ECODB665v02
Trisector Antenna 790-960 1710-2690
Half Power Beam Width 65º 65º
Adjust. Electr. Downtilt 0º-10º 2º-8º
Kathrein XXPol Trisector 790-960/1710-2690 65º/65º 16/18.5dBi 0º-10º/2º-8ºT
790-960 1710-2690
Frequency Range
790-862 MHz 824-894 MHz 880-960 MHz 1710-1880 MHz 1850-1990 MHz 1920-2170 MHz 2300-2400 MHz 2490-2690 MHz
Polarization ± 45º ± 45º ± 45º ± 45º ± 45º ± 45º ± 45º ± 45º
Average Gain (dBi) 16.1…16.1…15.6 16.1…16.2…15.8 16.1…16.2…15.8 18.2…18.3…18.0 18.4…18.4…18.1 18.7…18.7…18.2 18.9…18.7…18.0 18.2…18.7…18.4
Horizontal Pattern
Half Power Beam Width 68º 67º 65º 63º 63º 62º 61º 63º
Front to Back Ratio > 27 dB > 27 dB > 27 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Cross Polar Ratio Typically: Typically: Typically: Typically: Typically: Typically: Typically: Typically:
Main Direction 0º 28 dB 27 dB 23 dB 18 dB 22 dB 23 dB 20 dB 25 dB
Sector ± 60º > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB
Vertical Pattern
Half Power Beam Width 10.0º 9.8º 9.5º 5.0º 4.8º 4.4º 3.9º 3.5º
Electrical Tilt 0º-10º, continuously adjustable 2º-8º, continuously adjustable
Sidelobe Suppr. for First 0º…5º…10ºT 0º…5º…10ºT 0º…5º…10ºT 2º…5º…8ºT 2º…5º…8ºT 2º…5º…8ºT 2º…5º…8ºT 2º…5º…8ºT
Sidelobe above Main Beam 18…17…15 dB 18…18…16 dB 18…18…16 dB 17…18…19 dB 18…18…19 dB 18…18…19 dB 18…18…18 dB 17…18…19 dB
Within 0º-20º sector above 18…15…16 dB 18…16…15 dB 18…16…14 dB 16…16…17 dB 17…16…18 dB 17…17…16 dB 18…18…15 dB 16…18…14 dB
Impedance 50 Ω
VSWR < 1.5
Isolation: Intrasystem > 30 dB > 28 dB
Isolation: Intersystem > 30 dB (790-960 // 1710-2690 MHz)
Intermodulation IM3 IM3:< - 150 dBc (2 x 43 dBm carrier)
Max. Power per Input 500 W (at 50 ºC ambient temperature) 200 W (at 50 ºC ambient temperature)
Total Power 1000 W (at 50 ºC ambient temperature) 400 W (at 50 ºC ambient temperature)
Mechanical Specifications
Input 12 x 7-16 female
Connector Position Bottom
Tilt Setting 6 x at bottom
Antenna Weight Approx. 120 kg
Service Area Weight Approx. 55 kg
Sector Azimuth Adjust. ± 10º
Max Wind Velocity 165 km/h
Antenna Windload at 165 km/h 1090N
Antenna height/diameter 2040 / 550 mm
Service Area height/diameter 750 / 566 mm
Electrical datas shown in this dataseet is subjet to change w/o previous notice
(*) The antenna can also be used on Tilt 0 by relaxing the specs.
Powered by :
page 1/2
Accessories / General Information
SERVICE AREA (ECOSA75v02)
The Service Area is supplied as a separated module and allows easy and safe access
to the settings of the antenna. The Azimuth can be adjusted independently per sector into
the range described in the datasheet. The tilt range shall be set according to Kathrein Werke
recommendations. The Service area is valid for RCUs, DTMA and Mux installation.
Please ask your local partner or ESB SISTEMAS for further information.
FLANGE INTERFACE
Two differents flanges interfaxes can be supplied in order to make an easier and customize
installation on site. Default flange interface is RING method and optional
SLIM POLE method (order separately) as shown below:
RING INTERFACE SLIM POLE INTERFACE
ACCESSORIES (OPTIONAL)
To be ordered separately
PART NUMBER DESCRIPTION
ECOSPI Slim Pole Interface
86010147_8 Kathrein RCU AISG1.1 or AISG2.0 3GPP
78210XXX Kathrein DTMA (please ask for the different types)
SHIPPING INFORMATION
PACKING QUANTITY LxWxH (mm) WEIGHT
ECODB665v02+SA 1x 2990x610x740 255 kg
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issued has now become invalid.
www.esbsistemas.com page 2/2
