Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
Section 1 - PRODUCT AND COMPANY IDENTIFICATION
Material Name
EPI Dry Polymer
Details of the supplier of the safety data sheet
Electrochemical Products Inc.
17000 West Lincoln Ave
New Berlin, WI 53151
Phone: 262-786-9330
Emergency Phone #: Chemtrec #800-424-9300 (CCN7498)
E-mail: us-sales@epi.com
www.epi.com
Fax: 262-786-9403
Section 2 - HAZARDS IDENTIFICATION
Classification in accordance with paragraph (d) of 29 CFR 1910.1200.
None needed according to classification criteria
GHS Label Elements
Symbol(s)
None needed according to classification criteria
Signal Word
None needed according to classification criteria
Hazard Statement(s)
None needed according to classification criteria
Precautionary Statement(s)
Prevention
None needed according to classification criteria
Response
None needed according to classification criteria
Storage
None needed according to classification criteria
May cause mild eye or skin irritation.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations
Other Hazards
____________________________________________________________
Page 1 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
May cause burning or watering of eyes. May irritate mucous membranes if mists are inhaled. This product
may be harmful if it is swallowed.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
CAS Component Name Percent
NA0001 Anionic Polymer 0.1-0.5
Section 4 - FIRST AID MEASURES
Inhalation
If inhaled, immediately remove the affected person to fresh air.
Skin
Wash skin with soap and water.
Eyes
Flush immediately with water for at least 15 minutes. Do not rub eyes. If irritation persists, get medical
attention.
Ingestion
If swallowed, give milk or water to dilute. Seek medical attention immediately. Never give anything by
mouth to an unconscious person. Call a physician immediately.
Section 5 - FIRE FIGHTING MEASURES
Extinguishing Media
Suitable Extinguishing Media
Dry chemical, foam, carbon dioxide, water fog.
Unsuitable Extinguishing Media
None identified.
Special Hazards Arising from the Chemical
None identified.
Hazardous Combustion Products
None identified.
Advice for firefighters
None identified.
Fire Fighting Measures
____________________________________________________________
Page 2 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
Use methods suitable to fight surrounding fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment and Emergency Procedures
Wear protective gloves and eye/face protection.
Methods and Materials for Containment and Cleaning Up
None identified.
Environmental Precautions
Dike and contain the spill with sand and earth.
Section 7 - HANDLING AND STORAGE
Conditions for Safe Storage, Including any Incompatibilities
None needed according to classification criteria
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Component Exposure Limits
ACGIH, NIOSH, EU, OSHA (US) and Mexico have not developed exposure limits for any of this
product's components
Biological limit value
There are no biological limit values for any of this product's components.
Engineering Controls
Local exhaust is suggested for use, where possible, in enclosed or confined spaces.
Individual Protection Measures, such as Personal Protective Equipment
Eye/face protection
Safety glasses. It is generally recognized that contact lenses should not be worn when working with
chemicals because they may contribute to the severity of an eye injury.
Skin Protection
Wear rubber gloves, long sleeved shirt and trousers.
Respiratory Protection
Not normally needed.
Glove Recommendations
Wear rubber gloves.
____________________________________________________________
Page 3 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance Powder Physical State solid
Odor Odorless Color White
Odor Threshold Not available pH Not applicable
Melting Point Not available Boiling Point Not applicable
Freezing point Not applicable Evaporation Rate Not applicable
Boiling Point Range Not available Flammability (solid, gas) Not available
Autoignition Not available Flash Point Not available
Lower Explosive Limit Not available Decomposition Not available
Upper Explosive Limit Not available Vapor Pressure Not available
Vapor Density (air=1) Not applicable Specific Gravity (water=1) Not applicable
Water Solubility >10 g/l Partition coefficient: n-octanol/water Not available
Viscosity Not available Solubility (Other) Not available
Density Not available VOC 0
Section 10 - STABILITY AND REACTIVITY
Reactivity
No known hazardous reactions.
Chemical Stability
This is a stable material.
Possibility of Hazardous Reactions
None identified. Hazardous polymerization will not occur.
Conditions to Avoid
Avoid strong oxidizing and reducing agents.
Incompatible Materials
None identified.
Hazardous decomposition products
None identified.
____________________________________________________________
Page 4 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
Thermal decomposition products
None identified.
Section 11 - TOXICOLOGICAL INFORMATION
Acute and Chronic Toxicity
Component Analysis - LD50/LC50
The components of this material have been reviewed in various sources and no selected endpoints have
been identified
Immediate Effects
No information on significant adverse effects.
Delayed Effects
No information on significant adverse effects.
Irritation/Corrosivity Data
No data available.
Respiratory Sensitization
No data available.
Dermal Sensitization
No data available.
Component Carcinogenicity
None of this product's components are listed by ACGIH, IARC, NTP, DFG or OSHA
Germ Cell Mutagenicity
No data available.
Tumorigenic Data
No data available
Reproductive Toxicity
No data available.
Specific Target Organ Toxicity - Single Exposure
No data available.
Specific Target Organ Toxicity - Repeated Exposure
No data available.
Aspiration hazard
No data available.
Medical Conditions Aggravated by Exposure
No data available.
____________________________________________________________
Page 5 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
Section 12 - ECOLOGICAL INFORMATION
Component Analysis - Aquatic Toxicity
No LOLI ecotoxicity data are available for this product's components
Section 13 - DISPOSAL CONSIDERATIONS
Disposal Methods
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
Component Waste Numbers
The U.S. EPA has not published waste numbers for this product's components
Section 14 - TRANSPORT INFORMATION
US DOT Information:
No Classification assigned.
TDG Information:
No Classification assigned.
Section 15 - REGULATORY INFORMATION
U.S. Federal Regulations
None of this products components are listed under SARA Sections 302/304 (40 CFR 355 Appendix A),
SARA Section 313 (40 CFR 372.65), CERCLA (40 CFR 302.4), TSCA 12(b), or require an OSHA
process safety plan.
All components are on the U.S. EPA TSCA Inventory List. Supplier(s) of proprietary component(s) have
stated that their components appear on the Canadian DSL/NDSL.
U.S. State Regulations
None of this product's components are listed on the state lists from CA, MA, MN, NJ or PA
Not listed under California Proposition 65
Canada Regulations
This product is not WHMIS controlled.
Section 16 - OTHER INFORMATION
____________________________________________________________
Page 6 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
Safety Data Sheet
Material Name: EPI Dry Polymer SDS ID: EPI-0433c
HMIS Rating
Health: 1 Fire: 0 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe * = Chronic hazard
NFPA Ratings
Health: 1 Fire: 0 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
Key / Legend
ACGIH - American Conference of Governmental Industrial Hygienists; ADR - European Road Transport;
AU - Australia; BOD - Biochemical Oxygen Demand; C - Celsius; CA - Canada; CAS - Chemical
Abstracts Service; CERCLA - Comprehensive Environmental Response, Compensation, and Liability
Act; CLP - Classification, Labelling, and Packaging; CN - China; CPR - Controlled Products
Regulations; DFG - Deutsche Forschungsgemeinschaft; DOT - Department of Transportation; DSD -
Dangerous Substance Directive; DSL - Domestic Substances List; EEC - European Economic
Community; EINECS - European Inventory of Existing Commercial Chemical Substances; EPA -
Environmental Protection Agency; EU - European Union; F - Fahrenheit; IARC - International Agency
for Research on Cancer; IATA - International Air Transport Association; ICAO - International Civil
Aviation Organization; IDL - Ingredient Disclosure List; IDLH - Immediately Dangerous to Life and
Health; IMDG - International Maritime Dangerous Goods; JP - Japan; Kow - Octanol/water partition
coefficient; KR - Korea; LEL - Lower Explosive Limit; LLV - Level Limit Value; LOLI - List Of LIsts™
- ChemADVISOR’s Regulatory Database; MAK - Maximum Concentration Value in the Workplace;
MEL - Maximum Exposure Limits; NFPA - National Fire Protection Agency; NIOSH - National Institute
for Occupational Safety and Health; NJTSR - New Jersey Trade Secret Registry; NTP - National
Toxicology Program; NZ - New Zealand; OSHA - Occupational Safety and Health Administration; PH -
Philippines; RCRA - Resource Conservation and Recovery Act; REACH- Registration, Evaluation,
Authorisation, and restriction of Chemicals; RID - European Rail Transport; SARA - Superfund
Amendments and Reauthorization Act; STEL - Short-term Exposure Limit; TDG - Transportation of
Dangerous Goods; TSCA - Toxic Substances Control Act; TWA - Time Weighted Average; UEL - Upper
Explosive Limit; US - United States.
____________________________________________________________
Page 7 of 7 Issue date: 2015-10-12 Revision 1.0 Print date: 2015-10-12
