Scribd
Upload
74 views5 pages

AQUA - POND Automation - Sir CRR

This document proposes a preliminary study to automate counting of parking tiles using computer vision. The system will use sensors like cameras and IR sensors along with a Raspberry Pi to count tiles and check quality at the manufacturing site. Data will be sent via GSM to a receiver station that stores data in the cloud and provides a GUI for managers. The objectives are to develop a robust and economical automatic system for quality checking and counting tiles. It provides a budget estimate of Rs. 25,000 and work plan to complete data collection, implementation, and documentation within 3 months. The deliverables will include report submissions and development boards for pond automation.

Uploaded by

P h s Tejo murthy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
74 views5 pages

AQUA - POND Automation - Sir CRR

This document proposes a preliminary study to automate counting of parking tiles using computer vision. The system will use sensors like cameras and IR sensors along with a Raspberry Pi to count tiles and check quality at the manufacturing site. Data will be sent via GSM to a receiver station that stores data in the cloud and provides a GUI for managers. The objectives are to develop a robust and economical automatic system for quality checking and counting tiles. It provides a budget estimate of Rs. 25,000 and work plan to complete data collection, implementation, and documentation within 3 months. The deliverables will include report submissions and development boards for pond automation.

Uploaded by

P h s Tejo murthy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

PRELIMINARY STUDY OF Parking tiles counting using computer vision

Project Proposal
Submitted
to
Sri Krishna parking tiles manufacturing and sales
Industrial estate , eluru

by
Student Coordinators
Manohar
vaishnavi
P Vijaydeep
Sk Khalid
Staff Coordinators
Dr. T Venkateswararao Rao
Dr. P H S Tejo Murthy
Dr R satish

Department of Electronics and Communication Engineering


Sir.C.R.Reddy College of Engineering
Eluru-534007, Andhra Pradesh
January, 2018

1
1..Introduction:

Parking tiles are manufactured in three step process. First step is to mix the cement with sand
in pan mixer and second is to pour the cement in the moulds. Third step is to send the moulds
through the vibrator. Every day count of parking tiles and quality of tiles is required to caliculate
manually. It is time taking and need extra man power to validate the people.

Need for automation in parking tiles count and quality check:

Parking tiles Quality determines the ultimate Success or Failure of the industry.

 The workers and managers must measure, record and manage


 But some due to other works managers may neglect the quality some times workers also
give more or less count than the original.

Tiles Quality Parameters:

 Color
 Cracks
 smoothness

 Limitations of Conventional Methods:

Manages has to take water time for observing and counting

 Expensive
 Difficult Process
 Time Consuming

2. Objectives:

 To build the automatic system for checking the quality and parking tiles count.
 To develop more robust and economical system

2
3. Implementation and Methodology (Proposed System):

Fig.1 Architecture Parking tiles counting system

The architecture of proposed system is shown in figure 1.This system consists of two
modules which are transmitter station and receiver station. The transmitter station consists of
sensor nodes such as camera and IR sensor. The Raspberry Pi is a low cost, credit-card sized
computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse.

The receiver station consists of GSM module for receiving the sensing data from
transmitter through GSM network/ IOT Module. The receiver station receives data through the
com port and stores in Cloud in order to achieve human-computer interface. The graphical user
interface was designed, so that Managers can observe, investigate and analyze the related data.
The user interface allows us to convey the analyzed data in the form of a message to the farmers
in their respective local languages to their Mobile Phones and alerts them in unhygienic
environmental conditions.

Budget Estimation towards proposal of real time water quality monitoring system for aqua ponds

S.No Equipment Approximate


. Cost in Rs.
1. Raspberry Pi 4000.00
2. sensors(camera 21,000.00

3
and IR sensors
etc)
Total Cost 25,000.00

* Partial fiancé assistance is required

4. Work Plan and Schedule

The work plan and schedule of the project is as follows:


S.No Milestone Target Month Work Elements
Within the first week and  Preliminary Survey and Field
1 Field Visits
intermittent thereafter. visits
Data Collection and  Complete design and board
2 Within the next 2 weeks
implementation devolopment
At the end of reconnaissance
3 Documentation  Preparation of report
survey

4
5. Schedule of the Project

Time Frame in days

Project
Activity 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Field                                        
Visits
Data
Collection
, Analysis
&impleme                                        
ntation
Document
                                       
ation

6. Deliverables
a. Consultant to submit 3 hard copies each of the reports on PRELIMINARY STUDY OF REAL
TIME WATER QUALITY MONITORING FOR AQUA PONDS and development boards for
the use of fish pond automation

You might also like