T 350
T-Racer
12" Hard Surface Cleaner
Designed for gasoline pressure washers
with screw-on trigger guns up to 2650 PSI.
12" Nettoyeur de surface dure
Adaptable aux nettoyeurs haute pression avec
moteur à essence d´une puissance a 2650 lb/po2.
12" Lavador de superficies duras
Para lavadoras de presión a gasolina a 2650 PSI.
2.641005.0
English ................. 2
Español ................ 8
Français ............. 14
5.961521.0 (05/05)
Downloaded from http://nothickmanuals.info
T 350 OVERVIEW
Item Description Item Description
1 Nozzle height adjustment 4 Housing
2 Hand grip 5 Handle (2 piece)
3 Air flow control (hovering effect) 6 Adaptor
Kärcher Support USA
Call: 1-800-537-4129 for help
or visit our website: www.karcher-usa.com/home
Kärcher Customer Service CDN
Call: 1-800-465-4980 for help
or visit our website: www.karcher.ca
Kärcher Support Mexico
Call: 01-800-024-13-13 for help
or visit our website: www.karcher.com.mx
Downloaded from http://nothickmanuals.info
IMPORTANT SAFETY INSTRUCTIONS
WARNING When using this CAUTION!
product basic precautions should Do not use on windows.
always be followed, including the
The T-Racer is not suited for
following:
scouring or scrubbing!
Read all the instructions before
Do not run over freestanding
using the product.
corners!
Please observe the safety instruc-
For the optimum setting, test the
tions of your pressure washer.
TRacer in an inconspicuous area.
The T-Racer must not be used by
Never operate in the same area
children.
for more than 2 seconds, damage
Only trigger the gun of the pressure may occur.
washer if the T-Racer is located on
the surface to be cleaned.
Keep all persons/animals clear of
Intended Use
the immediate vicinity of the
cleaning head. The T 350 T-Racer can be used with
all Kärcher gasoline pressure wash-
Keep hands away from moving
ers with 2400 to 2650 PSI and most 3
parts.
other gasoline pressure washers with
Turn off the pressure washer when screw-on trigger guns up to 2650 PSI
examining or changing the T-Racer (with included adaptor).
and after the completion of the
Use on horizontal surfaces like drive-
cleaning operation.
ways, patios, side walks, etc.
Maximum water temperature Use on vertical surfaces like brick
allowed is 140 °F/ 60 °C. Please walls, hardiplank, stucco and other
follow the instructions for your siding. (Always test in inconspicuous
pressure washer. area first.)
The T350 has not been designed for
commercial use. Commercial users
should consider Kärcher`s FR 30 Hard
SAVE THESE INSTRUCTIONS Surface Cleaner
Downloaded from http://nothickmanuals.info
ASSEMBLY INSTRUCTIONS
Step 1 Step 2
Insert upper handle into the lower Insert lower handle into main
handle by twisting together. housing.
Turn collar clockwise until tight.
Step 3 Step 3
For Kärcher with male screw-on For female screw-on trigger gun.
trigger gun. Screw adaptor on female screw-on
Insert male screw-on trigger gun trigger gun.
into upper handle. Insert trigger gun with adaptor into
Turn collar clockwise until tight. upper handle.
Turn collar clockwise until tight.
Cleaning vertical surfaces
Connect the T-Racer directly with the trigger gun.
Downloaded from http://nothickmanuals.info
OPERATION CONTROLS
Spray Power Air Flow Control
Adjust height of propeller spray head. Adjust the hovercraft effect of the
T-Racer by pushing the Air Flow Con-
For sensitive surfaces trol into one of the positions from No
Turn nozzle height adjustment hovercraft effect to Full hovercraft
clockwise. effect.
For hard surfaces No hovercraft effect 5
Turn nozzle height adjustment (Air flow vents closed)
counterclockwise. Push counterclockwise to the stop.
Full hovercraft effect
(Air flow vents opened)
Push clockwise to the stop.
Please Note:
For optimum setting test the T-Racer in an inconspicuous area first.
Never operate in the same area for more than 2 seconds, damage
may occur.
Do not use on windows.
Downloaded from http://nothickmanuals.info
APPLICATION DIRECTIONS
Suggested Settings for Typical Applications
Horizontal Wood and Decks
Adjust height of the spray
head clockwise.
Open the air flow vents.
Vertical Wood, Siding and Facades
Connect the T-Racer directly
with the trigger gun.
Adjust height of the spray
head clockwise.
Close the air flow vents.
Do not use on windows.
6
Horizontal Tile, Concrete and Stone
Adjust height of the spray
head counterclockwise.
Open the air flow vents.
Vertical Tile, Concrete and Stone
Connect the T-Racer directly
with the trigger gun.
Adjust height of the spray
head counterclockwise.
Close the air flow vents.
Cleaning of vertical surfaces:
Always hold Trigger Gun and T-Racer with both hands.
Do not reach under the edge of the T-Racer while the device is in operation.
Downloaded from http://nothickmanuals.info
REPLACEMENT OF THE NOZZLES
Note: The nozzles must be
removed for cleaning or for the
exchange of the nozzles.
1. Remove the clamp.
2. Pull out the old nozzle.
3. Insert the new nozzle.
4. Secure nozzle with clamp.
Kärcher Support USA
Call: 1-800-537-4129 for help
or visit our website: www.karcher-usa.com/home
Kärcher Customer Service CDN
Call: 1-800-465-4980 for help
or visit our website: www.karcher.ca
Kärcher Support Mexico
Call: 01-800-024-13-13 for help
or visit our website: www.karcher.com.mx
Downloaded from http://nothickmanuals.info
PARTS LIST
Downloaded from http://nothickmanuals.info
