Correlation Matrix
www.pepperstone.com
1. About correlation ........................................................................................................ 3
2. Using the Correlation Matrix...................................................................................... 4
2.1 The matrix............................................................................................................. 4
2.2 Changing the parameters for the calculation .................................................... 5
2.3 Highlighting correlation strength ........................................................................ 5
2.4 Trade list ............................................................................................................... 5
2
www.pepperstone.com
1. About correlation
The Correlation Matrix shows the correlation between symbols over a configurable timeframe and
number of bars, for example the last 100 H1 bars.
Correlation is measured on a scale from -100 to +100:
• +100 means that the price movements in symbol A and B have been identical (“positive
correlation”).
• -100 means that the price movements in symbol A and B have been exactly opposite: A went
up when B went down, and vice versa (“negative correlation”).
• 0 means that the symbols have moved independently.
Correlation can have a major effect on your trading risk. For example the following charts show H1
EURUSD and USDCHF over the same time period:
These symbols had very strong negative correlation (about -95). If you were long EURUSD and short
USDCHF over this period, or vice versa, then you would have seen very similar profits on both
positions. In effect, you did not have two positions: you only really had one position. (If you were long
both symbols, or short both symbols, then you probably had a profit on one and a matching loss on
the other.)
It is generally advisable to minimise the correlation between your open positions. Otherwise, you are
either trading the same price action twice over, or you have two positions which cancel each other
out.
The Correlation Matrix helps you to identify symbols with strong or weak correlation.
3
www.pepperstone.com
2. Using the Correlation Matrix
2.1 The matrix
The Correlation Matrix shows the correlation between a grid of selected symbols. For example:
Each cell in the matrix is color-coded:
Green. No correlation (0 to ± 25)
Blue. Weak correlation. (±25 to ±50)
Orange. Medium correlation. (±50 to ±75)
Red. Strong correlation. (±75 to ±100)
It makes little difference whether values are positive or negative (e.g. +90 or -90), and the meaning
depends on whether you are long or short each symbol. For example:
• +90. If you are long both symbols, or short both symbols, then you will tend to see identical
profits or losses on both positions. If you are long one symbol and short the other, then you
will tend to have a matching profit and loss.
• -90. If you are long both symbols, or short both symbols, then you will tend to have a
matching profit and loss. If you are long one symbol and short the other, then you will tend to
see identical profits or losses on both positions.
The chequered cells show rows and columns which are the same (i.e. correlation of EURUSD against
itself is meaningless). The grid is symmetrical either side of the chequered line: e.g. the correlation of
EURUSD against USDCHF is the same as the correlation of USDCHF against EURUSD.
4
www.pepperstone.com
2.2 Changing the parameters for the calculation
You can use the fields at the top of the matrix to choose a timeframe (e.g. H1, D1) and a number of
historic bars (e.g. 25, 100, 500).
Correlation between symbols changes over time, and recent correlation may not continue in future. As
a general rule, the settings which you choose should be related to how long you intend to keep open
positions for. For example, if you expect a position to be open for 24 hours, you might want to look at
H1 correlation over the last 50 or 100 bars (roughly 2 or 4 days).
You can choose which symbols to include in the Matrix by using the … button. This shows the list of
symbols which are currently being displayed, and a list of all available symbols.
2.3 Highlighting correlation strength
The strength field, next to the bars field, lets you highlight different types of correlation in the grid. For
example, if you pick “Strong” then the grid highlights correlation above ±75, and grays out all weaker
correlations.
2.4 Trade list
The Trade List button shows the average correlation between a list of selected symbols – for
example, positions you are currently trading, or positions which you intend to open in future.
The list shows the average correlation, and also marks any symbols which have strong correlation
with another symbol on the list. In the following example the overall average is weak correlation, but
AUDUSD and NZDUSD have strong correlation with each other:
5
www.pepperstone.com
Level 16, Tower One Local Call 1300 033 375 www.pepperstone.com
727 Collins Street Phone +61 3 9020 0155 support@pepperstone.com
Melbourne VIC 3008 Fax +61 3 8679 4408
AUSTRALIA
