Scribd
Upload
538 views3 pages

Installation INPA - EDIABAS FULL-English-Edition: Delete ALL

This document provides instructions for installing INPA-ADS software and configuring an OBD adapter to work with BMW vehicles. The instructions include deleting existing INPA software, running setup files, installing drivers, editing configuration files, and rebooting. Key steps are to install the software to the C drive only, configure the COM port number and latency timer matched to the USB port used, and run INPA with the adapter plugged into the vehicle and USB port after turning on the ignition.

Uploaded by

Вячеслав Глушак
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
538 views3 pages

Installation INPA - EDIABAS FULL-English-Edition: Delete ALL

This document provides instructions for installing INPA-ADS software and configuring an OBD adapter to work with BMW vehicles. The instructions include deleting existing INPA software, running setup files, installing drivers, editing configuration files, and rebooting. Key steps are to install the software to the C drive only, configure the COM port number and latency timer matched to the USB port used, and run INPA with the adapter plugged into the vehicle and USB port after turning on the ignition.

Uploaded by

Вячеслав Глушак
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Installation INPA – EDIABAS FULL-English-Edition

1) Delete ALL versions of INPA-ADS from your computer or remane all INPA-ADS folders.
For example: remane INPA into “_INPA”, EDIABAS into “_EDIABAS” and so on.

2) Open folder Step_1\ in the root of CD-disk given. Copy folder EC-APPS onto disk С:\
3) Run file Step_1\NFS\Entpackt\disk1\SETUP.EXE
While installing choose User Mode
Further choose in opening windows:
1. Parametrieren einer neuen Konfiguration ohne Daten
2. OBD
3. Kein API-TRACE
4. Kein IFH-TRACE
5. Komfort (.IPO)

! RE-BOOT YOUR Computer !

4) Run file Step_2\INSTALL\Instprog.exe


1. Choose ENGLISH, press Continue, then press Continue again
2. While choosing the HDD disk for initial setup do not change letter C:\.
Your
installation must be on drive С:\ ONLY !
3. Choose configuration BMW Group Rectification programs UK, press Continue.
4. Activate all spare boxes with : EDIABAS 6.4.3 - UPDATE, INPA 5.0.1 - UPDATE,
NCS Expert 3.0.8 - Complete
5. Press Continue.

5) Run file Step_3\INSTALL\Instprog.exe


1. Choose ENGLISH, press Continue, then press Continue again
2. While choosing the HDD disk for initial setup do not change letter C:\.
Your
installation must be on drive С:\ ONLY !
3. Choose configuration BMW Group Rectification programs UK, press Continue.
4. Activate all spare boxes with: INPA 5.0.1 - UPDATE, NCS Expert 3.0.8 - UPDATE
5. Press Continue.

6) Find the file С:\EC-APPS\INPA\CFGDAT\ named inpa.ini and replace it with


the file inpa.ini that is in the root directory of CD-disk given.

7) Plug the Adapter into spare USB-port and install drivers manually from the
folder Driver_D_CAN_USB using Driver Wizard of your Windows XP-Service Pack-2
8)Use following pictures for help.

9) In Advanced field change number of COM-port to the value from 2 to 4. Also change the
value of Latency Timer from 16 to 1. Remember the number of the COM-port choosen !

10) In the file EDIABAS.INI "Interface = STD:OBD" must be choosen


(That is default parameter after installing from CD-disk given. Check the parameter if you use
another version of INPA !)
11) In the file C:\Windows\OBD.INI put the number of USB-COM-port to the value that you
remembered in the step_3

12) Run from CD-disk a file Driver_D_CAN_USB\OBDSetup.exe

14) RE-BOOT your Computer !

15) Use the following order of using adaptor:


- Plug the Adaptor into spare USB-port
- Plug the Adaptor into OBD-II connector of BMW
- Turn the Ignition into ON position
- Rune the soft INPA with file С:\EC-APPS\INPA\BIN\inpaload.exe
- Choose the model of BMW and type of modul you want to see
- Close the soft and disconnect the Adaptor from USB-port each time you change the
car
connected

N.B.:
Your Adaptor is already configurated to work with BMW both K-line and CAN-bus.
Modes of configurator file D-CAN.exe, that is on the CD-disk given in the
folder
_D_CAN_USB as follows:

----------------------------------Configuration--------------------------------------------
For configuration interface:
Connect USB cable
Run D-CAN.EXE and setup CAN BUS mode.
LED should OFF
Don't use USB Extender cable, directly connect interface to computer.

You might also like