SFP.

Breather caps
with splash guard

ELESA Original design

technical informations
Cover and threaded connector
Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Colour

- Cover: RAL 2004 orange, semi-matte finish, marked "OIL".

Flat packing ring

NBR synthetic rubber.

Splash guard

Technopolymer.

Standard executions available

- SFP.: without air filter (black splash guard).

- SFP.70-BA+F: with "tech-foam" air filter in polyurethane foam mesh (polyester base), air filtration 40 µ (grey splash guard)
and zinc-plated steel sheet bayonet and chrome-plated steel safety chain.

Maximum continuous working temperature

120°C for execution without air filter or with "tech-fil" air filter.
100°C for execution with "tech-foam" air filter.

Special executions on request (For sufficient quantities)

- Cover, RAL 2004 orange, without "OIL" mark.

Features and applications

SFP. breather caps come complete with splash guard device (ELESA original design) that prevents oil loss and are particularly
suitable for use where oil is violently agitated and could be splashed against breather cap.

Technical data

Air flow rate for each model can be determined from the graph calculating the difference between the pressure inside and
outside the reservoir.
 Standard Elements Main dimensions Weight

Code Description d h D L d2 g

53941 SFP.30-16x1.5 M16x1.5 9.5 31 29.5 10 10

53961 SFP.30-18x1.5 M18x1.5 9.5 31 29.5 10 10

53981 SFP.30-20x1.5 M20x1.5 9.5 31 29.5 12 11

53991 SFP.30-22x1.5 M22x1.5 9.5 31 29.5 12 11

Standard Elements Main dimensions Weight

Code Description d h D L d2 g

53935# SFP.30-1/4 G 1/4 9.5 31 29.5 8 10

54001 SFP.30-3/8 G 3/8 9.5 31 29.5 10 11

54101 SFP.30-1/2 G 1/2 9.5 31 29.5 12 11

56651# SFP.40-3/8 G 3/8 11.5 42 36.5 10 20

56671# SFP.40-1/2 G 1/2 11.5 42 36.5 12 22

54201# SFP.40-3/4 G 3/4 11.5 42 36.5 18 22

54301 SFP.40-1 G1 11.5 42 36.5 18 22

56701# SFP.57-3/4 G 3/4 14 57 42 18 40

56731 SFP.57-1 G1 14 57 42 23 40

54401 SFP.57-1¼ G 1¼ 16 57 44 32 41

54501 SFP.57-1½ G 1½ 16 57 44 32 45

54876 SFP.70-2 G2 17 70 59 23 82

# Types available on request with NPT thread (National Taper pipe Thread - ANSI-ASME B1-20).
Standard Elements
Main dimensions Weight
Tech-fil Tech-foam
 Code Description d h D L d2 d3 d4 h1 g

53951 53952 SFP.30-16x1.5+F* M16x1.5 9.5 31 29.5 10 - - - 12

53971 53972 SFP.30-18x1.5+F* M18x1.5 9.5 31 29.5 10 - - - 13

53986 53987 SFP.30-20x1.5+F* M20x1.5 9.5 31 29.5 12 - - - 13

53996 53997 SFP.30-22x1.5+F* M22x1.5 9.5 31 29.5 12 - - - 14

* Complete the description of the standard item needed by adding the type of the air filter tech-fil or tech-foam listed in the code
column.
Standard Elements
Main dimensions Weight
Tech-fil Tech-foam

Code Description d h D L d2 d3 d4 h1 g

53937 53938 SFP.30-1/4+F* G 1/4 9.5 31 29.5 8 - - - 11

54021 54022 SFP.30-3/8+F* G 3/8 9.5 31 29.5 10 - - - 13

54121 54122 SFP.30-1/2+F* G 1/2 9.5 31 29.5 12 - - - 15

56661 56662# SFP.40-3/8+F* G 3/8 11.5 42 36.5 10 - - - 23

56681 56682# SFP.40-1/2+F* G 1/2 11.5 42 36.5 12 - - - 26

54221 54222# SFP.40-3/4+F* G 3/4 11.5 42 36.5 18 - - - 28

54321 54322 SFP.40-1+F* G1 11.5 42 36.5 18 - - - 24

56711 56712# SFP.57-3/4+F* G 3/4 14 57 42 18 - - - 50

56741 56742 SFP.57-1+F* G1 14 57 42 23 - - - 50

54421 54422 SFP.57-1¼+F* G 1¼ 16 57 44 32 - - - 50

54521 54522 SFP.57-1½+F* G 1½ 16 57 44 32 - - - 54

- 54851# SFP.70-3/4+F* G 3/4 15 70 63 16 35 - 6 80

- 54861 SFP.70-1¼+F* G 1¼ 17 70 59 23 - - - 80

- 54878 SFP.70-2+F* G2 17 70 59 23 - - - 85

- 54881 SFP.70-BA+F* - 14 70 56 23 - 39 - 91

* Complete the description of the standard item needed by adding the type of the air filter tech-fil or tech-foam listed in the code
column.# Types available on request with NPT thread (National Taper pipe Thread - ANSI-ASME B1-20).

This product had the following design awards:

ELESA and GANTER models all rights reserved in accordance with the law. Always mention the source when reproducing our
drawings.