR 3-250 PXWL6-2 PXWL6-5 PXWL6-10 PXWL6-20
Part number spare element 937906Q 937909Q 937912Q 937915Q
TPR 3-450 PXWL7-2 PXWL7-5 PXWL7-10 PXWL7-20
Part number spare element 937907Q 937910Q 937913Q 937916Q
TPR 3-650 PXWL8-2 PXWL8-5 PXWL8-10 PXWL8-20
Part number spare element 937908Q 937911Q 937914Q 937917Q

Supersedes spare element table

TPR 1-40 PXX1A-10 PXW1A-2 PXW1A-5 PXW1A-10 PXW1A-20 PS1A-40
Part number spare element 937918 937920Q 937925Q 937930Q 937935Q 937940
TPR 1-80 PXX2A-10 PXW2A-2 PXW2A-5 PXW2A-10 PXW2A-20 PS2A-40
Part number spare element 937919 937921Q 937926Q 937931Q 937936Q 937941
TPR 3-160 PXW5-2 PXW5-5 PXW5-10 PXW5-20
Part number spare element 937922Q 937927Q 937932Q 937937Q
TPR 3-250 PXW6-2 PXW6-5 PXW6-10 PXW6-20
Part number spare element 937923Q 937928Q 937933Q 937938Q
TPR 3-450 PXW7-2 PXW7-5 PXW7-10 PXW7-20
Part number spare element 937924Q 937929Q 937934Q 937939Q

52 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 5
 Tanktop Mounted Suction & Return Line Filters - Types SR1 & SR2

Suction Return Series

MAX 250 I/min - 10 bar

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Low pressure filters

53
 Tanktop Mounted Suction & Return Line Filters - Types SR1 & SR2

Suction Return Series

Features & Benefits

Features Advantages Benefits

Compact design Less space required to apply SR Series Improved flexibility during system design
Bypass valve mounted in series with Pressurisation of filtered oil for hydrostatic drive Lower risk of pump cavition
back-pressure valve ensured during bypass No direct bypass in the tank reducing
the additional risk of oil foaming
LEIF® elements Patented element safeguards the use of genuine Guaranteed quality of filtration
parts Contributes to ISO 14001 certification
Strainer located in filter head Strainer filters all bypass fluid by using a system- Improved protection of system
matched degree of filtration Strainer can be inspected and cleaned
during service events
High level of customisation Dedicated system-matched solutions can be Improved integration of filter in system
easily made available combined with lower initial system costs
Full flow bypass with low hysteresis Reduction of bypass period due to low hysteresis Improved protection of system
Only a small part of the total flow is bypassing
the element
Standard or customised funnel Ensures that oil enters the tank under the oil level Significant reduction of oil foaming
Multiple ports availability Flexibility related to suction- and return line More compact solutions can be realised
hose(s) arrangement The use of manifold blocks can be
avoided
Easy to integrate with cooler circuit

Typical Applications

Mobile equipment with both open and closed

hydraulic circuits. For example: Optional
Filtered oil supply to
strainer
Road sweepers charge pump

Road rollers
Fork lift trucks Separator plate
with 1.7 bar
Loading shovels bypass
Return oil

Telescopic handlers
Dump trucks
Skid steers
Agricultural harvesting machines
Filtered oil at 0.5
Mini excavators bar pressure

The Parker Filtration Tank Top Green LEIF® filter element,

flow direction out to in
Mounted Suction & Return Line Filters.
A tank top mounted return filter capable of
feeding filtered oil under positive pressure to the
suction side of the boost pump, thereby filtering
Filtered oil return
both open and closed loop oil systems through to tank
one filter. The Parker SR filters use the patented
LEIF® element for environmental-friendly filtration Valve assembly
0.5 bar back pressure
and offers protection against the use of pirate valve with integrated
elements. Several options including integrated anti cavitation valve
suction strainer and dipstick are available.

54 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 6
Specification

Pressure ratings: Filtration media:

Max. 10 bar. Type SR1 and SR2 –
Assembly: Ecoglass III for LEIF® elements. See table 1 and 2 on the following page.
Tank top mounted filters. - High dirt holding capacity.
- Low pressure drop.
Connections: - Extended service life.
Return port G1 (to BS 2779).
Suction port G3/4 (to BS 2779). } SR1 Element collapse rating:
Type SR1 – 10 bar (ISO2941).
Return port G11/4 (ISO 228) or SAE20: Type SR2 – 10 bar (ISO2941).
Optional second return port type SR2.
Suction port G1 (ISO 228) or SAE16:
}SR2
Suction line:
Back-pressure valve setting 0.5 bar (nominal).
Standard two suction ports.
Anti-cavitation:
Seal material:
Emergency suction valve fitted as standard.
Type SR1 – Nitrile.
Type SR2 – Nitrile, Fluoroelastomer. Construction:
Other seal material on request. Type SR1 and Type SR2
Operating temperature range: Filter Precision pressure die casting
-30° to +110°C. Housing:
Cover: Glass reinforced nylon (high impact and
Bypass valve system:
temperature resistant)
Main system bypass valve.
Weight: 1.4Kg 3.3Kg
Type SR1 – 1.7 bar (2.5 bar optional).
Filter LEIF® element with reusable metal element sleeve.
Type SR2 – 1.7 bar (2.5 bar optional).
element: The patented LEIF® concept contributes to ISO14001

}
Degree of filtration: and can be applied with mineral and HEES type fluids. SR1
Determined by multipass test according to ISO 16889. For other fluid types consult Parker Filtration. & SR2
Flow fatigue characteristics:
Filter media designed to optimise fatigue life.

Circuit Application Example Suction Return Filter: Hydraulic Circuit

Open circuit
operating
hydraulics
1.7 bar
Bypass valve Filter element

Suction Optional strainer

return filter
Power take
assembly
off
Anti
cavitation S
Closed loop valve
circuit example
0.5 bar (Nominal)
Back pressure valve

Tank

Note: Suction return filter without optional strainer. Note: Suction return filter with optional strainer.

Low pressure filters

55
 Tanktop Mounted Suction & Return Line Filters - Types SR1 & SR2

Suction Return Series

SR1
A
Element removal
B
distance – C
D
H max

E
0.2
3.2 F

ØG

Optional
Tank hole out-out ØJ dipstick 2 holes Ø7.0
re on a 115 PCD
a
I max

squ
Alternative position K Optional
max.220

for indicators indicator

2 holes Ø11.0
on a 115 PCD

L
Minimum oil level

4.25°

SR2 A
B
C

Optional second
return port
H max

3.2
F

ØG Alternative position for

indicators
I max

4 holes Ø11.0
D on a 165 PCD
max. 250

Tank hole cutout ØJ

K square

L
Minimum oil level

Optional pressure switch

127

Dimensions
mm A B C D E F G H I J K L
(inches)
Type SRL1 106 55 280 29.75 26 28 70 96 361 71 to 73 105 72
(4.17) (2.17) (11.0) (1.17) (1.02) (1.10) (2.76) (3.78) (14.21) (2.8 to 2.87) (4.13) (2.83)
142 64 380 81 45 36 100 137 440 101 to 103 145 81
Type SRL2 (5.59) (2.52) (14.96) (3.19) (1.77) (1.42) (3.94) (5.39) (17.32) (3.98 to 4.06) (5.71) (3.19)
Element removal distance for dimension C.

56 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 6
Indicator Details
Protective cover

Visual indicator 2 bar

Thread connection G1/8
Normally open contacts Code FMUG5HBMG02L

Pressure switch
Elec.rating 42V / 2A
Thread connection G1/8
74

Normally closed contacts

Elec.connection AMP terminal 6.3 x 0.8
55

24 A/F Protection IP65 (terminal IP00)

Setting 2 bar
Switch type NO or NC
9

Code FMUS6HBMG02L (NO switch)

G1/8 (BSP) FMUS7HBMG02L (NC switch)

Ø28 Note: Vacuum indicators visual or electrical are available on

request for filter type SR2 only.

Principles of Operation

Suction Return Series filter Benefits

This one filter assembly is designed to carry out two specific functions: (1) Only one filter is required to supply filtered oil to both open and
(1) Filter system return line oil. closed loop circuits.
(2) Supply filtered oil under positive pressure to the closed loop (2) Feeding the closed loop circuit with filtered oil at a nominal
hydrostatic circuits. pressure of 0.5 bar ensures excellent cold start characteristics,
thus reducing the risk of cavitation.
Principles of operation (3) Four hole mounting with gasket seal.
(1) Return oil from both the open and closed circuits* is fed into the (4) Microglass III filter element materials ensure; low pressure drop,
Suction Return Series Filter at port ‘R’. high dirt holding capacity and extended service life.
(2) The filtered oil is maintained at a nominal 0.5 bar by the unique (5) Type Parker SR filters with patented LEIF® element, unique drain
back pressure valve assembly and fed into the closed loop construction, quick element replacement concept.
hydrostatic circuit via port ‘S’.
(3) Surplus filtered oil is fed back to the tank via the back pressure *CAUTION:
valve assembly. Back pressure in pump and motor drain lines should always be kept
(4) Emergency suction (anti-cavitation) valve: This valve is fitted as at a minimum thus protecting shaft seals etc.
standard to ensure oil is always available to the closed loop system, If case drain oils are to be fed through the return line filter please
even on emergency occasions when the return flows do not meet consult the pump/motor manufactures for details on maximum
the flow demands of the closed loop circuit. allowable back pressure.
Ensure filter elements are replaced when element condition indicators
Additional installation guidance notes show that the bypass setting has been reached.
(1) Return oil flow should always be greater than the oil flow rate Failure to observe the above operation and guidance notes, or use of
demanded by the closed loop charge pump. non genuine Parker specified filter elements could cause damage to
(2) Oil level at all times should not fall below valve assembly at the the system. System designers should always ensure that adequate
base of the filter bowl. cooling capacity is available.

Low pressure filters

57
 Tanktop Mounted Suction & Return Line Filters - Types SR1 & SR2

Suction Return Series

Pressure Drop Curves (Type SR1)

The recommended level of the initial pressure drop is approximately 1 bar.

If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
The total !p = Housing !ph + (Element !pe x working viscosity/32).

SRL1 Empty Housing (Length Code 2) SRL1 (Element Length Code 2)

Flow (US GPM) Flow (US GPM)

0 13 39 53 66 0 7 13 20 26 33 39
1 14.5 0.3 4.35
0.9 13.1 10Q
0.8 11.6 0.25 3.63
0.7 10.2 20Q
0.2 2.90
Δp (PSID)

Δp (PSID)
0.6 8.7
Δp (bar)

Δp (bar)
0.5 7.3 0.15 2.18
0.4 5.8
0.3 4.4 0.1 1.45
0.2 2.9
0.05 0.73
0.1 1.5
0 0 0 0
0 50 100 150 200 0 25 50 75 100 125 150
Flow (l/min) Flow (l/min)

Curves are based on 32cSt fluid viscosity and 0.87 Kg/l density.

Pressure Drop Curves (Type SR2)

Curves are based on 32cSt fluid viscosity and 0.87 Kg/l density.

SRL2 Empty Filter Housing SRL2 Filter Element Length 2

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 0 13 26 39 53 66
1.0 14.5 0.35

0.3 4.4
0.8 11.6 10Q
Empty Housing 0.25
Δp (PSID)

Δp (PSID)

0.6 8.7
Δp (bar)

Δp (bar)

0.2 2.9
20Q
0.4 5.8 0.15

0.1 1.5
0.2 2.9
0.05

0 0 0 0
0 50 100 150 200 250 0 50 100 150 200 250
Flow (l/min) Flow (l/min)

58 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 6
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings return suction options elements
SRL1210QLBPGG161 130 SRL1 Length 2 10 Nitrile Plugged 1.7 Bar (25 Psi) G1 G3/4 None 937984Q SRE12Q10
SRL1220QLBPGG161 130 SRL1 Length 2 20 Nitrile Plugged 1.7 Bar (25 Psi) G1 G3/4 None 937985Q SRE12Q20
SRL2210QLBPGG201 SRL22Q10NP1B10 250 SRL2 Length 2 10 Nitrile Plugged 1.7 Bar (25 Psi) G11/4 2xG11/4 None 937946Q SRE22Q10
SRL2220QLBPGG201 SRL22Q20NP1B10 250 SRL2 Length 2 20 Nitrile Plugged 1.7 Bar (25 Psi) G11/4 2xG11/4 None 937947Q SRE22Q20
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Configurator example SR filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
SRL2 2 05QL B S6 G 2G20 I

Box 1 Highlights Key (Denotes part number availability)

Code 123 Item is standard
Model Code 123 Item is standard green option
SR1 Series with LEIF® element SRL1 123 Item is semi standard
SR2 Series with LEIF® element SRL2 123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks

Box 2 Box 3
Filter type Degree of filtration
Housing Code Element
Reduced length on request LEIF®
Standard length 2 Q3 glassfibre ßx(c) >200
Extended length on request
Code Code Code Code
LEIF® 02QL 05QL 10QL 20QL

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Pressure gauge, setting 2.0 bar, G1/8 G5 1.7 bar G
Fluoroelastomer V Pressure switch 42V, 2.0 bar setting, NO with G1/8 BSP S6 2.5 bar I
Pressure switch 42V, 2.0 bar setting, NC with G1/8 BSP S7 Blocked bypass on request
Pressure switch 250V, NO/NC with G1/8 on request Other bypass settings on request
No indicator, indicator ports not machined N
No indicator, indicator port R plugged P
No indicator, indicator ports L + R plugged on request
Vacuum switch / vacuum gauge on request
Other settings for indicators / gauges on request on request

Box 7 Box 8
Filter connection Options
Ports Code Note Options Code
Return port 1 x G1 (ISO228) + Suction port 1 x G3/4 (ISO228) G16 SRL1 None 1
Return port 1 x G11/4 (ISO228) + Suction port 2 x G1 (ISO228) G20 SRL2 Strainer 120 micron G
Return port 2 x G11/4 (ISO228) + Suction port 2 x G1 (ISO228) 2G20 SRL2 Dipstick 6
Return port 1 x SAE20 + Suction port 2 x SAE16 S20 SRL2 Plugged vent port in cover H
Return port 2 x SAE20 + Suction port 2 x SAE16 2S20 SRL2 Strainer 120 micron, dipstick and plugged vent port I
Customized options on request

Spare elements
Replacement Supersedes
Degree of filtration elements
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media 937942Q SRR12Q05N Semi standard
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
code 937943Q SRR12Q10N Standard
% efficiency, based on the above beta ratio (ßx) 937944Q SRR12Q20N Standard
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% 937945Q SRE22Q05 Semi standard
N/A N/A N/A N/A N/A 4.5 02Q/02QL 937946Q SRE22Q10 Standard
N/A N/A 4.5 5 6 7 05Q/05QL 937947Q SRE22Q20 Standard
N/A 6 8.5 9 10 12 10Q/10QL 937983Q SRE12Q05 Semi standard
6 11 17 18 20 22 20Q/20QL 937984Q SRE12Q10 Standard
937985Q SRE12Q20 Standard
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Low pressure filters
59
 Spin-on Filters

Maxiflow Series
MAX 360 I/min - 10 bar

Low pressure filters

61
 Spin-on Filters

Maxiflow Series
Features & Benefits

Features Advantages Benefits

Integrated indicator Compact and robust durable construction Easy identification of element status
High quality paint for canisters Long term protection against corrosion Improved protection of filter medium
Spin-on filters available for suction Flexible product offering Standardisation of components
and return line filtration
High quality filter medium Filter medium suitable for fatigue load due to Extended element life time
high frequent flow fluctuation

Typical Applications

Telescopic handlers
Refuse vehicles
Road sweepers
Compactors
Industrial power units
Grass cutters
Press brakes

The Parker Filtration Maxiflow Full Flow

Filters for Suction or Return.
Maxiflow type MXA8 and MXA9 feature two
integral red/green indicators incorporated into the
head. Fitted as standard, they ensure maximum
indicator visibility and early warning of filter
condition.
Maxiflow type MXA7 features one integral indicator.

62 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 7
Specification

Preferred Series MXA PS Series

Maximum working pressure: 10 bar 10 bar
Filter head material: Aluminium LM24 Aluminium alloy
Filter bowl material: Steel Steel
Seal material: Nitrile Buna (nitrile)
Operating temperature range: -30°C to +90°C -30°C to +110°C
Bypass: Return line 1.05 bar Return line 1.5 bar
Suction line 0.17 bar Suction line 0.10 bar
No bypass option No bypass option
Fluids: Mineral oils Mineral oils
Element media: Microglass III media Microglass III media
Cellulose media Cellulose media

Installation Details

MXA.8/MXA.9*** 12PS/22PS MXA.7***

2 mounting holes
‘L’
F
F Ø129
H
Inlet
G
B

70
F H
A
B

C
A

J
123 (4.84) 70 Minimum for
102 (4.01) (2.75) element removal
D

(0.79)
20

Element removal
12PS-15
22PS-20

ØJ clearance
Minimum for element
removal 2 mounting holes
‘L’
20

D
C

H K
Minimum for
(0.79)

element removal
20
K

M 2 ports 1/8” BSPT for

optional indicators
B
Ø54 (2.12)

Filter selection
To select the correct filter use the appropriate
pressure drop graphs. For details and an example
A

of how to select the correct filter, see next page.

Circuit symbol

Type A B C D F G H J K L M
19 147 173 95 97 38 94 88 72
MXA.8 (0.75) (5.79) (6.81) (3.74) (3.82) (1.49) (3.7) (3.46) (2.83)
G/ 3 4
22 165 187 95 38 93 107
12PS (0.86) (6.49) (7.36) (3.74) N/A (1.49) (3.66) (4.21) M8 x N/A
1.25 x 16
30 179 213 133 129 50 127 130 full depth 72
MXA.9 (1.18) (7.04) (8.38) (5.24) (5.08) (1.97) (5.0) (5.12) (2.83)
G1 /1 4
28 208 236 133 50 130
22PS (1.10) (8.19) (9.29) (5.23)
N/A
(1.97) (5.12)
N/A N/A
430 179 214 140 65 127
MXA.7 G11/2 (16.93) (7.05) (8.42) (5.51)
N/A
(2.56) (5.0) M10 x 1.5

Low pressure filters

63
 Spin-on Filters

Maxiflow Series
Pressure Drop Curves

The recommended level of the initial pressure drop for low pressure filters is max 0.5 bar.
If the medium used has a viscosity different from 30cSt, pressure drop over the filter can be estimated as follows:
!p = (!p30 x viscosity of medium used) / 30cSt.

Maxiflow (MXA.8*** Series) and 12PS Series

Filter Housing Filter Element

Flow (US GPM) Flow (US GPM)

0 3 5 8 11 13 16 18 21 24 26 29 31 0 3 5 8 11 13 16 18 21 24 26 29 31
1.0 14.5 0.5 7.3

0.8 11.6 0.4 5.8

10µ Abs

Δp (PSID)
Δp (PSID)

0.6 8.7 Δp (bar) 0.3 4.4

Δp (bar)

10µ Nom
0.4 5.8 0.2 2.9

0.2 2.9 0.1 1.5

0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 0 10 20 30 40 50 60 70 80 90 100 110 120
Flow (l/min) Flow (l/min)

Maxiflow (MXA.9*** Series) and 22PS Series

Filter Housing Filter Element

Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 37 42 47 53 58 61 0 5 11 16 21 26 31 37 42 47 53 58 64
0.4 5.8 1.0 14.5

0.8 11.6
0.3 4.4

Δp (PSID)
Δp (PSID)

0.6 8.7
Δp (bar)
Δp (bar)

10µ Abs
0.2 2.9
0.4 5.8
10µ Nom
0.1 1.5
0.2 2.9

0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 0 20 40 60 80 100 120 140 160 180 200 220 240
Flow (l/min) Flow (l/min)

Maxiflow (MXA.7*** Series)

Filter Housing Filter Element

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 0 13 26 39 53 66 79 92 106
0.7 10.2 0.8 11.6

0.6 0.7 10.2

8.7
0.6 8.7
0.5 7.3
0.5
Δp (PSID)

7.3
Δp (PSID)

Δp (bar)

10µ Abs
Δp (bar)

0.4 5.8
0.4 5.8
0.3 4.4 10µ Nom
0.3 4.4
0.2 2.9 2.9
0.2
0.1 1.5 0.1 1.5

0 0 0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
Flow (l/min) Flow (l/min)

Note: All above data is calculated at 30cSt Rel density 0.856.

64 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 7
Ordering Information

MAOP Flow Media Replacement

Type Part number Description Ports
(bar) (l/min) rating element

MXA.8*** & 12PS Return Line Filters

MXA MXA8551424 Assembly with bypass & dual visual indicators 10 micron
PS 12PS10BTV1R2B Assembly with bypass & gauge type visual indicators 10 70 abs. G3/4 MXR8550

MXA MXA8511424 Assembly with bypass & dual visual indicators

12PS10CTV1R2B Assembly with bypass & gauge type visual indicators 10 micron MX1518410
10 70 G3/4
PS 12PS10CTE2R2B Assembly with bypass & electrical pressure indicator nom. (x4*)
12PS10CTPR2B Assembly with bypass & no indicator

MXA.8*** & 12PS Suction Line Filters

MXA MXA8511223 Assembly with bypass & dual visual indicators
PS 12PS10CTV1S4B Assembly with bypass & gauge type visual indicator 10 micron MX1518410
10 20 G3/4
MXA MXA8510223 Assembly without bypass, with dual visual indicators nom. (x4*)
PS 12PS10CTV1SX4B Assembly without bypass, with gauge type visual indicator

MXA.9*** & 22PS Return Line Filters

3 micron
MXA MXA9561424 Assembly with bypass & dual visual indicators 10 30 G11/4 MXR9560
abs.
3 Micron abs. filtration for Off-Line and Bypass System Clean Up
Maxiflow 3 micron elements are ideal for off-line or bypass clean up applications. These can be specified for the 9*** and 7*** series return line filters

MXA MXA9551424 Assembly with bypass & dual visual indicators

10
PS 22PS10BTV1R2D Assembly with bypass & gauge type visual indicators
10 180 micron G11/4 MXR9550
PS 22PS10BTE2R2D Assembly with bypass & electrical pressure indicator
abs.
PS 22PS10BTPR2D Assembly with bypass & no indicator
MXA MXA9511424 Assembly with bypass & dual visual indicators
10
PS 22PS10CTV1R2D Assembly with bypass & gauge type visual indicator MX1591410
10 180 micron G11/4
PS 22PS10CTE2R2D Assembly with bypass & electrical pressure indicator (x4*)
nom.
PS 22PS10CTPR2D Assembly with bypass & no indicator

MXA.9*** & 22PS Suction Line Filters

MXA MXA9511223 Assembly with bypass & dual visual indicators
10
PS 22PS10CTV2S4D Assembly with bypass & gauge type visual indicator MX1591410
10 48 micron G11/4
MXA MXA9511023 Assembly without bypass, with visual indicators (x4*)
nom.
PS 22PS10CTPSX4D Assembly without bypass, no indicator

MXA.7*** Return Line Filters

10 micron
MXA MXA7551424 Assembly with bypass & dual visual indicators 10 300 G11/2 MXR9550
abs.

10 micron MX1591410
MXA MXA7511424 Assembly with bypass & dual visual indicators 10 350 G11/2
nom. (x4*)

MXA.7*** Suction Line Filters

MXA7551223 Assembly with bypass & visual indicators 10 micron
MXA 10 80 G11/2 MXR9550
MXA7551023 Assembly without bypass with visual indicators abs.

MXA7511223 Assembly with bypass & visual indicators 10 micron MX1591410

MXA 10 80 G11/2
MXA7511023 Assembly without bypass with visual indicators nom. (x4*)
The Maxiflow Series 7*** can be specified with additional visual or electrical indicators. Please consult Parker Filtration for details

Note: Elements marked with (x4*) are only available in packs of 4

Low pressure filters

65
 Suction Filters

ATZ Series MAX 300 I/min

Low pressure filters

67
 Suction Filters

ATZ Series
Features & Benefits

Features Advantages Benefits

Cast aluminium construction Compact and robust durable construction Suitable for heavy duty industrial
applications
Integrated check valve Filter element can be changed when the filter Improved protection of sophisticated
housing is submerged under the oil in the tank pumps
Magnetic pre-filtration Removes ferrous particles, even during bypass Improved fluid cleanliness levels
conditions Extended element life time
In-to-Out filtration All captured contamination retains inside the No recontamination of system during
element change of elements
Wide range of vacuum Continuous filter condition monitoring Contributes to just-in-time service
measurement devices
Improved protection of pump
when pressure measurement
device connected with pump drive
management

Typical Applications

Wool untangling machine

Hydraulic winch
Power packs with
sophisticated pumps
Drilling blocks

The Parker Filtration ATZ Series Submersible

Suction Filters.
ATZ Filters are located below the tank’s oil level, offering
maximum protection for the hydraulic system pump. When
removing the element, the check valve closes automatically,
eliminating any chance of oil leakage. Pre-filtration takes
place by means of a magnet column. Thanks to the ‘In-to-
Out’ filter principle, contaminated oil cannot leak back into
the system. ATZ Filters are capable of handling flow rates
up to 300 l/min.

68 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 8
Specification

Operating pressure: Degree of filtration:

Vacuum. Determined by multipass test according to ISO 16889.
Assembly: Flow fatigue characteristics:
Suction line filter, mounted horizontally Filter media is supported so that the optimal fatigue life is achieved.
against tank side. Filtration media:
Connections: Microglass III.
Threads G11/2 (ISO 228) or flanges 2” 10µ cellulose and 40µ Stainless Steel.
SAE-300PSI. Element collapse rating:
Filter housing: 10 bar (ISO 2941).
Aluminium. Pressure indicator options:
Seal material: 0.15 bar or 0.30 bar (vacuum gauge).
Nitrile, neoprene, fluoroelastomer. 125-250VAC (LI-0, 5A, Lr-2, 0A) (electrical vacuum switch).
Operating temperature range: 12-28Vdc (Li-1, 0A, Lr-3, 0A) (electrical vacuum switch).
-40˚ to +120˚C. Features:
Bypass valve: Unique check valve, enabling element change below oil level.
Blocked. Filter element:
Element with steel end caps.

Protective cover
ATZ-120 ATZ-300
1 1
2 2

3
3

4
74

4
55

5 24 A/F
5
6 17
6
18 17
9

18
M10x1 Ø28

7
8 7

9
8
10 9 ATZ-120 & ATZ-300
11 Ref. No. Description Ref. No. Description
10 1 1 Bolt 10 1 Valve support
11 2 1 Seal ring 11 1 Nut
3 1 Insert 12 1 O-ring
12
4 1 O-ring 13 1 Valve
12
13 5 1 Element 14 1 Ring
14
13 6 1 O-ring 15 1 Spring
14 7 1 Filter-housing 16 1 Valve-housing
15
15 8 1 Gasket 17 1 Bonded seal
16
16 9 1 O-ring 18 1 Indicator

Low pressure filters

69
 Suction Filters

ATZ Series
Specification (cont.)

ATZ-120
Ø160

300
Min element clearance
140
Ø8.5

ISO 228 G1 (BSP)

ISO 228 G1 (BSP)
Indicator

Visual 100
Elect 135
PCD 140
55

32
5

19

76
403

+1
Ø125 0
Tankhole ISO 228 G11/2 (BSP)

Max torque-load
270

filter-tank 18Nm
277

The Parker suction filters, type ATZ, are designed for

submerged operation. The filters contain a unique check valve
which automatically closes when the filter insert is removed
from the housing, thus enabling element change below oil level.
Construction is based on the field proven Parker Filter System.
Ø110

ATZ-300
224
Indicator
300

Min element clearance

ISO 228 G11/2 (BSP)
ISO 228 G11/2 (BSP)

Ø11
Visual 130
Elect 155
PCD 195

55
70

19
111
8

398

+1
Ø170 Tankhole 0

Ø218 A A
21/2” SAE (3000psi)
Max torque-load
filter-tank 45Nm
236

M12
89
50.8

Ø63 View A-A

70 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 8
Pressure Drop Curves

The recommended level of the initial pressure drop for suction filters is 0.03 bar.
If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows:
!p = (!p32 x viscosity of medium used) / 32cSt.
Filter housing and element pressure drop based on 32cSt fluid viscosity and 0.87 density.

ATZ 1-120 (G11/2) Empty Housing ATZ 300 (21/2 SAE FLANGE) Empty Housing
Flow (US GPM) Flow (US GPM)

0 3 5 8 11 13 16 18 21 24 26 29 31 34 0 13 26 39 53 66 79 92
0.05 0.73 0.05 0.73

0.04 0.58 0.04 0.58

Δp (PSID)
Δp (PSID)

0.03 0.44 0.03 0.44

Δp (bar)
Δp (bar)

0.02 0.29 0.02 0.29

0.01 0.15 0.01 0.15

0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 50 100 150 200 250 300 350
Flow (l/min) Flow (l/min)

ATZ120 Filter Element Length 1 ATZ300 Filter Element Length 2

(cellulose and stainless steel)
Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 37 0 13 26 39 53 66 79 92
0.8 11.6 0.08 1.16
0.7 10.2 0.07 1.02
02Q
0.6 8.7 0.06 0.87
05Q

Δp (PSID)
0.5 7.3 0.05 0.73
Δp (PSID)
Δp (bar)

Δp (bar)

10C
0.4 5.8 0.04 0.58
10Q
0.3 4.4 0.03 040W 0.44
20Q 0.29
0.2 2.9 0.02
120W 0.15
0.1 1.5 0.01
0 0 0 0
0 20 40 60 80 100 120 140 0 50 100 150 200 250 300 350
Flow (l/min) Flow (l/min)

ATZ120 Filter Element Length 1 ATZ300 Filter Element Length 2

(cellulose and stainless steel)
Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 31 37 0 13 26 39 53 66 79 92
0.2 2.9 0.7 10.2
02Q
0.6 8.7
0.15 2.18 0.5 7.3
Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.4 5.8
0.1 1.5 05Q
10C 0.3 4.4
10Q
0.2 2.9
0.05 0.73
040W 20Q
0.1 1.5
120W
0 0 0 0
0 20 40 60 80 100 120 140 0 50 100 150 200 250 300 350
Flow (l/min) Flow (l/min)

Low pressure filters

71
 Suction Filters

ATZ Series
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Included Replacement Supersedes
(l/min) number length rating (µ) settings options elements
ATZ110CBP1XG241 ATZ120-G11/2 FXX1-R-10 B M 120 ATZ120 Length 1 10 NOM Nitrile Plugged Blocked G11/2" None 937958 FXX1-R-10
ATZ110QBP1XG241 ATZ120-G11/2 FXW1-R-10 B M 120 ATZ120 Length 1 10 ABS Nitrile Plugged Blocked G11/2" None 937964Q FXW1-R-10
ATZ210CBP1XR481 ATZ300-S21/2-C FXX3-10 B M 300 ATZ300 Length 2 10 NOM Nitrile Plugged Blocked 21/2" SAE-3000 PSI None 937959 FXX3-10
ATZ210QBP1XR481 ATZ300-S21/2-C FXW3-10 B M 300 ATZ300 Length 2 10 ABS Nitrile Plugged Blocked 21/2" SAE-3000 PSI None 937965Q FXW3-10
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Configurator example ATZ filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
ATZ 2 10C B U2 X R48 1

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
ATZ Housing Code Element media Glass fibre
ATZ 1-120 1 Microglass III (for disposable elements)
ATZ 2-300 2 Cellulose Wire mesh
Nom. rating Abs. rating
Disposable element 10C 02Q 05Q 10Q 20Q 040W

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Code
Nitrile B Vacuum gauge, setting -0.15 bar, M10x1 U1 Blocked bypass X
Fluoroelastomer V Vacuum gauge, setting -0.3 bar, M10x1 U2
Neoprene N Vacuum switch 42V, -0.15 bar setting, NO/NC, M10 x 1 V1
Vacuum switch 42V, -0.30 bar setting, NO/NC, M10 x 1 V2
Vacuum switch 250 VAC, -0.15 bar setting, NO/NC, M10 x 1 V3
Vacuum switch 250 VAC, -0.30 bar setting, NO/NC, M10 x 1 V4
No indicator, indicator ports not machined N
No indicator, indicator port plugged P
Other settings for indicators / gauges on request on request

Box 7 Box 8
Filter connection Options
Ports Code Options for ATZ 1-120 Code
G11/2" + 2 x G1" (For ATZ 1-120 only) G24 1 x G11/2" + 1 x G1" plugged 1
21/2" SAE-3000 PSI +2 x G11/2" (For ATZ 2-300 only) R48 Not plugged Q
1 x G1" right plugged R
2 x G1" left & right plugged P
Special on request
Highlights Key (Denotes part number availability)
123 Item is standard Options for ATZ 2-300
123 Item is standard green option 1 x SAE16 plugged 1
123 Item is semi standard Not plugged Q
123 Item is non standard Special on request
Note: Standard items are in stock, semi standard items are
available within four weeks Visual indicator
Setting -0.3 bar
Thread connection M10x1
Code FMUV2VBMM10L
Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media Electrical switch
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000 Setting -0.3 bar
code Thread connection M10x1
% efficiency, based on the above beta ratio (ßx)
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Switch type NO or NC
N/A N/A N/A N/A N/A 4.5 02Q Elec.connection AMP terminal 6.3x0.8
N/A N/A 4.5 5 6 7 05Q Protection IP54 (terminal IP00)
N/A 6 8.5 9 10 12 10Q Performance 125-250 VAC (Li 0,5A, Lr 2,0A max)
6 11 17 18 20 22 20Q 12-28 Vdc (Li 1,0A, Lr3,0A max)
Code FMUU2VBMM10L
Spare element table
Note 1: Part numbers featured with bold highlighted codes
ATZ 1-120 FXX1-R-10 FXW1-R-2 FXW1-R-5 FXW1-R-10 FXW1-R-20 SF1-R-40
will ensure a ‘standard’ product selection.
Part number spare element 937958 937960Q 937962Q 937964Q 937966Q 937967 Note 2: Alternate displayed part number selection will
ATZ 2-300 FXX3-10 FXW3-2 FXW3-5 FXW3-10 FXW3-20 SF3-40 require you to contact Parker Filtration for availability.
Part number spare element 937959 937961Q 937963Q 937965Q 937966Q 937968

72 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 8
 Medium Pressure Filters

15/40/80CN Series
MAX 600 I/min - 70 bar

NG
RI
TU
FEA

Medium pressure filters

73
 Medium Pressure Filters

15/40/80CN Series
Features & Benefits

Features Advantages Benefits

56 bar fatigue rating Ability to provide reliable service under tough cyclic Reduced downtime due to premature
(eight times that of a spin-on) operating conditions filter failures
Can be utilised in applications where high pressure Reduced costs, better “fit” for the application
filters may have been only option
Diametral (side) seal between head Proven reliability in cyclic applications No downtime, no leaks
and bowl Reduced importance of bowl torque Performs with “real world” service
Dust seal Prevents contamination from building up on bowl/head threads Easier service, eliminates thread galling
40CN-2 meets automotive HF3 standard Automotive industry acceptance Satisfies specifications without need for
15CN meets automotive HF2 standard further testing and/or approval
Cast aluminium head Low profile, lightweight and durable Less weight, smaller envelop and cleaner
appearance
Reinforced Microglass III replacement Multi-layered design produced high capacity Great performance value
elements and efficiency Reliable performance throughout element life
Wire support reduces pleat bunching, keeps Reduces downtime, maximises element life
performance consistent
Complete performance data disclosure All pertinent information is provided in an easy-to- No hidden deficiencies
compare format Easy selection of proper filtration
Visual, electrical or electronic indicators Check element condition at a glance Optimise element life, prevent bypassing
available Right style for the application Matches your system electrical connections
Coreless Ecoglass III replacement No metal content in element Environmentally friendly disposal by incineration
elements Reduced overall weight of 50% Lower element replacement costs
Easy compaction of used elements Lower disposal cost
Conversion kits available: new bowl with permanent core Retrofit coreless design to housings already installed

Typical Applications

Compressor lube oil

Off-line filter loops
Machine tools (Automotive standard)
Hydrostatic drive charge pumps
Mobile equipment
Pilot lines for servo controls
Oil patch drilling equipment
Injection moulding

The Parker Filtration 15/40/80CN Series

Medium Pressure Filters.
This partial list of applications for Parker “CN” Series Filters
has a common factor, the need for an economical, medium
pressure range filter with excellent fatigue pressure ratings.
Prior to the availability of the “CN” filter, applications such as
those listed were restricted by limitations of a spin-on can,
or forced into the higher-cost range of high pressure filters.
The “CN” Series fills this gap and is now available with
environmentally friendly Ecoglass III elements.

74 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 9
Specification

Pressure ratings: Flow fatigue characteristics:

Maximum allowable operating pressure: 70 bar Filter media is supported so that the optimal fatigue life is achieved
Rated fatigue pressure: 56 bar (ISO 3724).
Connections: Microglass III (available by request)
Several threaded port options available, flange faced ports available Supported with epoxy coated metal wire mesh, end cap material
on 80CN. reinforced composite and metal inner core.
Connection style Model Collapse rating 20 bar (ISO 2941).
15CN 40CN 80CN
BSPF(G) 1”, 3/4” 11/4”, 11/2” 11/2”, 2” Ecoglass III
SAE 12, 16 16, 24 24, 32 Supported with plastic net, end cap material reinforced composite.
ISO 6149 M27 M33 M42, M48 No metal parts. Collapse rating 10 bar (ISO 2941).
Metric 3000-M 2” Filter element can only be used together with bowl including Eco-adaptor.
Note: Ecoglass III contributes to ISO 14001 quality.
Filter housing:
Head material aluminium. Indicator options:
Bowl material hard anodized aluminium. - visual M3.
- electrical T1.
Seal material: - electronic F1(PNP).
Nitrile or fluoroelastomer. - electronic F2(NPN).
Operating temperature range: For indicator details see catalogue section 6.
-20°C to +100°C. Weights (kg):
Bypass valve & indicator settings: Model Length 1 Length 2
Table following gives bypass valve and corresponding indicator setting. 15CN 1.1 1.6
Bypass Indicator 40CN 2.0 2.5
1.7 bar 1.2 bar 80CN 5.6 6.9
3.5 bar 2.5 bar Fluid compatibility:
Filter element: Suitable for use with mineral and vegetable oils, and some synthetic
Degree of filtration: oils. For other fluids, please consult Parker Filtration.
Determined by Multipass-test according to ISO 16889.

15CN H 40CN H 80CN H N

I
N J N J

L F
F L L
F
G
G
K
G K
K
J
I
I

M
M
D M D
D

C
C C

Length 1 Length 1
A Length 1
A A
Length 2 Length 2
B P Length 2
B B
P
P

Element removal Element removal SAE - 4

clearance clearance 25.4 (1.00) SAE - 4
25.4 (1.00) SAE - 4 Nominal Hex Drain plug Drain plug
65mm (2.50”) Drain plug 65mm (2.50”)
Nominal Hex E Element removal
clearance 25.4 (1.00)
E 65mm (2.50”) Nominal Hex
E

Dimensions in mm (inch)
Model A B C D E F G H I J K L M* N P
15CN 156.6 250.7 46.5 25.4 71.1 85.9 73.2 82.6 38.1 22.9 42.9 36.6 53 4xM6-1.0x7.9 deep 20-27 Nm
(6.17) (9.87) (1.83) (1.09) (2.80) (3.38) (2.88) (3.25) (1.50) (0.90) (1.69) (1.44)
40CN 170.8 262.4 62.0 32.6 107.2 127.0 111.0 121.9 62.0 31.8 58.8 60.2 53 4xM8-1.25x13 deep 57-68 Nm
(6.73) (10.33) (2.44) (1.28) (4.22) (5.00) (4.37) (4.80) (2.44) (1.25) (2.32) (2.37)
80CN 280.9 401.6 77.7 49.5 124.8 158.7 82.6 151.4 101.6 41.1 79.4 41.3 69 4xM8-1.25x16 deep 80-95 Nm
(11.06) (15.81) (3.06) (1.95) (4.91) (6.25) (3.25) (5.96) (4.00) (1.62) (3.12) (1.63)
Note: add 45mm for T and F indicators
Medium pressure filters
75
 Medium Pressure Filters

15/40/80CN Series
80CN Flange Face Details (SAE 2” 3000-M)

Flange face
mounting holes
M12-1.75 x 22 deep

42.8
21.4

38.9

77.8

Pressure Drop Curves

With 1.7 bar bypass the recommended initial pressure drop is max 0.5 bar.
With 3.5 bar bypass the recommended initial pressure drop is max 1.0 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
The total !p = housing !ph + (element !pe x working viscosity/30).

15CN-1 Elements 15CN Empty Housing

Flow (US GPM) Flow (US GPM)

0 5 10 15 20 25 0 5 10 15 20 25
25 25

1.5 1.5
20 20
05QE
Δp (PSID)
Δp (PSID)

15 15
Δp (bar)
Δp (bar)

1.0 1.0
02QE 10QE
10 10
20QE 3/4” Nominal Port Size
0.5 0.5
5 5
1” Nominal Port Size
0.0 0 0.0 0
0 20 40 60 80 100 0 20 40 60 80
Flow (l/min) Flow (l/min)

15CN-2 Elements
Flow (US GPM)

0 5 10 15 20 25
25

1.5
20
02QE
Δp (PSID)

15
Δp (bar)

1.0

05QE 10
0.5
10QE 5
20QE

0.0 0
0 20 40 60 80 100
Flow (l/min)

76 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 9
Pressure Drop Curves

40CN-1 Elements 40CN Empty Housing

Flow (US GPM) Flow (US GPM)

0 10 20 30 40 50 60 70 0 20 40 60 80 100
25 25
02QE
1.5 1.5
20 20
05QE
1” Nominal Port Size

Δp (PSID)

Δp (PSID)
15 15
Δp (bar)

Δp (bar)
1.0 1.0
10QE
10 10
0.5 0.5
20QE 5 11/2” Nominal Port Size 5

0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300 350
Flow (l/min) Flow (l/min)

40CN-2 Elements
Flow (US GPM)

0 10 20 30 40 50 60 70
25

1.5
20
02QE
Δp (PSID)

15
Δp (bar)

1.0
05QE
10
0.5
10QE 5
20QE
0.0 0
0 50 100 150 200 250 300
Flow (l/min)

80CN-1 Elements 80CN Empty Housing

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 0 30 60 90 120 150 159

25 25

1.5 1.5
20 20
02QE 05QE
Δp (PSID)

Δp (PSID)
15 15
Δp (bar)

Δp (bar)

1.0 1.0

10 10
10QE 11/2” Nominal Port Size
0.5 0.5
5 5
20QE
2” Nominal Port Size
0.0 0 0.0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
Flow (l/min) Flow (l/min)

80CN-2 Elements
Flow (US GPM)

0 26 53 79 106 132 159

25

1.5
20
Δp (PSID)

15
Δp (bar)

1.0
02QE
05QE 10
0.5
10QE 5
20QE
0.0 0
0 100 200 300 400 500 600
Flow (l/min)

Medium pressure filters

77
 Medium Pressure Filters

15/40/80CN Series
Element Service

A. Stop the system’s power unit. CN Filters Parts List

B. Relieve any system pressure in the filter line.
Index Description
C. Drain the filter bowl if drain port option is provided.
1 Head
D. Loosen and remove bowl. 2 Indicators
E. Remove element by pulling downward with a slight M3-visual auto reset: 1.2 bar
twisting motion and discard. M3-visual auto reset: 2.5 bar
F. Check bowl o-ring and anti-extrusion ring for 3 T1-electrical: 1.2 bar c/w DIN 43650 connector
damage and replace if necessary. T1-electrical: 2.5 bar c/w DIN 43650 connector
F1-electronic PNP with 4 LEDs: 1.2 bar
G. Lubricate element o-ring with system fluid and place
F1-electronic PNP with 4 LEDs: 2.5 bar
on post in filter head. F2-electronic NPN with 4 LEDs: 1.2 bar
H. Install bowl by rotating counter clockwise and tighten F2-electronic NPN with 4 LEDs: 2.5 bar
to specified torque. 4 Bypass valve
15CN – 20-27 Nm (15-20ft. lbs) 1.7 bar assembly
3.5 bar assembly
40CN – 57-68 Nm (42-50ft. lbs)
5 Element (see replacement element part numbers)
80CN – 80-95 Nm (60-70ft. lbs)
6 Bowl
I. Confirm there are no leaks after powering the system.
Single length with drain
Single length with reusable core and drain
Single length without drain
Double length with drain
3 Double length with reusable core and drain
2
Double length without drain
7 Bowl and dust seal
Nitrile
Fluoroelastomer
8 Drain plug: SAE-4
Nitrile
Fluoroelastomer

78 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 9
Ordering Information

Standard products table

Part numbers Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement elements
(l/min) number length rating (µ) settings
15CN110QEVT1KG164 F315CN1R10QETW350C2C219 50 15CN Length 1 10 Fluoroelastomer Electrical 3.5 bar G1" 936700Q
15CN110QEVM3KG164 F315CN1R10QEM250C2C219 50 15CN Length 1 10 Fluoroelastomer Visual 3.5 bar G1" 936700Q
15CN120QEVT1KG164 F315CN1R20QETW350C2C219 80 15CN Length 1 20 Fluoroelastomer Electrical 3.5 bar G1" 936701Q
15CN120QEVM3KG164 F315CN1R20QEM250C2C219 80 15CN Length 1 20 Fluoroelastomer Visual 3.5 bar G1" 936701Q
15CN210QEVT1KG164 F315CN2R10QETW350C2C219 80 15CN Length 2 10 Fluoroelastomer Electrical 3.5 bar G1" 936704Q
15CN210QEVM3KG164 F315CN2R10QEM250C2C219 80 15CN Length 2 10 Fluoroelastomer Visual 3.5 bar G1" 936704Q
15CN220QEVT1KG164 F315CN2R20QETW350C2C219 100 15CN Length 2 20 Fluoroelastomer Electrical 3.5 bar G1" 936705Q
15CN220QEVM3KG164 F315CN2R20QEM250C2C219 100 15CN Length 2 20 Fluoroelastomer Visual 3.5 bar G1" 936705Q
40CN105QEVT1KG244 F340CN1R05QETW350E2E219 120 40CN Length 1 5 Fluoroelastomer Electrical 3.5 bar G11/2" 936707Q
40CN105QEVM3KG244 F340CN1R05QEM250E2E219 120 40CN Length 1 5 Fluoroelastomer Visual 3.5 bar G11/2" 936707Q
40CN110QEVT1KG244 F340CN1R10QETW350E2E219 180 40CN Length 1 10 Fluoroelastomer Electrical 3.5 bar G11/2" 936708Q
40CN110QEVM3KG244 F340CN1R10QEM250E2E219 180 40CN Length 1 10 Fluoroelastomer Visual 3.5 bar G11/2" 936708Q
40CN120QEVT1KG244 F340CN1R20QETW350E2E219 260 40CN Length 1 20 Fluoroelastomer Electrical 3.5 bar G11/2" 936709Q
40CN120QEVM3KG244 F340CN1R20QEM250E2E219 260 40CN Length 1 20 Fluoroelastomer Visual 3.5 bar G11/2" 936709Q
40CN205QEVT1KG244 F340CN2R05QETW350E2E219 200 40CN Length 2 5 Fluoroelastomer Electrical 3.5 bar G11/2" 936711Q
40CN205QEVM3KG244 F340CN2R05QEM250E2E219 200 40CN Length 2 5 Fluoroelastomer Visual 3.5 bar G11/2" 936711Q
40CN210QEVT1KG244 F340CN2R10QETW350E2E219 280 40CN Length 2 10 Fluoroelastomer Electrical 3.5 bar G11/2" 936601Q
40CN210QEVM3KG244 F340CN2R10QEM250E2E219 280 40CN Length 2 10 Fluoroelastomer Visual 3.5 bar G11/2" 936601Q
40CN220QEVT1KG244 F340CN2R20QETW350E2E219 320 40CN Length 2 20 Fluoroelastomer Electrical 3.5 bar G11/2" 936712Q
40CN220QEVM3KG244 F340CN2R20QEM250E2E219 320 40CN Length 2 20 Fluoroelastomer Visual 3.5 bar G11/2" 936712Q
80CN110QEVT1KG324 F380CN1R10QETW350F2F219 370 80CN Length 1 10 Fluoroelastomer Electrical 3.5 bar G2" 936602Q
80CN110QEVM3KG324 F380CN1R10QEM250F2F219 370 80CN Length 1 10 Fluoroelastomer Visual 3.5 bar G2" 936602Q
80CN120QEVT1KG324 F380CN1R20QETW350F2F219 420 80CN Length 1 20 Fluoroelastomer Electrical 3.5 bar G2" 936715Q
80CN120QEVM3KG324 F380CN1R20QEM250F2F219 420 80CN Length 1 20 Fluoroelastomer Visual 3.5 bar G2" 936715Q
80CN210QEVT1KG324 F380CN2R10QETW350F2F219 530 80CN Length 2 10 Fluoroelastomer Electrical 3.5 bar G2" 936718Q
80CN210QEVM3KG324 F380CN2R10QEM250F2F219 530 80CN Length 2 10 Fluoroelastomer Visual 3.5 bar G2" 936718Q
80CN220QEVT1KG324 F380CN2R20QETW350F2F219 600 80CN Length 2 20 Fluoroelastomer Electrical 3.5 bar G2" 936719Q
80CN220QEVM3KG324 F380CN2R20QEM250F2F219 600 80CN Length 2 20 Fluoroelastomer Visual 3.5 bar G2" 936719Q

Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above.

Medium pressure filters

79
 Medium Pressure Filters

15/40/80CN Series
Ordering Information (cont.)

Product Configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
40CN 2 10QE V M3 K G24 4

Box 1 Box 2 Highlights Key (Denotes part number availability)

Code Filter type 123 Item is standard
Model Code Length Code 123 Item is standard green option
Small size MP filter, T-port 15CN Length 1 1 123 Item is semi standard
Medium size MP filter, T-port 40CN Length 2 2 123 Item is non standard
Large size MP filter, T-port 80CN Note: Standard items are in stock, semi standard items are available within four weeks

Box 3 Box 4
Degree of filtration Seal type
Element media Glass fibre Seal material Code
Media code Fluoroelastomer V
Ecoglass III element 02QE 05QE 10QE 20QE Nitrile B
Note: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required.
Filter assemblies with Microglass III elements are available by request

Box 5 Box 6 Box 7

Indicator Bypass valve Filter connection
Code Bypass valve Indicator Code Ports Code
No indicator port N 1.7 bar 1.2 bar G 15CN:Thread G3/4 G12
Visual indicator M3 3.5 bar 2.5 bar K Thread G1 G16
Electrical indicator T1 When filter includes a bypass valve but not an indicator, Thread SAE 12 S12
Plugged with steel plug P code denotes bypass setting. Thread SAE 16 S16
Electronic 4 LED, PNP, N.O. F1 Thread M27, ISO6149 M27
Electronic 4 LED, NPN, N.O. F2 40CN:Thread G11/4 G20
Electronic 4 LED, PNP, N.C. F3 Thread G11/2 G24
Electronic 4 LED, NPN, N.C. F4 Thread SAE 16 S16
Thread SAE 24 S24
Thread M33, ISO6149 M33
Box 8 80CN:Thread G11/2 G24
Options Thread G2 G32
Options Code Thread SAE 24 S24
Standard drain port on bowl 4 Thread SAE 32 S32
Thread M42, ISO6149 M42
Thread M48, ISO6149 M48
SAE flange 2" 3000-M R32

Ecoglass III elements (Fluoroelastomer seals) Seal kits

Model 02QE 05QE 10QE 20QE Model Nitrile Fluoroelastomer*
15CN-1 936698Q 936699Q 936700Q 936701Q 15CN S04449 S04450
15CN-2 936702Q 936703Q 936704Q 936705Q 40CN S04447 S04448
40CN-1 936706Q 936707Q 936708Q 936709Q 80CN S04458 S04459
40CN-2 936710Q 936711Q 936601Q 936712Q
80CN-1 936713Q 936714Q 936602Q 936715Q Replacement element part numbers for conventional assemblies
80CN-2 936716Q 936717Q 936718Q 936719Q
Elements with nitrile seals Elements with Fluoroelastomer seals
Conversion bowl assembly
(to retrofit existing CN filter housings to use coreless elements)
Model 02Q 05Q 10Q 20Q Model 02Q 05Q 10Q 20Q
936758 15CN-1 coreless element bowl assembly 15CN-1 928935Q G04041Q 928934Q 930367Q 15CN-1 932610Q G04189Q 932612Q 930369Q
936759 15CN-2 coreless element bowl assembly 15CN-2 928953Q G04169Q 928952Q 930368Q 15CN-2 932616Q G04190Q 932618Q 930370Q
936760 40CN-1 coreless element bowl assembly 40CN-1 926696Q G04048Q 926835Q 930099Q 40CN-1 926716Q G04191Q 926836Q 930100Q
936761 40CN-2 coreless element bowl assembly 40CN-2 926697Q G04167Q 926837Q 930118Q 40CN-2 926717Q G04192Q 926838Q 930119Q
936763 80CN-1 coreless element bowl assembly 80CN-1 932656Q 932657Q 932658Q 929899Q 80CN-1 932659Q 932660Q 832661Q 929903Q
936764 80CN-2 coreless element bowl assembly 80CN-2 932662Q 932663Q 932664Q 929923Q 80CN-2 932665Q 932666Q 932667Q 929927Q

Degree of filtration Nominal flow (l/min) for filter assembly at viscosity 30cSt
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code Housing, port size 02QE 05QE 10QE 20QE
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000 15CN-1, G1 10 30 50 80
% efficiency, based on the above beta ratio (ßx) Metal free 15CN-2, G1 30 70 80 100
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Ecoglass III 40CN-1, G11/2 60 120 180 260
N/A N/A N/A N/A N/A 4.5 02QE 40CN-2, G11/2 80 200 280 320
N/A N/A 4.5 5 6 7 05QE 80CN-1, G2 150 300 370 420
N/A 6 8.5 9 10 12 10QE 80CN-2, G2 180 420 530 600
6 11 17 18 20 22 20QE * Fluoroelastomers are available under various registered trademarks,
including Viton (a registered trademark of DuPont) and Fluorel (a registered
Please note the bolded options reflect standard options with a reduced lead-time trademark of 3M)
of (4) weeks or less. Consult Parker Filtration on all other lead-time options.

80 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 9
 Medium Pressure Filters

45M/45M Eco Series

MAX 260 I/min - 40 bar

NG
RI
TU
FEA

Medium pressure filters

81
 Medium Pressure Filters

45M/45M Eco Series

Features & Benefits

Features Advantages Benefits

Cast iron head, steel bowl Can be used in applications where aluminium is Approved for engine rooms and mines
not allowed
Rugged construction Reliable filtration in all conditions
Reinforced Microglass III Multi-layered design produced high capacity Great performance value
replacement elements and efficiency Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps
Reduces downtime, maximises
performance consistent
element life
Visual, electrical or electronic Check element condition at glance Optimise element life, prevent bypassing
indicators available Matches your system electrical
Right style for the application
connections
Test points in the filter head Pressure measurement and !p possible Quick testing and maintenance
Coreless Ecoglass III replacement No metal content in element Environmentally friendly disposal by
elements incineration
Reduced overall weight of 50%
Lower element replacement costs
Easy compaction of used elements
Lower disposal costs
Eco adaptors available
Retrofit coreless design to housings
already installed

Typical Applications

Industrial power units

Mobile construction
equipment
Forestry equipment

The Parker Filtration 45M/45 Eco Series

Medium Pressure Filters.
The 45M/45 Eco Series of medium pressure filters
offer an ideal solution to the problem of protecting
system components at lower pressures.
These filters are a realistic, high quality alternative
to low specification spin-on filters. The 45M/45
Eco Series offers high dirt holding capacity, 40 bar
capability and rapid element replacement.

82 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 10
Specification

Pressure ratings: Microglass III:

Maximum allowable operating pressure 40 bar. Supported with epoxy coated metal wire mesh, end cap material
Filter housing pressure pulse fatigue tested: 106 pulses 0-40 bar. reinforced composite and metal inner core.
Collapse rating 20 bar (ISO 2941).
Connections:
Threads G1, G11/4 (ISO 228/1) or flange SAE 11/2” 3000-M. Ecoglass III:
Supported with plastic net, end cap material reinforced composite.
Filter housing: No metal parts. Collapse rating 10 bar (ISO 2941).
Head material cast iron (GSI). Filter element can only be used together with reusable FEA Eco-adapter.
Bowl material steel. Note: Ecoglass III contributes to ISO 14001 quality.
Seal material: Indicator options:
Nitrile or Fluoroelastomer. Indicating differential pressure: 2.5 ± 0.3 bar.
Operating temperature range: - visual M3.
-20° to +100°C - electrical T1.
- electronic F1(PNP).
Bypass valve: - electronic F2(NPN).
Opening pressure 3.5 bar. For indicator details see catalogue section 6.
Filter element: Fluid compatibility:
Degree of filtration: Suitable for use with mineral and vegetable oils, and some synthetic
Determined by Multipass-test according to ISO 16889. oils. For other fluids, please consult Parker Filtration.
Flow fatigue characteristics:
Filter media is supported so that the optimal fatigue life is achieved
(ISO 3724).

Installation Details
Plug M12x1.5

Type A B C Weight (kg) D

Length 1 116 (4.57) 237 (9.33) 192 (7.56) 5.9
Length 2 208 (8.20) 330 (13.00) 285 (11.22) 6.2 G1, G11/4, G11/2, D OUT IN D

Length 3 329 (13.00) 450 (17.72) 405 (15.94) 6.6 Flange SAE 11/2” 3000-M
Length 4 428 (16.85) 550 (21.65) 505 (19.90) 7.0

69.8 4 pcs M12 depth 18

A
(2.75) only model SAE
38 (1.50)
35.7 (1.40)

M10 depth 12
mm
B (inches)
C

132 70
(5.20) (2.75)

66
(2.60)

50 min 39
(2.00) (1.53)
58
(2.28)

Medium pressure filters

83
 Medium Pressure Filters

45M/45M Eco Series

Pressure Drop Curves

The recommended level of the initial pressure drop is max 1.0 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
The total !p = housing !ph + (element !pe x working viscosity/30).

45M Series Empty Housing

Flow (US GPM)

0 6.3 13 19.3 26 32.3 39 45.3 53 59.3 66

1.6 23.2
1.4 20.3
1.2 17.4
1 14.5
Δp (PSID)
Δp (bar)

G16
0.8 11.6
G20
0.6 8.7
0.4 5.8
G24
0.2 R24 2.9
0 0
0 25 50 75 100 125 150 175 200 225 250
Flow (l/min)

45M-1 Element with Microglass III 45M-2 Element with Microglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
02Q
1.2 17.4 1.2 17.4
05Q 10Q 20Q 05Q
1 14.5 1
02Q
14.5
Δp (PSID)

10Q

Δp (PSID)
Δp (bar)

Δp (bar)

0.8 11.6 0.8 11.6

20Q
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

45M-3 Element with Microglass III 45M-4 Element with Microglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3

1.2 1.2
02Q 17.4
17.4
02Q 05Q
1 14.5 1 14.5
Δp (PSID)

10Q 05Q
Δp (PSID)

Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

10Q
0.6 8.7 0.6 8.7
20Q 20Q
0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

84 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 10
 45M-1 Element with Ecoglass III 45M-2 Element with Ecoglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
05QE
1.2 17.4 1.2 17.4
20QE 05QE
02QE 10QE 02QE 10QE
1 14.5 1 14.5

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

20QE
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

45M-3 Element with Ecoglass III 45M-4 Elements with Ecoglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
02QE
1.2 17.4 1.2 17.4
02QE
1 14.5 1 14.5

Δp (PSID)
Δp (PSID)

05QE 05QE
Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

10QE 10QE
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

20QE
20QE
0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

Ordering Information

Standard products table

Product numbers Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement Supersedes
(l/min) number length rating (µ) settings elements
45M110QBPKG161 FF1145.Q010.BS35.GT16 140 45M Length 1 10 Nitrile Plugged 3.5 bar G1" 938962Q FC7005.Q010.BK
45M120QBPKG161 FF1145.Q020.BS35.GT16 160 45M Length 1 20 Nitrile Plugged 3.5 bar G1" 938963Q FC7005.Q020.BK
45M110QEBPKG161 FF1145.QE10.BS35.GT16 140 45M Length 1 10 Nitrile Plugged 3.5 bar G1" 938978Q FC7005.QE10.BK
45M120QEBPKG161 FF1145.QE20.BS35.GT16 160 45M Length 1 20 Nitrile Plugged 3.5 bar G1" 938979Q FC7005.QE20.BK
45M210QBPKG201 FF1146.Q010.BS35.GT20 200 45M Length 2 10 Nitrile Plugged 3.5 bar G11/4" 938966Q FC7006.Q010.BK
45M220QBPKG201 FF1146.Q020.BS35.GT20 220 45M Length 2 20 Nitrile Plugged 3.5 bar G11/4" 938967Q FC7006.Q020.BK
45M210QEBPKG201 FF1146.QE10.BS35.GT20 200 45M Length 2 10 Nitrile Plugged 3.5 bar G11/4" 938982Q FC7006.QE10.BK
45M220QEBPKG201 FF1146.QE20.BS35.GT20 220 45M Length 2 20 Nitrile Plugged 3.5 bar G11/4" 938983Q FC7006.QE20.BK
45M310QBPKG241 FF1147.Q010.BS35.GT24 230 45M Length 3 10 Nitrile Plugged 3.5 bar G11/2" 938970Q FC7007.Q010.BK
45M320QBPKG241 FF1147.Q020.BS35.GT24 250 45M Length 3 20 Nitrile Plugged 3.5 bar G11/2" 938971Q FC7007.Q020.BK
45M310QEBPKG241 FF1147.QE10.BS35.GT24 230 45M Length 3 10 Nitrile Plugged 3.5 bar G11/2" 938986Q FC7007.QE10.BK
45M320QEBPKG241 FF1147.QE20.BS35.GT24 250 45M Length 3 20 Nitrile Plugged 3.5 bar G11/2" 938987Q FC7007.QE20.BK
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.

Medium pressure filters

85
 Medium Pressure Filters

45M/45M Eco Series

Ordering Information (cont.)

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
45M 2 10Q B M3 K G20 1

Box 1 Highlights Key (Denotes part number availability)

Code 123 Item is standard
Model Code 123 Item is standard green option
Medium pressure filter, T-port 45M 123 Item is semi standard
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks
Box 2 Box 3
Filter type Degree of filtration
Length Code Element media Glass fibre
Length 1 1 Media code
Length 2 2 Microglass III element 02Q 05Q 10Q 20Q
Length 3 3 Ecoglass III element 02QE 05QE 10QE 20QE
Length 4 4 Note: When using Ecoglass III elements a bowl with reusable Eco-adaptor is required.

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Indicator Code
Nitrile B Plugged with steel plug P 3.5 bar 2.5 bar K
Fluoroelastomer V Visual indicator M3 No bypass* 7.0 bar N + Box 8: code 2
Electrical indicator T1 No bypass* No indicator (P) X + Box 8: code 2
Electronic 4 LED, PNP, N.O. F1 * High collapse element must be used if MAOP is higher
Electronic 4 LED, NPN, N.O. F2 than element collapse pressure.
Electronic 4 LED, PNP, N.C. F3 When filter includes a bypass valve but not an indicator,
Electronic 4 LED, NPN, N.C. F4 code denotes bypass setting.

Box 7 Box 8
Filter connection Options
Connections Code Length 1 Length 2 Length 3 Length 4 Options Code
Thread G 1 G16 S S S x Standard 1
Thread G 1 1/4 G20 S S S S No bypass 2
Thread G 1 1/2 G24 x S S S
SAE flange 1 1/2" 3000-M R24 x x x x
Availability: S = standard option
x = non-standard, ask for availability

Replacement elements with nitrile seals Nominal flow (I/min) at viscosity 30 cSt - connection size
Media Length 1 Length 2 Length 3 Length 4 Filter length Media G16 G20 G24 & R24
02Q 938960Q 938964Q 938968Q 938972Q Length 1 02Q/02QE 80 80 80
05Q 938961Q 938965Q 938969Q 938973Q 05Q/05QE 120 120 120
10Q 938962Q 938966Q 938970Q 938974Q 10Q/10QE 140 150 150
20Q 938963Q 938967Q 938971Q 938975Q 20Q/20QE 160 180 200
02QE 938976Q 938980Q 938984Q 938988Q Length 2 02Q/02QE 130 150 170
05QE 938977Q 938981Q 938985Q 938989Q 05Q/05QE 150 170 190
10QE 938978Q 938982Q 938986Q 938990Q 10Q/10QE 170 200 230
20QE 938979Q 938983Q 938987Q 938991Q 20Q/20QE 190 220 250
Length 3 02Q/02QE 150 170 190
05Q/05QE 170 190 210
10Q/10QE 190 210 230
20Q/20QE 200 230 250
Length 4 02Q/02QE 170 190 210
05Q/05QE 180 210 230
10Q/10QE 190 220 240
20Q/20QE 200 230 260

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
% efficiency, based on the above beta ratio (ßx) Disposable Metal free
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III Ecoglass III
N/A N/A N/A N/A N/A 4.5 02Q 02QE
N/A N/A 4.5 5 6 7 05Q 05QE
N/A 6 8.5 9 10 12 10Q 10QE
6 11 17 18 20 22 20Q 20QE

86 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 10
 Medium Pressure Filters

130 Eco Series

MAX 1000 I/min - 30 bar

NG
RI
TU
FEA

Medium pressure filters

87
 Medium Pressure Filters

130 Eco Series

Features & Benefits

Features Advantages Benefits

Modular filter system Sizing and performance can be optimised Best filter for every lube application
Duplex type systems with selecting Element change during operation Continuous filtration
valve
Bypass assembly in the filter cover Sediment and other particles at the bottom are No contamination passing into the
away from the flow entering the system system if filter in bypass
Large filtration area High dirt holding capacity Long element life
Air bleed valve Easy air removal after element change Protects bearings and other sensitive
components
Two indicator locations, visual Easy to detect when element replacement Reliable filtration
indicator as standard needed
Coreless Ecoglass III replacement No metal content in element Environmentally friendly disposal by
elements incineration
Reduced overall weight of 50%
Lower element replacement costs
Easy compaction of used elements
Lower disposal costs
Conversion kits available: new bowl with
permanent core Retrofit coreless design to housings
already installed

Typical Applications

Paper production plants

Steel mills
Aluminium mills
Industrial power packs
Lubrication systems
Power generation

The Parker Filtration 130 Eco Series

Medium Pressure Filters.
These high flow return filters are ideal for industrial
applications on hydraulic or lubrication systems with
pressures up to 30 bar and flows up to 1000 l/min
in single units. Multiple filter systems with pressures
up to 16 bar and flows up to 1400 l/min.
The ability to bank multiple filters together in a
“duplex” format enables continuous filtration during
element changes.

88 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 11
Specification

Pressure ratings: Bypass valve:

Maximum allowable operating pressure: Opening pressure 3.5 bar.
Single filters 30 bar. Filter element:
Filter systems 16 bar. Degree of filtration:
Filter housing pressure pulse fatigue tested: 106 pulses 0-25 bar. Determined by Multipass-test according to ISO 16889.
Construction: Flow fatigue characteristics:
Eco-element does not include any metal parts and is supported by Filter media is supported so that the optimal fatigue life is achieved
Eco-adaptor. Conventional elements can be used without removing (ISO 3724).
the Eco-adaptor.
Ecoglass III:
Connections: Supported with plastic net, end cap material reinforced composite.
Single unit connections: No metal parts. Collapse rating 10 bar (ISO 2941).
Flanges SAE 2” 3000-M, SAE 21/2” 3000-M or with adaptor threads Filter element can only be used together with reusable FEA Eco-adapter.
G11/2 or G2. Note: Ecoglass III contributes to ISO 14001 quality.
Dual unit connections: Also available with Microglass III elements. Contact Parker Filtration for
details.
Flanges SAE 3” 3000-M or with adaptor threads G11/2 or G2.
Visual indicator:
Parallel unit and filter system assembly connections: Includes M3, full part number FMUM3KVMU12H as standard.
DN80/PN16 or DN100/PN16. Assembly of two, four six or eight filters to
the same system by using L-bore valve assembly (only one side in use). Optional Indicators (mounted to lower indicator port):
- electrical T1.
Filter housing: - electronic F1(PNP).
Material aluminium. - electronic F2(NPN).
Seal material: For indicator details see catalogue section 6.
Nitrile or Fluoroelastomer. Fluid compatibility:
Operating temperature range: Suitable for use with mineral and vegetable oils, and some synthetic
-20°C to +100°C. oils. For other fluids, please consult Parker Filtration.

102
35

88.9

Installation Details 150

M12 4pcs
126
222

47

Single Assemblies 130M

50.8
102

36
96

Connection options
100 M12 8pcs Direction A
SAE 2” 3000-M
Body flange 200 Torque 50 Nm
SAE 21/2” 3000-M
Ø196 Indicator M3
G11/2 G1/2x2pcs G1/8 Venting valve

Adaptor flange G2
SAE 3” 3000-M (90° elbow)

Weights (kg) Length 2 Length 3

Single 24.5 32.5
Dual D2 70.2 86.2
Parallel P2 75.2 91.2
Length 3=1210
Length 2=650

System S2 111.0 127.0

System S9 204.0 236.0
System S6 261.2 309.2
System S8 341.4 705.4
Dimensions in mm

88.9 Adaptor flange

Indicator
G1/2

port
In
50.8

A
63
42

127
35

128

Torque 50 Nm
Option.
M12 4pcs Adaptor flange can be rotated in 90° steps.
OUT
Torque 50 Nm

Medium pressure filters

89
 Medium Pressure Filters

130 Eco Series

Dual System 130D

G1/2 x 2pcs G1/8 Venting valve

97.5
A
Out

In

218

282
127

Out
191

In

SAE 3” flange SAE 3” flange Ø14

191 226 191
140
Thread flange 35 Thread flange 35
64 218
Connection options
380 Body flange SAE 3” 3000-M
Supported from base Adaptor flange thread G11/2
G2

Parallel System 130N

Type A
G1/2x2pcs G1/8 Venting valve
Length 2 780
Length 3 1340
Dimensions in mm

Out
A

635
In In

Out
291

Port Sizes DN80/PN16 or DN100/PN16

191

Ø14
440
140
100 345
562.5

Supported from base

90 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 11
130S System 1+1 units 130S System 2+2 units

Indicator FPC V Indicator FPC V

734 1372

45 670
540
1122
Drain valve G1/2x2pcs
Drain valve G1/2x2pcs

130S System 3+3 units 130S System 4+4 units

Indicator FPC V

Indicator FPC V

1770 2406

45 670
670
1122
1122
1704
Drain valve G1/2x2pcs
1574 2156

Medium pressure filters

91
 Medium Pressure Filters

130 Eco Series

Valve Assembly Connection - T-Model

G1/2x2pcs G1/8 Venting valve Type A

Length 2 780
Length 3 1340
Dimensions in mm

Out Slow fill valve

A

Out In
191

Indicator port

Ø14

393/403

140

178
In
493/503

Valve supported from base Port sizes DN80/PN16 or DN100/PN16

L-Model C-Model
G1/2x2pcs G1/8 Venting valve
G1/2x2pcs G1/8 Venting valve

Handle turns counter

clockwise

In
A

A
366/376

Out In
191

191

254

Out
Ø14

140
Indicator port Ø14
178 393/403

100 218 140 293/303

462/513 491/501

Valve supported from base

Valve supported from base

92 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 11
Pressure Drop Curves

The recommended level of the initial pressure drop is max 0.8 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
The total !p = housing !ph + (element !pe x working viscosity/30).
130M Eco Single Empty Housing 130S Eco System Empty Housing
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 264 0 53 106 159 211 264 317 370 423
1 14.5 2 29
0.9 1.75 130S3-21
0.8 G24 11.6
1.5 21.8
0.7
G32
Δp (PSID)

Δp (PSID)
0.6 8.7 1.25
Δp (bar)

Δp (bar)
0.5 1 14.5
R40 130S3-41 130S3-61
0.4 5.8 0.75
0.3 130S3-81 7.3
0.5
0.2 2.9
0.1 0.25
0 0 0 0
0 100 200 300 400 500 600 700 800 900 1000 0 200 400 600 800 1000 1200 1400 1600
Flow (l/min) Flow (l/min)

130 Elements 02QE 130 Elements 05QE

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 264 0 26 53 79 106 132 159 185 211 238 264
0.50 7.3 0.50 7.3
0.45 0.45
0.40 5.8 0.40 5.8
0.35 0.35
Length 2

Δp (PSID)
Δp (PSID)

0.30 4.4 0.30 4.4

Δp (bar)
Δp (bar)

Length 3 Length 2 Length 3

0.25 0.25
0.20 2.9 0.20 2.9
0.15 0.15
0.10 1.5 0.10 1.5
0.05 0.05
0.00 0 0.00 0
0 100 200 300 400 500 600 700 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000
Flow (l/min) Flow (l/min)

130 Elements 10QE 130 Elements 20QE

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 238 264 0 26 53 79 106 132 159 185 211 238 264
0.50 7.3 0.50 7.3
0.45 0.45
0.40 5.8 0.40 5.8
0.35 0.35
Δp (PSID)

Δp (psid)

0.30 4.4 0.30 4.4

Δp (bar)

Δp (bar)

0.25 Length 2
0.25
Length 3 Length 2 Length 3
0.20 2.9 0.20 2.9
0.15 0.15
0.10 1.5 0.10 1.5
0.05 0.05
0.00 0 0.00 0
0 100 200 300 400 500 600 700 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000
Flow (l/min) Flow (l/min)

Ordering Information

Standard products table

Part numbers Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement Supersedes
(l/min) number length rating (µ) settings elements
130M210QEBM3KR401 FF1302.QE10.BA35.SL40 700 130M Length 2 10 Nitrile Visual 3.5 bar SAE flange 21/2" 3000-M 938723Q FC1302.QE10.BK
130M220QEBM3KR401 FF1302.QE20.BA35.SL40 800 130M Length 2 20 Nitrile Visual 3.5 bar SAE flange 21/2" 3000-M 938724Q FC1302.QE20.BK
130M310QEBM3KR401 FF1303.QE10.BA35.SL40 950 130M Length 3 10 Nitrile Visual 3.5 bar SAE flange 21/2" 3000-M 938727Q FC1303.QE10.BK
130M320QEBM3KR401 FF1303.QE20.BA35.SL40 1000 130M Length 3 20 Nitrile Visual 3.5 bar SAE flange 21/2" 3000-M 938728Q FC1303.QE20.BK
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.

Medium pressure filters

93
 Medium Pressure Filters

130 Eco Series

Ordering Information (cont.)

Product configurator
Configurator example, single unit:
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
130M 3 10QE B M3 K R40 1
Configurator example, 2+2 system:
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
130S 3 10QE B M3 K D100 41

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
Model Code Length Code Element media Glass fibre
Single unit 130M Length 2 2* Media code
Dual unit 130D Length 3 3 Ecoglass III element 02QE* 05QE 10QE 20QE
Parallel unit 130N * = This option is semi standard on * = This option is semi standard on single units (130M) only
System 130S single units (130M) only Filter assemblies with Microglass III elements are available by request

Box 4 Box 5 Box 6

Seal type Indicator Bypass valve
Seal material Code Code Bypass valve Indicator Code
Nitrile B Visual indicator M3 3.5 bar 2.5 bar K
Fluoroelastomer V Electrical indicator T1
Electronic 4 LED, PNP, N.O. F1
Electronic 4 LED, NPN, N.O. F2
Visual M3 indicator always as standard
Other indicator options are additional and the indicator must be
mounted to lower indicator port.
Box 7 Box 8
Filter connection Options
Connections Code 130M 130D 130N 130S Options Code
Thread G11/2 G24 S x - - 130M: standard 1
Thread G2 G32 S x - - 130D: 2 units 21
SAE flange 2" 3000-M R32 x - - - 3 units 31
SAE flange 21/2" 3000-M R40 S - - - 130N: 1+1 units: L-port 21
SAE flange 3" 3000-M R48 - S - - 2+2 units: L-port 41
DN80 flange D80 - - S S 130S: 1+1 units: T-port 21
DN100 flange D100 - - S S 2+2 units: T-port 41
Availability: S = standard option 3+3 units: T-port 61
x = non-standard, ask for availability 4+4 units: T-port 81
- = not available 1+1 units: L-port 27
2+2 units: L-port 47
3+3 units: L-port 67
4+4 units: L-port 87

Replacement elements with nitrile seals Nominal flow (I/min) at viscosity 30 cSt
Media Length 2 Length 3
Single unit 130M Connection size
02QE 938721Q 938725Q
Filter length Media G24 G32 R40
05QE 938722Q 938726Q
Length 2 02QE 400 500 500
10QE 938723Q 938727Q
05QE 500 600 600
20QE 938724Q 938728Q
10QE 550 650 700
20QE 600 750 800
Replacement Microglass III elements with nitrile seals Length 3 02QE 550 750 800
Media Length 2 Length 3 05QE 600 800 850
02Q 938733Q 938737Q 10QE 630 900 950
05Q 938734Q 938738Q 20QE 650 950 1000
10Q 938735Q 938739Q
20Q 938736Q 938740Q

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
Highlights Key (Denotes part number availability)
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
123 Item is standard % efficiency, based on the above beta ratio (ßx) Metal free
123 Item is standard green option 50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Ecoglass III
123 Item is semi standard N/A N/A N/A N/A N/A 4.5 02QE*
123 Item is non standard N/A N/A 4.5 5 6 7 05QE
Note: Standard items are in stock, semi standard items are available N/A 6 8.5 9 10 12 10QE
within four weeks 6 11 17 18 20 22 20QE

94 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 11
 High Pressure Filters

15P/30P Series
MAX 200 I/min - 207 bar

High pressure filters

95
 High Pressure Filters

15P/30P Series
Features & Benefits

Features Advantages Benefits

Compact aluminium housing Light weight but still robust design Reliable and continuous operation both
in mobile and industrial applications
Two head sizes and two bowl Optimised sizing Efficient filtration
lengths
Right filter for each application
Large ports and wide flow paths Low differential pressure across housing Higher flow rates possible
and element
Less lost energy
Microglass III replacement elements Multi-layered design produced high capacity Great performance value
and efficiency
Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps Reduces downtime, maximises
performance consistent element life
Visual, electrical and electronic Check element condition at a glance Optimise element life, prevent bypassing
indicators available
Right style for the application Matches your system electrical
connections

Typical Applications

Saw mills
Aircraft ground support equipment
Asphalt pavers
Hydraulic fan drives
Power steering circuits
Domestic refuse vehicles
Cement trucks
Servo control protection
Logging equipment

The Parker Filtration 15P/30P Series That’s where Parker pressure filters come into
High Pressure Filters. play. They filter out ingressed contamination before
it jams a valve or scores a cylinder. They block
These application examples have one thing in
pump generated debris before it gets to servo
common...the need for clean hydraulic fluid.
or proportional valves. Parker pressure filters
Modern high pressure hydraulic systems are are a key ingredient in meeting today’s system
demanding. Better controls and long component demands.
life are expected. To deliver the high standards of
Put your hydraulic systems in the care of Parker
performance, hydraulic components are built with
Filtration. We are committed to designing and
tighter tolerances which increases their sensitivity
building the best filters available to industry.
to contamination.

96 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 12
Specification

Pressure ratings: Flow fatigue characteristics:

Maximum allowable operating pressure 207 bar. Filter media is supported so that the optimal fatigue life is achieved
Filter housing pressure pulse fatigue tested: 138 bar. (ISO 3724).
Connections: Microglass III:
Inlet and outlet connections are threaded. Supported with epoxy coated metal wire mesh, end cap material
Connection style Model reinforced composite and metal inner core. Collapse rating 24 bar
15P 30P (ISO 2941).
BSPF(G) 3/4” 1” High collapse elements:
ISO 6149 M27 M33 High collapse elements available. For details please contact
Filter housing: Parker Filtration.
Head material extruded aluminium (anodised 6061-T6). Indicator options:
Bowl material impacted aluminium (anodised 6061-T6). Indicating differential pressure: 2.5 ± 0.3 bar.
Seal material: - visual M3.
Nitrile or Fluoroelastomer. - electrical T1.
Operating temperature range: - electronic F1(PNP).
-20°C to +100°C. - electronic F2(NPN).
For indicator details see catalogue section 6.
Bypass valve:
Opening pressure 3.5 bar. Weights (kg):
Model Length 1 Length 2
Filter element: 15P 1.6 2.1
Degree of filtration: 30P 2.9 3.9
Determined by multipass-test according to ISO 16889.
Fluid compatibility:
Suitable for use with mineral and vegetable oils, and some
synthetic oils. For other fluids, please consult Parker Filtration.

Installation Details

15P Series
101.6 Torque 74-95 Nm
23.0 4.00 (55-70 Ft lbs)
.91

46.0
1.81

79.4
Dia.
31.3
50.5
1.99
79.4–.13
3.125–.005
21.8
6.22 6.8–.13 49.0
.86
.25 .266–.005 1.93

155.3
25.4 6.11
62.5
1.000 2.46 15P-1
Torque 40-48 Nm
250.4 173.5-2.3
9.86 6.83-0.9
15P-2 15P-1
268.7–.2.3
10.58–.09
50.8
15P-2 2.00 Optional 5/16 SAE-5
Minimum drain port
cartridge removal torque 20-27 Nm
clearance (15-20 ft lbs)

Bottom View
64.3
2.53

23.9
.94
High pressure filters
97
 High Pressure Filters

15P/30P Series
Installation Details (cont.)

30P Series Torque 74-95 Nm (55-70 Ft lbs)

90.1 66.7
3.55 2.63
3.0
.12
mm
(inches)

51.4
2.02

Side view 210.0 229.6

24.4
8.27 9.04
.96
30P-1 30P-1

75.2 Torque 88-95 Nm

2.96 (65-70 Ft lbs)
319.3
12.57
101.6
30P-2 4.00 Optional str thd drain port
Minimum
cartridge 5/16 SAE-5 (11/2-20 UNF-2B)
removal Torque 20-27 Nm (15-20 Ft lbs)
338.8 clearance
13.34 69.9
104.8 dia Bottom view 2.750
30P-2 92.1 dia
4.13 34.9
3.63
1.375 10.3 dia thru 2 total
.406
52.3
2.06
28.8
Hex
1.12

19.1 31.8
101.6 .75 1.25
4.000
Port to port Optional mounting bracket (925563)

11

Index Description 15P 30P

10 1 Head
2 Bypass assembly
3 Element See chart in product configurator
4 Bowl O-ring – buna N92138 N92151
Bowl O-ring – fluoroelastomer V92138 V92151
5 Bowl
1
6 Drain plug – c/w buna seal
Drain plug – c/w
Fluoroelastomer seal
3
7 Nameplate
10 Blank indicator kit
4 11 Indicators
M3 – Visual auto reset indicator FMUM3KVAU14M
5 T1 – Electrical indicator FMUT1KVAU14M
7
F1 – Electronic indicator
PNP with 4 LED FMUF1KVAU14M
1 F2 – Electronic indicator
6 NPN with 4 LED FMUF2KVAU14M

4
6
5

98 Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK. Section 12
Pressure Drop Curves

The recommended level of the initial pressure drop is max. 1.2 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
!p = (!p30 x viscosity of medium used) / 30 cSt.

15P Empty Housing 30P Empty Housing

Flow (US GPM) Flow (US GPM)

0 5 10 15 20 25 0 10 20 30 40 50 60
25 25

1.5 20 1.5 20
Δp (PSID)

Δp (PSID)
15 15
Δp (bar)

Δp (bar)
1.0 1.0
15P-2 10 30P-2 10
15P-1 30P-1
0.5 0.5
5 5

0.0 0 0.0 0
0 20 40 60 80 0 50 100 150 200
Flow (l/min) Flow (l/min)

15P-1 Elements 30P-1 Elements

Flow (US GPM) Flow (US GPM)

0 5 10 15 20 25 0 13 26 39 53 66 79
25 25

1.5 1.5
20 20
05Q 02Q
05Q
10Q

Δp (PSID)
Δp (PSID)

15 15
Δp (bar)

Δp (bar)

1.0 1.0
02Q 10Q
10 10
20Q 20Q
0.5 0.5
5 5

0.0 0 0.0 0
0 20 40 60 80 100 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

15P-2 Elements 30P-2 Elements

Flow (US GPM) Flow (US GPM)

0 5 10 15 20 25 0 13 26 39 53 66 79
25 25

1.5 1.5
20 20
02Q 02Q
Δp (PSID)
Δp (PSID)

15 05Q 15
Δp (bar)

Δp (bar)

1.0 1.0
10Q
05Q 10 10
0.5 0.5
10Q 5 20Q 5
20Q

0.0 0 0.0 0
0 20 40 60 80 100 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

High pressure filters

99
 High Pressure Filters

15P/30P Series
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement
(l/min) number length rating (µ) settings elements
15P110QBM3KG121 15P-1-10Q-M2-50-B2B2-1 45 15P Length 1 10 Nitrile Visual 3.5 bar G3/4" 939102Q
15P110QBT1KG121 15P-1-10Q-TW3-50-B2B2-1 45 15P Length 1 10 Nitrile Electrical 3.5 bar G3/4" 939102Q
15P210QBM3KG121 15P-2-10Q-M2-50-B2B2-1 70 15P Length 2 10 Nitrile Visual 3.5 bar G3/4" 939106Q
15P210QBT1KG121 15P-2-10Q-TW3-50-B2B2-1 70 15P Length 2 10 Nitrile Electrical 3.5 bar G3/4" 939106Q
30P110QBM3KG161 30P-1-10Q-M2-50-C2C2-1 120 30P Length 1 10 Nitrile Visual 3.5 bar G1" 939110Q
30P110QBT1KG161 30P-1-10Q-TW3-50-C2C2-1 120 30P Length 1 10 Nitrile Electrical 3.5 bar G1" 939110Q
30P210QBM3KG161 30P-2-10Q-M2-50-C2C2-1 170 30P Length 2 10 Nitrile Visual 3.5 bar G1" 939114Q
30P210QBT1KG161 30P-2-10Q-TW3-50-C2C2-1 170 30P Length 2 10 Nitrile Electrical 3.5 bar G1" 939114Q
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
15P 1 10Q B M3 K G12 1

Box 1 Highlights Key (Denotes part number availability)

Code 123 Item is standard
Model Code 123 Item is standard green option
High pressure filter, T-port 15P 123 Item is semi standard
High pressure filter, T-port 30P 123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks
Box 2 Box 3
Filter type Degree of filtration
Length Code Element media Glass fibre
Length 1 1 Media code
Length 2 2 Microglass III element 02Q 05Q 10Q 20Q

Box 4 Box 5 Box 6

Seal type Indicator Bypass and indicator settings
Seal material Code Code Bypass valve Indicator Code
Nitrile B Plugged with steel plug P 3.5 bar 2.5 bar K
Fluoroelastomer V Visual indicator M3 When filter includes a bypass valve but not an indicator,
Electrical indicator T1 code denotes bypass setting.
No indicator port N
Electronic 4 LED, PNP, N.O. F1
Electronic 4 LED, NPN, N.O. F2
Electronic 4 LED, PNP, N.C. F3
Electronic 4 LED, NPN, N.C. F4

Box 7 Box 8
Filter connection Options Replacement elements with nitrile seals
Connections Code Options Code Media 15P-1 15P-2 30P-1 30P-2
15P: Thread G3/4 G12 Standard 1 02Q 939100Q 939104Q 939108Q 939112Q
Thread M27, ISO 6149 M27 Drain port on bowl 4 05Q 939101Q 939105Q 939109Q 939113Q
30P: Thread G 1 G16 10Q 939102Q 939106Q 939110Q 939114Q
Thread M33, ISO 6149 M33 20Q 939103Q 939107Q 939111Q 939115Q

Nominal flow (I/min) at viscosity 30 cSt

Filter model 02Q 05Q 10Q 20Q
15P-1 25 30 45 70
15P-2 40 60 70 90
30P-1 70 90 120 170
30P-2 120 150 170 200

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
% efficiency, based on the above beta ratio (ßx) Disposable
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III
N/A N/A N/A N/A N/A 4.5 02Q
N/A N/A 4.5 5 6 7 05Q
N/A 6 8.5 9 10 12 10Q
6 11 17 18 20 22 20Q

100 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 12
 High Pressure Filters

100P Series
MAX 1000 I/min - 414 bar

High pressure filters

101
 High Pressure Filters

100P Series
Features & Benefits

Features Advantages Benefits

High 414 bar pressure rating Strong and robust housing for heavy duty Reliable and continuous operation for
applications open and closed loop applications
Flow rates up to 1000 l/min Pressure filtration possible for high flow rates Excellent protection of high
performance machinery
Optional reverse flow valve Allows reverse flow and prevents back wash Ideal for applications where back flow
of element is expected
Bottom access bowl Only bottom of the bowl must be opened for Easy service
element change
Microglass III replacement elements Multi-layered design produced high capacity Great performance value
and efficiency
Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps Reduces downtime, maximises
performance consistent element life
Visual and electrical indicators Check element condition at a glance Optimises element life, prevents
available bypassing
Right style for the application Matches your system electrical
connections

Typical Applications

Drilling rigs
Power packs
Oil/gas industry
Flight simulators
Test rigs

The Parker Filtration Model 100P

High Pressure Filters.
The 100P Series is designed to meet the growing
demand for high-pressure filters with a flow rate capacity
of up to 1000 l/min at 414 bar working pressure.
For systems where reverse flow can be expected, an
optional integrated reverse flow valve avoids back wash
of contamination. When changing the element, only
the end cap of the bowl has to be removed. The filter
is ideal for applications where space is at a premium.
The filter media used in the elements is high quality
Microglass III glass fibre.

102 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 13
Specification

Pressure ratings: Filter element:

Maximum allowable operating pressure 414 bar. Degree of filtration:
Filter housing pressure pulse fatigue tested: 3*106 pulses 0 - 276 bar. Determined by Multipass-test according to ISO 16889.
Connections: Flow fatigue characteristics:
Inlet and outlet connections are threaded internally or flange faced. Filter media is supported so that the optimal fatigue life
Threads G11/2", G2" (ISO 228/1), SAE 24, SAE 32. is achieved (ISO 3724).
or flanges 11/2" SAE 6000, 2" SAE 6000, 11/2" SAE 6000-M, Microglass III:
2" SAE 6000-M. Supported with epoxy coated metal wire mesh, end cap
*6000-M is a SAE style with appropriate metric fixing threads. material reinforced composite and metal inner core.
Filter housing: Collapse rating 20 bar (ISO 2941).
Head material cast iron (GSI). High collapse elements:
Bowl material extruded steel, max torque 200 Nm. High collapse elements available. For details please contact
Seal material: Parker Filtration.
Nitrile or Fluoroelastomer. Indicator options:
Operating temperature range: Indicating differential pressure: 5.0 bar.
- 20°C to +100°C. - visual indicator.
Bypass valve: - electrical indicator.
Opening pressure 7.0 bar. Weights (kg):
Options: 100P-1: 37 kg.
Reverse flow valve, which directs back flow from port to port. 100P-2: 47 kg.
Fluid compatibility:
Suitable for use with mineral and vegetable oils, and some
synthetic oils. For other fluids, please consult Parker Filtration.

Installation Details
55A/F 100
9 Mounting Clamp Item 16
35

6
188
Steel (Zinc plated)
88

2.5

EPDM
3

8
M12x75(2x)
(81.21.022.20)
105

5
12
Ø

7
70

1
100
138

13
107.5

10
30
8
235

13

Ø169
12 Type H model 1000
1 Filter head
L1=563
L2=813

3/3A 2 Filter element

Ø125 3 Bowl seal
11
3A Bowl back-up ring
4 Housing
4 5 Cover
Ø145 6 Indicator seal
7 Bypass set
3/3A 8 Visual indicator
15

14 9 Electrical indicator
SAE 6
10 Bypass seal
46 A/F 2 11 Reverse flow set
12 Adaptor
Minimum element

13 Adaptor/reverse flow seal

clearance
330/580

Ø145 5
14 Cover seal
15 15 Drain plug
16 Mounting clamp

High pressure filters

103
 High Pressure Filters

100P Series
Additional Information

Filter with Normal Flow Condition

Reverse Flow Valve
Valve housing

Valve housing
Sleeve
Central stem

Circuit symbol

Reverse Flow Condition

Pressure Drop Curves

The recommended level of the initial pressure drop is max. 2.3 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop can be estimated as follows:
The total p = housing ph + (element pe x working viscosity/30).

100P-1 Empty Housing (G11/2”, SAE 24, SAE 11/2”) 100P-2 Empty Housing (G2”, SAE 32, SAE 2”)
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 0 26 53 79 106 132 159 185 211 264
238
2 29 2 29
1.8 26.1 1.8 26.1
1.6 23.2 1.6 23.2
RFV RFV
1.4 20.3 1.4 20.3
Δp (PSID)

Δp (PSID)

1.2 17.4 1.2 17.4

Δp (bar)

Δp (bar)

1 Normal 14.5 1 14.5

housing
0.8 11.6 0.8 11.6
Normal
0.6 8.7 0.6 8.7
housing
0.4 5.8 0.4 5.8
0.2 2.9 0.2 2.9
0 0 0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800 900 1000
Flow (l/min) Flow (l/min)

100P-1 Elements 100P-2 Elements

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 211 0 26 53 79 106 132 159 185 211 264
238
2 29 2 29
1.8 26.1 1.8 26.1
02Q
1.6 23.2 1.6 23.2
1.4
02Q 1.4
20.3 20.3
05Q
Δp (PSID)

Δp (PSID)

1.2 17.4 1.2 17.4

Δp (bar)

Δp (bar)

1
05Q 1
14.5 14.5
10Q 10Q
0.8 11.6 0.8 11.6
0.6 8.7 0.6 8.7
20Q
0.4 5.8 0.4 5.8
20Q
0.2 2.9 0.2 2.9
0 0 0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800 900 1000
Flow (l/min) Flow (l/min)

104 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 13
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement Supersedes
(l/min) number length rating (µ) settings elements
100P105QBM4MF241 1074A.2HN70.FZ1210 600 100P Length 1 5 Nitrile Visual 7.0 bar SAE flange 11/2" 6000 939061Q 1070Z121A
100P110QBM4MF241 1074A.2HN70.FZ1220 700 100P Length 1 10 Nitrile Visual 7.0 bar SAE flange 11/2" 6000 939062Q 1070Z122A
100P120QBM4MF241 1074A.2HN70.FZ1230 800 100P Length 1 20 Nitrile Visual 7.0 bar SAE flange 11/2" 6000 939063Q 1070Z123A
100P205QBM4MF321 1074A.2HN70.TZ2210 840 100P Length 2 5 Nitrile Visual 7.0 bar SAE flange 2" 6000 939065Q 1070Z221A
100P210QBM4MF321 1074A.2HN70.TZ2220 920 100P Length 2 10 Nitrile Visual 7.0 bar SAE flange 2" 6000 939066Q 1070Z222A
100P220QBM4MF321 1074A.2HN70.TZ2230 1000 100P Length 2 20 Nitrile Visual 7.0 bar SAE flange 2" 6000 939067Q 1070Z223A
Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above.

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
100P 2 10Q B M4 M F32 1

Box 1
Code
Model Code
Large HP filter, L-port 100P

Box 2 Box 3
Filter type Degree of filtration
Length Code Element media Glass fibre
Length 1 1 Media code
Length 2 2 Microglass III element 02Q 05Q 10Q 20Q

Box 4 Box 5 Box 6

Seal type Indicator Bypass and indicator settings
Seal material Code Code Bypass valve Indicator Code
Nitrile B Indicator port plugged P 7.0 bar 5.0 bar M
Fluoroelastomer V Visual indicator M4 When filter includes a bypass valve but not an indicator,
Electrical indicator T2 code denotes bypass setting.
Electrical indicator with red lamp 28 Vdc, N.O. T3
Electrical indicator with red lamp 110 VAC, N.O. T4
Electrical indicator with red lamp 250 VAC, N.O. T5

Box 7 Box 8
Filter connection Options Replacement elements with nitrile seals
Connections Code Options Code Media Length 1 Length 2
Thread G 11/2 G24 Standard 1 02Q 939060Q 939064Q
Thread G 2 G32 Reverse flow valve 3 05Q 939061Q 939065Q
Thread SAE 24 S24 10Q 939062Q 939066Q
Thread SAE 32 S32 20Q 939063Q 939067Q
SAE flange 11/2" 6000 F24
SAE flange 11/2" 6000-M H24
SAE flange 2" 6000 F32
Nominal flow (I/min) at viscosity 30 cSt
Filter port size 02Q 05Q 10Q 20Q
SAE flange 2" 6000-M H32
100P-1, 11/2" 540 600 700 800
100P-2, 2" 700 840 920 1000

Degree of filtration
Highlights Key (Denotes part number availability) Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
123 Item is standard
% efficiency, based on the above beta ratio (ßx) Disposable
123 Item is standard green option
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III
123 Item is semi standard
N/A N/A N/A N/A N/A 4.5 02Q
123 Item is non standard
N/A N/A 4.5 5 6 7 05Q
Note: Standard items are in stock, semi standard items are available N/A 6 8.5 9 10 12 10Q
within four weeks 6 11 17 18 20 22 20Q

Seal kit (nitrile) order code: 8069000070

Mounting clamp order code: 84.47.265.01

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
High pressure filters
105
 High Pressure Filters

18/28/38P Series
MAX 700 I/min - 414 bar

High pressure filters

107
 High Pressure Filters

18/28/38P Series
Features & Benefits

Features Advantages Benefits

Fatigue tested to full pressure rating Strong and robust housing for heavy duty Reliable and continuous operation both
applications in mobile and industrial applications
Several head sizes Optimised sizing Efficient filtration
Covers wide flow range
Several connection options Easy mounting Global design, global acceptance
Right filter for each application
Microglass III replacement elements Multi-layered design produced high capacity and Great performance value
efficiency Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps
Reduces downtime, maximises
performance consistent
element life
Visual, electrical and electronic Check element condition at a glance Optimises element life, prevents
indicators available bypassing
Right style for the application Matches your system electrical
connections

Typical Applications

Injection moulding
Die casting
Servo controls
Machine tools
Mobile equipment

The Parker Filtration 18/28/38P Series

High Pressure Filters
Parker Filtration engineered the 18/28/38P series of high pressure filters
to satisfy demanding applications in the mobile and industrial markets
throughout the world. With metric mounting and optional ISO 6149
ports, this new series is truly a global design.
Installed downstream of the pump, this new series with their wide range
of high capacity Microglass III elements, offer excellent protection to
system components.
Standard filters come complete with industry proven spool type bypass
valve. For more critical applications such as servo or proportional
controls, a no bypass high strength element combination ensures
maximum protection.
The modular low hysteresis differential pressure indicator fitted to this
series is unrivaled in its performance. Tests prove its accuracy and
foolproof design to be a major advance in indicator technology.

108 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 14
Specification

Pressure ratings: Filter element:

Maximum allowable operating pressure 414 bar. Degree of filtration:
Filter housing pressure pulse fatigue tested: 106 pulses 0 - 414 bar. Determined by multipass-test according to ISO 16889.
Connections: Flow fatigue characteristics:
Inlet and outlet connections are threaded internally or flange faced. Filter media is supported so that the optimal fatigue life is achieved (ISO 3724).
Connection style Model Microglass III:
18P 28P 38P Supported with epoxy coated metal wire mesh, end cap material reinforced
BSPF(G) 3/4” 1” 11/4”, 11/2” composite and metal inner core. Collapse rating 20 bar (ISO 2941).
SAE 12 16 20, 24
ISO 6149 M27 M33 M42, M48 High collapse elements:
Flange SAE 6000 3/4” 1” 11/4” (To be used when no bypass function in filter housing).
Flange SAE 6000-M* 3/4” 1” 11/4” Microglass III media supported with epoxy coated metal wire mesh on
*6000-M is a SAE style with appropriate metric fixing threads. upstream and stainless steel on downstream, end cap material steel.
Strong metal inner core. Collapse rating 210 bar (ISO 2941).
Filter housing:
Head material cast iron (GSI). Indicator options:
Bowl material steel. Indicating differential pressure: 2.5 ± 0.3 bar or 5.0 ± 0.5 bar.
- visual M3.
Seal material: - electrical T1.
Nitrile or Fluoroelastomer. - electronic F1(PNP).
Operating temperature range: - electronic F2(NPN).
-20°C to +100°C. For indicator details see catalogue section 6.
Bypass valve & indicator settings: Weights (kg):
Table below gives bypass valve and corresponding indicator setting. Model Length 1 Length 2
Bypass Indicator 18P 4.2 5.7
3.5 bar 2.5 bar 28P 6.7 9.2
7.0 bar 5.0 bar 38P 15.8 20.3
Fluid compatibility:
Suitable for use with mineral and vegetable oils, and some synthetic oils.
For other fluids, please consult Parker Filtration.

Model
A B C D E F G H J K L M N P
(A/F)
198 M8 x 1.25
18P-1 (7.79) 32 26 75 24 98 40 20 80 40 55 110 x12
293 (1.26) (1.02) (2.95) (0.94) (3.86) (1.57) (0.79) (3.15) (1.57) (2.16) (4.33) deep
18P-2 (11.53)
228 M10 x 1.5
28P-1 (8.97) 40 29 93 24 100 120 55 27.5 90 45 62 124 x11
337 (1.57) (1.14) (3.66) (0.94) (3.94) (4.72) (2.16) (1.07) (3.54) (1.77) (2.44) (4.88) deep
28P-2 (13.26)
329 M10 x 1.5
38P-1 (12.95) 44 35 128 36 160 50 25 120 60 81 162 x12
448 (1.73) (1.38) (5.04) (1.42) (6.30) (1.97) (0.98) (4.72) (2.36) (3.19) (6.38) deep
38P-2 (17.64)

18P 28P 38P B C

B
C
B C

A Length 1 A Length 1
Torque
Torque 80-95 Nm
A Length 1 A Length 2 A Length 2
Torque 35-40 Nm (60-70 ft/lbs)
22-27Nm (25-30 ft/lbs)
(15-20 ft/lbs)
A Length 2
D
D
D Hex. E
Hex. E
Hex. E Bowl removal
Bowl removal F Bowl removal
F F
G mm
G H G (inches)
H H
J
J J
5

8
0

R3
R3
R3

15° 15° 15°

K K N
N K N
L L L
M M M

4 mounting holes (P) 4 mounting holes (P) 4 mounting holes (P)

High pressure filters

109
 High Pressure Filters

18/28/38P Series
Flange Face Details

ØG

Thread E metric
F SAE

B
A

C
D

Model A B C D E F G
mm (inches)
11.9 23.8 25.4 50.8 19.0
18P (3/4”) M10 x 1.5-6H x 18 Deep 3
/8-16 UNC-2B x 18 deep
(0.47) (0.94) (1.00) (2.0) (0.75)
14 27.8 28.0 57.1 25.4
28P (1”) M12 x 1.75-6H x 20 Deep 7
/16-14 UNC-2B x 20 deep
(0.55) (1.09) (1.10) (2.25) (1.0)
15.7 31.7 33.0 66.7 31.8
38P (11/4”) M14 x 2-6H x 20 Deep 1 2 / -13 UNC-2B x 20 deep
(0.62) (1.25) (1.30) (2.62) (1.25)

110 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 14
Pressure Drop Curves

With 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.
With 7.0 bar bypass the recommended initial pressure drop is max 2.3 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
The total p = housing ph + (element pe x working viscosity/30).

18P-1 Elements 18P-2 Elements

Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 32 37 42 0 5 11 16 21 26 32 37 42
3.5 3.5
3.0 43.5 3.0 43.5
02Q
2.5 2.5
02Q
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)
2.0 29.0 2.0 29.0
05Q
1.5 1.5
10Q 05Q
1.0 14.5 1.0 14.5
20Q 10Q
0.5 0.5
20Q
0.0 0 0.0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Flow (l/min) Flow (l/min)

18P-1 Empty Housing and High Collapse 18P-2 High Collapse Elements
Flow (US GPM) Flow (US GPM)

0 5 11 16 21 26 32 37 42 0 5 11 16 21 26 32 37 42
3.5 3.5

3.0 43.5 3.0 43.5

02Q 05Q 02Q
2.5 2.5
Δp (PSID)

Δp (PSID)
10Q
Δp (bar)

Δp (bar)

2.0 29.0 2.0 29.0

05Q
1.5 1.5
20Q 10Q
1.0 14.5 1.0 14.5
20Q
0.5 0.5
Empty Housing
0.0 0 0.0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Flow (l/min) Flow (l/min)

28P-1 Elements 28P-2 Elements

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79

02Q 43.5 43.5

3.0 3.0

2.5 2.5
05Q
Δp (PSID)

Δp (PSID)

02Q
Δp (bar)

Δp (bar)

2.0 29.0 2.0 29.0

10Q
1.5 1.5
20Q 05Q
14.5
10Q 14.5
1.0 1.0
20Q
0.5 0.5

0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

28P-1 Empty Housing and High Collapse 28P-2 High Collapse Elements
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79

3.0 43.5 3.0 43.5

02QH 05QH 10QH 02QH 05QH
20QH 10QH
2.5 2.5
Δp (PSID)

Δp (PSID)

20QH
Δp (bar)

Δp (bar)

2.0 29.0 2.0 29.0

1.5 1.5

1.0 14.5 1.0 14.5

Empty Housing
0.5 0.5

0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

High pressure filters

111
 High Pressure Filters

18/28/38P Series
Pressure Drop Curves (cont.)

38P-1 Elements 38P-2 Elements

Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185

3.5 3.5
3.0 43.5 3.0 43.5
02Q 05Q
2.5 2.5

Δp (PSID)

Δp (PSID)
02Q
Δp (bar)

Δp (bar)
2.0 29.0 2.0 29.0

1.5 1.5
10Q 05Q
1.0 14.5 1.0 14.5
20Q 10Q
0.5 0.5
20Q
0.0 0 0.0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
Flow (l/min) Flow (l/min)

38P-1 Empty Housing and High Collapse 38P-2 High Collapse Elements
Flow (US GPM) Flow (US GPM)

0 26 53 79 106 132 159 185 0 26 53 79 106 132 159 185

3.5 3.5
05Q 10Q 05Q 10Q
3.0 43.5 3.0 43.5
02Q 02Q
2.5 2.5
20Q 20Q
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

2.0 29.0 2.0 29.0

1.5 1.5

1.0 14.5 1.0 14.5

Empty Housing
0.5 0.5

0.0 0 0.0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
Flow (l/min) Flow (l/min)

Element Service

A. Stop the system’s power unit. Parts List

B. Relieve any system pressure in the filter line. Index Description Part number
C. Drain the filter bowl if drain port option is provided. 1 Head Assembly
D. Rotate the bowl clockwise (left) and remove. 2 Element see table on
3 Bowl next page
E. Remove element by pulling downward with a Indicators
slight twisting motion and discard. 4 M3 – Visual auto reset; 2.5 bar
F. Check bowl o-ring and anti-extrusion ring for M3 – Visual auto reset; 5.0 bar
damage and replace if necessary. 5 T1 – Electrical; 2.5 bar with
DIN 43650 Connector
G. Lubricate element o-ring with system fluid and T1 – Electrical; 5.0 bar with
locate element in filter head. DIN 43650 Connector
H. Install bowl by rotating counter-clockwise (right) F1 – Electronic PNP; 2.5 bar with 4 LED
F2 – Electronic NPN; 2.5 bar with 4 LED
and tighten to specified torque.
F1 – Electronic PNP; 5.0 bar with 4 LED
18P - 22-27 Nm (16-20 ft. lbs.) F2 – Electronic NPN; 5.0 bar with 4 LED
28P - 35-40 Nm (25-30 ft. lbs.) 6 Bowl Seal
7 Bowl Anti-extrusion Ring
38P - 80-95 Nm (60-70 ft. lbs.) Seal Kits
I. Confirm there are no leaks after powering Seal kit 18P (std) – Nitrile S04350
the system. Seal kit 18P (F3) – Fluoroelastomer S04351
Seal kit 28P (std) – Nitrile S04352
Seal kit 28P (F3) – Fluoroelastomer S04353
Seal kit 38P (std) – Nitrile S04354
Seal Kit 38P (F3) – Fluoroelastomer S04355

112 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 14
Element Service (cont.)

Replacement element part numbers

Elements with Nitrile seals
Model 18P-1 18P-2 28P-1 28P-2 38P-1 38P-2
02Q G04242 G04250 G04258 G04266 G04274 G04282
05Q G04243 G04251 G04259 G04267 G04275 G04283
5 4 10Q G04244 G04252 G04260 G04268 G04276 G04284
20Q G04245 G04253 G04261 G04269 G04277 G04285
02QH G04290 G04298 G04306 G04314 G04322 G04330
05QH G04291 G04299 G04307 G04315 G04323 G04331
10QH G04292 G04300 G04308 G04316 G04324 G04332
20QH G04293 G04301 G04309 G04317 G04325 G04333

Elements with Fluoroelastomer seals

Model 18P-1 18P-2 28P-1 28P-2 38P-1 38P-2
02Q G04246 G04254 G04262 G04270 G04278 G04286
05Q G04247 G04255 G04263 G04271 G04279 G04287
1 10Q G04248 G04256 G04264 G04272 G04280 G04288
20Q G04249 G04257 G04265 G04273 G04281 G04289
02QH G04294 G04302 G04310 G04318 G04326 G04334
05QH G04295 G04303 G04311 G04319 G04327 G04335
10QH G04296 G04304 G04312 G04320 G04328 G04336
20QH G04297 G04305 G04313 G04321 G04329 G04337

Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement
(l/min) number length rating (µ) settings elements
18P110QBT1MG121 18P-1-10Q-TW6-98-B2B2-1 80 18P Length 1 10 Nitrile Electrical 7.0 bar G3/4" G04244
18P110QBM3MG121 18P-1-10Q-M2-98-B2B2-1 80 18P Length 1 10 Nitrile Visual 7.0 bar G3/4" G04244
18P120QBT1MG121 18P-1-20Q-TW6-98-B2B2-1 100 18P Length 1 20 Nitrile Electrical 7.0 bar G3/4" G04245
18P120QBM3MG121 18P-1-20Q-M2-98-B2B2-1 100 18P Length 1 20 Nitrile Visual 7.0 bar G3/4" G04245
18P210QBT1MG121 18P-2-10Q-TW6-98-B2B2-1 130 18P Length 2 10 Nitrile Electrical 7.0 bar G3/4" G04252
18P210QBM3MG121 18P-2-10Q-M2-98-B2B2-1 130 18P Length 2 10 Nitrile Visual 7.0 bar G3/4" G04252
18P220QBT1MG121 18P-2-20Q-TW6-98-B2B2-1 150 18P Length 2 20 Nitrile Electrical 7.0 bar G3/4" G04253
18P220QBM3MG121 18P-2-20Q-M2-98-B2B2-1 150 18P Length 2 20 Nitrile Visual 7.0 bar G3/4" G04253
28P110QBT1MG161 28P-1-10Q-TW6-98-C2C2-1 120 28P Length 1 10 Nitrile Electrical 7.0 bar G1" G04260
28P110QBM3MG161 28P-1-10Q-M2-98-C2C2-1 120 28P Length 1 10 Nitrile Visual 7.0 bar G1" G04260
28P120QBT1MG161 28P-1-20Q-TW6-98-C2C2-1 150 28P Length 1 20 Nitrile Electrical 7.0 bar G1" G04261
28P120QBM3MG161 28P-1-20Q-M2-98-C2C2-1 150 28P Length 1 20 Nitrile Visual 7.0 bar G1" G04261
28P210QBT1MG161 28P-2-10Q-TW6-98-C2C2-1 250 28P Length 2 10 Nitrile Electrical 7.0 bar G1" G04268
28P210QBM3MG161 28P-2-10Q-M2-98-C2C2-1 250 28P Length 2 10 Nitrile Visual 7.0 bar G1" G04268
38P110QBT1MG201 38P-1-10Q-TW6-98-D2D2-1 340 38P Length 1 10 Nitrile Electrical 7.0 bar G11/4" G04276
38P110QBM3MG201 38P-1-10Q-M2-98-D2D2-1 340 38P Length 1 10 Nitrile Visual 7.0 bar G11/4" G04276
38P120QBT1MG201 38P-1-20Q-TW6-98-D2D2-1 420 38P Length 1 20 Nitrile Electrical 7.0 bar G11/4" G04277
38P120QBM3MG201 38P-1-20Q-M2-98-D2D2-1 420 38P Length 1 20 Nitrile Visual 7.0 bar G11/4" G04277
38P210QBT1MG201 38P-2-10Q-TW6-98-D2D2-1 560 38P Length 2 10 Nitrile Electrical 7.0 bar G11/4" G04284
38P210QBM3MG201 38P-2-10Q-M2-98-D2D2-1 560 38P Length 2 10 Nitrile Visual 7.0 bar G11/4" G04284
38P220QBT1MG201 38P-2-20Q-TW6-98-D2D2-1 700 38P Length 2 20 Nitrile Electrical 7.0 bar G11/4" G04285
38P220QBM3MG201 38P-2-20Q-M2-98-D2D2-1 700 38P Length 2 20 Nitrile Visual 7.0 bar G11/4" G04285
Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.

High pressure filters

113
 High Pressure Filters

18/28/38P Series
Ordering Information (cont.)

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
38P 1 10Q B M3 M G20 1

Box 1 Highlights Key (Denotes part number availability)

Code 123 Item is standard
Model Code 123 Item is standard green option
Small size high pressure filter, T-port 18P 123 Item is semi standard
Medium size high pressure filter, T-port 28P 123 Item is non standard
Large size high pressure filter, T-port 38P Note: Standard items are in stock, semi standard items are available within four weeks

Box 2 Box 3
Filter type Degree of filtration
Length Code Element media Glass fibre
Length 1 1 Media code
Length 2 2 Microglass III element 02Q 05Q 10Q 20Q
High collapse element 02QH 05QH 10QH 20QH

Box 4 Box 5 Box 6

Seal type Indicator Bypass and indicator settings
Seal material Code Code Bypass valve Indicator Code
Nitrile B No indicator port N 3.5 bar 2.5 bar K
Fluoroelastomer V Visual indicator M3 7.0 bar 5.0 bar M
Electrical indicator T1 No bypass 5.0 bar M + Box 8: code 2
Plugged with steel plug P No bypass No indicator X + Box 8: code 2
Electronic 4 LED, PNP, N.O. F1 When filter includes a bypass valve but not an indicator,
Electronic 4 LED, NPN, N.O. F2 code denotes bypass setting.
Electronic 4 LED, PNP, N.C. F3
Electronic 4 LED, NPN, N.C. F4

Box 7 Box 8
Filter connection Options
Ports Code Options Code
18P: Thread G 3/4 G12 Standard 1
Thread SAE 12 S12 No bypass 2
Thread M27, ISO 6149 M27
SAE flange 3/4" 6000-M H12
SAE flange 3/4" 6000 F12
28P: Thread G 1 G16
Thread SAE 16 S16
Thread M33, ISO 6149 M33
SAE flange 1" 6000-M H16
SAE flange 1" 6000 F16
38P: Thread G 1 1/4 G20 Nominal flow (I/min) at viscosity 30 cSt
Thread G 1 1/2 G24 Filter model 02Q 05Q 10Q 20Q
Thread SAE 20 S20 18P-1 35 60 80 100
Thread SAE 24 S24 18P-2 70 110 130 150
Thread M42, ISO 6149 M42 28P-1 80 100 120 150
Thread M48, ISO 6149 M48 28P-2 140 200 250 300
SAE flange 1 1/4" 6000-M H20 38P-1 140 220 340 420
SAE flange 1 1/4" 6000 F20 38P-2 320 440 560 700

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
% efficiency, based on the above beta ratio (ßx) Disposable High collapse
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III element
N/A N/A N/A N/A N/A 4.5 02Q 02QH
N/A N/A 4.5 5 6 7 05Q 05QH
N/A 6 8.5 9 10 12 10Q 10QH
6 11 17 18 20 22 20Q 20QH

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

114 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 14
 High Pressure Filters

70/70 Eco Series

MAX 450 I/min - 420 bar

NG
RI
TU
FEA

High pressure filters

115
 High Pressure Filters

70/70 Eco Series

Features & Benefits

Features Advantages Benefits

Fatigue tested to full pressure rating Strong and robust housing for heavy duty Reliable and continuous operation both
applications in mobile and industrial applications
Several head options and Easy mounting Reduced space and piping
connection sizes Right filter for each application
Several bowl lengths Optimised sizing Efficient filtration
Microglass III replacement elements Multi-layered design produced high capacity and Great performance value
efficiency Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps
Reduces downtime, maximises
performance consistent
element life
Coreless Ecoglass III replacement No metal content in element Environmentally friendly disposal by
elements Reduced overall weight of 50% incineration
Easy compaction of used elements Lower element replacement costs
Eco adaptors available Lower disposal costs
Retrofit coreless design to housings
already installed
Visual, electrical and electronic Check element condition at a glance Optimise element life, prevent bypassing
indicators available
Right style for the application Matches your system electrical
connections

Typical Applications

Forestry equipment
Industrial power units
Pulp and paper
Port handling equipment
Mining and quarrying
equipment

The Parker Filtration 70/70 Eco Series

High Pressure Filters.
High quality 420 bar in-line pressure filters designed to
offer high levels of protection at flows up to 450 l/min.
Dirt sensitive systems can be protected with
confidence using the 70 Series high pressure filters.
The 70 Series also available with environmentally
friendly Ecoglass III elements.

116 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 15
Specification

Pressure ratings: Ecoglass III:

Maximum allowable operating pressure 420 bar. Supported with plastic net, end cap material reinforced composite.
Filter housing pressure pulse fatigue tested: 106 pulses 0 - 414 bar. No metal parts.
Connections: Collapse rating 10 bar (ISO 2941).
Threads G1, G11/4, G11/2 (ISO 228/1). Filter element can only be used together with reusable
or flanges 11/4" SAE 3000-M, 11/2" SAE 3000-M, 11/4" SAE 6000-M, FEA Eco-adapter.
11/2" SAE 6000-M. Note: Ecoglass III contributes to ISO 14001 quality.
Filter housing: High collapse elements:
Head material cast iron (GSI). (To be used when no bypass function in filter housing).
Bowl material steel. Max torque 40 Nm. Microglass III media supported with epoxy coated metal wire mesh
on upstream and stainless steel on downstream, end cap material
Seal material: steel. Strong metal inner core. Collapse rating 210 bar (ISO 2941).
Nitrile or Fluoroelastomer.
Indicator options:
Operating temperature range: Indicating differential pressure: 2.5 ± 0.3 bar or 7.0 ± 0.5 bar.
- 20°C to +100°C. 2.5 bar indicators to be used with 3.5 bar bypass valve and
Bypass valve: 7.0 bar indicators with no bypass function.
Opening pressure 3.5 bar. - visual M3.
Filter element: - electrical T1.
Degree of filtration: - electronic F1(PNP).
Determined by Multipass-test according to ISO 16889. - electronic F2(NPN).
For indicator details see catalogue section 6.
Flow fatigue characteristics:
Filter media is supported so that the optimal fatigue life is achieved Fluid compatibility:
(ISO 3724). Suitable for use with mineral and vegetable oils, and some
synthetic oils. For other fluids, please consult Parker Filtration.
Microglass III:
Supported with epoxy coated metal wire mesh, end cap material
reinforced composite and metal inner core.
Collapse rating 20 bar (ISO 2941).

High pressure filters

117
 High Pressure Filters

70/70 Eco Series

Specification
70B 70T
70L
p indicator 70 80 75
(2.75) (3.15) (2.95)
Vent port D
32 Out
Out In

D
(1.25)

In

D
70

72

140
Option
plug G1/4 Option
plug G1/4
(2.75)
70

135
Option (5.31)
62
Plug M12x1.5
43 (2.44)
(1.69)
129
(5.08)
Internal dia. 31/external dia. 41 8
(0.31)
(5.60)

O-ring size 220

142

134 4 mounting holes 21 dia.

(5.27)
Outlet
95
(3.74) 130
B (5.11)
(0.86)
(1.10)

No. SAE-flange version

Optional indicator port
22
28

52 58 108
(2.04) (2.28) (4.25)
Ø103
(4.05)
190
(7.48)
Inlet

41 HEX
B 41 HEX
60 60 Max torque 40Nm
(2.36) (2.36)

M10 depth 10
Option M10 depth 20 (0.78)
plug M12x1.5 Housing for SAE flange
mounting doesn’t have
144 (5.67)

these holes
100 (3.94)

60 41 HEX
(2.36) mm
(2.04)

(1.61) 155 43
52

(inches) (6.10) (1.69)

56
Weights (kg) (2.20)
137
Type 70T 70L 70B (5.39) 89
(3.50)
Length 1 14 10.5 11.5
Length 2 16.5 13 14
Length 3 19 15.5 16.5
Length 4 22 18.5 19.5

Type A B B B Max working Port

70T 70B 70L pressure D
Length 1 116 (4.57) 249 (9.80) 295 (11.61) 235 (9.25) G1, G11/4 or G11/2
420 bar Flange 11/2 SAE 3000-M
Length 2 208 (8.19) 342 (13.46) 390 (15.35) 330 (13.00)
Flange 11/4 SAE 3000-M
Length 3 329 (12.95) 462 (18.19) 510 (20.08) 450 (17.72) Flange 11/2 SAE 6000-M
Length 4 428 (16.85) 562 (22.12) 610 (24.01) 550 (21.65) 350 bar Flange 11/4 SAE 6000-M

118 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 15
Pressure Drop Curves

With 3.5 bar bypass the recommended initial pressure drop is max 1.2 bar.
If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
The total p = housing ph + (element pe x working viscosity/30).

70 Series Empty Housing

Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132

1.4 20.3
A: 70T with G16 connections
1.2 17.4 B: 70T with G20 connections
B C
1 14.5 70L with G16 connections
D
Δp (PSID)
A C: 70L with G20 connections
Δp (bar)

0.8 11.6

0.6 8.7 70B

E D: 70T with G24 connections
0.4 5.8
E: 70L with G24 connections
0.2 2.9

0 0
0 50 100 150 200 250 300 350 400 450 500
Flow (l/min)

70-1 Elements with Microglass III 70-2 Elements with Microglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
02Q
1.2 17.4 1.2 17.4
05Q 10Q 20Q 05Q
1 14.5 1
02Q
14.5
Δp (PSID)

10Q

Δp (PSID)
Δp (bar)

Δp (bar)

0.8 11.6 0.8 11.6

20Q
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

70-3 Elements with Microglass III 70-4 Elements with Microglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3

1.2 1.2
02Q 17.4
17.4
02Q 05Q
1 14.5 1 14.5
Δp (PSID)

10Q 05Q
Δp (PSID)

Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

10Q
0.6 8.7 0.6 8.7
20Q 20Q
0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

High pressure filters

119
 High Pressure Filters

70/70 Eco Series

Pressure Drop Curves (cont.)

70-1 Elements with Ecoglass III 70-2 Elements with Ecoglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
05QE
1.2 17.4 1.2 17.4
20QE 05QE
02QE 10QE 02QE 10QE
1 14.5 1 14.5

Δp (PSID)
Δp (PSID)

Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

20QE
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

70-3 Elements with Ecoglass III 70-4 Elements with Ecoglass III
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 119 132 0 13 26 39 53 66 79 92 106 119 132

1.4 20.3 1.4 20.3
02QE
1.2 17.4 1.2 17.4
02QE
1 14.5 1 14.5

Δp (PSID)
Δp (PSID)

05QE 05QE
Δp (bar)
Δp (bar)

0.8 11.6 0.8 11.6

10QE 10QE
0.6 8.7 0.6 8.7

0.4 5.8 0.4 5.8

20QE
20QE
0.2 2.9 0.2 2.9

0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min) Flow (l/min)

120 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 15
Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement Supersedes
(l/min) number length rating (µ) settings elements
70L110QBPKG161 FF7005.Q010.BS35.GL16 150 70L 1 10 Nitrile Plugged 3.5 bar G1" 938773Q FC7005.Q010.BK
70L120QBPKG161 FF7005.Q020.BS35.GL16 230 70L 1 20 Nitrile Plugged 3.5 bar G1" 938774Q FC7005.Q020.BK
70L210QBPKG201 FF7006.Q010.BS35.GL20 280 70L 2 10 Nitrile Plugged 3.5 bar G11/4" 938777Q FC7006.Q010.BK
70L220QBPKG201 FF7006.Q020.BS35.GL20 300 70L 2 20 Nitrile Plugged 3.5 bar G11/4" 938778Q FC7006.Q020.BK
70L310QBPKG241 FF7007.Q010.BS35.GL24 400 70L 3 10 Nitrile Plugged 3.5 bar G11/2" 938781Q FC7007.Q010.BK
70L320QBPKG241 FF7007.Q020.BS35.GL24 430 70L 3 20 Nitrile Plugged 3.5 bar G11/2" 938782Q FC7007.Q020.BK
70L410QBPKG241 FF7008.Q010.BS35.GL24 430 70L 4 10 Nitrile Plugged 3.5 bar G11/2" 938785Q FC7008.Q010.BK
70L420QBPKG241 FF7008.Q020.BS35.GL24 450 70L 4 20 Nitrile Plugged 3.5 bar G11/2" 938786Q FC7008.Q020.BK
70L110QEBPKG161 FF7005.QE10.BS35.GL16 150 70L 1 10 Nitrile Plugged 3.5 bar G1" 938789Q FC7005.QE10.BK
70L120QEBPKG161 FF7005.QE20.BS35.GL16 230 70L 1 20 Nitrile Plugged 3.5 bar G1" 938790Q FC7005.QE20.BK
70L210QEBPKG201 FF7006.QE10.BS35.GL20 280 70L 2 10 Nitrile Plugged 3.5 bar G11/4" 938793Q FC7006.QE10.BK
70L220QEBPKG201 FF7006.QE20.BS35.GL20 300 70L 2 20 Plugged 3.5 bar G11/4" 938794Q FC7006.QE20.BK
70L310QEBPKG241 FF7007.QE10.BS35.GL24 400 70L 3 10 Plugged 3.5 bar G11/2" 938797Q FC7007.QE10.BK
70L320QEBPKG241 FF7007.QE20.BS35.GL24 430 70L 3 20 Plugged 3.5 bar G11/2" 938798Q FC7007.QE20.BK
70L410QEBPKG241 FF7008.QE10.BS35.GL24 430 70L 4 10 Plugged 3.5 bar G11/2" 938801Q FC7008.QE10.BK
70L420QEBPKG241 FF7008.QE20.BS35.GL24 450 70L 4 20 Plugged 3.5 bar G11/2" 938802Q FC7008.QE20.BK
70T110QBPKG161 FF7005.Q010.BS35.GT16 150 70T 1 10 Plugged 3.5 bar G1" 938773Q FC7005.Q010.BK
70T120QBPKG161 FF7005.Q020.BS35.GT16 200 70T 1 20 Plugged 3.5 bar G1" 938774Q FC7005.Q020.BK
70T210QBPKG201 FF7006.Q010.BS35.GT20 260 70T 2 10 Plugged 3.5 bar G11/4" 938777Q FC7006.Q010.BK
70T220QBPKG201 FF7006.Q020.BS35.GT20 280 70T 2 20 Plugged 3.5 bar G11/4" 938778Q FC7006.Q020.BK
70T310QBPKG241 FF7007.Q010.BS35.GT24 360 70T 3 10 Plugged 3.5 bar G11/2" 938781Q FC7007.Q010.BK
70T320QBPKG241 FF7007.Q020.BS35.GT24 380 70T 3 20 Plugged 3.5 bar G11/2" 938782Q FC7007.Q020.BK
70T410QBPKG241 FF7008.Q010.BS35.GT24 360 70T 4 10 Plugged 3.5 bar G11/2" 938785Q FC7008.Q010.BK
70T420QBPKG241 FF7008.Q020.BS35.GT24 380 70T 4 20 Plugged 3.5 bar G11/2" 938786Q FC7008.Q020.BK
70T110QEBPKG161 FF7005.QE10.BS35.GT16 150 70T 1 10 Plugged 3.5 bar G1" 938789Q FC7005.QE10.BK
70T120QEBPKG161 FF7005.QE20.BS35.GT16 200 70T 1 20 Plugged 3.5 bar G1" 938790Q FC7005.QE20.BK
70T210QEBPKG201 FF7006.QE10.BS35.GT20 260 70T 2 10 Plugged 3.5 bar G11/4" 938793Q FC7006.QE10.BK
70T220QEBPKG201 FF7006.QE20.BS35.GT20 280 70T 2 20 Plugged 3.5 bar G11/4" 938794Q FC7006.QE20.BK
70T310QEBPKG241 FF7007.QE10.BS35.GT24 360 70T 3 10 Plugged 3.5 bar G11/2" 938797Q FC7007.QE10.BK
70T320QEBPKG241 FF7007.QE20.BS35.GT24 380 70T 3 20 Plugged 3.5 bar G11/2" 938798Q FC7007.QE20.BK
70T410QEBPKG241 FF7008.QE10.BS35.GT24 360 70T 4 10 Plugged 3.5 bar G11/2" 938801Q FC7008.QE10.BK
70T420QEBPKG241 FF7008.QE20.BS35.GT24 380 70T 4 20 Plugged 3.5 bar G11/2" 938802Q FC7008.QE20.BK
Note: Filter assemblies ordered from the product configurator on next page are on extended lead times. Where possible, please make your selection from the table above.

High pressure filters

121
 High Pressure Filters

70/70 Eco Series

Ordering Information (cont.)

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
70L 3 10Q B M3 K G24 1

Box 1 Box 2 Box 3

Code Filter type Degree of filtration
Model Code Length Code Element media Glass fibre
High pressure filter with L-port 70L Length 1 1 Media code
High pressure filter with T-port 70T Length 2 2 Microglass III element 02Q 05Q 10Q 20Q
High pressure filter with side manifold mounting 70B Length 3 3 Ecoglass III element 02QE 05QE 10QE 20QE
Length 4 4 High collapse element 02QH 05QH 10QH 20QH
Note: When using Ecoglass III elements reusable Eco-adaptor is required

Box 4 Box 5 Box 6

Seal type Indicator Bypass and indicator settings
Seal material Code Code Bypass valve Indicator Code
Nitrile B Plugged with steel plug P 3.5 bar 2.5 bar K
Fluoroelastomer V Visual indicator M3 No bypass 7.0 bar N + Box 8: code 2
Electrical indicator T1 No bypass No indicator (P) X + Box 8: code 2
Electronic 4 LED, PNP, N.O. F1 When filter includes a bypass valve but not an indicator,
Electronic 4 LED, NPN, N.O. F2 code denotes bypass setting.
Electronic 4 LED, PNP, N.C. F3
Electronic 4 LED, NPN, N.C. F4

Box 7 Box 8
Filter connection Options
Connections Code Length 1 Length 2 Length 3 Length 4 Options Code
Thread G 1 G16 S S x x Standard 1
Thread G 1 1/4 G20 S S S S No bypass 2
Thread G 1 1/2 G24 x S S S Drain port 4
SAE flange 1 1/4" 3000-M R20 x x x x 70T: side indicator ports 6
SAE flange 1 1/2" 3000-M R24 x x x x 70T: options 2 + 6 8
SAE flange 1 1/4" 6000-M H20 x x x x Options 6 and 8: in 70T model there is an option for 2 x indicator
SAE flange 1 1/2" 6000-M H24 x x x x ports on filter outlet flange (standard indicator port not machined)
Side manifold (70B only) X32 x x x x P: both side indicator ports plugged with steel plug
M3 or other indicator chosen: right side (in flow direction) port
Availability: S = standard product
plugged with a plastic plug, left with a steel plug
x = non-standard, ask for availability

Nominal flow (I/min) at viscosity 30 cSt Replacement elements with nitrile seals
G16 L-port & G20 L-port & Media Length 1 Length 2 Length 3 Length 4
Filter length Media G16 T-port G20 T-port Side manifold G24 T-port G24 L-port 02Q 938771Q 938775Q 938779Q 938783Q
Length 1 02Q/02QE 80 80 80 80 80 05Q 938772Q 938776Q 938780Q 938784Q
05Q/05QE 120 120 120 120 120 10Q 938773Q 938777Q 938781Q 938785Q
10Q/10QE 150 150 150 150 150 20Q 938774Q 938778Q 938782Q 938786Q
20Q/20QE 200 230 230 230 230 02QE 938787Q 938791Q 938795Q 938799Q
Length 2 02Q/02QE 160 160 160 160 160 05QE 938788Q 938792Q 938796Q 938800Q
05Q/05QE 180 200 200 200 200 10QE 938789Q 938793Q 938797Q 938801Q
10Q/10QE 220 260 280 300 320 20QE 938790Q 938794Q 938798Q 938802Q
20Q/20QE 240 280 300 330 350 02QH 938803Q 938807Q 938811Q 938815Q
Length 3 02Q/02QE 200 220 220 220 220 05QH 938804Q 938808Q 938812Q 938816Q
05Q/05QE 220 250 280 280 280 10QH 938805Q 938809Q 938813Q 938817Q
10Q/10QE 240 280 300 350 400 20QH 938806Q 938810Q 938814Q 938818Q
20Q/20QE 250 300 320 380 430
Length 4 02Q/02QE 220 250 270 270 270 Highlights Key (Denotes part number availability)
05Q/05QE 230 260 300 330 330 123 Item is standard
10Q/10QE 250 280 330 360 430 123 Item is standard green option
20Q/20QE 260 300 350 380 450 123 Item is semi standard
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within
four weeks

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
% efficiency, based on the above beta ratio (ßx) Disposable Metal free High collapse
Note 1: Part numbers featured with bold
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III Ecoglass III element
highlighted codes will ensure a ‘standard’
N/A N/A N/A N/A N/A 4.5 02Q 02QE 02QH product selection.
N/A N/A 4.5 5 6 7 05Q 05QE 05QH Note 2: Alternate displayed part number
N/A 6 8.5 9 10 12 10Q 10QE 10QH selection will require you to contact Parker
6 11 17 18 20 22 20Q 20QE 20QH Filtration for availability.

122 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 15
 High Pressure Duplex Filters

22PD/32PD Series
MAX 260 I/min - 210 bar

High pressure filters

123
 High Pressure Duplex Filters

22PD/32PD Series
Features & Benefits

Features Advantages Benefits

Duplex design Element service possible during operation Allows to keep machine running with
full contamination protection
Integrated balancing valve No external piping required Safety and reliability
Vent ports Purges all trapped air in filter Get the maximum performance from
the elements
Prevents a "flabby" system
Microglass III replacement elements Multi-layered design produced high capacity Great performance value
and efficiency
Reliable performance throughout
element life
Wire support reduces pleat bunching, keeps Reduces downtime, maximises
performance consistent element life
Visual, electrical and electronic Check element condition at a glance Optimises element life, prevents
indicators available bypassing
Right style for the application Matches your system electrical
connections

Typical Applications

Ship steering systems

Continuous operation
industrial systems
High flow flushing systems

The Parker Filtration 22PD/32PD Series

High Pressure Duplex Filters.
Specially designed to offer continuous operation,
even during element change.
A changeover valve operates on the upstream side
of the filter, ensuring a contamination free system.

124 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 16
Specification

Pressure ratings: Flow fatigue characteristics:

Maximum allowable operating pressure 210 bar. Filter media is supported so that the optimal fatigue life is achieved
Filter housing pressure pulse fatigue tested: 106 cycles 210 bar. (ISO 3724).
Connections: Microglass III:
Inlet and outlet connections are threaded. Supported with epoxy coated metal wire mesh, end cap material
Connection style Model reinforced composite and metal inner core. Collapse rating 20 bar
22PD 32PD (ISO 2941).
BSPF(G) 1” 11/4” High collapse elements:
Flange SAE 3000-M 11/4” 11/2” (to be used when no bypass function in filter housing).
*3000-M is a SAE style with appropriate metric fixing threads. Microglass III media supported with epoxy coated metal wire mesh on
Filter housing: upstream and stainless steel on downstream, end cap material steel.
Head material cast iron (GSI). Strong metal inner core. Collapse rating 210 bar (ISO 2941).
Bowl material steel. Indicator options:
Seal material: Indicating differential pressure: 2.5 ± 0.3 bar.
Nitrile or Fluoroelastomer. - visual M3.
Operating temperature range: - electrical T1.
-20°C to +100°C. - electronic F1(PNP).
- electronic F2(NPN).
Bypass valve: For indicator details see catalogue section 6.
Opening pressure 3.5 bar
Weights (kg):
Filter element: Model Length 1 Length 2
Degree of filtration: 22PD 22 27
Determined by multipass-test according to ISO 16889. 32PD 44 50
Fluid compatibility:
Suitable for use with mineral and vegetable oils, and some synthetic oils.
For other fluids, please consult Parker Filtration.

Dimensions mm (inches)
Model A B C D E F G H I J K L M N
22PD-1 240 35 92 18 55 150 150 96 192 60 30 59 30.75Ø 236 (9.29)
22-PD-2 (9.45) (1.38) (3.62) (0.71) (2.16) (5.91) (5.90) (3.70) (7.56) (2.36) (1.18) (2.32) 345 (13.58)
32PD-1 306 42 130 20 78 170 165 120 240 75 36 70 38Ø 317 (12.48)
32PD-2 (12.05) (1.65) (5.12) (0.79) (3.07) (6.69) (6.49) (4.72) (9.45) (2.95) (1.42) (2.75) 437 (17.20)

A
D
Indicator location

mm
In Out B
(inches) E
G
J
I
H
40 mounting holes
22PD: M8x1.2 pitchx12 deep
32PD: M10x1.5 pitchx15 deep 2 bleed F
holes
N G1/8

Changeover Bleed valve

handle Balance valve

Hexagon Flange face detail

22PD Bowl
C Both 22PD & 32PD
24 A/F removal M12x1.72 pitch
L
32PD 100mm x20 deep
36 A/F (3.93)

M
K

High pressure filters

125
 High Pressure Duplex Filters

22PD/32PD Series
Pressure Drop Curves

The recommended level of initial pressure drop is max. 1.2 bar.

If the medium used has a viscosity different from 30 cSt, pressure drop over the filter can be estimated as follows:
p = ( p30 x viscosity of medium used) / 30 cSt.
The total p = housing ph + (element pe x working viscosity/30).

22PD/32PD Bypass Valve 22PD/32PD Empty Housing

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 92 106 0 13 26 39 53 66 79 92 106
3.0 43.5 2.0 29.0

2.5 36.3 22PD

1.5 21.8
2.0 29.0
Cracking
Δp (PSID)

Δp (PSID)
32PD
Δp (bar)

Δp (bar)
Pressure
1.5 21.8 1.0 14.5

1.0 14.5
0.5 7.3
0.5 7.3

0.0 0 0.0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
Flow (l/min) Flow (l/min)

22PD-1 Elements 22PD-2 Elements

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79
3.0 43.5 3.0 43.5

2.5 36.3 2.5 36.3

02Q
2.0 29.0 2.0 29.0
Δp (PSID)

Δp (PSID)
05Q
Δp (bar)

Δp (bar)

1.5 21.8 1.5 21.8

10Q 02Q 05Q
1.0 14.5 1.0 14.5
10Q
20Q
0.5 7.3 0.5 7.3
20Q
0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

32PD-1 Elements 32PD-2 Elements

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79
3.0 43.5 3.00 13 26 39 53 66 79
43.5

2.5 36.3 2.5 36.3

2.0 29.0 2.0 29.0

Δp (PSID)

Δp (PSID)

02Q
Δp (bar)

Δp (bar)

1.5 21.8 1.5 21.8

05Q
1.0 14.5 1.0 14.5
02Q
10Q 05Q
0.5 7.3 0.5 7.3
20Q 10Q
0.0 0 0.0
20Q 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

126 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 16
 22PD-1 High Collapse Elements 22PD-2 High Collapse Elements
Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79
3.00 13 26 39 53 66 79
43.5 3.0 43.5

2.5 36.3 2.5 36.3

02QH 05QH 10QH 02QH
2.0 29.0 2.0 29.0

Δp (PSID)

Δp (PSID)
20QH
Δp (bar)

Δp (bar)
05QH
1.5 21.8 1.5 21.8
10QH
1.0 14.5 1.0 14.5
20QH
0.5 7.3 0.5 7.3

0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

32PD-1 High Collapse Elements 32PD-2 High Collapse Elements

Flow (US GPM) Flow (US GPM)

0 13 26 39 53 66 79 0 13 26 39 53 66 79
3.0 43.5 3.0 43.5

2.5 36.3 2.5 36.3

02QH 05QH 02QH
2.0 29.0 2.0 29.0
Δp (PSID)

Δp (PSID)
Δp (bar)

Δp (bar)

10QH 05QH
1.5 21.8 1.5 21.8
10QH
1.0 14.5 1.0 14.5
20QH 20QH
0.5 7.3 0.5 7.3

0.0 0 0.0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow (l/min) Flow (l/min)

Ordering Information

Standard products table

Part number Supersedes Flow Model Element Media Seals Indicator Bypass Ports Replacement
(l/min) number length rating (µ) settings elements
22PD210QBM3KG161 0-22-PD-2-10Q-V-50-C-1 120 22PD Length 2 10 Nitrile Visual 3.5 bar G1" G01315Q
22PD210QBT1KG161 0-22-PD-2-10Q-TW3-50-C-1 120 22PD Length 2 10 Nitrile Electrical 3.5 bar G1" G01315Q
22PD220QBM3KG161 0-22-PD-2-20Q-V-50-C-1 140 22PD Length 2 20 Nitrile Visual 3.5 bar G1" G01938Q
22PD220QBT1KG161 0-22-PD-2-20Q-TW3-50-C-1 140 22PD Length 2 20 Nitrile Electrical 3.5 bar G1" G01938Q
32PD210QBM3KG201 0-32-PD-2-10Q-V-50-D-1 240 32PD Length 2 10 Nitrile Visual 3.5 bar G11/4" G01098Q
32PD210QBT1KG201 0-32-PD-2-10Q-TW3-50-D-1 240 32PD Length 2 10 Nitrile Electrical 3.5 bar G11/4" G01098Q
32PD220QBM3KG201 0-32-PD-2-20Q-V-50-D-1 260 32PD Length 2 20 Nitrile Visual 3.5 bar G11/4" G01954Q
32PD220QBT1KG201 0-32-PD-2-20Q-TW3-50-D-1 260 32PD Length 2 20 Nitrile Electrical 3.5 bar G11/4" G01954Q
Note: Filter assemblies ordered from the product configurator on the next page are on extended lead times. Where possible, please make your selection from the table above.

High pressure filters

127
 High Pressure Duplex Filters

22PD/32PD Series
Ordering Information (cont.)

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
22PD 2 10Q B M3 K G16 1

Box 1 Box 2
Code Filter type
Model Code Length Code
Small high pressure duplex filter 22PD Length 1 1
Large high pressure duplex filter 32PD Length 2 2

Box 3 Box 4
Degree of filtration Seal type
Element media Glass fibre Seal material Code
Media code Nitrile B
Microglass III element 02Q 05Q 10Q 20Q Fluoroelastomer V
High collapse element 02QH 05QH 10QH 20QH

Box 5 Box 6
Indicator Bypass and indicator settings
Code Bypass valve Indicator Code
Visual indicator M3 3.5 bar 2.5 bar K
Electrical indicator T1 No bypass 5.0 bar M + Box 8: code 2
Plugged with steel plug P No bypass No indicator X + Box 8: code 2
No indicator port N When filter includes a bypass valve but not an indicator,
Electronic 4 LED, PNP, N.O. F1 code denotes bypass setting.
Electronic 4 LED, NPN, N.O. F2
Electronic 4 LED, PNP, N.C. F3
Electronic 4 LED, NPN, N.C. F4

Box 7 Box 8
Filter connection Options
Ports Code Options Code
22PD: Thread G 1 G16 Standard 1
SAE flange 1 1/4" 3000-M R20 No bypass 2
32PD: Thread G 1 1/4 G20
SAE flange 1 1/2" 3000-M R24

Replacement elements with nitrile seals Nominal flow (I/min) at viscosity 30 cSt
Media 22PD-1 22PD-2 32PD-1 32PD-2 Filter model 02Q 05Q 10Q 20Q
02Q G01282Q G01316Q G01069Q G01099Q 22PD-1 70 80 100 120
05Q G02721Q G02724Q G02567Q G02727Q 22PD-2 100 110 120 140
10Q G01281Q G01315Q G01068Q G01098Q 32PD-1 100 150 210 230
20Q G01930Q G01938Q G01946Q G01954Q 32PD-2 180 210 240 260
02QH G01442Q G01448Q G01454Q G01460Q
05QH G03737Q G03738Q G03739Q G03740Q
10QH G01441Q G01447Q G01453Q G01459Q
Seal kits
Filter model Nitrile Fluoroelastomer
20QH G01932Q G01940Q G01948Q G01956Q
22PD S04233 S04234
32PD S02373 S02375
Replacement elements with fluoroelastomer seals
Media 22PD-1 22PD-2 32PD-1 32PD-2
02Q G01302Q G01336Q G01089Q G01119Q
05Q G02723Q G02726Q G02569Q G02729Q Highlights Key (Denotes part number availability)
10Q G01301Q G01335Q G01088Q G01118Q
123 Item is standard
20Q G01934Q G01942Q G01950Q G01958Q
123 Item is standard green option
02QH G01446Q G01452Q G01458Q G01464Q
123 Item is semi standard
05QH G04235Q G04236Q G04237Q G04238Q
123 Item is non standard
10QH G01445Q G01451Q G01457Q G01463Q
20QH G01935Q G01943Q G01951Q G01959Q Note: Standard items are in stock, semi standard items are available within four weeks

Degree of filtration
Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Code
ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
% efficiency, based on the above beta ratio (ßx) Disposable High collapse
50.0% 90.0% 98.7% 99.0% 99.5% 99.9% Microglass III element
N/A N/A N/A N/A N/A 4.5 02Q 02QH Note 1: Part numbers featured with bold highlighted codes
N/A N/A 4.5 5 6 7 05Q 05QH will ensure a ‘standard’ product selection.
N/A 6 8.5 9 10 12 10Q 10QH Note 2: Alternate displayed part number selection will
6 11 17 18 20 22 20Q 20QH require you to contact Parker Filtration for availability.

128 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 16
 Portable Hydraulic Filtration Systems

Guardian MAX 15 I/min - 2 bar

®

Portable filtration systems

129
 Portable Hydraulic Filtration Systems

Guardian ®

Features & Benefits Application Example

A hydraulic system reservoir had become heavily

Features Advantages contaminated and the hydraulic system was in danger of a
Portable and robust Guardian is designed to be used anywhere. catastrophic failure from particulate and water contamination.
design Take it to the system or transfer new oil These contaminants were introduced from various points
from the drum. – airborne, wear and introduction of new ‘dirty’ fluids. The
Lightweight design Only 10.6 kg Guardian filtration system was installed into the hydraulic
Quick disconnect Storage is simple. Guardian’s compact systems reservoir and run completely off-line for a period of
hose connections design means it is easily stowed. time until acceptable contamination levels were achieved.
Visual indicator Operational condition is constantly monitored
110VAC or Guardian’s power flexibility means it can This off-line attachment allowed the hydraulic system to
220/240VAC options be used anywhere. continue operating without costly downtimes. Additionally a
A range of clean-up A user can specify the media that will best Water Removal (WR) Element was also fitted to the Guardian,
elements achieve his clean up/filtering requirements. which radically reduced the water contamination within the
Water removal element Water removal from the system is an entire system.
option important requirement for fluid efficiency.
This customer will ‘only now’ introduce new fluids into his
Note: 15 l/min / Fluid transfer at a controlled rate
hydraulic application by using the Guardian filtration system
and in addition utilises the Guardian off-line option to maintain
and protect his system.

Contamination levels are monitored by an LCM202021 which

controls the Guardians operation.

Result: reliability and complete confidence restored.

Typical Applications

• Fluid transfer
• Offline reservoir clean-up
• Injection moulding machines
• Royal navy surface fleet systems
• Paper mills
• Industrial equipment
• Mobile equipment
• Marine system support

The Parker Filtration Guardian®

portable filtration systems.
Guardian is a portable filtration system with two
main functions: to ensure that new ‘dirty’ fluid
often contaminated during handling, is delivered
to the system at a specific cleanliness; and to
permit periodic clean up of existing fluid to
original condition.
Recommended fluids: Petroleum based oils,
water emulsions and diesel fuels.

130 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 17
Specification

Non conductive
carrying handle
1.7 bar differential
visual indicator 140 minimum element
Quick access zero leakage 3/4” -
removal clearance
11.5 NH hose connections

Removable element

208mm

Vibration isolating rubber feet 4-pls

/ ” wire reinforced flexible outlet
3 4

hose, 1.6m (63 inches) length

inlet hose, 1.6m
(63 inches) length 3/4” wire reinforced
/ ” – 11.5 NH hose thread (outlet)
3 4

flexible outlet hose,

1.6m (63 inches) length Motor is UL recognised & CSA listed

On/off switch

195mm (7.68”)
Inlet

51mm (2.00”)
Outlet

152mm
Visible & easily cleanable inlet strainer
(5.98”)
394mm
Alternative customer selectable inlet and outlet ports (plugged)
(15.57”)

Portable filtration systems

131
 Portable Hydraulic Filtration Systems

Guardian ®

Ordering Information and Product Configurator

Standard products table

Part number Supersedes Model (fluorocarbon) Motor Element Options Plug type Replacement
option (µ) element
GT4E110Q1UK F3-GT4E-1-10Q-1-UK GT4E 1 10Q 1 UK G04396Q
GT4E110Q1EUR F3-GT4E-1-10Q-1-EUR GT4E 1 10Q 1 EUR G04396Q
GT4E210Q1IND F3-GT4E-2-10Q-1-IND GT4E 2 10Q 1 IND G04396Q

Product configurator
Model (fluorocarbon) Motor options Element (µ) Options Plug type

GT4E 1 220/240 VAC 10Q 1 None UK United Kingdom

Quick disconnect
2 * 110 VAC 02Q 6 EUR Europe
hose connections
Microglass
Industrial 3 pin
3 ~ 24 Vdc 05Q IND
*110 version only
~ Battery clamps
20Q CL
(24Vdc Only)

25W

40W Wire mesh

74W

WR Water removal

Replacement elements
Guardian replacement elements to ISO16889
Part number Micron rating Media type
G04396Q 10 Microglass III
G04394Q 4.5 Microglass III
G04395Q 6 Microglass III
G04397Q 20 Microglass III
G04400 25 Wire mesh
G04401 40 Wire mesh
G04402 74 Wire mesh
G04403 WR Water removal
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you
to contact Parker Filtration for availability.

132 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 17
 Hydraulic Service Equipment

Filtration UnitMAX 15 I/min - 6 bar

Portable filtration systems

133
 Hydraulic Service Equipment

Filtration Unit
Features & Benefits

Features Advantages Benefits

Single phase and three phase Flexibility of power output End user choice dependent on
motor options application
15 l/min flow Fluid transfer at a controlled rate Reliable fluid transfer from drum to
system
Red/green visual indicator Clear indication of condition during operation High visibility during operation
Robust construction Reliability designed in Designed to be used even in the most
demanding conditions
Spin-on element Easy change element 10 micron Abs. elements
Lightweight design Easy to locate when and where required Take the unit to the application.
It’s that easy

Typical Applications

Fluid transfer
Small lubrication systems
Constant flushing loops
Maintenance flushing
Offline filtration in circuits
where pressure and flow
pulses are expected

The Parker Filtration Service Equipment.

Designed to offer both permanent offline cleaning
where higher levels of contamination are expected
and portable additional clean-up capability as part
of your preventative maintenance package.

134 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 18
Specification

Electric motor Pump and bypass valve

Frame Size: IEC Frame 63. Foot and flange ‘D’ Pump: Lobe type for quiet running.
(Flange IEC.F115). Totally enclosed Flow: 15 l/min.
fan cooled. Connections: Inlet G1/2 (1/2” BSP).
Windings: 380/420 volt 3 ph/50 Hz, 220 Volt 1 Outlet G3/8 (3/8” BSP).
ph/50 Hz 110 Volt 1 ph/50 Hz. Bypass Valve: Cracks at 1.5 bar approximately. Bypassed oil is recirculated within
Power: 0.18 kW (1/4 hp). the pump. Bypassed oil is reintroduced into the inlet port and does
Speed: 1400 rev/min. not pass the filter. Bypass operates when the element is
contaminated
It is recommended that the Unit is wired and needs replacing. This condition will be made clear by the visual
independently from the main system when indicator. The Bypass Valve could also open when being used with
permanently installed, to facilitate the simple high viscosity fluids, thus effectively reducing the unit output.
changing of the filter element without interrupting
the main system. Filter and condition indicator
Filter Type: Rapid replacement spin-on can with 10µ cellulose element.
Filtration unit description Ensure that end clearance (20mm) is available to
The Parker ‘Filtration Unit’ consists of an electric permit element withdrawal.
motor directly coupled to a hydraulic pump, 10µ nominal. MXR8550
which has a built in bypass fitted and spin on filter
element. Fluid drawn in at pump inlet is circulated Visual indicator
through the filter element and is thus cleaned Has green and red zones on the dial. Needle in the green zone indicates normal
before being delivered from the outlet port. A built operation. When the needle enters the red zone, the bypass valve will permit a flow
in bypass valve safeguards the element in the event of oil to return to the pump inlet – The element will then need to be replaced. The
of blockage and returns oil to the pump inlet, this bypass is fully open when the needle is at the extreme of the red sector.
ensures that all fluid output from the unit is filtered,
whatever the operating conditions. A visual element Sound level
condition indicator is fitted to the pump. A unit is The Filtration Unit under normal conditions will operate at a sound pressure level of
available without electric motor for customers who approximately 65 dBA.
prefer to supply their own. See installation notes
and part numbers for ordering.

Installation Details
mm 155 (6.1)
(inches) 100 (3.94)
432 66
(17.0) (2.60)
A 105 (4.13)
(2.95)
75
(6.97)
177

(2.80)
71

90 CRS 45 8 147 112 CRS (4.76)

(3.54) (1.77) (0.31) (5.78)
131 (5.16)
4 x Ø7
4 x (0.27) Ø140 (5.51)
/ ” BSP (G / )
3 8 3 8

Single Three
Ø125 (4.92)
Ø140 (5.51)

phase phase
(3.70)
Ø94

Dimension A 221 184

(8.70) (7.24)
Dimension B 45 25
20 (1.77) (0.98)
(0.79)
/ ” BSP (G 1/2)
1 2

Portable filtration systems

135
 Hydraulic Service Equipment

Filtration Unit
Sectioned Detail

Outlet

Pump delivery of oil 10µ ‘Multipass’

900 L (235 USG)/HR tested element

Inlet

Out

Circuit symbol

Enlargement of
bypass valve

In

Various electronic
motor options Integral bypass

Installation and Operational Notes

The Filtration Unit is suitable for mineral based oils. Maximum Installation details – 2742
viscosity at start up condition 850 centistokes-minimum
The Filtration Unit is available without an electrical motor, any
viscosity 8 centistokes. Note that at 850 centistokes output
type motor may be used of identical frame, flange and shaft
will be reduced due to opening of bypass. Maximum operating
size to that stated in the specification. Remove the key, fitted
temperature +90°C (194°F).
to electric motor shaft. There are four nuts and bolts M8-
The inlet pipe should be as large and as short as convenient 1.25mm thread supplied loose, the pump housing is complete
to reduce inlet depression to a minimum. It should not be less with a shaft adaptor with internal drive pin.
than 12mm (0.47”) internal diameter.
To fit pump to electric motor simply insert drive shaft of motor
Suction element SE75111110 is supplied with all assemblies into the pump drive adaptor ensuring the drive pin engages
and must be installed. Ensure that a minimum 75mm (2.95”) in shaft keyway and that the locating spigot are correctly
head of oil is maintained above the suction element. engaged. Complete the assembly by fitting the four nuts,
bolts and washers.
The outlet pipe should be as large as possible to reduce
the possibility of delivery pressure exceeding the bypass
valve setting. It should not be less than 10mm (0.39”) internal
diameter. The discharge end of this pipe should always
be below the oil surface to minimise aeration. It is equally
important, to ensure the ends of the inlet and outlet pipes
are as far apart as possible. It is recommended that a baffle
be positioned between the suction and return pipes, to give
maximum circulation of oil.

136 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 18
Ideal Application

Element withdrawal
clearance minimum 20
(0.78) Inlet G1/2 (1/2 BSP)
Outlet
Suction flange G3/8 (3/8 BSP)

Return bush

112 CTRS
(4.41) Oil level
90 CTRS 70 12 bore

minimum
75 (2.95)
(3.54) (2.75) minimum

4-off holes Ø7 (motor fleet) 10 bore minimum

tap M6 for installation (0.39)

(0.47)
Baffle recommended
Element condition indicator 12
Green area – bypass closed
SE75111110
Entering red area – bypass cracked
Extreme of red area – bypass Suction element
fully open. 250 minimum
(9.84)

Ordering Information

Standard products table

Part number Description Weight Replacement elements
10µ nom filtration pump complete with 3 phase electric motor 5.92 Kg
2741
(380/420/50 Hz H.E.F.C class F) visual indicator (13.02 lbs)
10µ nom filtration pump without electric motor (supplied with 1.50 Kg
2742
4 x nuts,bolts and washers) visual indicator (3.3 lbs) MXR8550
10µ nom filtration pump complete with single phase electric 6.20 Kg (10µ nominal)
2743
motor (220/50 Hz T.E.F.C class F) visual indicator (13.64 lbs)
10µ nom filtration pump complete with single phase electric 6.20 Kg
2744
motor (110/50 Hz T.E.F.C class F) visual indicator (13.64 lbs)
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for Availability

Portable filtration systems

137
Notes

138 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Portable Filtration Trolley

10MF Series MAX 38 I/min

Portable filtration systems

139
 Portable Filtration Trolley

10MF Series
Features & Benefits

The 10MF Portable Filtration System is ideal for:

Off-line contamination control of fluid systems
Replenishing installations with filtered fluid
Emptying waste fluid quickly
The 10MF Filter system is designed for on-site preventive maintenance
of fluid systems. Two high capacity filters are used, with fluid passing
through a primary clean-up filter and then through the final polishing
filter giving highly effective and reliable contamination control.
Two high capacity filters, complete with indicators element
condition
Filters incorporate standard Parker media.
38 l/min pressure balanced gear pump
0.75kW @ 3450rpm electric motor with themal overload
protection
Robust all welded steel trolley, complete with drip tray and
rubber
tyred wheels
Complete with stowable hoses

Fluid flow path through 10MF portable filtration system when viewed
from front, electrical switch to rear

Typical Applications

Paper mills
Injection and blow moulding equipment
Industrial & mobile equipment
Transferring fluid from drums or storage tanks
to system reservoirs
Off-line conditioning of existing fluids
Complimenting existing system filtration

The Parker Filtration 10MF portable filtration system.

Parkers portable filtration units are designed for on-site
preventative maintenance of fluid systems. An internal pump
draws fluid through a primary clean-up filter and then pushes
the fluid through a high quality polishing filter to remove
particulate contamination down to 4µm (c) absolute.
Water can also be removed by installing Parker’s Par-Gel™
water removal elements to the outlet filter. Once the water
comes into contact with the Polymer element it will be removed
from the fluid. An all round solution for contamination control in
your critical system

140 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 19
Specification

Pump drive options: Filter elements:

0.75kW Electric motor 220/240v A.C. Single Inlet - synthetic, stainless steel mesh optional.
phase 50HZ 0.75kW Electric motor 110V Outlet - 10Q Microglass III, other µ ratings and WR optional.
A.C. Single phase 50HZ. Filter bypass valve settings:
Pump: Inlet - 0.2 bar (3 psi).
38 l/min pressure balanced gear pump. Outlet - 1.7 bar (25 psi).
Filters: Visual indicator:
Moduflow CF2.1 & RF2.1 filters. 3 band visual differential (clean, change, bypass).
Electrical details: Construction:
On/Off switch. 2 metre cable. Cart frame - steel, filter head - aluminium.
Weight: Filter bowl - steel, hoses - PVC standard.
45.4 kg. Motor options:
Fluid compatibility: 220/240 VAC.
Suitable for use with mineral oils. For other 110 VAC.
fluids, please consult Parker Filtration. Operating temperatures:
Max recommended fluid viscosity: -40°C to 66°C Nitrile.
108 cSt.
Seals:
Nitrile.

Installation Details
1029

648
483

Portable filtration systems

141
 Portable Filtration Trolley

10MF Series
Ordering Information

Standard products table

Part number Supersedes Model Motor Inlet element Outlet element Options Plug type Replacement elements
(fluorocarbon) option (924448) (924453Q) Inlet Outlet
10MF140SA10Q1UK 10MF-1-40SA-10Q-1-UK 10MF 1 40SA 10Q 1 UK 924448 G00973Q
10MF140SA10Q1EUR 10MF-1-40SA-10Q-1-EUR 10MF 1 40SA 10Q 1 EUR 924448 G00973Q
10MF240SA10Q1IND 10MF-2-40SA-10Q-1-IND 10MF 2 40SA 10Q 1 IND 924448 G00973Q

Product configurator
Model (fluorocarbon) Motor options Inlet element Outlet element Options Plug type
options (µ) options (µ)

10MF 1 220/240 VAC 40SA Synthetic 10Q Microglass III 1 None UK Moulded 3 pin

Stainless steel
2 * 110 VAC 40W 02Q Microglass III 3 Magnet pack EUR Moulded 2 pin
mesh
Stainless steel
20Q 05Q Microglass III IND* 3 pin industrial
mesh
Stainless steel
74W 20Q Microglass III
mesh
Par<>Gel water
WR
removal

Replacement elements
10MF replacement inlet elements 10MF replacement outlet elements
Nitrile seals Nitrile seals
Part number Micron rating µm(c) Media type Part number Micron rating µm(c) Media type
924448 40 Synthetic G00973Q 10 Microglass III
G02525Q 20 Microglass III G04687Q 4.5 Microglass III
G00968 40 Stainless steel G00974Q 6 Microglass III
G00967 74 Stainless steel G02525Q 20 Microglass III
Note 1: Part numbers featured with bold highlighted codes will 927584 WR Water removal
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you
to contact Parker Filtration for availability.

142 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 19
 Portable Purification Systems

PVS Series - Models 185,

600, 1200, 1800 and 2700

Portable filtration systems

143
 Portable Purification Systems

PVS Series
Effects of Water Contamination Principles of Operation

Water is one of the most common and destructive Contaminated oil is drawn into the Parker portable
contaminants in a fluid system. When water purification system by a vacuum of 25 In/Hg. The
contaminates a system, it can cause serious oil passes through the in-line low watt density
problems such as: heater/s where the oil is heated to an optimum
temperature of 66°C (150°F).
Corrosion by etching metal
Fluid breakdown, reduction of lubricating The oil then enters the distillation column where it is
properties, additive precipitation, and oil exposed to the vacuum through the use of dedicated
oxidation dispersal elements. This increases the exposed
surface area of the oil and converts the water to
Reduced dielectric strength
a vapor form, which is then drawn through the
Abrasive wear in hydraulic components condenser by the vacuum pump. The vapour returns
to water and drops into the condensate holding tank
Typical saturation points
- this can then be drained off at a later stage.

Fluid type PPM % The water-free oil falls to the bottom of the vacuum
Hydraulic fluid 300 .03%
chamber and is passed through a final particulate
removal filter by a heavy duty lube oil pump.
Lubrication fluid 400 .04%
Transformer fluid 50 .005% Clean dry oil re-enters the reservoir/system via the
outlet port.
Free water occurs when oil becomes saturated
and cannot hold any more water. This water is
usually seen as cloudy oil or puddles of water
at the bottom of an oil reservoir. Water which is
absorbed into the oil is called dissolved water.
At higher temperatures, oil has the ability to hold
more water in the dissolved stage due to the
expansion of oil molecules. As the oil cools, this
ability reverses and free water will appear where
not visible before. In addition to temperature, fluid
type also determines the saturation point for your
system (see chart above).

250
% Bearing Life Remaining

200

150

100

50

0
% Water In Oil

144 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 20
Applications for PVS Portable Purification Systems

Paper mills
- Dryer lubrication Low watt density
heater
- Hydraulic Air Cooled
Condenser
- Compressor lubrication Self diagnosing
controls include:
- Calenders Programmable
thermostat
Steel mills
Reverse pole switch/
- Bearing lubrication phase fail
% RH display
- Continuous casters
- Press roll lubrication
Condensate
Power generation holding tank

- Turbine oil
- Transformer oil Liquid level sight
glass
- EHC systems Vacuum pump

Industrial/aerospace
Caster wheels
- Test stands Forklift guides

- Machine tools

Features Advantages Benefits

Variable flow circuit Allows oil to heat to required Starts removing water quickly
temperature quickly
Moisture sensor Real-time water content indication Indicates when safe water content level
is obtained
Condensate holding tank Captures removed water/solvents Eliminate potential hazard of exhausting
Large enough to provide long service to atmosphere
interval Reduced maintenance costs
Compact size Smallest envelope in the industry Fits through doorways and down
Ease of portability narrow aisles
Increased use
Forklift guides Provides safe and secure method to Employee safety
Lifting eyes lift unit Easily transported
Programmable thermostat Maintains oil within 1°C Unattended operation
Prevents overheating oil Increases oil life
Automatic operation Unattended use Reduced labour costs
Increased running time
Reverse pole switch/phase fail Change motor rotation for different power Flexibility, less maintenance
source locations Prevents incorrect rotation
High temperature safety circuit Shuts down heater if primary Prevents system damage
contacters fail
Oil can never exceed 120°C (250°F) Worker safety
Circuit breakers utilised in No fuses to replace Fewer spare parts, increased uptime
electrical panel Simple diagnostics Reduced maintenance
Available with EPR seals and Phosphate ester compatible Specifically designed for application
stainless steel
Solid state heater contacter Longer more reliable service life Reduced downtime

Portable filtration systems

145
 Portable Purification Systems

PVS Series
Typical Performance

Potential PVS Tank size 227 litres (50 gallons)

contaminant performance
Solid particulate ISO cleanliness code* Run time 62 minutes
14/13/10 attainable
Water Removes 100% of free water,
Parker model PVS 600 (37.9 l/min)
80-90% of dissolved water.
Air Removes 100% of free air,
Water content (ppm) Start: 10,000 PPM (1.0%)
90% of dissolved air.
Stop: 50 PPM(0.005%)
Gases Removes 100% of free gases,
90% of dissolved gases.
Contamination level Start: ISO 21/18/16
* When utilising 2Q media
Stop: ISO 16/14/11
PVS (Vacuum dehydration)
compared to other technologies
Centrifuge units – Removes free water only; has difficulty
breaking stable emulsions; larger envelope dimensions but
lower flows; higher initial and operating costs.
Desiccant units – Have limited water removal capability due
to absorbing material; only removes air ingressed particles;
expensive compared to the volume of water removed.
Coalescer units – Removes free water only; has difficulty
breaking stable emulsions; does not work well in viscous fluids Start Stop
(>23cSt); much larger in size compared to PVS.

Estimated Water Removal Time

5000 ppm (0.5%) to 150 ppm (0.015%)
Reservoir Size (Litres)
0 5000 10000 15000 20000 25000 30000 35000
120

100
PVS185
80
Total Hours

PVS600
60
PVS 1200
40
PVS 1800
20
PVS 2700
0
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
Reservoir Size (Gallons)

146 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 20
 Portable Purification Systems

PVS 185
Specification

Flow rate: Viscosity (max):

19 lpm (4.2 gpm). 108 cSt (500sus) – disposable.
Height: 460 cSt (2150 sus) – packed
1651mm (65”). tower.
Width: Outlet pressure (max):
825.5mm (32.5”). 4.1 bar (60 psi).
Length: Ports:
3/4” JIC (male) inlet.
1206.5mm (47.5”).
3/4” JIC (male) outlet.
Weight:
294.8 kg (650 lbs). FLA (full load amps):
Seal material: 15-41 amps.
Fluorocarbon (EPR opt.). (Depending on voltage used).
Condensate tank:
15.5 ltrs (3.4 gals).
Dispersal elements:
1.
Minimum operating capacity:
18.9 ltrs (4.2 gals).
Vacuum (max):
25 In/Hg.

Replacement elements PVS 185 flow diagram

Particulate
2Q (2 micron) 932665Q
5Q (5 micron) 932666Q
10Q (10 micron) 932667Q
20Q (20 micron) 929927Q
Dispersal
Disposable 933180
(coalescing)
Packed tower 933553
(cleanable)
Coreless
02QE 933734Q Heater
05QE 933612Q
10QE 933735Q
20QE 933736Q

Portable filtration systems

147
 Portable Purification Systems

PVS 600
Specification

Flow rate: Viscosity (max):

38 lpm (8.3 gpm). 108 cSt (500sus) – disposable.
Height: 460 cSt (2150 sus) – packed
1638.3mm (64.5”). tower.
Width: Outlet pressure (max):
1117.6mm (44”). 4.1 bar (60 psi).
Length: Ports:
1549.4mm (61”). 1” JIC (male) inlet.
1” JIC (male) outlet.
Weight:
408.2 kg (900 lbs). FLA (full load amps):
24-38 amps.
Seal material: (Depending on options
Fluorocarbon (EPR opt.). & voltages).
Condensate tank:
15.5 ltrs (3.4 gals).
Dispersal elements:
2.
Minimum operating capacity:
22.7 ltrs (5.0 gals).
Vacuum (max):
25 In/Hg.

Replacement elements PVS 600 flow diagram

Particulate
2Q (2 micron) 932665Q
5Q (5 micron) 932666Q
10Q (10 micron) 932667Q
20Q (20 micron) 929927Q
Dispersal
Disposable 933180
(coalescing)
Packed tower 933553
(cleanable)
Coreless
02QE 933734Q
05QE 933612Q
10QE 933735Q
20QE 933736Q

148 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 20
 Portable Purification Systems

PVS 1200
Specification

Flow rate: Viscosity (max):

76 lpm (16.7 gpm). 108 cSt (500sus) – disposable.
Height: 460 cSt (2150 sus) – packed
1651mm (65”). tower.
Width: Outlet pressure (max):
1117.6mm (44”). 4.1 bar (60 psi).
Length: Ports:
1549.4mm (61”). 11/2” NPTF inlet.
1” JIC (male) outlet.
Weight:
703.1 kg (1550 lbs). FLA (full load amps):
30-48 amps.
Seal material: (Depending on options
Fluorocarbon (EPR opt.). & voltages).
Condensate tank:
31.4 ltrs (6.9 gals).
Dispersal elements:
4.
Minimum operating capacity:
41.6 ltrs (9.1 gals).
Vacuum (max):
25 In/Hg.

Replacement elements PVS 1200 flow diagram

Dispersal
Disposable 933180
(coalescing)
Packed tower 933553
(cleanable)
Coreless
02QE 933734Q
05QE 933612Q
10QE 933735Q
20QE 933736Q

Portable filtration systems

149
 Portable Purification Systems

PVS 1800
Specification

Flow rate: Minimum operating capacity:

114 lpm (25 gpm). 68.1 ltrs (14.98 gals).
Height: Vacuum (max):
1651mm (65”). 25 In/Hg.
Width: Viscosity (max):
1066.8mm (42”). 108 cSt (500sus) – disposable.
Length: 460 cSt (2150 sus) – packed
1943.1mm (76.5”). tower.
Weight: Outlet pressure (max):
1156.7 kg (2550 lbs). 4.1 bar (60 psi).
Seal material: Ports:
Fluorocarbon (EPR opt.). 2” NPTF inlet.
1.5” JIC (male) outlet.
Condensate tank:
31.4 ltrs (6.9 gals). FLA (full load amps):
40-65 amps @ 460 V/60hz.
Dispersal elements:
8.

Replacement elements
Dispersal
Disposable 933180
(coalescing)
Packed tower 933553 PVS Specification Worksheet - Section 1
(cleanable) Note: The following information will be required before a PVS order can be processed.

Coreless
1. Application..................................................................................................
02QE 933734Q
2. Fluid type......................................... Brand...............................................
05QE 933612Q
Grade .............................................. Specific Gravity ................................
10QE 933735Q
20QE 933736Q 3. Viscosity Min ........................... SUS/cSt @........................... °F/°C
Max........................... SUS/cSt @........................... °F/°C
Normal ...................... SUS/cSt @........................... °F/°C

4. Contamination level Current ISO level ___ /___ /___

Desired PPM level ___ /___ /___

5. Water concentration Current ISO level........................

Desired PPM level......................

6. Suction Head Positive/Negative ......................... Ft./metres....................

7. Operating distance ....................................... Ft./metres .........................

8. System fluid operating temperature: ............................................. °F/°C

Is there a cooler?..........................................................................

9. Operating environment air temperature: (air cooled model)

Min ....................................°F/°C
Max ...................................°F/°C
Normal...............................°F/°C

150 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 20
 Portable Purification Systems

PVS 2700
Specification

Flow rate: Minimum operating capacity:

170 lpm (37.4 gpm). 68.1 ltrs (14.98 gals).
Height: Vacuum (max):
1651mm (65”). 25 In/Hg.
Width: Viscosity (max):
1066.8mm (42”). 108 cSt (500sus) – disposable.
Length: 460 cSt (2150 sus) – packed
1943.1mm (76.5”). tower.
Weight: Outlet pressure (max):
1156.7 kg (2550 lbs). 4.1 bar (60 psi).
Seal material: Ports:
Fluorocarbon (EPR opt.). 3” NPTF inlet.
2” NPTF outlet.
Condensate tank:
31.4 ltrs (6.9 gals). FLA (full load amps):
50-70 amps @ 460 V/60hz.
Dispersal elements:
8.

Replacement elements
Dispersal
Disposable 933180
(coalescing)
Packed tower 933553 PVS Specification Worksheet - Section 2
(cleanable)
10. Water supply temperature: (liquid ring model)
Coreless Min ....................................°F/°C
02QE 933734Q Max ...................................°F/°C
05QE 933612Q Normal...............................°F/°C
10QE 933735Q
11. Operating environment above/below sea level: ........................ Ft./metres
20QE 933736Q
12. Voltage Options: 230Vac, 3p, 60Hz (185,600)
380Vac, 3p, 50Hz (185,600,1200,1800,2700)
460Vac,3p,60Hz (185,600,1200,1800,2700)
575vac, 3p 60Hz (185,600,1200,1800,2700)

13. Available amperage:....................................................................................

14. System volume: ..........................................................................................

15. Special requirements: .................................................................................

...................................................................................................................
...................................................................................................................
16. Any previous filtration problems with application:........................................

17. PVS model selected: ..................................................................................

Specification sheet must be completed before order can be entered

Portable filtration systems

151
 Portable Purification Systems

PVS
Ordering Information

Product configurator
Select the desired symbol (in the correct position) to construct a model code.
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10 Box 11
- PVS 600 460 DS D 5Q - 12 AC DFL

Box 1 Box 2 Box 3 Box 4

Seals Basic assembly Flow rate Power supply
Description Code Description Code Description Code Model Description Code
Fluorocarbon None Portable Purification System PVS 19 lpm (4.2 gpm) 185 380VAC, 3P, 50HZ 380
EPR E8 38 lpm (8.3 gpm) 600 185 460VAC, 3P, 60HZ 460
575VAC, 3P, 60HZ 550
76 lpm (16.7 gpm) 1200
380VAC, 3P, 50HZ 380
114 lpm (25.0 gpm) 1800
600 460VAC, 3P, 60HZ 460
170 lpm (37.4 gpm) 2700 550VAC, 3P, 60HZ 550
380VAC, 3P, 50HZ 380
1200 460VAC, 3P, 60HZ 460
550VAC, 3P, 60HZ 550
380VAC, 3P, 50HZ 380
1800 460VAC, 3P, 60HZ 460
550VAC, 3P, 60HZ 550
380VAC, 3P, 50HZ 380
2700 460VAC, 3P, 60HZ 460
550VAC, 3P, 60HZ 550

Box 5 Box 6 Box 7

Vacuum pump Dispersal element Particulate element µm (c)
Pressure setting Code Description Code Description Code
Dry sealed DS Disposable (coalescing) D 4 micron Microglass III 2Q
Liquid ring LR Packed tower (cleanable – 6 micron Microglass III 5Q
for use with viscious or P
10 micron Microglass III 10Q
highly contaminated fluids)
20 micron Microglass III 20Q
Note: Above elements are rated for Beta 200+ (99.5% efficiency)

Box 8 Box 9 Box 10 Box 11

Filter housing Heater Condenser Options
Description Code Model Description Code Description Code Description Code
80CN-2 None 185 12 KW (3 phase) 12 Air cooled AC Pneumatic wheels PW
IL8 (39”) Ecoglass III upgrade E 12 KW 12 Liquid cooled LC Auto condensate drain ACD
600
24 KW 24
Note: IL8 option is available on 600 models, Dirty filter light DFL
1200 24 KW 24
and is standard on 1200 models and larger Resetable hour meter RHM
1800 36 KW 36
2700 48 KW 48 Sight flow indicator SFI
Inlet control valve ICV
CE marked CE
CSA marked CSA
Explosion proof EXP
(Class I, Division II, Zone I and II)

Note 1: Contact parker for part number profile availability

152 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 20
 Water Removal Filter Elements

Par-Gel

Water removal filter elements

153
 Water Removal Filter Elements

Par-Gel
Par-Gel filter elements are an effective tool in controlling water related problems in
hydraulic power and lubrication systems.
There is more to proper fluid maintenance
than just removing particulate matter. You
need to remove water as well. Parker has
developed Par-Gel water removal elements
to be used in combination with particulate
filters to provide significant benefits.

Less component wear, consequently

less component generated
contaminants.
Significant reduction of costly downtime
and replacement of failed components. .10% Water .03% Water
Increased efficiency of the system, 1000 PPM 300 PPM
thereby improving machine productivity.
Less frequent replacement and disposal
of contaminated fluid.
Reduced chance of catastrophic failure.

Water as a contaminant. Water is everywhere!

Whether you used a mineral-base or synthetic fluid, each Storage and handling. Fluids are constantly exposed to
will have a water saturation point. Above this point, the fluid water and water vapour while being handled and stored. For
cannot dissolve or hold any more water. This excessive water instance, outdoor storage of tanks and drums is common.
is referred to as ‘free’ or emulsified water. As little as .03% Water settles on top of tanks and drums and infiltrates the
(300 ppm) by volume can saturate an hydraulic fluid. container, or is introduced when the container is opened to
Many mineral-base and synthetic fluids, unless specifically add or remove fluid.
filtered or treated in some way, will contain levels of water In-service. Water can get into the system via worn cylinder
above their saturation point. and actuator seals, or through reservoir openings. Water can
come into contact with these entry points through water based
cutting fluids or when water and/or steam are used for cleaning.

154 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 21
Specification

Water in the system creates oxides, slimes and resins.

Corrosion is an obvious by-product and creates further
contaminants in the system.
The effect is compounded, as you now have both particulate
contaminant and water working together.
The particulate contamination can be as simple as rust flaking
from reservoir walls. Anti-wear additives break down in the
presence of water and form acids. The combination of water,
heat and dissimilar metals encourages galvanic action. Pitted
and corroded metal surfaces and finishes result.
Further complications occur as temperature drops and the
fluid has less ability to hold water. As the freeze point is
reached, ice crystals form, adversely affecting total system
function. Operating functions may become slowed or erratic.
Electrical conductivity becomes a problem when water
contamination weakens insulating properties of fluid
(decreases dielectric kV strength).

Testing your fluid for water.

A simple ‘crackle test’ will tell you if there is water in your
fluid. Simply take a metal dish or spoon with a small amount
Condensation is also a prime water source. As fluid cools in of fluid. Apply a flame under the container with a match. If
a reservoir, the temperature drop condenses water vapour on bubbles rise and ‘crackle’ from the point of applied heat, you
interior surfaces, which in turn causes rust. Rust scale in the have free water.
reservoir eventually becomes particulate contamination in the
system.

Microbial growth as a contaminant.

Once water enters a system, growth of micro-organisms
begins. Since water is one of the end products of the
breakdown of hydrocarbon fluid, once started, the process is
somewhat self-sustaining.
Slime is evidence of microbial growth, as is the apparent
increase in viscosity of the fluid, obnoxious odour and
discoloured fluid. The results are: short fluid life, degraded
surface finish and rapid corrosion.

Water generated damage and operating problems. ParTest™ fluid analysis. For complete analysis, Parker offers
Par-Test fluid analysis. Your Parker representative can supply
Corrosion
you with a fluid container, mailing carton and appropriate
Accelerated abrasive wear forms to identify your fluid and its use. An independent lab
Bearing fatigue performs complete spectrometric analysis, particle counts,
Additive breakdown viscosity and water content.
Increased acid level Results are sent directly to the requester.
Visosity variance * Excessive free water must be removed from the system before
Electrical conductivity filtering is attempted. In systems with gross amounts of water (1% to
2% by volume), settling or vacuum dehydration should be considered
Forms of water in fluid
before using Par-Gel filter elements.
Dissolved water – below saturation point
Free water – emulsified or in droplets*.

Water removal filter elements

155
 Water Removal Filter Elements

Par-Gel
Features & Benefits

Removing water. How many filter elements will I need?

Using a Par-Gel water removal element Suppose you would like to remove water from contaminated oil stored in a 750
is an effective way of removing litre tank. The tank is found to have 1000 ppm of water (very contaminated). The
free water contamination from your circulation rate will be 40 Ipm for the 40cSt fluid.
hydraulic system. It is highly effective at
Example: How many single length Modulflow™ elements will be needed to reduce
removing free water from mineral-base
the water to normal saturation levels. To find the answer, use the conversion charts
and synthetic fluids.
and capacity curves for the Modulflow element.
The Par-Gel filter media is a highly
1. 1000 ppm start – 300 ppm finish = 700 ppm removed
absorbent copolymer laminate with an
affinity for water. However, hydraulic or 2. 700 ppm water x 0.001 = .07%
lubrication fluid passes freely through .07% x 750 litres = 0.53 litres water total
it and the water is bonded to the filter
3. Use the capacity curve for Modulflow element P/N 927584.
media.
Capacity = 80cc at 40cSt & 40 Ipm to pressure drop of 1.7 bar.
(See graph below)
80cc x 0.0001 Ipm = 0.076 Ipm/element
CC
4. 0.53 litres total water = 7 elements*
0.076 Ipm/element

* The replacement value of this fluid may range from €1500.00 to €4500.00 (€0.50 to €1.25 litre).
An estimated element cost of €150.00 each, the saving could be as much as €3000.00!

Using Par-Gel filter elements saves money in fluid and replacement component
Photo above shows ‘dry’ Par-Gel filter costs. Also, the frequency of fluid disposal and the problems associated with it are
media and the same media swollen with greatly reduced.
absorbed water.
Filter capacity. There are no accepted and approved water capacity testing or
Parker technology and expertise at reporting standards. Consequently, there is virtually no way to compare one element
your disposal. capacity with another. It is also difficult to simulate a specific application in testing...
making it hard to predict field performance.
Choosing the correct filters can save
money and minimise problems caused Why the discrepancies? Water removal media capacity is the result of the interplay of
by particulate and water contaminants four variables: flow rate, viscosity, bypass setting and the media itself.
in hydraulic and lubricating fluids. Here’s an example: two identical elements, testing the same fluid, varying only the
Parker provides hard data and advice flow rate.
on choosing from a wide range of filter Element A Element A’
configurations, flow patterns and flow Flow rate: 11 Ipm 38 Ipm
pressure capabilities. Viscosity: 15 cSt 15 cSt
Test capacity: 425 ml 360 ml

80CN-1/80CN-2 This is a 15% reduction in capacity, due to changing only the flow rate! Now, look at
525 what happens when the test flow rate is the same and the viscosity is changed.
Element B Element B’
450 Flow rate: 76 Ipm 76 Ipm
Viscosity: 40 cSt 15 cSt
Capacity (CC)

375
Test capacity: 250 ml 550 ml
300
Twice the capacity can be achieved just by manipulating the test viscosity!
16cSt
225
16cSt Naturally, having a lower bypass valve setting limits the capacity. Since the life of
150 the element is measured in pressure drop, using higher bypass valve settings will
43cSt increase apparent life (all other conditions equal).
75 43cSt
We recommend 1.7 bar bypass valves to get adequate life from Par-Gel filter elements.
0
0 38 76 113 150 190 Capacity also depends on the media itself. That’s why Parker spent two years
Flow l/min researching the media used in Par-Gel filter elements. We tested all known media,
and worked closely with our suppliers to achieve maximum water absorbency.

156 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 21
Specification

How we report: Add it all up.

Our goal is to give our customers usable data. Why show test Broad selection, competitive prices, off-the-shelf availability,
results at a lower viscosity (13cSt for example), if the typical on-time delivery, high-efficiency filter media, reduced system
application uses 41cSt fluid? So, we report at 41cSt to give contaminant and longer component life. When you add it all
typical field application capacity, and 15cSt for competitive up, we think you’ll agree...
comparisons. But keep in mind when comparing, you still
have to consider flow rate. Conversion Factors

If you have: Multiply by: To get:

What it all means:
mg/l 0.00009 %
You deserve to know how an element will work for you in your
ppm 0.0001 %
applications. So, we test and report our data in such a way
ml 1.0 cc
that it helps you predict element performance and life.
gallons 4.54 litres
Be wary of claims that say... “this element holds one litre
(or 5 litres) of water”. What was the test flow rate? fluid
viscosity? bypass valve setting? Was it run as a ‘single pass’ Typical Saturation Points
or ‘multipass’ test?
Fluid type PPM %
Rely on Parker to give you the facts and data you need. Our
goal is to better protect your systems and components...and Hydraulic 300 0.03
we start up-front by telling you what you need to know. Lubrication 400 0.04
Transformer 50 0.005
Is there any other way to do business?

Parker Par-Gel water removal filter elements are available in these standard Parker filter housings:

Fluid model series Length Element part number

40CN-1 Single 931412
40CN-2 Double 931414
80CN-1 Single 931416
80CN-2 Double 931418
Guardian ®
Single 932019
Moduflow RF 2-1 (10MF) Single 927584

Ideal Applications for Par-Gel filter elements

Guardian® Portable Filtration System Filtration Trolley

Water removal filter elements

157
 FMU p-Indicators and Pressure Indicators

Indicators Series MAX 420 bar

Filter indicators
159
 FMU p-Indicators

Indicators Series
Features & Benefits

Features Advantages Benefits

Indicators fatigue tested to full Reliable indicators for heavy duty applications Reliable and continuous control of the
pressure rating filter in all applications
Cartridge screw-in type indicators Easy mounting Reliable sealing, no leakage
Visual, electrical and electronic Check element condition at a glance Optimises element life, prevents bypassing
indicators available Right style for the application Match your system’s electrical connections
Several indication settings Optimized for each bypass setting Right indicator for application
Visual indicators Local monitoring of the element condition Reliable low cost indicator
Electrical indicator with Option of Normally Open (N.0.) and Normally Approved for low voltage and high
change-over switch Closed (N.C.) function voltage use including machine control
systems and PLC’s
Electrical indicator with 4 LEDs Thermal lock-out No false alarm because of low
temperature oil
Visual early warning with yellow LED Allows time to schedule element change
Pre-alarm with yellow LED and wired output Indicates upcoming element change
Alarm with red LED and wired output Clear indication for element change
Programmable and ATEX certified Right indicators for special applications Improved machine surveillance
indicators available

Typical Applications

Industrial equipment
Mobile equipment
Marine/offshore applications

The Parker FMU Series

Differential Pressure Indicators
The FMU range of filter condition indicators, are
designed for use on a wide range of Parker filters
and suitable for competitive interchange (consult
Parker Filtration for details).
Ideal for giving accurate visual, electronic or electrical
feedback of filter element condition, in order to
facilitate effective maintenance and ensuring
hydraulic systems, marine/mobile or industrial are
protected from particulate contamination.

160 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 22
Specification

Maximum operating pressure: The differential pressure values of

420 bar (250 bar for aluminium). standard indicator models:
Maximum differential pressure: 1.2 bar ± 0.2
210 bar. 1.5 bar ± 0.2
2.5 bar ± 0.3
Working temperature range: 5.0 bar ± 0.5
-20˚C to +85˚C. 7.0 bar ± 0.5
Material of housing: 8.5 bar ± 0.5
Brass, aluminium or stainless steel. (Indicators for other differential pressure values are optional).
Seals:
Fluoroelastomer, Nitrile or EPDM.
Mounting torque:
max. 75 Nm
(max. 50 Nm for aluminium indicator body & filter housing)

FMU p – Indicators are typically used with the following filters:

Marine filters: 2020, 2035, 2040, 2045, 2060, 2065, 2070, 2110 and 2520. U12H 1.5 bar
Types: 2035, 2040, 2045 and 2060 require FMU-Block for connecting indicator to the filter.
Medium pressure filters series: 45M and 130M.
U12H 2.5 bar
High pressure filters series: 70L, 70T, 70B, 5000, 7100 and 7200.
High pressure filters without bypass valve: 70L, 70T, 70B, 7100 and 7200. U12H 7.0 bar
Medium and low pressure filter series;
Note for PD Range only 2.5 bar indicators are available U14M 1.2 and 2.5 bar
15CN, 40CN, 80CN, 22PD, 32PD, 15P, 30P, 40RF, 50RF, IL8, 12M, 22M, 16P, 26P, 36P
High pressure filters 18P, 28P, 38P, FDA, FDB U14H 2.5 and 5.0 bar

Filter indicators
161
 FMU p-Indicators

Indicators Series
FMUT Electrical

U12H model
Contact configuration U12H model
P1-P2

U12H U14M U14H

Rotating part 360° A 98 105 105
B 27.5 32 32
C Ø16.2 Ø19.78 Ø18.83
±0.05 ± 0.06 ± 0.06

rt
pa
No D 3/4-16 7/8-14 7/8-14

ed
connect

Fix
UNF-2A UNF-2A UNF-2A

A
Normally closed (N.C)
Indication (N.O)

P1 high pressure

B
COM

P2 low pressure C
D U14M model U14H model
Pin 2 3 1

Enclosure class IP65

Electrical connector DIN 43650
Overvoltage category II (EN61010-1)

Contact configuration U14M & U14H

B
P1-P2 P2 low pressure

C P1 high pressure
C
No D D
connect
Non-inductive load (A) Inductive load (A) Inrush
Resistive Lamp Inductive Motor current
Rated load load load load (A)
Normally closed (N.C)

Normally open (N.O)

voltage
N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O.
125Vac 5 1.5 0.7 3 2.5 1.3
250Vac 3 1.0 0.5 2 1.5 0.8
COM

8Vdc 5 2 5 4 3
14Vdc 5 20 10
Pin 1 3 2 2 4 4 3
30Vdc 4 max. max.
2 3 3 3
125Vdc 0.4 0.05 0.4 0.4 0.05
250Vdc 0.2 0.03 0.2 0.2 0.03

FMUM3 Visual Auto Reset/FMUM1 Visual Manual Reset

Red colour
visible when
U14M model indicator on U14H model
Operation U12H model M1-type push Operation
here for reset
ø24
Red colour
visible when
indicator on
60
32

Note: Only FPUM3

visual auto reset available
55.5

Low pressure for models U14M and

High pressure U14H. FMUM1 not
27.5

available.
High pressure

/ - 14UNF - 2A
7 8 / - 14UNF - 2A
7 8
Low pressure
/ -16 UNF-2A
3 4
ø19.78 +
- 0.06
ø18.83 +-0.06

162 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 22
FMUF Electronic
Contact configuration U12H model

NPN

3 +V
FMU F
NPN +10...36 Vdc Rotating part 360° U12H U14M U14H
1 Load
A 98 105 105
2 Load B 27.5 32 32
0V
C Ø16.2 Ø19.78 Ø18.83
4
max 300 mA Green LED ±0.05 ± 0.06 ± 0.06

rt
pa
Yellow LED’s D 3/4-16 7/8-14 7/8-14

A
ed
UNF-2A UNF-2A UNF-2A

Fix
PNP Red LED

3 +V
FMU F
PNP +10...36 Vdc High pressure
1 Load

B
2 Load

4 0V Low pressure C
max 300 mA D U14M model U14H model

Thermal lock-out (standard setting +20°C)

Indicator operates only when temperature is above setting.
Green LED is blinking if temperature is lower. (not in U12H)
Ind. press. LED status Output
setting G Y1 Y2 R

B
50% –
Low pressure
75% 2 active
100% 1 active

Enclosure class IP65 High pressure

C C
Electrical connector DIN 43650, cable connection PG9 or optinally M12 4-pin
Input supply voltage +10 to 36 Vdc D D
*Indication output max. 300 mA/36 Vdc
Output type: N.O. or N.C./NPN or PNP

Note: Do not connect output terminals 1 or 2 directly (without load) to power Safety feature: The 250 bar U14M indicator does not fit into the U14H cavity,
supply terminals, because this will damage the equipment. which is used in 420 bar filters

FMUL1 Programmable

Programmable p-indicator
All settings adjustable (settings made via PC) Connections cable and software
available from Parker
• 4 LEDs giving visual indication:
• Green (G): Power ON
• Yellow 1 (Y1): Pre-alarm 1 (presetting 50%)
• Yellow 2 (Y2): Pre-alarm 2 (presetting 75%)
• Red (R): Indication (presetting 100%)
• two independently programmable indication outputs
• can be set independently from each other and LED setting
• output type: NPN or PNP
• switching type: N.O. or N.C.
• setting range: 0,5 ... 10 bar
• thermal lock-out range: 0 ... 100°C
• includes a microchip with memory logs
• number of alarms: max 65535
• time indication on (output 1): max 1092 hours
Dimensions: see FMUF electronic p-indicator • time power on (running hours): max 7 1/2 years
• upload and reset via PC

Filter indicators
163
 FMU p-Indicators

Indicators Series
Ordering Information

Product configurator
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
FMU M3 K V M U14 H

Box 1
Code
Indicator series Code
Filter monitoring unit FMU

Box 2 Box 3
Filter type Indicator setting
Differential pressure indicator Code Indicator setting Standard Code
Visual manual reset M1* 1.0 bar (14 psi) c F
Visual autoreset M3 1.2 bar (17 psi) a G
Electrical T1 1.5 bar (21 psi) c H
Electronic 4 LED, PNP, N.O. F1 2.5 bar (35 psi) a, b, c K
Electronic 4 LED, NPN, N.O. F2 5.0 bar (70 psi) b M
Electronic 4 LED, PNP, N.C. F3 7.0 bar (98 psi) c N
Electronic 4 LED, NPN, N.C. F4 8.5 bar (125 psi) P
Programmable with memory logs L1 Standard settings:
Ex version X1 a: U14M, former -W3
* available only with U12 thread b: U14H, former -W6
c: U12H, former -F6

Box 4 Box 5 Box 6

Seal type Indicator body Thread connection
Seal material Code Indicator body Code Thread connection Code
Nitrile B Aluminium (Box 7, code M) A 3
/4" - 16UNF-2A U12
Fluoroelastomer V Brass (Box 7, code H) M 7
/8" - 14UNF-2A U14
EPDM E Stainless steel R
Neopren N

Box 7 Box 8
Max Pressure Options
Max pressure Code Options Code
Medium pressure housings (<250 bar) M Standard omit
High pressure housings (<420 bar) H Other options factory supplied
Note: F and L type indicators. Non-standard thermal
lockout settings shown here.

Indicator type X1: ATEX p-indicator

Electronic indicator accordant with ATEX 94/9/EC directive: (Ex) II 2 GD Eex mII T6.
Degree of protection IP66. For details contact Parker Filtration.

Connection cable + software for programmable indicator L1

Connection cable for PC serial connection and software for indicator settings and utilising memory logs.
Ordering Code: 905075030

Seal kits (fluroelastomer) Ordering code

Indicators with thread connection U12H (former -F6) 911045078
Indicators with thread connection U14M (former -W3) 911045086
Indicators with thread connection U14H (former -W6) 911045087

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

164 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 22
Pressure Indicators for Low Pressure Filters

ETF Filter
Visual pressure indicator 48 Vdc electrical indicator 1.2 bar 250 VAC electrical indicator 1.2 bar
Code G2 Code S2/S3 Code S4
mm (inches) mm (inches) mm (inches)
38
31 Rotating
part 360° (1.49)
(1.22)
G1/8

30 (1.18) x30 (1.18)

67
(2.64) 74
(1.57)
40

2 NO

44 (1.73)
C3 (2.91)
HEX 24 56 1 NC
(0.94) (2.20)

32 10 (0.39)
(1.26) 10
(0.39) G /8K1

HEX 27
(1.06) Fixed part
G1/8K

Option Description Connection/Voltage Wiring Part number

G2 Visual indicator N/A N/A FMUG2FBMG02L
1.2 bar

FMUS2FBMG02L Normally open contacts

Electrical indicator 42 Vdc (NO switch)
S2/S3 or
1.2 bar max Select either normally open (NO) FMUS3FBMG02L
or normally closed (NC) (NC switch)
S4 1 NC Normally closed contacts
Electrical indicator 250 Vac
2 NO FMUS4FBMG02L
1.2 bar max
3 C

TTF, BGT and TPR

Indicator PS pressure switch Indicator PS NO/NC pressure switch
Protective cap Protective cover
with dual cable duct
for 1, 7-2, 3mm diameter cable
Normally open contacts

2 3
Amp 6.3x8
terminals
1 Normally closed contacts
Switch
74
75

55

1 = COM.
2 = N.C. 24 A/F
58

3 = N.O.
27 A/F
9
9

M10x1 G1/8 (BSP)

Ø30.5 M10x1 Ø28

Specifications Specifications
Elec.rating 42V / 4A Elec.rating 42V / 2A Visual indicator 1.2 bar
Thread connection M10x1 Thread connection G1/8 M10: code FMUG1EBPM10L
Elec.connection AMP 6.3x0.8 terminals + protective cap Elec.connection AMP terminal 6.3x0.8 G1/8: code FMUG2EBPG02L
Protection IP65 (with cap) terminals IP00 Protection IP65 (terminal IP00)
Code FMUS1EBMM10L (Switch) Switch type NO or NC
Visual indicator 1.2 bar Code FMUS2EBMG02L (NO switch)
M10: code FMUS1EBMM10L FMUS3EBMG02L (NC switch)
G1/8: code FMUS4EBMG02L
Filter indicators
165
 Finding design
solutions
for reservoir
requirements
Parker’s Filter Division Europe manufactures
innovative, lightweight co-polymer reservoirs,
that can feature an integrated, patented and
environmentally friendly LEIF® filter element
and an ecological air filter. Ideally suited for
mobile hydraulic systems, such as forklift
trucks, telescopic handlers and agricultural
sprayers, the all-in-one design of the reservoir
means that it can be specified as a complete
unit, helping mobile equipment manufacturers
to cut costs, save time and increase efficiency.

The environmentally friendly LEIF® (Low Environmental

Impact Filter) element has been designed to allow the
outer metal filter sleeve to be re-used. As a result, only
the contaminated filter medium has to be disposed
of as chemical waste, helping to reduce disposal and
processing costs by as much as 50%.

Connection points for support devices, such as

suction pumps, drains or filler openings, can be easily
incorporated into the lightweight reservoir, with metal
connectors being available for hose couplings, and
flange or thread attachments. Each metal connector is
moulded into the co-polymer reservoir wall, ensuring
a reliable, leak-proof connection between the reservoir
and ancillary components. In addition, an oil level
indicator can be fully integrated into the design,
eliminating the need for level glasses, which are fragile
and a potential source of leakage if mounted incorrectly.

The dimensions, shape and design of the lightweight

reservoir can be fully adapted to meet the specific needs
of each customer, with each reservoir being specified as
a single unit. This can help OEMs to reduce inventory,
assembly and maintenance costs.

The co-polymer reservoir forms part of a product

family comprising filters and filtration products, which
have been designed to combine exceptional levels
of performance and reliability in robust, virtually zero
maintenance units.

166
 Hydraulic Reservoir Solutions

Co-Polymer
and Steel Reservoirs

EN
RE
G ING ®
F
VE R
TI TU

I
VA EA
NO F

E
IN TER
N
A FIL

Reservoir equipment
167
 Hydraulic Reservoir Solutions

Co-Polymer & Steel Reservoirs

Features & Benefits

Parker hydraulic tank solutions are applied to Both tank types can typically represent a significant
contribution to cost savings. Because of the differing features
a wide variety of markets
and benefits between the metal and co-polymer tanks, Parker
Hyd. & lube oil filtration Co-polymer tanks Steel tanks
is able to offer customers the most appropriate tank concept
Agriculture X X to meet their specific requirements.
Construction equipment X X
Marine X Saving costs with complete Parker Hydraulic Tank
Material handling X Solutions
Mining X • A partnership in supply chain management reduces costs
Road building equipment X X • An integration of reservoir functions
Transportation X X • Reduction of component parts
Waste management / • Integrated hydraulic filter and air filter benefits
Environmental control X X
• Integrated oil level measurement benefits
• Standard & customised solutions offered
An introduction to Parker Hydraulic Reservoir Solutions
• Flexibility related to shape & dimension of each tank
Parker’s experience in designing fluid power equipment
will help a system designer to save costs at every stage of • Leak-proof connections
hydraulic system development. • Patented element for guaranteed quality filtration
Original Equipment
Manufacturers are
continually looking to
reduce manufacturing costs
and increase operating
efficiency and it’s here that
Parker Hannifin’s European
Filtration Division offers
complete solutions. Beside
high quality steel tanks
designed and supplied by
Parker and featured in this
brochure, Parker also designs
and supplies revolutionary,
lightweight co-polymer
reservoirs with tank top
mounted or integrated filter and
tank air filter options.
Steel tank example
Co-polymer tank example

Typical Applications
Unique tank solutions designed to meet customer needs
Parker designs and supplies both co-polymer and steel reservoirs.
Today Parker steel tank solutions are typically applied to
commercial vehicle applications for example waste management
and the transportation market. Customers manufacturing hook-
arm systems, truck manufacturing or vehicle body builders are
further examples of potential customers for a complete steel tank
assembly. with the courtesy
of Grove
A more common use of co-polymer tanks can be seen in materials
handling equipment, agricultural and construction equipment
markets. Typical applications are warehouse trucks, smaller sized
wheeled loaders, telescopic handlers, dumpers, mini excavators
and agricultural machinery.

168 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 23
Specifications

Product Architecture

Type of tank Filters & accessories

customised On request
steel tank

Co-polymer tank with integrated

customised IN-AGB with integrated breather filter & air filter
co-polymer TPR I and II
tank SR I and II series
Steel or
co-polymer
tank
Tank air filter
IP65 compact series
ABL series thread mounted
EAB series flange mounted
Standard
steel tank
ETF
TTF Steel tank with
SR I and II integrated options
TPR I and II

Design aspects Co-polymer reservoir Steel reservoir

Complicated shapes X
Styling of reservoir meets
overall styling of vehicle X
Weight reduction X
Long-term temperatures (depends of
Tmin< -30°C or material properties) X
Tmax> +120°C
High mechanical load on tank
(tank contributes to strength of chassis) X
All-in-one concept X
High level of tank
Example of co-polymer tank with top mounted filters and air filters Pressurisation X
Suitable for heavy duty
equipment X X

Design note: All customised tanks are engineered solutions based on

detailed analysis of customer requirements and specifications.
Detailed knowledge of co-polymer materials, implies that customised
materials can be made available to meet specific demands. Depending
on technical and commercial requirements, Parker is able to advise
each customer individually, about the most suitable and economical
reservoir solution, made from co-polymer or steel.

Reservoir equipment
169
 Hydraulic Reservoir Solutions

Co-Polymer Reservoirs
Features, Benefits & Specifications

Where a tailormade tank design is the solution

The lightweight co-polymer tank is an all-in-one solution that
keeps in mind a customer’s specific design requirements.
Each tank is unique in terms of shape, dimensions and
integrated functions. It is equipped with an integrated tank
top mounted return line filter and tank air filter. All filters
and air filters are supplied as standard with the patented,
environmentally friendly LEIF® element.

Reliable connections
Reliable, leak-proof connections have always been a critical
aspect for co-polymer tanks. Parker has developed a
technology using metal attachment components. All metal
attachment components are moulded in with the co-polymer
tank wall, ensuring a reliable, leak-proof connection between Customised integrated metal attachment
the tank and the components that are attached to it. “Tank also features integrated level measurement”

Level measurement
Oil level indication can be fully integrated into the tank design.
This feature eliminates the need for level glasses, which are
fragile and an additional potential source of leakage when
mounted incorrectly.

Parker Filtration has designed high tech sealing solutions for tank top
mounted filters.

These attached connections (e.g. a suction connection

for pumps, drains, vents, or a filler opening) can easily be
achieved, as well as providing indications for minimum and
maximum oil levels. Metal attachment connections can be
made available for hose couplings, a flange attachment or
thread attachment.
Co-polymer reservoirs are designed to meet the stringent
demands of our customers. All relevant aspects are analysed,
from material properties and operational conditions to dynamic
load and requirements for equipment servicing.

Example of customised co-polymer tank

170 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 23
Features, Benefits & Specifications

Integrated air breather

(with optional water removal media)

Air flow through air breather labyrinth

Return line connection

Integrated return line filter type IN-AGB filter has

In-to-Out flow direction
Pressure gauge or switch

Oil level indication

Example of a customised tank with an integrated return line filter and air filter

The ultimate all-in-one design LEIF® elements:

A more frequent use of co-polymer tanks located on • Environmentally friendly filtration
the outside of mobile equipment often results in specific • Re-usable steel element sleeve
requirements relating to styling. • Patented elements result in guaranteed quality of filtration
• Saves element disposal costs typically by up to 50%
Despite the compact design of Parker tank top mounted filters
• Supports ISO 14001 certification
and air filters, these parts can influence aspects related to
styling or cabin accessibility.
This concept is ideal for applications where space is at a
premium.
Parker Filtration’s unique all-in-one design, where the return
line filter and air filter are both located under one cover is a
concept that offers great possibilities related to tank styling.
The high quality of the co-polymer material ensures a long-
term stability of the chosen colour.
This all-in-one design features the IN-AGB type return line
and integrated air filter with labyrinth. The labyrinth prevents
oil leakage through the air filter. The connection(s) for return
line(s) and filler port are integrated in the tank. This avoids
having to have hydraulic hoses placed on top of the tank.

Environmentally friendly
IN-AGB with LEIF® element
Parker considers care for the environment as a social
obligation. The environmentally friendly LEIF® element (Low
Environmental Impact Filter) is applied to the return line filters Cost-effective
and breathers type ABL and EAB. The advantages of this co-polymer concept are obvious:

What makes this element so special is that the metal sleeve • Lightweight
can be re-used. As a result, this filter element component no • Flexibility with respect to tank shapes
longer ends up in the waste disposal; only the contaminated • Characteristics of plastic material can be customised to
filter medium is disposed of as chemical waste. With LEIF® meet specific requirements
filter elements, the disposal and processing cost may be • Integration of several functions limits the use of individual
reduced by as much as 50%. components
• The tank can be purchased and supplied as a complete unit
The LEIF® concept safeguards the use of genuine Parker parts.

Reservoir equipment
171
 Hydraulic Reservoir Solutions

Steel Reservoirs
Features, Benefits & Specifications

Parker steel reservoirs designed to withstand extreme Diverse tank size options are available
conditions With space at a premium in most truck chassis configurations
Standard steel tanks are often specified for commercial and the need to deal with toolboxes, compressed air
vehicle side mounting. Parker steel tanks are built to last in reservoirs and other equipment, tank dimensions are always
extreme conditions. Extreme weather conditions and heavy an issue. To meet the specific environment requirements
duty vehicle movements can be resisted by our tank design. Parker Filtration offers several tank sizes.
Steel tanks are fully equipped. Our customers can choose from
Quality design a wide choice of filter options. Parker considers care for the
As with co-polymer tanks, steel tanks offer leak proof environment. The environmentally friendly LEIF® element is also
connections and are vigorously tested against leakage. applied to steel tank solutions. Additionally, Parker steel reservoirs
Additionally, they are painted with primer and topcoat to are equipped with an efficient air filter, a level gauge, plugs, a
ensure maximum protection against corrosion. suction kit and mounting brackets. The level gauge can be re-
located on the other side of the tank if user visibility is an issue.
To help reduce dirt
build- up, our
steel tanks are Technical data steel tanks
designed Material: 2mm steel plate applied for standard reservoirs
with smooth
Suction connection: Suction connections at the back and the
corners and the
bottom of the tank swivel type nominal size 2”, 21/2” and 3”.
upper front part
of the tank can Air filter: Ref. product selection for types:
be sloped IP65
which offers ABL
extra benefits: EAB
• Easier Tank top mounted return filter
service TTF
access for ETF
the filter and Tanktopper I & II (with integrated air breather)
tank air filter SR series (Suction & Return filters)
Steel tank with Tanktopper II filter
Support frame and fasteners
Included as standard
Holes must be drilled into the plate 160 x 280mm for
• Dirt, water, snow and ice will not adhere to the tank surface
attachment to the frame for standard steel reservoir
next to the breather and filter
Suction port(s), covered with anti-vortex plate(s), allow low oil
levels giving the operator an increased operational capacity.
Before delivery the steel tanks are thoroughly washed inside
and ready for system assembly.

Steel tank with with customised chassis mounting straps Detailed sectional view of Tanktopper II with integrated air filter

172 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 23
Ordering Information

Product configurator
Configurator examples SR filter
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7
S 075 R S TTF3 10Ql E10

Box 1 Box 2
Tank type Tank volume
Material Code Operating volume (L) Gross volume (L) HxDxW Code
Steel (standard tank shape) S 70 89 500 x 650 x 300 075
Steel (customised tank design) on request 90 113 500 x 650 x 425 100
Aluminium (customised tank design) on request 125 163 500 x 650 x 620 150
Co-polymer (customised tank design) on request 160 208 500 x 650 x 795 200
215 275 500 x 650 x 975 250

Box 3 Box 4
Level glass Suction port options
Location Code Suction port connections Code
Right hand side R Swivel type 42mm (nominal 2") N (on request)
Left hand side L Swivel type 55mm (nominal 2 1/2") W (on request)
Swivel type SAE 3" S (standard)
G2" - Female BSP (ISO 228) on request
G2 1/2" - Female BSP (ISO 228) on request
G2" - Female ball valve (manual operated) on request
G2 1/2" - Female ball valve (manual operated) on request

Box 5 Box 6
Filter model Other filter sizes are available
Filter Qmax Code Recommended tank size Media code
ETF310QBP2FG164 90 ETF3 Code 075 and 100 10Q
TTF310QLBP2EG121 90 TTF3 Code 075 and 100 10QL
TTF610QLBP2EG203 170 TTF6 Code 150 and larger 10QL
TPR210QLBP2EG12L 80 TPR2 Code 075 and 100 10QL
TPR710QLBP2E2G241 250 TPR7 Code 150 and larger 10QL
SRL1210QLBPGG161 130 SRL1 Code 075 and 100 10QL
SRL2210QLBPGG201 250 SRL2 Code 150 and larger 10QL
Note: Refer to the relevant product information to compose the required filter configuration.

Box 7
Tank air filter Degree of filtration
Breather type Code Average filtration beta ratio ß (ISO 16889) / particle size µm [c] Media
IP65 Breather (AB98610101) IP65 ßx(c)=2 ßx(c)=10 ßx(c)=75 ßx(c)=100 ßx(c)=200 ßx(c)=1000
Flange mounted style (compact design)
code
% efficiency, based on the above beta ratio (ßx)
EAB10 (EAB10P020HC73) E10 50.0% 90.0% 98.7% 99.0% 99.5% 99.9%
EAB20 (EAB20P020HC73) E20 N/A N/A N/A N/A N/A 4.5 02Q/02QL
Anti splash style filter (threaded connection) N/A N/A 4.5 5 6 7 05Q/05QL
ABL1 ABL1G114QXWL3) ABL1 N/A 6 8.5 9 10 12 10Q/10QL
ABL2 (ABL2G114QXWL13V) ABL2 6 11 17 18 20 22 20Q/20QL
Note: filter codes are based on B(c)10≥200 glass fibre elements other
degrees of filtration are standard available.

Highlights Key (Denotes part number availability)

123 Item is standard
123 Item is standard green option
123 Item is semi standard
123 Item is non standard
Note: Standard items are in stock, semi standard items are available within four weeks

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir equipment
173
Notes

174 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Reservoir Equipment

Environmental Air Filters

Reservoir equipment
175
 Reservoir Equipment

EAB Series
Typical Applications

Agricultural machines
Articulated dump trucks
Forestry equipment
Wheeled loaders
Lubricating systems
Excavators
Mobile cranes
Industrial power units

Technical Data
The filter has been designed to achieve a low pressure drop and high Options:
dirt holding capacity with airflows up to 1500 l/min. A compact EAB10 Visual gauge type vacuum/pressure indicator.
with airflows up to 1000 l/min is also available. Overpressure valve, pressure setting 0.2 bar.
Construction: EAB10 cannot be specified with an overpressure valve and vacuum/
Glass reinforced composite housing with Eco-element. pressure gauge at the same time.
Filter media options: Advantages of the EAB filters:
P020: High quality polyester media. 2µm (abs). Easy maintenance.
C015: Polyester media with water-resistant layer. 1.5µm (abs) Indicator states the need for element change.
Q010: Glass fibre media. 1.0µm (abs) Quick and easy element change (no tools required).
Mounting options: Environmentally friendly:
With 6 screws. Includes machine and plate screws, a strainer and EAB elements contains no metal parts: therefore it can be crushed
gaskets. and burned minimising the volume of waste material.
External threads G3/4”, G1”. Other features:
Internal thread G3/4”. The optional indicator is located in a safe place inside the housing.
Housing includes mounting holes for a padlock, which allows you to
increase the security against theft and vandalism.
Pressure Drop Curves
p total = p housing + p element. The recommended level of the initial pressure drop for this filter is max 0.02 bar (2.0 kPa).

EAB10 Housing Only EAB10 Elements

10 4
9
GE12
8
3
7
Δp (kPa)

Δp (kPa)

6
5
GE16 2
4
C015
3 Q010
HC73 1
2
1 P020
0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 0 200 400 600 800 1000 1200 1400 1600 1800 2000
Flow (l/min) Flow (l/min)

EAB20 Housing Only EAB20 Elements

10 4
9
8
GE12 3
7
Δp (kPa)

Δp (kPa)

6
5 2
GE16
4 C015
3
1
2 Q010
HC73
1 P020
0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 0 200 400 600 800 1000 1200 1400 1600 1800 2000
Flow (l/min) Flow (l/min)

176 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 24
Specification

EAB10 EAB20
Optional indicator Ø114
Ø114
Optional indicator

Holes for locking

68

102
Holes for locking

Air flow Air flow

25

Q = 1000 l/min Q = 1500 l/min

43
max max
Optional overpressure valve
* Optional mounting holes
Ø73 Ø90
* Optional mounting holes
G3/4 Ø73 Ø90
G3/4 or G1 G/3 4
* Strainer
G3/4 or G1
* Strainer
* Gasket
* Gasket
94

94

* Comes with HC73

* Comes with HC73
Ø50 Ø50

6 x 60° Ø4 or M5
NOTICE!
6 hole fixing mounting Mounting Code

Air filters are an essential dimensions 6 mounting holes HC73

G1 external GE16
part of the system and G3/4 external GE12
G3/4 internal GS12
the element needs to be 55
73
replaced regularly.

Reservoir equipment
177
 Reservoir Equipment

EAB Series
Ordering Information

Standard products table

Part number Supersedes Model Media Mounting Overpressure Indicator Replacement
valve elements
EAB20P020HC73V2 EAB20P020HC73-V2 EAB20 P020 HC73 V2 EAC20P020
EAB10P020HC73 N/A EAB10 P020 HC73 EAC10P020
EAB20P020HC73 N/A EAB20 P020 HC73 EAC20P020
EAB20P020GE16 N/A EAB20 P020 GE16 EAC20P020
EAB20P020HC73A EAB20P020HC73-A EAB20 P020 HC73 A EAC20P020

Product configurator
Product number Media options Mounting options Overpressure valve options Indicator options

EAB20 P020 2µ abs polyester HC73 6 hole fixing No overpressure valve No indicator

G3/4 external Vacuum/pressure

EAB10 C015 1.5µ abs water resistant GE12 V2 0.2 bar A
thread gauge
G1 external thread
Q010 1.0µ abs glass fibre GE16
G3/4 internal
thread
GS12
M33 x 2 external
thread
ME33

Replacement elements
Product number Media options

EAC20 P020 2µ abs polyester

EAC10 C015 1.5µ abs water resistant

Q010 1.0µ abs glass fibre

Note 1: Part numbers featured with bold highlighted codes will

ensure a ‘standard’ product selection.
Note 2: For alternative part number options, consult Parker Filtration.

178 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 24
 Reservoir Equipment

ABL Series
Typical Applications

The Parker Filtration ABL-1 and ABL-2 Series Air Filters.

Saw mills
Agricultural machines
Articulated dump trucks
Forestry equipment
Wheeled loaders
Lubricating systems
Excavators
Industrial power units
Mobile cranes

Technical Data

Assembly: Vacuum indicator:

Tank top mounted. ABL-1 on request only, ABL-2 0.04 bar. Visual with latch out
Connections: memory.
Threads G11/4 (ISO 228), 11/2” (UN-16-2B). Breather housing:
Seal material: High impact strength composite.
Seals integrated in LEIF® element. Filter element:
Operating temperature range: LEIF® element.
-20° to +80°C. Options:
Filtration media: • Adaptor with filter connection.
3 micron. • Single adaptor.
• Breather with integrated pressure relieve valve for pressurised
Flow fatigue characteristics: tank on request only.
Filter media is supported so that the optimal fatigue life is achieved. LEIF® elements can be used for hydraulic fluids and HEES type fluids
only. For other fluids contact Parker Filtration.

Pressure Drop Curves

ABL1 ABL2
Flow (US GPM) Flow (US GPM)

0 79 159 238 317 396 0 132 264 396 528 660

25 36.3 25 36.3

20 29 20 29
Δp (PSID)
Δp (mbar)

Δp (PSID)
Δp (mbar)

15 21.8 15 21.8

10 14.5 10 14.5

5 7.3 5 7.3

0 0 0 0
0 150 300 450 600 750 900 1050 1200 1350 1500 0 500 1000 1500 2000 2500
Flow (l/min) Flow (l/min)

Reservoir equipment
179
 Reservoir Equipment

ABL Series
Specification

ABL-1 ABL-2
indicator)
15 (no

35.5
4
(35.5)

3 NOTICE!
3 Air filters are an
2
essential part of
2
the system and the
105

element needs to be

163
1
replaced regularly.
1
25

Top view
Top view

25
ISO 228-G11/4
Optional: 11/2-16UN-2B
46 A/F
11/2-16UN-2B
Ø127 (Optional: ISO 228-G11/4)
SLW46
Ø127

Extensions and filling A mounting adaptors

Adaptor single Adaptor with filler connection

A
/2” BSP
95

1
45

6xØ7(PCDØ73)
80

6xØ7(PCDØ73)
Ø85
400
2

Ø85

180 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 24
Ordering Information

Standard products table

Part number Supersedes Replacement elements

ABL1G114QXWL3 ABL1-G11/4-QXWL-3 QXWL3

ABL2G114QXWL13V ABL2-G11/4-QXWL-1-3-V QXWL13
ABL2U112QXWL13V ABL2-U11/2-QXWL-1-3-V QXWL13
ADAPTORABLG114FP ADAPTOR-ABL-G11/4-FP -

Product configurator
Product number Mounting options Filtration (3µm) Indicators Options

ABL1 1000 l/min G114 ISO 228 - G11/4 (BSP) QXWL3 ABL1 Only None None

ABL2 2000 l/min U112 11/2 UN-16-2B QXWL13 ABL2 Only V Visual SNG Vacuum/Pressure Gauge

Adaptor With Filler

FP
Connection

Product configurator
Product number Mounting options Options

Adaptor ABL G114 ISO 228 - G11/4 (BSP) SNG Single Adaptor

Adaptor With Filler

U112 11/2 UN-16-2B FP
Connection

Replacement elements
Part number Supersedes Description
QXWL3 QXWL-3 3µ
QXWL13 QXWL1-3 3µ
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you
to contact Parker Filtration for availability.

Reservoir equipment
181
Notes

182 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Reservoir Equipment

Glass-Filled Nylon and Metal Breathers

IP65 Rated, Metal, Screw-on and Lockables

Reservoir equipment
183
 Reservoir Equipment

IP65 Rated Filler Breathers

Specification for Single and 6 Hole Installation

Option 1
Construction: Strainers: Pressurisation valve:
Moulded in non-corrodible Unique design diffuses oil Nylon/Nitrile.
glass-filled nylon combining flow into the reservoir. Dipstick:
strength with a lightweight (1) Single length in Available for use with options
design. polypropylene (95mm length) 1 and 2. Dipsticks are
Options: (2) 2-piece telescopic in available in 2 lengths and in
(1) single (63mm dia) hole polypropylene (195mm length packs of 10.
Filler breather installation that max.)
Dipstick material:
eliminates drilled and tapped Filtration element: ABS.
holes using self-locking Expanded polyurethane
clamps. foam, 10 micron nominal. Hi/Lo indicators:
(2) 6 hole Acetal. Adjustable Red/Green
Seals: level indicators.
Filler Breather Installation Nitrile.
that uses 6 x No 10 thread Dipstick lengths:
forming screws. Working temperature: 200mm and 400mm.
(3) 3 hole filler breather -30°C to +90°C.
Breather weight:
utilises 3 x zinc and clear Pressurised filler breathers: 0.2Kg.
chromate plated steel Available in 3 pressure
screws. options to maintain a positive Anti-splash feature:
pressure in a reservoir. The unique design anti-
splash feature is standard
Pressurisation options: on all options 1 and 2 and
0.2, 0.35 and 0.7 bar crack allows for a dipstick to be
pressure. fitted if required.

Option 1 Filler Breathers (Single Hole Installation)

Ø101
AB98XXX Pressurised Pressure Drop Curves
1.2 16.9

1.0 0.7 Valve 14.6

70

0.8 11.6

Δp (PSID)
0.35 Valve
0.6 7.3
10 max
167

0.4 5.8
0.2 Valve
0.2 2.9

0 0
0 5 10 15
Ø42 Flow I/sec (Air)
A
AB98XXX Non-Pressurised Pressure Drop Curves
0.25

0.20 2.9
Δp (PSID)

0.15

A
With Anti-Splash 1.5
Ø7.0 0.10

Option 1. Single Hole Filler Breathers – Pressurised 0.05

Without Anti-Splash
Part number Supersedes Description 10µ nom
AB98212011 AB.98212011.UC Pressurised 0.2bar with 95mm strainer 0 0
0 5 10 15
AB98213011 AB.98213011.UC Pressurised 0.35bar with 95mm strainer
AB98212001 AB.98212001.UC Pressurised 0.2bar without strainer Flow I/sec (Air)
AB98212021 AB.98212021.UC Pressurised 0.2bar with telescopic strainer
AB98213001 AB.98213001.UC Pressurised 0.35bar without strainer Option 1. Single Hole Filler Breathers – Non-Pressurised
AB98213021 AB.98213021.UC Pressurised 0.35bar with telescopic strainer Part number Supersedes Description 10µ nom
AB98217001 AB.98217001.UC Pressurised 0.7bar without strainer AB98210011 AB.98210011.UC Filler breather with 95mm strainer
AB98217011 AB.98217011.UC Pressurised 0.7bar with 95mm strainer AB98210021 AB.98210021.UC Filler breather with telescopic strainer
AB98217021 AB.98217021.UC Pressurised 0.7bar with telescopic strainer AB98210001 AB.98210001.UC Filler breather without strainer
Note 1: Part numbers featured with bold highlighted codes will Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection. ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability. you to contact Parker Filtration for availability.

184 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 25
Filler Breathers (6 Hole Installation)

Option 2
Note 1. Un-pressurised 6 hole fixing:
Form 6 off tank mounting holes between Ø4.0 and 4.4mm (dependent on the material and thickness – see guide below)
equispaced on 70-73mm P.C.D. to suit supplied No.10 thread forming screws.

Note 2. Pressurised 6-hole fixing:

Form 6 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on the material and thickness – see guide below)
equispaced on 73mm P.C.D. to suit supplied No.10 thread forming screws.

Note 3. Reservoir mounting guide

Sheet thickness mm Hole size mm
1.2 4.0
2.0 4.10
Ø101
3.15 4.30
4.0 4.30
5.0 4.40
72

Ø101

Telescopic Strainer
The telescopic strainer design
271

is ideal, where reservoir depth

allows, to increase the surface
72

area of the strainer, improving

still further its straining ability,
oil flow-through and allowing for
longer dipstick lengths.
167

Ø31
Ø42

Option 2. 6 Hole Filler Breathers – Pressurised

Part number Supersedes Description 10µ nom
AB98817011 AB.98817011.UC Pressurised 0.7bar with 95mm strainer Ø42
AB98812001 AB.98812001.UC Pressurised 0.2bar without strainer
AB98812011 AB.98812011.UC Pressurised 0.2bar with 95mm strainer
AB98812021 AB.98812021.UC Pressurised 0.2bar with telescopic strainer
AB98813001 AB.98813001.UC Pressurised 0.35bar without strainer
AB98813011 AB.98813011.UC Pressurised 0.35bar with 95mm strainer
AB98813021 AB.98813021.UC Pressurised 0.35bar with telescopic strainer
AB98817001 AB.98817001.UC Pressurised 0.7bar without strainer
AB98817021 AB.98817021.UC Pressurised 0.7bar with telescopic strainer
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.

Option 2. 6 Hole Filler Breathers – Non-Pressurised

A
73

70

Part number Supersedes Description 10µ nom

AB98810001 AB.98810001.UC Filler breather without strainer
AB98810011 AB.98810011.UC Filler breather with 95mm strainer
AB98810021 AB.98810021.UC Filler breather with telescopic strainer
4.4
Note 1: Part numbers featured with bold highlighted codes will 6x Ø
4.0
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.
Reservoir equipment
185
 Reservoir Equipment

Filler Breathers
Option 3 Filler Breathers (3 Hole Installation)

Ø50.5

Ø53
46
63.5
New Options Fully Tested
A

41.3
As part of the design development
programme for the new IP65 Filler
Breathers, extensive performance and
endurance testing was carried out to 4.4
3x Ø
ensure durability and efficiency. Ø24 4.0

Note: Form 3 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on the
3-hole Filler Breathers (6-hole available) material and thickness – see chart for guide) equispaced on 41.3 P.C.D. to suit No.
Part number Description 10µ nom 10 thread forming screws supplied.
AB68110 Filler breather without strainer
AB68118 Filler breather with 95mm strainer
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.
Note 3: Not suitable for use with B.68206/207
Note 4: 6-hole AB.68910/AB.68918 option available.

Dipstick Options

Dipstick Ordering
Part number Supersedes Description
B68206 DIP.206 10 x 200mm Dipsticks
B68207 DIP.207 10 x 400mm Dipsticks
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.

Dipsticks
The dipstick, available in 2 lengths – 200mm and 400mm,
can be cut to the required length or left as it is and the Hi/Lo
indicators moved and positioned on the dipstick itself by
squeezing the sides of the indicator and repositioning along
the dipstick.

186 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 25
 Reservoir Equipment

Screw-On Type Air Breathers

Standard Screw-On Breathers - Specification

Option 1– G1/2 and G3/4 (Ø101)

Construction: Pressurisation valve:
Moulded in non-corrodible glass-filled nylon Nylon/Nitrile.
combining strength with a lightweight design. Dipstick:
Option 1: Available for use with all options. Dipsticks
2 screw on type air breathers are available are available in 2 lengths and in packs of 10.
– G1/2 or G3/4 threaded base models. Dipstick material:
Filtration element: ABS.
Expanded polyurethane foam, 10 micron Hi/Lo indicators:
nominal. Acetal. Adjustable red/green level indicators.
Seals: Dipstick lengths:
Nitrile. 200mm and 400mm.
Working temperature: Breather weight:
-30°C to +90°C. 0.2Kg.
Pressurised air breathers: Anti-splash feature:
Available in 3 pressure options to maintain a The unique design anti-splash feature is
positive pressure in a reservoir. standard on option 1 and allows for a
Pressurisation options: dipstick to be fitted if required.
0.2, 0.35 and 0.7 bar crack pressure.

Pressure Drop Flow Curve

AB98XXX Screw-on Non-Pressurised Pressure Drop Curves Ø101

G1/2
0.30 4.4

0.25

0.20 2.9
Δp (PSID)
Δp (bar)

0.15
93

0.10 With Anti-Splash

1.5

0.05
13 10

Without Anti-Splash
0 0
0 5 10 15
Flow I/sec (Air) G1/2 30 A/F HEX

Note: For pressure drop information on the Option 1. Pressurised consult Parker Filtration. A

Option 1 – G1/2 or G3/4

Part number Supersedes Description 10µ nom
AB98610101 AB.98610101.UC G1/2 Un-pressurised
AB98612101 AB.98612101.UC G1/2 pressurised 0.2 bar
AB98613101 AB.98613101.UC G1/2 pressurised 0.35 bar
AB98617101 AB.98617101.UC G1/2 pressurised 0.7 bar
AB98410101 AB.98410101.UC G3/4 Un-pressurised
AB98412101 AB.98412101.UC G3/4 pressurised 0.2 bar
AB98413101 AB.98413101.UC G3/4 pressurised 0.35 bar
AB98417101 AB.98417101.UC G3/4 pressurised 0.7 bar
Note 1: Part numbers featured with bold highlighted codes will A
ensure a ‘standard’ product selection. Ø101
Note 2: Alternate displayed part number selection will require G/ 3 4
you to contact Parker Filtration for availability.
96
16 10

G3/4 30 A/F HEX

Reservoir equipment
187
 Reservoir Equipment

Screw-On Type Air Breathers

Compact Screw-On Breathers - Specification

Option 2 – G1/4, G3/8, R1/2 and R3/4 (Ø40)

Construction: Hi/Lo indicators:
G1/4, G3/8, R1/2 and R3/4 cap and base plate mouldings in nylon 66. Acetal adjustable red/green level indicators.
Element: Dipstick lengths:
Expanded Polyurethane foam, 10 micron nominal. 200mm and 400mm (packs of 10).
Dipstick: Breather weights:
Available for use with R1/2 and R3/4. 0.028Kg
Dipstick material:
ABS.

Pressure Drop Flow Curve Ordering Information

0.20
G1/4
219 Option 2 – G1/4, G3/8, R1/2 and R3/4 (Packs of 10 only)
0.18
Part number Supersedes Description 10µ nom
0.16 AB683101 AB.683101.UC G1/4 Un-pressurised
0.14 AB68X101 AB.68X101.UC G3/8 Un-pressurised
Δp (PSID)

0.12 AB68Y101 AB.68Y101.UC R1/2 Un-pressurised

Δp (bar)

0.10 115 AB68Z101 AB.68Z101.UC R3/4 Un-pressurised

0.08 Note 1: Part numbers featured with bold highlighted codes will
0.06 ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
0.04
you to contact Parker Filtration for availability.
0.02
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
Flow I/sec (Air)
Note: For pressure drop information on G3/8, R1/2 and R3/4, consult Parker Filtration.

Ø40 G1/4 Ø40 G3/8

57

59
6

9
14

12.5

20 A/F HEX G1/4 20 A/F HEX G3/8

Ø40 R1/2 Ø40 R3/4

60

60
9
9

20 A/F HEX 20 A/F HEX

13.5

14

R1/2 R3/4

188 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 25
Screw-On Type Air Breathers - Specification

Option 3 – G3/8, G1/2 and G3/4 (Ø70)

Construction: Pressurisation valve:
Mouldings in glass-filled nylon and glass coupled polypropylene. Nylon.
Element: Dipstick:
Expanded Polyurethane foam, 10 micron nominal. Available for use with G3/8, G1/2 and G3/4.
Seals: Dipstick material:
Nitrile. Mini-series in brass.
Pressurised air breathers: Hi/Lo indicators:
Available G3/8, G1/2 and G3/4, Acetal adjustable red/green level indicators.
3 pressure options to maintain a positive pressure in a reservoir. Dipstick lengths:
Pressurisation options: 200mm and 400mm (packs of 10).
0.2, 0.35 and 0.7 bar crack pressure. Breather weights:
0.075Kg, Mini-series – 0.019Kg.

Pressure Drop Flow Curve Ordering Information

0.14 Option 3 – G3/8, G1/2 and G3/4
G1/2
0.12 Part number Supersedes Description 10µ nom
G3/8 G3/4 AB685101 SAB.5101 G3/8 Un-pressurised
0.10 AB687101 SAB.7101 G3/4 Un-pressurised
AB686101 SAB.6101 G1/2 Un-pressurised
Δp (bar)

0.08
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
0.06
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.
0.04

0.02

0
0 5 10 15 20 25
Flow I/sec (Air)

Ø70 G3/8 Ø70 G1/2

The mini-series breather

Screw-on option Push-fit option
Ø20
68

68
8.5

8.5

20
36
12.5

12.5

G3/8 28 A/F HEX G1/2 28 A/F HEX

Ø22 Spotface

Ø70
G3/4 A
16.25
Ø 16.00
15°
30°
15.10
1.6

Ø 15.00
10.5 7.8
min

Ø11.8 Ø13.55
71

Ø13.35
8.5

G1/4
15.5

Part number Description

S680003 Gearbox air breather
G3/4 31 A/F HEX
A

Reservoir equipment
189
 Reservoir Equipment

Filler Breathers (Metal)

Metal Airbreather/Filler breather Specification

Ø76.2 Locking lug

option (5561)
43.4
For added
58.2

security, certain
Parker Filtration
Metal Filler
153.5

Breather Filters
can be specified
with a locking
lug option.

Ø49.5 Ø83

Ordering Information

Standard products table

Part number Supersedes Replacement cap Supersedes Displacement Crack Micron Air flow Thread Weight
I/min pressure rating m3/min

Threaded airbreather (unpressurised)

SAB156210 SAB.1562.10 N/A N/A 430 N/A 10µ nom 0.45 G3/4 0.20kg
SAB156310 SAB.1563.10 N/A N/A 135 N/A 10µ nom 0.15 G1/4 0.06kg
Filler breather - filter flange type (unpressurised)
AB116310 AB.1163.10 CAP.116310 CAP.1163.10 430 N/A 10µ nom 0.45 N/A 0.24kg
AB138010 AB.1380.10 CAP.138010 CAP.1380.10 135 N/A 10µ nom 0.15 N/A 0.08kg
5561 N/A N/A N/A 430 N/A 10µ nom 0.45 N/A 0.24kg
Filler breather - filter flange type (pressurised)
PAB1730105 PAB.1730.10.5 CAP.1730105 CAP.1730.10.5 430 0.35 bar 10µ nom 0.45 N/A 0.27kg
PAB17301010 PAB.1730.10.10 CAP.17301010 CAP.1730.10.10 430 0.70 bar 10µ nom 0.45 N/A 0.27kg
Air breather - threaded type (pressurised)
SPA1731105 SPA.1731.10.5 N/A N/A 430 0.35 bar 10µ nom 0.45 G3/4 0.20kg
SPA17311010 SPA.1731.10.10 N/A N/A 430 0.70 bar 10µ nom 0.45 G3/4 0.20kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

190 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 26
1731 - Threaded type (Pressurised) Ø76.2

Displacement: Weight:
430 l/min. 0.2 Kg.

43.4
Micron rating: Thread:

65
16
10µ nominal G3/4.
Air flow: Valve crack-pressure:

6
0.45m3/min. 0.35 and 35 A/F HEX
G3/4
0.7 bar.
Ø44.5
1562-1563 - Threaded type (Un-pressurised)
Displacement: Weight:
1562 = 430 l/min. 1562 = 0.20 Kg.
36.5

1563 = 135 l/min. 1563 = 0.06 Kg.

56.5
Micron rating: Thread:

13
10µ nominal 1562 = G3/4.
Air flow: 1563 = G1/4. 16 A/F HEX
7

1562 = 0.45m3/min.
1563 = 0.15m3/min. G1/4/G3/4

Ø44.5
1380 - Filter flange type
Displacement: Air flow:
135 l/min. 0.15m3/min.
36.5
47

Micron rating: Weight:

10µ nominal 0.08 Kg.
110

Ø51

Tank installation notes 2. Pressurised 6 hole fixing

1. Un-pressurised 6 hole fixing Form 6 off mounting holes between 3. Un-pressurised 3 hole fixing
Form off tank mounting holes between Ø4.0 and Ø4.4 equispaced on 73.0 Form 3 off tank mounting holes
Ø4.0 and Ø4.4 (dependant on the material P.C.D. to suit between Ø4.0 and Ø4.4 equispaced on
and thickness, consult Parker Filtration) No. 10 thread forming screws supplied. 41.3 P.C.D. to suit
equispaced on 70.0-73.0 P.C.D. to suit No. 10 thread forming screws supplied.
No. 10 thread forming screws supplied.

Breather Units Ordering Information

Small Breather Ø35 Part number Supersedes Description

H00279001 H00279-001 Small breather 1/4 BSPT thread
Specification H00279002 H00279-002 Small breather 3/8 BSPT thread
H00279003 H00279-003 Small breather 1/2 BSPT thread

22

Three size:
1/4” BSPT

3/8” BSPT
5
1/2” BSPT

Reservoir equipment
191
 Reservoir Equipment

Lockable Filler Breather

Installation Details

Tank Mounting

51.5
10
7
78
Ø 76

Tank mounting hole

Ø51
3 off equispaced clamps
Strainer

Stand Pipe Mounting

2 locking screws threaded type at positions
X and Y
3 locking screws push on type at positions
X, Y and Z
Flap to protect lock X

107
34
Z
50.5

Y
B

A
141
81 68
149

Lockable Filler Breather Selection

Total assembly pressure drop flow curve – 10µ elements

Flow (US GPM)

0 132 264 394 528

0.06 0.87
10µ

0.04 0.58
Δp (PSID)
Δp (bar)

0.02 0.29

0 0
0 500 1000 1500 2000
Flow (l/min)

Ordering Information

Part number Description

LFC622142 Non-breathing (No element) Clamp mounting with strainer
LFC622212 10µ nom element, G2 thread with strainer
LFC622242 10µ nom element, clamp mounting with strainer
LFC622432 10µ nom vented (air in) push on mounting with strainer
LFC622122 Non-breathing (No element) 2” BSP thread with strainer
LFC622222 10µ nom element, G21/2 thread with strainer
LFC622411 10µ nom vented (air in) G2 thread without strainer
Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.

192 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 26
 Reservoir Equipment

Spin-On Air Breathers

Reservoir equipment
193
 Reservoir Equipment

Spin-On Air Breathers

Specification

High capacity air breathers designed for the removal of airborne

contamination in hydraulic systems to support environmental
maintenance.
Ideal for high flow systems and heavily contaminated
environments.
Disposable spin-on elements quickly and easily replaced.
5 micron nominal quality filtration elements.
2 models available – 700 l/min and 1500 l/min.
Available with a pressurised valve in the mounting adaptor.

Standard spin-on air breather stem

Ø94 Reservoir cutout Ø25 maximum

Ø51

Circuit symbol
(standard)
3 off M6 fixing holes
equispaced on 41.3 P.C.D.
A

Pressurised spin-on air breather stem

B

Reservoir cutout Ø25 maximum

B

Ø63.5

Ø97
Circuit symbol
60

(pressurised)
6

Note: Spin-on air breather elements can

3 off M6 fixing holes also be mounted directly on to any suitable
equispaced on 50 P.C.D. length of 3/4” BSP threaded pipe.

Ordering Information

5µ Spin-on air breathers

Part number Supersedes Air flow Valve crack A mm B mm Weight Replacement
pressure element

S340056 N/A 700 l/min Unpressurised 60 120 0.6Kg 4930

S340052 N/A 1500 l/min Unpressurised 148 208 0.75Kg 588410
S340058 *S.340058 700 l/min 0.35 Bar 60 120 0.69Kg 4930
S340059 **S.340059 700 l/min 0.70 Bar 60 120 0.69Kg 4930
S340054 *S.340054 1500 l/min 0.35 Bar 148 208 0.8Kg 588410
S340055 **S.340055 1500 l/min 0.70 Bar 148 208 0.8Kg 588410
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Note 3: Reservoir must be capable of withstanding pressurisation.

194 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 27
 High capacity air breathers and filler/breathers designed for the
removal of airborne contamination in hydraulic systems to support
environmental maintenance.
Ideal for high flow systems and heavily contaminated environments.
Disposable spin-on elements quickly and easily replaced.
3 micron absolute quality filtration elements.
Models available – 1700 l/min and 3000 l/min.

ØA
ØA

Mounting face for standard and large breather

73 PCD Ø57 hole in tank B

B C

E BSPT
C

Ø88 boss or spot face 6 fitting holes Strainer 30 mesh

(1.6 micron surface finish) Ø5.6 equispaced (600 microns)
on 73 PCD

Ø48
Large breather filter

Specification

Maximum operating temperature: Weights:

-20°C to +90°C. Large: H00834001 1.0 Kg
Construction materials: H00834002 1.65 Kg
Epoxy coated steel components to resist corrosion. H00834003 1.90 Kg
resistant paint finish on large breathers. Each breather filler is supplied with mounting gaskets and
self-tapping screws.
Fluid compatibility:
Suitable for use with mineral oils and water oil emulsions.

Ordering Information

Large breather dimensions Large breather filler dimensions

Part number Supersedes Air flow Dimensions (mm) Ports Part Supersedes Air flow Dimensions (mm) Replacement Supersedes
l/min number l/min element complete
A B C D A B C with bayonet
H00834004 H00834-004 1700 97 147 135 30 3
/4 H00834001 H00834-001 1700 97 165 114 H00834006 H00834-006
H00834005 H00834-005 3000 134 198 180 36 11/4 H00834002 H00834-002 3000 134 204 114 H00834007 H00834-007
Note 1: Part numbers featured with bold highlighted codes will H00834003 H00834-003 3000 134 204 203 H00834007 H00834-007
ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability.
Reservoir equipment
195
Notes

196 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Reservoir Equipment

Fluid Level Measurement

Fluid Level Temperature Gauges

Reservoir equipment
197
 Reservoir Equipment

Fluid Level/Temperature Gauges

Specification

Construction: Note:
Lens Transparent polyamide. A 500mm model with metal shroud finished
Lens base Nylon 66. in black available.
Shroud High impact polystyrene. Recommended bolt tightening torque:
No aluminium content. 10 Nm maximum.
Bolts: Thermometer scale range:
Steel. +30°C to +90°C.
Seals: Temperature Indicator:
Nitrile. Blue alcohol.
Maximum working pressure: Note:
1 bar. 1. Locate seals in mounting recess before
Working temperature: fitting.
-30°C to +90°C. 2. Select the size required by studying the
Fluid compatibility: installation details to determine a part
Mineral and petroleum based oils. number.

Size 1 Installation Details

For ‘through hole’ mounting: 43 18.5 24

Drive
–Thread– slot

17
Hole size M10 M12
Preferred 11.0 13.0
Maximum 13.0 14.0 Black
line
110
76
30

For tapped holes: Red

line
18

Holes to be tapped square to mounting face.

Tolerance on hole centres: +0.5
-0.2
17 A/F HEX

41.5

For welded back nuts:

The above details should be combined.

Installation and Application Information

Simple to Install Easy to Read
The universal fixing is designed for either front or rear fixing. The high-visibility lens is one-piece for added security and
Just two holes in the tank – threaded for front fixing – and the moulded in shatterproof, transparent polyamide for an
gauge is ready to install. After positioning the gauge the bolts accurate and clear oil level and temperature indication. Further
are simply tightened to provide a secure seal. There is no fear gauge protection is provided by a specially designed shroud
of leakage with the square section seals and the two-point moulded in high-impact, black polystyrene.
mounting system eliminates problems with tank distortion.
M10 and M12 bolt thread options are available.

Size 1 Ordering Information

Standard products table

Part number Supersedes Desciption Centres Thread Max temp Weight
FL69121 FLT.121 Fluid level/temp 76mm M10 90°C 0.13Kg
FL69123 FLT.123 Fluid level/temp 76mm M12 90°C 0.13Kg
FL69111 FL.111 Fluid level 76mm M10 90°C 0.13Kg
FL69113 FL.113 Fluid level 76mm M12 90°C 0.13Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

198 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 28
Size 2 Installation Details

Drive slot
43 18.5 24

17
Black line

A/F HEX
161

127

17
74

Red line
22

41.5

Size 2 Ordering Information

Standard products table

Part number Supersedes Desciption Centres Thread Max temp Weight
FL69221 FLT.221 Fluid level/temp 127mm M10 90°C 0.15Kg
FL69223 FLT.223 Fluid level/temp 127mm M12 90°C 0.15Kg
FL69211 FL.211 Fluid level 127mm M10 90°C 0.15Kg
FL69213 FL.213 Fluid level 127mm M12 90°C 0.15Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Size 3 Installation Details

Drive slot
18.5 24
43
17

Black
line
17 A/F HEX
288
254
202

Red
line
22

41.5

Size 3 Ordering Information

Standard products table

Part number Supersedes Desciption Centres Thread Max temp Weight
FL69321 FLT.321 Fluid level/temp 254mm M10 90°C 0.23Kg
FL69323 FLT.323 Fluid level/temp 254mm M12 90°C 0.23Kg
FL69311 FL.311 Fluid level 254mm M10 90°C 0.23Kg
FL69313 FL.313 Fluid level 254mm M12 90°C 0.23Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Reservoir equipment
199
Notes

200 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Reservoir Equipment

Reservoir Float &

Level Switches

Reservoir equipment
201
 Reservoir Equipment

FL Series
Adjustable Float Switch
Features & Benefits

Float Switch Features Include:

Float switches can be adjusted on site
Reliable design using reed switches
3 lengths available, 500mm, 1000mm and
1500mm

The FL Series is a range of vertically mounted, single float The FL Series is designed to be adjusted by the user to fit
level switches operating on the proven reed switch and their tank. The unit consists of a stem with the reed switch,
magnet principle. thermal switch (if fitted) and float already set in position. The
customer can cut the stem to fit their tank, and assemble it to
The FL Series float switch can be tailored by the user for
the header. The unit is then ready to be fitted to the tank.
a particular application, by adjusting the length of the float
switch tube. It is also possible for the user to select the The unit has a factory set “Open On Rise” switching
switching configuration by inverting the float, giving either configuration, but this can be changed by reversing the float.
open on rise or close on rise operation. The common temperature switches used are 60°C “Open On
Rise” or 60°C “Close On Rise”. However, other temperature
The unit is supplied part assembled, with detailed instructions
specifications may be obtained on request. A standard DIN
for the user to complete assembly to the specifications of the
43650 connector is supplied with the unit.
application and to install the unit.

Typical Specification Installation Drawing

Installation
approx

Mounting: 1” BSP threaded header

/F
35

Gasket: 2.0mm thick sealing washer 3 6A

Length: Adjustable up to 1500mm HEX
Electrical specification
Supply voltage: 240 Vac maximum
300 Vdc maximum
Switching current: 0.5A
Thermostat ratings
Normal voltage: 250V
Current rating: 4A (10A max)
46
56

Material specification
69
77

Header: Brass Stem: Brass

Float: Polypropylene Gasket: Klingersil grade C4324
to BS7531 grade Y
Other parameters
Customer Adjustable

Fluid types: Any liquids compatible with brass and 1” BSPP thread
polypropylene

Polypropylene float
Ø28.5

Ordering Information
Standard products table
Part number Supersedes Desciption
FL050010R FL-0500-1-0R 500mm long float level switch
FL100010R FL-1000-1-0R 1000mm long float level switch
FL150010R FL-1500-1-0R 1500mm long float level switch

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

202 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 29
 Reservoir Equipment

CLS46
Capacitive Level Switch
Features & Benefits

Features Include:
Rugged construction
Simple to install
Delay circuitry prevents false alarms
Purely electronic, no moving components
Integrated test feature

The CLS46 Liquid Level Switch is an active device which is The CLS46 Capacitive Level Switch is designed to detect
designed to give an alarm signal if fluid falls below a preset level. the loss of fluid below its position in the tank.
It will only give an output signal after a few seconds of low level to
The CLS46 Series has no moving parts and it is therefore
eliminate false alarms due to turbulence. The fact that the CLS46
suitable for all applications, particularly where space and
Series has no moving parts and incorporates a built in delay
access inside a vessel is at a minimum.
means that it is ideal in applications where mechanically operated
switches mis-trigger due to vibration and fluid turbulence. The CLS46 Series compliments the existing range of level
measurement instrumentation supplied by Parker Hannifin.

Technical Specification Installation Details

1.3
9”
Dimensions: See drawing a
(HE corn cros
Electrical rating: X 1 ers s
.2”
Supply voltage: 7-40 Vdc Supply current: 3.0mA A/F
)
Max. load current: 1.0A Alarm delay time: 10.0 seconds
Connections:
V+: Positive power supply
20.1

GND: Negative power supply or GND

12.7
Output: Transistor switched to GND on alarm
Test: Ground to operate
3
Body: Connected to ground
Fluid types:
Water based fluids compatible with brass, PTFE and flurosilicone 24.5

Construction:
Body: Brass Probe: PTFE
34

Terminals: SAE CA210 brass, tin plated

Seals: Flurosilicone
15.2

12.6

Connector: 30% glass filled nylon 6

Environmental ratings
Max. pressure: 5.0 bar (72 PSI)
15

Temp. ranges: Fluid: -40°C to +130°C 1/4” NPTF,

Ambient: -40°C to +100°C / ” NPTF or 1/2” BSPT
1 2

Storage: -50°C to +140°C

56.5

thread
Sealing: IP67
Vibration: 6g 10-50Hz (600-3000rpm)
Shock: 50g, 6.3mS
Weight: 53g

Ordering Information
Standard products table
Part number Desciption
CLS46 Capacitive fluid level sensor
CLS46Connector Capacitive fluid level sensor connector
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Reservoir equipment
203
 Reservoir Equipment

Fluid Power Products

Hydraulic system protection from Parker is further confirmed with a quality range of fluid power products that include suction
strainers, check valves pressure gauges and a pipe clamping system that will ensure secure pipe installations.
For information on Parker Filtration products and technology:
Tel: +44(0)1924 487000 Fax: +44(0)1924 487001 Email: filtrationinfo@parker.com

204
 Reservoir Equipment

Suction Elements

Reservoir equipment
205
 Reservoir Equipment

Suction Elements
Specification

Construction: * Non-standard elements are available to

Stainless steel media 30% glass filled nylon order. Consult Parker Filtration.
head. Zintec centre tube.
Epoxy adhesives.
Maximum working temperature: Flow (US GPM)
90ºC. 132
0 13 26 39 53 66 79 92 106 119
0.04 0.58
Filtration media:
125 micron*.

23
SE.1320
0.03 0.44

SE 326
.13
Flow range: 20

4
SE.1319

SE.1457

19
132
.12

.1
SE

Δp (PSID)
SE

.12
SE
15-500 l/min.

Δp (bar)

SE.
0.02 0.29
Bypass rating:
0.17 bar. 1
SE.122
0.01 0.15
Mounting threads:
G /2 up to G3.
1
0
0
0 50 100 150 200 250 300 350 400 450 500
Flow (l/min)

Installation - Suction Elements Without Bypass Installation - Suction Elements with Bypass
A C A/F HEX
A C A/F HEX
ØB

ØB
Mounting thread
Mounting thread

Circuit symbol

Circuit symbol

Ordering Information - Without Bypass

Standard products table
Part number Supersedes Air flow Ports Micron Dimensions (mm) Weight Bypass
l/min BSP rating kg rating
A B C
SE75111110 SE.1319 15 /2
1
125 105.5 46 36 0.08 N/A
SE75221110 SE.1320 25 /4
3
125 109.5 64 46 0.15 N/A
SE75231210 SE.1457 50 1 125 139.5 64 55 0.17 N/A
SE75351210 SE.1323 95 11/2 125 140 86 65 0.28 N/A
SE75351310 SE.1324 130 11/2 125 200 86 65 0.33 N/A
SE75361410 SE.1326 180 2 125 260 86 75 0.40 N/A
SE75461210 SE.1219 225 2 125 150 150 70 0.64 N/A
SE75471310 SE.1220 350 21/2 125 212 150 90 0.72 N/A
SE75481410 SE.1221 500 3 125 272 150 100 0.92 N/A
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Ordering Information - With Bypass

Standard products table
Part number Supersedes Air flow Ports Micron Dimensions (mm) Weight Bypass
l/min BSP rating kg rating
A B C
SE75111111 SE.5100 15 /2
1
125 105.5 46 36 0.11 0.17 bar
SE75221111 SE.5101 25 /4
3
125 109.5 64 46 0.18 0.17 bar
SE75231211 SE.5102 50 1 125 139.5 64 55 0.21 0.17 bar
SE75351211 SE.5103 95 11/2 125 140 86 65 0.31 0.17 bar
SE75351311 SE.5104 130 11/2 125 200 86 65 0.36 0.17 bar
SE75361411 SE.5105 180 2 125 260 86 75 0.43 0.17 bar
SE75461211 SE.5106 225 2 125 150 150 70 0.67 0.17 bar
SE75471311 SE.5107 350 21/2 125 212 150 90 0.75 0.17 bar
SE75481411 SE.5108 500 3 125 272 150 100 0.95 0.17 bar
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

206 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 30
 Reservoir Equipment

Diffusers
Installation Details

A
Specification

Construction: Flow range:

Zintec body. 50 l/min up to 454 l/min.
ØB
30% glass-filled nylon head. Mounting threads:
Zintec end cap. G3/4 up to G2. Mounting thread
Epoxy adhesives.

C A/F HEX

120° plain area

The effect of fitting a diffuser The benefits of specifying a Parker Filtration Diffuser
Note: When installing a diffuser the Installing a Parker Filtration Diffuser in a hydraulic reservoir is
plain area on the outside must be a simple operation that can make a big difference to system
facing the pump inlet. efficiency.
With its special concentric tubes designed with discharge
holes 180° opposed fluid aeration, foaming and reservoir noise
are reduced and pump life extended by reducing cavitation to
the pump inlet.
Diffusers manufactured to customer specifications and other
sizes of diffusers are available.
Ordering Information
Standard products table
Part number Flow Ports Dimensions (mm) Weight
l/min BSP kg
A B C
2201 114 1 127 86 55 0.42
2202 227 11/2 178 86 65 0.56
2210 50 3
/4 120 62 46 0.27
2203 454 2 242 86 75 0.69
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir equipment
207
 Reservoir Equipment

Inline Filters
Metal Inline Filter - Specification

Construction: Max. flow: Working temperature: Flow direction:

Head – zinc. 90 l/min. -30°C to +80°C. From outside to inside.
Bowl – Aluminium Max working pressure: Seal: Weight:
BS1470/1050A. 1987. 7 bar. Nitrile. 1.5 Kg.
Element: Thread: Bowl tightening torque:
Zintec/Stainless steel. *Alternative media can be
G1. 12 Nm. specified.
125 micron*.

Installation Details Filter Selection

Total assembly pressure drop flow curve
G1 Oil Viscosity 30 cSt Relative density 0.856
Flow (US GPM)
48
24

0 5 11 16 21 26 31 37 42
Circuit symbol 0.5 7.3
10

0.4 5.8
116

Δp (PSID)
0.3 4.4

Δp (bar)
216

0.2 2.9
24

99

0.1 1.5
48
56

0 0
0 20 40 60 80 100 120 140 160
Flow (l/min)
54
160

Ø78.5 2 off fixing

holes Ø7.2
Ordering Information
Minimum for bowl
removal Standard products table
Part number Flow Thread Micron Replacement Supersedes
l/min BSP rating element

IL1115 90 G1 125 EIL1115 E.IL.1115

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.

Non-Corrodible Inline Filter - Specification Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Construction: Max working pressure: freezing.

Housing and bowl 7 bar. Working temperature: Bowl tightening note:
moulded in polyester. Thread: -30°C to +80°C. A box or ring spanner is
Element: G1. (+60°C water). recommended.
Stainless steel mesh. Seal: Flow direction:
125 micron*. *For alternative media
consult Parker Filtration Nitrile. From outside to inside.
Max. flow: Note: When using with Bowl tightening torque: Weight:
120 l/min. water, protect from 12 Nm. 0.5 Kg.

Installation Details
G1
Total assembly pressure drop flow curve
2 off fixing Oil Viscosity 30 cSt Relative density 0.856
Ø45
63

54.5 holes Ø7.5 Flow (US GPM)

30

30
0 5 11 16 21 26 31 37 42
6

1.0 14.5
Ø90
215

57

0.8
49

11.6
102

Inlet
Δp (PSID)

0.6 8.7
Δp (bar)

0.4 5.8

112
9

0.2 2.9

Ø74
60

0
22 A/F HEX 0
0 20 40 60 80 100 120 140 160
Flow (l/min)
Minimum for bowl
removal
Circuit symbol
Ordering Information
Standard products table
Part number Supersedes Thread Appliance Micron Weight Replacement
BSP rating element

IL761151 IL.1151 1 Oil 125 0.5 R.76115

IL761251 IL.1251 1 Water 125 0.5 R.76125
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

208 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 30
 Reservoir Equipment

Drive Couplings
Technical Data

Materials To select coupling model check application to establish

Coupling halves running load condition.
Sintered Steel Check chart for factor (F) and apply factor (F) to *Rating of
Sleeve coupling formulae. This answer you now apply to *Rating/100
Nylon 66 rev/min below.
Max temp sleeve It is advisable always to check shaft sizes being used on
83°C application and check with dimension ‘H’.

Factor (F)
Application Electric motor Petrol/diesel engine
Uniform load 1.00 1.20
Medium shock 1.25 1.50
Heavy shock 1.75 2.00
HP of application x 100 x F
*Rating of coupling= rev/min of application

Installation Details
F

G
Hub withdrawal
clearance A A
Sectioned detail
ØH

ØC

ØB
ØJ

E Grub screw position

Max *Rating/ –H– J

speed 100 rev/min Weight A B C D E F G max min pilot
Part number prefix rev/min kW hp mm mm mm mm mm mm mm bore bore bore
DC28* 5000 0.75 1.00 0.4 40.0 66.0 44.5 38.0 4.0 104.0 84.0 28.0 10.0 7.0
DC42* 5000 1.32 1.75 0.75 42.0 90.0 60.0 42.0 4.0 115.0 88.0 42.0 14.0 10.5
DC55* 4000 6.00 8.00 2.05 59.0 125.0 83.0 65.0 4.0 158.0 122.0 55.0 19.0 16.0 min
38.1 max

Height of keyway from base of bore Assembly data

Metric Imperial 1. Maximum angular misalignment is ±2°. Maximum radial misalignment is ±0.4mm.
Standard bore BS 4500, (1985) BS 1916, Part 1, (1985) 2. Ensure that the Parker Filtration drive coupling gear hubs are an easy fit to their respective shafts.
Standard keyway BS 4325, Part 1 (1980) BS 46, Part 1, (1985) Do not use heavy blows to force the hubs on.
3. When in position, the hubs should have a gap of 4mm as denoted by ‘E’ dimension.
4. Tighten grub screws to locate both gear hubs on to their respective shafts.
Ordering Examples
Parker Filtration drive coupling components are ordered 2. Complete assembly – DCR42PBPB
separately. Here are three examples of complete assemblies Made up of 2x DCR42PB’s
ordered this way. DC42S (Sleeve)
1. Complete assembly – DC28M14B04K Complete model DC42 drive coupling: Both gear hubs have
Made up of a DC28M14 pilot bore of 10.5mm. Not supplied with grub screws.
DC28B04K 3. Complete assembly – DCR55PBB12K
DC28.S (Sleeve) Made up of a DCR55PB
Complete model DC28 drive coupling: One gear hub has DC55B12K
14mm bore with 5mm wide keyway and other hub has a 1/2” DC55S (Sleeve)
bore with 0.125” wide keyway. Complete model DC55 drive coupling: One gear hub pilot
Both hubs supplied with locating grub screw. bored 5/8”, the other hub pilot bored 11/2”. Latter only supplied
with grub screw.

Reservoir equipment
209
 Reservoir Equipment

Drive Couplings
Ordering Information
Model DC.28
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
DC28M16 DC.28.M16 16.0mm 5.0mm 18.4mm
DC28M19 DC.28.M19 19.0mm 6.0mm 21.9mm
DC28M20 DC.28.M20 20.0mm 6.0mm 22.9mm
DC28M22 DC.28.M22 22.0mm 6.0mm 24.9mm
DC28M24 DC.28.M24 24.0mm 8.0mm 27.5mm
DC28M25 DC.28.M25 25.0mm 8.0mm 28.5mm
DC28M28 DC.28.M28 28.0mm 8.0mm 31.5mm
DCR28PB DCR.28.PB N/A 8.0mm N/A
DC28S DC.28.S N/A N/A N/A Range
DC28M10 DC.28.M10 10.0mm 3.0mm 11.5mm from 0.259Kg
DC28M11 DC.28.M11 11.0mm 4.0mm 12.9mm to 0.411Kg
DC28M14 DC.28.M14 14.0mm 5.0mm 16.4mm
DC28M18 DC.28.M18 18.0mm 6.0mm 20.9mm
DC28B03K DC.28.B03K 7/16
0.125 ins 0.50 ins
DC28B04K DC.28.B04K /
1 2
0.125 ins 0.57 ins
DC28B05K DC.28.B05K /
5 8
0.188 ins 0.72 ins
DC28B06K DC.28.B06K /
3 4
0.188 ins 0.84 ins
DC28B07K DC.28.B07K /
7 8
0.250 ins 0.99 ins
DC28B08K DC.28.B08K 1 0.250 ins 1.12 ins
DC28B09K DC.28.B09K 11/8 0.313 ins 1.24 ins

Model DC.42
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
DC42M25 DC.42.M25 25.0mm 8.0mm 28.5mm
DC42M28 DC.42.M28 28.0mm 8.0mm 31.5mm
DC42M30 DC.42.M30 30.0mm 8.0mm 33.5mm
DC42M35 DC.42.M35 35.0mm 10.0mm 38.5mm
DC42M38 DC.42.M38 38.0mm 10.0mm 41.5mm
DC42M42 DC.42.M42 42.0mm 12.0mm 45.5mm
DCR42PB DCR.42.PB N/A 12.0mm N/A
DC42S DC.42.S N/A N/A N/A
DC42M18 DC.42.M18 18.0mm 6.0mm 20.9mm
DC42M19 DC.42.M19 19.0mm 6.0mm 21.9mm Range
DC42M20 DC.42.M20 20.0mm 6.0mm 22.9mm from 0.436Kg
DC42M22 DC.42.M22 22.0mm 6.0mm 24.9mm to 0.753Kg
DC42M24 DC.42.M24 24.0mm 8.0mm 27.5mm
DC42M32 DC.42.M32 32.0mm 10.0mm 35.5mm
DC42B05K DC.42.B05K 5/8
0.188 ins 0.72 ins
DC42B06K DC.42.B06K /
3 4
0.188 ins 0.84 ins
DC42B07K DC.42.B07K 7/8
0.250 ins 0.99 ins
DC42B08K DC.42.B08K 1 0.250 ins 1.12 ins
DC42B09K DC.42.B09K 11/8 0.313 ins 1.24 ins
DC42B10K DC.42.B10K 11/4 0.313 ins 1.37 ins
DC42B11K DC.42.B11K 13/8 0.375 ins 1.49 ins
DC42B12K DC.42.B12K 11/2 0.375 ins 1.61 ins
DC42B13K DC.42.B13K 15/8 0.439 ins 1.76 ins

Model DC.55
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
DCR55PB DCR.55.PB N/A 16.0mm N/A
DC55S DC.55.S N/A N/A N/A
DC55M25 DC.55.M25 25.0mm 8.0mm 28.5mm
DC55M28 DC.55.M28 28.0mm 8.0mm 33.5mm
DC55M30 DC.55.M30 30.0mm 8.0mm 33.5mm
DC55M32 DC.55.M32 32.0mm 10.0mm 35.5mm
DC55M35 DC.55.M35 35.0mm 10.0mm 38.5mm
DC55M38 DC.55.M38 38.0mm 10.0mm 41.5mm Range
DC55M42 DC.55.M42 42.0mm 12.0mm 45.5mm from 1.248 Kg
DC55M55 DC.55.M55 55.0mm 16.0mm 59.5mm – 2.046 Kg
DC55B09K DC.55.B09K 11/8 0.313 ins 1.24 ins
DC55B10K DC.55.B10K 11/4 0.313 ins 1.37 ins
DC55B11K DC.55.B11K 13/8 0.375 ins 1.49 ins
DC55B12K DC.55.B12K 11/2 0.375 ins 1.61 ins
DC55B13K DC.55.B13K 15/8 0.439 ins 1.76 ins
DC55B14K DC.55.B14K 13/4 0.439 ins 1.89 ins Note 1: Part numbers featured with bold highlighted codes will
DC55B15K DC.55.B15K 17/8 0.501 ins 2.01 ins ensure a ‘standard’ product selection.
DC55B16K DC.55.B16K 2 0.501 ins 2.13 ins Note 2: Alternate displayed part number selection will require
DC55B17K DC.55.B17K 21/8 0.626 ins 2.31 ins you to contact Parker Filtration for availability.

210 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 30
 Pipe Clamp System

Multiclamp

Reservoir equipment
211
 Pipe Clamp System

Multiclamp
When only the best Clamping Secure Multiclamp installations
System will do ....specify Multiclamp ensure a leak free, noise free and
vibration free system.
Multiclamp is a system. A system of
components, each one engineered to The neat design of pipe line runs offers
a high standard – that together build to easy maintenance of machinery and
provide effective, all-purpose pipework plant equipment. Visual planning of line
clamping. Multiclamp offers creative runs is straightforward with Multiclamp
and cost-effective environmental – accurate installations can be achieved
benefits to the system designer and without skilled labour – keeping costs
installer. Creating accurate runs of down and quality up.
varying diameter tubes, pipes, hoses
and cables in all industries.

Planning with Multiclamp

These notes have been compiled to assist in planning your Group pipe sizes together to obtain the most economical use
Multiclamp system. of three basic Multiclamp Series.
Multiclamp offers considerable flexibility. For example, it can fit Some sites will require all pipes mounted in one single plane
in with a factory installation that is being built in phases. – either vertical or horizontal.
Should a last minute change in pipe diameter occur during When stacked modules are preferred, the only work to be
installation, an alternative rubber bush is likely to be all that is done on the Multiclamp is to saw off the desired length.
required. Not a complete and expensive re-think of the installation.
If a large number of pipe lines are to be run, it is recommended
Multiclamp metal components can be sprayed to match a that the upper clamping unit is simply cut into two lines only,
vehicle livery or plant installation and, if installed properly, and progressively assembled by securing two pipes at a time.
should require no maintenance. It will be recognised that most odd lengths on site will be used,
and one man can easily cope with a large number of pipe lines
by this simple progressive build up. This assembly will provide
Installation is simple and requires no experience
easy access for servicing and replacing pipes. This method
Anyone can use Multiclamp and only the basic, everyday tools also reduces the quantity of Stacking Nuts and Studs by 50%.
are required.
If a factory installation is being built in phases, it would be
From one pipe to almost any number – because each Multiclamp wise to leave the first phase with a lower clamping unit and
‘position’ can be visually sighted and its position adjusted – an Stacking Nuts in position ready to receive pipe runs for the
almost guaranteed straight run can be obtained. Equally, changes next building phase.
of plane or direction can be achieved simply and securely.

Series 10
6.0mm-20.0mm
(1/4”-3/4”)

Series 16 Stacked modules or single module

6.0mm-28.0mm
(1/4”-1”)

Series 32
10.0mm-50.0mm
(3/8”-2”) Fixing points to suit

Your maximum pipe size will determine the series to use. There is a Stacking stud and
degree of versatility provided by the rubber bushes. You choose from nut not required
in this position
single or multistacked Multiclamp, whichever suits your particular
installation requirements.

212 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 31
Specification

Dimension details supplied in product configurator

Single Clamp B C CTS ( B ) Double Clamp

B C C B
Ø

Series 10
PAT.1170557
A
A
F REF

E
E

Multiclamp – 12 or 16 holes Split Bushes

1 set of clamping units = 1 pair Split bushes are ordered in sets only
i.e. 1 set of bushes = 10 bushes of one size
A B
Ø
Thetford Series 10 B Pipe size
England PAT.1170557

C
H REF

A Ø
G

D E
F

Material Specifications

Zinc plated steel with anti-corrosive, full passivate. Multiclamp Series 10 will accept pipe or hose diameters from 6mm up
can also be multi-stacked using stacking studs and nuts. to 20mm maximum. Series 16 from 6mm up to 28mm and
Series 10 and 16 clamp is supplied in lengths of 603mm and Series 32 from 10mm up to 50mm. Across the 3 Series, there
Series 32 in lengths of 1206mm. These can be simply cut to are 26 different high-quality split rubber bushes to select from
the required lengths for installation. to cope with any combination and number of different pipe
and hose diameters in the same run.
Note: For stainless steel version please consult Parker.

Stacking Nuts Stacking Studs Mounting Adaptors Weld Plate

A Ø A B C
Thread

B D
Thread

A
B

B F E

Stacking nuts are ordered in sets only. Stacking studs are ordered in sets Mounting adaptors are not ordered Weld plates are ordered in sets only.
i.e. 1 set of stacking nuts only. i.e. 1 set of stacking studs in sets. i.e. 1 off mounting adaptors i.e. 1 set of weld plates
= 50 stacking nuts of one size. = 50 stacking studs of one size. = 1 single piece. = 10 weld plates.

Reservoir equipment
213
 Pipe Clamp System

Multiclamp
Ordering Information - Series 10
Product configurator
Part number Supersedes Description Pack Dimensions (mm) Thread Pack
quantity weight
A B C D E F G H Ø
MC101 MC.10.1 Single clamp 10 pairs 25.0 8.5 38.1 55.0 19.0 38.0 9.0 0.60 Kg
MC102 MC.10.2 Double clamp 10 pairs 25.0 8.5 38.1 93.0 19.0 38.0 9.0 1.00 Kg
MC1016 MC.10.16 16 bay clamp 1 pair 34.0 38.1 25.0 15.0 38.1 601.5 19.0 38.0 9.0 0.80 Kg
MCN10 MC.N.10 Stacking nut 50 11.0 33.0 M8 x 1.25 0.80 Kg
MCS10 MC.S.10 Stacking stud 50 32.0 21.0 2.6 M8 x 1.25 0.50 Kg
MCWP10 MC.WP.10 Weld plate 10 13.3 25.0 10.0 6.3 25.0 8.5 0.35 Kg
MCSB10 MC.SB.10 Standard bolt 50 M8 x 1.25 0.55 Kg
MCB10MO MC.B.10.MO Mounting adaptor 1 27.0 25.0 8.7 0.02 Kg

Part number Supersedes Description Pack Dimensions (mm) Pipe size Pack
quantity weight
A B (mm) OD
MCG105 MC.G.10.5 Split bush 10 25.5 27.0 8 5/16 0.13 Kg
MCG106 MC.G.10.6 Split bush 10 25.5 27.0 10 3/8 0.12 Kg
MCG108 MC.G.10.8 Split bush 10 25.5 27.0 12-14 1/2 0.12 Kg
MCG1010 MC.G.10.10 Split bush 10 25.5 27.0 15-16 5/8 0.10 Kg
MCG1012 MC.G.10.12 Split bush 10 25.5 27.0 18-20 3/4 0.90 Kg
MCG104 MC.G.10.4 Split bush 10 25.5 27.0 6 1/4 0.13 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Ordering Information - Series 16

Product configurator
Part number Supersedes Description Pack Dimensions (mm) Thread Pack
quantity weight
A B C D E F G H Ø
MC161 MC.16.1 Single clamp 10 pairs 25.0 7.0 50.8 65.0 23.8 47.6 9.0 0.80 Kg
MC162 MC.16.2 Double clamp 10 pairs 25.0 7.0 50.8 116.0 23.8 47.6 9.0 1.60 Kg
MC1612 MC.16.12 12 bay clamp 1 pair 47.0 50.8 25.0 21.0 50.8 608.8 25.0 51.0 9.0 1.00 Kg
MCN16 MC.N.16 Stacking nut 50 11.0 44.0 M8 x 1.25 1.06 Kg
MCS10 MC.S.10 Stacking stud 50 32.0 21.0 2.6 M8 x 1.25 0.50 Kg
MCWP10 MC.WP.10 Weld plate 10 13.3 25.0 10.0 6.3 25.0 8.5 0.35 Kg
MCSB10 MC.SB.10 Standard bolt 50 M8 x 1.25 0.55 Kg
MCB16MO MC.B.16.MO Mounting adaptor 1 27.0 36.0 8.7 0.06 Kg

Part number Supersedes Description Pack Dimensions (mm) Pipe size Pack
quantity weight
A B (mm) OD
MCG165 MC.G.16.5 Split bush 10 35.4 27.0 8 5/16 0.28 Kg
MCG166 MC.G.16.6 Split bush 10 35.4 27.0 10 3/8 0.28 Kg
MCG168 MC.G.16.8 Split bush 10 35.4 27.0 12-14 1/2 0.26 Kg
MCG1610 MC.G.16.10 Split bush 10 35.4 27.0 15-16 5/8 0.22 Kg
MCG1612 MC.G.16.12 Split bush 10 35.4 27.0 18-20 3/4 0.20 Kg
MCG1614 MC.G.16.14 Split bush 10 35.4 27.0 22.0 7/8 0.18 Kg
MCG1616 MC.G.16.16 Split bush 10 35.4 27.0 25.0 1 0.14 Kg
MCG1618 MC.G.16.18 Split bush 10 35.4 27.0 28.0 0.16 Kg
MCG164 MC.G.16.4 Split bush 10 35.4 27.0 6 1/4 0.28 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

214 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 31
Ordering Information - Series 32
Product configurator
Part number Supersedes Description Pack Dimensions (mm) Thread Pack
quantity weight
A B C D E F G H Ø
MC321 MC.32.1 Single clamp 10 pairs 40.0 9.4 76.2 95.0 38.0 76.2 11.1 2.25 Kg
MC322 MC.32.2 Double clamp 10 pairs 41.0 9.4 76.2 171.0 38.0 76.2 11.1 3.82 Kg
MC3216 MC.32.16 16 bay clamp 1 pair 72.0 76.2 40.0 34.0 76.2 1211.0 38.5 77.0 11.0 3.80 Kg
MCN32 MC.N.32 Stacking nut 50 13.0 71.5 M10 x 1.5 1.99 Kg
MCS32 MC.S.32 Stacking stud 50 38.0 22.0 4.0 M10 x 1.5 0.90 Kg
MCWP32 MC.WP.32 Weld plate 10 17.5 32.0 12.0 8.0 32.0 11.0 0.70 Kg
MCSB32 MC.SB.32 Standard bolt 50 M10 x 1.5 1.30 Kg
MCB32MO MC.B.32.MO Mounting adaptor 1 40.0 58.0 10.7 0.26 Kg

Part number Supersedes Description Pack Dimensions (mm) Pipe size Pack
quantity weight
A B (mm) OD
MCG3210 MC.G.32.10 Split bush 10 59.0 44.5 15-16 5/8 1.10 Kg
MCG3212 MC.G.32.12 Split bush 10 59.0 44.5 18-20 3/4 1.10 Kg
MCG3216 MC.G.32.16 Split bush 10 59.0 44.5 25 1 1.00 Kg
MCG3218 MC.G.32.18 Split bush 10 59.0 44.5 28-30 1.00 Kg
MCG3220 MC.G.32.20 Split bush 10 59.0 44.5 32-34 1 1/4 0.80 Kg
MCG3224 MC.G.32.24 Split bush 10 59.0 44.5 35-38 1 1/4 0.80 Kg
MCG3232 MC.G.32.32 Split bush 10 59.0 44.5 50 2 0.40 Kg
MCG326 MC.G.32.6 Split bush 10 59.0 44.5 10 3/8 1.30 Kg
MCG328 MC.G.32.8 Split bush 10 59.0 44.5 12-14 1/2 1.20 Kg
MCG3214 MC.G.32.14 Split bush 10 59.0 44.5 22 7/8 1.00 Kg
MCG3226 MC.G.32.26 Split bush 10 59.0 44.5 42 0.60 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

How to ‘build’ Multiclamp

1 2 3

4 5 6

7 8 9

Reservoir equipment
215
 Reservoir Equipment

Inline Check Valves

Specification

Construction:
Steel UNI 5105.
Ball and spring:
Chrome finished steel.
Retainer:
Nylon.
Flow rates:
From 20 l/min to 150 l/min.
Max. working pressure:
350 bar. Circuit symbol
Valve crack pressures:
0.35 and 4.5 bar.

Installation Details

A B A/F HEX

Thread

Technical Data Ordering Information

Pressure Drop Flow Curves Standard products table

Cracking
Flow (US GPM) Flow pressure Thread A B Weight
Part number l/min bar G mm mm Kg
0 5 11 16 21 26 31 37 42 47 53 58 2301 20 0.35 1
/4 54 19 0.09
4.0 58
2302 2302 30 0.35 3
/8 66 24 0.17
3.5 2303 50 0.35 /2
1
77 30 0.32
2304 2304 100 0.35 3
/4 88 36 0.48
3.0 43.5
2301 2305 2305 150 0.35 1 108 46 0.99
Δp (PSID)

2.5
Δp (bar)

2303 2311 20 4.50 1

/4 54 19 0.09
2.0 29 2312 30 4.50 3
/8 65 24 0.17
2313 50 4.50 1
/2 77 30 0.32
1.5
2314 100 4.50 3
/4 88 36 0.48
1.0 14.5 2315 150 4.50 1 108 46 0.99
0.5
0 0
0 20 40 60 80 100 120 140 160 180 200 220
Flow (l/min)

216 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 32
 Reservoir Equipment

Single Station Gauge Isolator Valves

Specification

Construction:
Single Station: Cast iron and steel. Knurled
aluminium knob with ‘Twist to lock’ or ‘push
to read’ type.
Max. working pressure:
350 bar.
Port size:
Single Station: G1/4.
Weight:
Single Station: 0.90 Kg.

Single Station Installation Details

80.0 27.0

HEX nut 38.0 A/F

13.0

G
91.0
90.0

21.0

27.7

DR P
57.0

Circuit symbol
36.0

29.0

G1/4 TYP
3 positions

20.0 SQ 28.0 26.0

54.0

Operation Details

Single Station

Ordering Information
Standard products table
Part number Description Weight
GI1486 Single station gauge isolator “twist to lock” type 0.90 Kg
GI1414 Single station gauge isolator “push to read” type 0.90 Kg

Reservoir equipment
217
 Reservoir Equipment

63mm Dia. Pressure Gauges

Specification

Construction: Process temperature:

Case: Natural finish stainless + 60°C maximum.
steel. Accuracy:
Window: Non-splintering clear 1.6% FSD.
acrylic glass.
Movement: Cu alloy. Wetted parts connector:
Dial: White plastic, with Copper alloy.
pointer stop pin. Bourdon tube:
Pointer: Black plastic. < 60 bar = Cu alloy, C-type,
Liquid filling: soft soldered.
Glycerine 99.7%. > 60 bar = Cu alloy, helical type,
soft soldered.
Working pressure:
Max 75% of the full scale value.

Ordering Information
Mounting Stem Detail
25 Bottom Connection
23 Part number Supersedes Pressure range Connector type
Symbol PGB0631010 PGB.0631.010 0-10 bar G1/4 Bottom
15
PGB0631016 PGB.0631.016 0-16 bar G1/4 Bottom
2 PGB0631025 PGB.0631.025 0-25 bar G1/4 Bottom
PGB0631040 PGB.0631.040 0-40 bar G1/4 Bottom
PGB0631060 PGB.0631.060 0-60 bar G1/4 Bottom
Ø5

PGB0631100 PGB.0631.100 0-100 bar G1/4 Bottom

Ø9.5

Note: It is recommended that all PGB0631160 PGB.0631.160 0-160 bar G1/4 Bottom
glycerine gauges should be mounted PGB0631250 PGB.0631.250 0-250 bar G1/4 Bottom
Snubber fitted in the vertical position with gauge PGB0631400 PGB.0631.400 0-400 bar G1/4 Bottom
G1/4 (1/4” BSP) case relief valve uppermost. Pressure PGB0631600 PGB.0631.600 0-600 bar G1/4 Bottom
14 A/F HEX range up to 1000 bar available. PGB0631004 0-4 bar G1/4 Bottom
PGB.0631.004

Installation Details
Panel Mounting
Bottom Connection Panel Mounting (Lower Back) Part number
PGC0631010
Supersedes
PGC.0631.010
Pressure range
0-10 bar
Connector type
G1/4 Panel
D1 b b2 PGC0631016 PGC.0631.016 0-16 bar G1/4 Panel
e D1 b
° e PGC0631025 PGC.0631.025 0-25 bar G1/4 Panel
45
PGC0631040 PGC.0631.040 0-40 bar G1/4 Panel
PGC0631060 PGC.0631.060 0-60 bar G1/4 Panel
ØD2

PGC0631100 PGC.0631.100 0-100 bar G1/4 Panel

ØD2

a SW
PGC0631160 PGC.0631.160 0-160 bar G1/4 Panel
h
PGC0631250 PGC.0631.250 0-250 bar G1/4 Panel
G

SW PGC0631400 PGC.0631.400 0-400 bar G1/4 Panel

10
9±

PGC0631004 PGC.0631.004 0-4 bar G1/4 Panel

1

G PGC0631600 PGC.0631.600 0-600 bar G1/4 Panel

Dimensions (mm) Bottom Connection

a b
±0.5
D1 D2 e G h
±1
SW Weight
Kg
Panel Mounted (3-hole flange)
13 32 68 62 6.5 G1/4 54 14 0.21 Part number Supersedes Pressure range Connector type
PGF0631060 PGF.0631.060 0-60 bar G1/4 Panel Flange
Dimensions (mm) Panel Mounting (Lower Back) PGF0631100 PGF.0631.100 0-100 bar G1/4 Panel Flange
PGF0631160 PGF.0631.160 0-160 bar G1/4 Panel Flange
b b2 D1 D2 e G SW Weight
±0.5 ±1 Kg PGF0631250 PGF.0631.250 0-250 bar G1/4 Panel Flange
32 56 68 62 6.5 G1/4 14 0.21 PGF0631400 PGF.0631.400 0-400 bar G1/4 Panel Flange
PGF0631004 PGF.0631.004 0-4 bar G1/4 Panel Flange
Note 1: Panel cut-out 64.5 ±0.5
Note 2: 13mm on the outside radius required to allow for fixing clamp. PGF0631010 PGF.0631.010 0-10 bar G1/4 Panel Flange
PGF0631016 PGF.0631.016 0-16 bar G1/4 Panel Flange

Panel Mounted (3-hole flange) PGF0631025

PGF0631040
PGF.0631.025
PGF.0631.040
0-25 bar
0-40 bar
G1/4 Panel Flange
G1/4 Panel Flange
ØD2
Note 1: Gauge dimensions as for PGF0631600 PGF.0631.600 0-600 bar G1/4 Panel Flange
ØD1
panel mounting option above
with flange as shown below. Note 1: Part numbers featured with bold highlighted codes will ensure
Note 2: Panel cut-out for 3-hole a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to
0°

12

mounting 67±0.3.
contact Parker Filtration for availability.
12

0°

*Note 3: Any subsequent changes to gauge accuracy will be notified.

Dimensions (mm)
D1 D2 D3

75 85 3.6
ØD3

218 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 32
 Reservoir Equipment

100mm Dia. Pressure Gauges

Specification

Construction: Process temperature:

Case: BS 304 S15 stainless + 60°C maximum.
steel. Accuracy:
Window: Acrylic. 1.0% FSD.
Movement: Brass.
Dial: White aluminium. Wetted parts connector:
Pointer: Black aluminium. Copper alloy.
Liquid filling: Bourdon tube:
Glycerine 98%. < 100 bar = Cu alloy, c-type,
soft soldered.
Working pressure: > 100 bar = stainless steel 1.4571,
Full scale value. helical type, brazed.

Ordering Information
Mounting Stem Detail

43
Bottom Connection
Part number Supersedes Pressure range Connector type
39 Symbol PGB1001250 PGB.1001.250 0-250 bar G1/2 Bottom
25 PGB1001400 PGB.1001.400 0-400 bar G1/2 Bottom
Ø17.5

PGB1001010 PGB.1001.010 0-10 bar G1/2 Bottom

5 PGB1001016 PGB.1001.016 0-16 bar G1/2 Bottom
Ø6

PGB1001025 PGB.1001.025 0-25 bar G1/2 Bottom

PGB1001040 PGB.1001.040 0-40 bar G1/2 Bottom
Note: It is recommended that all PGB1001060 PGB.1001.060 0-60 bar G1/2 Bottom
glycerine gauges should be mounted PGB1001100 PGB.1001.100 0-100 bar G1/2 Bottom
Snubber fitted
in the vertical position with gauge PGB1001160 PGB.1001.160 0-160 bar G1/2 Bottom
G1/2 (1/2” BSP) case relief valve uppermost. PGB1001600 PGB.1001.600 0-600 bar G1/2 Bottom
22 A/F HEX
PGB10011000 PGB.1001.1000 0-1000 bar G1/2 Bottom

Installation Details
Panel Mounting
Bottom Connection Panel Mounting (Lower Back) Part number
PGE1001010
Supersedes
PGE.1001.010
Pressure range
0-10 bar
Connector type
G1/2 Panel
D1 b b2 PGE1001016 PGE.1001.016 0-16 bar G1/2 Panel
e D1 b
° e PGE1001025 PGE.1001.025 0-25 bar G1/2 Panel
45
PGE1001040 PGE.1001.040 0-40 bar G1/2 Panel
PGE1001060 PGE.1001.060 0-60 bar G1/2 Panel
ØD2

PGE1001100 PGE.1001.100 0-100 bar G1/2 Panel

ØD2

a SW
PGE1001160 PGE.1001.160 0-160 bar G1/2 Panel
h
PGE1001250 PGE.1001.250 0-250 bar G1/2 Panel
G

SW PGE1001400 PGE.1001.400 0-400 bar G1/2 Panel

10
9±

PGE1001600 PGE.1001.600 0-600 bar G1/2 Panel

1

G PGE10011000 PGE.1001.1000 0-1000 bar G1/2 Panel

Dimensions (mm) Bottom Connection

a b D1 D2 e G h SW Weight Panel Mounted (3-hole flange)
±0.5 ±1 Kg
Part number Supersedes Pressure range Connector type
15.5 48 107 100 8 G /21
87 22 0.80
PG.1001250 PGF.1001.250 0-250 bar G1/2 Panel Flange
Dimensions (mm) Panel Mounting (Lower Back) PGF1001400 PGF.1001.400 0-400 bar G1/2 Panel Flange
b b2 D1 D2 e G SW Weight PGF1001010 PGF.1001.010 0-10 bar G1/2 Panel Flange
±0.5 ±1 Kg PGF1001016 PGF.1001.016 0-16 bar G1/2 Panel Flange
48 81.5 107 100 8 G1/2 22 0.80 PGF1001025 PGF.1001.025 0-25 bar G1/2 Panel Flange
PGF1001040 PGF.1001.040 0-40 bar G1/2 Panel Flange
Note 1: Panel cut-out 102 ±1.0
PGF1001060 PGF.1001.060 0-60 bar G1/2 Panel Flange
Note 2: 13mm on the outside radius required to allow for fixing clamp.
PGF1001100 PGF.1001.100 0-100 bar G1/2 Panel Flange

Panel Mounted (3-hole flange) PGF1001160

PGF1001600
PGF.1001.160
PGF.1001.600
0-160 bar
0-600 bar
G1/2 Panel Flange
G1/2 Panel Flange
ØD2
Note 1: Gauge dimensions as for PGF10011000 PGF.1001.1000 0-1000 bar G1/2 Panel Flange
ØD1
panel mounting option above
with flange as shown below. Note 1: Part numbers featured with bold highlighted codes will ensure
Note 2: Panel cut-out for 3-hole a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to
0°

12

mounting 104±0.5.
contact Parker Filtration for availability.
12

0°

*Note 3: Any subsequent changes to gauge accuracy will be notified.

Dimensions (mm)
D1 D2 D3
ØD3 116 132 4.8
Reservoir equipment
219
Notes

220 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Portable Particle Counter

LaserCM
Fluid Condition Monitoring

Fluid condition monitoring

221
 Portable Particle Counter

LaserCM
Features & Benefits

Test time: 2 minutes Data entry allows individual equipment test log details
to be recorded.
Particle counts: 2+, 5+, 15+, 25+, 50+ and 100+
microns Data retrieval of test results from memory via hand
set display.
4+, 6+, 14+, 21+, 38+ and 70+
microns(c) Automatic test cycle logging of up to 300 tests can
be selected via hand set display.
International codes: ISO 7-22, NAS 0-12
Totally portable, can be used as easily in the field as
Data retrieval: Memory access gives test search in the laboratory.
facility
Automatic calibration reminder.
Max. working pressure: 420 bar Instant, accurate results achieved with a 2 minute
Max. flow rate: 400 I/min when used with system test cycle.
20 Sensors. Higher with single Data entry allows individual equipment footprint record.
point sampler (consult Parker)
Data graphing selectable via the integral printer.
Working conditions: LaserCM will operate with the
Auto 300-test cycle logging via LCD handset input.
system working normally
RS232 serial port computer interface.
Computer compatibility: Interface via RS232 connection
@ 9600 baud rate. Limit level output to control peripheral equipment such
as off-line filtration via internal relay limit switches.
Special ‘diagnostics’ are incorporated into the LaserCM Auto-testing allows for the conducting of automatic
microprocessor control to ensure effective testing. sequencing tests on flushing systems for example.
Routine contamination monitoring of oil systems with Optional bar code swipe wand to allow handset
LaserCM saves time and saves money. data loading.
Contamination monitoring is now possible while Worldwide service and technical support.
machinery is working - LaserCM saves on Re-calibration - Annual certification by an approved
production downtime. Parker Service Centre.

Typical Applications

Construction machinery
Industrial plant
Hydraulic equipment & system
manufacturers
Research & testing institutes
Offshore & power generation
Marine
Military equipment applications

Parker LaserCM Portable Particle

Counter.
With 15 years experience in manufacturing the
world’s best selling ‘white light’ portable particle
counter – CM20, the progression to the LaserCM
with its opto-mechanical, continuous wave single
point source laser (SPSL) is both a natural and
customer driven development.

222 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 33
Specification

Automatic Particle Counters (APC’s), have been widely

used for many years in condition monitoring of hydraulic
fluids. However, it is only recently that APC’s have become
flexible enough to enable the instruments to be taken out of
the laboratory and used on-line in order to obtain the most
credible form of results.
Unusually, the move from fixed laboratory use, to portable field
use has not been at the expense of accuracy or user flexibility,
but has actually enabled the instruments to be used over a
wider range of applications and situations.
The most common monitoring technique used in APC’s is that
of light obscuration or light blockage. Here, a focused light
source is projected through a moving column of oil, (in which
the contaminants being measured are contained), causing an
image of the contaminant to be projected on to a photo diode
cell, (changing light intensity to an electrical output). Laser Optical Sensing

The electrical output of the photo diode cell will vary in

Core technology that proves itself in LaserCM
accordance with the size of the particles contained in the
column of oil; the larger the particle, the bigger the change in The LaserCM portable particle counter features
the photo diode electrical output. microprocessor controlled optical scanning for accurate
contaminant measurement with a calibration range from ISO 7
On-line APC’s must be able to test the oil sample at whatever
to ISO 22 with no counter saturation.
cleanliness it is delivered to the machine. Parker therefore had
to develop technology to ensure the on-line APC was able to
test a sample without the conventional laboratory technique How does LaserCM work?
which requires dilution - a practice that would have been
– The particles are measured by a photo diode that converts
simply impossible with a portable unit.
light intensity to a voltage output which is recorded against
By careful design and window sizing, gravimetric levels as time.
high as 310mg of dirt per litre, (equivalent to up to 4 million
– As the particle moves across the window the amount of
particles >5 micron per 100 ml), can be achieved without
light lost is proportional to the size of the particle. This
making the instrument susceptible to counter saturation.
reduction in voltage is measured and recorded.
These high saturation point on-line APC’s, whilst losing none
– This “voltage” lost relates directly to the area of the particle
of the accuracy of their laboratory counterparts, enable
measured, is changed into a “positive” voltage and then in
particle counting to be carried out quickly and accurately.
turn changed into a capacitance value.
– This value is counted and stored in the LaserCM computer
in one of 6 channels, >2, >5, >15, >25, >50 and >100µ
according to particle size.
– Readouts are displayed on the hand-held LCD in the
accepted ISO and NAS standards ready for hard copy
printing or RS232 computer download.
– The on-board computer allows storage of up to 300
test results.
A focused light source is
projected through a moving
column of oil.

Fluid condition monitoring

223
 Portable Particle Counter

LaserCM
Specification

Description

32
Lexan, structural foam and ABS case
ABS handheld display

126
Mechanical composition – Brass,
plated steel, stainless steel and aluminium
258
Fluorocarbon seals
Perfluoroelastomer seals

28
Nylon hoses (kevlar braided microbore)
Stainless steel armoured hose ends
1.2m fluid connection hose

249
System 20 sensors. Higher with single point sampler
Rechargeable battery pack
12Vdc power supply
Fast blow fuse
240
Unique optical scanning system
Bonded glass optical window enclosed in SS plate
Micron channels analysis (2+,5+,15+,25+,50+ & 100+)
Analysis range ISO 7 to 22 incl. (NAS 0 to 12)
32 character dot matrix LCD. Alpha numeric keypad
Data retrieval
Calibration to ISO standards*
Viscosity range 2 to 100 cSt. 500 cSt.with SPS
Operating temp.+5 to +80°C
Ambient temp.+5 to +40°C
2 minute test completion time
Memory store – 300 test memory Commissioning Kit
12Vdc regulated power supply input
Battery operated 6 x 1.5 D cells Power supply
Limit socket, fuse Datum &
& jack plug Screwdriver cable assy
Phosphate Ester group compatibility
Mineral oil & petroleum based fluid compatibility
Up to 420 bar (6000 psi)
Integral 16 column printer
RS232 computer interface
Astra board case weight – (Kg)
Unit weight – (Kg)
DATUM software and cable link pack
Weather protector cover
CE certified
Auto logging

*Note: In compliance with international standards, all Parker portable particle counters can
meet the ISO Medium test dust standards. The LaserCM’s, in addition to the complete range
of Condition Monitoring products, are capable of achieving certification to ISO 4406:1999 and
with traceability to ISO 11171 for SRM 2806, via ISO 11943.

Power lead, Batteries &

Instruction
printer ribbon, printer reel
Re-chargeable manual & bar
battery pack code software bar code pen &
weather cover

224 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 33
Operation

Switch On Start Test

Operating the Parker LaserCM is as simple as pressing Understanding MTD

the start button and turning the dial. The test procedure is
ACFTD (Air Cleaner Fine Test Dust) was formatted in the
automatic and in the case of the LaserCM takes no more than
1960’s, but is no longer being produced. The obsolescence of
2 minutes to complete.
this dust has led to the adoption of a new dust MTD.

LaserCM makes the difference in industry MTD (Medium Test Dust) having a particle size distribution
close to ACFTD was selected as a replacement. However,
Fully accredited to BS EN 60825:1992 and IEC 60825-1 (safety MTD produced results somewhat different to ACFTD, so the
of laser products) Standards, accredited to USA Standards and NIST (National Institute of Standards & Technology) undertook
achieving full ISO certification. LaserCM offers users advanced a project to certify the particle size distribution of ISO MTD.
laser technology, a fast, dynamic and on-line 2 minute system
test cycle. A LaserCM Aggressive Fluids model is also available, The result was particle sizes below 10µm were greater than
suitable for monitoring corrosive fluids such as phosphate ester previously measured.
based lubricants used in commercial aviation.
Particles sizes reported based on NIST would be represented
as µm (c), with “c” referring to “certified”. Therefore the CM20
MTD calibration reported sizes are as follows:
Laser CM20 MTD Calibration variants are certified via a primary ACFTD MTD
ISO 11171 calibrated automatic particle counter. All MTD Laser 2µ 4µ (c)
CM20’s achieve ISO 4406:1999 criteria, via ISO 11943. 5µ 6µ (c)
15µ 14µ (c)
25µ 21µ (c)
LCM20 50µ 38µ (c)
Using SPS 100µ 70µ (c)
MTD offers true traceability, improved particle size accuracy
and better batch to batch reproduction.

Fluid condition monitoring

225
 Portable Particle Counter

LaserCM
Why On-Site Fluid Contamination Monitoring

Certification of fluid cleanliness levels.

Early warning instrument to help prevent
catastrophic failure in critical systems.
Immediate results with laboratory accuracy.
To comply with customer cleanliness
requirements and specifications.
New equipment warranty compliance.
New oil cleanliness testing.

Datum Data Management

Datum, dedicated software, provides the link between

a Laser CM20, System 20 EM20 or the H2Oil - Water
in Oil and your computer management system.

Features:
Windows based, Icon driven program 16-column printer for hard copy data. A feature of the
LaserCM is the on-board printout data graphing option
Full graphic output developed to support predictive maintenance procedures.
Tables/results download
Trend analysis and predictive maintenance Laser CM Test
Auto test communication allows Datum to control ON LINE TEST
particle counter testing and water in oil monitoring TEST NUMBER 022

Certification creator using downloaded data Laser CM Test D M Y

Date 04-03-06
Customer customised fields ON LINE TEST Time
NAS CLASS:
15-52
7
TEST NUMBER 022
Count / 100ml
D M Y
Date 04-03-06 4/6µ (c) 789157
Time 15-52 6/14µ (c) 31250
ISO: 20/15/09 NAS CLASS 7
14/21µ (c) 250
Count / 100ml NAS CLASS 3
>4µ (c) 820721 21/38µ (c) 50
>6µ (c) 31564 NAS CLASS 3
>14µ (c) 314 38/70µ (c) 14
>21µ (c) 64 NAS CLASS 4
>38µ (c) 14 >70µ (c) 0
>70µ (c) 0 NAS CLASS 0
NOTES NOTES

ISO 4406 - 1996 Correlation to NAS 1638

(MTD calibration comes under
ISO 4406 - 1999 revised
standards)

226 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 33
Introducing the new LCM ‘Classic’

There is a new addition to the proven range – the LCM Classic LCM20
‘Classic’. Only available from Parker, the ‘Classic’ retains all the
technology that made the LaserCM one of the most accurate,
reliable and popular portable particle counters available.

Our design engineers have re-configured the LaserCM

specification in a way that has reduced our manufacturing
costs. These savings have been passed onto LCM ‘Classic’
customers.

How have we done this? Calibration

certificate
First we talked to our existing customers and then to the engineers
and maintenance operatives to find out the features that make
the LaserCM a unique predictive maintenance instrument.
Empty battery pack
Then, we removed peripheral items such as the aluminium
case and all the accessories, so a customer receives the
monitor, with a CD user guide, professionally and securely
boxed. One thing that has not altered is laser accuracy and CD user guide
Carton box supplied
laser reliability. Our in-house software engineers have re- to house kit
configured the EPROM, removing Data programming, User
ID, Automatic Testing, Data retrieval, Alarm level settings, the
barcode pen and Graph printing functions to reduce costs
still further without in any way reducing the efficiency of the
monitor. The LCM ‘Classic’ is an instrument to be proud of.

Ordering Information (LaserCM and ‘Classic’ LaserCM)

Standard products table

Part number Supersedes Description

LCM202022 N/A MTD calibrated

LCM202026 N/A Classic unit - MTD calibrated
B84702 B.84.702 Printer paper (5 rolls)
P843702 N/A Printer ribbon
B84729 B.84.729 12Vdc power supply
B84609 B.84.609 Re-chargeable battery pack
P849613 N/A Weather protector cover
B84779 B.84.779 Datum software pack
B84708 B.84.708 Cable and adaptor
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Product configurator
Model Fluid type Options

LCM2020 2 Hydraulic mineral 1 ACFTD calibrated

LCM2020 6 Skydrol 2 MTD calibrated
3 ACFTD calibrated + bar code pen
4 MTD calibrated + bar code pen
5 Classic unit - ACFTD calibrated
6 Classic unit - MTD calibrated

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

227
Notes

228 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Offline Sampling

Universal Bottle Sampler

Fluid condition monitoring

229
 Offline Sampling

Universal Bottle Sampler

Features & Benefits

Simple operation
Efficient testing procedure
Clean and contamination free sampling
Available for both mineral based and aggressive fluids
Further advances the LCM20’s flexibility into laboratory
bottle sampling environments
Can accept various different sized bottles
Minimal working parts
Internal auto setting fuse for overload protection
Simple maintenance procedures

Typical Applications

Batch sampling
Aircraft rig certification
Oil research
Laboratory testing
Transfer line monitoring

Providing The Dynamic Link To All Portable

Particle / Water Counters.
The UBS off-line, has microprocessor technology to recognise
and adjust to the connecting monitor including the LaserCM
and Water in Oil Monitor.

Simple To Use UBS

The oil sample is drawn into the UBS Off-line where it is
secured, free from further contamination, in a bottle together
with a clean waste bottle by a peristaltic, self-priming pump.
Simple operation and efficient testing are assured once the UBS
Off-line is connected to any of the CM monitors, and powered
up using it’s own power source. The oil sample requires
agitation and de-gassing before carrying out the contamination
test. A de-gassing kit option is available and consists of a
vacuum chamber and pump. (Standard with UBS.9002)

230 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 34
Specification

Description
Viscosity range 2 to 250 cSt
Operating temp +5 to +80°C
Test time 2m15s / 4m15s (Flush 2m)
12 Vdc power supply
Extruded aluminium construction
Unit weight - (Kg)
Mineral oil and petroleum based compatibility
Phosphate Ester group compatibility
CE certified
Military approved
Manual operation
Bottle pack
De-gassing chamber
Manual
Sample tube pack
Interface cable to LCM20, H2Oil etc.

Installation Details
319
151

165
11

147
179 120 CTRS
80 CTRS
100 CTRS

Fluid condition monitoring

231
 Offline Sampling

Universal Bottle Sampler

Usage Specifications

System Flow Rate

Samples are best taken from a point in the system where
the flow is TURBULENT (Reynolds No. greater than 4000).
The turbulent flow creates a mixing action. Where flow is
streamline or LAMINAR, larger particulate may tend to settle
toward the lower pipe surface and not be sampled.

System Condition Changes

Changes in the system operating condition, flow, temperature,
pressure or vibration, can result in previously sedimented
contaminant being retrained into the flowing oil. It is also
possible that these changes may cause partially contaminated
filter elements to shed particulate into the system. Samples
Sampling points should enable extraction of a sample
should, therefore, be extracted when the system is in a steady
without changing the system’s condition. Fine control needle
state condition and the result less likely to be distorted by
valves are not desirable, as they have a tendency to silt up
contaminant peaks.
under some operating conditions, causing the distribution of
There are a number of proprietary sampling valves available contaminants in the fluid to be changed. The sampling port
which adhere to good theoretical principles. However, they should be protected to maintain cleanliness and thoroughly
do tend to generate a level of precision and cost which is flushed before collecting the sample for analysis. Allow
unnecessary for trend monitoring. sufficient airspace in the bottle to enable 80% fill.

Bottle Cleanliness
It is preferable that bottles have sealing screw caps and
both parts are cleaned to a suitable level in accordance with
lSO3722.
The bottle should not contain more than one tenth the number
of particles per 100mI than are expected to be monitored.
Standard Parker bottles are supplied clean to lSO13/11 (NAS
Class 4) and should not be used to accurately count oils
cleaner than ISO 15/12 (NAS Class 6) although they may be
used for “trend monitoring” at lower levels.
The bottle should remain capped until time of sample filling
and re-capped immediately afterwards.

Sample Mixing
Sedimentation of contaminant in a sample will occur, the
rate of which is dependent upon both fluid and particle
characteristics.
Samples should be analysed, without delay, once agitated
and de-gassed.

B.89.911 x 50 = B.89.910 B.89.907

232 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 34
Ordering Information

Standard products table

Part number Description
UBS9002 Universal bottle sampler (includes aluminium case and accessories)
UBS9003 Universal bottle sampler
UBS9004 Aggressive universal bottle sampler
UBS9005 Aggressive universal bottle sampler (Includes aluminium case and accessories)

Accessories
Part number Supersedes Description
B89907 B.89.907 Sample bottle pair with plain cap
B89911 B.89.911 Sample bottle pair with oil extraction hose
B89910 B.89.910 Sample bottle pack (50 x B89911)
S840054 N/A Power supply and socket
S890005 N/A De-gassing chamber and pump
B89603 B.89.603 De-gassing chamber only
B89902 B.89.902 Cable and adaptor
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

233
Notes

234 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Single Point Sampler

SPS

Fluid condition monitoring

235
 Single Point Sampler

SPS
Features & Benefits

The Single Point Sampler provides a means to Capable of working with a CM20 or H2Oil
connect a CM20 or H2Oil to a single pressure test connected into a system via the standard one
point and balance the differential pressure across metre extension hose kit
the system, to provide a controlled flow of oil into Suitable for use with mineral and biodegradable
the monitor and away into a waste oil receptacle. oils, petroleum based and phosphate ester fluids
Lightweight, compact and easy to use design Phosphate ester version utilises the 5/8” BSF
HSP style fitting
Fingertip operated control valve even at high
pressures Designed so that it meets the lowest possible
level of magnetic permeability
420 bar (6,000PSI) rated
Supplied with accessories kit
Facilitates testing from large diameter pipes
It will maintain the set flow rate between upper
Capability to test up to 500cSt viscosity oils
and lower limits within a 100 bar inline pressure
(pressure permitting)
change
Pressure compensated flow control mechanism
Clear product identification to ensure that it is
Possible to control the valve with the same level connected correctly. (i.e. downstream of the
of accuracy whether the device is operating at CM20 or H2Oil)
high or low pressure
Capable of allowing a flow rate in excess of
10ml/min when operating at any viscosity within
the product specification
Suitable for fluid temperatures from +5°C to +80°C
(+41°F to +176°F)
High quality polished finish. (stainless steel/
aircraft grade aluminium)

Connection Instructions

1. Ensure valve is closed (A).

System 2. Connect P2 on monitor (B) to P2 on Single Point Sampler (SPS) (C).
3. Connect drain line on SPS (D).
(F) (D) 4. Connect P1 of monitor (E) to the system (F).
Prs. 5. The SPS is ready to operate.
R
6. Open valve (A) slowly until the oil flows continuously from the drainline (D).
(A) 7. Switch on monitor and begin testing.

Single LCM20 Only

point
sampler Carry out flow test as shown in the manual. If test is showing below Δt 3.6°C then
carry out test as normal. If, however, test is above Δt 3.6°C then increase oil flow by
(C) turning valve (A) anticlockwise and then carry out flow test. Do this until Δt is below
3.6°C and carry out test as normal once this is achieved.
(E) P1 P2 (B)
WARNING! Ensure that SPS valve is closed and monitor is connected to the
Monitor SPS BEFORE connection to system.

236 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 35
Specification

Fluid compatibility: 123

Mineral oil and petroleum based fluids (standard version).
Aggressive fluid (dual seal version) for other fluids consult
Parker Hannifin.
Seals:
Fluorocarbon or Perfluoroelastomer.

53
Maximum working pressure: SWP 420 bar
420 bar (6000 psi).
Weight:
500 grams max. (Not including hoses).
Packaging standard: 80.0
Cardboard carton (military usage - plastic carry case).
Unit size:
45mm dia x 123mm long.
System connection:
Standard - minimess M16 (G1/4” BSP) with cap, P2
Aggressive - 5/8” BSF HSP.
Operating temp range:
+5°C to +80°C (+41°F to +176°F).
Storage temperature range:
-26°C to +80°C (-15°F to +176°F). Ø45.0
Construction:
Body: Aluminium BS 1470 – pressurised end stainless steel.
Finish: Anodised blue (standard version).
Anodised red (dual seal version).

Ordering Information

Standard products table

Product number Supersedes Description

SPS2021 N/A Mineral single point sampler

SPS2061 N/A Aggressive single point sampler
B84784 B.84.784 Mineral or aggressive bottle assembly
B84224 B.84.224 Mineral oil extension hose/coupling
B84225 B.84.225 Aggressive oil extension hose/coupling
B84788 B.84.788 Mineral oil waste hose
B84787 B.84.787 Aggressive oil waste hose
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

237
Notes

238 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Inline Sensors & Monitors

System 20

Fluid condition monitoring

239
 Inline Sensors & Monitors

System 20
Features & Benefits

Covering a wide range of flow rates, fluid types

and applications, Parker’s System 20 sensors are
designed to be used with System 20 electronic or
analogue monitors, contamination monitors and the
H2Oil. Specially developed System 20 sensors are
available for use with aggressive fluids. (EPDM Seals)
System 20 monitors, combined with the inline
sensor, give the user accurate and instant
readings of flow, pressure and temperature
without the need to shut down the system.
For use with all mineral oils, water and water/oil
emulsions.
Analogue Monitor utilises 3 Day-Glo dial
gauges with a protective hinged cover.
Calibrated up to 380 l/min with dual scale bar/
psi & °C/°F. (US GPM also available)
EM20 Electronic Monitor gives a full digital
display.
Automatically calibrated for all 3 sizes of sensor.
Indicates line, differential and rising peak
pressure.
Easily scrolled from metric to US.
300 test memory.
Capable of downloading saved data to datum.

Typical Applications

Drilling equipment
Mining
Grinding and conveying
Industrial hydraulics
Mobile
Hydraulic system users need to ensure that lost
production is kept to the absolute minimum. To
ensure this, predictive maintenance and therefore
routine condition monitoring of major components
is essential.
System 20 inline sensors remain at the heart of
condition and contamination monitoring. Whether
you’re mining the coal, building the new bypass,
harvesting the crops, crossing the oceans or drilling
offshore – whatever the industry, System 20 represents
the premier system monitoring available today.

240 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 36
Specification: Sensors Installation Details

Construction: Size 0 Sensor

Machined steel body. Electroless nickel
coating to minimum depth of 40 microns
Brass/stainless steel internal components
Flow capacities:

56
All suitable for use with oil, water and water/
oil emulsion
Size 0 – 6-25 l/min (0.5-7US GPM)

ø30
Size 1 – 20-100 l/min (1.5-26 US GPM)
Size 2 – 80-380 l/min (5-100 US GPM)
Max. working pressure: 95
G 3 /8
420 bar (6000psi)
Capability: Size 1 Sensor
Reverse flow
Pressure drop:
At max. rated flow, Δp is 1.1 bar (mineral oil
fluid at 30 cSt 140 SSU).
66.5

Ports:
Size 0 – G3/8
Size 1 – G3/4
}
(SAE threads also available)
ø41

Size 2 – G11/4
Repeatability:
137 G 3 /4
±1% FSD
Accuracy:
Flow ±2.5% full scale deflection Size 2 Sensor

Weight:
Size 0 – 0.5kg (1.2lbs)
Size 1 – 3.5kg (8.4lbs)
73.5

Size 2 – 4.4kg (9lbs)

Aggressive Fluid Applications:
EPDM internal/external ‘O’-rings and seals
ø66.7

231.3 G11/4

Ordering Information

Standard products table

Product number Supersedes Size Flow range Fluid type Port
I/min threads
STI0144100 STI.0144.100 0 6-25 Mineral /83

STI1144100 STI.1144.100 1 20-100 Mineral /43

STI2144100 STI.2144.100 2 80-380 Mineral 11/4

STI0148100 STI.0148.100 0 6-25 Aggressive 3
/8
STI1148100 STI.1148.100 1 20-100 Aggressive 3
/4
STI2148100 STI.2148.100 2 80-380 Aggressive 11/4
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Note 3: Mobile Sensors are also available - Contact Parker

Fluid condition monitoring

241
 Inline Sensors & Monitors

System 20
A drilling equipment operation in a zinc mine has had System System 20 Saving £325,000 A Day Lost Production
20 installed for several years.
The mining industry puts a considerable demand on
hydraulics and there are others such as agricultural machinery,
System 20 Saving £50,000 Pump Damage harvesters or tractors and, for example, cement manufacturing
plants that are equally demanding of hydraulic efficiency.
Installing System 20 was part of a major restructuring plan
to improve mining effectiveness and profitability. Machine A grinding and conveying plant processes in excess of 1000
operator training and oil storage operative training were tons of ore per day in the manufacture of cement products.
essential elements of the plan. Prior to this investment, pump A days lost production costs £32,000. After one year of
terminal damage could cost £10,000 for a replacement, over operation the Plant Engineers decided to invest in System 20
£1000 service costs and up to £39,000 in lost production. equipment, strategically placed to allow the Engineers to ‘fault-
Add to this the difficulties of the mine’s geography and it’s find’ the major components quickly and easily. The result is that
easy to see the problems that have now been overcome. downtime and loss of production have been reduced by 80%.

System 20 Electronic Monitor

With System 20 inline sensors installed in a hydraulic system,
faults can be predicted and remedied, all you have to do is
connect the System 20 Electronic Hand Held Monitor (EM20).
Designed to display flow, temperature, differential, rising peak
and line pressure, System 20 Electronic can also calculate
hydraulic power (kW and hp.) at a given point in a system to
establish efficiency and power consumption.
System 20 electronics versatility does not end there. The
EM20 is automatically calibrated for all System 20 inline
sensors using water or oil and can display in l/min, US GPM,
bar, psi and kg/cm2.
Battery powered and
completely portable, System 20 -The Proven System
the EM20 displays For operators of industrial and mobile machinery who
readings on the LCD recognise the benefits of installing System 20 in a hydraulic
and can store under system, the System 20 hand-held analogue monitor offers
a test number. Data significant advantages, particularly in intrinsically safe
can be downloaded via applications. Like the System 20 electronic, the analogue
an RS232 connection monitor is completely portable and can be connected
to Datum. A sealed immediately to a purpose-designed inline System 20 sensor
keyboard and fingertip but requires no power source.
control make the unit
maintenance free and The analogue monitor will then - provide the user with an
simple to use anywhere. accurate and repeatable analysis of system flow, pressure and
temperature - without having to stop the machine.

System 20 -The Key To Predictive Maintenance Designed as a sealed assembly requiring no routine
maintenance or adjustment, analogue monitors are suitable for
The risk of fluid contamination by intrusive test devices use with all mineral oils, water/oil emulsions and water.
is eliminated. Using System 20 Sensors and the monitor
together, hydraulic fluids need never be disturbed. The The lightweight monitor has
monitoring procedure takes only a matter of minutes. With 3 dayglo dial gauges and
one System 20 monitor a user can check a complete fleet features a protective hinged
of vehicles or a factory full of hydraulic plant equipment. cover. The flow scale features
Predicting a problem means it can be put right as part of a double scale calibration - up
planned maintenance programme. Simple routine monitoring to 100 l/min and 380 l/min
with System 20 keeps machines running at a high level of and has excess flow and
operational efficiency. reverse flow indication.

242 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 36
Electronic Monitor Specification

Construction: Dimensions:
A sealed assembly requiring no routine maintenance or adjustment. The ABS Case is 291mm (11.46”) long, 105mm (4.13”) wide
Body moulding in Acrylonitrile Butadene Styrene (ABS). Key pad and 76mm (3”) deep overall.
moulded in silicon rubber. The monitor is suitable for use with all Weight:
mineral oils, water and water/oil emulsions. 1.4kg (3lbs).
LCD details Data logging:
Each test logs the following data:
Flow section: Test number; time & date; sensor size; media tested; flow rate,
The analogue flow scale has reverse flow and overflow indication and pressure & temperature.
provides a percentage reading of the digital full scale display
automatically calibrated for all sizes of System 20 Sensor. Data download:
The System 20 electronic monitor is capable of downloading
Pressure section: saved test data to a 16 column serial printer, or a compatible PC
Designed to indicate line pressure, differential pressure and rising via an RS232 connection using datum.
peak pressure. Connected to a System 20 Sensor it will monitor
pressure up to 420 bar (6000 psi) with an accuracy of ±1% FSD. Batteries:
6 x AA batteries.
Temperature section:
Temperature reading between -10°C and +110°C (0°F to 230°F). Re-calibration:
Annual certification by an approved Parker Service Centre.

Hose
retainers

1000mm (39.40in) nominal

Display
291mm (11.46in)

Function
keys

Purge
knob Battery
covers

105mm (4.13in) 76mm (3in)

Ordering Information

Standard products table

Product number Supersedes Description

EM209000 N/A System 20 electronic monitor

B84779 B.84.779 Datum download software
P653607 N/A Monitor and sensor carrying case
B85617 B.85.617 Dongle and cable assembly
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

243
 Inline Sensors & Monitors

System 20
Analogue Monitor Specification

Construction: Temperature section:

A sealed assembly requiring no routine maintenance or adjustment. The temperature dial gives readings between -10°C and +110°C
Body moulding in Acrylonitrile Butadene Styrene (ABS). The monitor (0°F to 230°F).
is suitable for use with all mineral oils, water and water/oil emulsions. Dimensions:
The monitor has 3 dayglo dial gauges and features a protective The ABS Case is 292mm (11.5in) long, 108mm (4.25in) wide and
hinged cover. 67mm (2.64in) deep overall.
Gauge details Weight:
1.4kg (3lbs).
Flow section: A viscosity chart is provided for mineral oil applications where
The flow scale has double scales for size 1 and 2 sensors only. monitoring is required at variable viscosities (cSt).
Calibrated up to 100 l/min (26 US GPM) and 380 l/min (100 US GPM).
The flow dial has excess-flow indication.
When the system is in reverse flow or when the high pressure lines to
the sensor have been transposed, a ‘below zero’ indication is given.
Pressure section:
Dial readings in both bar and psi up to 420 bar (6000psi).

Hose
retainers

System
flow rate

1000mm (39.4in) nominal

292mm (11.50in)

System
pressure

System
Purge temperature
knob

67mm
108mm (4.25in) (2.64in) 198mm (7.79in)

Ordering Information
Standard products table
Product number Supersedes Media type Flow readings Pressure readings Temperature readings
STM6211110 STM.6211.110 Oil l/min Dual scale bar/PSI Dual scale °C/°F
STM6611110 STM.6611.110 Oil US GPM Dual scale bar/PSI Dual scale °C/°F
STM6211120 STM.6211.120 Water l/min Dual scale bar/PSI Dual scale °C/°F
STM6611120 STM.6611.120 Water US GPM Dual scale bar/PSI Dual scale °C/°F
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Accessories
Product number Description
P653607 Monitor and sensor carrying case
P653106 Metal sensor protective cap

244 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 36
 Autoremote Particle Counter

MCM20

Fluid condition monitoring

245
 Autoremote Particle Counter

MCM20
Features & Benefits

The MCM20 is an online continuous particle Simple data formatting programme for trend
counter ensuring constant system monitoring analysis.
within defined parameters. User-friendly instrument improving familiarity
PC/PLC controlled and awareness of service and maintenance
Ensures constant system monitoring. personnel.
Can be pre-set to carry out tests at specific
intervals.
Can also be set up via detachable Handset.
Enclosed in a metal casing, with internal
workings on a removable chassis for ease of
service and calibration.
Connects permanently to a System 20 sensor
via 2 meter hose assembly (supplied).

Typical Applications

Test rigs
Construction machinery
Industrial plant
Hydraulic equipment & system manufacturers
Paper processing
Steel rolling mills
Military equipment application

The Parker MCM20

Proven as a portable particle counter able to operate in any condition,
MCM20 and its principles are available to users where continuous,
permanent installed monitoring is required.
The MCM20 utilises the latest laser diode method of particle counting
as per our standard LaserCM. The unit is enclosed in a metal casing
with access to the hydraulic connection, DC input power, fuse holder
and PC/PLC connection ports located on the front panel.
The internal workings are manufactured onto a removable chassis for
ease of service and calibration.

246 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 37
Specification

Test cycle time: Max. working pressure:

Variable between 30 seconds and 3 minutes. 420 bar.
Repeat test time: Minimum working pressure:
Continuous Mode or between 30 seconds and 1440 minutes 2 bar.
(24 Hours). Fluid compatibility:
Principle of operation: Mineral oil or petroleum based fluids.
Optical scanning analysis and measurement of actual particles. Aggressive fluid version also available.
Particle counts: Sample requirements:
6 channels either ACFTD or MTD calibrated. 0.3 – 1.5 DP bar (differential pressure) via approved inline
International codes: sampling concept.
ISO 7-22, NAS 0-12. System connection:
Storage temperature: Via System 20 inline sensors / single point sampler
-40°C to +80°C. Computer compatibility:
Operating temperature: Interface via RS 232 connection @ 9600 baud rate.
+5°C to +60°C (hydraulic oil temperature). Size/weight:
Unit control connection: 249mm x 254mm x 191mm / 8.75kg.
Terminal protocol via RS 232 or optional handset. Power requirement:
Data retrieval: 12 Vdc input. (1.25A (T) fuse). Regulated.
Local PC / PLC program or by optional handset. Installation:
Calibration: Back/base M6x1.0 mounting inserts (see annotated diagrams).
By accepted on-line methods confirmed by relevant Software:
International Standard Organisation procedures. LabView demonstration software.
Re-calibration:
Annual certification by an approved Parker Service Centre.

191
Over fixing screws

187
120 CTRS

‘Power on’
249

246

4 mounting hole green LED

M6 x 1.0
117
64

63

90 CTRS 220
1.25A fuse
182 254
M16 minimess adaptors
(P2 & P1)

Fluid condition monitoring

247
 Autoremote Particle Counter

MCM20
Communications Protocol

The comms protocol for the product

is as follows:
Baud rate = 9600
Data bits = 8
Parity = None
Stop bits = 1
Flow control = None

Labview Optional Remote Handset

Optional remote handset for

direct interface control.
Please consult Parker for
more information.

Customised
demonstration/software
for MCM operation.
Full graphic display.
Visual indication of limit
parameters.

Standard products table

Product number Supersedes Description

MCM202022 N/A MTD calibrated - mineral

MCM202022HS MCM20.2022.HS MTD calibrated - mineral - with handset
MCM202021 N/A ACFTD calibrated - mineral
MCM202021HS MCM20.2021.HS ACFTD calibrated - mineral - with handset
MCM202061 N/A ACFTD calibrated - aggressive
MCM202062 N/A MTD calibrated - aggressive
MCM202061HS MCM20.2061.HS ACFTD calibrated - aggressive - with handset
MCM202062HS MCM20.2062.HS MTD calibrated - aggressive - with handset
B94106 B.94.106 Handset (blue)
B94107 B.94.107 Handset (red)
B94802 B.94.802 2m mineral hose assembly
B94801 B.94.801 2m aggressive hose assembly

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

248 Parker Hannifin

Filter Division Europe
FDHB200UK. Section 37
 Online Particle Detector

IcountPD
Brochure: FDCB321UK
October 2007

Fluid condition monitoring

Online Particle Detector

IcountPD
Features & Benefits

Diagnostic Self Check Start-up Time: Flow Range through the device:
5 seconds 40 to 140 ml/min (Optimum Flow = 60ml/min)
Measurement Period: Online Flow Range via System 20 Inline Sensors:
5 to 180 seconds Size 0 = 6 to 25 l/min - (Optimum Flow = 15 l/min)
Reporting interval through RS232: Size 1 = 24 to 100 l/min - (Optimum Flow = 70 l/min)
0 to 3600 seconds Size 2 = 170 to 380 l/min - (Optimum Flow = 250 l/min)
Digital LED display update time: Required Differential Pressure across Inline Sensors:
Every second 0.4 bar (Minimum)
Limit Relay Output: Viscosity Range:
Changes occur +/- 1 ISO code at set limit (Hysteresis ON) or 10 to 500 cSt
customer set (Hysteresis OFF) Temperature:
4-20mA Output Signal: Operating Environment -20°C to +60°C (-4°F to +140°F)
Continuous Storage -40°C to +80°C (-40°F to +176°F)
Principle of operation: Operating Fluid 0°C to +85°C (+32°F to +185°F)
Laser diode optical detection of actual particulates. Working pressure:
Reporting Codes: 2 to 420 bar (30 to 6,000 PSI)
ISO 7 – 21, NAS 0 – 12, (AS 00 – 12 Contact Parker) Moisture sensor calibration:
Icount will also report less than ISO 7, subject to the statistical ±5% RH (over compensated temperature range of +10°C to +80°C)
uncertainty defined in ISO4406:1999, which is shown in the Operating humidity range:
RS232, reporting results as appropriate e.g “>6” 5% RH to 100% RH
Calibration: Moisture sensor stability:
By recognised on-line methods, confirmed by the relevant ±0.2% RH typical at 50% RH in one year
International Standard Organisation procedures. Certification:
Calibration Recommendation: IP66 rated
12 months EMC/RFI – EN61000-6-2:2001
Performance: EN61000-6-3:2001
+/- 1 ISO Code (Dependant on stability of flow) Materials:
Reproducibility / Repeatability: User friendly Abs construction.
Better than 1 ISO Code Stainless Steel hydraulic block.
Power Requirement: Viton seals.
Regulated 9 to 40Vdc Dimensions:
Maximum Current Draw: 182mm x 155mm x 86mm (7.2” x 6.1” x 3.4”)
150mA Weight:
Hydraulic Connection: 1.3kg (2.9lb)
M16 x 2 hydraulic test points (5/8” BSF for
aggressive version)

Independent monitoring of system IcountPD

contamination trends The Icount Particle Detector from Parker represents
Early warning LED or digital display indicators the most up to date technology in solid particle
for Low, Medium and High contamination levels. detection.
Moisture % RH LED indicator (optional) The design dynamics, attention to detail and
Cost effective solution in prolonging fluid life and moulding compactness of the permanently mounted,
reducing machine downtime. on-line particle detector
Visual indicators with power and alarm output module, combined with
warnings. on-board, laser based,
leading-edge technology,
Continuous performance for prolonged analysis
brings to all industries
Hydraulic, Phosphate Ester & Fuel fluid a truly revolutionary,
compatible construction particle detector as a
Self diagnostic software remarkable cost effective
Fully PC/PLC integration technology such as: market solution to
- RS232 and 0-5 Volt, 4-20mA fluid management and
(Contact Parker for other options). contamination control.

Fluid condition monitoring

3
 Online Particle Detector

IcountPD
Dimensions / Installation Details
mm
(inches)

(3.4”)
86
(1.9”)
49

(1.5”)
37
(0.6”)
16

(2.4” CTRS)
60 CTRS

182
110

(7.2”)
(4.3”)

2 mounting locations to suit M5 socket head cap screw.

21 (Screw pack supplied with icountPD).
(0.8”)
icountPD flange thickness = 10mm (0.4”)
52

155
(2.0”)
MaximumTorque
Maximum Torque 5Nm
5Nm
(6.1”)

Typical Applications

Mobile Equipment Power Generation

o Earth Moving Machinery o Wind Turbines
o Harvesting o Gearboxes
o Forestry o Lubrication Systems
o Agriculture With continuous monitoring the optimum level is
Monitoring of the hydraulics, enabling the vehicles achieved in the least amount of time.
to function to there best capability under load
conditions through pistons, servo valves, control Maintenance
rams and gear pumps.
o Test Rigs
o Flushing Stands
Industrial Equipment
To increase efficiency of your equipment by
o Production Plants continuously monitoring the cleanliness level of the
o Fluid Transfers hydraulic fluid.
o Pulp & Paper
o Refineries
To monitor the cleanliness of the equipment
throughout the production line, from the machine
tool controlled hydraulics through to contamination
of fluid transfer. Ensuring the integrity of the fluid is
maintained throughout the refining process.

4 Parker Hannifin
Hydraulic Filter Division Europe
FDCB321UK.
M12 Communication cable: wiring configuration

M12 Communication cable

Pin 4-20mA option connections 0-5v/0-3v option connections
1 NOT USED NOT USED
2 RS232 Ground (Pin 5**) RS232 Ground (Pin 5**)
3 Channel A, ISO 4µm(c)* Channel A, ISO 4µm(c)*
4 Channel B, ISO 6µm (c)* or NAS Channel B, ISO 6µm (c)* or NAS
(if selected) (if selected)
5 RS232 Receive (Pin 3**) RX232 Receive (Pin3**)
6 RS232 Transmit (Pin 2**) RS232 Transmit (Pin 2**)
7 Moisture sensor channel (if fitted) Moisture sensor channel (if fitted)
8 Channel C, ISO 14µm (c)* Channel C, ISO 14µm (c)*
Important Note: It is the responsibility of the end user to ensure that the cable’s braided screen
is terminated to a suitable earth bonding point.
* Optional – refer to the ‘IcountPD part number specifier’ section in this manual.
** A standard USB serial adaptor can be used with the recommended 9-way D-type
connector to convert RS232 to USB.

Limit relay alarm levels

The IcountPD can be specified with a built-in limit switch relay which can be triggered when a preset alarm level
is reached. The relay contacts can be used to switch on or off an external device.
M12 Supply and Relay (if fitted) cable
Pin Current loop options connections 0-5v/0-3v option connections
1 Product supply 9-40Vdc Product supply 9-40Vdc
2 4-20mA Supply 12-20Vdc 0-5 / 0-3V Supply 12-24Vdc
3 Relay (Normally Closed)*** (if fitted) Relay (Normally Closed)*** (if fitted)
4 Relay (Normally Open)*** (if fitted) Relay (Normally Open)*** (if fitted)
5 NOT USED NOT USED
6 NOT USED 0-5V / 0-3V Supply 0 Vdc
7 Main supply 0Vdc Product supply 0Vdc
8 Relay (Common)*** (if fitted) Relay (Common)*** (if fitted)
Note: If the moisture sensor is fitted without either option then the output is RS232.
Parker Hannifin recommend that the mating M12 connector cables are screened. These
cables are available from Parker Hannifin – ordering information section.
*** Optional – refer to ordering information section.

(Limit Relay Wiring Instructions)

NORMALLY OPEN
NORMALLY CLOSED
COMMON

Fluid condition monitoring

5
 Online Particle Detector

IcountPD
Variable mA output settings

ISO V MILLIAMP The following table can be used to equate the analogue
20.0 output to an ISO or NAS Code.
18.0
Example ISO code 12 is equal to 10mA
16.0
Milliamp Output

14.0 mA ISO mA NAS

12.0 4.0 0 4 00
10.0 4.5 1 5 0
8.0 5.0 2 6 1
6.0 5.5 3 7 2
4.0 6.0 4 8 3
2.0 6.5 5 9 4
7.0 6 10 5
0.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 7.5 7 11 6
ISO CODE 8.0 8 12 7
8.5 9 13 8
9.0 10 14 9
NAS V MILLIAMP 9.5 11 15 10
20 10.0 12 16 11
18 10.5 13 17 12
16 11.0 14 18 **
Milliamp Output

14 11.5 15 19 **
12.0 16 20 ERROR
12
12.5 17
10
13.0 18 The following table can be used to equate the
8
13.5 19 analogue output to an ISO or NAS Code.
6 14.0 20
4 14.5 21 Example ISO code 12 is equal to 10mA
2 15.0 **
0 15.5 ** 4-20mA output settings
0 1 2 3 4 5 6 7 8 9 10 11 12 13
16.0 **
NAS CODE ISO Setting
16.5 **
mA current = (ISO Code / 2) +4 eg. 10mA = (ISO 12 / 2) +4
17.0 **
or
17.5 **
ISO Code = (mA current - 4) *2 eg. ISO 12 = (10mA -4) *2
18.0 **
18.5 ** NAS Setting
19.0 OVERRANGE mA current = NAS Code +5 eg. 15mA = NAS 10 +5
19.5 OVERRANGE or
20.0 ERROR NAS Code = mA current -5 eg. NAS 10 = 15mA – 5

Variable voltage output settings

The variable voltage output option has the capability of two different voltage ranges: a 0–5Vdc range as
standard, and a user-selectable 0–3Vdc range. The ‘Full list of commands’ on how to change the voltage
output, are available from Parker.
The following tables can be used to relate the analogue ouptut to an ISO or NAS code.
For example, in a 0–5Vdc range, ISO code 16 is equal to an output of 3.5Vdc. In a 0–3Vdc range, ISO code 8
is equal to an output of 1.0Vdc.

Table relating ISO codes to Voltage output

ISO Err 0 1 2 3 4 5 6 7 8 9 10 11 >
0–5Vdc <0.2 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
0–3Vdc <0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

cont. ISO 12 13 14 15 16 17 18 19 20 21 22 Err

0–5Vdc 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 >4.8
0–3Vdc 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 >2.45

Table relating NAS codes to Voltage output

ISO Err 00 0 1 2 3 4 5 6 7 8 9 10 11 12 Err
0–5Vdc <0.4 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9 4.2 4.5 >4.6
0–3Vdc <0.2 N.S. 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.7 >2.8

6 Parker Hannifin
Hydraulic Filter Division Europe
FDCB321UK.
Digital display parameters (ISO 4406/NAS 1638)

Start up
1. Once the IcountPD has been connected to a regulated power supply, the product logo is displayed for
approximately five seconds as the IcountPD performs a self system diagnostic check.
2. The IcountPD then automatically starts monitoring using factory default test parameters.

MTD calibrated
Channel sizes/Limits Measured ISO codes
Moisture sensor reading
Automatic light sensor

Digital display indication

The digital display will show the actual measured codes, the channel (µ) size and the user definable limits.
Note that the channel size and limits will alternate between the two.
The Moisture Sensor reading (%RH) will also be shown – if the Moisture Sensor option is fitted.
The order of trigger for both the codes and Moisture Sensor option is:
• Solid digit(s) = code(s) that are at or below the set point (limit)
• Flashing digit(s) = code(s) that are above the set point (limit)
The display for ISO4406 and NAS1638 are identical. The ISO display is shown below.

Error detection:
In the unlikely event of a error occurring, the digital display on the IcountPD will simply display the actual
error code only – i.e. ERROR 13 (A full list of error codes are detailed in the IcountPD User Manual).

Moisture sensor output settings

The Moisture Sensor is an option that can be included when specifying the IcountPD.
The Moisture Sensor reports on the saturation levels of the fluid passing through the IcountPD sensing cell.
The output is a linear scale, reporting within the range of 5% saturation to 100% saturation.
Table relating Saturation levels in the sensing cell to IcountPD outputs
Saturation 4–20mA 0–3Vdc 0–5Vdc
5% 4.8 0.15 0.25
25% 8 0.75 1.25
50% 12 1.50 2.50
75% 16 2.25 3.75
100% 20 3.00 5.00

Fluid condition monitoring

7
 Online Particle Detector

IcountPD
Auxiliary Flow Device

The pressure compensated, Flow control device

(Part Number S840074) has been developed to
give the IcountPD user greater flexibility. The Flow
control device will enable testing where flow ranges
are outside the IcountPD specifications (40 – 140
ml/min), or where pipe diameters do not allow the
IcountPD to be installed.
The Flow control device fits onto the downstream
(outlet) side of the IcountPD, connecting through a
manifold block, via a self-sealing quick connection test
point and is fitted with a differential pressure valve.
This Flow control device automatically compensates
for pressure and viscosity changes, whilst maintaining
its setting even as the workload changes.
Simply position the valve to match the viscosity of the
oil you are testing.
The chart below can be used to determine the valve
position:

Valve Position cSt Range

3 up to 100
3.8 90 - 200
4.2 190 - 320
5 310 - 500

Example:
If the fluid you wish to analyse has a viscosity of
50cSt under normal operating conditions then the
control knob on the Flow Control Device should be
set to valve position ‘3’
The flow device will now automatically control the
flow rate through the IcountPD to within its working
range of 40-140ml/min.

Note: The Flow control device will still operate correctly even with the
high pressure side at 200bar and the return back to an open system
of 0 bar (DP = 200bar)

8 Parker Hannifin
Hydraulic Filter Division Europe
FDCB321UK.
Hydraulic Connection Diagram Dimensions

IcountPD

P2 P1

113.2
58.2

78.2
78.2

20.0
High Pressure
Line Side G1/8 ports either side 46.5 90.0
of mounting block 50.0

“In”

4 holes 6.60 Thro’

80.0 Ctrs
62.0
In Out Low Pressure

49.2
Return Side
Flow Control
“Out”
Device
38.0 Ctrs

Actuator Manual flow rate adjustable via control knob

Mounting Type 4 off mounting holes to suit M6 screws (not supplied)
Mounting position Any
Weight 1.7kg (3.7lb)
Fluid Temperature 5°C to +80°C (+41°F to 176°F)
Ambient storage temperature -20°C to +40°C (-4°F to +104°F)
Viscosity range 20cSt to 500cSt (If lower than 20cSt contact Parker)
Differential pressure range 5 to 315 bar
Maximum pressure 315 bar
Flow direction ‘IN’ to ‘OUT’ flow control function
Port thread detail 1/8” BSPP (test points not supplied)
Internal Seals Viton

Fluid condition monitoring

9
 Online Particle Detector

IcountPD
Communication Options

The IcountPD may be configured using the IcountPD Setup Utility. For more direct control of the device using its
communications protocol, you may also use the Microsoft Windows® HyperTerminal program, but note that this
program is not currently supplied with the Windows Vista™ operating system. These two ways of communicating
with IcountPD are described in the following section.

IcountPD Setup Utility software

Communication Protocol

The Communication protocol for the serial Example:

communication link is to be used with Microsoft [SDF dd/mm/yy] - sets the date format.
Windows HyperTerminal. The settings are as follows:
[RDF] - reads the product date format.
Baud rate 9600
All commands are sent in ASCII characters, and
Data bits 8
the protocol accepts both upper and lower case
Parity None
characters as the examples below:
Stop bits 1
Flowcontrol None SDF
The commands used with this product are made up SdF
of Read, Set and Start / Stop commands.
• Set commands allow the value or values of Note: A full list of commands are detailed in the user
parameters to be set manual
• Read commands allow the value or values or
parameters to be read
• Start/Stop allows the user to start and stop tests.

10 Parker Hannifin
Hydraulic Filter Division Europe
FDCB321UK.
Ordering Information

Standard Products Table

Part number Fluid type Calibration Display Limit relay Communications Moisture sensor Cable connector kit Future option
IPD12212130 Mineral MTD LED No RS232 / 4-20mA No M12 - 8 pin N/A
IPD12212230 Mineral MTD LED No RS232 / 4-20mA Yes M12 - 8 pin N/A
IPD12222130 Mineral MTD LED Yes RS232 / 4-20mA No M12 - 8 pin N/A
IPD12222230 Mineral MTD LED Yes RS232 / 4-20mA Yes M12 - 8 pin N/A
IPD12312130 Mineral MTD Digital No RS232 / 4-20mA No M12 - 8 pin N/A
IPD12312230 Mineral MTD Digital No RS232 / 4-20mA Yes M12 - 8 pin N/A
IPD12322130 Mineral MTD Digital Yes RS232 / 4-20mA No M12 - 8 pin N/A
IPD12322230 Mineral MTD Digital Yes RS232 / 4-20mA Yes M12 - 8 pin N/A

Product Configurator
Key Fluid type Calibration Display Limit relay Communications Moisture sensor Cable connector kit Future option
IPD 1 Mineral 1 ACFTD 1 None 1 No 1 RS232 1 No 0 No 0
2 Aggressive 2 MTD 2 LED 2 Yes 2 RS232 / 4-20mA 2 Yes 1 Deutsch DT Series Connector
3 Aviation fuel 3 AS4059 3 Digital 3 RS232 / 0-5V 3 M12, 8 Pin Plug Connector*
hazardous areas 4 GSM 4 RS232 / RS485
4 Aviation fuel 5 RS232 / CANBUS
non-hazardous
area

Accessories
Part number
Description
Mineral Aggressive
1 metre hose length B84224 B84827
2 metre hose length B94802 B94801
5 metre hose length B84730 B84828
Minimess 1/4” BSP fitting P653109 P843081
Minimess 1/8” BSP fitting P653110 P853008
Minimess 1/8” NPT fitting P653512 P853005
Single point sampler SPS2021 SPS2061
Internal flow device Contact Parker Contact Parker
Power supply B84829
5 Metre, M12
8 Pin Plug and Socket Cable Kit* B84654 Contact Parker
Deutsch Connector Kit P843130
RS232 To USB Converter P84011
* M12 Cable kit consists of two 5 metre cables to enable all output options
(Communications cable and Relay/Power Supply cable)

Part number Supercedes Size Flow range l/min Fluid type Port threads
STI0144100 STI.0144.100 0 6-25 Mineral 3/8

STI1144100 STI.1144.100 1 20-100 Mineral 3/4

STI2144100 STI.2144.100 2 80-380 Mineral 11/4

STI0148100 STI.0148.100 0 6-25 Aggressive 3/8

STI1148100 STI.1148.100 1 20-100 Aggressive 3/4

STI2148100 STI.2148.100 2 80-380 Aggressive 11/4

Fluid condition monitoring

11
 Fluid Condition Monitoring

H Oil - Water in Oil Monitor

2

Fluid condition monitoring

257
 Fluid Condition Monitoring

H2Oil - Water in Oil Monitor

Features & Benefits

Water monitoring is now possible while Instant, accurate results are available on the
machinery is working - H2Oil saves on display or the built-in printer ensuring maintenance
production downtime. decisions can be taken immediately.
Totally portable, can be used easily in the field Computer interface available for downloading
without the need for mains power, as well as in data on to the computer through the RS232
the laboratory. serial port.
Connects into system at pressures up to 420 Internal diagnostics features ensures H2Oil will
bar, via either system 20 sensor or single point work accurately and reliably.
sampler. Supplied in a robust aluminium carrying case.
90 second test time. Optional oil delivery kit for simple offline
Scrolling memory for 500 tests plus memory for sampling (see fig.1) .
20 different oil calibration curves.
Routine water monitoring of oil systems with H2Oil
saves time and money, promoting oil longevity.
Samples that are tested are truly representative
of water in the system. Analysis carried out
before sample hydrodynamics change.
Data entry facility enables user to store unique
data test log details with every test carried out.

Fig.1

Typical Applications

Off-shore & power generation

Marine
Construction machinery
Paper mills
Hydraulic equipment & system manufacturers
Research & testing institutes
Military equipment application

The H2Oil is a two channel non-dispersive absorption

spectrometer, designed to measure the level of water
content polluting the oil, reducing system efficiency,
promoting wear and affecting safety.
The H2Oil makes it possible for an end user or service
engineer to carry out quick, accurate measurements,
taken in the field instead of remote laboratory analysis.
With its secured hoses the H2Oil connects to an in-line
System 20 sensor or single point sampler and features a
re-chargeable 12Vdc power pack, diagnostic computer and
on-board printer for effective logging and retrieval of data.

258 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 39
Specification

Construction: Fuse: Viscosity range:

Case-Noryl structural foam and ABS printer 5.0 amp fast blow fuse included for 2-100 cSt (9-460 SSU). 500cSt with SPS.
cover. Key pad silicone rubber. overload protection. Commissioning kit:
Mechanical composition: H2Oil technology: Includes 2 re-chargeable battery packs
Brass, plated steel, stainless steel. Infrared absorption spectroscopy (1 fitted to monitor), 2 x thermal printer
Seals: Measurement and range: rolls, spare fuse,screwdriver, 12Vdc trickle
Fluorocarbon. PPM (0-3000) or % content. charger and user manual.
Hoses: Max operating temperature: Data entry:
Nylon (Kevlar braided microbore). +5°C to +80°C (+41°F to +176°C). 24 character two line back lit dot matrix
LCD. Full alpha numeric keypad.
Hose length: Environmental temperature:
Fluid connection hose 1.2 metre (3.9 feet). +5°C to +40°C (+41°F to +104°F). Data retrieval:
Memory access gives test search facility.
Flow rate: Test completion time:
Up to 400 l/min (100 US GPM). 90 seconds. Monitor carry case:
(System 20 Sensors). Higher flows with SPS. Robust padlockable aluminium
Memory store: presentation case.
Max. working pressure: 500 TEST (scrolling memory) capacity.
Up to 420 Bar (6000 psi). Datum:
Printer facility: Condition monitoring data software pack
Fluid compatibility: Integral 16 column thermal printer for hard plus cable included in commissioning kit.
Mineral oil and petroleum based fluids. copy data.
Computer interface RS232. Performance recheck:
Power: Annual recheck of performance by an
Re-chargeable battery pack (12Vdc trickle Repeatability/accuracy: approved Parker Service Centre.
charger supplied). Better than 5% (typical).

346mm (13.62”) handle raised

318mm (12.51”)

130mm
235mm (9.25”) 20mm (5.12”)
(0.79”) 180mm (7.09”)

Fluid condition monitoring

259
 Fluid Condition Monitoring

H2Oil - Water in Oil Monitor

How the H2Oil Works

On-line testing allows a mixed and flowing sample of oil and

water to pass through the infrared measuring cell. A series
of measurements can be taken and the average given as a
result. With this method a representative oil sample is seen,
unlike the usual reservoir samples sent for analysis. Also,
by taking the test at working temperature and pressure, a
true water content is taken, as both affect the way water is
absorbed in oil.
The flowing sample passes through a special “water free”
optical cell.
The infrared detector monitors two narrow band pass
filters, one of which matches the spectral width of the water
attenuation band. The second narrow wave band selected
is unaffected by water and serves as a reference. By taking
the transmission ratio between the two points an effective
measurement of water can be made.
Core Technology
H2Oil uses true infrared (IR) analysis technique - the principle
used in all laboratory spectrometers, to measure absorbed
water (before saturation point).

Channel one (2.6µ) is the reference point, whereas channel

two (3µ) is H2O.

The IR source is a tungsten halogen bulb.

Effective Oil Maintenance

Take a typical application where water can have a very Whatever the application, whether it be offshore in the oil
detrimental effect on bearings. Cracks are generated early industry or off-road in the construction or earth moving
in life of a bearing and water, once condensed in the crack, industry, the portability of the H2Oil makes it an essential kit
leads to corrosion and early damage. for the service van or engineers tool.
Loss of bearing life, due to water contamination, (see below)
can be prevented by stopping the water from entering the
system in the first place. Introducing a regular water content
monitoring function into the programme, such as the H2Oil,
Ordering Information
would support such efforts.

Standard products table

Product number Supersedes Description
250 WOM9100 N/A H2Oil (includes aluminium case and kit)
B91701 B.91.701 Printer paper (5 rolls)
S840134 N/A Oil delivery unit
% Bearing Life Remaining

200
B84779 B.84.779 Datum download software
B91706 B.91.706 Cable and adaptor
150 Note 1: Part numbers featured with bold highlighted codes will ensure a
‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact
100 Parker Filtration for availability.

50

0
% Water In Oil

260 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 39
 Moisture Sensor Range

MS100, MS150

Fluid condition monitoring

261
 Cost Effective Moisture Detection

MS100 Moisture Sensor

Features & Benefits

Continuous, online moisture indication, for M12, IP68, 5 way moulded cable.
hydraulic and lubricating systems. +8 to +30 Vdc supply voltage.
Reporting of % relative humidity of water Adjustable alarm limit.
content, giving the user information on how
A purpose designed tee adaptor allows for easy
close to the fluids real saturation point.
installation into an existing fluid system.
Reliable data on the rate of water absorption.
The MS100 can also be specified with a bench
Sensing cell technology using a laser trimmed top wand offering the end user greater flexibility.
thermoset polymer, for capacitive sensing that
is capable of absorbing water molecules due to
its micro porous structure.
Uses a thermistor for temperature compensation
correction. Offering total confidence in reporting
the %RH relative humidity over the sensors
temperature range.

Typical Applications

Pulp and paper plants

Marine hydraulics
Power transmission & distribution
Oil reclamation
Industrial hydraulics
Earth moving applications
Agricultural

In-Line Moisture Measurement of Hydraulic

& Lubricating Oils.
Parkers MS100 Moisture Sensor offers fast, reliable and accurate
in-line detection of moisture in fluids. The MS100 transducer type
technology has been especially designed with the preventative
maintenance programme environment in mind.
The industry accepted sensing cell device will monitor and report
Relative Humidity (RH), moisture content in oils. The water content
measurement technique offers the end user benefits over the current
standard form of water content reporting (PPM).
This allows for real time preventative maintenance to be undertaken
and corrective actions to be made. By knowing that the water
contamination is still within the oils absorbing range, less than 100%,
reclaiming fluid properties before additive damage occurs can initiate
calculable cost savings.

262 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 40
Specification

Pressure: Maximum alarm output lead:

Maximum allowable operating pressure. 0.5 amps (maximum continuous lead).
(MAOP): 420 bar (6000 psi). Supply voltage:
Operating temperature: 8 - 30 Vdc/30mA.
Maximum: 85°C (185°F). Calibration accuracy:
Minimum: -15°C (-5°F) – dependent on seal material. +/- 2% RH.
Flow through sensor cell: Compensated thermal stability:
Installed in active flowstream. +/- 1% RH (+10°C to +80°C).
Fluid compatibility: Materials:
Mineral oils and petroleum-based phosphate ester – Stainless steel 316511.
Skydrol option available.
Sensor size/weight:
Viscosity range: 107mm x ø50mm/0.3kg.
Unlimited.
IP rating:
Thread form connections: IP68 (with specified moulded cable).
See ordering information.
Outputs:
0 - 5 Vdc (0.85 – 4.05 Vdc dynamic range).

Installation Details
106-107
Ø50.0 24.0 57.0 13.0

10.0
Ø26.0
Ø12.0

4.0
Thread detail
24.0 A/F dice pattern
Hexagon M12 x 1.0 pitch
42.0

Usage Specifications

Interpreting the data Sensor

Oil type: Texaco Rando 46. Using only the sensor as a go/no-go device, a red LED will
Saturation point: 400ppm @ 65ºC (150ºF). indicate when the oils water concentration reaches 80%
At the above operating condition, the meter displays 100% saturation and trigger a corresponding voltage output. The
saturation. As the meters scale indicates a reduction in the unit also features an analogue output proportional to
saturation percentage, there is also a corresponding reduction % saturation with a dynamic range of 0.85 to 4.05 volts.
in PPM at a constant temperature. In the example above,
a meter reading of 50% saturation could be interpreted as
200ppm at 65ºC (150ºF).

Under Over
%RH
0 0 10 20 30 40 50 60 70 80 90 100 100

Vdc <0.85 0.85 1.17 1.49 1.81 2.13 2.45 2.77 3.09 3.41 3.73 4.05 >4.05

Fluid condition monitoring

263
 Cost Effective Moisture Detection

MS100 Moisture Sensor

Visual Indicators Specifications

Bar Graph Indicator (PBG8341A)

Construction: Description DDU1001 DDU1002
Housing – nylon 6/6, window – acrylic, Power supply 22 - 55 Vdc 110 - 240 Vdc
bezel/board supports – ABS, Accuracy ± 0/01% typical ± 0.1% typical
pins – phosphor bronze. Sample rate 10 per second 2.5 per second
Operating temp (°C) 0 - 55 0 - 50
Power supply: Storage temp (°C) -10 to +70 -10 to +70
11 – 30 Vdc. Display 5 digit LED 31/2 digit LED
Signal input: (By dipswitch configuration) Power output (Vdc) 24 24
Off – differential up to 5V. Weight (kg) 0.21 0.30
A – single signal (Ref. 0V) up to 5V. Panel cutout (mm) 92x48 ±/0.5 93x45 ±/0.5
B – single signal (Ref. 1V) up to 6V. Dimensions (mm) 48x96x100 48x96x93

Cut out size:

45.6mm x 45.6mm.
Fixing:
Push fit panel thickness 0.9mm to 3.2mm.
Sealing:
Designed to IP50 standard.
(Front face may be silicon sealed after LED configuration).
Scale:
Supplied 0 to 100% in horizontal.
Other scales, in volume, consult Parker Hannifin.
Scaling factors:
10% to 100% range. Fully adjustable.
Lamp intensity:
4mcd each.
Front viewing:
Polarised.
Weight:
29gms.

PBG8341A DDU1001 DDU1002

The MS100 Moisture Sensor has a maximum

cable length of 10 meters, before the output starts
to degrade. The MS100 extension box boosts all
the outputs from the MS100 Moisture Sensor. This
enables the outputs to go another 10 meters.

Features

IP67 rated container (120mm x 100mm x 60mm)

Integrated 10 meter PVC cable already fitted.
Complete with wall mounting kit.
No additional power supply required.
Universal box means it can be positioned in any
orientation.

264 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 40
Ordering Information

Standard products table - moisture sensors

Product number Supersedes Model Thread form Seal option

MS1001P MS100-1P MS100 1

/4" BSP with bonded seal P
MS1005P MS100-5P MS100 /16 - 18UNF 2A (SAE J514)
9
P
MS1002P MS100-2P MS100 1
/4" BSP with integral seal P
MS1003P MS100-3P MS100 R1/4" BSPT P
MS1004P MS100-4P MS100 1
/4" NPT P
MS1006P MS100-6P MS100 Handheld version P
MS1007P MS100-7P MS100 Inline tee version P
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Standard products table - accessories/panel displays

Product Number Supersedes Description

P9732PVC02 P.9732PVC-02 2 meter M12 IP68 PVC coated cable

P9732PVC05 P.9732PVC-05 5 meter M12 IP68 PVC coated cable
DDU1002 DDU-1002 +110 to +240 Vac process indicator
PBG8341A PBG.8341.A +11 to +30 Vdc bar graph indicator
P9732PVC10 P.9732PVC-10 10 meter M12 IP68 PVC coated cable
P9732PUR02 P.9732PUR-02 2 meter M12 IP68 PUR coated cable
P9732PUR05 P.9732PUR-05 5 meter M12 IP68 PUR coated cable
P9732PUR10 P.9732PUR-10 10 meter M12 IP68 PUR coated cable
S970400 N/A 12 Vdc power supply
S970410 N/A 10 meter extension box
P973200 N/A IP67 Re-wireable M12 connector
DDU1001 DDU-1001 +22 to +55 Vdc process indicator
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

265
 Cost Effective Moisture Detection

MS150 Moisture Sensor

Features & Benefits

• Return line low pressure rating: Up to 10 bar • Independent temperature output

(145 PSI) • 2 alarm point option with alarm module
• Results reported as a “% saturation” of water (PAM8342)
in your oil
• Variable signal output options Parkers MS150 Moisture Sensor is the easy-to-fit,
• (+1 to +5 Vdc) (+4 to +20mA) RH% lightweight and cost-effective solution to accurately
• (0 to +5 Vdc) Temperature measure the % moisture present in operating fluids.
• Compatible with Parker Digital Display Units
(DDU1001, DDU1002 and the bar graph MS150 provides an effective early warning device
indicator PBG8341A) when connected to an array of monitoring options
to ensure continuous system protection and fluid
• Simple dynamic installation into a flow path
integrity.
• Temperature compensated results
• Two thread forms (1/4” BSPT & 1/4” NPT)
• Easier and more flexible cable connection

Typical Applications

• Earth moving machinery

• Forestry
• Agricultural (harvestors, tractors)
• Industrial factory (pulp & paper processes)
• Marine (hydraulic stabilizer systems)
• Test rig stands (critical test machines)
• Ground support vehicles (military)
• Fluid transfer systems (skids)
• Commercial aerospace and ground
support systems (skids)

Detect water contamination before it

shuts your application down
Dynamic moisture monitoring for todays
demanding mobile hydraulic systems. The new
lightweight MS150 moisture sensor is designed to
produce accurate, real time moisture indications
in petroleum - based, synthetic oils and phosphate
ester (aggressive fluids) below fluid saturation levels.

266 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 40
Specification

Pressure: Port connections:

Maximum allowable operating pressure. (MAOP): 10 bar (145 PSI). 1/4” BSPT or 1/4” NPT.

Operating temperature: Outputs:

Minimum: -20°C (-4°F). Variable - see sensor outputs.
Maximum: +85°C (+185°F). Supply voltage:
Flow through sensor cell: +8 to +30 Vdc.
Installed in active flowstream. Sensor size/weight/material:
Fluid compatibility: 80mm x 43mm/0.1kg/Aluminium
Mineral oils, petroleum-based and IP ratings:
Phosphate ester. IP54
Viscosity range:
Unlimited.

Installation Details

79-80
40.0 A/F 24.0 37.0
Ø10.0

Ø38.0

All dimensions in millimetres (mm) Dimensions are for reference only

Thread Form Options

MS150 BSPT NPT
Water enters hydraulic and lubricating 15.0 17.0

systems from a variety of sources.

Ø10.0

Atmospheric ingression of water vapor,

Ø10.0

as well as internal heat exchanger

leaks, create unfavorable operating
conditions. The MS150 Moisture
Sensor eliminates the guesswork
by providing real time condition R1/4 BSPT 1/4 NPT
monitoring. It is designed to work well
11.0 11.0
in petroleum/synthetic hydraulic and
lubricating oil applications. maximum maximum
Flow in either direction

Flow in either direction

10.8 with
10.7 with
reamer
Tapping

reamer
drill

Tapping

11.2 without
drill

11.1 without
reamer
reamer

Tap to gauge

Installation details for R1/4 BSPT taper Installation details for 1/4 NPT

For alternative thread forms please contact Parker Filtration

Fluid condition monitoring
267
 Cost Effective Moisture Detection

MS150 Moisture Sensor

Interpreting Data

The Parker MS150 Moisture Sensor is designed to Example

provide real time accurate and repeatable results Oil type: Texaco Rando 46
reported as % saturation of water. Percent saturation Saturation point: 400ppm @ +65°C
is a useful measurement that offers the user a simple,
quantitative method in determining how wet or dry a
(+150°F)
hydraulic or lubricating system may be. In contrast, At the above operating condition, the meter
PPM and % water by volume measurements provide displays 100% saturation. As the meter’s scale
little information about a fluid’s free or dissolved water indicates a reduction in the saturation percentage,
condition. % saturation can now easily be converted there is also a corresponding reduction in PPM
to PPM as long as the fluid’s saturation point is at a constant temperature. In the example above,
known using the MS150 temp output. a meter reading of 50% saturation could be
interpreted as 200ppm at +65°C (+150°F)
Sensor Outputs
MS150 moisture sensor pin designations
Pin Designation I/O Description
1 Supply Input Supply voltage (+8 to +30Vdc)
2 %RH Output % Saturation out (+1 to +5Vdc)
3 %RH Output % Saturation out (+4 to +20mA)
4 Temperature Output Temperature out (0 to +5Vdc)
5 Common Input Common (0Vdc) ground from
power supply (not chassis ground)

Indicator Options

For specifications on the process indicator options see page 268 and 269 for ordering information.

Description DDU1001 DDU1002

Power supply 22 - 55 Vdc 110 - 240 Vdc
Accuracy ± 0/01% typical ± 0.1% typical
Sample rate 10 per second 2.5 per second
Operating temp (°C) 0 - 55 0 - 50
Storage temp (°C) -10 to +70 -10 to +70
Display 5 digit LED 31/2 digit LED
Power output (Vdc) 24 24
Weight (kg) 0.21 0.30
DDU1001 DDU1002 Panel cutout (mm) 92x48 ±/0.5 93x45 ±/0.5
Dimensions (mm) 48x96x100 48x96x93

Ordering Information

Standard products table

Product number Supersedes Description

MS1503 MS150-3 1
/4" BSPT moisture sensor
DDU1002 DDU-1002 +110 to +240 Vac process indicator
MS1504 MS150-4 1
/4" NPT moisture sensor
DDU1001 DDU-1001 +22 to +55 Vdc process indicator
PBG8341A PBG.8341.A Bar graph indicator
PAM8342 PAM.8342 Alarm module
Note 1: Part numbers featured with bold highlighted codes will ensure a
‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact
Parker Filtration for availability.

268 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 40
 Hand-held Oil Condition Monitor

Oilcheck

Fluid condition monitoring

269
 Hand-held Oil Condition Monitor

Oilcheck
Features & Benefits Using Oilcheck

• A comparator between new and used oils. Following the simple sampling procedure. The
• Oilcheck gives early warning of impending Oilcheck will ensure effective and highly repeatable
engine failure. results. Once a clean oil sample has been placed in
the ‘Sensor Well’ and the ‘TEST’ button has been
• Cost effective solution to save money
pressed, the instrument will ‘zero’ on the sample.
and help increase engine life.
• Completely portable, battery powered. Once cleaned out with a degreaser and replaced by
• Ideal for fleet owners, garages and DIY a contaminated sample, a new reading is obtained
mechanics. on the LCD, which can be easily compared against
the green/amber/red efficiency scale.
• Numerical display to show positive or negative
increase in dielectrics.

Typical Applications

Fleet owners
Construction equipment maintenance
Vehicle service garages
Plant hire maintenance

The Oilcheck from Parker Filtration’s Condition

Monitoring Centre detects and measures the
dielectric constant of oil, by comparing the
measurements obtained from used and unused
oils of the same brand.
Used as a regular service monitoring instrument,
the Oilcheck will give the engineer warning of an
impending engine failure and promote increased
engine life. Oilcheck is the low-cost solution that
will take the guesswork out of oil changes, saving
money and time.

270 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 41
Specification Using Oilcheck

Case construction: The Oilcheck can remove the need for costly
ABS. and time consuming laboratory analysis of
Circuitry: mineral and synthetic oils used in engines,
Microprocessor control.
gearboxes and bearing lubrication systems.
Battery: It detects mechanical wear and any loss of
1 x 9V alkaline.
lubricating properties in the oil with a repeat
Display:
accuracy of less than 5%.
LCD.
Suitable oil types:
Mineral and synthetic based oils. The Oilcheck is able to show changes in the
Repeatability: Green/amber/red oil condition brought about by the ingress of
Better than 5%. numerical value water content, fuel contamination, metallic
Readout: content and oxidation.
Green/amber/red grading, Numerical value
(0-100).
Battery lifetime:
>150 hours or 3,000 tests.
Dimensions:
250mm x 95mm x 34mm (9.8” x 3.7” x 1.3”).
Weight:
0.4kg.

Function
Installation Details buttons

Ø95
Visual
display

Numerical
display

Sample
sensor
250

Re cal
button

Test
button

On/Off
Hi/Lo switch

64 32
34

Ordering Information
Standard products table
Product number Description
OLK605 Oilcheck kit with numerical readout
OLK611 Oilcheck cleaner
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Fluid condition monitoring

271
With Parker as your partner,
you have access to the world's
broadest line of motion control
components and systems

Parker is the only company in the For further information call our

World to manufacture and supply a Product Information Centre free

complete range of hydraulic, pneumatic on 00800 27 27 5374 or visit our

and electromechanical systems and web site at www.parker.com

components. Whether your need is for

cylinders, valves, pumps, filters, drives,

controls, connectors or seals, Parker

has a product to meet your needs from 00800 27 27 5374

a range of more than 600,000 for every www.parker.com
type of mobile and industrial application. epic@parker.com
 Laboratory Analysis Service

Par-Test ™

Fluid condition monitoring

273
 Laboratory Analysis Service

Par-Test ™

Changes to ISO Standards

The impact on filter performance reporting and

the contamination code.
Chart 1 - ISO Comparison
The recent changes to ISO contamination and filtration Former two-digit ISO 4406:1987
standards were brought about to solve accuracy, tracability, 5µm / 15µm
and availability issues. It is important to remember that both
real world hydraulic system cleanliness levels and actual
14 / 11
system filter performance remain unchanged.
Former three-digit ISO 4406:1987
However, the reporting of cleanliness levels and filter 2µm / 5µm / 15µm
performance has changed due to the new particle counter
calibration and multi-pass test procedures. 17 / 14 / 11
New three-digit ISO 4406:1999
The new calibration method.
4µm (c) / 6µm (c) / 14µm (c)
ISO 11171 is the new particle counter calibration method and 18 / 14 / 11
utilises calibration fluid made from ISO Medium Test Dust
(ISO MTD) suspended in MIL-H-5606. The calibration fluid
is traceable to the National Institute of Standards and Chart 2 - Particle Size Comparison
Technology (NIST) and is designated by NIST as Standard
Reference Material (SRM) 2806. ISO 11171 is replacing ISO ACTFD size NIST size
4402 which is based on obsolete AC Fine Test Dust (ACFTD) (per ISO 4402:1991) (per ISO 11171:1999)
It is important to note that the ISO 11171 calibration method µm µm (c)
is based on a distribution of particles measured by their 1 4.2
equivalent area diameter, whereas ISO 4402 is based on
distribution of particles measured by their longest chord. 2 4.6
Also, the NIST work utilised scanning electron microscopy for 3 5.1
particles below 10µm in size, whereas sizing distribution on
ACFTD utilised optical microscopy. 5 6.4
The charts to the right show the approximate particle size
7 7.7
relationship between the calibration methods. 10 9.8
15 13.6
20 17.5
25 21.2
30 24.9
40 31.7

274 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 42
Laboratory Analysis Service

The Par-Test service is a complete laboratory Par-Test: complete laboratory analysis

analysis performed on a small quantity of fluid Par-Test is a complete laboratory analysis, performed on a
supplied by the customer. small quantity of fluid. The test results are very comprehensive,
and can include the following critical analysis:
Provision of a sampling bottle of known cleanliness
and a pre-addressed bottle container, both of • Spectrochemical analysis of over 20 wear metals and
additives.
which are designed to be suitable for mailing, is
• Particle count reported over five size ranges. The particle
part of the service.
count is expressed as an ISO cleanliness code. It is also
Most contaminant in hydraulic or lube oil systems plotted on a graph for better comparisons.
are invisible • Viscosity at 40°C, 100°C, Viscosity Index and TAN are
reported.
Damage causing particles range from 5 to 40 micrometers in
size, but the limit of human visibility is only 40 micrometers. • Water content is expressed as a % of volume. Many
Harmful particulate matter is often invisible, even in very high hydraulic systems may tolerate up to 300 ppm (.03%) of
concentration. Also, acids, water and other fluid oxidation water contamination. Some bearing or lube oil systems
by-products cannot be easily detected by human senses. must strictly limit water content.
Some other means must be used to monitor fluid conditions. • Analysis recommendations summarises Par-Test results
and indicates what action should be taken to prevent any
Fluid analysis is the only method to check fluid conditions
potential problems.
Fluid analysis services may be as simple as a sample batch • Fast turnaround—test results are mailed back to you
comparison. Or, a full laboratory treatment may be used to within 24-48 hours after receiving your fluid sample. Tests
indicate the sources and quantity of contamination. In either including Spectro-chemical analysis allow 7 days.
case, important test results are achieved. Parker offers both
types of services to fit your specific needs. Par-Test: concise and complete
The Par-Test report you receive is neatly organised. You
may quickly analyse the test results — or compare them to
a previous sample. Using the same “unit number” on your
sample information form will allow up to four test results listed
on a single Par-Test report form. Par-Test belongs in your
regular maintenance program. Comprehensive and accurate
fluid analysis will help you prevent major hydraulic or lube oil
system problems. Order Par-Test today (see below details)
and see how easy and complete—fluid analysis can be.
Ordering Information

Par-Test: laboratory fluid analysis IMPORTANT

Parker Filtration has three European laboratory locations
The purchase price for the Par-Test sample kit includes the
able to receive and process fluid samples. One location
pre-cleaned and sealed sample bottle, mailing tube with a
in the UK, one location in The Netherlands taking care of
pre-addressed label, sample information data sheet to be
Central European analysis and a location in Finland to provide
completely filled out by the end user and the complete
Scandinavian analysis. Decide on the Option required and
laboratory analysis.
contact the relevant Parker location.

Par-Test laboratory analysis service - UK (Email: filtrationinfo@parker.com) (option 2 only)

- Holland (Email: filtration.netherlands@parker.com) (all options)
- Finland (Email: filtration.finland@parker.com) (option 2 only)

Option Description
Option 1 Sample bottle plus particle/membrane/water/microscopic photo analysis (Holland only)
Option 2 Sample bottle plus particle/water/spectro-chemical analysis (Finland and UK only)
Option 3 Sample bottle plus membrane/water/microscopic photo analysis (Holland only)
Option 4 Sample bottle plus particle/membrane/water/spectro-chemical/microscopic photo analysis (Holland only)

Note: Please allow 24-48 hours of laboratory time plus mailing/shipping time to receive your test results.

Fluid condition monitoring

275
 Laboratory Analysis Service

Par-Test™ Charts
PAR :TEST
Fluid Analysis

PARKER NO. CLIENT NO. UNIT NO. OTHER LOCATION RETURN

1000. 27 4714 295 FLUID MANUF NUMBER COPIES 2
FILTER PUMP
MANUF PARKER MODEL LINE TRUCK FLUID TYPE TYPE NUMBER 2

MICRON RATING 10NOM

SAMPLE DATA

MOLYBOENUM
PHOSPHORUS
MANGANESE

MAGNESIUM

(VIS 212 ºF)

(VIS 104 ºF)
PHYSICAL PROPERTY DATA

WATER
CHROMIUM

ALUMINIUM

VIS 100ºC
SPECTROCHEMICAL ANALYSIS

VANADIUM

CADMIUM
TITANIUM

VIS 40ºC
CALCIUM
DATE DATE
COPPER

SODIUM
SILICON

BARIUM
BORON
NICKEL

SILVER
VALUES EXPRESSED IN PARTS PER

LAB# TAKEN/ FILTER

LEAD
IRON

ZINC
TESTEN SERVICE
MILLION (PPM) BY WEIGHT

TIN

9261 30JUN89 3 0 0 2 0 0 0 0 0 9 0 0 2 29 291339 233 0 0 0 0 32.7 N/A 0

02JUL89
9262 28JUL89 2 0 0 2 0 0 0 0 0 9 0 0 4 24 25 156 244 0 0 0 0 32.8 N/A 0
30JUL89
9263 20AUG89 1 1 0 1 0 0 0 0 0 7 0 0 1 29 24 133 207 0 0 0 0 32.3 N/A 0
22AUG89

ANALYSIS RECOMMENDATIONS PARTICLES PER 100 MILLILITER GREATER THAN INDICATED SIZE
LAB# ISO RATING >5 >15 >25 >50 >100
9261 20/ 17 667,488 67,608 15,440 872 88

9262 19/ 14 315,466 12,052 2,496 296 8

9263 16/ 12 41,758 2,280 664 112 16

LAB# ANALYSIS RECOMMENDATIONS LAB# ANALYSIS RECOMMENDATIONS

HIGHER PRESSURE SYSTEMS ( >1500 PSI) SHOULD RECEIVE IMMEDIATE
FILTRATION ATTENTION. SAMPLE AGAIN WITHIN 30 DAYS
9263 CLEANLINESS LEVEL SUITABLE FOR MOST SYSTEMS. SERVO CONTROLS
9261 EXTREME LEVELS OF CONTAMINATION INDICATE POSSIBLE WEAR PROBLEMS. REQUIRE CLEANER FLUID. CONTINUE REGULAR PREVENTIVE
HIGHER PRESSURE SYSTEMS(.1500 PSI) SHOULD RECEIVE IMMEDIATE MAINTENANCE. SAMPLE AGAIN IN 2 - 3 MONTHS.
FILTRATION ATTENTION. SAMPLE AGAIN WITHIN 30 DAYS
9262 EXTREME LEVEL OF CONTAMINATION INDICATE POSSIBLE WEAR PROBLEMS.
Since remedial advice is based on test results provided by others, and since corrective action, if any is performed by others,
remedial advice is rendered without warranty or liability of any kind.

5 23 5 Viscosity Conversion Chart

4 4
3 22 3 cSt (centistrokes) SUS (Saybolt Universal Seconds)
2 PARTICLES 2
10 46
21 20 93
104
20 IN FLUID 104
25 116
5 5 30 139
SIZE / NUMBER
4 4
3 19 3 32.4 150
2 2 40 185
18 50 232
NUMBER OF PARTICLES PER MILLILITRE GREATER THAN INDICATED SIZE

NUMBER OF PARTICLES PER MILLILITRE GREATER THAN INDICATED SIZE

103 70 324
17 103
90 417
5 5
4 16 4
3 3 Comparisons are made at 100ºF (38ºC).
2 15 2 for other Viscosity Conversion Approximations, use the formula: cSt = SUS
4.635
102 14 102
Cleanliness Level Correlation Table
5 13 5 ACFTD NAS Disavowed
4 4
3 3 ISO Particles/Millilitre Gravimetric 1638 “SAE” Level
2
12 2 Code ≥ 5 Micrometers ≥ 15 Micrometers Level, mg/L (1964) (1963)
11 26/23 640,000 80,000 1000
10 10 25/23 320,000 80,000
10 23/20 80,000 10,000 100
5 5
4 4 21/18 20,000 2,500 12
3 9 3 20/18 10,000 2,500
2 2
8 20/17 10,000 1,300 11
20/16 10,000 640 10
1
7 1 19/16 5,000 640 10
5 5 18/15 2,500 320 9 6
4 6 4 17/14 1,300 160 8 5
3 3
16/13 640 80 1 7 4
2 5 2
15/12 320 40 6 3
10-1 4 10-1
14/12 160 20 5 2
14/11 160 20 5 2
5 3 5 13/10 80 10 0.1 4 1
4 4
12/9 40 5 3 0
3
2 3
11/8 20 2.5 2
2 2
1 10/8 10 2.5
10-2 10-2 10/7 10 1.3 1
5 10 15 20 25 30 40 50 60 70 80 90 100 10/6 10 .64 0.01
PARTICLE SIZE, micrometers

For more information: Contact Parker Filtration’s Condition Monitoring Centre: Tel: +44 (0) 1842 763299.
Fax: +44 (0) 1842 756300. Email: conmoninfo@parker.com

276 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 42
 Pressure Transducers and Transmitters

ASIC ‘Performer’
25, 60, 100, 250, 400 and 600 bar

Brochure: FDHB240UK
March 2007

Transducers and transmitters

 Pressure Transducers and Transmitters

ASIC ‘Performer’
Applications for the ASIC Performer

Fork lift trucks - braking and load systems.

Truck mounted cranes - load safety systems.
Earth moving machinery - hydraulic gearbox control.
Racing car - gearbox, fuel, cooling and suspension systems.
Water usage systems - pressurised systems for industrial and hi-rise usage.
Forest Machinery - felling and logging.
Paper mills - speed control and weighing systems.

The Parker Filtration ASIC Performer Pressure

Transducers and Transmitters.
The ASIC Performer offers six measuring ranges available and
a wide range of pressure a choice of outputs in the form of
sensors for mobile or either voltage or current signals.
industrial applications. Sensors with output signals from
4...20 mA are available in two wire
These sensors have been
technology.
designed for the requirements of industrial instrumentation
systems. Accordingly, the housings and all components in The built-in voltage regulator allows the sensors to be operated
contact with the medium are made of stainless steel. Thus with a supply voltage of 12-36/9-36 Vdc. All sensors are
giving compatibility with a wide range of media. There is a manufactured in our own production facility, typical of Parker
choice of two plug connectors of either DIN or M12. There are Hannifin’s continued commitment to flexibility and quality.

The Complete
Performer range utilises
ASIC technology
(Application Specific
Integrated Circuit)
programmable software.

A comprehensive range of Pressure Transducers and

Transmitters are available from Parker Filtration.
One-piece body and diaphragm machining ensures
long-term product stability.
All stainless steel construction.
6 transducer pressure ratings with 0-5Vdc
and 1-6Vdc outputs.
AC/DC display unit (DDU1002)
6 transmitter pressure ratings with a 2-wire
4-20mA output.
Microdin din plug and M12 connector options.

2 Parker Hannifin
Hydraulic Filter Division Europe
FDHB240UK.
Specification Thread Forms
Pressure ranges: Vibration resistance: G1/4 (1/4BSP) with ED seal.
25, 60, 100, 250, 400, 600 bar. IEC 60068-2-6: All thread forms and sensor interface
Pressure Tolerance Specifications: +/- 5mm/10Hz...32Hz are made from
200m/s2 / 32Hz...2kHz 1.4301 stainless steel.
Rating Maximum Overload Maximum Burst
Installation: Non standard threads - contact
Pressure Pressure
Spanner size 22A/F. Parker CMC
25 x 6.0 (150 bar) x 20.0 (500 Bar)
Max. (recommended) tightening torque = 30Nm.
60 x 2.5 (150 Bar) x 8.0 (500 Bar)
100 x 2.5 (250 bar) x 5.0 (500 Bar) Weight:
250 x 4.0 (1000 Bar) x 7.0 (1800 Bar) 200 - 230g
400 x 2.5 (1000 Bar) x 4.5 (1800 Bar) Lifespan:
600 x 1.5 (1000 Bar) x 3.0 (1800 Bar) 10 million cycles

Electrical Product Performance

Supply voltage Output Linearity: Functional temp range:
12 - 36Vdc 0 - 5Vdc Typical: 0.3%FS. -40°C to +85°C.
Max: 0.6%FS. Compensated temperature:
12 - 36Vdc 1 - 6Vdc
Hysteresis: -20°C to +85°C.
9 - 36Vdc 4 - 20mA Typical: 0.1%FS. Stability:
Transducer current draw = <6mA Max: 0.25%FS. <0.1%FS/a (typ).
Load impedance (ohm) = >10K Repeatability: Response time:
Typical: 0.2%FS. = <1mS.
Output signal noise = 0.1%FS Max: 0.4%FS.

Wiring Information
Connector Connector 4 3
Industrial Micro Din M12
9.4mm
3
1
2

E
1 2
PIN 4 - 20mA 0 - 5Vdc 1 - 6Vdc PIN 4 - 20mA 0 - 5Vdc 1 - 6Vdc
1 Do not connect Signal output Signal output 1 Supply +ve Supply +ve Supply +ve
2 Supply +ve Supply +ve Supply +ve 2 Do not connect Signal output Signal output
3 Do not connect Do not connect Do not connect 3 Return Supply ref. (0v) Supply ref. (0v)
E Return Supply ref. (0v) Supply ref. (0v) 4 Do not connect Do not connect Do not connect

Installation Details
Ø22 M12x1

Ø22
43.2
47

SW22
SW22 hex. 22
hex. 22
12
12

ED seal
ED seal
1 4
G1/4 G/
Ø19 Ø18.8

Transducers and transmitters

3
 Pressure Transducers and Transmitters

ASIC ‘Performer’
Ordering Information

Standard products table

Product number Description - pressure transducer Model Output Pressure Thread Connector
form
PTDVB2501B1C1 0 - 5 Vdc 250 bar 1/4 BSP ED seal micro-din PTD VB 250 1 B1C1
PTDVB4001B1C1 0 - 5 Vdc 400 bar 1/4 BSP ED seal micro-din PTD VB 400 1 B1C1
PTDVB2501B1C2 0 - 5 Vdc 250 bar 1/4 BSP ED seal M12 PTD VB 250 1 B1C2
PTDVB4001B1C2 0 - 5 Vdc 400 bar 1/4 BSP ED seal M12 PTD VB 400 1 B1C2
PTDVB0251B1C1 0 - 5 Vdc 25 bar 1/4 BSP ED seal micro-din PTD VB 025 1 B1C1
PTDVB0251B1C2 0 - 5 Vdc 25 bar 1/4 BSP ED seal M12 PTD VB 025 1 B1C2

Product number Description - pressure transmitter Model Output Pressure Thread Connector
form
PTXB4001B1C2 4 - 20 mA 400 bar 1/4 BSP ED seal M12 PTX B 400 1 B1C2
PTXB0251B1C1 4 - 20 mA 25 bar 1/4 BSP ED seal micro-din PTX B 025 1 B1C1
PTXB0251B1C2 4 - 20 mA 25 bar 1/4 BSP ED seal M12 PTX B 025 1 B1C2
PTXB4001B1C1 4 - 20 mA 400 bar 1/4 BSP ED seal micro-din PTX B 400 1 B1C1
PTXB2501B1C1 4 - 20 mA 250 bar 1/4 BSP ED seal micro-din PTX B 250 1 B1C1
PTXB2501B1C2 4 - 20 mA 250 bar 1/4 BSP ED seal M12 PTX B 250 1 B1C2

Accessories
Product number Supercedes Description

P833PVC2M P.833PVC-2M 2 meter PVC coated 4 core cable

P833PVC5M P.833PVC-5M 5 meter PVC coated 4 core cable
P833PVC10M P.833PVC-10M 10 meter PVC coated 4 core cable
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Product configurator
Product number Output options Pressure range (bar) Thread form Connector

PTD VB 0 - 5 Vdc 025 0 - 25 1 /4 BSP with ED seal

1
B1C1 Micro-din
PTX SB 1 - 6 Vdc 060 0 - 60 B1C2 M12
B 4 - 20mA (PTX only) 100 0 - 100
RB 0.5 - 4.5 ratiometric 250 0 - 250
PB 0.1 - 4.9 400 0 - 400
600 0 - 600

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Examples of standard part number product ordering

PTDVB2501B1C1 0 – 5 volt output transducer PTXB0251B1C2 4 – 20mA output transmitter
250 bar maximum pressure 25 bar maximum pressure
1/4” BSP with ED seal 1/4” BSP with ED seal

Industrial micro-din 9.4mm connector M12 connector

(See accessories for IP68 protected cable)
PTDSB4001B1C2 1 – 6 volt output transducer
400 bar maximum pressure
1/4” BSP with ED seal

M12 connector
(See accessories for IP68 protected cable)

Condition Monitoring website: www.parker.com/cmc Brochure Ref: FDHB240UK

Hydraulic Filter Division Europe
Condition Monitoring email: conmoninfo@parker.com
For further information on other Parker Products, © Copyright 2007
Parker Hannifin Corporation
call EPIC free on 00800 27 27 5374
All rights reserved.
 A range of cost saving solutions

Flowmeters & Monitors

Flowmeters & monitors

279
 Flowmeters & Monitors

LoFlow - Oil and Water Flowmeters

Features & Benefits

Easy to read, permanent printed scales.

Large scale definition for precise measurement.
Easy panel mounting assembly.
Negligible pressure drop characteristics.
10 bar pressure rating.
Simple to use.

Specification Installation Details

Construction: Maximum working Simple to fit, easy to use

Body Grillon TR55. temperature:
Back body half ABS 7020. 60°C. The LoFlow meter has been designed for those industries
Ball retainer ABS 7020. Accuracy: where the need exists for a low cost solution to small
Back panel PVC. ±2% typical. measurements of flow with an accurate reading. LoFlow
Float See below.
Repeatability: uses the well tried and tested principle of variable area flow
Maximum working pressure: ±1%.
10 bar.
measurement utilising the movement of a ball or float inside
Connections: a calibrated tapered bore.
1/4” and 3/4” tapered threads.

Typical Applications
Pharmaceutical industry Water treatment
Filtration systems Photography and X-ray
Hospital equipment Equipment
For water applications Swimming pools

Installation Details Ordering Information

39
Outlet port R 3/4 24 Standard products table
Product number Supersedes Media Ports Flow range Float
(BSPT male) (l/min) material
14

LF802412 LF.2020 Water 3

/4 - 3
/4 0.2 - 2.0 Acetal
LF802413 LF.2100 Water 3
/4 - 3
/4 2.0 - 10.0 S/Steel
44

LF802414 LF.2220 Water 3

/4 - 3
/4 3.0 - 22.0 S/Steel
LF801431 LF.1002 Oil 1
/4 - 3
/4 0.010 - 0.20 S/Steel
LF802432 LF.1009 Oil 3
/4 - 3
/4 0.1 - 0.9 Acetal
LF802434 LF.1090 Oil 3
/4 - 3
/4 1.0 - 9.0 S/Steel
LF801411 LF.2005 Water 1
/4 - 3
/4 0.06 - 0.55 S/Steel
Note 1: Part numbers featured with bold highlighted codes will ensure a
188

‘standard’ product selection.

101

Note 2: Alternate displayed part number selection will require you to contact
Parker Filtration for availability.
14

40 16
4 off ‘push out’
Inlet port fixing slots Ø6 X 8 LG
R1/4 / R3/4

280 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 44
 Flowmeters & Monitors

Easiflow - Meters and Flowswitches

Features & Benefits

Oil and water calibrated.

Works in any plane.
Pressures up to 10 bar.
Flows from 1 to 150 I/min.
Accuracy ±5% FSD.
Repeatability ±1% FSD.
Switches – fully adjustable flow rate signalling.
Plant and equipment protection.

Easiflow Meters Specification Flowswitch Specifications

Construction: Flow rate: The Easiflow switch is a flow measuring device incorporating
Cone Acetal 1 to 150 l/min. an AC/DC switch suitable for controlling valves or pump
Viewing glass Borosilicate glass Viscosity range:
Calibrated spring Stainless steel motors or for activating alarm signals.
10 to 200 centistokes (oil).
Seal Nitrile General flowmeter specification:
Body Glass filled nylon Accuracy:
±5% FSD. See material details opposite.
Maximum working pressure: Switch type specifications:
10 bar. Repeatability:
±1% FSD. Magnetically operated reed switch.
Minimum working pressure:
1 bar. Connections: Electrical details:
1” BSP parallel threads. Voltage range 300Vac/dc
Temperature range:
+5°C to +80°C - Oil. Weight: Maximum current 2.5Amps
+5°C to +60°C - Water. 0.4kg. Maximum load 100W resistive
70W inductive

Installation Details
42 A/F HEX
42 A/F HEX
106
Ø40

Ø40

20 156 Ø60
20 156 Ø60
196 196

Ordering Information

Standard products table Standard products table

Product number Supersedes Media Flow range Product number Supersedes Media Flow range Switch range
(l/min) (l/min) (l/min)
EF7731111220 EFW.0302 Water 2 - 30 EF7731110221 EFW.015S1 Water 1 - 15 5 - 15
EF7731112220 EFW.0502 Water 4 - 50 EF7731111221 EFW.030S1 Water 2 - 30 5 - 30
EF7731113220 EFW.1002 Water 5 - 100 EF7731110121 EFL.015S1 Oil 1 - 15 5 - 15
EF7731114220 EFW.1502 Water 10 - 150 EF7731111121 EFL.030S1 Oil 2 - 30 5 - 30
EF7731110120 EFL.0151 Oil 1 - 15 EF7731112121 EFL.050S1 Oil 4 - 50 10 - 50
EF7731111120 EFL.0301 Oil 2 - 30 EF7731113121 EFL.100S1 Oil 5 - 100 20 - 100
EF7731112120 EFL.0501 Oil 4 - 50 EF7731114121 EFL.150S1 Oil 10 - 150 30 - 150
EF7731113120 EFL.1001 Oil 5 - 100 EF7731112221 EFW.050S1 Water 4 - 50 10 - 50
EF7731114120 EFL.1501 Oil 10 - 150 EF7731113221 EFW.100S1 Water 5 - 100 20 - 100
EF7731110220 EFW.0152 Water 1 - 15 EF7731114221 EFW.150S1 Water 10 - 150 30 - 150
Note 1: Part numbers featured with bold highlighted codes will Note 1: Part numbers featured with bold highlighted codes will
ensure a ‘standard’ product selection. ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require Note 2: Alternate displayed part number selection will require
you to contact Parker Filtration for availability. you to contact Parker Filtration for availability.

Flowmeters & monitors

Parker Hannifin 281
Hydraulic Filter Division Europe
FDHB200UK. Section 45
 Flowmeters & Monitors

Dataflow - 4 to 20mA and Pulse

Output Flow Transmitters
Features & Benefits

4 to 20mA output.
Pulse output available for totalising/batching.
Works in any plane.
Accepts reverse flow.
Maximum flow 150 l/min.
Negligible pressure drop.
Pressures up to 10 bar.
Low cost. Simple to install.
For use with most liquids.
Factory calibrated. Accuracy ±2%.
DIN 43650 plug connection (included).

Specification Installation Details

Construction: Connections: 42 A/F HEX

Borosilicate glasstube. 1” BSP parallel threads.
Nitrile seals. Weight:
Body – Glass filled nylon. 0.7Kg.
Rotor and locater – Acetal.
Calibration 4 to 20mA:

106
Washers and shaft – Stainless steel.
Rotor tips – Stainless steel. 4mA = 0 l/min,
20mA = 100 l/min.
Ø40

Max. working pressure:

10 bar oil/water. Calibration pulse output per litre:
‘K’ factors.
Flow indication: Oil = 51.14
Min: 2 I/min. Water = 44.25 20 156 Ø60
Max: 150 l/min.
Accepts reverse flow. Electrical details 4 to 20mA: 196
Supply = 24Vdc.
Accuracy:
±2% FSD. Pulse output:
Temp range:
Supply = 24Vdc. Ordering Information
(open collector transistor).
+5°C to +80°C oil.
+5°C to +60°C water. Standard products table
Product number Supersedes Description
DFT980 DFT.980 Dataflow "Pulse" output transmitter

Digital Display Specification (DFT 990 only)

DFT990 DFT.990 Dataflow 4-20mA transmitter
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

For indicator options please refer to MS150 section of the Dataflow 4-20mA
catalogue, reference DDU1001 and DDU1002 indicators transmitter can be
connected to a Digital
Display Unit (DDU1001
or DDU1002)

Diagram 1 Diagram 2
4 to 20mA On-Site Calibration Flow setup Plug wiring
Set full flow Set zero flow Earth
Set your system to zero flow. Connect a multimeter across to 20mA to 4mA 0mA OV
terminals 1 (+20mA) and (0mA) (Dia. 2). Set the zero to read 1 2 power
+20mA
Span

Zero

4mA on your multimeter (Dia. 1). Set your system to full flow +24v
power
and set the span to read 20mA on your multimeter. (Dia. 1)
Slider
Note: Minimum span setting = 30 I/min

282 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 46
 Flowmeters & Monitors

Dataflow Compact - Inline Flow

Transmitter
Features & Benefits

Pulse output signal for flows up to 25 l/min.

Lightweight and robust.
Operates in any plane. Simple to install.
Low cost flow measurement.
Negligible pressure drop.
Accepts reverse flow.
3
/8 BSP male connection.
Water or compatible clear fluids only.
Ideal for washing machines, showers and
vending machines.

Specification
Dataflow Compact – The Low Cost Transmitter
Construction: Repeatability:
Body Grilamid – TR55. ±1%. The Dataflow Compact Transmitter was designed to offer
Rotor 18% PTFE filled Temperature range: OEM’s and end users alike a means of monitoring low flows
nylon. +5°C to +70°C. on liquids with an electronic output signal – but at LOW
Shaft Stainless steel.
Shaft Overall dimensions: COST. Fluid passes through the one piece sensor body
Retainers Grilamid TR55. 52mm x 29mm x 27mm. impacting on the twin vaned turbine rotor, causing it to rotate
Operation: Weight: at a speed proportional to the flow rate. Two opposing photo-
Infra-red. 16 grams. transistors are mounted either side of the rotor and externally
Maximum working pressure: Connections: of the clear sensor body, these generate a continuous signal.
3/8 BSP
20 bar.
Cable length: As the rotor spins each blade obscures the infra red signal.
Pressure drop:
Max 0.1 bar at 15 l/min. 300mm. This is then converted into an industry standard pulse output
Flow range: Power supply: signal – compatible with inexpensive display units for flow rate,
1 to 25 I/min. 5 Vdc. totalising, batch control and large, central control systems.
(Accepts reverse flow). Output signal: The lightweight Grilamid body with its virtually unrestricted flow
Calibration: 5 Vdc - square wave path, offers negligible pressure drop for flows up to 25 I/min
‘K’ Factor 752 pulses per litre, and withstanding pressures up to 20 bar.
typical.
Subject to application.
Flow Rate • Totalising • Batch Control and applications
Accuracy:
±2% typical. in many industries
Dataflow Compact Transmitters are small and very robust
having been developed and tested extensively in industry
Installation Details applications where space is a restriction. Dataflow Compact
Red wire +5V supply with its Grilamid body and BSP connections can be installed
Green wire Output signal almost anywhere and once installed will give accurate and
Blue wire 0V supply reliable output signalling.

12.0 TYP

Ordering Information
ISO 228

Standard products table

G3/8

Product number Supersedes Description

DFC9000100 DFC.9000100 Dataflow compact transmitter
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
20.0
34.0

3.5

8.0 TYP

52.0

Flowmeters & monitors

Parker Hannifin 283
Hydraulic Filter Division Europe
FDHB200UK. Section 47
 Flowmeters & Monitors

Flowline - Oil and Water Calibrated

Flowmeters (Brass Version)
Features & Benefits

Works in any plane.

Pressure up to 350 bar (5000 psi).
Flows up to 360 l/min.
Accuracy ±5% FSD.
Repeatability ±1% FSD.
Direct reading.
Relatively insensitive to viscosity changes.
Oil or water calibrated.
Optional reed switch upgrade.

Specification
1/4”, 1/2” and 3/4” BSP thread options
Construction: Viscosity range:
Brass body to BS 2874 CZ114. 10 to 200 cSt (oil). D
Maximum working pressure: Accuracy: E
Up to 350 bar. ±5% FSD.
Minimum working pressure: Repeatability:

ØC
ØF
B
A

1 bar. ±1% FSD.

Temperature range: Min. scale reading:
Brass –20°C to +90°C. 10% FSD.
Calibration: Connections:
Oil Specific gravity BSP parallel threads.
0.856 at 20°C. Wetted/non-wetted parts:
Water Specific gravity Consult Parker for information.
1.0 at 20°C. Note: To add an electrically operated reed switch to your flowmeter
please order B.26307

Ordering Information - Oil

Standard products table
Brass flowmeter for oil Dimensions (mm)

Product number Supersedes Ports Flow range Maximum A B C D E F Weight

BSP (l/min) pressure (bar) (A/F Hex) (A/F Hex) (kg)
FM26122212 FM.26 122 212 1
/4 0.5 - 4.5 350 32 29 19 123 7 32 0.4
FM26122312 FM.26 122 312 1
/4 1-9 350 32 29 19 123 7 32 0.4
FM26222112 FM.26 222 112 1
/2 2 - 20 350 41 38 32 165.5 12.5 46 0.9
FM26222212 FM.26 222 212 1
/2 5 - 46 350 41 38 32 165.5 12.5 46 0.9
FM26322112 FM.26 322 112 3
/4 5 - 55 350 58 46 43 190 15 58 1.75
FM26322212 FM.26 322 212 3
/4 10 - 110 350 58 46 43 190 15 58 1.75
FM26122112 FM.26 122 112 1
/4 0.2 - 2.0 350 32 29 19 123 7 32 0.4
FM26422112 FM.26 422 112 11/4 20 - 180 210 8.0
FM26422212 FM.26 422 212 11/4 30 - 270 210 For intallation details for 11/4 flowmeters see next page 8.0
FM26422312 FM.26 422 312 11/4 40 - 360 210 8.0

Ordering Information - Water

Standard products table
Brass flowmeter for water Dimensions (mm)

Product number Supersedes Ports Flow range Maximum A B C D E F Weight

BSP (l/min) pressure (bar) (A/F Hex) (A/F Hex) (kg)
FM26222122 FM.26 222 122 1
/2 2 - 20 350 41 38 32 165.5 12.5 46 0.9
FM26222222 FM.26 222 222 1
/2 5 - 46 350 41 38 32 165.5 12.5 46 0.9
FM26322122 FM.26 322 122 3
/4 5 - 55 350 58 46 43 190 15 58 1.75
FM26322222 FM.26 322 222 3
/4 10 - 110 350 58 46 43 190 15 58 1.75
FM26122122 FM.26 122 122 1
/4 0.2 - 2.0 350 32 29 19 123 7 32 0.4
FM26122222 FM.26 122 222 1
/4 0.5 - 4.5 350 32 29 19 123 7 32 0.4
FM26122322 FM.26 122 322 1
/4 1-9 350 32 29 19 123 7 32 0.4
FM26422122 FM.26 422 122 11/4 20 - 180 210 8.0
FM26422222 FM.26 422 222 11/4 30 - 270 210 For intallation details for 11/4 flowmeters see next page 8.0
FM26422322 FM.26 422 322 11/4 40 - 360 210 8.0
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

284 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 48
 Flowmeters & Monitors

Flowline - Oil and Water Calibrated

Flowmeters (Stainless Steel)
Features & Benefits

For flow measurement of corrosive or chemical media or

in harsh locations.
Manufactured in stainless steel 316.
Works in any plane.
Pressure up to 350 bar (5000 psi).
Flows up to 360 l/min.
Accuracy ±5% FSD.
Repeatability ±1% FSD.
Direct reading.
Oil or water calibrated.
Optional reed switch upgrade. 11/4” BSP option
308
251.5
Specification 32.5 57
25 25
Construction: Viscosity range:
Stainless steel to BS 970 316S. 10 to 200 cSt (oil).

Ø101.3
65 A/F

65 A/F
Ø87
Ø75

Ø76
Maximum working pressure: Accuracy:
Up to 350 bar. ±5% FSD.
Minimum working pressure: Repeatability:
1 bar. ±1% FSD. Wetted parts: Magnet encapsulation:
Temperature range: Min. scale reading: Body, thread adaptor Stainless steel BS970/1:1991.
–20°C to +105°C. 10% FSD. Piston, etc: cone locknut: :316S31.
Calibration: Connections: Stainless Steel. Spring:
Oil Specific gravity BSP parallel threads. Flow cone: Stainless steel to BS 2056 EN 58J.
0.856 at 20°C. BS 970 316S 16. Seal:
Water Specific gravity Viton.
1.0 at 20°C.
Note: To add an electrically operated reed switch to your flowmeter please
order B.26307
Ordering Information - Oil
Standard products table
Stainless steel flowmeter for oil Dimensions (mm)

Product number Supersedes Ports Flow range Maximum A B C D E F Weight

BSP (l/min) pressure (bar) (A/F Hex) (A/F Hex) (kg)
FM26232112 FM.26 232 112 1
/2 2 - 20 350 41 38 32 165.5 12.5 46 0.9
FM26332112 FM.26 332 112 3
/4 5 - 55 350 58 46 43 190 15 58 1.75
FM26332212 FM.26 332 212 3
/4 10 - 110 350 58 46 43 190 15 58 1.75
FM26132112 FM.26 132 112 1
/4 0.2 - 2.0 350 32 29 19 123 7 32 0.4
FM26132212 FM.26 132 212 1
/4 0.5 - 4.5 350 32 29 19 123 7 32 0.4
FM26132312 FM.26 132 312 1
/4 1-9 350 32 29 19 123 7 32 0.4
FM26232212 FM.26 232 212 1
/2 5 - 46 350 41 38 32 165.5 12.5 46 0.9
FM26432112 FM.26 432 112 11/4 20 - 180 350 8.0
FM26432212 FM.26 432 212 11/4 30 - 270 350 For intallation details for 11/4 flowmeters see above 8.0
FM26432312 FM.26 432 312 11/4 40 - 360 350 8.0

Ordering Information - Water

Standard products table
Stainless steel flowmeter for water Dimensions (mm)

Product number Supersedes Ports Flow range Maximum A B C D E F Weight

BSP (l/min) pressure (bar) (A/F Hex) (A/F Hex) (kg)
FM26132122 FM.26 132 122 1
/4 0.2 - 2.0 350 32 29 19 123 7 32 0.4
FM26132222 FM.26 132 222 1
/4 0.5 - 4.5 350 32 29 19 123 7 32 0.4
FM26132322 FM.26 132 322 1
/4 1-9 350 32 29 19 123 7 32 0.4
FM26232122 FM.26 232 122 1
/2 2 - 20 350 41 38 32 165.5 12.5 46 0.9
FM26232222 FM.26 232 222 1
/2 5 - 46 350 41 38 32 165.5 12.5 46 0.9
FM26332122 FM.26 332 122 3
/4 5 - 55 350 58 46 43 190 15 58 1.75
FM26332222 FM.26 332 222 3
/4 10 - 110 350 58 46 43 190 15 58 1.75
FM26432122 FM.26 432 122 11/4 20 - 180 350 8.0
FM26432222 FM.26 432 222 11/4 30 - 270 350 For intallation details for 11/4 flowmeters see above 8.0
FM26432322 FM.26 432 322 11/4 40 - 360 350 8.0
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Flowmeters & monitors
Parker Hannifin 285
Hydraulic Filter Division Europe
FDHB200UK. Section 49
 Flowmeters & Monitors

Flowline - Flowswitches
Features & Benefits

‘Boxed’ two-switch type.

Intrinsically safe versions.
Maximum/minimum switching models.
Maximum working pressure 350 bar. (min 1 bar)
Flows from 2.0 to 110 I/min.
Stainless steel – suitable for corrosive media.
Stainless steel to BS970 316S16.

Ordering Information
To order the required switching unit, simply add the appropriate prefix before the part numbers shown below.

Standard products table

Product number Supersedes Description

FS643222112 FS.643 222 112 2 switches, 2 - 20 l/min (1/2 BSP) Oil

FS643222212 FS.643 222 212 2 switches, 5 - 46 l/min (1/2 BSP) Oil
FS643322112 FS.643 322 112 2 switches, 5 - 55 l/min (1/2 BSP) Oil
FS643322212 FS.643 322 212 2 switches, 10 - 110 l/min (1/2 BSP) Oil

Product configurator
Brass flowswitch for oil or water
Product number Flow range and (port size) Fluid type
FS643 2 switches 2221 2 - 20 l/min (1/2 BSP) 12 Oil
FS67A Intrinsically safe high switch 2222 5 - 46 l/min (1/2 BSP) 22 Water
FS67B Intrinsically safe low switch 3221 5 - 55 l/min (3/4 BSP)
FS67C Intrinsically safe hi/low switch 3222 10 - 110 l/min (3/4 BSP)

Product configurator
Stainless steel flowswitch for oil or water
Product number Flow range and (port size) Fluid type
FS643 2 switches 2321 2 - 20 l/min (1/2 BSP) 12 Oil
FS67A Intrinsically safe high switch 2322 5 - 46 l/min (1/2 BSP) 22 Water
FS67B Intrinsically safe low switch 3321 5 - 55 l/min (3/4 BSP)
FS67C Intrinsically safe hi/low switch 3322 10 - 110 l/min (3/4 BSP)

Ordering example
Product number Supersedes
FS643332212 FS.643 332 212
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

286 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 50
 Flowmeters & Monitors

Hydraulic Test Equipment

Features & Benefits

Speedy diagnosis of hydraulic circuit faults.

Flows ranging from 2 to 360 l/min.
Measuring flow, pressure and temperature.
Fully Portable – No power source required.
Hydrotrac unit for flows from 2 to 110 I/min available.
Designed for oil applications only.

Specification Troubleshooting Test Units

Flow range: Hydraulic Test Units are designed specifically for the speedy
2 to 360 I/min. diagnosis of hydraulic circuit faults in mobile, marine and
Pressure range: industrial systems using the normal range of mineral oils. Their
1 to 350 bar.
rugged construction based mainly on mild steel, manganese
Temperature range: bronze and acrylic materials makes them ideally suited for
0°C to +90°C.
arduous use in the field.
Each unit is supplied in a convenient carrying case providing
Installation Details full protection and additional storage space for fittings.
Because they need no power source such as batteries etc,
B
they are always ready for instant use.
6 models are available to cover flow capacities up to 360 I/min
and each incorporates a direct reading, uni-directional flow
A A/F HEX

meter. The meter, which is both self cleaning and reasonably

ØC

tolerant of contaminated fluids is coupled to a manifold that

houses a glycerine-filled pressure gauge calibrated 0 to 350
bar and a dial-type thermometer with a 0°C to 100°C range.
Safety Unit can only operate up to 90°C.

An axial flow restrictor valve is fitted which can be adjusted For further convenience the scale on the flow meter can be
under full load from open to fully closed, and to complete the rotated to ensure visibility in any situation and the installed
specification, a safety blow-out disc, set to fail at 455 bar attitude of the assembly is not critical, though whenever possible
is fitted to the manifold in a position facing away from the the unit should be mounted with pressure gauge vertical and
operator when reading the gauges normally. Two spare blow- gauge case relief valve uppermost. The unit is designed for flow
out discs are supplied which are easily replaced by removing to be in the direction of the arrow on the flowmeter scale and
the hexagonal plug on the gauge manifold. must not be installed with the flow reversed.

Additional blow out discs can be ordered - 41203B (Bag of 10)

Ordering Information
Standard products table
Product number Flow range (I/min) Weight Kg Dimensions (mm)
(with case) A B C
4121 10 - 110 7.4 46 350 35
4120 5 - 55 7.4 46 350 35
4123 2 - 110 11.8 46 350 35
4168 20 - 180 13.85 75 496 87
4169 30 - 270 13.85 75 496 87
4170 40 - 360 13.85 75 496 87
Part number Supersedes Description
41203B 4120.3.B Safety blow out discs x 10
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Note 3: 4123 ‘Hydrotrac’ unit features 2 flowmeters (2 - 20 and 10 - 110 l/min) and 1 pressure gauge and 1 thermometer.
Flowmeters & monitors
Parker Hannifin 287
Hydraulic Filter Division Europe
FDHB200UK. Section 51
 Flowmeters & Monitors

Flow Products - For Compressed

Air Applications
Features & Benefits

A Flowline Flowswitches and B Loflow Air Flowmeters

Flowmeters Flow measurement from 1.1 to
Calibrated for direct reading 720 l/min. Max 10 bar rating.
of compressed air at 7 bar.
Works in any plane. C Compressed Air Test
Brass or stainless steel Equipment
A models available in 4 sizes. 6 models available – 1/4”, 3/4”
Calibrated at 7 bar and 20°C. and 11/4” BSP.
C Flow ranges from 2 to 600 SCFM. Air flow range 2 to 600 SCFM.
Pressure 1-41 bar max.
B Pressure 1-41 bar max.
Optional reed switch upgrade.

D
Specification
A A/F HEX

Full technical specifications for the Flowmeter,

ØC
Flowswitch, LoFlow and test equipment products are
provided in the respective pages for these products.

Note: To add an electrically operated reed switch to your flowmeter

please order B.26307
Ordering Information

Standard products table Standard products table - LoFlow

Brass flowmeter for air Flow range Product Supersedes Ports (BSPT Flow range Float
number male) material
Product number Supersedes Ports SCFM l/sec Maximum working
BSP pressure (bar) LF801450 LF.3007E 1
/4 - 3
/4 1.1 - 8.0 l/min Acetal
FM26123332 FM.26 123 332 1
/4 2 - 20 1 - 10 41 LF802455 LF.3050E 3
/4 - 3
/4 10 - 50 l/min Acetal
FM26223132 FM.26 223 132 1
/2 5 - 50 2 - 25 41 LF802452 LF.3135E 3
/4 - 3
/4 20 - 135 l/min Acetal
FM26223232 FM.26 223 232 1
/2 10 - 110 5 - 50 41 LF802454 LF.3720E 3
/4 - 3
/4 2 - 12 l/sec S/Steel
FM26323132 FM.26 323 132 3
/4 15 - 125 6 - 60 41 LF801451 LF.3021E 1
/4 - 3
/4 4 - 22 l/min S/Steel
FM26323232 FM.26 323 232 3
/4 20 - 225 10 - 100 41 LF802453 LF.3330E 3
/4 - 3
/4 1.0 - 5.5 l/sec S/Steel
FM26423132 FM.26 423 132 11/4 40 - 400 20 - 200 25
FM26423232 FM.26 423 232 1 /4
1
60 - 600 30 - 300 25

Standard products table

Stainless steel flowmeter for air Flow range

Product number Supersedes Ports SCFM l/sec Maximum working

BSP pressure (bar)
FM26133332 FM.26 133 332 1
/4 2 - 20 1 - 10 41
FM26233132 FM.26 233 132 1
/2 5 - 50 2 - 25 41
FM26233232 FM.26 233 232 1
/2 10 - 110 5 - 50 41
FM26333132 FM.26 333 132 3
/4 15 - 125 6 - 60 41
FM26333232 FM.26 333 232 3
/4 20 - 225 10 - 100 41
FM26433132 FM.26 433 132 11/4 40 - 400 20 - 200 41
FM26433232 FM.26 433 232 11/4 60 - 600 30 - 300 41

Product configurator Ordering example

Brass flowswitch for air Product number Supersedes
Product number Flow range SCFM and (l/sec) Ports (BSP) Fluid type FS643323232 FS.643 323 232
FS643 2 switches 2231 5 - 50 (2 - 25) 1
/2 32 Air
FS67A Intrinsically safe high switch 2232 10 - 110 (5 - 50) 1
/2
FS67B Intrinsically safe low switch 3231 15 - 125 (6 - 60) 3
/4
3232 20 - 225 (10 - 100) 3
/4

Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.
Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

288 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 52
Understanding and Answering the Threat of Contamination

Guide to
Contamination Control

Guide to contamination control

289
 Understanding and Answering the Threat of Contamination

Guide to Contamination Control

The Threat of Contamination

Industry requirements with regard to hydraulic and oil Types of Failures

lubrication systems emphasise reliability, long lifetime and
Component failure is often an invisible process. In general
reduced energy use. Depending on the circumstances,
three types of failure can be distinguished:
some 70 - 80% of system failures are due to contamination.
Cleanliness monitoring is essential in contamination control,
as is selecting the right filter components. The first step, 1. Catastrophic Failures
however, is understanding the specific system requirements
This failure occurs suddenly and without warning; it is of a
and local operating conditions.
permanent nature. It is often caused by larger sized particles
entering a component and obstructing the relative movement
This guide to contamination control describes: between surfaces, resulting in seizure of the component.
- Types of failures
- Sources of contamination 2. Transient Failures
- Fluid cleanliness level
Generally speaking, this type of failure is short-lived and goes
- Condition monitoring equipment
unnoticed, although the consequences rarely do. It is caused
- Cleanliness service
by particles that momentarily interfere with the function of
- Filtration: parameters and facts
a component. The particles lodge in a critical clearance
- Filter selection and filter types
between matching parts, only to be washed away during the
next operation cycle. As a result, components become less
predictable and thus unsafe.

3. Degradation Failures
Gradual deterioration in the performance of a component
results in its eventual repair or replacement. This failure is
caused by the effect of wear induced by contamination.
Additional generated contamination can lead to a catastrophic
failure. Failures or reduced system performance have a direct
impact on the cost of ownership, the efficiency rate and the
perceived quality perception of the end users.

290 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 53
Sources of Contamination

Finding the balance

What does it take to implement system-matched filtration?
A review of the sources of contamination is the first step in
finding the balance between the performance of the filtration
system and the system demands.

Built-in Contamination

Natural Contamination

Filter media pleating

Ingressed Contamination
2. Natural Contamination
In general, the cleanliness level of new oil does not always
meet the requirements of the system. Despite the efforts
Generated Contamination to control the fluid cleanliness level during the production
processes, transport and distribution may contaminate the oil.
Depending on the requirements for system cleanliness, we
advise that you filter new oil before usage.
Catalytic Effect
3. Ingressed Contamination
Systems are always under attack from contamination.
Unfortunately it is not possible to avoid ingressed
FAILURE contamination. Air breathers, cylinder rod seals, wiper seals,
component seals or poorly fitted covers are a few examples
of system parts that may have an important influence on the
amount of ingressed contamination.
Sources of Contamination
4. Generated Contamination
Several sources of contamination must be taken into account
when it comes to the effective implementation of system- Particles generate particles. This phenomenon is known as
matched filtration. Without adequate filtration, the protection of abrasion. Other processes like cavitation, corrosion, erosion,
the system is jeopardised and component or system failure is fatigue and metallic contact between moving parts generates
imminent. System-matched filtration changes the deterioration particles and thus influences the contamination that is already
into a balanced situation, representing the continuously present in the system. Even though these processes cannot
controlled process that is needed to achieve system reliability. always be avoided, their impact is strongly influenced by
Realising this is only possible when the required fluid effective filtration.
cleanliness levels are maintained.
5. Catalytic Effect
1. Built-in Contamination
During the filter selection process, attention is generally given
Residual contamination from the manufacturing and assembly to the removal of solid, hard-type contamination only. The
processes cannot be avoided. Examples are machining performance of hydraulic and lubrication fluids is influenced
debris, weld spatters, casting sand, paint, pipe sealant or by the catalytic effect. As a result of the catalytic effect, the
fibres from cleaning rags. Flushing system components prior lifetime of the oil is significantly reduced.
to assembly and decent housekeeping during the various
stages of the assembly process are a must to reduce the
amount of built-in contamination.

Guide to contamination control

291
 Understanding and Answering the Threat of Contamination

Guide to Contamination Control

Lifetime of Oil

Selecting the Right Oil The Balance between System Requirements and
Filtration System Performance
Oils are selected based on their unique performance with
regard to: Parker’s philosophy exceeds the traditional approach of
protecting the system by means of filtration.
a. Energy transfer
b. Corrosion protection
c. Cooling (transfer of heat) Built-in Contamination
d. Lubrication
The lifetime of oils is influenced by the amount of oxygen, oil
temperature, water content and presence of catalyser type Natural Contamination
elements. The allowed water content varies for each type of
oil. Due to, for example, seal leakage or condensation, the
water content can easily reach concentrations far above the
allowed water content value. The combination of water and Ingressed Contamination
wear elements like iron or copper causes a catalytic effect and
as a result, reduces the lifetime of the oil. The lifetime of oil is
also influenced by the amount of generated static electrics.
Generated Contamination

Lifetime Reduction
Catalytic Effect
The lifetime reduction of oil is expressed by the degradation
factor. The influence of the catalytic effect of the degradation
factor is shown below.

System-matched filtration is not limited to a filter alone. The

process of system-matched filtration is based on the correct
implementation of suitable filtration products, taking into
account the requirements from the hydraulic or lubrication
fluids, system components and customer expectations.

Contamination Control
Achieving the required system protection implicates a correct
Source: Diagnetics Inc.
understanding of the system. Today filters are selected based
Oil degradation can reduce the protection against corrosion and lubrication performance. on several parameters like ß-values, pressure drop and dirt
holding capacity.
Regular oil analysis is important to monitor the condition of
the hydraulic or lubrication fluid. This analysis is also used to Filtration is built-in safety, meant to achieve and maintain
obtain information related to the process of selecting system- the required fluid cleanliness level during a defined period.
matched filter components. This implicates a more detailed approach, which can only be
realised when several filtration parameters are considered.

Before Filtration

Tanktopper II return line filter with integrated air breather and patented LEIF ® element
After Filtration

292 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 53
Contamination & Cleanliness Level
Sizes of Contamination The ISO 4406:1999 standard is an important code to define
Filters are selected to capture contamination from hydraulic the fluid cleanliness level using a solid contamination code.
and lubrication fluids. This ISO code is determined by allocating a first scale number
Contamination is an invisible enemy. The human eye to the total number of particles larger than 4µm, allocating
cannot see particles smaller than 40 micron. For the correct a second scale number to all particles larger than 6µm and
understanding a comparison is given below. allocating a third scale number to the total number of particles
larger than 14µm.
In the recent past, the fluid cleanliness level code was
determined using the ISO 4406:1987 standard. Instead of
counting particles sizes 4, 6 and 14µm, the fluid cleanliness
level was determined by counting particles larger than 5 and
15µm. The particle size 2µm was added later.
As a result of upgrading the ISO standards, new particle sizes
have been defined. In general, the fluid cleanliness code will
not change as a result of this new standard. Built-up historic
data remains directly comparable to new data.

100 micrometers 70 micrometers ISO 4406:1999 cleanliness classes

Grain of salt Diameter of human hair

40 micrometers 25 micrometers 8 micrometers 2 micrometers

Number of particles per 100 millilitres greater than indicated size

Limit of visibility to White blood cells Red blood cells Bacteria

Filtration
the naked eyeof hydraulic and lubrication fluids will effectively stop
particles varying in size from millimetres to 1 micron.

Fluid Cleanliness Level

Component Microns
Anti-friction bearings 0.5
Vane pump (vane tip to other ring) 0.5 - 1
Gear pump (gear to side plate) 0.5 - 5
Servo valves (spool to sleeve) 1-4
Hydrostatic bearings 1 - 25
Piston pump (piston to bore) 5 - 40
Servo valves flapper wall 18 - 63
Actuators 50 - 250
Servo valve orifice 130 - 450
Typical hydraulic component clearances are given as an indication only

Particle size, micrometers

Guide to contamination control

293
 Understanding and Answering the Threat of Contamination

Guide to Contamination Control

Cleanliness Level

Examples of cleanliness level are given in the ISO graph. Solid Contaminant Codes
These lines represent:
In addition to ISO 4406: 1999, other standards are used to
A. Low-pressure systems (code 21/20/17) express the fluid cleanliness level. A comparison between the
B. Low-pressure control systems (code 19/18/14) codes is given below.
C. Sophisticated pumps/motors control valves
(code 18/17/13) ISO 4406: 1999 ISO 4406: 1987 NAS 1638 CLASS
D. Highly sophisticated systems and hydrostatic 13/11/8 11/8 2
transmissions (code 16/15/11) 14/12/9 12/9 3
E. Sensitive servo systems (code 15/14/10)
15/13/10 13/10 4
F. High performance sensitive systems (code 12/11/8)
16/14/9 14/9 -
16/15/11 14/10 5
We recommend verifying the required cleanliness level based
on the components used for the system. Manufacturers of 17/15/9 15/9 -
system components often provide information related to the 17/15/10 15/10 -
required fluid cleanliness level for their products. 17/15/12 15/12 6
18/16/10 16/10 -
Condition Monitoring Equipment 18/16/11 16/11 -
Over the years, fluid condition monitoring has become 18/16/13 16/13 7
increasingly important. By offering system-matched filtration 19/17/12 17/12 -
solutions, the stringent customer demands related to
19/17/14 17/14 8
extended component lifetime or improved system reliability
can be met. Parker has developed a complete range of 20/18/12 18/12 -
instruments and components for maintenance programmes 20/18/13 18/13 -
and local fluid condition analysis such as the LaserCM below. 20/18/15 18/15 9
21/19/13 19/13 -
21/19/16 19/16 10
22/20/13 20/13 -
22/20/17 20/17 11
Note:
ISO 4406: 1987 is based on particle sizes larger than 5 and 15µm
ISO 4406: 1999 is based on particles sizes larger than 4, 6 and 14µm

Several Cleanliness Levels

16/14/10 18/17/12

LaserCM

Parker’s particle counters are well known for their accurate

performance in the field or in a production line environment.
Lightweight portable particle counters can be used for
temporary fluid cleanliness measurements.
The MCM20, designed for permanent installation, is meant for
continuous fluid monitoring. The compact MS100 and MS150
moisture sensor together with the H2Oil means a complete
solution is available to measure the water content in hydraulic
or lubrication fluids.
20/18/14

22/21/16 24/23/18

294 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 53
Cleanliness Service

Cleanliness Service to Prevent Failures Filtration: Parameters and Facts

As Parker has no financial interest in the oil industry, the Generally speaking, fibre-type materials like cellulose and glass
company can operate as an independent laboratory. The fibre are applied for hydraulic and lubrication fluid filtration.
development laboratory at Parker Filtration BV in Arnhem Filters are selected based on the following parameters:
- the only laboratory of its kind in Belgium, the Netherlands
- Required protection of system components
and Luxembourg - has at its disposal all the facilities for its
extensive R & D department. In addition, the services are - Location of filter(s) in the system
offered on a commercial basis to third parties.
- Flow rate and allowed pressure loss

Equipment - Desired filter element life time

The laboratory uses state-of-the-art test equipment. The - Hydraulic or lubrication fluid type
company has invested in the latest Karl Fischer coulometric The dirt holding capacity is the amount of solid contamination
equipment, that prevents tests from being influenced by, a filter can hold before the filter material is plugged. This value
among other things, additives in the oil. The particle-counting is measured in accordance to ISO 16889 using ISO MTD
equipment is calibrated according to the recent ISO 11171 test dust. The filter element lifetime strongly depends on the
standard. It is now possible to indicate the measured contamination conditions that are present in the system and
cleanliness according to ISO 4406:1999. its environment.
Predicting the filter element lifetime in the system is
Standard Test complicated, because of the variety in contamination (e.g.
The high-quality standard test, carried out in Parker’s metal, sand and fibres, each with a certain distribution of
laboratory, consists of a water analysis and a cleanliness particle sizes) in relation to the specified dirt holding capacity.
calculation according to ISO 4406, the new ISO 4406:1999
and the NAS 1638 standard, as part of which particles from Degree of Filtration
2 to 100µm are measured and reported. Membrane research
and digital photography of the membrane are also part of Parker’s filtration philosophy is based on the optimum
the standard test. The results of each test are described in a distribution of several particle sizes by using the complete
report that contains clear conclusions. It is also possible to thickness of glass fibre layers.
conduct a spectral analysis.
Pre-layer

In Practice
How do the laboratory services work? Only three days after
receipt of the oil sample, the standard analysis is completed.
The results of a spectral analysis are known after seven days.
The reports can be sent directly and completely by e-mail.
A free sample bottle is available upon request.

Main layer

Each selected filter layer has a unique performance for the

removal of solid contamination. System-matched filtration
implicates the removal of harmful particles. For some
systems an improved removal efficiency for smaller sized
particles is more important compared to other systems using
components. The combination of pre- and main layers results
in an achievable fluid cleanliness level. The complete package
of filter and support layers is indicated as pleat pack.

Guide to contamination control

295
 Understanding and Answering the Threat of Contamination

Guide to Contamination Control

Degree of Filtration

The ß-value is used to express the removal efficiency for a The overall removal efficiency of the element forms the core of
defined particle size. fluid cleanliness levels
The correct degree of filtration is chosen based on the
N particles upstream > ßx µm N particles downstream > ßx µm
required fluid cleanliness level, not based on one ß-value.

1000

ßx(c) = N particles upstream > x µm / N particles downstream > x µm

The ISO 4572 standard formerly required only the ßx>75 200
value. That standard has now been upgraded and replaced by 100

ISO 16889, reporting the ß-value of 2, 10, 75, 100, 200 and 75
1000 for each filter medium or pleat pack. The corresponding
efficiencies are given below.
ß-value 2 10 75 100 200 1000 Beta 10

Efficiency 50,00% 90,00% 98,67% 99,00% 99,50% 99,99%

Taking into account a ß75(c)>10 element, the removal 2

efficiency is 98.67% of particles larger than 10 micron. 1

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

Too often filter elements are compared by looking at one Micron

ß-value only. The focus on high ß-values is misleading and Q3-1 Q3-2 Q3-5 Q3-10 Q3-20

does not always provide the required information.

An indication of recommended fluid cleanliness levels is
Filter Filter given in this table. It is common use in the industry that
Comparison ß-value element I element II manufacturers of components prescribe required fluid
Beta-value ß-75(c)>10 ß-200(c)>10
cleanliness level for the reliable functioning of their products.
Number of particles at upstream of filter >10 micron 5,000,000 5,000,000
Removal efficiency 98,67% 99,50%
Number of particles at downstream of filter >10 micron 66,500 25,000 Components ISO Code
Servo control valves 16/14/11
Statements that a ß200 filter improves the fluid cleanliness Proportional valves 17/15/12
level by a factor 2.6 (66,500/25,000) are misleading. Fluid
cleanliness codes are based on several particle sizes. More Valve & piston pumps/motors 18/16/13
information is needed to determine the overall removal Directional & pressure control valves 18/16/13
performance of filter media. Gear pumps/motors 19/17/14
A comparison between two 10-micron filter medias. Flow control valves 20/18/15
Cylinders 20/18/15

The ISO codes are indicative values only.

Filter element (blue) I: ß10(c)>75, Filter element (red) II: ß10(c)>200

Filter element II has a lower removal efficiency for smaller

sized particles. Smaller sized particles can easily flow
in narrow tolerances areas. Smaller sized particles will
accelerate the amount of generated contamination,
effecting the functionality of other system components and
accelerating oil degradation.
Filter media composition

296 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK. Section 53
Flow Rate & Pressure Lost

Flow Rate and Allowable Pressure Lost Filter Types and Locations
Each filter element is designed to handle a nominal flow rate.
The allowed flow rate depends on fluid viscosity, degree of
filtration, and the amount of pressure that is lost. Indirectly, the
required element lifetime is an important parameter. A larger
sized element with a more effective filter element area has a
positive influence on the element lifetime.
Media Degree of filtration Upper range Lower range
Q3 3 16/14/10 13/11/8
Q3 6 18/16/13 17/15/9
Q3 10 20/18/15 19/17/12
Q3 20 22/20/17 21/19/13

The given cleanliness levels are indicative values only, based on average values

Filter elements are chosen based on their initial clean element

pressure drop. It is preferred to apply a ratio of at least three
between element bypass settings and element initial pressure
drops.
Depending on the filter type and corresponding location, a
Life time diagram
general pressure lost recommendation can be given
Suction Line: 0.03-0.05 bar
Pressure Line: 1 bar
Return Line: 0.3-0.5 bar
Suction Return Filter: 1 bar

Comparing filter elements with different filter media based

on the initial clean element pressure drop does not give a
reliable indication of the element dirt holding capacity. In this
example the filter media A has a higher initial pressure drop.
However, during its lifetime the pressure lost is more constant
compared to media B. This results in a longer element lifetime.
The difference in performance is caused by a more effective
distribution of captured particles in media A.

Guide to contamination control

297
Notes

298 Parker Hannifin

Filter Division Europe
FDHB200UK.
Notes

299
Important Information

! WARNING-USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR
RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
– This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide
product or system options for further investigation by users having technical expertise.
– The user, through their own analysis and testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, endurance, maintenance, safety and warning requirements of the applications
are met.
The user must analyse all aspects of the application, follow applicable industry standards, and follow the information
concerning the product in the current product catalogue and in any other materials provided from Parker or its subsidiaries or
authorized distributors.
– To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data
or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and
sufficient for all applications and reasonably foreseeable uses of the components or systems.
The operation of the products described here in is subject to the operating and safety procedures details of which are available
upon request.
Sales conditions
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized
distributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parker’s standard terms and
conditions of sale (copy available upon request)

300 Parker Hannifin

Hydraulic Filter Division Europe
FDHB200UK.
 Throughout the world, Parker is serving more than 400,000 customers to improve productivity and reliability in thousands of industries.
Parker motion and control systems are in operation on satellites orbiting the Earth, in machine tools and mobile equipment, on oil rigs and
refineries, in hospitals and laboratories, in fact, wherever there’s a need for motion and control, you’ll find Parker components and system
solutions hard at work. For more information, visit Parker’s web site at www.parker.com/eu or call freefone 00800 27 27 5374

Aerospace
Key Markets Key Products
• Commercial transports • Flight control systems and components
• Military aircraft • Hydraulic systems and components
• Regional transports • Fuel systems and components
• Aircraft engines • Pneumatic systems and components
• Business and general aviation • Inert oxygen generating systems
• Fluid metering, delivery and atomization devices
• Wheels and brakes
• Couplings, fittings, hoses and tubes

• Consistent quality Hydraulic, Lubrication &

Coolant Filtration Automation

• Technical innovation High-performance filtration

systems for production
Key Markets
• Factory automation
Key Products
• Pneumatic motion and control
• Transportation and automotive • Air preparation

• Premier customer service machinery in industrial, mobile

and military/marine applications.
•
•
•
Life sciences and medical
Machine tools
Semiconductor and electronics
•
•
•
Vacuum controls and sensors
Electromechanical stepper and servo motors, drives, and controls
Human machine interface
• Electric actuators, gantry robots, slides and linear motors
• Structural extrusion

Parkers technical resources provide the Climate & Industrial Controls

correct filtration technologies that conform Compressed Air & Key Markets Key Products
to your requirements. That’s why thousands Gas Filtration •
•
Refrigeration and air conditioning
Transportation/mobile
•
•
Pressure regulators
Check, ball and service valves
of manufacturers and equipment users around Complete line of compressed • Process • Value-added systems
• Industrial machinery • Thermostatic and expansion valves
the world rely on Parker Filtration products air/gas filtration products; • Medical/life sciences • Electronic controllers
• Fuel cells • Contaminant controls
and people. coalescing, particulate and • Precision cooling • Heating/air conditioning hose
adsorption filters in many • Gerotors

applications in many
Filtration
Worldwide Sales industries.
Photo courtesy of GLASBAU HAHN.
Key Markets Key Products
• Industrial machinery • Hydraulic, lubrication and coolant filters

and Service Process & Chemical •

•
Process
Mobile
•
•
Process, chemical, water and microfiltration filters
Compressed air and gas purification filters
Fluid Filtration • Marine • Condition monitoring
• Oil & gas • Analytical gas generators
Parker Filtration’s global reputation as a reliable Liquid filtration systems for •
•
Power generation and energy
Transportation
•
•
Nitrogen, hydrogen and zero air generators
Engine air, fuel, oil filtration and systems
supplier of superior filtration products is the result beverage, chemical and food • Food and beverage
processing; cosmetic, paint,
of a focused and integrated development and
water treatment; photo- Fluid Connectors
manufacturing system. processing; and micro-chip
Key Markets Key Products
fabrication.
Parker Filtration consolidates quality filtration •
•
Construction machinery
Agriculture
•
•
Rubber and thermoplastic hose
Industrial hose
products, manufactured by process filtration, air Racor Fuel Conditioning
•
•
Transportation
Mobile
•
•
Tube fittings and adaptors
Tubing and plastic fittings
and gas filtration and separation, fuel conditioning & Filtration
•
•
Industrial machinery
Oil & gas
•
•
Brass fittings and valves
Hose couplings
and filtration, hydraulic and lubrication filtration, • Quick disconnects

fluid power products and fluid condition monitoring Parker air, fuel and oil filtration
systems provide quality Hydraulics
equipment into one broad-based range that protection for engines
covers many markets and most applications, operating Key Markets Key Products
• Construction machinery • Hydraulic cylinders and accumulators
as detailed here. in any environment, anywhere • Agriculture • Hydraulic valves and controls
• Industrial machinery • Hydraulic motors and pumps
in the world. • Oil & gas • Power take-offs
• Truck hydraulics • Hydraulic systems
• Power generation and energy
System Contamination
Monitoring
Instrumentation
On-line dynamic particle
Key Markets Key Products
analysis, off-line bottle • Power generation • Medium/high pressure fittings and valves
sampling and fluid analysis and • Oil & gas • Instrumentation fittings, valves, manifolds and regulators
• Petrochemical • High purity fittings, valves and regulators
measurement of water content • Microelectronics • Fluoropolymer fittings, valves, pumps and regulators
polluting the oil in a system. • Biopharmaceutical • Analytical systems

All important and achievable,

cost-effective solutions available
to equipment manufacturers Seal
and end users alike. Key Markets Key Products
• Transportation • Elastomeric O-rings
• Energy, oil & gas • Homogeneous and inserted elastomeric shapes and diaphragms
• Semiconductor • Metal and plastic retained composite seals
• Aerospace • Polymeric and plastic dynamic seals
• Fluid power • Rubber and plastic boots/bellows
• Life sciences • Extruded and precision-cut/fabricated elastomeric seals
• Telecommunications • Thermoplastic engineered seals

Parker Hannifin
Hydraulic Filter Division Europe
FDHB200UK.
Sales Offices

AE – United Arab Emirates, HK – Hong Kong SL – Slovenia, Novo Mesto

Abu Dhabi Tel: +852 2428 8008 Tel: +386 7 337 6650
Tel: +971 2 67 88 587
HU – Hungary, Budapest SK – Slovakia
AR – Argentina, Buenos Aires Tel: +36 1 220 4155 See Czech Republic
Tel: +54 3327 44 4129
IE – Ireland, Dublin TH – Thailand, Bangkok
AT – Austria, Wiener Neustadt Tel: +353 (0)1 466 6370 Tel: +662 717 8140
Tel: +43 (0)2622 23501-0
IN – India, Mumbai TR – Turkey, Merter/Istanbul
AT – Austria, Wiener Neustadt Tel: +91 22 6513 7081-85 Tel: +90 212 482 91 06 or 07
(Eastern Europe)
IT – Italy, Corsico (MI) TW – Taiwan, Taipei
Tel: +43 (0)2622 23501 970
Tel: +39 02 45 19 21 Tel: +886 2 2298 8987
AU – Australia, Castle Hill
JP – Japan, Fujisawa UA – Ukraine, Kyiv
Tel: +61 (0)2-9634 7777
Tel: +(81) 4 6635 3050 Tel +380 44 494 2731
AZ – Azerbaijan, Baku
KR – South Korea, Seoul UK – United Kingdom,
Tel: +994 50 2233 458
Tel: +82 2 559 0400 Warwick
BE – Belgium, Nivelles Tel: +44 (0)1926 317 878
KZ – Kazakhstan, Almaty
Tel: +32 (0)67 280 900
Tel: +7 3272 505 800 US – USA, Cleveland
BR – Brazil, Cachoeirinha RS (Industrial)
LV – Latvia, Riga
Tel: +55 51 3470 9144 Tel: +1 216 896 3000
Tel: +371 74 52601
BY – Belarus, Minsk US – USA, Lincolnshire
MX – Mexico, Apodaca
Tel: +375 17 209 9399 (Mobile)
Tel: +52 81 8156 6000
Tel: +1 847 821 1500
CA – Canada, Milton, Ontario
MY – Malaysia, Subang Jaya
Tel: +1 905 693 3000 US – USA, Miami
Tel: +60 3 5638 1476
(Pan American Division)
CH – Switzerland
NL – The Netherlands, Tel: +1 305 470 8800
See Germany
Oldenzaal
VE – Venezuela, Caracas
CN – China, Shanghai Tel: +31 (0)541 585 000
Tel: +58 212 238 5422
Tel: +86 21 5031 2525
NO – Norway, Ski
ZA – South Africa,
CN – China, Beijing Tel: +47 64 91 10 00
Kempton Park
Tel: +86 10 6561 0520
NZ – New Zealand, Mt Wellington Tel: +27 (0)11 961 0700
CZ – Czech Republic, Klecany Tel: +64 9 574 1744
Tel: +420 284 083 111
PL – Poland, Warsaw
DE – Germany, Kaarst Tel: +48 (0)22 573 24 00
Tel: +49 (0)2131 4016 0
PT – Portugal, Leca
DK – Denmark, Ballerup da Palmeira
Tel: +45 43 56 04 00 Tel: +351 22 999 7360
ES – Spain, Madrid RO – Romania, Bucharest
Tel: +34 902 33 00 01 Tel: +40 21 252 1382
FI – Finland, Vantaa RU – Russia, Moscow
Tel: +358 (0)20 753 2500 Tel: +7 495 645-2156
HYGE Ed. 2007-09-17

FR – France, SE – Sweden, Spånga

Contamine-sur-Arve Tel: +46 (0)8 59 79 50 00
Tel: +33 (0)4 50 25 80 25
SG – Singapore
GR – Greece, Athens Tel: +65 6887 6300
Tel: +30 210 933 6450

© 2007 Parker Hannifin Corporation. All rights reserved. Catalogue FDHB200UK. 11/2007

Parker Hannifin Ltd

Tachbrook Park Drive
Tachbrook Park, Warwick CV34 6TU
United Kingdom
Tel.: +44 (0) 1926 317 878
Fax: +44 (0) 1926 317 855
www.parker.com/eu Your local authorized Parker distributor